xref: /openbmc/linux/drivers/usb/dwc3/dwc3-qcom.c (revision a9d85efb)
1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2018, The Linux Foundation. All rights reserved.
3  *
4  * Inspired by dwc3-of-simple.c
5  */
6 
7 #include <linux/acpi.h>
8 #include <linux/io.h>
9 #include <linux/of.h>
10 #include <linux/clk.h>
11 #include <linux/irq.h>
12 #include <linux/of_clk.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/extcon.h>
16 #include <linux/interconnect.h>
17 #include <linux/of_platform.h>
18 #include <linux/platform_device.h>
19 #include <linux/phy/phy.h>
20 #include <linux/usb/of.h>
21 #include <linux/reset.h>
22 #include <linux/iopoll.h>
23 
24 #include "core.h"
25 
26 /* USB QSCRATCH Hardware registers */
27 #define QSCRATCH_HS_PHY_CTRL			0x10
28 #define UTMI_OTG_VBUS_VALID			BIT(20)
29 #define SW_SESSVLD_SEL				BIT(28)
30 
31 #define QSCRATCH_SS_PHY_CTRL			0x30
32 #define LANE0_PWR_PRESENT			BIT(24)
33 
34 #define QSCRATCH_GENERAL_CFG			0x08
35 #define PIPE_UTMI_CLK_SEL			BIT(0)
36 #define PIPE3_PHYSTATUS_SW			BIT(3)
37 #define PIPE_UTMI_CLK_DIS			BIT(8)
38 
39 #define PWR_EVNT_IRQ_STAT_REG			0x58
40 #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
41 #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
42 
43 #define SDM845_QSCRATCH_BASE_OFFSET		0xf8800
44 #define SDM845_QSCRATCH_SIZE			0x400
45 #define SDM845_DWC3_CORE_SIZE			0xcd00
46 
47 /* Interconnect path bandwidths in MBps */
48 #define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
49 #define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
50 #define USB_MEMORY_AVG_SS_BW  MBps_to_icc(1000)
51 #define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
52 #define APPS_USB_AVG_BW 0
53 #define APPS_USB_PEAK_BW MBps_to_icc(40)
54 
55 struct dwc3_acpi_pdata {
56 	u32			qscratch_base_offset;
57 	u32			qscratch_base_size;
58 	u32			dwc3_core_base_size;
59 	int			hs_phy_irq_index;
60 	int			dp_hs_phy_irq_index;
61 	int			dm_hs_phy_irq_index;
62 	int			ss_phy_irq_index;
63 	bool			is_urs;
64 };
65 
66 struct dwc3_qcom {
67 	struct device		*dev;
68 	void __iomem		*qscratch_base;
69 	struct platform_device	*dwc3;
70 	struct platform_device	*urs_usb;
71 	struct clk		**clks;
72 	int			num_clocks;
73 	struct reset_control	*resets;
74 
75 	int			hs_phy_irq;
76 	int			dp_hs_phy_irq;
77 	int			dm_hs_phy_irq;
78 	int			ss_phy_irq;
79 
80 	struct extcon_dev	*edev;
81 	struct extcon_dev	*host_edev;
82 	struct notifier_block	vbus_nb;
83 	struct notifier_block	host_nb;
84 
85 	const struct dwc3_acpi_pdata *acpi_pdata;
86 
87 	enum usb_dr_mode	mode;
88 	bool			is_suspended;
89 	bool			pm_suspended;
90 	struct icc_path		*icc_path_ddr;
91 	struct icc_path		*icc_path_apps;
92 };
93 
94 static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
95 {
96 	u32 reg;
97 
98 	reg = readl(base + offset);
99 	reg |= val;
100 	writel(reg, base + offset);
101 
102 	/* ensure that above write is through */
103 	readl(base + offset);
104 }
105 
106 static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
107 {
108 	u32 reg;
109 
110 	reg = readl(base + offset);
111 	reg &= ~val;
112 	writel(reg, base + offset);
113 
114 	/* ensure that above write is through */
115 	readl(base + offset);
116 }
117 
118 static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
119 {
120 	if (enable) {
121 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
122 				  LANE0_PWR_PRESENT);
123 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
124 				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
125 	} else {
126 		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
127 				  LANE0_PWR_PRESENT);
128 		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
129 				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
130 	}
131 }
132 
133 static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
134 				   unsigned long event, void *ptr)
135 {
136 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
137 
138 	/* enable vbus override for device mode */
139 	dwc3_qcom_vbus_override_enable(qcom, event);
140 	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
141 
142 	return NOTIFY_DONE;
143 }
144 
145 static int dwc3_qcom_host_notifier(struct notifier_block *nb,
146 				   unsigned long event, void *ptr)
147 {
148 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
149 
150 	/* disable vbus override in host mode */
151 	dwc3_qcom_vbus_override_enable(qcom, !event);
152 	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
153 
154 	return NOTIFY_DONE;
155 }
156 
157 static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
158 {
159 	struct device		*dev = qcom->dev;
160 	struct extcon_dev	*host_edev;
161 	int			ret;
162 
163 	if (!of_property_read_bool(dev->of_node, "extcon"))
164 		return 0;
165 
166 	qcom->edev = extcon_get_edev_by_phandle(dev, 0);
167 	if (IS_ERR(qcom->edev))
168 		return PTR_ERR(qcom->edev);
169 
170 	qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
171 
172 	qcom->host_edev = extcon_get_edev_by_phandle(dev, 1);
173 	if (IS_ERR(qcom->host_edev))
174 		qcom->host_edev = NULL;
175 
176 	ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB,
177 					    &qcom->vbus_nb);
178 	if (ret < 0) {
179 		dev_err(dev, "VBUS notifier register failed\n");
180 		return ret;
181 	}
182 
183 	if (qcom->host_edev)
184 		host_edev = qcom->host_edev;
185 	else
186 		host_edev = qcom->edev;
187 
188 	qcom->host_nb.notifier_call = dwc3_qcom_host_notifier;
189 	ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST,
190 					    &qcom->host_nb);
191 	if (ret < 0) {
192 		dev_err(dev, "Host notifier register failed\n");
193 		return ret;
194 	}
195 
196 	/* Update initial VBUS override based on extcon state */
197 	if (extcon_get_state(qcom->edev, EXTCON_USB) ||
198 	    !extcon_get_state(host_edev, EXTCON_USB_HOST))
199 		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev);
200 	else
201 		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev);
202 
203 	return 0;
204 }
205 
206 static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
207 {
208 	int ret;
209 
210 	ret = icc_enable(qcom->icc_path_ddr);
211 	if (ret)
212 		return ret;
213 
214 	ret = icc_enable(qcom->icc_path_apps);
215 	if (ret)
216 		icc_disable(qcom->icc_path_ddr);
217 
218 	return ret;
219 }
220 
221 static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
222 {
223 	int ret;
224 
225 	ret = icc_disable(qcom->icc_path_ddr);
226 	if (ret)
227 		return ret;
228 
229 	ret = icc_disable(qcom->icc_path_apps);
230 	if (ret)
231 		icc_enable(qcom->icc_path_ddr);
232 
233 	return ret;
234 }
235 
236 /**
237  * dwc3_qcom_interconnect_init() - Get interconnect path handles
238  * and set bandwidth.
239  * @qcom:			Pointer to the concerned usb core.
240  *
241  */
242 static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
243 {
244 	struct device *dev = qcom->dev;
245 	int ret;
246 
247 	if (has_acpi_companion(dev))
248 		return 0;
249 
250 	qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
251 	if (IS_ERR(qcom->icc_path_ddr)) {
252 		dev_err(dev, "failed to get usb-ddr path: %ld\n",
253 			PTR_ERR(qcom->icc_path_ddr));
254 		return PTR_ERR(qcom->icc_path_ddr);
255 	}
256 
257 	qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
258 	if (IS_ERR(qcom->icc_path_apps)) {
259 		dev_err(dev, "failed to get apps-usb path: %ld\n",
260 				PTR_ERR(qcom->icc_path_apps));
261 		return PTR_ERR(qcom->icc_path_apps);
262 	}
263 
264 	if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
265 			usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
266 		ret = icc_set_bw(qcom->icc_path_ddr,
267 			USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
268 	else
269 		ret = icc_set_bw(qcom->icc_path_ddr,
270 			USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
271 
272 	if (ret) {
273 		dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
274 		return ret;
275 	}
276 
277 	ret = icc_set_bw(qcom->icc_path_apps,
278 		APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
279 	if (ret) {
280 		dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
281 		return ret;
282 	}
283 
284 	return 0;
285 }
286 
287 /**
288  * dwc3_qcom_interconnect_exit() - Release interconnect path handles
289  * @qcom:			Pointer to the concerned usb core.
290  *
291  * This function is used to release interconnect path handle.
292  */
293 static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
294 {
295 	icc_put(qcom->icc_path_ddr);
296 	icc_put(qcom->icc_path_apps);
297 }
298 
299 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
300 {
301 	if (qcom->hs_phy_irq) {
302 		disable_irq_wake(qcom->hs_phy_irq);
303 		disable_irq_nosync(qcom->hs_phy_irq);
304 	}
305 
306 	if (qcom->dp_hs_phy_irq) {
307 		disable_irq_wake(qcom->dp_hs_phy_irq);
308 		disable_irq_nosync(qcom->dp_hs_phy_irq);
309 	}
310 
311 	if (qcom->dm_hs_phy_irq) {
312 		disable_irq_wake(qcom->dm_hs_phy_irq);
313 		disable_irq_nosync(qcom->dm_hs_phy_irq);
314 	}
315 
316 	if (qcom->ss_phy_irq) {
317 		disable_irq_wake(qcom->ss_phy_irq);
318 		disable_irq_nosync(qcom->ss_phy_irq);
319 	}
320 }
321 
322 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
323 {
324 	if (qcom->hs_phy_irq) {
325 		enable_irq(qcom->hs_phy_irq);
326 		enable_irq_wake(qcom->hs_phy_irq);
327 	}
328 
329 	if (qcom->dp_hs_phy_irq) {
330 		enable_irq(qcom->dp_hs_phy_irq);
331 		enable_irq_wake(qcom->dp_hs_phy_irq);
332 	}
333 
334 	if (qcom->dm_hs_phy_irq) {
335 		enable_irq(qcom->dm_hs_phy_irq);
336 		enable_irq_wake(qcom->dm_hs_phy_irq);
337 	}
338 
339 	if (qcom->ss_phy_irq) {
340 		enable_irq(qcom->ss_phy_irq);
341 		enable_irq_wake(qcom->ss_phy_irq);
342 	}
343 }
344 
345 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
346 {
347 	u32 val;
348 	int i, ret;
349 
350 	if (qcom->is_suspended)
351 		return 0;
352 
353 	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
354 	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
355 		dev_err(qcom->dev, "HS-PHY not in L2\n");
356 
357 	for (i = qcom->num_clocks - 1; i >= 0; i--)
358 		clk_disable_unprepare(qcom->clks[i]);
359 
360 	ret = dwc3_qcom_interconnect_disable(qcom);
361 	if (ret)
362 		dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
363 
364 	if (device_may_wakeup(qcom->dev))
365 		dwc3_qcom_enable_interrupts(qcom);
366 
367 	qcom->is_suspended = true;
368 
369 	return 0;
370 }
371 
372 static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
373 {
374 	int ret;
375 	int i;
376 
377 	if (!qcom->is_suspended)
378 		return 0;
379 
380 	if (device_may_wakeup(qcom->dev))
381 		dwc3_qcom_disable_interrupts(qcom);
382 
383 	for (i = 0; i < qcom->num_clocks; i++) {
384 		ret = clk_prepare_enable(qcom->clks[i]);
385 		if (ret < 0) {
386 			while (--i >= 0)
387 				clk_disable_unprepare(qcom->clks[i]);
388 			return ret;
389 		}
390 	}
391 
392 	ret = dwc3_qcom_interconnect_enable(qcom);
393 	if (ret)
394 		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
395 
396 	/* Clear existing events from PHY related to L2 in/out */
397 	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
398 			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
399 
400 	qcom->is_suspended = false;
401 
402 	return 0;
403 }
404 
405 static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
406 {
407 	struct dwc3_qcom *qcom = data;
408 	struct dwc3	*dwc = platform_get_drvdata(qcom->dwc3);
409 
410 	/* If pm_suspended then let pm_resume take care of resuming h/w */
411 	if (qcom->pm_suspended)
412 		return IRQ_HANDLED;
413 
414 	if (dwc->xhci)
415 		pm_runtime_resume(&dwc->xhci->dev);
416 
417 	return IRQ_HANDLED;
418 }
419 
420 static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
421 {
422 	/* Configure dwc3 to use UTMI clock as PIPE clock not present */
423 	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
424 			  PIPE_UTMI_CLK_DIS);
425 
426 	usleep_range(100, 1000);
427 
428 	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
429 			  PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
430 
431 	usleep_range(100, 1000);
432 
433 	dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
434 			  PIPE_UTMI_CLK_DIS);
435 }
436 
437 static int dwc3_qcom_get_irq(struct platform_device *pdev,
438 			     const char *name, int num)
439 {
440 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
441 	struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
442 	struct device_node *np = pdev->dev.of_node;
443 	int ret;
444 
445 	if (np)
446 		ret = platform_get_irq_byname(pdev_irq, name);
447 	else
448 		ret = platform_get_irq(pdev_irq, num);
449 
450 	return ret;
451 }
452 
453 static int dwc3_qcom_setup_irq(struct platform_device *pdev)
454 {
455 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
456 	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
457 	int irq;
458 	int ret;
459 
460 	irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
461 				pdata ? pdata->hs_phy_irq_index : -1);
462 	if (irq > 0) {
463 		/* Keep wakeup interrupts disabled until suspend */
464 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
465 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
466 					qcom_dwc3_resume_irq,
467 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
468 					"qcom_dwc3 HS", qcom);
469 		if (ret) {
470 			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
471 			return ret;
472 		}
473 		qcom->hs_phy_irq = irq;
474 	}
475 
476 	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
477 				pdata ? pdata->dp_hs_phy_irq_index : -1);
478 	if (irq > 0) {
479 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
480 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
481 					qcom_dwc3_resume_irq,
482 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
483 					"qcom_dwc3 DP_HS", qcom);
484 		if (ret) {
485 			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
486 			return ret;
487 		}
488 		qcom->dp_hs_phy_irq = irq;
489 	}
490 
491 	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
492 				pdata ? pdata->dm_hs_phy_irq_index : -1);
493 	if (irq > 0) {
494 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
495 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
496 					qcom_dwc3_resume_irq,
497 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
498 					"qcom_dwc3 DM_HS", qcom);
499 		if (ret) {
500 			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
501 			return ret;
502 		}
503 		qcom->dm_hs_phy_irq = irq;
504 	}
505 
506 	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
507 				pdata ? pdata->ss_phy_irq_index : -1);
508 	if (irq > 0) {
509 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
510 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
511 					qcom_dwc3_resume_irq,
512 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
513 					"qcom_dwc3 SS", qcom);
514 		if (ret) {
515 			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
516 			return ret;
517 		}
518 		qcom->ss_phy_irq = irq;
519 	}
520 
521 	return 0;
522 }
523 
524 static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
525 {
526 	struct device		*dev = qcom->dev;
527 	struct device_node	*np = dev->of_node;
528 	int			i;
529 
530 	if (!np || !count)
531 		return 0;
532 
533 	if (count < 0)
534 		return count;
535 
536 	qcom->num_clocks = count;
537 
538 	qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
539 				  sizeof(struct clk *), GFP_KERNEL);
540 	if (!qcom->clks)
541 		return -ENOMEM;
542 
543 	for (i = 0; i < qcom->num_clocks; i++) {
544 		struct clk	*clk;
545 		int		ret;
546 
547 		clk = of_clk_get(np, i);
548 		if (IS_ERR(clk)) {
549 			while (--i >= 0)
550 				clk_put(qcom->clks[i]);
551 			return PTR_ERR(clk);
552 		}
553 
554 		ret = clk_prepare_enable(clk);
555 		if (ret < 0) {
556 			while (--i >= 0) {
557 				clk_disable_unprepare(qcom->clks[i]);
558 				clk_put(qcom->clks[i]);
559 			}
560 			clk_put(clk);
561 
562 			return ret;
563 		}
564 
565 		qcom->clks[i] = clk;
566 	}
567 
568 	return 0;
569 }
570 
571 static const struct property_entry dwc3_qcom_acpi_properties[] = {
572 	PROPERTY_ENTRY_STRING("dr_mode", "host"),
573 	{}
574 };
575 
576 static const struct software_node dwc3_qcom_swnode = {
577 	.properties = dwc3_qcom_acpi_properties,
578 };
579 
580 static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
581 {
582 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
583 	struct device		*dev = &pdev->dev;
584 	struct resource		*res, *child_res = NULL;
585 	struct platform_device	*pdev_irq = qcom->urs_usb ? qcom->urs_usb :
586 							    pdev;
587 	int			irq;
588 	int			ret;
589 
590 	qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
591 	if (!qcom->dwc3)
592 		return -ENOMEM;
593 
594 	qcom->dwc3->dev.parent = dev;
595 	qcom->dwc3->dev.type = dev->type;
596 	qcom->dwc3->dev.dma_mask = dev->dma_mask;
597 	qcom->dwc3->dev.dma_parms = dev->dma_parms;
598 	qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
599 
600 	child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
601 	if (!child_res)
602 		return -ENOMEM;
603 
604 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
605 	if (!res) {
606 		dev_err(&pdev->dev, "failed to get memory resource\n");
607 		ret = -ENODEV;
608 		goto out;
609 	}
610 
611 	child_res[0].flags = res->flags;
612 	child_res[0].start = res->start;
613 	child_res[0].end = child_res[0].start +
614 		qcom->acpi_pdata->dwc3_core_base_size;
615 
616 	irq = platform_get_irq(pdev_irq, 0);
617 	if (irq < 0) {
618 		ret = irq;
619 		goto out;
620 	}
621 	child_res[1].flags = IORESOURCE_IRQ;
622 	child_res[1].start = child_res[1].end = irq;
623 
624 	ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
625 	if (ret) {
626 		dev_err(&pdev->dev, "failed to add resources\n");
627 		goto out;
628 	}
629 
630 	ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
631 	if (ret < 0) {
632 		dev_err(&pdev->dev, "failed to add properties\n");
633 		goto out;
634 	}
635 
636 	ret = platform_device_add(qcom->dwc3);
637 	if (ret) {
638 		dev_err(&pdev->dev, "failed to add device\n");
639 		device_remove_software_node(&qcom->dwc3->dev);
640 	}
641 
642 out:
643 	kfree(child_res);
644 	return ret;
645 }
646 
647 static int dwc3_qcom_of_register_core(struct platform_device *pdev)
648 {
649 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
650 	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
651 	struct device		*dev = &pdev->dev;
652 	struct property		*prop;
653 	int			ret;
654 
655 	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
656 	if (!dwc3_np) {
657 		dev_err(dev, "failed to find dwc3 core child\n");
658 		return -ENODEV;
659 	}
660 
661 	prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
662 	if (!prop) {
663 		ret = -ENOMEM;
664 		dev_err(dev, "unable to allocate memory for property\n");
665 		goto node_put;
666 	}
667 
668 	prop->name = "tx-fifo-resize";
669 	ret = of_add_property(dwc3_np, prop);
670 	if (ret) {
671 		dev_err(dev, "unable to add property\n");
672 		goto node_put;
673 	}
674 
675 	ret = of_platform_populate(np, NULL, NULL, dev);
676 	if (ret) {
677 		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
678 		goto node_put;
679 	}
680 
681 	qcom->dwc3 = of_find_device_by_node(dwc3_np);
682 	if (!qcom->dwc3) {
683 		ret = -ENODEV;
684 		dev_err(dev, "failed to get dwc3 platform device\n");
685 	}
686 
687 node_put:
688 	of_node_put(dwc3_np);
689 
690 	return ret;
691 }
692 
693 static struct platform_device *
694 dwc3_qcom_create_urs_usb_platdev(struct device *dev)
695 {
696 	struct fwnode_handle *fwh;
697 	struct acpi_device *adev;
698 	char name[8];
699 	int ret;
700 	int id;
701 
702 	/* Figure out device id */
703 	ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
704 	if (!ret)
705 		return NULL;
706 
707 	/* Find the child using name */
708 	snprintf(name, sizeof(name), "USB%d", id);
709 	fwh = fwnode_get_named_child_node(dev->fwnode, name);
710 	if (!fwh)
711 		return NULL;
712 
713 	adev = to_acpi_device_node(fwh);
714 	if (!adev)
715 		return NULL;
716 
717 	return acpi_create_platform_device(adev, NULL);
718 }
719 
720 static int dwc3_qcom_probe(struct platform_device *pdev)
721 {
722 	struct device_node	*np = pdev->dev.of_node;
723 	struct device		*dev = &pdev->dev;
724 	struct dwc3_qcom	*qcom;
725 	struct resource		*res, *parent_res = NULL;
726 	int			ret, i;
727 	bool			ignore_pipe_clk;
728 
729 	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
730 	if (!qcom)
731 		return -ENOMEM;
732 
733 	platform_set_drvdata(pdev, qcom);
734 	qcom->dev = &pdev->dev;
735 
736 	if (has_acpi_companion(dev)) {
737 		qcom->acpi_pdata = acpi_device_get_match_data(dev);
738 		if (!qcom->acpi_pdata) {
739 			dev_err(&pdev->dev, "no supporting ACPI device data\n");
740 			return -EINVAL;
741 		}
742 	}
743 
744 	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
745 	if (IS_ERR(qcom->resets)) {
746 		ret = PTR_ERR(qcom->resets);
747 		dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret);
748 		return ret;
749 	}
750 
751 	ret = reset_control_assert(qcom->resets);
752 	if (ret) {
753 		dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret);
754 		return ret;
755 	}
756 
757 	usleep_range(10, 1000);
758 
759 	ret = reset_control_deassert(qcom->resets);
760 	if (ret) {
761 		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
762 		goto reset_assert;
763 	}
764 
765 	ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
766 	if (ret) {
767 		dev_err(dev, "failed to get clocks\n");
768 		goto reset_assert;
769 	}
770 
771 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
772 
773 	if (np) {
774 		parent_res = res;
775 	} else {
776 		parent_res = kmemdup(res, sizeof(struct resource), GFP_KERNEL);
777 		if (!parent_res)
778 			return -ENOMEM;
779 
780 		parent_res->start = res->start +
781 			qcom->acpi_pdata->qscratch_base_offset;
782 		parent_res->end = parent_res->start +
783 			qcom->acpi_pdata->qscratch_base_size;
784 
785 		if (qcom->acpi_pdata->is_urs) {
786 			qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
787 			if (!qcom->urs_usb) {
788 				dev_err(dev, "failed to create URS USB platdev\n");
789 				return -ENODEV;
790 			}
791 		}
792 	}
793 
794 	qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
795 	if (IS_ERR(qcom->qscratch_base)) {
796 		ret = PTR_ERR(qcom->qscratch_base);
797 		goto clk_disable;
798 	}
799 
800 	ret = dwc3_qcom_setup_irq(pdev);
801 	if (ret) {
802 		dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
803 		goto clk_disable;
804 	}
805 
806 	/*
807 	 * Disable pipe_clk requirement if specified. Used when dwc3
808 	 * operates without SSPHY and only HS/FS/LS modes are supported.
809 	 */
810 	ignore_pipe_clk = device_property_read_bool(dev,
811 				"qcom,select-utmi-as-pipe-clk");
812 	if (ignore_pipe_clk)
813 		dwc3_qcom_select_utmi_clk(qcom);
814 
815 	if (np)
816 		ret = dwc3_qcom_of_register_core(pdev);
817 	else
818 		ret = dwc3_qcom_acpi_register_core(pdev);
819 
820 	if (ret) {
821 		dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
822 		goto depopulate;
823 	}
824 
825 	ret = dwc3_qcom_interconnect_init(qcom);
826 	if (ret)
827 		goto depopulate;
828 
829 	qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
830 
831 	/* enable vbus override for device mode */
832 	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
833 		dwc3_qcom_vbus_override_enable(qcom, true);
834 
835 	/* register extcon to override sw_vbus on Vbus change later */
836 	ret = dwc3_qcom_register_extcon(qcom);
837 	if (ret)
838 		goto interconnect_exit;
839 
840 	device_init_wakeup(&pdev->dev, 1);
841 	qcom->is_suspended = false;
842 	pm_runtime_set_active(dev);
843 	pm_runtime_enable(dev);
844 	pm_runtime_forbid(dev);
845 
846 	return 0;
847 
848 interconnect_exit:
849 	dwc3_qcom_interconnect_exit(qcom);
850 depopulate:
851 	if (np)
852 		of_platform_depopulate(&pdev->dev);
853 	else
854 		platform_device_put(pdev);
855 clk_disable:
856 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
857 		clk_disable_unprepare(qcom->clks[i]);
858 		clk_put(qcom->clks[i]);
859 	}
860 reset_assert:
861 	reset_control_assert(qcom->resets);
862 
863 	return ret;
864 }
865 
866 static int dwc3_qcom_remove(struct platform_device *pdev)
867 {
868 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
869 	struct device *dev = &pdev->dev;
870 	int i;
871 
872 	device_remove_software_node(&qcom->dwc3->dev);
873 	of_platform_depopulate(dev);
874 
875 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
876 		clk_disable_unprepare(qcom->clks[i]);
877 		clk_put(qcom->clks[i]);
878 	}
879 	qcom->num_clocks = 0;
880 
881 	dwc3_qcom_interconnect_exit(qcom);
882 	reset_control_assert(qcom->resets);
883 
884 	pm_runtime_allow(dev);
885 	pm_runtime_disable(dev);
886 
887 	return 0;
888 }
889 
890 static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
891 {
892 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
893 	int ret = 0;
894 
895 	ret = dwc3_qcom_suspend(qcom);
896 	if (!ret)
897 		qcom->pm_suspended = true;
898 
899 	return ret;
900 }
901 
902 static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
903 {
904 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
905 	int ret;
906 
907 	ret = dwc3_qcom_resume(qcom);
908 	if (!ret)
909 		qcom->pm_suspended = false;
910 
911 	return ret;
912 }
913 
914 static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
915 {
916 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
917 
918 	return dwc3_qcom_suspend(qcom);
919 }
920 
921 static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
922 {
923 	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
924 
925 	return dwc3_qcom_resume(qcom);
926 }
927 
928 static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
929 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
930 	SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
931 			   NULL)
932 };
933 
934 static const struct of_device_id dwc3_qcom_of_match[] = {
935 	{ .compatible = "qcom,dwc3" },
936 	{ .compatible = "qcom,msm8996-dwc3" },
937 	{ .compatible = "qcom,msm8998-dwc3" },
938 	{ .compatible = "qcom,sdm660-dwc3" },
939 	{ .compatible = "qcom,sdm845-dwc3" },
940 	{ }
941 };
942 MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
943 
944 #ifdef CONFIG_ACPI
945 static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
946 	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
947 	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
948 	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
949 	.hs_phy_irq_index = 1,
950 	.dp_hs_phy_irq_index = 4,
951 	.dm_hs_phy_irq_index = 3,
952 	.ss_phy_irq_index = 2
953 };
954 
955 static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
956 	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
957 	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
958 	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
959 	.hs_phy_irq_index = 1,
960 	.dp_hs_phy_irq_index = 4,
961 	.dm_hs_phy_irq_index = 3,
962 	.ss_phy_irq_index = 2,
963 	.is_urs = true,
964 };
965 
966 static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
967 	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
968 	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
969 	{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
970 	{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
971 	{ },
972 };
973 MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
974 #endif
975 
976 static struct platform_driver dwc3_qcom_driver = {
977 	.probe		= dwc3_qcom_probe,
978 	.remove		= dwc3_qcom_remove,
979 	.driver		= {
980 		.name	= "dwc3-qcom",
981 		.pm	= &dwc3_qcom_dev_pm_ops,
982 		.of_match_table	= dwc3_qcom_of_match,
983 		.acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
984 	},
985 };
986 
987 module_platform_driver(dwc3_qcom_driver);
988 
989 MODULE_LICENSE("GPL v2");
990 MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver");
991