1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling 4 * 5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com 6 * 7 * Authors: Felipe Balbi <balbi@ti.com>, 8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/slab.h> 13 #include <linux/spinlock.h> 14 #include <linux/platform_device.h> 15 #include <linux/pm_runtime.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/list.h> 19 #include <linux/dma-mapping.h> 20 21 #include <linux/usb/ch9.h> 22 #include <linux/usb/gadget.h> 23 #include <linux/usb/composite.h> 24 25 #include "core.h" 26 #include "debug.h" 27 #include "gadget.h" 28 #include "io.h" 29 30 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep); 31 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, 32 struct dwc3_ep *dep, struct dwc3_request *req); 33 34 static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep, 35 dma_addr_t buf_dma, u32 len, u32 type, bool chain) 36 { 37 struct dwc3_trb *trb; 38 struct dwc3 *dwc; 39 40 dwc = dep->dwc; 41 trb = &dwc->ep0_trb[dep->trb_enqueue]; 42 43 if (chain) 44 dep->trb_enqueue++; 45 46 trb->bpl = lower_32_bits(buf_dma); 47 trb->bph = upper_32_bits(buf_dma); 48 trb->size = len; 49 trb->ctrl = type; 50 51 trb->ctrl |= (DWC3_TRB_CTRL_HWO 52 | DWC3_TRB_CTRL_ISP_IMI); 53 54 if (chain) 55 trb->ctrl |= DWC3_TRB_CTRL_CHN; 56 else 57 trb->ctrl |= (DWC3_TRB_CTRL_IOC 58 | DWC3_TRB_CTRL_LST); 59 60 trace_dwc3_prepare_trb(dep, trb); 61 } 62 63 static int dwc3_ep0_start_trans(struct dwc3_ep *dep) 64 { 65 struct dwc3_gadget_ep_cmd_params params; 66 struct dwc3 *dwc; 67 int ret; 68 69 if (dep->flags & DWC3_EP_TRANSFER_STARTED) 70 return 0; 71 72 dwc = dep->dwc; 73 74 memset(¶ms, 0, sizeof(params)); 75 params.param0 = upper_32_bits(dwc->ep0_trb_addr); 76 params.param1 = lower_32_bits(dwc->ep0_trb_addr); 77 78 ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms); 79 if (ret < 0) 80 return ret; 81 82 dwc->ep0_next_event = DWC3_EP0_COMPLETE; 83 84 return 0; 85 } 86 87 static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, 88 struct dwc3_request *req) 89 { 90 struct dwc3 *dwc = dep->dwc; 91 92 req->request.actual = 0; 93 req->request.status = -EINPROGRESS; 94 req->epnum = dep->number; 95 96 list_add_tail(&req->list, &dep->pending_list); 97 98 /* 99 * Gadget driver might not be quick enough to queue a request 100 * before we get a Transfer Not Ready event on this endpoint. 101 * 102 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that 103 * flag is set, it's telling us that as soon as Gadget queues the 104 * required request, we should kick the transfer here because the 105 * IRQ we were waiting for is long gone. 106 */ 107 if (dep->flags & DWC3_EP_PENDING_REQUEST) { 108 unsigned direction; 109 110 direction = !!(dep->flags & DWC3_EP0_DIR_IN); 111 112 if (dwc->ep0state != EP0_DATA_PHASE) { 113 dev_WARN(dwc->dev, "Unexpected pending request\n"); 114 return 0; 115 } 116 117 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); 118 119 dep->flags &= ~(DWC3_EP_PENDING_REQUEST | 120 DWC3_EP0_DIR_IN); 121 122 return 0; 123 } 124 125 /* 126 * In case gadget driver asked us to delay the STATUS phase, 127 * handle it here. 128 */ 129 if (dwc->delayed_status) { 130 unsigned direction; 131 132 direction = !dwc->ep0_expect_in; 133 dwc->delayed_status = false; 134 usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED); 135 136 if (dwc->ep0state == EP0_STATUS_PHASE) 137 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); 138 139 return 0; 140 } 141 142 /* 143 * Unfortunately we have uncovered a limitation wrt the Data Phase. 144 * 145 * Section 9.4 says we can wait for the XferNotReady(DATA) event to 146 * come before issueing Start Transfer command, but if we do, we will 147 * miss situations where the host starts another SETUP phase instead of 148 * the DATA phase. Such cases happen at least on TD.7.6 of the Link 149 * Layer Compliance Suite. 150 * 151 * The problem surfaces due to the fact that in case of back-to-back 152 * SETUP packets there will be no XferNotReady(DATA) generated and we 153 * will be stuck waiting for XferNotReady(DATA) forever. 154 * 155 * By looking at tables 9-13 and 9-14 of the Databook, we can see that 156 * it tells us to start Data Phase right away. It also mentions that if 157 * we receive a SETUP phase instead of the DATA phase, core will issue 158 * XferComplete for the DATA phase, before actually initiating it in 159 * the wire, with the TRB's status set to "SETUP_PENDING". Such status 160 * can only be used to print some debugging logs, as the core expects 161 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB, 162 * just so it completes right away, without transferring anything and, 163 * only then, we can go back to the SETUP phase. 164 * 165 * Because of this scenario, SNPS decided to change the programming 166 * model of control transfers and support on-demand transfers only for 167 * the STATUS phase. To fix the issue we have now, we will always wait 168 * for gadget driver to queue the DATA phase's struct usb_request, then 169 * start it right away. 170 * 171 * If we're actually in a 2-stage transfer, we will wait for 172 * XferNotReady(STATUS). 173 */ 174 if (dwc->three_stage_setup) { 175 unsigned direction; 176 177 direction = dwc->ep0_expect_in; 178 dwc->ep0state = EP0_DATA_PHASE; 179 180 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); 181 182 dep->flags &= ~DWC3_EP0_DIR_IN; 183 } 184 185 return 0; 186 } 187 188 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, 189 gfp_t gfp_flags) 190 { 191 struct dwc3_request *req = to_dwc3_request(request); 192 struct dwc3_ep *dep = to_dwc3_ep(ep); 193 struct dwc3 *dwc = dep->dwc; 194 195 unsigned long flags; 196 197 int ret; 198 199 spin_lock_irqsave(&dwc->lock, flags); 200 if (!dep->endpoint.desc) { 201 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", 202 dep->name); 203 ret = -ESHUTDOWN; 204 goto out; 205 } 206 207 /* we share one TRB for ep0/1 */ 208 if (!list_empty(&dep->pending_list)) { 209 ret = -EBUSY; 210 goto out; 211 } 212 213 ret = __dwc3_gadget_ep0_queue(dep, req); 214 215 out: 216 spin_unlock_irqrestore(&dwc->lock, flags); 217 218 return ret; 219 } 220 221 static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) 222 { 223 struct dwc3_ep *dep; 224 225 /* reinitialize physical ep1 */ 226 dep = dwc->eps[1]; 227 dep->flags = DWC3_EP_ENABLED; 228 229 /* stall is always issued on EP0 */ 230 dep = dwc->eps[0]; 231 __dwc3_gadget_ep_set_halt(dep, 1, false); 232 dep->flags = DWC3_EP_ENABLED; 233 dwc->delayed_status = false; 234 235 if (!list_empty(&dep->pending_list)) { 236 struct dwc3_request *req; 237 238 req = next_request(&dep->pending_list); 239 dwc3_gadget_giveback(dep, req, -ECONNRESET); 240 } 241 242 dwc->ep0state = EP0_SETUP_PHASE; 243 dwc3_ep0_out_start(dwc); 244 } 245 246 int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value) 247 { 248 struct dwc3_ep *dep = to_dwc3_ep(ep); 249 struct dwc3 *dwc = dep->dwc; 250 251 dwc3_ep0_stall_and_restart(dwc); 252 253 return 0; 254 } 255 256 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value) 257 { 258 struct dwc3_ep *dep = to_dwc3_ep(ep); 259 struct dwc3 *dwc = dep->dwc; 260 unsigned long flags; 261 int ret; 262 263 spin_lock_irqsave(&dwc->lock, flags); 264 ret = __dwc3_gadget_ep0_set_halt(ep, value); 265 spin_unlock_irqrestore(&dwc->lock, flags); 266 267 return ret; 268 } 269 270 void dwc3_ep0_out_start(struct dwc3 *dwc) 271 { 272 struct dwc3_ep *dep; 273 int ret; 274 275 complete(&dwc->ep0_in_setup); 276 277 dep = dwc->eps[0]; 278 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8, 279 DWC3_TRBCTL_CONTROL_SETUP, false); 280 ret = dwc3_ep0_start_trans(dep); 281 WARN_ON(ret < 0); 282 } 283 284 static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le) 285 { 286 struct dwc3_ep *dep; 287 u32 windex = le16_to_cpu(wIndex_le); 288 u32 epnum; 289 290 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1; 291 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) 292 epnum |= 1; 293 294 dep = dwc->eps[epnum]; 295 if (dep->flags & DWC3_EP_ENABLED) 296 return dep; 297 298 return NULL; 299 } 300 301 static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req) 302 { 303 } 304 /* 305 * ch 9.4.5 306 */ 307 static int dwc3_ep0_handle_status(struct dwc3 *dwc, 308 struct usb_ctrlrequest *ctrl) 309 { 310 struct dwc3_ep *dep; 311 u32 recip; 312 u32 value; 313 u32 reg; 314 u16 usb_status = 0; 315 __le16 *response_pkt; 316 317 /* We don't support PTM_STATUS */ 318 value = le16_to_cpu(ctrl->wValue); 319 if (value != 0) 320 return -EINVAL; 321 322 recip = ctrl->bRequestType & USB_RECIP_MASK; 323 switch (recip) { 324 case USB_RECIP_DEVICE: 325 /* 326 * LTM will be set once we know how to set this in HW. 327 */ 328 usb_status |= dwc->gadget.is_selfpowered; 329 330 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) || 331 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) { 332 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 333 if (reg & DWC3_DCTL_INITU1ENA) 334 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED; 335 if (reg & DWC3_DCTL_INITU2ENA) 336 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED; 337 } 338 339 break; 340 341 case USB_RECIP_INTERFACE: 342 /* 343 * Function Remote Wake Capable D0 344 * Function Remote Wakeup D1 345 */ 346 break; 347 348 case USB_RECIP_ENDPOINT: 349 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); 350 if (!dep) 351 return -EINVAL; 352 353 if (dep->flags & DWC3_EP_STALL) 354 usb_status = 1 << USB_ENDPOINT_HALT; 355 break; 356 default: 357 return -EINVAL; 358 } 359 360 response_pkt = (__le16 *) dwc->setup_buf; 361 *response_pkt = cpu_to_le16(usb_status); 362 363 dep = dwc->eps[0]; 364 dwc->ep0_usb_req.dep = dep; 365 dwc->ep0_usb_req.request.length = sizeof(*response_pkt); 366 dwc->ep0_usb_req.request.buf = dwc->setup_buf; 367 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl; 368 369 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); 370 } 371 372 static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state, 373 int set) 374 { 375 u32 reg; 376 377 if (state != USB_STATE_CONFIGURED) 378 return -EINVAL; 379 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && 380 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) 381 return -EINVAL; 382 if (set && dwc->dis_u1_entry_quirk) 383 return -EINVAL; 384 385 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 386 if (set) 387 reg |= DWC3_DCTL_INITU1ENA; 388 else 389 reg &= ~DWC3_DCTL_INITU1ENA; 390 dwc3_writel(dwc->regs, DWC3_DCTL, reg); 391 392 return 0; 393 } 394 395 static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state, 396 int set) 397 { 398 u32 reg; 399 400 401 if (state != USB_STATE_CONFIGURED) 402 return -EINVAL; 403 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && 404 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) 405 return -EINVAL; 406 if (set && dwc->dis_u2_entry_quirk) 407 return -EINVAL; 408 409 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 410 if (set) 411 reg |= DWC3_DCTL_INITU2ENA; 412 else 413 reg &= ~DWC3_DCTL_INITU2ENA; 414 dwc3_writel(dwc->regs, DWC3_DCTL, reg); 415 416 return 0; 417 } 418 419 static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state, 420 u32 wIndex, int set) 421 { 422 if ((wIndex & 0xff) != 0) 423 return -EINVAL; 424 if (!set) 425 return -EINVAL; 426 427 switch (wIndex >> 8) { 428 case USB_TEST_J: 429 case USB_TEST_K: 430 case USB_TEST_SE0_NAK: 431 case USB_TEST_PACKET: 432 case USB_TEST_FORCE_ENABLE: 433 dwc->test_mode_nr = wIndex >> 8; 434 dwc->test_mode = true; 435 break; 436 default: 437 return -EINVAL; 438 } 439 440 return 0; 441 } 442 443 static int dwc3_ep0_handle_device(struct dwc3 *dwc, 444 struct usb_ctrlrequest *ctrl, int set) 445 { 446 enum usb_device_state state; 447 u32 wValue; 448 u32 wIndex; 449 int ret = 0; 450 451 wValue = le16_to_cpu(ctrl->wValue); 452 wIndex = le16_to_cpu(ctrl->wIndex); 453 state = dwc->gadget.state; 454 455 switch (wValue) { 456 case USB_DEVICE_REMOTE_WAKEUP: 457 break; 458 /* 459 * 9.4.1 says only only for SS, in AddressState only for 460 * default control pipe 461 */ 462 case USB_DEVICE_U1_ENABLE: 463 ret = dwc3_ep0_handle_u1(dwc, state, set); 464 break; 465 case USB_DEVICE_U2_ENABLE: 466 ret = dwc3_ep0_handle_u2(dwc, state, set); 467 break; 468 case USB_DEVICE_LTM_ENABLE: 469 ret = -EINVAL; 470 break; 471 case USB_DEVICE_TEST_MODE: 472 ret = dwc3_ep0_handle_test(dwc, state, wIndex, set); 473 break; 474 default: 475 ret = -EINVAL; 476 } 477 478 return ret; 479 } 480 481 static int dwc3_ep0_handle_intf(struct dwc3 *dwc, 482 struct usb_ctrlrequest *ctrl, int set) 483 { 484 u32 wValue; 485 int ret = 0; 486 487 wValue = le16_to_cpu(ctrl->wValue); 488 489 switch (wValue) { 490 case USB_INTRF_FUNC_SUSPEND: 491 /* 492 * REVISIT: Ideally we would enable some low power mode here, 493 * however it's unclear what we should be doing here. 494 * 495 * For now, we're not doing anything, just making sure we return 496 * 0 so USB Command Verifier tests pass without any errors. 497 */ 498 break; 499 default: 500 ret = -EINVAL; 501 } 502 503 return ret; 504 } 505 506 static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc, 507 struct usb_ctrlrequest *ctrl, int set) 508 { 509 struct dwc3_ep *dep; 510 u32 wValue; 511 int ret; 512 513 wValue = le16_to_cpu(ctrl->wValue); 514 515 switch (wValue) { 516 case USB_ENDPOINT_HALT: 517 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); 518 if (!dep) 519 return -EINVAL; 520 521 if (set == 0 && (dep->flags & DWC3_EP_WEDGE)) 522 break; 523 524 ret = __dwc3_gadget_ep_set_halt(dep, set, true); 525 if (ret) 526 return -EINVAL; 527 break; 528 default: 529 return -EINVAL; 530 } 531 532 return 0; 533 } 534 535 static int dwc3_ep0_handle_feature(struct dwc3 *dwc, 536 struct usb_ctrlrequest *ctrl, int set) 537 { 538 u32 recip; 539 int ret; 540 541 recip = ctrl->bRequestType & USB_RECIP_MASK; 542 543 switch (recip) { 544 case USB_RECIP_DEVICE: 545 ret = dwc3_ep0_handle_device(dwc, ctrl, set); 546 break; 547 case USB_RECIP_INTERFACE: 548 ret = dwc3_ep0_handle_intf(dwc, ctrl, set); 549 break; 550 case USB_RECIP_ENDPOINT: 551 ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set); 552 break; 553 default: 554 ret = -EINVAL; 555 } 556 557 return ret; 558 } 559 560 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 561 { 562 enum usb_device_state state = dwc->gadget.state; 563 u32 addr; 564 u32 reg; 565 566 addr = le16_to_cpu(ctrl->wValue); 567 if (addr > 127) { 568 dev_err(dwc->dev, "invalid device address %d\n", addr); 569 return -EINVAL; 570 } 571 572 if (state == USB_STATE_CONFIGURED) { 573 dev_err(dwc->dev, "can't SetAddress() from Configured State\n"); 574 return -EINVAL; 575 } 576 577 reg = dwc3_readl(dwc->regs, DWC3_DCFG); 578 reg &= ~(DWC3_DCFG_DEVADDR_MASK); 579 reg |= DWC3_DCFG_DEVADDR(addr); 580 dwc3_writel(dwc->regs, DWC3_DCFG, reg); 581 582 if (addr) 583 usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS); 584 else 585 usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT); 586 587 return 0; 588 } 589 590 static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 591 { 592 int ret; 593 594 spin_unlock(&dwc->lock); 595 ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl); 596 spin_lock(&dwc->lock); 597 return ret; 598 } 599 600 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 601 { 602 enum usb_device_state state = dwc->gadget.state; 603 u32 cfg; 604 int ret; 605 u32 reg; 606 607 cfg = le16_to_cpu(ctrl->wValue); 608 609 switch (state) { 610 case USB_STATE_DEFAULT: 611 return -EINVAL; 612 613 case USB_STATE_ADDRESS: 614 ret = dwc3_ep0_delegate_req(dwc, ctrl); 615 /* if the cfg matches and the cfg is non zero */ 616 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) { 617 618 /* 619 * only change state if set_config has already 620 * been processed. If gadget driver returns 621 * USB_GADGET_DELAYED_STATUS, we will wait 622 * to change the state on the next usb_ep_queue() 623 */ 624 if (ret == 0) 625 usb_gadget_set_state(&dwc->gadget, 626 USB_STATE_CONFIGURED); 627 628 /* 629 * Enable transition to U1/U2 state when 630 * nothing is pending from application. 631 */ 632 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 633 if (!dwc->dis_u1_entry_quirk) 634 reg |= DWC3_DCTL_ACCEPTU1ENA; 635 if (!dwc->dis_u2_entry_quirk) 636 reg |= DWC3_DCTL_ACCEPTU2ENA; 637 dwc3_writel(dwc->regs, DWC3_DCTL, reg); 638 } 639 break; 640 641 case USB_STATE_CONFIGURED: 642 ret = dwc3_ep0_delegate_req(dwc, ctrl); 643 if (!cfg && !ret) 644 usb_gadget_set_state(&dwc->gadget, 645 USB_STATE_ADDRESS); 646 break; 647 default: 648 ret = -EINVAL; 649 } 650 return ret; 651 } 652 653 static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) 654 { 655 struct dwc3_ep *dep = to_dwc3_ep(ep); 656 struct dwc3 *dwc = dep->dwc; 657 658 u32 param = 0; 659 u32 reg; 660 661 struct timing { 662 u8 u1sel; 663 u8 u1pel; 664 __le16 u2sel; 665 __le16 u2pel; 666 } __packed timing; 667 668 int ret; 669 670 memcpy(&timing, req->buf, sizeof(timing)); 671 672 dwc->u1sel = timing.u1sel; 673 dwc->u1pel = timing.u1pel; 674 dwc->u2sel = le16_to_cpu(timing.u2sel); 675 dwc->u2pel = le16_to_cpu(timing.u2pel); 676 677 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 678 if (reg & DWC3_DCTL_INITU2ENA) 679 param = dwc->u2pel; 680 if (reg & DWC3_DCTL_INITU1ENA) 681 param = dwc->u1pel; 682 683 /* 684 * According to Synopsys Databook, if parameter is 685 * greater than 125, a value of zero should be 686 * programmed in the register. 687 */ 688 if (param > 125) 689 param = 0; 690 691 /* now that we have the time, issue DGCMD Set Sel */ 692 ret = dwc3_send_gadget_generic_command(dwc, 693 DWC3_DGCMD_SET_PERIODIC_PAR, param); 694 WARN_ON(ret < 0); 695 } 696 697 static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 698 { 699 struct dwc3_ep *dep; 700 enum usb_device_state state = dwc->gadget.state; 701 u16 wLength; 702 703 if (state == USB_STATE_DEFAULT) 704 return -EINVAL; 705 706 wLength = le16_to_cpu(ctrl->wLength); 707 708 if (wLength != 6) { 709 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n", 710 wLength); 711 return -EINVAL; 712 } 713 714 /* 715 * To handle Set SEL we need to receive 6 bytes from Host. So let's 716 * queue a usb_request for 6 bytes. 717 * 718 * Remember, though, this controller can't handle non-wMaxPacketSize 719 * aligned transfers on the OUT direction, so we queue a request for 720 * wMaxPacketSize instead. 721 */ 722 dep = dwc->eps[0]; 723 dwc->ep0_usb_req.dep = dep; 724 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket; 725 dwc->ep0_usb_req.request.buf = dwc->setup_buf; 726 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl; 727 728 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); 729 } 730 731 static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 732 { 733 u16 wLength; 734 u16 wValue; 735 u16 wIndex; 736 737 wValue = le16_to_cpu(ctrl->wValue); 738 wLength = le16_to_cpu(ctrl->wLength); 739 wIndex = le16_to_cpu(ctrl->wIndex); 740 741 if (wIndex || wLength) 742 return -EINVAL; 743 744 dwc->gadget.isoch_delay = wValue; 745 746 return 0; 747 } 748 749 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) 750 { 751 int ret; 752 753 switch (ctrl->bRequest) { 754 case USB_REQ_GET_STATUS: 755 ret = dwc3_ep0_handle_status(dwc, ctrl); 756 break; 757 case USB_REQ_CLEAR_FEATURE: 758 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0); 759 break; 760 case USB_REQ_SET_FEATURE: 761 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1); 762 break; 763 case USB_REQ_SET_ADDRESS: 764 ret = dwc3_ep0_set_address(dwc, ctrl); 765 break; 766 case USB_REQ_SET_CONFIGURATION: 767 ret = dwc3_ep0_set_config(dwc, ctrl); 768 break; 769 case USB_REQ_SET_SEL: 770 ret = dwc3_ep0_set_sel(dwc, ctrl); 771 break; 772 case USB_REQ_SET_ISOCH_DELAY: 773 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); 774 break; 775 default: 776 ret = dwc3_ep0_delegate_req(dwc, ctrl); 777 break; 778 } 779 780 return ret; 781 } 782 783 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, 784 const struct dwc3_event_depevt *event) 785 { 786 struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb; 787 int ret = -EINVAL; 788 u32 len; 789 790 if (!dwc->gadget_driver) 791 goto out; 792 793 trace_dwc3_ctrl_req(ctrl); 794 795 len = le16_to_cpu(ctrl->wLength); 796 if (!len) { 797 dwc->three_stage_setup = false; 798 dwc->ep0_expect_in = false; 799 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; 800 } else { 801 dwc->three_stage_setup = true; 802 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN); 803 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA; 804 } 805 806 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) 807 ret = dwc3_ep0_std_request(dwc, ctrl); 808 else 809 ret = dwc3_ep0_delegate_req(dwc, ctrl); 810 811 if (ret == USB_GADGET_DELAYED_STATUS) 812 dwc->delayed_status = true; 813 814 out: 815 if (ret < 0) 816 dwc3_ep0_stall_and_restart(dwc); 817 } 818 819 static void dwc3_ep0_complete_data(struct dwc3 *dwc, 820 const struct dwc3_event_depevt *event) 821 { 822 struct dwc3_request *r; 823 struct usb_request *ur; 824 struct dwc3_trb *trb; 825 struct dwc3_ep *ep0; 826 u32 transferred = 0; 827 u32 status; 828 u32 length; 829 u8 epnum; 830 831 epnum = event->endpoint_number; 832 ep0 = dwc->eps[0]; 833 834 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; 835 trb = dwc->ep0_trb; 836 trace_dwc3_complete_trb(ep0, trb); 837 838 r = next_request(&ep0->pending_list); 839 if (!r) 840 return; 841 842 status = DWC3_TRB_SIZE_TRBSTS(trb->size); 843 if (status == DWC3_TRBSTS_SETUP_PENDING) { 844 dwc->setup_packet_pending = true; 845 if (r) 846 dwc3_gadget_giveback(ep0, r, -ECONNRESET); 847 848 return; 849 } 850 851 ur = &r->request; 852 853 length = trb->size & DWC3_TRB_SIZE_MASK; 854 transferred = ur->length - length; 855 ur->actual += transferred; 856 857 if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) && 858 ur->length && ur->zero) || dwc->ep0_bounced) { 859 trb++; 860 trb->ctrl &= ~DWC3_TRB_CTRL_HWO; 861 trace_dwc3_complete_trb(ep0, trb); 862 863 if (r->direction) 864 dwc->eps[1]->trb_enqueue = 0; 865 else 866 dwc->eps[0]->trb_enqueue = 0; 867 868 dwc->ep0_bounced = false; 869 } 870 871 if ((epnum & 1) && ur->actual < ur->length) 872 dwc3_ep0_stall_and_restart(dwc); 873 else 874 dwc3_gadget_giveback(ep0, r, 0); 875 } 876 877 static void dwc3_ep0_complete_status(struct dwc3 *dwc, 878 const struct dwc3_event_depevt *event) 879 { 880 struct dwc3_request *r; 881 struct dwc3_ep *dep; 882 struct dwc3_trb *trb; 883 u32 status; 884 885 dep = dwc->eps[0]; 886 trb = dwc->ep0_trb; 887 888 trace_dwc3_complete_trb(dep, trb); 889 890 if (!list_empty(&dep->pending_list)) { 891 r = next_request(&dep->pending_list); 892 893 dwc3_gadget_giveback(dep, r, 0); 894 } 895 896 if (dwc->test_mode) { 897 int ret; 898 899 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr); 900 if (ret < 0) { 901 dev_err(dwc->dev, "invalid test #%d\n", 902 dwc->test_mode_nr); 903 dwc3_ep0_stall_and_restart(dwc); 904 return; 905 } 906 } 907 908 status = DWC3_TRB_SIZE_TRBSTS(trb->size); 909 if (status == DWC3_TRBSTS_SETUP_PENDING) 910 dwc->setup_packet_pending = true; 911 912 dwc->ep0state = EP0_SETUP_PHASE; 913 dwc3_ep0_out_start(dwc); 914 } 915 916 static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, 917 const struct dwc3_event_depevt *event) 918 { 919 struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; 920 921 dep->flags &= ~DWC3_EP_TRANSFER_STARTED; 922 dep->resource_index = 0; 923 dwc->setup_packet_pending = false; 924 925 switch (dwc->ep0state) { 926 case EP0_SETUP_PHASE: 927 dwc3_ep0_inspect_setup(dwc, event); 928 break; 929 930 case EP0_DATA_PHASE: 931 dwc3_ep0_complete_data(dwc, event); 932 break; 933 934 case EP0_STATUS_PHASE: 935 dwc3_ep0_complete_status(dwc, event); 936 break; 937 default: 938 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state); 939 } 940 } 941 942 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, 943 struct dwc3_ep *dep, struct dwc3_request *req) 944 { 945 int ret; 946 947 req->direction = !!dep->number; 948 949 if (req->request.length == 0) { 950 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, 951 DWC3_TRBCTL_CONTROL_DATA, false); 952 ret = dwc3_ep0_start_trans(dep); 953 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) 954 && (dep->number == 0)) { 955 u32 maxpacket; 956 u32 rem; 957 958 ret = usb_gadget_map_request_by_dev(dwc->sysdev, 959 &req->request, dep->number); 960 if (ret) 961 return; 962 963 maxpacket = dep->endpoint.maxpacket; 964 rem = req->request.length % maxpacket; 965 dwc->ep0_bounced = true; 966 967 /* prepare normal TRB */ 968 dwc3_ep0_prepare_one_trb(dep, req->request.dma, 969 req->request.length, 970 DWC3_TRBCTL_CONTROL_DATA, 971 true); 972 973 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1]; 974 975 /* Now prepare one extra TRB to align transfer size */ 976 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, 977 maxpacket - rem, 978 DWC3_TRBCTL_CONTROL_DATA, 979 false); 980 ret = dwc3_ep0_start_trans(dep); 981 } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && 982 req->request.length && req->request.zero) { 983 984 ret = usb_gadget_map_request_by_dev(dwc->sysdev, 985 &req->request, dep->number); 986 if (ret) 987 return; 988 989 /* prepare normal TRB */ 990 dwc3_ep0_prepare_one_trb(dep, req->request.dma, 991 req->request.length, 992 DWC3_TRBCTL_CONTROL_DATA, 993 true); 994 995 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1]; 996 997 /* Now prepare one extra TRB to align transfer size */ 998 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, 999 0, DWC3_TRBCTL_CONTROL_DATA, 1000 false); 1001 ret = dwc3_ep0_start_trans(dep); 1002 } else { 1003 ret = usb_gadget_map_request_by_dev(dwc->sysdev, 1004 &req->request, dep->number); 1005 if (ret) 1006 return; 1007 1008 dwc3_ep0_prepare_one_trb(dep, req->request.dma, 1009 req->request.length, DWC3_TRBCTL_CONTROL_DATA, 1010 false); 1011 1012 req->trb = &dwc->ep0_trb[dep->trb_enqueue]; 1013 1014 ret = dwc3_ep0_start_trans(dep); 1015 } 1016 1017 WARN_ON(ret < 0); 1018 } 1019 1020 static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) 1021 { 1022 struct dwc3 *dwc = dep->dwc; 1023 u32 type; 1024 1025 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 1026 : DWC3_TRBCTL_CONTROL_STATUS2; 1027 1028 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false); 1029 return dwc3_ep0_start_trans(dep); 1030 } 1031 1032 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) 1033 { 1034 WARN_ON(dwc3_ep0_start_control_status(dep)); 1035 } 1036 1037 static void dwc3_ep0_do_control_status(struct dwc3 *dwc, 1038 const struct dwc3_event_depevt *event) 1039 { 1040 struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; 1041 1042 __dwc3_ep0_do_control_status(dwc, dep); 1043 } 1044 1045 static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) 1046 { 1047 struct dwc3_gadget_ep_cmd_params params; 1048 u32 cmd; 1049 int ret; 1050 1051 if (!dep->resource_index) 1052 return; 1053 1054 cmd = DWC3_DEPCMD_ENDTRANSFER; 1055 cmd |= DWC3_DEPCMD_CMDIOC; 1056 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); 1057 memset(¶ms, 0, sizeof(params)); 1058 ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); 1059 WARN_ON_ONCE(ret); 1060 dep->resource_index = 0; 1061 } 1062 1063 static void dwc3_ep0_xfernotready(struct dwc3 *dwc, 1064 const struct dwc3_event_depevt *event) 1065 { 1066 switch (event->status) { 1067 case DEPEVT_STATUS_CONTROL_DATA: 1068 /* 1069 * We already have a DATA transfer in the controller's cache, 1070 * if we receive a XferNotReady(DATA) we will ignore it, unless 1071 * it's for the wrong direction. 1072 * 1073 * In that case, we must issue END_TRANSFER command to the Data 1074 * Phase we already have started and issue SetStall on the 1075 * control endpoint. 1076 */ 1077 if (dwc->ep0_expect_in != event->endpoint_number) { 1078 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in]; 1079 1080 dev_err(dwc->dev, "unexpected direction for Data Phase\n"); 1081 dwc3_ep0_end_control_data(dwc, dep); 1082 dwc3_ep0_stall_and_restart(dwc); 1083 return; 1084 } 1085 1086 break; 1087 1088 case DEPEVT_STATUS_CONTROL_STATUS: 1089 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) 1090 return; 1091 1092 dwc->ep0state = EP0_STATUS_PHASE; 1093 1094 if (dwc->delayed_status) { 1095 struct dwc3_ep *dep = dwc->eps[0]; 1096 1097 WARN_ON_ONCE(event->endpoint_number != 1); 1098 /* 1099 * We should handle the delay STATUS phase here if the 1100 * request for handling delay STATUS has been queued 1101 * into the list. 1102 */ 1103 if (!list_empty(&dep->pending_list)) { 1104 dwc->delayed_status = false; 1105 usb_gadget_set_state(&dwc->gadget, 1106 USB_STATE_CONFIGURED); 1107 dwc3_ep0_do_control_status(dwc, event); 1108 } 1109 1110 return; 1111 } 1112 1113 dwc3_ep0_do_control_status(dwc, event); 1114 } 1115 } 1116 1117 void dwc3_ep0_interrupt(struct dwc3 *dwc, 1118 const struct dwc3_event_depevt *event) 1119 { 1120 struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; 1121 u8 cmd; 1122 1123 switch (event->endpoint_event) { 1124 case DWC3_DEPEVT_XFERCOMPLETE: 1125 dwc3_ep0_xfer_complete(dwc, event); 1126 break; 1127 1128 case DWC3_DEPEVT_XFERNOTREADY: 1129 dwc3_ep0_xfernotready(dwc, event); 1130 break; 1131 1132 case DWC3_DEPEVT_XFERINPROGRESS: 1133 case DWC3_DEPEVT_RXTXFIFOEVT: 1134 case DWC3_DEPEVT_STREAMEVT: 1135 break; 1136 case DWC3_DEPEVT_EPCMDCMPLT: 1137 cmd = DEPEVT_PARAMETER_CMD(event->parameters); 1138 1139 if (cmd == DWC3_DEPCMD_ENDTRANSFER) { 1140 dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; 1141 dep->flags &= ~DWC3_EP_TRANSFER_STARTED; 1142 } 1143 break; 1144 } 1145 } 1146