xref: /openbmc/linux/drivers/usb/dwc3/dwc3-qcom.c (revision e3d786a3)
1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2018, The Linux Foundation. All rights reserved.
3  *
4  * Inspired by dwc3-of-simple.c
5  */
6 
7 #include <linux/io.h>
8 #include <linux/of.h>
9 #include <linux/clk.h>
10 #include <linux/irq.h>
11 #include <linux/clk-provider.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/extcon.h>
15 #include <linux/of_platform.h>
16 #include <linux/platform_device.h>
17 #include <linux/phy/phy.h>
18 #include <linux/usb/of.h>
19 #include <linux/reset.h>
20 #include <linux/iopoll.h>
21 
22 #include "core.h"
23 
24 /* USB QSCRATCH Hardware registers */
25 #define QSCRATCH_HS_PHY_CTRL			0x10
26 #define UTMI_OTG_VBUS_VALID			BIT(20)
27 #define SW_SESSVLD_SEL				BIT(28)
28 
29 #define QSCRATCH_SS_PHY_CTRL			0x30
30 #define LANE0_PWR_PRESENT			BIT(24)
31 
32 #define QSCRATCH_GENERAL_CFG			0x08
33 #define PIPE_UTMI_CLK_SEL			BIT(0)
34 #define PIPE3_PHYSTATUS_SW			BIT(3)
35 #define PIPE_UTMI_CLK_DIS			BIT(8)
36 
37 #define PWR_EVNT_IRQ_STAT_REG			0x58
38 #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
39 #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
40 
41 struct dwc3_qcom {
42 	struct device		*dev;
43 	void __iomem		*qscratch_base;
44 	struct platform_device	*dwc3;
45 	struct clk		**clks;
46 	int			num_clocks;
47 	struct reset_control	*resets;
48 
49 	int			hs_phy_irq;
50 	int			dp_hs_phy_irq;
51 	int			dm_hs_phy_irq;
52 	int			ss_phy_irq;
53 
54 	struct extcon_dev	*edev;
55 	struct extcon_dev	*host_edev;
56 	struct notifier_block	vbus_nb;
57 	struct notifier_block	host_nb;
58 
59 	enum usb_dr_mode	mode;
60 	bool			is_suspended;
61 	bool			pm_suspended;
62 };
63 
64 static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
65 {
66 	u32 reg;
67 
68 	reg = readl(base + offset);
69 	reg |= val;
70 	writel(reg, base + offset);
71 
72 	/* ensure that above write is through */
73 	readl(base + offset);
74 }
75 
76 static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
77 {
78 	u32 reg;
79 
80 	reg = readl(base + offset);
81 	reg &= ~val;
82 	writel(reg, base + offset);
83 
84 	/* ensure that above write is through */
85 	readl(base + offset);
86 }
87 
88 static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable)
89 {
90 	if (enable) {
91 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
92 				  LANE0_PWR_PRESENT);
93 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
94 				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
95 	} else {
96 		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
97 				  LANE0_PWR_PRESENT);
98 		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
99 				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
100 	}
101 }
102 
103 static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
104 				   unsigned long event, void *ptr)
105 {
106 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
107 
108 	/* enable vbus override for device mode */
109 	dwc3_qcom_vbus_overrride_enable(qcom, event);
110 	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
111 
112 	return NOTIFY_DONE;
113 }
114 
115 static int dwc3_qcom_host_notifier(struct notifier_block *nb,
116 				   unsigned long event, void *ptr)
117 {
118 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
119 
120 	/* disable vbus override in host mode */
121 	dwc3_qcom_vbus_overrride_enable(qcom, !event);
122 	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
123 
124 	return NOTIFY_DONE;
125 }
126 
127 static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
128 {
129 	struct device		*dev = qcom->dev;
130 	struct extcon_dev	*host_edev;
131 	int			ret;
132 
133 	if (!of_property_read_bool(dev->of_node, "extcon"))
134 		return 0;
135 
136 	qcom->edev = extcon_get_edev_by_phandle(dev, 0);
137 	if (IS_ERR(qcom->edev))
138 		return PTR_ERR(qcom->edev);
139 
140 	qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
141 
142 	qcom->host_edev = extcon_get_edev_by_phandle(dev, 1);
143 	if (IS_ERR(qcom->host_edev))
144 		qcom->host_edev = NULL;
145 
146 	ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB,
147 					    &qcom->vbus_nb);
148 	if (ret < 0) {
149 		dev_err(dev, "VBUS notifier register failed\n");
150 		return ret;
151 	}
152 
153 	if (qcom->host_edev)
154 		host_edev = qcom->host_edev;
155 	else
156 		host_edev = qcom->edev;
157 
158 	qcom->host_nb.notifier_call = dwc3_qcom_host_notifier;
159 	ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST,
160 					    &qcom->host_nb);
161 	if (ret < 0) {
162 		dev_err(dev, "Host notifier register failed\n");
163 		return ret;
164 	}
165 
166 	/* Update initial VBUS override based on extcon state */
167 	if (extcon_get_state(qcom->edev, EXTCON_USB) ||
168 	    !extcon_get_state(host_edev, EXTCON_USB_HOST))
169 		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev);
170 	else
171 		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev);
172 
173 	return 0;
174 }
175 
176 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
177 {
178 	if (qcom->hs_phy_irq) {
179 		disable_irq_wake(qcom->hs_phy_irq);
180 		disable_irq_nosync(qcom->hs_phy_irq);
181 	}
182 
183 	if (qcom->dp_hs_phy_irq) {
184 		disable_irq_wake(qcom->dp_hs_phy_irq);
185 		disable_irq_nosync(qcom->dp_hs_phy_irq);
186 	}
187 
188 	if (qcom->dm_hs_phy_irq) {
189 		disable_irq_wake(qcom->dm_hs_phy_irq);
190 		disable_irq_nosync(qcom->dm_hs_phy_irq);
191 	}
192 
193 	if (qcom->ss_phy_irq) {
194 		disable_irq_wake(qcom->ss_phy_irq);
195 		disable_irq_nosync(qcom->ss_phy_irq);
196 	}
197 }
198 
199 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
200 {
201 	if (qcom->hs_phy_irq) {
202 		enable_irq(qcom->hs_phy_irq);
203 		enable_irq_wake(qcom->hs_phy_irq);
204 	}
205 
206 	if (qcom->dp_hs_phy_irq) {
207 		enable_irq(qcom->dp_hs_phy_irq);
208 		enable_irq_wake(qcom->dp_hs_phy_irq);
209 	}
210 
211 	if (qcom->dm_hs_phy_irq) {
212 		enable_irq(qcom->dm_hs_phy_irq);
213 		enable_irq_wake(qcom->dm_hs_phy_irq);
214 	}
215 
216 	if (qcom->ss_phy_irq) {
217 		enable_irq(qcom->ss_phy_irq);
218 		enable_irq_wake(qcom->ss_phy_irq);
219 	}
220 }
221 
222 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
223 {
224 	u32 val;
225 	int i;
226 
227 	if (qcom->is_suspended)
228 		return 0;
229 
230 	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
231 	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
232 		dev_err(qcom->dev, "HS-PHY not in L2\n");
233 
234 	for (i = qcom->num_clocks - 1; i >= 0; i--)
235 		clk_disable_unprepare(qcom->clks[i]);
236 
237 	qcom->is_suspended = true;
238 	dwc3_qcom_enable_interrupts(qcom);
239 
240 	return 0;
241 }
242 
243 static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
244 {
245 	int ret;
246 	int i;
247 
248 	if (!qcom->is_suspended)
249 		return 0;
250 
251 	dwc3_qcom_disable_interrupts(qcom);
252 
253 	for (i = 0; i < qcom->num_clocks; i++) {
254 		ret = clk_prepare_enable(qcom->clks[i]);
255 		if (ret < 0) {
256 			while (--i >= 0)
257 				clk_disable_unprepare(qcom->clks[i]);
258 			return ret;
259 		}
260 	}
261 
262 	/* Clear existing events from PHY related to L2 in/out */
263 	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
264 			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
265 
266 	qcom->is_suspended = false;
267 
268 	return 0;
269 }
270 
271 static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
272 {
273 	struct dwc3_qcom *qcom = data;
274 	struct dwc3	*dwc = platform_get_drvdata(qcom->dwc3);
275 
276 	/* If pm_suspended then let pm_resume take care of resuming h/w */
277 	if (qcom->pm_suspended)
278 		return IRQ_HANDLED;
279 
280 	if (dwc->xhci)
281 		pm_runtime_resume(&dwc->xhci->dev);
282 
283 	return IRQ_HANDLED;
284 }
285 
286 static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
287 {
288 	/* Configure dwc3 to use UTMI clock as PIPE clock not present */
289 	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
290 			  PIPE_UTMI_CLK_DIS);
291 
292 	usleep_range(100, 1000);
293 
294 	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
295 			  PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
296 
297 	usleep_range(100, 1000);
298 
299 	dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
300 			  PIPE_UTMI_CLK_DIS);
301 }
302 
303 static int dwc3_qcom_setup_irq(struct platform_device *pdev)
304 {
305 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
306 	int irq, ret;
307 
308 	irq = platform_get_irq_byname(pdev, "hs_phy_irq");
309 	if (irq > 0) {
310 		/* Keep wakeup interrupts disabled until suspend */
311 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
312 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
313 					qcom_dwc3_resume_irq,
314 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
315 					"qcom_dwc3 HS", qcom);
316 		if (ret) {
317 			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
318 			return ret;
319 		}
320 		qcom->hs_phy_irq = irq;
321 	}
322 
323 	irq = platform_get_irq_byname(pdev, "dp_hs_phy_irq");
324 	if (irq > 0) {
325 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
326 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
327 					qcom_dwc3_resume_irq,
328 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
329 					"qcom_dwc3 DP_HS", qcom);
330 		if (ret) {
331 			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
332 			return ret;
333 		}
334 		qcom->dp_hs_phy_irq = irq;
335 	}
336 
337 	irq = platform_get_irq_byname(pdev, "dm_hs_phy_irq");
338 	if (irq > 0) {
339 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
340 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
341 					qcom_dwc3_resume_irq,
342 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
343 					"qcom_dwc3 DM_HS", qcom);
344 		if (ret) {
345 			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
346 			return ret;
347 		}
348 		qcom->dm_hs_phy_irq = irq;
349 	}
350 
351 	irq = platform_get_irq_byname(pdev, "ss_phy_irq");
352 	if (irq > 0) {
353 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
354 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
355 					qcom_dwc3_resume_irq,
356 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
357 					"qcom_dwc3 SS", qcom);
358 		if (ret) {
359 			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
360 			return ret;
361 		}
362 		qcom->ss_phy_irq = irq;
363 	}
364 
365 	return 0;
366 }
367 
368 static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
369 {
370 	struct device		*dev = qcom->dev;
371 	struct device_node	*np = dev->of_node;
372 	int			i;
373 
374 	qcom->num_clocks = count;
375 
376 	if (!count)
377 		return 0;
378 
379 	qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
380 				  sizeof(struct clk *), GFP_KERNEL);
381 	if (!qcom->clks)
382 		return -ENOMEM;
383 
384 	for (i = 0; i < qcom->num_clocks; i++) {
385 		struct clk	*clk;
386 		int		ret;
387 
388 		clk = of_clk_get(np, i);
389 		if (IS_ERR(clk)) {
390 			while (--i >= 0)
391 				clk_put(qcom->clks[i]);
392 			return PTR_ERR(clk);
393 		}
394 
395 		ret = clk_prepare_enable(clk);
396 		if (ret < 0) {
397 			while (--i >= 0) {
398 				clk_disable_unprepare(qcom->clks[i]);
399 				clk_put(qcom->clks[i]);
400 			}
401 			clk_put(clk);
402 
403 			return ret;
404 		}
405 
406 		qcom->clks[i] = clk;
407 	}
408 
409 	return 0;
410 }
411 
412 static int dwc3_qcom_probe(struct platform_device *pdev)
413 {
414 	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
415 	struct device		*dev = &pdev->dev;
416 	struct dwc3_qcom	*qcom;
417 	struct resource		*res;
418 	int			ret, i;
419 	bool			ignore_pipe_clk;
420 
421 	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
422 	if (!qcom)
423 		return -ENOMEM;
424 
425 	platform_set_drvdata(pdev, qcom);
426 	qcom->dev = &pdev->dev;
427 
428 	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
429 	if (IS_ERR(qcom->resets)) {
430 		ret = PTR_ERR(qcom->resets);
431 		dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret);
432 		return ret;
433 	}
434 
435 	ret = reset_control_assert(qcom->resets);
436 	if (ret) {
437 		dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret);
438 		return ret;
439 	}
440 
441 	usleep_range(10, 1000);
442 
443 	ret = reset_control_deassert(qcom->resets);
444 	if (ret) {
445 		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
446 		goto reset_assert;
447 	}
448 
449 	ret = dwc3_qcom_clk_init(qcom, of_count_phandle_with_args(np,
450 						"clocks", "#clock-cells"));
451 	if (ret) {
452 		dev_err(dev, "failed to get clocks\n");
453 		goto reset_assert;
454 	}
455 
456 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
457 	qcom->qscratch_base = devm_ioremap_resource(dev, res);
458 	if (IS_ERR(qcom->qscratch_base)) {
459 		dev_err(dev, "failed to map qscratch, err=%d\n", ret);
460 		ret = PTR_ERR(qcom->qscratch_base);
461 		goto clk_disable;
462 	}
463 
464 	ret = dwc3_qcom_setup_irq(pdev);
465 	if (ret)
466 		goto clk_disable;
467 
468 	dwc3_np = of_get_child_by_name(np, "dwc3");
469 	if (!dwc3_np) {
470 		dev_err(dev, "failed to find dwc3 core child\n");
471 		ret = -ENODEV;
472 		goto clk_disable;
473 	}
474 
475 	/*
476 	 * Disable pipe_clk requirement if specified. Used when dwc3
477 	 * operates without SSPHY and only HS/FS/LS modes are supported.
478 	 */
479 	ignore_pipe_clk = device_property_read_bool(dev,
480 				"qcom,select-utmi-as-pipe-clk");
481 	if (ignore_pipe_clk)
482 		dwc3_qcom_select_utmi_clk(qcom);
483 
484 	ret = of_platform_populate(np, NULL, NULL, dev);
485 	if (ret) {
486 		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
487 		goto clk_disable;
488 	}
489 
490 	qcom->dwc3 = of_find_device_by_node(dwc3_np);
491 	if (!qcom->dwc3) {
492 		dev_err(&pdev->dev, "failed to get dwc3 platform device\n");
493 		ret = -ENODEV;
494 		goto depopulate;
495 	}
496 
497 	qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
498 
499 	/* enable vbus override for device mode */
500 	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
501 		dwc3_qcom_vbus_overrride_enable(qcom, true);
502 
503 	/* register extcon to override sw_vbus on Vbus change later */
504 	ret = dwc3_qcom_register_extcon(qcom);
505 	if (ret)
506 		goto depopulate;
507 
508 	device_init_wakeup(&pdev->dev, 1);
509 	qcom->is_suspended = false;
510 	pm_runtime_set_active(dev);
511 	pm_runtime_enable(dev);
512 	pm_runtime_forbid(dev);
513 
514 	return 0;
515 
516 depopulate:
517 	of_platform_depopulate(&pdev->dev);
518 clk_disable:
519 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
520 		clk_disable_unprepare(qcom->clks[i]);
521 		clk_put(qcom->clks[i]);
522 	}
523 reset_assert:
524 	reset_control_assert(qcom->resets);
525 
526 	return ret;
527 }
528 
529 static int dwc3_qcom_remove(struct platform_device *pdev)
530 {
531 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
532 	struct device *dev = &pdev->dev;
533 	int i;
534 
535 	of_platform_depopulate(dev);
536 
537 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
538 		clk_disable_unprepare(qcom->clks[i]);
539 		clk_put(qcom->clks[i]);
540 	}
541 	qcom->num_clocks = 0;
542 
543 	reset_control_assert(qcom->resets);
544 
545 	pm_runtime_allow(dev);
546 	pm_runtime_disable(dev);
547 
548 	return 0;
549 }
550 
551 static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
552 {
553 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
554 	int ret = 0;
555 
556 	ret = dwc3_qcom_suspend(qcom);
557 	if (!ret)
558 		qcom->pm_suspended = true;
559 
560 	return ret;
561 }
562 
563 static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
564 {
565 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
566 	int ret;
567 
568 	ret = dwc3_qcom_resume(qcom);
569 	if (!ret)
570 		qcom->pm_suspended = false;
571 
572 	return ret;
573 }
574 
575 static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
576 {
577 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
578 
579 	return dwc3_qcom_suspend(qcom);
580 }
581 
582 static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
583 {
584 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
585 
586 	return dwc3_qcom_resume(qcom);
587 }
588 
589 static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
590 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
591 	SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
592 			   NULL)
593 };
594 
595 static const struct of_device_id dwc3_qcom_of_match[] = {
596 	{ .compatible = "qcom,dwc3" },
597 	{ .compatible = "qcom,msm8996-dwc3" },
598 	{ .compatible = "qcom,sdm845-dwc3" },
599 	{ }
600 };
601 MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
602 
603 static struct platform_driver dwc3_qcom_driver = {
604 	.probe		= dwc3_qcom_probe,
605 	.remove		= dwc3_qcom_remove,
606 	.driver		= {
607 		.name	= "dwc3-qcom",
608 		.pm	= &dwc3_qcom_dev_pm_ops,
609 		.of_match_table	= dwc3_qcom_of_match,
610 	},
611 };
612 
613 module_platform_driver(dwc3_qcom_driver);
614 
615 MODULE_LICENSE("GPL v2");
616 MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver");
617