1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 #ifndef __ASPEED_VHUB_H 3 #define __ASPEED_VHUB_H 4 5 #include <linux/usb.h> 6 #include <linux/usb/ch11.h> 7 8 /***************************** 9 * * 10 * VHUB register definitions * 11 * * 12 *****************************/ 13 14 #define AST_VHUB_CTRL 0x00 /* Root Function Control & Status Register */ 15 #define AST_VHUB_CONF 0x04 /* Root Configuration Setting Register */ 16 #define AST_VHUB_IER 0x08 /* Interrupt Ctrl Register */ 17 #define AST_VHUB_ISR 0x0C /* Interrupt Status Register */ 18 #define AST_VHUB_EP_ACK_IER 0x10 /* Programmable Endpoint Pool ACK Interrupt Enable Register */ 19 #define AST_VHUB_EP_NACK_IER 0x14 /* Programmable Endpoint Pool NACK Interrupt Enable Register */ 20 #define AST_VHUB_EP_ACK_ISR 0x18 /* Programmable Endpoint Pool ACK Interrupt Status Register */ 21 #define AST_VHUB_EP_NACK_ISR 0x1C /* Programmable Endpoint Pool NACK Interrupt Status Register */ 22 #define AST_VHUB_SW_RESET 0x20 /* Device Controller Soft Reset Enable Register */ 23 #define AST_VHUB_USBSTS 0x24 /* USB Status Register */ 24 #define AST_VHUB_EP_TOGGLE 0x28 /* Programmable Endpoint Pool Data Toggle Value Set */ 25 #define AST_VHUB_ISO_FAIL_ACC 0x2C /* Isochronous Transaction Fail Accumulator */ 26 #define AST_VHUB_EP0_CTRL 0x30 /* Endpoint 0 Contrl/Status Register */ 27 #define AST_VHUB_EP0_DATA 0x34 /* Base Address of Endpoint 0 In/OUT Data Buffer Register */ 28 #define AST_VHUB_EP1_CTRL 0x38 /* Endpoint 1 Contrl/Status Register */ 29 #define AST_VHUB_EP1_STS_CHG 0x3C /* Endpoint 1 Status Change Bitmap Data */ 30 #define AST_VHUB_SETUP0 0x80 /* Root Device Setup Data Buffer0 */ 31 #define AST_VHUB_SETUP1 0x84 /* Root Device Setup Data Buffer1 */ 32 33 /* Main control reg */ 34 #define VHUB_CTRL_PHY_CLK (1 << 31) 35 #define VHUB_CTRL_PHY_LOOP_TEST (1 << 25) 36 #define VHUB_CTRL_DN_PWN (1 << 24) 37 #define VHUB_CTRL_DP_PWN (1 << 23) 38 #define VHUB_CTRL_LONG_DESC (1 << 18) 39 #define VHUB_CTRL_ISO_RSP_CTRL (1 << 17) 40 #define VHUB_CTRL_SPLIT_IN (1 << 16) 41 #define VHUB_CTRL_LOOP_T_RESULT (1 << 15) 42 #define VHUB_CTRL_LOOP_T_STS (1 << 14) 43 #define VHUB_CTRL_PHY_BIST_RESULT (1 << 13) 44 #define VHUB_CTRL_PHY_BIST_CTRL (1 << 12) 45 #define VHUB_CTRL_PHY_RESET_DIS (1 << 11) 46 #define VHUB_CTRL_SET_TEST_MODE(x) ((x) << 8) 47 #define VHUB_CTRL_MANUAL_REMOTE_WAKEUP (1 << 4) 48 #define VHUB_CTRL_AUTO_REMOTE_WAKEUP (1 << 3) 49 #define VHUB_CTRL_CLK_STOP_SUSPEND (1 << 2) 50 #define VHUB_CTRL_FULL_SPEED_ONLY (1 << 1) 51 #define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) 52 53 /* IER & ISR */ 54 #define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) 55 #define VHUB_IRQ_EP_POOL_NAK (1 << 17) 56 #define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) 57 #define VHUB_IRQ_DEVICE5 (1 << 13) 58 #define VHUB_IRQ_DEVICE4 (1 << 12) 59 #define VHUB_IRQ_DEVICE3 (1 << 11) 60 #define VHUB_IRQ_DEVICE2 (1 << 10) 61 #define VHUB_IRQ_DEVICE1 (1 << 9) 62 #define VHUB_IRQ_BUS_RESUME (1 << 8) 63 #define VHUB_IRQ_BUS_SUSPEND (1 << 7) 64 #define VHUB_IRQ_BUS_RESET (1 << 6) 65 #define VHUB_IRQ_HUB_EP1_IN_DATA_ACK (1 << 5) 66 #define VHUB_IRQ_HUB_EP0_IN_DATA_NAK (1 << 4) 67 #define VHUB_IRQ_HUB_EP0_IN_ACK_STALL (1 << 3) 68 #define VHUB_IRQ_HUB_EP0_OUT_NAK (1 << 2) 69 #define VHUB_IRQ_HUB_EP0_OUT_ACK_STALL (1 << 1) 70 #define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) 71 #define VHUB_IRQ_ACK_ALL 0x1ff 72 73 /* SW reset reg */ 74 #define VHUB_SW_RESET_EP_POOL (1 << 9) 75 #define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) 76 #define VHUB_SW_RESET_DEVICE5 (1 << 5) 77 #define VHUB_SW_RESET_DEVICE4 (1 << 4) 78 #define VHUB_SW_RESET_DEVICE3 (1 << 3) 79 #define VHUB_SW_RESET_DEVICE2 (1 << 2) 80 #define VHUB_SW_RESET_DEVICE1 (1 << 1) 81 #define VHUB_SW_RESET_ROOT_HUB (1 << 0) 82 83 /* EP ACK/NACK IRQ masks */ 84 #define VHUB_EP_IRQ(n) (1 << (n)) 85 86 /* USB status reg */ 87 #define VHUB_USBSTS_HISPEED (1 << 27) 88 89 /* EP toggle */ 90 #define VHUB_EP_TOGGLE_VALUE (1 << 8) 91 #define VHUB_EP_TOGGLE_SET_EPNUM(x) ((x) & 0x1f) 92 93 /* HUB EP0 control */ 94 #define VHUB_EP0_CTRL_STALL (1 << 0) 95 #define VHUB_EP0_TX_BUFF_RDY (1 << 1) 96 #define VHUB_EP0_RX_BUFF_RDY (1 << 2) 97 #define VHUB_EP0_RX_LEN(x) (((x) >> 16) & 0x7f) 98 #define VHUB_EP0_SET_TX_LEN(x) (((x) & 0x7f) << 8) 99 100 /* HUB EP1 control */ 101 #define VHUB_EP1_CTRL_RESET_TOGGLE (1 << 2) 102 #define VHUB_EP1_CTRL_STALL (1 << 1) 103 #define VHUB_EP1_CTRL_ENABLE (1 << 0) 104 105 /*********************************** 106 * * 107 * per-device register definitions * 108 * * 109 ***********************************/ 110 #define AST_VHUB_DEV_EN_CTRL 0x00 111 #define AST_VHUB_DEV_ISR 0x04 112 #define AST_VHUB_DEV_EP0_CTRL 0x08 113 #define AST_VHUB_DEV_EP0_DATA 0x0c 114 115 /* Device enable control */ 116 #define VHUB_DEV_EN_SET_ADDR(x) ((x) << 8) 117 #define VHUB_DEV_EN_ADDR_MASK ((0xff) << 8) 118 #define VHUB_DEV_EN_EP0_NAK_IRQEN (1 << 6) 119 #define VHUB_DEV_EN_EP0_IN_ACK_IRQEN (1 << 5) 120 #define VHUB_DEV_EN_EP0_OUT_NAK_IRQEN (1 << 4) 121 #define VHUB_DEV_EN_EP0_OUT_ACK_IRQEN (1 << 3) 122 #define VHUB_DEV_EN_EP0_SETUP_IRQEN (1 << 2) 123 #define VHUB_DEV_EN_SPEED_SEL_HIGH (1 << 1) 124 #define VHUB_DEV_EN_ENABLE_PORT (1 << 0) 125 126 /* Interrupt status */ 127 #define VHUV_DEV_IRQ_EP0_IN_DATA_NACK (1 << 4) 128 #define VHUV_DEV_IRQ_EP0_IN_ACK_STALL (1 << 3) 129 #define VHUV_DEV_IRQ_EP0_OUT_DATA_NACK (1 << 2) 130 #define VHUV_DEV_IRQ_EP0_OUT_ACK_STALL (1 << 1) 131 #define VHUV_DEV_IRQ_EP0_SETUP (1 << 0) 132 133 /* Control bits. 134 * 135 * Note: The driver relies on the bulk of those bits 136 * matching corresponding vHub EP0 control bits 137 */ 138 #define VHUB_DEV_EP0_CTRL_STALL VHUB_EP0_CTRL_STALL 139 #define VHUB_DEV_EP0_TX_BUFF_RDY VHUB_EP0_TX_BUFF_RDY 140 #define VHUB_DEV_EP0_RX_BUFF_RDY VHUB_EP0_RX_BUFF_RDY 141 #define VHUB_DEV_EP0_RX_LEN(x) VHUB_EP0_RX_LEN(x) 142 #define VHUB_DEV_EP0_SET_TX_LEN(x) VHUB_EP0_SET_TX_LEN(x) 143 144 /************************************* 145 * * 146 * per-endpoint register definitions * 147 * * 148 *************************************/ 149 150 #define AST_VHUB_EP_CONFIG 0x00 151 #define AST_VHUB_EP_DMA_CTLSTAT 0x04 152 #define AST_VHUB_EP_DESC_BASE 0x08 153 #define AST_VHUB_EP_DESC_STATUS 0x0C 154 155 /* EP config reg */ 156 #define VHUB_EP_CFG_SET_MAX_PKT(x) (((x) & 0x3ff) << 16) 157 #define VHUB_EP_CFG_AUTO_DATA_DISABLE (1 << 13) 158 #define VHUB_EP_CFG_STALL_CTRL (1 << 12) 159 #define VHUB_EP_CFG_SET_EP_NUM(x) (((x) & 0xf) << 8) 160 #define VHUB_EP_CFG_SET_TYPE(x) ((x) << 5) 161 #define EP_TYPE_OFF 0 162 #define EP_TYPE_BULK 1 163 #define EP_TYPE_INT 2 164 #define EP_TYPE_ISO 3 165 #define VHUB_EP_CFG_DIR_OUT (1 << 4) 166 #define VHUB_EP_CFG_SET_DEV(x) ((x) << 1) 167 #define VHUB_EP_CFG_ENABLE (1 << 0) 168 169 /* EP DMA control */ 170 #define VHUB_EP_DMA_PROC_STATUS(x) (((x) >> 4) & 0xf) 171 #define EP_DMA_PROC_RX_IDLE 0 172 #define EP_DMA_PROC_TX_IDLE 8 173 #define VHUB_EP_DMA_IN_LONG_MODE (1 << 3) 174 #define VHUB_EP_DMA_OUT_CONTIG_MODE (1 << 3) 175 #define VHUB_EP_DMA_CTRL_RESET (1 << 2) 176 #define VHUB_EP_DMA_SINGLE_STAGE (1 << 1) 177 #define VHUB_EP_DMA_DESC_MODE (1 << 0) 178 179 /* EP DMA status */ 180 #define VHUB_EP_DMA_SET_TX_SIZE(x) ((x) << 16) 181 #define VHUB_EP_DMA_TX_SIZE(x) (((x) >> 16) & 0x7ff) 182 #define VHUB_EP_DMA_RPTR(x) (((x) >> 8) & 0xff) 183 #define VHUB_EP_DMA_SET_RPTR(x) (((x) & 0xff) << 8) 184 #define VHUB_EP_DMA_SET_CPU_WPTR(x) (x) 185 #define VHUB_EP_DMA_SINGLE_KICK (1 << 0) /* WPTR = 1 for single mode */ 186 187 /******************************* 188 * * 189 * DMA descriptors definitions * 190 * * 191 *******************************/ 192 193 /* Desc W1 IN */ 194 #define VHUB_DSC1_IN_INTERRUPT (1 << 31) 195 #define VHUB_DSC1_IN_SPID_DATA0 (0 << 14) 196 #define VHUB_DSC1_IN_SPID_DATA2 (1 << 14) 197 #define VHUB_DSC1_IN_SPID_DATA1 (2 << 14) 198 #define VHUB_DSC1_IN_SPID_MDATA (3 << 14) 199 #define VHUB_DSC1_IN_SET_LEN(x) ((x) & 0xfff) 200 #define VHUB_DSC1_IN_LEN(x) ((x) & 0xfff) 201 202 /**************************************** 203 * * 204 * Data structures and misc definitions * 205 * * 206 ****************************************/ 207 208 /* 209 * AST_VHUB_NUM_GEN_EPs and AST_VHUB_NUM_PORTS are kept to avoid breaking 210 * existing AST2400/AST2500 platforms. AST2600 and future vhub revisions 211 * should define number of downstream ports and endpoints in device tree. 212 */ 213 #define AST_VHUB_NUM_GEN_EPs 15 /* Generic non-0 EPs */ 214 #define AST_VHUB_NUM_PORTS 5 /* vHub ports */ 215 #define AST_VHUB_EP0_MAX_PACKET 64 /* EP0's max packet size */ 216 #define AST_VHUB_EPn_MAX_PACKET 1024 /* Generic EPs max packet size */ 217 #define AST_VHUB_DESCS_COUNT 256 /* Use 256 descriptor mode (valid 218 * values are 256 and 32) 219 */ 220 221 struct ast_vhub; 222 struct ast_vhub_dev; 223 224 /* 225 * DMA descriptor (generic EPs only, currently only used 226 * for IN endpoints 227 */ 228 struct ast_vhub_desc { 229 __le32 w0; 230 __le32 w1; 231 }; 232 233 /* A transfer request, either core-originated or internal */ 234 struct ast_vhub_req { 235 struct usb_request req; 236 struct list_head queue; 237 238 /* Actual count written to descriptors (desc mode only) */ 239 unsigned int act_count; 240 241 /* 242 * Desc number of the final packet or -1. For non-desc 243 * mode (or ep0), any >= 0 value means "last packet" 244 */ 245 int last_desc; 246 247 /* Request active (pending DMAs) */ 248 bool active : 1; 249 250 /* Internal request (don't call back core) */ 251 bool internal : 1; 252 }; 253 #define to_ast_req(__ureq) container_of(__ureq, struct ast_vhub_req, req) 254 255 /* Current state of an EP0 */ 256 enum ep0_state { 257 ep0_state_token, 258 ep0_state_data, 259 ep0_state_status, 260 ep0_state_stall, 261 }; 262 263 /* 264 * An endpoint, either generic, ep0, actual gadget EP 265 * or internal use vhub EP0. vhub EP1 doesn't have an 266 * associated structure as it's mostly HW managed. 267 */ 268 struct ast_vhub_ep { 269 struct usb_ep ep; 270 271 /* Request queue */ 272 struct list_head queue; 273 274 /* EP index in the device, 0 means this is an EP0 */ 275 unsigned int d_idx; 276 277 /* Dev pointer or NULL for vHub EP0 */ 278 struct ast_vhub_dev *dev; 279 280 /* vHub itself */ 281 struct ast_vhub *vhub; 282 283 /* 284 * DMA buffer for EP0, fallback DMA buffer for misaligned 285 * OUT transfers for generic EPs 286 */ 287 void *buf; 288 dma_addr_t buf_dma; 289 290 /* The rest depends on the EP type */ 291 union { 292 /* EP0 (either device or vhub) */ 293 struct { 294 /* 295 * EP0 registers are "similar" for 296 * vHub and devices but located in 297 * different places. 298 */ 299 void __iomem *ctlstat; 300 void __iomem *setup; 301 302 /* Current state & direction */ 303 enum ep0_state state; 304 bool dir_in; 305 306 /* Internal use request */ 307 struct ast_vhub_req req; 308 } ep0; 309 310 /* Generic endpoint (aka EPn) */ 311 struct { 312 /* Registers */ 313 void __iomem *regs; 314 315 /* Index in global pool (zero-based) */ 316 unsigned int g_idx; 317 318 /* DMA Descriptors */ 319 struct ast_vhub_desc *descs; 320 dma_addr_t descs_dma; 321 unsigned int d_next; 322 unsigned int d_last; 323 unsigned int dma_conf; 324 325 /* Max chunk size for IN EPs */ 326 unsigned int chunk_max; 327 328 /* State flags */ 329 bool is_in : 1; 330 bool is_iso : 1; 331 bool stalled : 1; 332 bool wedged : 1; 333 bool enabled : 1; 334 bool desc_mode : 1; 335 } epn; 336 }; 337 }; 338 #define to_ast_ep(__uep) container_of(__uep, struct ast_vhub_ep, ep) 339 340 /* A device attached to a vHub port */ 341 struct ast_vhub_dev { 342 struct ast_vhub *vhub; 343 void __iomem *regs; 344 345 /* Device index (zero-based) and name string */ 346 unsigned int index; 347 const char *name; 348 349 /* sysfs enclosure for the gadget gunk */ 350 struct device *port_dev; 351 352 /* Link to gadget core */ 353 struct usb_gadget gadget; 354 struct usb_gadget_driver *driver; 355 bool registered : 1; 356 bool wakeup_en : 1; 357 bool enabled : 1; 358 359 /* Endpoint structures */ 360 struct ast_vhub_ep ep0; 361 struct ast_vhub_ep **epns; 362 u32 max_epns; 363 364 }; 365 #define to_ast_dev(__g) container_of(__g, struct ast_vhub_dev, gadget) 366 367 /* Per vhub port stateinfo structure */ 368 struct ast_vhub_port { 369 /* Port status & status change registers */ 370 u16 status; 371 u16 change; 372 373 /* Associated device slot */ 374 struct ast_vhub_dev dev; 375 }; 376 377 struct ast_vhub_full_cdesc { 378 struct usb_config_descriptor cfg; 379 struct usb_interface_descriptor intf; 380 struct usb_endpoint_descriptor ep; 381 } __packed; 382 383 /* Global vhub structure */ 384 struct ast_vhub { 385 struct platform_device *pdev; 386 void __iomem *regs; 387 int irq; 388 spinlock_t lock; 389 struct work_struct wake_work; 390 struct clk *clk; 391 392 /* EP0 DMA buffers allocated in one chunk */ 393 void *ep0_bufs; 394 dma_addr_t ep0_bufs_dma; 395 396 /* EP0 of the vhub itself */ 397 struct ast_vhub_ep ep0; 398 399 /* State of vhub ep1 */ 400 bool ep1_stalled : 1; 401 402 /* Per-port info */ 403 struct ast_vhub_port *ports; 404 u32 max_ports; 405 406 /* Generic EP data structures */ 407 struct ast_vhub_ep *epns; 408 u32 max_epns; 409 410 /* Upstream bus is suspended ? */ 411 bool suspended : 1; 412 413 /* Hub itself can signal remote wakeup */ 414 bool wakeup_en : 1; 415 416 /* Force full speed only */ 417 bool force_usb1 : 1; 418 419 /* Upstream bus speed captured at bus reset */ 420 unsigned int speed; 421 422 /* Standard USB Descriptors of the vhub. */ 423 struct usb_device_descriptor vhub_dev_desc; 424 struct ast_vhub_full_cdesc vhub_conf_desc; 425 struct usb_hub_descriptor vhub_hub_desc; 426 struct usb_gadget_strings vhub_str_desc; 427 }; 428 429 /* Standard request handlers result codes */ 430 enum std_req_rc { 431 std_req_stall = -1, /* Stall requested */ 432 std_req_complete = 0, /* Request completed with no data */ 433 std_req_data = 1, /* Request completed with data */ 434 std_req_driver = 2, /* Pass to driver pls */ 435 }; 436 437 #ifdef CONFIG_USB_GADGET_VERBOSE 438 #define UDCVDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) 439 440 #define EPVDBG(ep, fmt, ...) do { \ 441 dev_dbg(&(ep)->vhub->pdev->dev, \ 442 "%s:EP%d " fmt, \ 443 (ep)->dev ? (ep)->dev->name : "hub", \ 444 (ep)->d_idx, ##__VA_ARGS__); \ 445 } while(0) 446 447 #define DVDBG(d, fmt, ...) do { \ 448 dev_dbg(&(d)->vhub->pdev->dev, \ 449 "%s " fmt, (d)->name, \ 450 ##__VA_ARGS__); \ 451 } while(0) 452 453 #else 454 #define UDCVDBG(u, fmt...) do { } while(0) 455 #define EPVDBG(ep, fmt, ...) do { } while(0) 456 #define DVDBG(d, fmt, ...) do { } while(0) 457 #endif 458 459 #ifdef CONFIG_USB_GADGET_DEBUG 460 #define UDCDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) 461 462 #define EPDBG(ep, fmt, ...) do { \ 463 dev_dbg(&(ep)->vhub->pdev->dev, \ 464 "%s:EP%d " fmt, \ 465 (ep)->dev ? (ep)->dev->name : "hub", \ 466 (ep)->d_idx, ##__VA_ARGS__); \ 467 } while(0) 468 469 #define DDBG(d, fmt, ...) do { \ 470 dev_dbg(&(d)->vhub->pdev->dev, \ 471 "%s " fmt, (d)->name, \ 472 ##__VA_ARGS__); \ 473 } while(0) 474 #else 475 #define UDCDBG(u, fmt...) do { } while(0) 476 #define EPDBG(ep, fmt, ...) do { } while(0) 477 #define DDBG(d, fmt, ...) do { } while(0) 478 #endif 479 480 static inline void vhub_dma_workaround(void *addr) 481 { 482 /* 483 * This works around a confirmed HW issue with the Aspeed chip. 484 * 485 * The core uses a different bus to memory than the AHB going to 486 * the USB device controller. Due to the latter having a higher 487 * priority than the core for arbitration on that bus, it's 488 * possible for an MMIO to the device, followed by a DMA by the 489 * device from memory to all be performed and services before 490 * a previous store to memory gets completed. 491 * 492 * This the following scenario can happen: 493 * 494 * - Driver writes to a DMA descriptor (Mbus) 495 * - Driver writes to the MMIO register to start the DMA (AHB) 496 * - The gadget sees the second write and sends a read of the 497 * descriptor to the memory controller (Mbus) 498 * - The gadget hits memory before the descriptor write 499 * causing it to read an obsolete value. 500 * 501 * Thankfully the problem is limited to the USB gadget device, other 502 * masters in the SoC all have a lower priority than the core, thus 503 * ensuring that the store by the core arrives first. 504 * 505 * The workaround consists of using a dummy read of the memory before 506 * doing the MMIO writes. This will ensure that the previous writes 507 * have been "pushed out". 508 */ 509 mb(); 510 (void)__raw_readl((void __iomem *)addr); 511 } 512 513 /* core.c */ 514 void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, 515 int status); 516 void ast_vhub_nuke(struct ast_vhub_ep *ep, int status); 517 struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, 518 gfp_t gfp_flags); 519 void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req); 520 void ast_vhub_init_hw(struct ast_vhub *vhub); 521 522 /* ep0.c */ 523 void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack); 524 void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep); 525 void ast_vhub_reset_ep0(struct ast_vhub_dev *dev); 526 void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, 527 struct ast_vhub_dev *dev); 528 int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len); 529 int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...); 530 #define ast_vhub_simple_reply(udc, ...) \ 531 __ast_vhub_simple_reply((udc), \ 532 sizeof((u8[]) { __VA_ARGS__ })/sizeof(u8), \ 533 __VA_ARGS__) 534 535 /* hub.c */ 536 void ast_vhub_init_hub(struct ast_vhub *vhub); 537 enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, 538 struct usb_ctrlrequest *crq); 539 enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, 540 struct usb_ctrlrequest *crq); 541 void ast_vhub_device_connect(struct ast_vhub *vhub, unsigned int port, 542 bool on); 543 void ast_vhub_hub_suspend(struct ast_vhub *vhub); 544 void ast_vhub_hub_resume(struct ast_vhub *vhub); 545 void ast_vhub_hub_reset(struct ast_vhub *vhub); 546 void ast_vhub_hub_wake_all(struct ast_vhub *vhub); 547 548 /* dev.c */ 549 int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx); 550 void ast_vhub_del_dev(struct ast_vhub_dev *d); 551 void ast_vhub_dev_irq(struct ast_vhub_dev *d); 552 int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, 553 struct usb_ctrlrequest *crq); 554 555 /* epn.c */ 556 void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep); 557 void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep); 558 struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr); 559 void ast_vhub_dev_suspend(struct ast_vhub_dev *d); 560 void ast_vhub_dev_resume(struct ast_vhub_dev *d); 561 void ast_vhub_dev_reset(struct ast_vhub_dev *d); 562 563 #endif /* __ASPEED_VHUB_H */ 564