1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling 4 * 5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com 6 * 7 * Authors: Felipe Balbi <balbi@ti.com>, 8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/slab.h> 13 #include <linux/spinlock.h> 14 #include <linux/platform_device.h> 15 #include <linux/pm_runtime.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/list.h> 19 #include <linux/dma-mapping.h> 20 21 #include <linux/usb/ch9.h> 22 #include <linux/usb/gadget.h> 23 #include <linux/usb/composite.h> 24 25 #include "core.h" 26 #include "debug.h" 27 #include "gadget.h" 28 #include "io.h" 29 30 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep); 31 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, 32 struct dwc3_ep *dep, struct dwc3_request *req); 33 34 static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep, 35 dma_addr_t buf_dma, u32 len, u32 type, bool chain) 36 { 37 struct dwc3_trb *trb; 38 struct dwc3 *dwc; 39 40 dwc = dep->dwc; 41 trb = &dwc->ep0_trb[dep->trb_enqueue]; 42 43 if (chain) 44 dep->trb_enqueue++; 45 46 trb->bpl = lower_32_bits(buf_dma); 47 trb->bph = upper_32_bits(buf_dma); 48 trb->size = len; 49 trb->ctrl = type; 50 51 trb->ctrl |= (DWC3_TRB_CTRL_HWO 52 | DWC3_TRB_CTRL_ISP_IMI); 53 54 if (chain) 55 trb->ctrl |= DWC3_TRB_CTRL_CHN; 56 else 57 trb->ctrl |= (DWC3_TRB_CTRL_IOC 58 | DWC3_TRB_CTRL_LST); 59 60 trace_dwc3_prepare_trb(dep, trb); 61 } 62 63 static int dwc3_ep0_start_trans(struct dwc3_ep *dep) 64 { 65 struct dwc3_gadget_ep_cmd_params params; 66 struct dwc3 *dwc; 67 int ret; 68 69 if (dep->flags & DWC3_EP_TRANSFER_STARTED) 70 return 0; 71 72 dwc = dep->dwc; 73 74 memset(¶ms, 0, sizeof(params)); 75 params.param0 = upper_32_bits(dwc->ep0_trb_addr); 76 params.param1 = lower_32_bits(dwc->ep0_trb_addr); 77 78 ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms); 79 if (ret < 0) 80 return ret; 81 82 dwc->ep0_next_event = DWC3_EP0_COMPLETE; 83 84 return 0; 85 } 86 87 static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, 88 struct dwc3_request *req) 89 { 90 struct dwc3 *dwc = dep->dwc; 91 92 req->request.actual = 0; 93 req->request.status = -EINPROGRESS; 94 req->epnum = dep->number; 95 96 list_add_tail(&req->list, &dep->pending_list); 97 98 /* 99 * Gadget driver might not be quick enough to queue a request 100 * before we get a Transfer Not Ready event on this endpoint. 101 * 102 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that 103 * flag is set, it's telling us that as soon as Gadget queues the 104 * required request, we should kick the transfer here because the 105 * IRQ we were waiting for is long gone. 106 */ 107 if (dep->flags & DWC3_EP_PENDING_REQUEST) { 108 unsigned int direction; 109 110 direction = !!(dep->flags & DWC3_EP0_DIR_IN); 111 112 if (dwc->ep0state != EP0_DATA_PHASE) { 113 dev_WARN(dwc->dev, "Unexpected pending request\n"); 114 return 0; 115 } 116 117 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); 118 119 dep->flags &= ~(DWC3_EP_PENDING_REQUEST | 120 DWC3_EP0_DIR_IN); 121 122 return 0; 123 } 124 125 /* 126 * In case gadget driver asked us to delay the STATUS phase, 127 * handle it here. 128 */ 129 if (dwc->delayed_status) { 130 unsigned int direction; 131 132 direction = !dwc->ep0_expect_in; 133 dwc->delayed_status = false; 134 usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED); 135 136 if (dwc->ep0state == EP0_STATUS_PHASE) 137 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); 138 139 return 0; 140 } 141 142 /* 143 * Unfortunately we have uncovered a limitation wrt the Data Phase. 144 * 145 * Section 9.4 says we can wait for the XferNotReady(DATA) event to 146 * come before issueing Start Transfer command, but if we do, we will 147 * miss situations where the host starts another SETUP phase instead of 148 * the DATA phase. Such cases happen at least on TD.7.6 of the Link 149 * Layer Compliance Suite. 150 * 151 * The problem surfaces due to the fact that in case of back-to-back 152 * SETUP packets there will be no XferNotReady(DATA) generated and we 153 * will be stuck waiting for XferNotReady(DATA) forever. 154 * 155 * By looking at tables 9-13 and 9-14 of the Databook, we can see that 156 * it tells us to start Data Phase right away. It also mentions that if 157 * we receive a SETUP phase instead of the DATA phase, core will issue 158 * XferComplete for the DATA phase, before actually initiating it in 159 * the wire, with the TRB's status set to "SETUP_PENDING". Such status 160 * can only be used to print some debugging logs, as the core expects 161 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB, 162 * just so it completes right away, without transferring anything and, 163 * only then, we can go back to the SETUP phase. 164 * 165 * Because of this scenario, SNPS decided to change the programming 166 * model of control transfers and support on-demand transfers only for 167 * the STATUS phase. To fix the issue we have now, we will always wait 168 * for gadget driver to queue the DATA phase's struct usb_request, then 169 * start it right away. 170 * 171 * If we're actually in a 2-stage transfer, we will wait for 172 * XferNotReady(STATUS). 173 */ 174 if (dwc->three_stage_setup) { 175 unsigned int direction; 176 177 direction = dwc->ep0_expect_in; 178 dwc->ep0state = EP0_DATA_PHASE; 179 180 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); 181 182 dep->flags &= ~DWC3_EP0_DIR_IN; 183 } 184 185 return 0; 186 } 187 188 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, 189 gfp_t gfp_flags) 190 { 191 struct dwc3_request *req = to_dwc3_request(request); 192 struct dwc3_ep *dep = to_dwc3_ep(ep); 193 struct dwc3 *dwc = dep->dwc; 194 195 unsigned long flags; 196 197 int ret; 198 199 spin_lock_irqsave(&dwc->lock, flags); 200 if (!dep->endpoint.desc || !dwc->pullups_connected) { 201 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", 202 dep->name); 203 ret = -ESHUTDOWN; 204 goto out; 205 } 206 207 /* we share one TRB for ep0/1 */ 208 if (!list_empty(&dep->pending_list)) { 209 ret = -EBUSY; 210 goto out; 211 } 212 213 ret = __dwc3_gadget_ep0_queue(dep, req); 214 215 out: 216 spin_unlock_irqrestore(&dwc->lock, flags); 217 218 return ret; 219 } 220 221 void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) 222 { 223 struct dwc3_ep *dep; 224 225 /* reinitialize physical ep1 */ 226 dep = dwc->eps[1]; 227 dep->flags = DWC3_EP_ENABLED; 228 229 /* stall is always issued on EP0 */ 230 dep = dwc->eps[0]; 231 __dwc3_gadget_ep_set_halt(dep, 1, false); 232 dep->flags = DWC3_EP_ENABLED; 233 dwc->delayed_status = false; 234 235 if (!list_empty(&dep->pending_list)) { 236 struct dwc3_request *req; 237 238 req = next_request(&dep->pending_list); 239 dwc3_gadget_giveback(dep, req, -ECONNRESET); 240 } 241 242 dwc->ep0state = EP0_SETUP_PHASE; 243 dwc3_ep0_out_start(dwc); 244 } 245 246 int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value) 247 { 248 struct dwc3_ep *dep = to_dwc3_ep(ep); 249 struct dwc3 *dwc = dep->dwc; 250 251 dwc3_ep0_stall_and_restart(dwc); 252 253 return 0; 254 } 255 256 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value) 257 { 258 struct dwc3_ep *dep = to_dwc3_ep(ep); 259 struct dwc3 *dwc = dep->dwc; 260 unsigned long flags; 261 int ret; 262 263 spin_lock_irqsave(&dwc->lock, flags); 264 ret = __dwc3_gadget_ep0_set_halt(ep, value); 265 spin_unlock_irqrestore(&dwc->lock, flags); 266 267 return ret; 268 } 269 270 void dwc3_ep0_out_start(struct dwc3 *dwc) 271 { 272 struct dwc3_ep *dep; 273 int ret; 274 int i; 275 276 complete(&dwc->ep0_in_setup); 277 278 dep = dwc->eps[0]; 279 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8, 280 DWC3_TRBCTL_CONTROL_SETUP, false); 281 ret = dwc3_ep0_start_trans(dep); 282 WARN_ON(ret < 0); 283 for (i = 2; i < DWC3_ENDPOINTS_NUM; i++) { 284 struct dwc3_ep *dwc3_ep; 285 286 dwc3_ep = dwc->eps[i]; 287 if (!dwc3_ep) 288 continue; 289 290 if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP)) 291 continue; 292 293 dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP; 294 dwc3_stop_active_transfer(dwc3_ep, true, true); 295 } 296 } 297 298 static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le) 299 { 300 struct dwc3_ep *dep; 301 u32 windex = le16_to_cpu(wIndex_le); 302 u32 epnum; 303 304 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1; 305 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) 306 epnum |= 1; 307 308 dep = dwc->eps[epnum]; 309 if (dep == NULL) 310 return NULL; 311 312 if (dep->flags & DWC3_EP_ENABLED) 313 return dep; 314 315 return NULL; 316 } 317 318 static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req) 319 { 320 } 321 /* 322 * ch 9.4.5 323 */ 324 static int dwc3_ep0_handle_status(struct dwc3 *dwc, 325 struct usb_ctrlrequest *ctrl) 326 { 327 struct dwc3_ep *dep; 328 u32 recip; 329 u32 value; 330 u32 reg; 331 u16 usb_status = 0; 332 __le16 *response_pkt; 333 334 /* We don't support PTM_STATUS */ 335 value = le16_to_cpu(ctrl->wValue); 336 if (value != 0) 337 return -EINVAL; 338 339 recip = ctrl->bRequestType & USB_RECIP_MASK; 340 switch (recip) { 341 case USB_RECIP_DEVICE: 342 /* 343 * LTM will be set once we know how to set this in HW. 344 */ 345 usb_status |= dwc->gadget->is_selfpowered; 346 347 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) || 348 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) { 349 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 350 if (reg & DWC3_DCTL_INITU1ENA) 351 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED; 352 if (reg & DWC3_DCTL_INITU2ENA) 353 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED; 354 } 355 356 break; 357 358 case USB_RECIP_INTERFACE: 359 /* 360 * Function Remote Wake Capable D0 361 * Function Remote Wakeup D1 362 */ 363 break; 364 365 case USB_RECIP_ENDPOINT: 366 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); 367 if (!dep) 368 return -EINVAL; 369 370 if (dep->flags & DWC3_EP_STALL) 371 usb_status = 1 << USB_ENDPOINT_HALT; 372 break; 373 default: 374 return -EINVAL; 375 } 376 377 response_pkt = (__le16 *) dwc->setup_buf; 378 *response_pkt = cpu_to_le16(usb_status); 379 380 dep = dwc->eps[0]; 381 dwc->ep0_usb_req.dep = dep; 382 dwc->ep0_usb_req.request.length = sizeof(*response_pkt); 383 dwc->ep0_usb_req.request.buf = dwc->setup_buf; 384 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl; 385 386 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); 387 } 388 389 static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state, 390 int set) 391 { 392 u32 reg; 393 394 if (state != USB_STATE_CONFIGURED) 395 return -EINVAL; 396 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && 397 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) 398 return -EINVAL; 399 if (set && dwc->dis_u1_entry_quirk) 400 return -EINVAL; 401 402 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 403 if (set) 404 reg |= DWC3_DCTL_INITU1ENA; 405 else 406 reg &= ~DWC3_DCTL_INITU1ENA; 407 dwc3_writel(dwc->regs, DWC3_DCTL, reg); 408 409 return 0; 410 } 411 412 static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state, 413 int set) 414 { 415 u32 reg; 416 417 418 if (state != USB_STATE_CONFIGURED) 419 return -EINVAL; 420 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && 421 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) 422 return -EINVAL; 423 if (set && dwc->dis_u2_entry_quirk) 424 return -EINVAL; 425 426 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 427 if (set) 428 reg |= DWC3_DCTL_INITU2ENA; 429 else 430 reg &= ~DWC3_DCTL_INITU2ENA; 431 dwc3_writel(dwc->regs, DWC3_DCTL, reg); 432 433 return 0; 434 } 435 436 static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state, 437 u32 wIndex, int set) 438 { 439 if ((wIndex & 0xff) != 0) 440 return -EINVAL; 441 if (!set) 442 return -EINVAL; 443 444 switch (wIndex >> 8) { 445 case USB_TEST_J: 446 case USB_TEST_K: 447 case USB_TEST_SE0_NAK: 448 case USB_TEST_PACKET: 449 case USB_TEST_FORCE_ENABLE: 450 dwc->test_mode_nr = wIndex >> 8; 451 dwc->test_mode = true; 452 break; 453 default: 454 return -EINVAL; 455 } 456 457 return 0; 458 } 459 460 static int dwc3_ep0_handle_device(struct dwc3 *dwc, 461 struct usb_ctrlrequest *ctrl, int set) 462 { 463 enum usb_device_state state; 464 u32 wValue; 465 u32 wIndex; 466 int ret = 0; 467 468 wValue = le16_to_cpu(ctrl->wValue); 469 wIndex = le16_to_cpu(ctrl->wIndex); 470 state = dwc->gadget->state; 471 472 switch (wValue) { 473 case USB_DEVICE_REMOTE_WAKEUP: 474 break; 475 /* 476 * 9.4.1 says only only for SS, in AddressState only for 477 * default control pipe 478 */ 479 case USB_DEVICE_U1_ENABLE: 480 ret = dwc3_ep0_handle_u1(dwc, state, set); 481 break; 482 case USB_DEVICE_U2_ENABLE: 483 ret = dwc3_ep0_handle_u2(dwc, state, set); 484 break; 485 case USB_DEVICE_LTM_ENABLE: 486 ret = -EINVAL; 487 break; 488 case USB_DEVICE_TEST_MODE: 489 ret = dwc3_ep0_handle_test(dwc, state, wIndex, set); 490 break; 491 default: 492 ret = -EINVAL; 493 } 494 495 return ret; 496 } 497 498 static int dwc3_ep0_handle_intf(struct dwc3 *dwc, 499 struct usb_ctrlrequest *ctrl, int set) 500 { 501 u32 wValue; 502 int ret = 0; 503 504 wValue = le16_to_cpu(ctrl->wValue); 505 506 switch (wValue) { 507 case USB_INTRF_FUNC_SUSPEND: 508 /* 509 * REVISIT: Ideally we would enable some low power mode here, 510 * however it's unclear what we should be doing here. 511 * 512 * For now, we're not doing anything, just making sure we return 513 * 0 so USB Command Verifier tests pass without any errors. 514 */ 515 break; 516 default: 517 ret = -EINVAL; 518 } 519 520 return ret; 521 } 522 523 static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc, 524 struct usb_ctrlrequest *ctrl, int set) 525 { 526 struct dwc3_ep *dep; 527 u32 wValue; 528 int ret; 529 530 wValue = le16_to_cpu(ctrl->wValue); 531 532 switch (wValue) { 533 case USB_ENDPOINT_HALT: 534 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); 535 if (!dep) 536 return -EINVAL; 537 538 if (set == 0 && (dep->flags & DWC3_EP_WEDGE)) 539 break; 540 541 ret = __dwc3_gadget_ep_set_halt(dep, set, true); 542 if (ret) 543 return -EINVAL; 544 545 /* ClearFeature(Halt) may need delayed status */ 546 if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING)) 547 return USB_GADGET_DELAYED_STATUS; 548 549 break; 550 default: 551 return -EINVAL; 552 } 553 554 return 0; 555 } 556 557 static int dwc3_ep0_handle_feature(struct dwc3 *dwc, 558 struct usb_ctrlrequest *ctrl, int set) 559 { 560 u32 recip; 561 int ret; 562 563 recip = ctrl->bRequestType & USB_RECIP_MASK; 564 565 switch (recip) { 566 case USB_RECIP_DEVICE: 567 ret = dwc3_ep0_handle_device(dwc, ctrl, set); 568 break; 569 case USB_RECIP_INTERFACE: 570 ret = dwc3_ep0_handle_intf(dwc, ctrl, set); 571 break; 572 case USB_RECIP_ENDPOINT: 573 ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set); 574 break; 575 default: 576 ret = -EINVAL; 577 } 578 579 return ret; 580 } 581 582 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 583 { 584 enum usb_device_state state = dwc->gadget->state; 585 u32 addr; 586 u32 reg; 587 588 addr = le16_to_cpu(ctrl->wValue); 589 if (addr > 127) { 590 dev_err(dwc->dev, "invalid device address %d\n", addr); 591 return -EINVAL; 592 } 593 594 if (state == USB_STATE_CONFIGURED) { 595 dev_err(dwc->dev, "can't SetAddress() from Configured State\n"); 596 return -EINVAL; 597 } 598 599 reg = dwc3_readl(dwc->regs, DWC3_DCFG); 600 reg &= ~(DWC3_DCFG_DEVADDR_MASK); 601 reg |= DWC3_DCFG_DEVADDR(addr); 602 dwc3_writel(dwc->regs, DWC3_DCFG, reg); 603 604 if (addr) 605 usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS); 606 else 607 usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT); 608 609 return 0; 610 } 611 612 static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 613 { 614 int ret = -EINVAL; 615 616 if (dwc->async_callbacks) { 617 spin_unlock(&dwc->lock); 618 ret = dwc->gadget_driver->setup(dwc->gadget, ctrl); 619 spin_lock(&dwc->lock); 620 } 621 return ret; 622 } 623 624 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 625 { 626 enum usb_device_state state = dwc->gadget->state; 627 u32 cfg; 628 int ret; 629 u32 reg; 630 631 cfg = le16_to_cpu(ctrl->wValue); 632 633 switch (state) { 634 case USB_STATE_DEFAULT: 635 return -EINVAL; 636 637 case USB_STATE_ADDRESS: 638 dwc3_gadget_clear_tx_fifos(dwc); 639 640 ret = dwc3_ep0_delegate_req(dwc, ctrl); 641 /* if the cfg matches and the cfg is non zero */ 642 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) { 643 644 /* 645 * only change state if set_config has already 646 * been processed. If gadget driver returns 647 * USB_GADGET_DELAYED_STATUS, we will wait 648 * to change the state on the next usb_ep_queue() 649 */ 650 if (ret == 0) 651 usb_gadget_set_state(dwc->gadget, 652 USB_STATE_CONFIGURED); 653 654 /* 655 * Enable transition to U1/U2 state when 656 * nothing is pending from application. 657 */ 658 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 659 if (!dwc->dis_u1_entry_quirk) 660 reg |= DWC3_DCTL_ACCEPTU1ENA; 661 if (!dwc->dis_u2_entry_quirk) 662 reg |= DWC3_DCTL_ACCEPTU2ENA; 663 dwc3_writel(dwc->regs, DWC3_DCTL, reg); 664 } 665 break; 666 667 case USB_STATE_CONFIGURED: 668 ret = dwc3_ep0_delegate_req(dwc, ctrl); 669 if (!cfg && !ret) 670 usb_gadget_set_state(dwc->gadget, 671 USB_STATE_ADDRESS); 672 break; 673 default: 674 ret = -EINVAL; 675 } 676 return ret; 677 } 678 679 static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) 680 { 681 struct dwc3_ep *dep = to_dwc3_ep(ep); 682 struct dwc3 *dwc = dep->dwc; 683 684 u32 param = 0; 685 u32 reg; 686 687 struct timing { 688 u8 u1sel; 689 u8 u1pel; 690 __le16 u2sel; 691 __le16 u2pel; 692 } __packed timing; 693 694 int ret; 695 696 memcpy(&timing, req->buf, sizeof(timing)); 697 698 dwc->u1sel = timing.u1sel; 699 dwc->u1pel = timing.u1pel; 700 dwc->u2sel = le16_to_cpu(timing.u2sel); 701 dwc->u2pel = le16_to_cpu(timing.u2pel); 702 703 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 704 if (reg & DWC3_DCTL_INITU2ENA) 705 param = dwc->u2pel; 706 if (reg & DWC3_DCTL_INITU1ENA) 707 param = dwc->u1pel; 708 709 /* 710 * According to Synopsys Databook, if parameter is 711 * greater than 125, a value of zero should be 712 * programmed in the register. 713 */ 714 if (param > 125) 715 param = 0; 716 717 /* now that we have the time, issue DGCMD Set Sel */ 718 ret = dwc3_send_gadget_generic_command(dwc, 719 DWC3_DGCMD_SET_PERIODIC_PAR, param); 720 WARN_ON(ret < 0); 721 } 722 723 static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 724 { 725 struct dwc3_ep *dep; 726 enum usb_device_state state = dwc->gadget->state; 727 u16 wLength; 728 729 if (state == USB_STATE_DEFAULT) 730 return -EINVAL; 731 732 wLength = le16_to_cpu(ctrl->wLength); 733 734 if (wLength != 6) { 735 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n", 736 wLength); 737 return -EINVAL; 738 } 739 740 /* 741 * To handle Set SEL we need to receive 6 bytes from Host. So let's 742 * queue a usb_request for 6 bytes. 743 * 744 * Remember, though, this controller can't handle non-wMaxPacketSize 745 * aligned transfers on the OUT direction, so we queue a request for 746 * wMaxPacketSize instead. 747 */ 748 dep = dwc->eps[0]; 749 dwc->ep0_usb_req.dep = dep; 750 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket; 751 dwc->ep0_usb_req.request.buf = dwc->setup_buf; 752 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl; 753 754 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); 755 } 756 757 static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 758 { 759 u16 wLength; 760 u16 wValue; 761 u16 wIndex; 762 763 wValue = le16_to_cpu(ctrl->wValue); 764 wLength = le16_to_cpu(ctrl->wLength); 765 wIndex = le16_to_cpu(ctrl->wIndex); 766 767 if (wIndex || wLength) 768 return -EINVAL; 769 770 dwc->gadget->isoch_delay = wValue; 771 772 return 0; 773 } 774 775 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 776 { 777 int ret; 778 779 switch (ctrl->bRequest) { 780 case USB_REQ_GET_STATUS: 781 ret = dwc3_ep0_handle_status(dwc, ctrl); 782 break; 783 case USB_REQ_CLEAR_FEATURE: 784 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0); 785 break; 786 case USB_REQ_SET_FEATURE: 787 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1); 788 break; 789 case USB_REQ_SET_ADDRESS: 790 ret = dwc3_ep0_set_address(dwc, ctrl); 791 break; 792 case USB_REQ_SET_CONFIGURATION: 793 ret = dwc3_ep0_set_config(dwc, ctrl); 794 break; 795 case USB_REQ_SET_SEL: 796 ret = dwc3_ep0_set_sel(dwc, ctrl); 797 break; 798 case USB_REQ_SET_ISOCH_DELAY: 799 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); 800 break; 801 default: 802 ret = dwc3_ep0_delegate_req(dwc, ctrl); 803 break; 804 } 805 806 return ret; 807 } 808 809 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, 810 const struct dwc3_event_depevt *event) 811 { 812 struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb; 813 int ret = -EINVAL; 814 u32 len; 815 816 if (!dwc->gadget_driver || !dwc->connected) 817 goto out; 818 819 trace_dwc3_ctrl_req(ctrl); 820 821 len = le16_to_cpu(ctrl->wLength); 822 if (!len) { 823 dwc->three_stage_setup = false; 824 dwc->ep0_expect_in = false; 825 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; 826 } else { 827 dwc->three_stage_setup = true; 828 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN); 829 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA; 830 } 831 832 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) 833 ret = dwc3_ep0_std_request(dwc, ctrl); 834 else 835 ret = dwc3_ep0_delegate_req(dwc, ctrl); 836 837 if (ret == USB_GADGET_DELAYED_STATUS) 838 dwc->delayed_status = true; 839 840 out: 841 if (ret < 0) 842 dwc3_ep0_stall_and_restart(dwc); 843 } 844 845 static void dwc3_ep0_complete_data(struct dwc3 *dwc, 846 const struct dwc3_event_depevt *event) 847 { 848 struct dwc3_request *r; 849 struct usb_request *ur; 850 struct dwc3_trb *trb; 851 struct dwc3_ep *ep0; 852 u32 transferred = 0; 853 u32 status; 854 u32 length; 855 u8 epnum; 856 857 epnum = event->endpoint_number; 858 ep0 = dwc->eps[0]; 859 860 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; 861 trb = dwc->ep0_trb; 862 trace_dwc3_complete_trb(ep0, trb); 863 864 r = next_request(&ep0->pending_list); 865 if (!r) 866 return; 867 868 status = DWC3_TRB_SIZE_TRBSTS(trb->size); 869 if (status == DWC3_TRBSTS_SETUP_PENDING) { 870 dwc->setup_packet_pending = true; 871 if (r) 872 dwc3_gadget_giveback(ep0, r, -ECONNRESET); 873 874 return; 875 } 876 877 ur = &r->request; 878 879 length = trb->size & DWC3_TRB_SIZE_MASK; 880 transferred = ur->length - length; 881 ur->actual += transferred; 882 883 if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) && 884 ur->length && ur->zero) || dwc->ep0_bounced) { 885 trb++; 886 trb->ctrl &= ~DWC3_TRB_CTRL_HWO; 887 trace_dwc3_complete_trb(ep0, trb); 888 889 if (r->direction) 890 dwc->eps[1]->trb_enqueue = 0; 891 else 892 dwc->eps[0]->trb_enqueue = 0; 893 894 dwc->ep0_bounced = false; 895 } 896 897 if ((epnum & 1) && ur->actual < ur->length) 898 dwc3_ep0_stall_and_restart(dwc); 899 else 900 dwc3_gadget_giveback(ep0, r, 0); 901 } 902 903 static void dwc3_ep0_complete_status(struct dwc3 *dwc, 904 const struct dwc3_event_depevt *event) 905 { 906 struct dwc3_request *r; 907 struct dwc3_ep *dep; 908 struct dwc3_trb *trb; 909 u32 status; 910 911 dep = dwc->eps[0]; 912 trb = dwc->ep0_trb; 913 914 trace_dwc3_complete_trb(dep, trb); 915 916 if (!list_empty(&dep->pending_list)) { 917 r = next_request(&dep->pending_list); 918 919 dwc3_gadget_giveback(dep, r, 0); 920 } 921 922 if (dwc->test_mode) { 923 int ret; 924 925 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr); 926 if (ret < 0) { 927 dev_err(dwc->dev, "invalid test #%d\n", 928 dwc->test_mode_nr); 929 dwc3_ep0_stall_and_restart(dwc); 930 return; 931 } 932 } 933 934 status = DWC3_TRB_SIZE_TRBSTS(trb->size); 935 if (status == DWC3_TRBSTS_SETUP_PENDING) 936 dwc->setup_packet_pending = true; 937 938 dwc->ep0state = EP0_SETUP_PHASE; 939 dwc3_ep0_out_start(dwc); 940 } 941 942 static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, 943 const struct dwc3_event_depevt *event) 944 { 945 struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; 946 947 dep->flags &= ~DWC3_EP_TRANSFER_STARTED; 948 dep->resource_index = 0; 949 dwc->setup_packet_pending = false; 950 951 switch (dwc->ep0state) { 952 case EP0_SETUP_PHASE: 953 dwc3_ep0_inspect_setup(dwc, event); 954 break; 955 956 case EP0_DATA_PHASE: 957 dwc3_ep0_complete_data(dwc, event); 958 break; 959 960 case EP0_STATUS_PHASE: 961 dwc3_ep0_complete_status(dwc, event); 962 break; 963 default: 964 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state); 965 } 966 } 967 968 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, 969 struct dwc3_ep *dep, struct dwc3_request *req) 970 { 971 unsigned int trb_length = 0; 972 int ret; 973 974 req->direction = !!dep->number; 975 976 if (req->request.length == 0) { 977 if (!req->direction) 978 trb_length = dep->endpoint.maxpacket; 979 980 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length, 981 DWC3_TRBCTL_CONTROL_DATA, false); 982 ret = dwc3_ep0_start_trans(dep); 983 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) 984 && (dep->number == 0)) { 985 u32 maxpacket; 986 u32 rem; 987 988 ret = usb_gadget_map_request_by_dev(dwc->sysdev, 989 &req->request, dep->number); 990 if (ret) 991 return; 992 993 maxpacket = dep->endpoint.maxpacket; 994 rem = req->request.length % maxpacket; 995 dwc->ep0_bounced = true; 996 997 /* prepare normal TRB */ 998 dwc3_ep0_prepare_one_trb(dep, req->request.dma, 999 req->request.length, 1000 DWC3_TRBCTL_CONTROL_DATA, 1001 true); 1002 1003 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1]; 1004 1005 /* Now prepare one extra TRB to align transfer size */ 1006 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, 1007 maxpacket - rem, 1008 DWC3_TRBCTL_CONTROL_DATA, 1009 false); 1010 ret = dwc3_ep0_start_trans(dep); 1011 } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && 1012 req->request.length && req->request.zero) { 1013 1014 ret = usb_gadget_map_request_by_dev(dwc->sysdev, 1015 &req->request, dep->number); 1016 if (ret) 1017 return; 1018 1019 /* prepare normal TRB */ 1020 dwc3_ep0_prepare_one_trb(dep, req->request.dma, 1021 req->request.length, 1022 DWC3_TRBCTL_CONTROL_DATA, 1023 true); 1024 1025 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1]; 1026 1027 if (!req->direction) 1028 trb_length = dep->endpoint.maxpacket; 1029 1030 /* Now prepare one extra TRB to align transfer size */ 1031 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, 1032 trb_length, DWC3_TRBCTL_CONTROL_DATA, 1033 false); 1034 ret = dwc3_ep0_start_trans(dep); 1035 } else { 1036 ret = usb_gadget_map_request_by_dev(dwc->sysdev, 1037 &req->request, dep->number); 1038 if (ret) 1039 return; 1040 1041 dwc3_ep0_prepare_one_trb(dep, req->request.dma, 1042 req->request.length, DWC3_TRBCTL_CONTROL_DATA, 1043 false); 1044 1045 req->trb = &dwc->ep0_trb[dep->trb_enqueue]; 1046 1047 ret = dwc3_ep0_start_trans(dep); 1048 } 1049 1050 WARN_ON(ret < 0); 1051 } 1052 1053 static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) 1054 { 1055 struct dwc3 *dwc = dep->dwc; 1056 u32 type; 1057 1058 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 1059 : DWC3_TRBCTL_CONTROL_STATUS2; 1060 1061 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false); 1062 return dwc3_ep0_start_trans(dep); 1063 } 1064 1065 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) 1066 { 1067 WARN_ON(dwc3_ep0_start_control_status(dep)); 1068 } 1069 1070 static void dwc3_ep0_do_control_status(struct dwc3 *dwc, 1071 const struct dwc3_event_depevt *event) 1072 { 1073 struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; 1074 1075 __dwc3_ep0_do_control_status(dwc, dep); 1076 } 1077 1078 void dwc3_ep0_send_delayed_status(struct dwc3 *dwc) 1079 { 1080 unsigned int direction = !dwc->ep0_expect_in; 1081 1082 dwc->delayed_status = false; 1083 dwc->clear_stall_protocol = 0; 1084 1085 if (dwc->ep0state != EP0_STATUS_PHASE) 1086 return; 1087 1088 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); 1089 } 1090 1091 void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) 1092 { 1093 struct dwc3_gadget_ep_cmd_params params; 1094 u32 cmd; 1095 int ret; 1096 1097 /* 1098 * For status/DATA OUT stage, TRB will be queued on ep0 out 1099 * endpoint for which resource index is zero. Hence allow 1100 * queuing ENDXFER command for ep0 out endpoint. 1101 */ 1102 if (!dep->resource_index && dep->number) 1103 return; 1104 1105 cmd = DWC3_DEPCMD_ENDTRANSFER; 1106 cmd |= DWC3_DEPCMD_CMDIOC; 1107 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); 1108 memset(¶ms, 0, sizeof(params)); 1109 ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); 1110 WARN_ON_ONCE(ret); 1111 dep->resource_index = 0; 1112 } 1113 1114 static void dwc3_ep0_xfernotready(struct dwc3 *dwc, 1115 const struct dwc3_event_depevt *event) 1116 { 1117 switch (event->status) { 1118 case DEPEVT_STATUS_CONTROL_DATA: 1119 /* 1120 * We already have a DATA transfer in the controller's cache, 1121 * if we receive a XferNotReady(DATA) we will ignore it, unless 1122 * it's for the wrong direction. 1123 * 1124 * In that case, we must issue END_TRANSFER command to the Data 1125 * Phase we already have started and issue SetStall on the 1126 * control endpoint. 1127 */ 1128 if (dwc->ep0_expect_in != event->endpoint_number) { 1129 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in]; 1130 1131 dev_err(dwc->dev, "unexpected direction for Data Phase\n"); 1132 dwc3_ep0_end_control_data(dwc, dep); 1133 dwc3_ep0_stall_and_restart(dwc); 1134 return; 1135 } 1136 1137 break; 1138 1139 case DEPEVT_STATUS_CONTROL_STATUS: 1140 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) 1141 return; 1142 1143 dwc->ep0state = EP0_STATUS_PHASE; 1144 1145 if (dwc->delayed_status) { 1146 struct dwc3_ep *dep = dwc->eps[0]; 1147 1148 WARN_ON_ONCE(event->endpoint_number != 1); 1149 /* 1150 * We should handle the delay STATUS phase here if the 1151 * request for handling delay STATUS has been queued 1152 * into the list. 1153 */ 1154 if (!list_empty(&dep->pending_list)) { 1155 dwc->delayed_status = false; 1156 usb_gadget_set_state(dwc->gadget, 1157 USB_STATE_CONFIGURED); 1158 dwc3_ep0_do_control_status(dwc, event); 1159 } 1160 1161 return; 1162 } 1163 1164 dwc3_ep0_do_control_status(dwc, event); 1165 } 1166 } 1167 1168 void dwc3_ep0_interrupt(struct dwc3 *dwc, 1169 const struct dwc3_event_depevt *event) 1170 { 1171 struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; 1172 u8 cmd; 1173 1174 switch (event->endpoint_event) { 1175 case DWC3_DEPEVT_XFERCOMPLETE: 1176 dwc3_ep0_xfer_complete(dwc, event); 1177 break; 1178 1179 case DWC3_DEPEVT_XFERNOTREADY: 1180 dwc3_ep0_xfernotready(dwc, event); 1181 break; 1182 1183 case DWC3_DEPEVT_XFERINPROGRESS: 1184 case DWC3_DEPEVT_RXTXFIFOEVT: 1185 case DWC3_DEPEVT_STREAMEVT: 1186 break; 1187 case DWC3_DEPEVT_EPCMDCMPLT: 1188 cmd = DEPEVT_PARAMETER_CMD(event->parameters); 1189 1190 if (cmd == DWC3_DEPCMD_ENDTRANSFER) { 1191 dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; 1192 dep->flags &= ~DWC3_EP_TRANSFER_STARTED; 1193 } 1194 break; 1195 } 1196 } 1197