xref: /openbmc/linux/drivers/usb/dwc3/dwc3-pci.c (revision d2c43ff1)
1 /**
2  * dwc3-pci.c - PCI Specific glue layer
3  *
4  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
5  *
6  * Authors: Felipe Balbi <balbi@ti.com>,
7  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
8  *
9  * This program is free software: you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2  of
11  * the License as published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  */
18 
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22 #include <linux/pci.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/platform_device.h>
25 #include <linux/gpio/consumer.h>
26 #include <linux/acpi.h>
27 #include <linux/delay.h>
28 
29 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd
30 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce
31 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31	0xabcf
32 #define PCI_DEVICE_ID_INTEL_BYT			0x0f37
33 #define PCI_DEVICE_ID_INTEL_MRFLD		0x119e
34 #define PCI_DEVICE_ID_INTEL_BSW			0x22b7
35 #define PCI_DEVICE_ID_INTEL_SPTLP		0x9d30
36 #define PCI_DEVICE_ID_INTEL_SPTH		0xa130
37 #define PCI_DEVICE_ID_INTEL_BXT			0x0aaa
38 #define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
39 #define PCI_DEVICE_ID_INTEL_APL			0x5aaa
40 #define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
41 #define PCI_DEVICE_ID_INTEL_GLK			0x31aa
42 #define PCI_DEVICE_ID_INTEL_CNPLP		0x9dee
43 #define PCI_DEVICE_ID_INTEL_CNPH		0xa36e
44 
45 #define PCI_INTEL_BXT_DSM_GUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
46 #define PCI_INTEL_BXT_FUNC_PMU_PWR	4
47 #define PCI_INTEL_BXT_STATE_D0		0
48 #define PCI_INTEL_BXT_STATE_D3		3
49 
50 /**
51  * struct dwc3_pci - Driver private structure
52  * @dwc3: child dwc3 platform_device
53  * @pci: our link to PCI bus
54  * @guid: _DSM GUID
55  * @has_dsm_for_pm: true for devices which need to run _DSM on runtime PM
56  */
57 struct dwc3_pci {
58 	struct platform_device *dwc3;
59 	struct pci_dev *pci;
60 
61 	guid_t guid;
62 
63 	unsigned int has_dsm_for_pm:1;
64 };
65 
66 static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
67 static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
68 
69 static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
70 	{ "reset-gpios", &reset_gpios, 1 },
71 	{ "cs-gpios", &cs_gpios, 1 },
72 	{ },
73 };
74 
75 static int dwc3_pci_quirks(struct dwc3_pci *dwc)
76 {
77 	struct platform_device		*dwc3 = dwc->dwc3;
78 	struct pci_dev			*pdev = dwc->pci;
79 
80 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
81 	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
82 		struct property_entry properties[] = {
83 			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
84 			PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
85 			PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
86 			PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
87 			PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
88 			PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
89 			PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
90 			PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
91 			PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
92 			PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
93 			PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
94 			/*
95 			 * FIXME these quirks should be removed when AMD NL
96 			 * tapes out
97 			 */
98 			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
99 			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
100 			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
101 			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
102 			{ },
103 		};
104 
105 		return platform_device_add_properties(dwc3, properties);
106 	}
107 
108 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
109 		int ret;
110 
111 		struct property_entry properties[] = {
112 			PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
113 			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
114 			{ }
115 		};
116 
117 		ret = platform_device_add_properties(dwc3, properties);
118 		if (ret < 0)
119 			return ret;
120 
121 		if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
122 				pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) {
123 			guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
124 			dwc->has_dsm_for_pm = true;
125 		}
126 
127 		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
128 			struct gpio_desc *gpio;
129 
130 			ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
131 					acpi_dwc3_byt_gpios);
132 			if (ret)
133 				dev_dbg(&pdev->dev, "failed to add mapping table\n");
134 
135 			/*
136 			 * These GPIOs will turn on the USB2 PHY. Note that we have to
137 			 * put the gpio descriptors again here because the phy driver
138 			 * might want to grab them, too.
139 			 */
140 			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
141 			if (IS_ERR(gpio))
142 				return PTR_ERR(gpio);
143 
144 			gpiod_set_value_cansleep(gpio, 1);
145 			gpiod_put(gpio);
146 
147 			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
148 			if (IS_ERR(gpio))
149 				return PTR_ERR(gpio);
150 
151 			if (gpio) {
152 				gpiod_set_value_cansleep(gpio, 1);
153 				gpiod_put(gpio);
154 				usleep_range(10000, 11000);
155 			}
156 		}
157 	}
158 
159 	if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
160 	    (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
161 	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
162 	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
163 		struct property_entry properties[] = {
164 			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
165 			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
166 			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
167 			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
168 			{ },
169 		};
170 
171 		return platform_device_add_properties(dwc3, properties);
172 	}
173 
174 	return 0;
175 }
176 
177 static int dwc3_pci_probe(struct pci_dev *pci,
178 		const struct pci_device_id *id)
179 {
180 	struct dwc3_pci		*dwc;
181 	struct resource		res[2];
182 	int			ret;
183 	struct device		*dev = &pci->dev;
184 
185 	ret = pcim_enable_device(pci);
186 	if (ret) {
187 		dev_err(dev, "failed to enable pci device\n");
188 		return -ENODEV;
189 	}
190 
191 	pci_set_master(pci);
192 
193 	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
194 	if (!dwc)
195 		return -ENOMEM;
196 
197 	dwc->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
198 	if (!dwc->dwc3)
199 		return -ENOMEM;
200 
201 	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
202 
203 	res[0].start	= pci_resource_start(pci, 0);
204 	res[0].end	= pci_resource_end(pci, 0);
205 	res[0].name	= "dwc_usb3";
206 	res[0].flags	= IORESOURCE_MEM;
207 
208 	res[1].start	= pci->irq;
209 	res[1].name	= "dwc_usb3";
210 	res[1].flags	= IORESOURCE_IRQ;
211 
212 	ret = platform_device_add_resources(dwc->dwc3, res, ARRAY_SIZE(res));
213 	if (ret) {
214 		dev_err(dev, "couldn't add resources to dwc3 device\n");
215 		return ret;
216 	}
217 
218 	dwc->pci = pci;
219 	dwc->dwc3->dev.parent = dev;
220 	ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));
221 
222 	ret = dwc3_pci_quirks(dwc);
223 	if (ret)
224 		goto err;
225 
226 	ret = platform_device_add(dwc->dwc3);
227 	if (ret) {
228 		dev_err(dev, "failed to register dwc3 device\n");
229 		goto err;
230 	}
231 
232 	device_init_wakeup(dev, true);
233 	pci_set_drvdata(pci, dwc);
234 	pm_runtime_put(dev);
235 
236 	return 0;
237 err:
238 	platform_device_put(dwc->dwc3);
239 	return ret;
240 }
241 
242 static void dwc3_pci_remove(struct pci_dev *pci)
243 {
244 	struct dwc3_pci		*dwc = pci_get_drvdata(pci);
245 
246 	device_init_wakeup(&pci->dev, false);
247 	pm_runtime_get(&pci->dev);
248 	platform_device_unregister(dwc->dwc3);
249 }
250 
251 static const struct pci_device_id dwc3_pci_id_table[] = {
252 	{
253 		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
254 				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
255 	},
256 	{
257 		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
258 				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
259 	},
260 	{
261 		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
262 				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
263 	},
264 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
265 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
266 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
267 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
268 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
269 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
270 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
271 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
272 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
273 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
274 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), },
275 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), },
276 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
277 	{  }	/* Terminating Entry */
278 };
279 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
280 
281 #if defined(CONFIG_PM) || defined(CONFIG_PM_SLEEP)
282 static int dwc3_pci_dsm(struct dwc3_pci *dwc, int param)
283 {
284 	union acpi_object *obj;
285 	union acpi_object tmp;
286 	union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
287 
288 	if (!dwc->has_dsm_for_pm)
289 		return 0;
290 
291 	tmp.type = ACPI_TYPE_INTEGER;
292 	tmp.integer.value = param;
293 
294 	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dwc->pci->dev), &dwc->guid,
295 			1, PCI_INTEL_BXT_FUNC_PMU_PWR, &argv4);
296 	if (!obj) {
297 		dev_err(&dwc->pci->dev, "failed to evaluate _DSM\n");
298 		return -EIO;
299 	}
300 
301 	ACPI_FREE(obj);
302 
303 	return 0;
304 }
305 #endif /* CONFIG_PM || CONFIG_PM_SLEEP */
306 
307 #ifdef CONFIG_PM
308 static int dwc3_pci_runtime_suspend(struct device *dev)
309 {
310 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
311 
312 	if (device_can_wakeup(dev))
313 		return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
314 
315 	return -EBUSY;
316 }
317 
318 static int dwc3_pci_runtime_resume(struct device *dev)
319 {
320 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
321 	struct platform_device	*dwc3 = dwc->dwc3;
322 	int			ret;
323 
324 	ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
325 	if (ret)
326 		return ret;
327 
328 	return pm_runtime_get(&dwc3->dev);
329 }
330 #endif /* CONFIG_PM */
331 
332 #ifdef CONFIG_PM_SLEEP
333 static int dwc3_pci_suspend(struct device *dev)
334 {
335 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
336 
337 	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
338 }
339 
340 static int dwc3_pci_resume(struct device *dev)
341 {
342 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
343 
344 	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
345 }
346 #endif /* CONFIG_PM_SLEEP */
347 
348 static struct dev_pm_ops dwc3_pci_dev_pm_ops = {
349 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume)
350 	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume,
351 		NULL)
352 };
353 
354 static struct pci_driver dwc3_pci_driver = {
355 	.name		= "dwc3-pci",
356 	.id_table	= dwc3_pci_id_table,
357 	.probe		= dwc3_pci_probe,
358 	.remove		= dwc3_pci_remove,
359 	.driver		= {
360 		.pm	= &dwc3_pci_dev_pm_ops,
361 	}
362 };
363 
364 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
365 MODULE_LICENSE("GPL v2");
366 MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
367 
368 module_pci_driver(dwc3_pci_driver);
369