xref: /openbmc/linux/drivers/usb/dwc2/platform.c (revision 90848a25)
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * platform.c - DesignWare HS OTG Controller platform driver
4  *
5  * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
6  */
7 
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/slab.h>
11 #include <linux/clk.h>
12 #include <linux/device.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/of_device.h>
15 #include <linux/mutex.h>
16 #include <linux/platform_device.h>
17 #include <linux/phy/phy.h>
18 #include <linux/platform_data/s3c-hsotg.h>
19 #include <linux/reset.h>
20 
21 #include <linux/usb/of.h>
22 
23 #include "core.h"
24 #include "hcd.h"
25 #include "debug.h"
26 
27 static const char dwc2_driver_name[] = "dwc2";
28 
29 /*
30  * Check the dr_mode against the module configuration and hardware
31  * capabilities.
32  *
33  * The hardware, module, and dr_mode, can each be set to host, device,
34  * or otg. Check that all these values are compatible and adjust the
35  * value of dr_mode if possible.
36  *
37  *                      actual
38  *    HW  MOD dr_mode   dr_mode
39  *  ------------------------------
40  *   HST  HST  any    :  HST
41  *   HST  DEV  any    :  ---
42  *   HST  OTG  any    :  HST
43  *
44  *   DEV  HST  any    :  ---
45  *   DEV  DEV  any    :  DEV
46  *   DEV  OTG  any    :  DEV
47  *
48  *   OTG  HST  any    :  HST
49  *   OTG  DEV  any    :  DEV
50  *   OTG  OTG  any    :  dr_mode
51  */
52 static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
53 {
54 	enum usb_dr_mode mode;
55 
56 	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
57 	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
58 		hsotg->dr_mode = USB_DR_MODE_OTG;
59 
60 	mode = hsotg->dr_mode;
61 
62 	if (dwc2_hw_is_device(hsotg)) {
63 		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
64 			dev_err(hsotg->dev,
65 				"Controller does not support host mode.\n");
66 			return -EINVAL;
67 		}
68 		mode = USB_DR_MODE_PERIPHERAL;
69 	} else if (dwc2_hw_is_host(hsotg)) {
70 		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
71 			dev_err(hsotg->dev,
72 				"Controller does not support device mode.\n");
73 			return -EINVAL;
74 		}
75 		mode = USB_DR_MODE_HOST;
76 	} else {
77 		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
78 			mode = USB_DR_MODE_HOST;
79 		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
80 			mode = USB_DR_MODE_PERIPHERAL;
81 	}
82 
83 	if (mode != hsotg->dr_mode) {
84 		dev_warn(hsotg->dev,
85 			 "Configuration mismatch. dr_mode forced to %s\n",
86 			mode == USB_DR_MODE_HOST ? "host" : "device");
87 
88 		hsotg->dr_mode = mode;
89 	}
90 
91 	return 0;
92 }
93 
94 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
95 {
96 	struct platform_device *pdev = to_platform_device(hsotg->dev);
97 	int ret;
98 
99 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
100 				    hsotg->supplies);
101 	if (ret)
102 		return ret;
103 
104 	if (hsotg->utmi_clk) {
105 		ret = clk_prepare_enable(hsotg->utmi_clk);
106 		if (ret)
107 			goto err_dis_reg;
108 	}
109 
110 	if (hsotg->clk) {
111 		ret = clk_prepare_enable(hsotg->clk);
112 		if (ret)
113 			goto err_dis_utmi_clk;
114 	}
115 
116 	if (hsotg->uphy) {
117 		ret = usb_phy_init(hsotg->uphy);
118 	} else if (hsotg->plat && hsotg->plat->phy_init) {
119 		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
120 	} else {
121 		ret = phy_init(hsotg->phy);
122 		if (ret == 0) {
123 			ret = phy_power_on(hsotg->phy);
124 			if (ret)
125 				phy_exit(hsotg->phy);
126 		}
127 	}
128 
129 	if (ret)
130 		goto err_dis_clk;
131 
132 	return 0;
133 
134 err_dis_clk:
135 	if (hsotg->clk)
136 		clk_disable_unprepare(hsotg->clk);
137 
138 err_dis_utmi_clk:
139 	if (hsotg->utmi_clk)
140 		clk_disable_unprepare(hsotg->utmi_clk);
141 
142 err_dis_reg:
143 	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
144 
145 	return ret;
146 }
147 
148 /**
149  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
150  * @hsotg: The driver state
151  *
152  * A wrapper for platform code responsible for controlling
153  * low-level USB platform resources (phy, clock, regulators)
154  */
155 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
156 {
157 	int ret = __dwc2_lowlevel_hw_enable(hsotg);
158 
159 	if (ret == 0)
160 		hsotg->ll_hw_enabled = true;
161 	return ret;
162 }
163 
164 static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
165 {
166 	struct platform_device *pdev = to_platform_device(hsotg->dev);
167 	int ret = 0;
168 
169 	if (hsotg->uphy) {
170 		usb_phy_shutdown(hsotg->uphy);
171 	} else if (hsotg->plat && hsotg->plat->phy_exit) {
172 		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
173 	} else {
174 		ret = phy_power_off(hsotg->phy);
175 		if (ret == 0)
176 			ret = phy_exit(hsotg->phy);
177 	}
178 	if (ret)
179 		return ret;
180 
181 	if (hsotg->clk)
182 		clk_disable_unprepare(hsotg->clk);
183 
184 	if (hsotg->utmi_clk)
185 		clk_disable_unprepare(hsotg->utmi_clk);
186 
187 	return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
188 }
189 
190 /**
191  * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
192  * @hsotg: The driver state
193  *
194  * A wrapper for platform code responsible for controlling
195  * low-level USB platform resources (phy, clock, regulators)
196  */
197 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
198 {
199 	int ret = __dwc2_lowlevel_hw_disable(hsotg);
200 
201 	if (ret == 0)
202 		hsotg->ll_hw_enabled = false;
203 	return ret;
204 }
205 
206 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
207 {
208 	int i, ret;
209 
210 	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
211 	if (IS_ERR(hsotg->reset))
212 		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset),
213 				     "error getting reset control\n");
214 
215 	reset_control_deassert(hsotg->reset);
216 
217 	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
218 	if (IS_ERR(hsotg->reset_ecc))
219 		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc),
220 				     "error getting reset control for ecc\n");
221 
222 	reset_control_deassert(hsotg->reset_ecc);
223 
224 	/*
225 	 * Attempt to find a generic PHY, then look for an old style
226 	 * USB PHY and then fall back to pdata
227 	 */
228 	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
229 	if (IS_ERR(hsotg->phy)) {
230 		ret = PTR_ERR(hsotg->phy);
231 		switch (ret) {
232 		case -ENODEV:
233 		case -ENOSYS:
234 			hsotg->phy = NULL;
235 			break;
236 		default:
237 			return dev_err_probe(hsotg->dev, ret, "error getting phy\n");
238 		}
239 	}
240 
241 	if (!hsotg->phy) {
242 		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
243 		if (IS_ERR(hsotg->uphy)) {
244 			ret = PTR_ERR(hsotg->uphy);
245 			switch (ret) {
246 			case -ENODEV:
247 			case -ENXIO:
248 				hsotg->uphy = NULL;
249 				break;
250 			default:
251 				return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n");
252 			}
253 		}
254 	}
255 
256 	hsotg->plat = dev_get_platdata(hsotg->dev);
257 
258 	/* Clock */
259 	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
260 	if (IS_ERR(hsotg->clk))
261 		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
262 
263 	hsotg->utmi_clk = devm_clk_get_optional(hsotg->dev, "utmi");
264 	if (IS_ERR(hsotg->utmi_clk))
265 		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->utmi_clk),
266 				     "cannot get utmi clock\n");
267 
268 	/* Regulators */
269 	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
270 		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
271 
272 	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
273 				      hsotg->supplies);
274 	if (ret)
275 		return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n");
276 
277 	return 0;
278 }
279 
280 /**
281  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
282  * DWC_otg driver
283  *
284  * @dev: Platform device
285  *
286  * This routine is called, for example, when the rmmod command is executed. The
287  * device may or may not be electrically present. If it is present, the driver
288  * stops device processing. Any resources used on behalf of this device are
289  * freed.
290  */
291 static int dwc2_driver_remove(struct platform_device *dev)
292 {
293 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
294 	struct dwc2_gregs_backup *gr;
295 	int ret = 0;
296 
297 	gr = &hsotg->gr_backup;
298 
299 	/* Exit Hibernation when driver is removed. */
300 	if (hsotg->hibernated) {
301 		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
302 			ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
303 		else
304 			ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
305 
306 		if (ret)
307 			dev_err(hsotg->dev,
308 				"exit hibernation failed.\n");
309 	}
310 
311 	/* Exit Partial Power Down when driver is removed. */
312 	if (hsotg->in_ppd) {
313 		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
314 		if (ret)
315 			dev_err(hsotg->dev,
316 				"exit partial_power_down failed\n");
317 	}
318 
319 	/* Exit clock gating when driver is removed. */
320 	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
321 	    hsotg->bus_suspended) {
322 		if (dwc2_is_device_mode(hsotg))
323 			dwc2_gadget_exit_clock_gating(hsotg, 0);
324 		else
325 			dwc2_host_exit_clock_gating(hsotg, 0);
326 	}
327 
328 	dwc2_debugfs_exit(hsotg);
329 	if (hsotg->hcd_enabled)
330 		dwc2_hcd_remove(hsotg);
331 	if (hsotg->gadget_enabled)
332 		dwc2_hsotg_remove(hsotg);
333 
334 	dwc2_drd_exit(hsotg);
335 
336 	if (hsotg->params.activate_stm_id_vb_detection)
337 		regulator_disable(hsotg->usb33d);
338 
339 	if (hsotg->ll_hw_enabled)
340 		dwc2_lowlevel_hw_disable(hsotg);
341 
342 	reset_control_assert(hsotg->reset);
343 	reset_control_assert(hsotg->reset_ecc);
344 
345 	return 0;
346 }
347 
348 /**
349  * dwc2_driver_shutdown() - Called on device shutdown
350  *
351  * @dev: Platform device
352  *
353  * In specific conditions (involving usb hubs) dwc2 devices can create a
354  * lot of interrupts, even to the point of overwhelming devices running
355  * at low frequencies. Some devices need to do special clock handling
356  * at shutdown-time which may bring the system clock below the threshold
357  * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
358  * prevents reboots/poweroffs from getting stuck in such cases.
359  */
360 static void dwc2_driver_shutdown(struct platform_device *dev)
361 {
362 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
363 
364 	dwc2_disable_global_interrupts(hsotg);
365 	synchronize_irq(hsotg->irq);
366 }
367 
368 /**
369  * dwc2_check_core_endianness() - Returns true if core and AHB have
370  * opposite endianness.
371  * @hsotg:	Programming view of the DWC_otg controller.
372  */
373 static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
374 {
375 	u32 snpsid;
376 
377 	snpsid = ioread32(hsotg->regs + GSNPSID);
378 	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
379 	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
380 	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
381 		return false;
382 	return true;
383 }
384 
385 /**
386  * dwc2_check_core_version() - Check core version
387  *
388  * @hsotg: Programming view of the DWC_otg controller
389  *
390  */
391 int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
392 {
393 	struct dwc2_hw_params *hw = &hsotg->hw_params;
394 
395 	/*
396 	 * Attempt to ensure this device is really a DWC_otg Controller.
397 	 * Read and verify the GSNPSID register contents. The value should be
398 	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
399 	 */
400 
401 	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
402 	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
403 	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
404 	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
405 		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
406 			hw->snpsid);
407 		return -ENODEV;
408 	}
409 
410 	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
411 		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
412 		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
413 	return 0;
414 }
415 
416 /**
417  * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
418  * driver
419  *
420  * @dev: Platform device
421  *
422  * This routine creates the driver components required to control the device
423  * (core, HCD, and PCD) and initializes the device. The driver components are
424  * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
425  * in the device private data. This allows the driver to access the dwc2_hsotg
426  * structure on subsequent calls to driver methods for this device.
427  */
428 static int dwc2_driver_probe(struct platform_device *dev)
429 {
430 	struct dwc2_hsotg *hsotg;
431 	struct resource *res;
432 	int retval;
433 
434 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
435 	if (!hsotg)
436 		return -ENOMEM;
437 
438 	hsotg->dev = &dev->dev;
439 
440 	/*
441 	 * Use reasonable defaults so platforms don't have to provide these.
442 	 */
443 	if (!dev->dev.dma_mask)
444 		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
445 	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
446 	if (retval) {
447 		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
448 		return retval;
449 	}
450 
451 	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
452 	if (IS_ERR(hsotg->regs))
453 		return PTR_ERR(hsotg->regs);
454 
455 	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
456 		(unsigned long)res->start, hsotg->regs);
457 
458 	retval = dwc2_lowlevel_hw_init(hsotg);
459 	if (retval)
460 		return retval;
461 
462 	spin_lock_init(&hsotg->lock);
463 
464 	hsotg->irq = platform_get_irq(dev, 0);
465 	if (hsotg->irq < 0)
466 		return hsotg->irq;
467 
468 	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
469 		hsotg->irq);
470 	retval = devm_request_irq(hsotg->dev, hsotg->irq,
471 				  dwc2_handle_common_intr, IRQF_SHARED,
472 				  dev_name(hsotg->dev), hsotg);
473 	if (retval)
474 		return retval;
475 
476 	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
477 	if (IS_ERR(hsotg->vbus_supply)) {
478 		retval = PTR_ERR(hsotg->vbus_supply);
479 		hsotg->vbus_supply = NULL;
480 		if (retval != -ENODEV)
481 			return retval;
482 	}
483 
484 	retval = dwc2_lowlevel_hw_enable(hsotg);
485 	if (retval)
486 		return retval;
487 
488 	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
489 
490 	retval = dwc2_get_dr_mode(hsotg);
491 	if (retval)
492 		goto error;
493 
494 	hsotg->need_phy_for_wake =
495 		of_property_read_bool(dev->dev.of_node,
496 				      "snps,need-phy-for-wake");
497 
498 	/*
499 	 * Before performing any core related operations
500 	 * check core version.
501 	 */
502 	retval = dwc2_check_core_version(hsotg);
503 	if (retval)
504 		goto error;
505 
506 	/*
507 	 * Reset before dwc2_get_hwparams() then it could get power-on real
508 	 * reset value form registers.
509 	 */
510 	retval = dwc2_core_reset(hsotg, false);
511 	if (retval)
512 		goto error;
513 
514 	/* Detect config values from hardware */
515 	retval = dwc2_get_hwparams(hsotg);
516 	if (retval)
517 		goto error;
518 
519 	/*
520 	 * For OTG cores, set the force mode bits to reflect the value
521 	 * of dr_mode. Force mode bits should not be touched at any
522 	 * other time after this.
523 	 */
524 	dwc2_force_dr_mode(hsotg);
525 
526 	retval = dwc2_init_params(hsotg);
527 	if (retval)
528 		goto error;
529 
530 	if (hsotg->params.activate_stm_id_vb_detection) {
531 		u32 ggpio;
532 
533 		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
534 		if (IS_ERR(hsotg->usb33d)) {
535 			retval = PTR_ERR(hsotg->usb33d);
536 			dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n");
537 			goto error;
538 		}
539 		retval = regulator_enable(hsotg->usb33d);
540 		if (retval) {
541 			dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n");
542 			goto error;
543 		}
544 
545 		ggpio = dwc2_readl(hsotg, GGPIO);
546 		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
547 		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
548 		dwc2_writel(hsotg, ggpio, GGPIO);
549 
550 		/* ID/VBUS detection startup time */
551 		usleep_range(5000, 7000);
552 	}
553 
554 	retval = dwc2_drd_init(hsotg);
555 	if (retval) {
556 		dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n");
557 		goto error_init;
558 	}
559 
560 	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
561 		retval = dwc2_gadget_init(hsotg);
562 		if (retval)
563 			goto error_drd;
564 		hsotg->gadget_enabled = 1;
565 	}
566 
567 	/*
568 	 * If we need PHY for wakeup we must be wakeup capable.
569 	 * When we have a device that can wake without the PHY we
570 	 * can adjust this condition.
571 	 */
572 	if (hsotg->need_phy_for_wake)
573 		device_set_wakeup_capable(&dev->dev, true);
574 
575 	hsotg->reset_phy_on_wake =
576 		of_property_read_bool(dev->dev.of_node,
577 				      "snps,reset-phy-on-wake");
578 	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
579 		dev_warn(hsotg->dev,
580 			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
581 		hsotg->reset_phy_on_wake = false;
582 	}
583 
584 	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
585 		retval = dwc2_hcd_init(hsotg);
586 		if (retval) {
587 			if (hsotg->gadget_enabled)
588 				dwc2_hsotg_remove(hsotg);
589 			goto error_drd;
590 		}
591 		hsotg->hcd_enabled = 1;
592 	}
593 
594 	platform_set_drvdata(dev, hsotg);
595 	hsotg->hibernated = 0;
596 
597 	dwc2_debugfs_init(hsotg);
598 
599 	/* Gadget code manages lowlevel hw on its own */
600 	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
601 		dwc2_lowlevel_hw_disable(hsotg);
602 
603 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
604 	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
605 	/* Postponed adding a new gadget to the udc class driver list */
606 	if (hsotg->gadget_enabled) {
607 		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
608 		if (retval) {
609 			hsotg->gadget.udc = NULL;
610 			dwc2_hsotg_remove(hsotg);
611 			goto error_debugfs;
612 		}
613 	}
614 #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
615 	return 0;
616 
617 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
618 	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
619 error_debugfs:
620 	dwc2_debugfs_exit(hsotg);
621 	if (hsotg->hcd_enabled)
622 		dwc2_hcd_remove(hsotg);
623 #endif
624 error_drd:
625 	dwc2_drd_exit(hsotg);
626 
627 error_init:
628 	if (hsotg->params.activate_stm_id_vb_detection)
629 		regulator_disable(hsotg->usb33d);
630 error:
631 	if (hsotg->ll_hw_enabled)
632 		dwc2_lowlevel_hw_disable(hsotg);
633 	return retval;
634 }
635 
636 static int __maybe_unused dwc2_suspend(struct device *dev)
637 {
638 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
639 	bool is_device_mode = dwc2_is_device_mode(dwc2);
640 	int ret = 0;
641 
642 	if (is_device_mode)
643 		dwc2_hsotg_suspend(dwc2);
644 
645 	dwc2_drd_suspend(dwc2);
646 
647 	if (dwc2->params.activate_stm_id_vb_detection) {
648 		unsigned long flags;
649 		u32 ggpio, gotgctl;
650 
651 		/*
652 		 * Need to force the mode to the current mode to avoid Mode
653 		 * Mismatch Interrupt when ID detection will be disabled.
654 		 */
655 		dwc2_force_mode(dwc2, !is_device_mode);
656 
657 		spin_lock_irqsave(&dwc2->lock, flags);
658 		gotgctl = dwc2_readl(dwc2, GOTGCTL);
659 		/* bypass debounce filter, enable overrides */
660 		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
661 		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
662 		/* Force A / B session if needed */
663 		if (gotgctl & GOTGCTL_ASESVLD)
664 			gotgctl |= GOTGCTL_AVALOVAL;
665 		if (gotgctl & GOTGCTL_BSESVLD)
666 			gotgctl |= GOTGCTL_BVALOVAL;
667 		dwc2_writel(dwc2, gotgctl, GOTGCTL);
668 		spin_unlock_irqrestore(&dwc2->lock, flags);
669 
670 		ggpio = dwc2_readl(dwc2, GGPIO);
671 		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
672 		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
673 		dwc2_writel(dwc2, ggpio, GGPIO);
674 
675 		regulator_disable(dwc2->usb33d);
676 	}
677 
678 	if (dwc2->ll_hw_enabled &&
679 	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
680 		ret = __dwc2_lowlevel_hw_disable(dwc2);
681 		dwc2->phy_off_for_suspend = true;
682 	}
683 
684 	return ret;
685 }
686 
687 static int __maybe_unused dwc2_resume(struct device *dev)
688 {
689 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
690 	int ret = 0;
691 
692 	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
693 		ret = __dwc2_lowlevel_hw_enable(dwc2);
694 		if (ret)
695 			return ret;
696 	}
697 	dwc2->phy_off_for_suspend = false;
698 
699 	if (dwc2->params.activate_stm_id_vb_detection) {
700 		unsigned long flags;
701 		u32 ggpio, gotgctl;
702 
703 		ret = regulator_enable(dwc2->usb33d);
704 		if (ret)
705 			return ret;
706 
707 		ggpio = dwc2_readl(dwc2, GGPIO);
708 		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
709 		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
710 		dwc2_writel(dwc2, ggpio, GGPIO);
711 
712 		/* ID/VBUS detection startup time */
713 		usleep_range(5000, 7000);
714 
715 		spin_lock_irqsave(&dwc2->lock, flags);
716 		gotgctl = dwc2_readl(dwc2, GOTGCTL);
717 		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
718 		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
719 			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
720 		dwc2_writel(dwc2, gotgctl, GOTGCTL);
721 		spin_unlock_irqrestore(&dwc2->lock, flags);
722 	}
723 
724 	if (!dwc2->role_sw) {
725 		/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
726 		dwc2_force_dr_mode(dwc2);
727 	} else {
728 		dwc2_drd_resume(dwc2);
729 	}
730 
731 	if (dwc2_is_device_mode(dwc2))
732 		ret = dwc2_hsotg_resume(dwc2);
733 
734 	return ret;
735 }
736 
737 static const struct dev_pm_ops dwc2_dev_pm_ops = {
738 	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
739 };
740 
741 static struct platform_driver dwc2_platform_driver = {
742 	.driver = {
743 		.name = dwc2_driver_name,
744 		.of_match_table = dwc2_of_match_table,
745 		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
746 		.pm = &dwc2_dev_pm_ops,
747 	},
748 	.probe = dwc2_driver_probe,
749 	.remove = dwc2_driver_remove,
750 	.shutdown = dwc2_driver_shutdown,
751 };
752 
753 module_platform_driver(dwc2_platform_driver);
754