xref: /openbmc/linux/drivers/usb/dwc3/dwc3-pci.c (revision fbb6b31a)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * dwc3-pci.c - PCI Specific glue layer
4  *
5  * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
6  *
7  * Authors: Felipe Balbi <balbi@ti.com>,
8  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/pci.h>
15 #include <linux/workqueue.h>
16 #include <linux/pm_runtime.h>
17 #include <linux/platform_device.h>
18 #include <linux/gpio/consumer.h>
19 #include <linux/gpio/machine.h>
20 #include <linux/acpi.h>
21 #include <linux/delay.h>
22 
23 #define PCI_DEVICE_ID_INTEL_BYT			0x0f37
24 #define PCI_DEVICE_ID_INTEL_MRFLD		0x119e
25 #define PCI_DEVICE_ID_INTEL_BSW			0x22b7
26 #define PCI_DEVICE_ID_INTEL_SPTLP		0x9d30
27 #define PCI_DEVICE_ID_INTEL_SPTH		0xa130
28 #define PCI_DEVICE_ID_INTEL_BXT			0x0aaa
29 #define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
30 #define PCI_DEVICE_ID_INTEL_APL			0x5aaa
31 #define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
32 #define PCI_DEVICE_ID_INTEL_CMLLP		0x02ee
33 #define PCI_DEVICE_ID_INTEL_CMLH		0x06ee
34 #define PCI_DEVICE_ID_INTEL_GLK			0x31aa
35 #define PCI_DEVICE_ID_INTEL_CNPLP		0x9dee
36 #define PCI_DEVICE_ID_INTEL_CNPH		0xa36e
37 #define PCI_DEVICE_ID_INTEL_CNPV		0xa3b0
38 #define PCI_DEVICE_ID_INTEL_ICLLP		0x34ee
39 #define PCI_DEVICE_ID_INTEL_EHL			0x4b7e
40 #define PCI_DEVICE_ID_INTEL_TGPLP		0xa0ee
41 #define PCI_DEVICE_ID_INTEL_TGPH		0x43ee
42 #define PCI_DEVICE_ID_INTEL_JSP			0x4dee
43 #define PCI_DEVICE_ID_INTEL_ADL			0x465e
44 #define PCI_DEVICE_ID_INTEL_ADLP		0x51ee
45 #define PCI_DEVICE_ID_INTEL_ADLM		0x54ee
46 #define PCI_DEVICE_ID_INTEL_ADLS		0x7ae1
47 #define PCI_DEVICE_ID_INTEL_RPLS		0x7a61
48 #define PCI_DEVICE_ID_INTEL_MTLP		0x7ec1
49 #define PCI_DEVICE_ID_INTEL_MTL			0x7e7e
50 #define PCI_DEVICE_ID_INTEL_TGL			0x9a15
51 #define PCI_DEVICE_ID_AMD_MR			0x163a
52 
53 #define PCI_INTEL_BXT_DSM_GUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
54 #define PCI_INTEL_BXT_FUNC_PMU_PWR	4
55 #define PCI_INTEL_BXT_STATE_D0		0
56 #define PCI_INTEL_BXT_STATE_D3		3
57 
58 #define GP_RWBAR			1
59 #define GP_RWREG1			0xa0
60 #define GP_RWREG1_ULPI_REFCLK_DISABLE	(1 << 17)
61 
62 /**
63  * struct dwc3_pci - Driver private structure
64  * @dwc3: child dwc3 platform_device
65  * @pci: our link to PCI bus
66  * @guid: _DSM GUID
67  * @has_dsm_for_pm: true for devices which need to run _DSM on runtime PM
68  * @wakeup_work: work for asynchronous resume
69  */
70 struct dwc3_pci {
71 	struct platform_device *dwc3;
72 	struct pci_dev *pci;
73 
74 	guid_t guid;
75 
76 	unsigned int has_dsm_for_pm:1;
77 	struct work_struct wakeup_work;
78 };
79 
80 static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
81 static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
82 
83 static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
84 	{ "reset-gpios", &reset_gpios, 1 },
85 	{ "cs-gpios", &cs_gpios, 1 },
86 	{ },
87 };
88 
89 static struct gpiod_lookup_table platform_bytcr_gpios = {
90 	.dev_id		= "0000:00:16.0",
91 	.table		= {
92 		GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH),
93 		GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH),
94 		{}
95 	},
96 };
97 
98 static int dwc3_byt_enable_ulpi_refclock(struct pci_dev *pci)
99 {
100 	void __iomem	*reg;
101 	u32		value;
102 
103 	reg = pcim_iomap(pci, GP_RWBAR, 0);
104 	if (!reg)
105 		return -ENOMEM;
106 
107 	value = readl(reg + GP_RWREG1);
108 	if (!(value & GP_RWREG1_ULPI_REFCLK_DISABLE))
109 		goto unmap; /* ULPI refclk already enabled */
110 
111 	value &= ~GP_RWREG1_ULPI_REFCLK_DISABLE;
112 	writel(value, reg + GP_RWREG1);
113 	/* This comes from the Intel Android x86 tree w/o any explanation */
114 	msleep(100);
115 unmap:
116 	pcim_iounmap(pci, reg);
117 	return 0;
118 }
119 
120 static const struct property_entry dwc3_pci_intel_properties[] = {
121 	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
122 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
123 	{}
124 };
125 
126 static const struct property_entry dwc3_pci_intel_phy_charger_detect_properties[] = {
127 	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
128 	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
129 	PROPERTY_ENTRY_BOOL("linux,phy_charger_detect"),
130 	{}
131 };
132 
133 static const struct property_entry dwc3_pci_intel_byt_properties[] = {
134 	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
135 	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
136 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
137 	{}
138 };
139 
140 static const struct property_entry dwc3_pci_mrfld_properties[] = {
141 	PROPERTY_ENTRY_STRING("dr_mode", "otg"),
142 	PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
143 	PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
144 	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
145 	PROPERTY_ENTRY_BOOL("snps,usb2-gadget-lpm-disable"),
146 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
147 	{}
148 };
149 
150 static const struct property_entry dwc3_pci_amd_properties[] = {
151 	PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
152 	PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
153 	PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
154 	PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
155 	PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
156 	PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
157 	PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
158 	PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
159 	PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
160 	PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
161 	PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
162 	/* FIXME these quirks should be removed when AMD NL tapes out */
163 	PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
164 	PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
165 	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
166 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
167 	{}
168 };
169 
170 static const struct property_entry dwc3_pci_mr_properties[] = {
171 	PROPERTY_ENTRY_STRING("dr_mode", "otg"),
172 	PROPERTY_ENTRY_BOOL("usb-role-switch"),
173 	PROPERTY_ENTRY_STRING("role-switch-default-mode", "host"),
174 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
175 	{}
176 };
177 
178 static const struct software_node dwc3_pci_intel_swnode = {
179 	.properties = dwc3_pci_intel_properties,
180 };
181 
182 static const struct software_node dwc3_pci_intel_phy_charger_detect_swnode = {
183 	.properties = dwc3_pci_intel_phy_charger_detect_properties,
184 };
185 
186 static const struct software_node dwc3_pci_intel_byt_swnode = {
187 	.properties = dwc3_pci_intel_byt_properties,
188 };
189 
190 static const struct software_node dwc3_pci_intel_mrfld_swnode = {
191 	.properties = dwc3_pci_mrfld_properties,
192 };
193 
194 static const struct software_node dwc3_pci_amd_swnode = {
195 	.properties = dwc3_pci_amd_properties,
196 };
197 
198 static const struct software_node dwc3_pci_amd_mr_swnode = {
199 	.properties = dwc3_pci_mr_properties,
200 };
201 
202 static int dwc3_pci_quirks(struct dwc3_pci *dwc,
203 			   const struct software_node *swnode)
204 {
205 	struct pci_dev			*pdev = dwc->pci;
206 
207 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
208 		if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
209 		    pdev->device == PCI_DEVICE_ID_INTEL_BXT_M ||
210 		    pdev->device == PCI_DEVICE_ID_INTEL_EHL) {
211 			guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
212 			dwc->has_dsm_for_pm = true;
213 		}
214 
215 		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
216 			struct gpio_desc *gpio;
217 			int ret;
218 
219 			/* On BYT the FW does not always enable the refclock */
220 			ret = dwc3_byt_enable_ulpi_refclock(pdev);
221 			if (ret)
222 				return ret;
223 
224 			ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
225 					acpi_dwc3_byt_gpios);
226 			if (ret)
227 				dev_dbg(&pdev->dev, "failed to add mapping table\n");
228 
229 			/*
230 			 * A lot of BYT devices lack ACPI resource entries for
231 			 * the GPIOs, add a fallback mapping to the reference
232 			 * design GPIOs which all boards seem to use.
233 			 */
234 			gpiod_add_lookup_table(&platform_bytcr_gpios);
235 
236 			/*
237 			 * These GPIOs will turn on the USB2 PHY. Note that we have to
238 			 * put the gpio descriptors again here because the phy driver
239 			 * might want to grab them, too.
240 			 */
241 			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
242 			if (IS_ERR(gpio))
243 				return PTR_ERR(gpio);
244 
245 			gpiod_set_value_cansleep(gpio, 1);
246 			gpiod_put(gpio);
247 
248 			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
249 			if (IS_ERR(gpio))
250 				return PTR_ERR(gpio);
251 
252 			if (gpio) {
253 				gpiod_set_value_cansleep(gpio, 1);
254 				gpiod_put(gpio);
255 				usleep_range(10000, 11000);
256 			}
257 
258 			/*
259 			 * Make the pdev name predictable (only 1 DWC3 on BYT)
260 			 * and patch the phy dev-name into the lookup table so
261 			 * that the phy-driver can get the GPIOs.
262 			 */
263 			dwc->dwc3->id = PLATFORM_DEVID_NONE;
264 			platform_bytcr_gpios.dev_id = "dwc3.ulpi";
265 
266 			/*
267 			 * Some Android tablets with a Crystal Cove PMIC
268 			 * (INT33FD), rely on the TUSB1211 phy for charger
269 			 * detection. These can be identified by them _not_
270 			 * using the standard ACPI battery and ac drivers.
271 			 */
272 			if (acpi_dev_present("INT33FD", "1", 2) &&
273 			    acpi_quirk_skip_acpi_ac_and_battery()) {
274 				dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
275 				swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
276 			}
277 		}
278 	}
279 
280 	return device_add_software_node(&dwc->dwc3->dev, swnode);
281 }
282 
283 #ifdef CONFIG_PM
284 static void dwc3_pci_resume_work(struct work_struct *work)
285 {
286 	struct dwc3_pci *dwc = container_of(work, struct dwc3_pci, wakeup_work);
287 	struct platform_device *dwc3 = dwc->dwc3;
288 	int ret;
289 
290 	ret = pm_runtime_get_sync(&dwc3->dev);
291 	if (ret) {
292 		pm_runtime_put_sync_autosuspend(&dwc3->dev);
293 		return;
294 	}
295 
296 	pm_runtime_mark_last_busy(&dwc3->dev);
297 	pm_runtime_put_sync_autosuspend(&dwc3->dev);
298 }
299 #endif
300 
301 static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
302 {
303 	struct dwc3_pci		*dwc;
304 	struct resource		res[2];
305 	int			ret;
306 	struct device		*dev = &pci->dev;
307 
308 	ret = pcim_enable_device(pci);
309 	if (ret) {
310 		dev_err(dev, "failed to enable pci device\n");
311 		return -ENODEV;
312 	}
313 
314 	pci_set_master(pci);
315 
316 	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
317 	if (!dwc)
318 		return -ENOMEM;
319 
320 	dwc->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
321 	if (!dwc->dwc3)
322 		return -ENOMEM;
323 
324 	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
325 
326 	res[0].start	= pci_resource_start(pci, 0);
327 	res[0].end	= pci_resource_end(pci, 0);
328 	res[0].name	= "dwc_usb3";
329 	res[0].flags	= IORESOURCE_MEM;
330 
331 	res[1].start	= pci->irq;
332 	res[1].name	= "dwc_usb3";
333 	res[1].flags	= IORESOURCE_IRQ;
334 
335 	ret = platform_device_add_resources(dwc->dwc3, res, ARRAY_SIZE(res));
336 	if (ret) {
337 		dev_err(dev, "couldn't add resources to dwc3 device\n");
338 		goto err;
339 	}
340 
341 	dwc->pci = pci;
342 	dwc->dwc3->dev.parent = dev;
343 	ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));
344 
345 	ret = dwc3_pci_quirks(dwc, (void *)id->driver_data);
346 	if (ret)
347 		goto err;
348 
349 	ret = platform_device_add(dwc->dwc3);
350 	if (ret) {
351 		dev_err(dev, "failed to register dwc3 device\n");
352 		goto err;
353 	}
354 
355 	device_init_wakeup(dev, true);
356 	pci_set_drvdata(pci, dwc);
357 	pm_runtime_put(dev);
358 #ifdef CONFIG_PM
359 	INIT_WORK(&dwc->wakeup_work, dwc3_pci_resume_work);
360 #endif
361 
362 	return 0;
363 err:
364 	device_remove_software_node(&dwc->dwc3->dev);
365 	platform_device_put(dwc->dwc3);
366 	return ret;
367 }
368 
369 static void dwc3_pci_remove(struct pci_dev *pci)
370 {
371 	struct dwc3_pci		*dwc = pci_get_drvdata(pci);
372 	struct pci_dev		*pdev = dwc->pci;
373 
374 	if (pdev->device == PCI_DEVICE_ID_INTEL_BYT)
375 		gpiod_remove_lookup_table(&platform_bytcr_gpios);
376 #ifdef CONFIG_PM
377 	cancel_work_sync(&dwc->wakeup_work);
378 #endif
379 	device_init_wakeup(&pci->dev, false);
380 	pm_runtime_get(&pci->dev);
381 	device_remove_software_node(&dwc->dwc3->dev);
382 	platform_device_unregister(dwc->dwc3);
383 }
384 
385 static const struct pci_device_id dwc3_pci_id_table[] = {
386 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BSW),
387 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
388 
389 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT),
390 	  (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, },
391 
392 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
393 	  (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, },
394 
395 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CMLLP),
396 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
397 
398 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CMLH),
399 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
400 
401 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SPTLP),
402 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
403 
404 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SPTH),
405 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
406 
407 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BXT),
408 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
409 
410 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BXT_M),
411 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
412 
413 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_APL),
414 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
415 
416 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_KBP),
417 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
418 
419 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_GLK),
420 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
421 
422 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPLP),
423 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
424 
425 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPH),
426 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
427 
428 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPV),
429 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
430 
431 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP),
432 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
433 
434 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHL),
435 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
436 
437 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP),
438 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
439 
440 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH),
441 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
442 
443 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP),
444 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
445 
446 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL),
447 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
448 
449 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLP),
450 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
451 
452 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLM),
453 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
454 
455 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS),
456 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
457 
458 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS),
459 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
460 
461 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTLP),
462 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
463 
464 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL),
465 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
466 
467 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL),
468 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
469 
470 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB),
471 	  (kernel_ulong_t) &dwc3_pci_amd_swnode, },
472 
473 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_MR),
474 	  (kernel_ulong_t)&dwc3_pci_amd_mr_swnode, },
475 
476 	{  }	/* Terminating Entry */
477 };
478 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
479 
480 #if defined(CONFIG_PM) || defined(CONFIG_PM_SLEEP)
481 static int dwc3_pci_dsm(struct dwc3_pci *dwc, int param)
482 {
483 	union acpi_object *obj;
484 	union acpi_object tmp;
485 	union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
486 
487 	if (!dwc->has_dsm_for_pm)
488 		return 0;
489 
490 	tmp.type = ACPI_TYPE_INTEGER;
491 	tmp.integer.value = param;
492 
493 	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dwc->pci->dev), &dwc->guid,
494 			1, PCI_INTEL_BXT_FUNC_PMU_PWR, &argv4);
495 	if (!obj) {
496 		dev_err(&dwc->pci->dev, "failed to evaluate _DSM\n");
497 		return -EIO;
498 	}
499 
500 	ACPI_FREE(obj);
501 
502 	return 0;
503 }
504 #endif /* CONFIG_PM || CONFIG_PM_SLEEP */
505 
506 #ifdef CONFIG_PM
507 static int dwc3_pci_runtime_suspend(struct device *dev)
508 {
509 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
510 
511 	if (device_can_wakeup(dev))
512 		return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
513 
514 	return -EBUSY;
515 }
516 
517 static int dwc3_pci_runtime_resume(struct device *dev)
518 {
519 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
520 	int			ret;
521 
522 	ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
523 	if (ret)
524 		return ret;
525 
526 	queue_work(pm_wq, &dwc->wakeup_work);
527 
528 	return 0;
529 }
530 #endif /* CONFIG_PM */
531 
532 #ifdef CONFIG_PM_SLEEP
533 static int dwc3_pci_suspend(struct device *dev)
534 {
535 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
536 
537 	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
538 }
539 
540 static int dwc3_pci_resume(struct device *dev)
541 {
542 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
543 
544 	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
545 }
546 #endif /* CONFIG_PM_SLEEP */
547 
548 static const struct dev_pm_ops dwc3_pci_dev_pm_ops = {
549 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume)
550 	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume,
551 		NULL)
552 };
553 
554 static struct pci_driver dwc3_pci_driver = {
555 	.name		= "dwc3-pci",
556 	.id_table	= dwc3_pci_id_table,
557 	.probe		= dwc3_pci_probe,
558 	.remove		= dwc3_pci_remove,
559 	.driver		= {
560 		.pm	= &dwc3_pci_dev_pm_ops,
561 	}
562 };
563 
564 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
565 MODULE_LICENSE("GPL v2");
566 MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
567 
568 module_pci_driver(dwc3_pci_driver);
569