1 /* 2 * f_acm.c -- USB CDC serial (ACM) function driver 3 * 4 * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) 5 * Copyright (C) 2008 by David Brownell 6 * Copyright (C) 2008 by Nokia Corporation 7 * Copyright (C) 2009 by Samsung Electronics 8 * Author: Michal Nazarewicz (mina86@mina86.com) 9 * 10 * This software is distributed under the terms of the GNU General 11 * Public License ("GPL") as published by the Free Software Foundation, 12 * either version 2 of that License or (at your option) any later version. 13 */ 14 15 /* #define VERBOSE_DEBUG */ 16 17 #include <linux/slab.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/device.h> 21 #include <linux/err.h> 22 23 #include "u_serial.h" 24 25 26 /* 27 * This CDC ACM function support just wraps control functions and 28 * notifications around the generic serial-over-usb code. 29 * 30 * Because CDC ACM is standardized by the USB-IF, many host operating 31 * systems have drivers for it. Accordingly, ACM is the preferred 32 * interop solution for serial-port type connections. The control 33 * models are often not necessary, and in any case don't do much in 34 * this bare-bones implementation. 35 * 36 * Note that even MS-Windows has some support for ACM. However, that 37 * support is somewhat broken because when you use ACM in a composite 38 * device, having multiple interfaces confuses the poor OS. It doesn't 39 * seem to understand CDC Union descriptors. The new "association" 40 * descriptors (roughly equivalent to CDC Unions) may sometimes help. 41 */ 42 43 struct f_acm { 44 struct gserial port; 45 u8 ctrl_id, data_id; 46 u8 port_num; 47 48 u8 pending; 49 50 /* lock is mostly for pending and notify_req ... they get accessed 51 * by callbacks both from tty (open/close/break) under its spinlock, 52 * and notify_req.complete() which can't use that lock. 53 */ 54 spinlock_t lock; 55 56 struct usb_ep *notify; 57 struct usb_request *notify_req; 58 59 struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ 60 61 /* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */ 62 u16 port_handshake_bits; 63 #define ACM_CTRL_RTS (1 << 1) /* unused with full duplex */ 64 #define ACM_CTRL_DTR (1 << 0) /* host is ready for data r/w */ 65 66 /* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */ 67 u16 serial_state; 68 #define ACM_CTRL_OVERRUN (1 << 6) 69 #define ACM_CTRL_PARITY (1 << 5) 70 #define ACM_CTRL_FRAMING (1 << 4) 71 #define ACM_CTRL_RI (1 << 3) 72 #define ACM_CTRL_BRK (1 << 2) 73 #define ACM_CTRL_DSR (1 << 1) 74 #define ACM_CTRL_DCD (1 << 0) 75 }; 76 77 static inline struct f_acm *func_to_acm(struct usb_function *f) 78 { 79 return container_of(f, struct f_acm, port.func); 80 } 81 82 static inline struct f_acm *port_to_acm(struct gserial *p) 83 { 84 return container_of(p, struct f_acm, port); 85 } 86 87 /*-------------------------------------------------------------------------*/ 88 89 /* notification endpoint uses smallish and infrequent fixed-size messages */ 90 91 #define GS_NOTIFY_INTERVAL_MS 32 92 #define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */ 93 94 /* interface and class descriptors: */ 95 96 static struct usb_interface_assoc_descriptor 97 acm_iad_descriptor = { 98 .bLength = sizeof acm_iad_descriptor, 99 .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, 100 101 /* .bFirstInterface = DYNAMIC, */ 102 .bInterfaceCount = 2, // control + data 103 .bFunctionClass = USB_CLASS_COMM, 104 .bFunctionSubClass = USB_CDC_SUBCLASS_ACM, 105 .bFunctionProtocol = USB_CDC_ACM_PROTO_AT_V25TER, 106 /* .iFunction = DYNAMIC */ 107 }; 108 109 110 static struct usb_interface_descriptor acm_control_interface_desc = { 111 .bLength = USB_DT_INTERFACE_SIZE, 112 .bDescriptorType = USB_DT_INTERFACE, 113 /* .bInterfaceNumber = DYNAMIC */ 114 .bNumEndpoints = 1, 115 .bInterfaceClass = USB_CLASS_COMM, 116 .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, 117 .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, 118 /* .iInterface = DYNAMIC */ 119 }; 120 121 static struct usb_interface_descriptor acm_data_interface_desc = { 122 .bLength = USB_DT_INTERFACE_SIZE, 123 .bDescriptorType = USB_DT_INTERFACE, 124 /* .bInterfaceNumber = DYNAMIC */ 125 .bNumEndpoints = 2, 126 .bInterfaceClass = USB_CLASS_CDC_DATA, 127 .bInterfaceSubClass = 0, 128 .bInterfaceProtocol = 0, 129 /* .iInterface = DYNAMIC */ 130 }; 131 132 static struct usb_cdc_header_desc acm_header_desc = { 133 .bLength = sizeof(acm_header_desc), 134 .bDescriptorType = USB_DT_CS_INTERFACE, 135 .bDescriptorSubType = USB_CDC_HEADER_TYPE, 136 .bcdCDC = cpu_to_le16(0x0110), 137 }; 138 139 static struct usb_cdc_call_mgmt_descriptor 140 acm_call_mgmt_descriptor = { 141 .bLength = sizeof(acm_call_mgmt_descriptor), 142 .bDescriptorType = USB_DT_CS_INTERFACE, 143 .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, 144 .bmCapabilities = 0, 145 /* .bDataInterface = DYNAMIC */ 146 }; 147 148 static struct usb_cdc_acm_descriptor acm_descriptor = { 149 .bLength = sizeof(acm_descriptor), 150 .bDescriptorType = USB_DT_CS_INTERFACE, 151 .bDescriptorSubType = USB_CDC_ACM_TYPE, 152 .bmCapabilities = USB_CDC_CAP_LINE, 153 }; 154 155 static struct usb_cdc_union_desc acm_union_desc = { 156 .bLength = sizeof(acm_union_desc), 157 .bDescriptorType = USB_DT_CS_INTERFACE, 158 .bDescriptorSubType = USB_CDC_UNION_TYPE, 159 /* .bMasterInterface0 = DYNAMIC */ 160 /* .bSlaveInterface0 = DYNAMIC */ 161 }; 162 163 /* full speed support: */ 164 165 static struct usb_endpoint_descriptor acm_fs_notify_desc = { 166 .bLength = USB_DT_ENDPOINT_SIZE, 167 .bDescriptorType = USB_DT_ENDPOINT, 168 .bEndpointAddress = USB_DIR_IN, 169 .bmAttributes = USB_ENDPOINT_XFER_INT, 170 .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), 171 .bInterval = GS_NOTIFY_INTERVAL_MS, 172 }; 173 174 static struct usb_endpoint_descriptor acm_fs_in_desc = { 175 .bLength = USB_DT_ENDPOINT_SIZE, 176 .bDescriptorType = USB_DT_ENDPOINT, 177 .bEndpointAddress = USB_DIR_IN, 178 .bmAttributes = USB_ENDPOINT_XFER_BULK, 179 }; 180 181 static struct usb_endpoint_descriptor acm_fs_out_desc = { 182 .bLength = USB_DT_ENDPOINT_SIZE, 183 .bDescriptorType = USB_DT_ENDPOINT, 184 .bEndpointAddress = USB_DIR_OUT, 185 .bmAttributes = USB_ENDPOINT_XFER_BULK, 186 }; 187 188 static struct usb_descriptor_header *acm_fs_function[] = { 189 (struct usb_descriptor_header *) &acm_iad_descriptor, 190 (struct usb_descriptor_header *) &acm_control_interface_desc, 191 (struct usb_descriptor_header *) &acm_header_desc, 192 (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, 193 (struct usb_descriptor_header *) &acm_descriptor, 194 (struct usb_descriptor_header *) &acm_union_desc, 195 (struct usb_descriptor_header *) &acm_fs_notify_desc, 196 (struct usb_descriptor_header *) &acm_data_interface_desc, 197 (struct usb_descriptor_header *) &acm_fs_in_desc, 198 (struct usb_descriptor_header *) &acm_fs_out_desc, 199 NULL, 200 }; 201 202 /* high speed support: */ 203 static struct usb_endpoint_descriptor acm_hs_notify_desc = { 204 .bLength = USB_DT_ENDPOINT_SIZE, 205 .bDescriptorType = USB_DT_ENDPOINT, 206 .bEndpointAddress = USB_DIR_IN, 207 .bmAttributes = USB_ENDPOINT_XFER_INT, 208 .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), 209 .bInterval = USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS), 210 }; 211 212 static struct usb_endpoint_descriptor acm_hs_in_desc = { 213 .bLength = USB_DT_ENDPOINT_SIZE, 214 .bDescriptorType = USB_DT_ENDPOINT, 215 .bmAttributes = USB_ENDPOINT_XFER_BULK, 216 .wMaxPacketSize = cpu_to_le16(512), 217 }; 218 219 static struct usb_endpoint_descriptor acm_hs_out_desc = { 220 .bLength = USB_DT_ENDPOINT_SIZE, 221 .bDescriptorType = USB_DT_ENDPOINT, 222 .bmAttributes = USB_ENDPOINT_XFER_BULK, 223 .wMaxPacketSize = cpu_to_le16(512), 224 }; 225 226 static struct usb_descriptor_header *acm_hs_function[] = { 227 (struct usb_descriptor_header *) &acm_iad_descriptor, 228 (struct usb_descriptor_header *) &acm_control_interface_desc, 229 (struct usb_descriptor_header *) &acm_header_desc, 230 (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, 231 (struct usb_descriptor_header *) &acm_descriptor, 232 (struct usb_descriptor_header *) &acm_union_desc, 233 (struct usb_descriptor_header *) &acm_hs_notify_desc, 234 (struct usb_descriptor_header *) &acm_data_interface_desc, 235 (struct usb_descriptor_header *) &acm_hs_in_desc, 236 (struct usb_descriptor_header *) &acm_hs_out_desc, 237 NULL, 238 }; 239 240 static struct usb_endpoint_descriptor acm_ss_in_desc = { 241 .bLength = USB_DT_ENDPOINT_SIZE, 242 .bDescriptorType = USB_DT_ENDPOINT, 243 .bmAttributes = USB_ENDPOINT_XFER_BULK, 244 .wMaxPacketSize = cpu_to_le16(1024), 245 }; 246 247 static struct usb_endpoint_descriptor acm_ss_out_desc = { 248 .bLength = USB_DT_ENDPOINT_SIZE, 249 .bDescriptorType = USB_DT_ENDPOINT, 250 .bmAttributes = USB_ENDPOINT_XFER_BULK, 251 .wMaxPacketSize = cpu_to_le16(1024), 252 }; 253 254 static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = { 255 .bLength = sizeof acm_ss_bulk_comp_desc, 256 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, 257 }; 258 259 static struct usb_descriptor_header *acm_ss_function[] = { 260 (struct usb_descriptor_header *) &acm_iad_descriptor, 261 (struct usb_descriptor_header *) &acm_control_interface_desc, 262 (struct usb_descriptor_header *) &acm_header_desc, 263 (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, 264 (struct usb_descriptor_header *) &acm_descriptor, 265 (struct usb_descriptor_header *) &acm_union_desc, 266 (struct usb_descriptor_header *) &acm_hs_notify_desc, 267 (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, 268 (struct usb_descriptor_header *) &acm_data_interface_desc, 269 (struct usb_descriptor_header *) &acm_ss_in_desc, 270 (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, 271 (struct usb_descriptor_header *) &acm_ss_out_desc, 272 (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, 273 NULL, 274 }; 275 276 /* string descriptors: */ 277 278 #define ACM_CTRL_IDX 0 279 #define ACM_DATA_IDX 1 280 #define ACM_IAD_IDX 2 281 282 /* static strings, in UTF-8 */ 283 static struct usb_string acm_string_defs[] = { 284 [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)", 285 [ACM_DATA_IDX].s = "CDC ACM Data", 286 [ACM_IAD_IDX ].s = "CDC Serial", 287 { } /* end of list */ 288 }; 289 290 static struct usb_gadget_strings acm_string_table = { 291 .language = 0x0409, /* en-us */ 292 .strings = acm_string_defs, 293 }; 294 295 static struct usb_gadget_strings *acm_strings[] = { 296 &acm_string_table, 297 NULL, 298 }; 299 300 /*-------------------------------------------------------------------------*/ 301 302 /* ACM control ... data handling is delegated to tty library code. 303 * The main task of this function is to activate and deactivate 304 * that code based on device state; track parameters like line 305 * speed, handshake state, and so on; and issue notifications. 306 */ 307 308 static void acm_complete_set_line_coding(struct usb_ep *ep, 309 struct usb_request *req) 310 { 311 struct f_acm *acm = ep->driver_data; 312 struct usb_composite_dev *cdev = acm->port.func.config->cdev; 313 314 if (req->status != 0) { 315 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n", 316 acm->port_num, req->status); 317 return; 318 } 319 320 /* normal completion */ 321 if (req->actual != sizeof(acm->port_line_coding)) { 322 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n", 323 acm->port_num, req->actual); 324 usb_ep_set_halt(ep); 325 } else { 326 struct usb_cdc_line_coding *value = req->buf; 327 328 /* REVISIT: we currently just remember this data. 329 * If we change that, (a) validate it first, then 330 * (b) update whatever hardware needs updating, 331 * (c) worry about locking. This is information on 332 * the order of 9600-8-N-1 ... most of which means 333 * nothing unless we control a real RS232 line. 334 */ 335 acm->port_line_coding = *value; 336 } 337 } 338 339 static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) 340 { 341 struct f_acm *acm = func_to_acm(f); 342 struct usb_composite_dev *cdev = f->config->cdev; 343 struct usb_request *req = cdev->req; 344 int value = -EOPNOTSUPP; 345 u16 w_index = le16_to_cpu(ctrl->wIndex); 346 u16 w_value = le16_to_cpu(ctrl->wValue); 347 u16 w_length = le16_to_cpu(ctrl->wLength); 348 349 /* composite driver infrastructure handles everything except 350 * CDC class messages; interface activation uses set_alt(). 351 * 352 * Note CDC spec table 4 lists the ACM request profile. It requires 353 * encapsulated command support ... we don't handle any, and respond 354 * to them by stalling. Options include get/set/clear comm features 355 * (not that useful) and SEND_BREAK. 356 */ 357 switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { 358 359 /* SET_LINE_CODING ... just read and save what the host sends */ 360 case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) 361 | USB_CDC_REQ_SET_LINE_CODING: 362 if (w_length != sizeof(struct usb_cdc_line_coding) 363 || w_index != acm->ctrl_id) 364 goto invalid; 365 366 value = w_length; 367 cdev->gadget->ep0->driver_data = acm; 368 req->complete = acm_complete_set_line_coding; 369 break; 370 371 /* GET_LINE_CODING ... return what host sent, or initial value */ 372 case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) 373 | USB_CDC_REQ_GET_LINE_CODING: 374 if (w_index != acm->ctrl_id) 375 goto invalid; 376 377 value = min_t(unsigned, w_length, 378 sizeof(struct usb_cdc_line_coding)); 379 memcpy(req->buf, &acm->port_line_coding, value); 380 break; 381 382 /* SET_CONTROL_LINE_STATE ... save what the host sent */ 383 case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) 384 | USB_CDC_REQ_SET_CONTROL_LINE_STATE: 385 if (w_index != acm->ctrl_id) 386 goto invalid; 387 388 value = 0; 389 390 /* FIXME we should not allow data to flow until the 391 * host sets the ACM_CTRL_DTR bit; and when it clears 392 * that bit, we should return to that no-flow state. 393 */ 394 acm->port_handshake_bits = w_value; 395 break; 396 397 default: 398 invalid: 399 dev_vdbg(&cdev->gadget->dev, 400 "invalid control req%02x.%02x v%04x i%04x l%d\n", 401 ctrl->bRequestType, ctrl->bRequest, 402 w_value, w_index, w_length); 403 } 404 405 /* respond with data transfer or status phase? */ 406 if (value >= 0) { 407 dev_dbg(&cdev->gadget->dev, 408 "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n", 409 acm->port_num, ctrl->bRequestType, ctrl->bRequest, 410 w_value, w_index, w_length); 411 req->zero = 0; 412 req->length = value; 413 value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); 414 if (value < 0) 415 ERROR(cdev, "acm response on ttyGS%d, err %d\n", 416 acm->port_num, value); 417 } 418 419 /* device either stalls (value < 0) or reports success */ 420 return value; 421 } 422 423 static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) 424 { 425 struct f_acm *acm = func_to_acm(f); 426 struct usb_composite_dev *cdev = f->config->cdev; 427 428 /* we know alt == 0, so this is an activation or a reset */ 429 430 if (intf == acm->ctrl_id) { 431 dev_vdbg(&cdev->gadget->dev, 432 "reset acm control interface %d\n", intf); 433 usb_ep_disable(acm->notify); 434 435 if (!acm->notify->desc) 436 if (config_ep_by_speed(cdev->gadget, f, acm->notify)) 437 return -EINVAL; 438 439 usb_ep_enable(acm->notify); 440 441 } else if (intf == acm->data_id) { 442 if (acm->notify->enabled) { 443 dev_dbg(&cdev->gadget->dev, 444 "reset acm ttyGS%d\n", acm->port_num); 445 gserial_disconnect(&acm->port); 446 } 447 if (!acm->port.in->desc || !acm->port.out->desc) { 448 dev_dbg(&cdev->gadget->dev, 449 "activate acm ttyGS%d\n", acm->port_num); 450 if (config_ep_by_speed(cdev->gadget, f, 451 acm->port.in) || 452 config_ep_by_speed(cdev->gadget, f, 453 acm->port.out)) { 454 acm->port.in->desc = NULL; 455 acm->port.out->desc = NULL; 456 return -EINVAL; 457 } 458 } 459 gserial_connect(&acm->port, acm->port_num); 460 461 } else 462 return -EINVAL; 463 464 return 0; 465 } 466 467 static void acm_disable(struct usb_function *f) 468 { 469 struct f_acm *acm = func_to_acm(f); 470 struct usb_composite_dev *cdev = f->config->cdev; 471 472 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num); 473 gserial_disconnect(&acm->port); 474 usb_ep_disable(acm->notify); 475 } 476 477 /*-------------------------------------------------------------------------*/ 478 479 /** 480 * acm_cdc_notify - issue CDC notification to host 481 * @acm: wraps host to be notified 482 * @type: notification type 483 * @value: Refer to cdc specs, wValue field. 484 * @data: data to be sent 485 * @length: size of data 486 * Context: irqs blocked, acm->lock held, acm_notify_req non-null 487 * 488 * Returns zero on success or a negative errno. 489 * 490 * See section 6.3.5 of the CDC 1.1 specification for information 491 * about the only notification we issue: SerialState change. 492 */ 493 static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, 494 void *data, unsigned length) 495 { 496 struct usb_ep *ep = acm->notify; 497 struct usb_request *req; 498 struct usb_cdc_notification *notify; 499 const unsigned len = sizeof(*notify) + length; 500 void *buf; 501 int status; 502 503 req = acm->notify_req; 504 acm->notify_req = NULL; 505 acm->pending = false; 506 507 req->length = len; 508 notify = req->buf; 509 buf = notify + 1; 510 511 notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS 512 | USB_RECIP_INTERFACE; 513 notify->bNotificationType = type; 514 notify->wValue = cpu_to_le16(value); 515 notify->wIndex = cpu_to_le16(acm->ctrl_id); 516 notify->wLength = cpu_to_le16(length); 517 memcpy(buf, data, length); 518 519 /* ep_queue() can complete immediately if it fills the fifo... */ 520 spin_unlock(&acm->lock); 521 status = usb_ep_queue(ep, req, GFP_ATOMIC); 522 spin_lock(&acm->lock); 523 524 if (status < 0) { 525 ERROR(acm->port.func.config->cdev, 526 "acm ttyGS%d can't notify serial state, %d\n", 527 acm->port_num, status); 528 acm->notify_req = req; 529 } 530 531 return status; 532 } 533 534 static int acm_notify_serial_state(struct f_acm *acm) 535 { 536 struct usb_composite_dev *cdev = acm->port.func.config->cdev; 537 int status; 538 __le16 serial_state; 539 540 spin_lock(&acm->lock); 541 if (acm->notify_req) { 542 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n", 543 acm->port_num, acm->serial_state); 544 serial_state = cpu_to_le16(acm->serial_state); 545 status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE, 546 0, &serial_state, sizeof(acm->serial_state)); 547 } else { 548 acm->pending = true; 549 status = 0; 550 } 551 spin_unlock(&acm->lock); 552 return status; 553 } 554 555 static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req) 556 { 557 struct f_acm *acm = req->context; 558 u8 doit = false; 559 560 /* on this call path we do NOT hold the port spinlock, 561 * which is why ACM needs its own spinlock 562 */ 563 spin_lock(&acm->lock); 564 if (req->status != -ESHUTDOWN) 565 doit = acm->pending; 566 acm->notify_req = req; 567 spin_unlock(&acm->lock); 568 569 if (doit) 570 acm_notify_serial_state(acm); 571 } 572 573 /* connect == the TTY link is open */ 574 575 static void acm_connect(struct gserial *port) 576 { 577 struct f_acm *acm = port_to_acm(port); 578 579 acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD; 580 acm_notify_serial_state(acm); 581 } 582 583 static void acm_disconnect(struct gserial *port) 584 { 585 struct f_acm *acm = port_to_acm(port); 586 587 acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD); 588 acm_notify_serial_state(acm); 589 } 590 591 static int acm_send_break(struct gserial *port, int duration) 592 { 593 struct f_acm *acm = port_to_acm(port); 594 u16 state; 595 596 state = acm->serial_state; 597 state &= ~ACM_CTRL_BRK; 598 if (duration) 599 state |= ACM_CTRL_BRK; 600 601 acm->serial_state = state; 602 return acm_notify_serial_state(acm); 603 } 604 605 /*-------------------------------------------------------------------------*/ 606 607 /* ACM function driver setup/binding */ 608 static int 609 acm_bind(struct usb_configuration *c, struct usb_function *f) 610 { 611 struct usb_composite_dev *cdev = c->cdev; 612 struct f_acm *acm = func_to_acm(f); 613 struct usb_string *us; 614 int status; 615 struct usb_ep *ep; 616 617 /* REVISIT might want instance-specific strings to help 618 * distinguish instances ... 619 */ 620 621 /* maybe allocate device-global string IDs, and patch descriptors */ 622 us = usb_gstrings_attach(cdev, acm_strings, 623 ARRAY_SIZE(acm_string_defs)); 624 if (IS_ERR(us)) 625 return PTR_ERR(us); 626 acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id; 627 acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id; 628 acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id; 629 630 /* allocate instance-specific interface IDs, and patch descriptors */ 631 status = usb_interface_id(c, f); 632 if (status < 0) 633 goto fail; 634 acm->ctrl_id = status; 635 acm_iad_descriptor.bFirstInterface = status; 636 637 acm_control_interface_desc.bInterfaceNumber = status; 638 acm_union_desc .bMasterInterface0 = status; 639 640 status = usb_interface_id(c, f); 641 if (status < 0) 642 goto fail; 643 acm->data_id = status; 644 645 acm_data_interface_desc.bInterfaceNumber = status; 646 acm_union_desc.bSlaveInterface0 = status; 647 acm_call_mgmt_descriptor.bDataInterface = status; 648 649 status = -ENODEV; 650 651 /* allocate instance-specific endpoints */ 652 ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc); 653 if (!ep) 654 goto fail; 655 acm->port.in = ep; 656 657 ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc); 658 if (!ep) 659 goto fail; 660 acm->port.out = ep; 661 662 ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc); 663 if (!ep) 664 goto fail; 665 acm->notify = ep; 666 667 /* allocate notification */ 668 acm->notify_req = gs_alloc_req(ep, 669 sizeof(struct usb_cdc_notification) + 2, 670 GFP_KERNEL); 671 if (!acm->notify_req) 672 goto fail; 673 674 acm->notify_req->complete = acm_cdc_notify_complete; 675 acm->notify_req->context = acm; 676 677 /* support all relevant hardware speeds... we expect that when 678 * hardware is dual speed, all bulk-capable endpoints work at 679 * both speeds 680 */ 681 acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress; 682 acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress; 683 acm_hs_notify_desc.bEndpointAddress = 684 acm_fs_notify_desc.bEndpointAddress; 685 686 acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress; 687 acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress; 688 689 status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function, 690 acm_ss_function, NULL); 691 if (status) 692 goto fail; 693 694 dev_dbg(&cdev->gadget->dev, 695 "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n", 696 acm->port_num, 697 gadget_is_superspeed(c->cdev->gadget) ? "super" : 698 gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", 699 acm->port.in->name, acm->port.out->name, 700 acm->notify->name); 701 return 0; 702 703 fail: 704 if (acm->notify_req) 705 gs_free_req(acm->notify, acm->notify_req); 706 707 ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status); 708 709 return status; 710 } 711 712 static void acm_unbind(struct usb_configuration *c, struct usb_function *f) 713 { 714 struct f_acm *acm = func_to_acm(f); 715 716 acm_string_defs[0].id = 0; 717 usb_free_all_descriptors(f); 718 if (acm->notify_req) 719 gs_free_req(acm->notify, acm->notify_req); 720 } 721 722 static void acm_free_func(struct usb_function *f) 723 { 724 struct f_acm *acm = func_to_acm(f); 725 726 kfree(acm); 727 } 728 729 static struct usb_function *acm_alloc_func(struct usb_function_instance *fi) 730 { 731 struct f_serial_opts *opts; 732 struct f_acm *acm; 733 734 acm = kzalloc(sizeof(*acm), GFP_KERNEL); 735 if (!acm) 736 return ERR_PTR(-ENOMEM); 737 738 spin_lock_init(&acm->lock); 739 740 acm->port.connect = acm_connect; 741 acm->port.disconnect = acm_disconnect; 742 acm->port.send_break = acm_send_break; 743 744 acm->port.func.name = "acm"; 745 acm->port.func.strings = acm_strings; 746 /* descriptors are per-instance copies */ 747 acm->port.func.bind = acm_bind; 748 acm->port.func.set_alt = acm_set_alt; 749 acm->port.func.setup = acm_setup; 750 acm->port.func.disable = acm_disable; 751 752 opts = container_of(fi, struct f_serial_opts, func_inst); 753 acm->port_num = opts->port_num; 754 acm->port.func.unbind = acm_unbind; 755 acm->port.func.free_func = acm_free_func; 756 757 return &acm->port.func; 758 } 759 760 static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item) 761 { 762 return container_of(to_config_group(item), struct f_serial_opts, 763 func_inst.group); 764 } 765 766 static void acm_attr_release(struct config_item *item) 767 { 768 struct f_serial_opts *opts = to_f_serial_opts(item); 769 770 usb_put_function_instance(&opts->func_inst); 771 } 772 773 static struct configfs_item_operations acm_item_ops = { 774 .release = acm_attr_release, 775 }; 776 777 static ssize_t f_acm_port_num_show(struct config_item *item, char *page) 778 { 779 return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num); 780 } 781 782 CONFIGFS_ATTR_RO(f_acm_, port_num); 783 784 static struct configfs_attribute *acm_attrs[] = { 785 &f_acm_attr_port_num, 786 NULL, 787 }; 788 789 static struct config_item_type acm_func_type = { 790 .ct_item_ops = &acm_item_ops, 791 .ct_attrs = acm_attrs, 792 .ct_owner = THIS_MODULE, 793 }; 794 795 static void acm_free_instance(struct usb_function_instance *fi) 796 { 797 struct f_serial_opts *opts; 798 799 opts = container_of(fi, struct f_serial_opts, func_inst); 800 gserial_free_line(opts->port_num); 801 kfree(opts); 802 } 803 804 static struct usb_function_instance *acm_alloc_instance(void) 805 { 806 struct f_serial_opts *opts; 807 int ret; 808 809 opts = kzalloc(sizeof(*opts), GFP_KERNEL); 810 if (!opts) 811 return ERR_PTR(-ENOMEM); 812 opts->func_inst.free_func_inst = acm_free_instance; 813 ret = gserial_alloc_line(&opts->port_num); 814 if (ret) { 815 kfree(opts); 816 return ERR_PTR(ret); 817 } 818 config_group_init_type_name(&opts->func_inst.group, "", 819 &acm_func_type); 820 return &opts->func_inst; 821 } 822 DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func); 823 MODULE_LICENSE("GPL"); 824