1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * dwc3-am62.c - TI specific Glue layer for AM62 DWC3 USB Controller 4 * 5 * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com 6 */ 7 8 #include <linux/init.h> 9 #include <linux/kernel.h> 10 #include <linux/module.h> 11 #include <linux/platform_device.h> 12 #include <linux/mfd/syscon.h> 13 #include <linux/of.h> 14 #include <linux/of_platform.h> 15 #include <linux/pm_runtime.h> 16 #include <linux/clk.h> 17 #include <linux/regmap.h> 18 #include <linux/pinctrl/consumer.h> 19 20 #include "core.h" 21 22 /* USB WRAPPER register offsets */ 23 #define USBSS_PID 0x0 24 #define USBSS_OVERCURRENT_CTRL 0x4 25 #define USBSS_PHY_CONFIG 0x8 26 #define USBSS_PHY_TEST 0xc 27 #define USBSS_CORE_STAT 0x14 28 #define USBSS_HOST_VBUS_CTRL 0x18 29 #define USBSS_MODE_CONTROL 0x1c 30 #define USBSS_WAKEUP_CONFIG 0x30 31 #define USBSS_WAKEUP_STAT 0x34 32 #define USBSS_OVERRIDE_CONFIG 0x38 33 #define USBSS_IRQ_MISC_STATUS_RAW 0x430 34 #define USBSS_IRQ_MISC_STATUS 0x434 35 #define USBSS_IRQ_MISC_ENABLE_SET 0x438 36 #define USBSS_IRQ_MISC_ENABLE_CLR 0x43c 37 #define USBSS_IRQ_MISC_EOI 0x440 38 #define USBSS_INTR_TEST 0x490 39 #define USBSS_VBUS_FILTER 0x614 40 #define USBSS_VBUS_STAT 0x618 41 #define USBSS_DEBUG_CFG 0x708 42 #define USBSS_DEBUG_DATA 0x70c 43 #define USBSS_HOST_HUB_CTRL 0x714 44 45 /* PHY CONFIG register bits */ 46 #define USBSS_PHY_VBUS_SEL_MASK GENMASK(2, 1) 47 #define USBSS_PHY_VBUS_SEL_SHIFT 1 48 #define USBSS_PHY_LANE_REVERSE BIT(0) 49 50 /* CORE STAT register bits */ 51 #define USBSS_CORE_OPERATIONAL_MODE_MASK GENMASK(13, 12) 52 #define USBSS_CORE_OPERATIONAL_MODE_SHIFT 12 53 54 /* MODE CONTROL register bits */ 55 #define USBSS_MODE_VALID BIT(0) 56 57 /* WAKEUP CONFIG register bits */ 58 #define USBSS_WAKEUP_CFG_OVERCURRENT_EN BIT(3) 59 #define USBSS_WAKEUP_CFG_LINESTATE_EN BIT(2) 60 #define USBSS_WAKEUP_CFG_SESSVALID_EN BIT(1) 61 #define USBSS_WAKEUP_CFG_VBUSVALID_EN BIT(0) 62 63 #define USBSS_WAKEUP_CFG_ALL (USBSS_WAKEUP_CFG_VBUSVALID_EN | \ 64 USBSS_WAKEUP_CFG_SESSVALID_EN | \ 65 USBSS_WAKEUP_CFG_LINESTATE_EN | \ 66 USBSS_WAKEUP_CFG_OVERCURRENT_EN) 67 68 #define USBSS_WAKEUP_CFG_NONE 0 69 70 /* WAKEUP STAT register bits */ 71 #define USBSS_WAKEUP_STAT_OVERCURRENT BIT(4) 72 #define USBSS_WAKEUP_STAT_LINESTATE BIT(3) 73 #define USBSS_WAKEUP_STAT_SESSVALID BIT(2) 74 #define USBSS_WAKEUP_STAT_VBUSVALID BIT(1) 75 #define USBSS_WAKEUP_STAT_CLR BIT(0) 76 77 /* IRQ_MISC_STATUS_RAW register bits */ 78 #define USBSS_IRQ_MISC_RAW_VBUSVALID BIT(22) 79 #define USBSS_IRQ_MISC_RAW_SESSVALID BIT(20) 80 81 /* IRQ_MISC_STATUS register bits */ 82 #define USBSS_IRQ_MISC_VBUSVALID BIT(22) 83 #define USBSS_IRQ_MISC_SESSVALID BIT(20) 84 85 /* IRQ_MISC_ENABLE_SET register bits */ 86 #define USBSS_IRQ_MISC_ENABLE_SET_VBUSVALID BIT(22) 87 #define USBSS_IRQ_MISC_ENABLE_SET_SESSVALID BIT(20) 88 89 /* IRQ_MISC_ENABLE_CLR register bits */ 90 #define USBSS_IRQ_MISC_ENABLE_CLR_VBUSVALID BIT(22) 91 #define USBSS_IRQ_MISC_ENABLE_CLR_SESSVALID BIT(20) 92 93 /* IRQ_MISC_EOI register bits */ 94 #define USBSS_IRQ_MISC_EOI_VECTOR BIT(0) 95 96 /* VBUS_STAT register bits */ 97 #define USBSS_VBUS_STAT_SESSVALID BIT(2) 98 #define USBSS_VBUS_STAT_VBUSVALID BIT(0) 99 100 /* Mask for PHY PLL REFCLK */ 101 #define PHY_PLL_REFCLK_MASK GENMASK(3, 0) 102 103 #define DWC3_AM62_AUTOSUSPEND_DELAY 100 104 105 struct dwc3_am62 { 106 struct device *dev; 107 void __iomem *usbss; 108 struct clk *usb2_refclk; 109 int rate_code; 110 struct regmap *syscon; 111 unsigned int offset; 112 unsigned int vbus_divider; 113 u32 wakeup_stat; 114 }; 115 116 static const int dwc3_ti_rate_table[] = { /* in KHZ */ 117 9600, 118 10000, 119 12000, 120 19200, 121 20000, 122 24000, 123 25000, 124 26000, 125 38400, 126 40000, 127 58000, 128 50000, 129 52000, 130 }; 131 132 static inline u32 dwc3_ti_readl(struct dwc3_am62 *am62, u32 offset) 133 { 134 return readl((am62->usbss) + offset); 135 } 136 137 static inline void dwc3_ti_writel(struct dwc3_am62 *am62, u32 offset, u32 value) 138 { 139 writel(value, (am62->usbss) + offset); 140 } 141 142 static int phy_syscon_pll_refclk(struct dwc3_am62 *am62) 143 { 144 struct device *dev = am62->dev; 145 struct device_node *node = dev->of_node; 146 struct of_phandle_args args; 147 struct regmap *syscon; 148 int ret; 149 150 syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-phy-pll-refclk"); 151 if (IS_ERR(syscon)) { 152 dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n"); 153 return PTR_ERR(syscon); 154 } 155 156 am62->syscon = syscon; 157 158 ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-phy-pll-refclk", 1, 159 0, &args); 160 if (ret) 161 return ret; 162 163 am62->offset = args.args[0]; 164 165 ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code); 166 if (ret) { 167 dev_err(dev, "failed to set phy pll reference clock rate\n"); 168 return ret; 169 } 170 171 return 0; 172 } 173 174 static int dwc3_ti_probe(struct platform_device *pdev) 175 { 176 struct device *dev = &pdev->dev; 177 struct device_node *node = pdev->dev.of_node; 178 struct dwc3_am62 *am62; 179 int i, ret; 180 unsigned long rate; 181 u32 reg; 182 183 am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL); 184 if (!am62) 185 return -ENOMEM; 186 187 am62->dev = dev; 188 platform_set_drvdata(pdev, am62); 189 190 am62->usbss = devm_platform_ioremap_resource(pdev, 0); 191 if (IS_ERR(am62->usbss)) { 192 dev_err(dev, "can't map IOMEM resource\n"); 193 return PTR_ERR(am62->usbss); 194 } 195 196 am62->usb2_refclk = devm_clk_get(dev, "ref"); 197 if (IS_ERR(am62->usb2_refclk)) { 198 dev_err(dev, "can't get usb2_refclk\n"); 199 return PTR_ERR(am62->usb2_refclk); 200 } 201 202 /* Calculate the rate code */ 203 rate = clk_get_rate(am62->usb2_refclk); 204 rate /= 1000; // To KHz 205 for (i = 0; i < ARRAY_SIZE(dwc3_ti_rate_table); i++) { 206 if (dwc3_ti_rate_table[i] == rate) 207 break; 208 } 209 210 if (i == ARRAY_SIZE(dwc3_ti_rate_table)) { 211 dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate); 212 return -EINVAL; 213 } 214 215 am62->rate_code = i; 216 217 /* Read the syscon property and set the rate code */ 218 ret = phy_syscon_pll_refclk(am62); 219 if (ret) 220 return ret; 221 222 /* VBUS divider select */ 223 am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); 224 reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG); 225 if (am62->vbus_divider) 226 reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT; 227 228 dwc3_ti_writel(am62, USBSS_PHY_CONFIG, reg); 229 230 pm_runtime_set_active(dev); 231 pm_runtime_enable(dev); 232 /* 233 * Don't ignore its dependencies with its children 234 */ 235 pm_suspend_ignore_children(dev, false); 236 clk_prepare_enable(am62->usb2_refclk); 237 pm_runtime_get_noresume(dev); 238 239 ret = of_platform_populate(node, NULL, NULL, dev); 240 if (ret) { 241 dev_err(dev, "failed to create dwc3 core: %d\n", ret); 242 goto err_pm_disable; 243 } 244 245 /* Set mode valid bit to indicate role is valid */ 246 reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); 247 reg |= USBSS_MODE_VALID; 248 dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); 249 250 /* Device has capability to wakeup system from sleep */ 251 device_set_wakeup_capable(dev, true); 252 ret = device_wakeup_enable(dev); 253 if (ret) 254 dev_err(dev, "couldn't enable device as a wakeup source: %d\n", ret); 255 256 /* Setting up autosuspend */ 257 pm_runtime_set_autosuspend_delay(dev, DWC3_AM62_AUTOSUSPEND_DELAY); 258 pm_runtime_use_autosuspend(dev); 259 pm_runtime_mark_last_busy(dev); 260 pm_runtime_put_autosuspend(dev); 261 return 0; 262 263 err_pm_disable: 264 clk_disable_unprepare(am62->usb2_refclk); 265 pm_runtime_disable(dev); 266 pm_runtime_set_suspended(dev); 267 return ret; 268 } 269 270 static void dwc3_ti_remove(struct platform_device *pdev) 271 { 272 struct device *dev = &pdev->dev; 273 struct dwc3_am62 *am62 = platform_get_drvdata(pdev); 274 u32 reg; 275 276 pm_runtime_get_sync(dev); 277 device_init_wakeup(dev, false); 278 of_platform_depopulate(dev); 279 280 /* Clear mode valid bit */ 281 reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); 282 reg &= ~USBSS_MODE_VALID; 283 dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); 284 285 pm_runtime_put_sync(dev); 286 pm_runtime_disable(dev); 287 pm_runtime_set_suspended(dev); 288 } 289 290 #ifdef CONFIG_PM 291 static int dwc3_ti_suspend_common(struct device *dev) 292 { 293 struct dwc3_am62 *am62 = dev_get_drvdata(dev); 294 u32 reg, current_prtcap_dir; 295 296 if (device_may_wakeup(dev)) { 297 reg = dwc3_ti_readl(am62, USBSS_CORE_STAT); 298 current_prtcap_dir = (reg & USBSS_CORE_OPERATIONAL_MODE_MASK) 299 >> USBSS_CORE_OPERATIONAL_MODE_SHIFT; 300 /* Set wakeup config enable bits */ 301 reg = dwc3_ti_readl(am62, USBSS_WAKEUP_CONFIG); 302 if (current_prtcap_dir == DWC3_GCTL_PRTCAP_HOST) { 303 reg = USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN; 304 } else { 305 reg = USBSS_WAKEUP_CFG_VBUSVALID_EN | USBSS_WAKEUP_CFG_SESSVALID_EN; 306 /* 307 * Enable LINESTATE wake up only if connected to bus 308 * and in U2/L3 state else it causes spurious wake-up. 309 */ 310 } 311 dwc3_ti_writel(am62, USBSS_WAKEUP_CONFIG, reg); 312 /* clear wakeup status so we know what caused the wake up */ 313 dwc3_ti_writel(am62, USBSS_WAKEUP_STAT, USBSS_WAKEUP_STAT_CLR); 314 } 315 316 clk_disable_unprepare(am62->usb2_refclk); 317 318 return 0; 319 } 320 321 static int dwc3_ti_resume_common(struct device *dev) 322 { 323 struct dwc3_am62 *am62 = dev_get_drvdata(dev); 324 u32 reg; 325 326 clk_prepare_enable(am62->usb2_refclk); 327 328 if (device_may_wakeup(dev)) { 329 /* Clear wakeup config enable bits */ 330 dwc3_ti_writel(am62, USBSS_WAKEUP_CONFIG, USBSS_WAKEUP_CFG_NONE); 331 } 332 333 reg = dwc3_ti_readl(am62, USBSS_WAKEUP_STAT); 334 am62->wakeup_stat = reg; 335 336 return 0; 337 } 338 339 static UNIVERSAL_DEV_PM_OPS(dwc3_ti_pm_ops, dwc3_ti_suspend_common, 340 dwc3_ti_resume_common, NULL); 341 342 #define DEV_PM_OPS (&dwc3_ti_pm_ops) 343 #else 344 #define DEV_PM_OPS NULL 345 #endif /* CONFIG_PM */ 346 347 static const struct of_device_id dwc3_ti_of_match[] = { 348 { .compatible = "ti,am62-usb"}, 349 {}, 350 }; 351 MODULE_DEVICE_TABLE(of, dwc3_ti_of_match); 352 353 static struct platform_driver dwc3_ti_driver = { 354 .probe = dwc3_ti_probe, 355 .remove_new = dwc3_ti_remove, 356 .driver = { 357 .name = "dwc3-am62", 358 .pm = DEV_PM_OPS, 359 .of_match_table = dwc3_ti_of_match, 360 }, 361 }; 362 363 module_platform_driver(dwc3_ti_driver); 364 365 MODULE_ALIAS("platform:dwc3-am62"); 366 MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>"); 367 MODULE_LICENSE("GPL"); 368 MODULE_DESCRIPTION("DesignWare USB3 TI Glue Layer"); 369