1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * zero.c -- Gadget Zero, for USB development 4 * 5 * Copyright (C) 2003-2008 David Brownell 6 * Copyright (C) 2008 by Nokia Corporation 7 */ 8 9 /* 10 * Gadget Zero only needs two bulk endpoints, and is an example of how you 11 * can write a hardware-agnostic gadget driver running inside a USB device. 12 * Some hardware details are visible, but don't affect most of the driver. 13 * 14 * Use it with the Linux host side "usbtest" driver to get a basic functional 15 * test of your device-side usb stack, or with "usb-skeleton". 16 * 17 * It supports two similar configurations. One sinks whatever the usb host 18 * writes, and in return sources zeroes. The other loops whatever the host 19 * writes back, so the host can read it. 20 * 21 * Many drivers will only have one configuration, letting them be much 22 * simpler if they also don't support high speed operation (like this 23 * driver does). 24 * 25 * Why is *this* driver using two configurations, rather than setting up 26 * two interfaces with different functions? To help verify that multiple 27 * configuration infrastructure is working correctly; also, so that it can 28 * work with low capability USB controllers without four bulk endpoints. 29 */ 30 31 /* 32 * driver assumes self-powered hardware, and 33 * has no way for users to trigger remote wakeup. 34 */ 35 36 /* #define VERBOSE_DEBUG */ 37 38 #include <linux/kernel.h> 39 #include <linux/slab.h> 40 #include <linux/device.h> 41 #include <linux/module.h> 42 #include <linux/err.h> 43 #include <linux/usb/composite.h> 44 45 #include "g_zero.h" 46 /*-------------------------------------------------------------------------*/ 47 USB_GADGET_COMPOSITE_OPTIONS(); 48 49 #define DRIVER_VERSION "Cinco de Mayo 2008" 50 51 static const char longname[] = "Gadget Zero"; 52 53 /* 54 * Normally the "loopback" configuration is second (index 1) so 55 * it's not the default. Here's where to change that order, to 56 * work better with hosts where config changes are problematic or 57 * controllers (like original superh) that only support one config. 58 */ 59 static bool loopdefault = 0; 60 module_param(loopdefault, bool, S_IRUGO|S_IWUSR); 61 62 static struct usb_zero_options gzero_options = { 63 .isoc_interval = GZERO_ISOC_INTERVAL, 64 .isoc_maxpacket = GZERO_ISOC_MAXPACKET, 65 .bulk_buflen = GZERO_BULK_BUFLEN, 66 .qlen = GZERO_QLEN, 67 .ss_bulk_qlen = GZERO_SS_BULK_QLEN, 68 .ss_iso_qlen = GZERO_SS_ISO_QLEN, 69 }; 70 71 /*-------------------------------------------------------------------------*/ 72 73 /* Thanks to NetChip Technologies for donating this product ID. 74 * 75 * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! 76 * Instead: allocate your own, using normal USB-IF procedures. 77 */ 78 #ifndef CONFIG_USB_ZERO_HNPTEST 79 #define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ 80 #define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ 81 #define DEFAULT_AUTORESUME 0 82 #else 83 #define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ 84 #define DRIVER_PRODUCT_NUM 0xbadd 85 #define DEFAULT_AUTORESUME 5 86 #endif 87 88 /* If the optional "autoresume" mode is enabled, it provides good 89 * functional coverage for the "USBCV" test harness from USB-IF. 90 * It's always set if OTG mode is enabled. 91 */ 92 static unsigned autoresume = DEFAULT_AUTORESUME; 93 module_param(autoresume, uint, S_IRUGO); 94 MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); 95 96 /* Maximum Autoresume time */ 97 static unsigned max_autoresume; 98 module_param(max_autoresume, uint, S_IRUGO); 99 MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup"); 100 101 /* Interval between two remote wakeups */ 102 static unsigned autoresume_interval_ms; 103 module_param(autoresume_interval_ms, uint, S_IRUGO); 104 MODULE_PARM_DESC(autoresume_interval_ms, 105 "milliseconds to increase successive wakeup delays"); 106 107 static unsigned autoresume_step_ms; 108 /*-------------------------------------------------------------------------*/ 109 110 static struct usb_device_descriptor device_desc = { 111 .bLength = sizeof device_desc, 112 .bDescriptorType = USB_DT_DEVICE, 113 114 /* .bcdUSB = DYNAMIC */ 115 .bDeviceClass = USB_CLASS_VENDOR_SPEC, 116 117 .idVendor = cpu_to_le16(DRIVER_VENDOR_NUM), 118 .idProduct = cpu_to_le16(DRIVER_PRODUCT_NUM), 119 .bNumConfigurations = 2, 120 }; 121 122 static const struct usb_descriptor_header *otg_desc[2]; 123 124 /* string IDs are assigned dynamically */ 125 /* default serial number takes at least two packets */ 126 static char serial[] = "0123456789.0123456789.0123456789"; 127 128 #define USB_GZERO_SS_DESC (USB_GADGET_FIRST_AVAIL_IDX + 0) 129 #define USB_GZERO_LB_DESC (USB_GADGET_FIRST_AVAIL_IDX + 1) 130 131 static struct usb_string strings_dev[] = { 132 [USB_GADGET_MANUFACTURER_IDX].s = "", 133 [USB_GADGET_PRODUCT_IDX].s = longname, 134 [USB_GADGET_SERIAL_IDX].s = serial, 135 [USB_GZERO_SS_DESC].s = "source and sink data", 136 [USB_GZERO_LB_DESC].s = "loop input to output", 137 { } /* end of list */ 138 }; 139 140 static struct usb_gadget_strings stringtab_dev = { 141 .language = 0x0409, /* en-us */ 142 .strings = strings_dev, 143 }; 144 145 static struct usb_gadget_strings *dev_strings[] = { 146 &stringtab_dev, 147 NULL, 148 }; 149 150 /*-------------------------------------------------------------------------*/ 151 152 static struct timer_list autoresume_timer; 153 static struct usb_composite_dev *autoresume_cdev; 154 155 static void zero_autoresume(struct timer_list *unused) 156 { 157 struct usb_composite_dev *cdev = autoresume_cdev; 158 struct usb_gadget *g = cdev->gadget; 159 160 /* unconfigured devices can't issue wakeups */ 161 if (!cdev->config) 162 return; 163 164 /* Normally the host would be woken up for something 165 * more significant than just a timer firing; likely 166 * because of some direct user request. 167 */ 168 if (g->speed != USB_SPEED_UNKNOWN) { 169 int status = usb_gadget_wakeup(g); 170 INFO(cdev, "%s --> %d\n", __func__, status); 171 } 172 } 173 174 static void zero_suspend(struct usb_composite_dev *cdev) 175 { 176 if (cdev->gadget->speed == USB_SPEED_UNKNOWN) 177 return; 178 179 if (autoresume) { 180 if (max_autoresume && 181 (autoresume_step_ms > max_autoresume * 1000)) 182 autoresume_step_ms = autoresume * 1000; 183 184 mod_timer(&autoresume_timer, jiffies + 185 msecs_to_jiffies(autoresume_step_ms)); 186 DBG(cdev, "suspend, wakeup in %d milliseconds\n", 187 autoresume_step_ms); 188 189 autoresume_step_ms += autoresume_interval_ms; 190 } else 191 DBG(cdev, "%s\n", __func__); 192 } 193 194 static void zero_resume(struct usb_composite_dev *cdev) 195 { 196 DBG(cdev, "%s\n", __func__); 197 del_timer(&autoresume_timer); 198 } 199 200 /*-------------------------------------------------------------------------*/ 201 202 static struct usb_configuration loopback_driver = { 203 .label = "loopback", 204 .bConfigurationValue = 2, 205 .bmAttributes = USB_CONFIG_ATT_SELFPOWER, 206 /* .iConfiguration = DYNAMIC */ 207 }; 208 209 static struct usb_function *func_ss; 210 static struct usb_function_instance *func_inst_ss; 211 212 static int ss_config_setup(struct usb_configuration *c, 213 const struct usb_ctrlrequest *ctrl) 214 { 215 switch (ctrl->bRequest) { 216 case 0x5b: 217 case 0x5c: 218 return func_ss->setup(func_ss, ctrl); 219 default: 220 return -EOPNOTSUPP; 221 } 222 } 223 224 static struct usb_configuration sourcesink_driver = { 225 .label = "source/sink", 226 .setup = ss_config_setup, 227 .bConfigurationValue = 3, 228 .bmAttributes = USB_CONFIG_ATT_SELFPOWER, 229 /* .iConfiguration = DYNAMIC */ 230 }; 231 232 module_param_named(buflen, gzero_options.bulk_buflen, uint, 0); 233 module_param_named(pattern, gzero_options.pattern, uint, S_IRUGO|S_IWUSR); 234 MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none"); 235 236 module_param_named(isoc_interval, gzero_options.isoc_interval, uint, 237 S_IRUGO|S_IWUSR); 238 MODULE_PARM_DESC(isoc_interval, "1 - 16"); 239 240 module_param_named(isoc_maxpacket, gzero_options.isoc_maxpacket, uint, 241 S_IRUGO|S_IWUSR); 242 MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); 243 244 module_param_named(isoc_mult, gzero_options.isoc_mult, uint, S_IRUGO|S_IWUSR); 245 MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)"); 246 247 module_param_named(isoc_maxburst, gzero_options.isoc_maxburst, uint, 248 S_IRUGO|S_IWUSR); 249 MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)"); 250 251 static struct usb_function *func_lb; 252 static struct usb_function_instance *func_inst_lb; 253 254 module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR); 255 MODULE_PARM_DESC(qlen, "depth of loopback queue"); 256 257 module_param_named(ss_bulk_qlen, gzero_options.ss_bulk_qlen, uint, 258 S_IRUGO|S_IWUSR); 259 MODULE_PARM_DESC(bulk_qlen, "depth of sourcesink queue for bulk transfer"); 260 261 module_param_named(ss_iso_qlen, gzero_options.ss_iso_qlen, uint, 262 S_IRUGO|S_IWUSR); 263 MODULE_PARM_DESC(iso_qlen, "depth of sourcesink queue for iso transfer"); 264 265 static int zero_bind(struct usb_composite_dev *cdev) 266 { 267 struct f_ss_opts *ss_opts; 268 struct f_lb_opts *lb_opts; 269 int status; 270 271 /* Allocate string descriptor numbers ... note that string 272 * contents can be overridden by the composite_dev glue. 273 */ 274 status = usb_string_ids_tab(cdev, strings_dev); 275 if (status < 0) 276 return status; 277 278 device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; 279 device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; 280 device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id; 281 282 autoresume_cdev = cdev; 283 timer_setup(&autoresume_timer, zero_autoresume, 0); 284 285 func_inst_ss = usb_get_function_instance("SourceSink"); 286 if (IS_ERR(func_inst_ss)) 287 return PTR_ERR(func_inst_ss); 288 289 ss_opts = container_of(func_inst_ss, struct f_ss_opts, func_inst); 290 ss_opts->pattern = gzero_options.pattern; 291 ss_opts->isoc_interval = gzero_options.isoc_interval; 292 ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket; 293 ss_opts->isoc_mult = gzero_options.isoc_mult; 294 ss_opts->isoc_maxburst = gzero_options.isoc_maxburst; 295 ss_opts->bulk_buflen = gzero_options.bulk_buflen; 296 ss_opts->bulk_qlen = gzero_options.ss_bulk_qlen; 297 ss_opts->iso_qlen = gzero_options.ss_iso_qlen; 298 299 func_ss = usb_get_function(func_inst_ss); 300 if (IS_ERR(func_ss)) { 301 status = PTR_ERR(func_ss); 302 goto err_put_func_inst_ss; 303 } 304 305 func_inst_lb = usb_get_function_instance("Loopback"); 306 if (IS_ERR(func_inst_lb)) { 307 status = PTR_ERR(func_inst_lb); 308 goto err_put_func_ss; 309 } 310 311 lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst); 312 lb_opts->bulk_buflen = gzero_options.bulk_buflen; 313 lb_opts->qlen = gzero_options.qlen; 314 315 func_lb = usb_get_function(func_inst_lb); 316 if (IS_ERR(func_lb)) { 317 status = PTR_ERR(func_lb); 318 goto err_put_func_inst_lb; 319 } 320 321 sourcesink_driver.iConfiguration = strings_dev[USB_GZERO_SS_DESC].id; 322 loopback_driver.iConfiguration = strings_dev[USB_GZERO_LB_DESC].id; 323 324 /* support autoresume for remote wakeup testing */ 325 sourcesink_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP; 326 loopback_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP; 327 sourcesink_driver.descriptors = NULL; 328 loopback_driver.descriptors = NULL; 329 if (autoresume) { 330 sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; 331 loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; 332 autoresume_step_ms = autoresume * 1000; 333 } 334 335 /* support OTG systems */ 336 if (gadget_is_otg(cdev->gadget)) { 337 if (!otg_desc[0]) { 338 struct usb_descriptor_header *usb_desc; 339 340 usb_desc = usb_otg_descriptor_alloc(cdev->gadget); 341 if (!usb_desc) { 342 status = -ENOMEM; 343 goto err_conf_flb; 344 } 345 usb_otg_descriptor_init(cdev->gadget, usb_desc); 346 otg_desc[0] = usb_desc; 347 otg_desc[1] = NULL; 348 } 349 sourcesink_driver.descriptors = otg_desc; 350 sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; 351 loopback_driver.descriptors = otg_desc; 352 loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; 353 } 354 355 /* Register primary, then secondary configuration. Note that 356 * SH3 only allows one config... 357 */ 358 if (loopdefault) { 359 usb_add_config_only(cdev, &loopback_driver); 360 usb_add_config_only(cdev, &sourcesink_driver); 361 } else { 362 usb_add_config_only(cdev, &sourcesink_driver); 363 usb_add_config_only(cdev, &loopback_driver); 364 } 365 status = usb_add_function(&sourcesink_driver, func_ss); 366 if (status) 367 goto err_free_otg_desc; 368 369 usb_ep_autoconfig_reset(cdev->gadget); 370 status = usb_add_function(&loopback_driver, func_lb); 371 if (status) 372 goto err_free_otg_desc; 373 374 usb_ep_autoconfig_reset(cdev->gadget); 375 usb_composite_overwrite_options(cdev, &coverwrite); 376 377 INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname); 378 379 return 0; 380 381 err_free_otg_desc: 382 kfree(otg_desc[0]); 383 otg_desc[0] = NULL; 384 err_conf_flb: 385 usb_put_function(func_lb); 386 func_lb = NULL; 387 err_put_func_inst_lb: 388 usb_put_function_instance(func_inst_lb); 389 func_inst_lb = NULL; 390 err_put_func_ss: 391 usb_put_function(func_ss); 392 func_ss = NULL; 393 err_put_func_inst_ss: 394 usb_put_function_instance(func_inst_ss); 395 func_inst_ss = NULL; 396 return status; 397 } 398 399 static int zero_unbind(struct usb_composite_dev *cdev) 400 { 401 del_timer_sync(&autoresume_timer); 402 if (!IS_ERR_OR_NULL(func_ss)) 403 usb_put_function(func_ss); 404 usb_put_function_instance(func_inst_ss); 405 if (!IS_ERR_OR_NULL(func_lb)) 406 usb_put_function(func_lb); 407 usb_put_function_instance(func_inst_lb); 408 kfree(otg_desc[0]); 409 otg_desc[0] = NULL; 410 411 return 0; 412 } 413 414 static struct usb_composite_driver zero_driver = { 415 .name = "zero", 416 .dev = &device_desc, 417 .strings = dev_strings, 418 .max_speed = USB_SPEED_SUPER, 419 .bind = zero_bind, 420 .unbind = zero_unbind, 421 .suspend = zero_suspend, 422 .resume = zero_resume, 423 }; 424 425 module_usb_composite_driver(zero_driver); 426 427 MODULE_AUTHOR("David Brownell"); 428 MODULE_LICENSE("GPL"); 429