xref: /openbmc/linux/drivers/usb/dwc2/platform.c (revision 70a59dd8)
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * platform.c - DesignWare HS OTG Controller platform driver
4  *
5  * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. The names of the above-listed copyright holders may not be used
17  *    to endorse or promote products derived from this software without
18  *    specific prior written permission.
19  *
20  * ALTERNATIVELY, this software may be distributed under the terms of the
21  * GNU General Public License ("GPL") as published by the Free Software
22  * Foundation; either version 2 of the License, or (at your option) any
23  * later version.
24  *
25  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36  */
37 
38 #include <linux/kernel.h>
39 #include <linux/module.h>
40 #include <linux/slab.h>
41 #include <linux/clk.h>
42 #include <linux/device.h>
43 #include <linux/dma-mapping.h>
44 #include <linux/of_device.h>
45 #include <linux/mutex.h>
46 #include <linux/platform_device.h>
47 #include <linux/phy/phy.h>
48 #include <linux/platform_data/s3c-hsotg.h>
49 #include <linux/reset.h>
50 
51 #include <linux/usb/of.h>
52 
53 #include "core.h"
54 #include "hcd.h"
55 #include "debug.h"
56 
57 static const char dwc2_driver_name[] = "dwc2";
58 
59 /*
60  * Check the dr_mode against the module configuration and hardware
61  * capabilities.
62  *
63  * The hardware, module, and dr_mode, can each be set to host, device,
64  * or otg. Check that all these values are compatible and adjust the
65  * value of dr_mode if possible.
66  *
67  *                      actual
68  *    HW  MOD dr_mode   dr_mode
69  *  ------------------------------
70  *   HST  HST  any    :  HST
71  *   HST  DEV  any    :  ---
72  *   HST  OTG  any    :  HST
73  *
74  *   DEV  HST  any    :  ---
75  *   DEV  DEV  any    :  DEV
76  *   DEV  OTG  any    :  DEV
77  *
78  *   OTG  HST  any    :  HST
79  *   OTG  DEV  any    :  DEV
80  *   OTG  OTG  any    :  dr_mode
81  */
82 static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
83 {
84 	enum usb_dr_mode mode;
85 
86 	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
87 	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
88 		hsotg->dr_mode = USB_DR_MODE_OTG;
89 
90 	mode = hsotg->dr_mode;
91 
92 	if (dwc2_hw_is_device(hsotg)) {
93 		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
94 			dev_err(hsotg->dev,
95 				"Controller does not support host mode.\n");
96 			return -EINVAL;
97 		}
98 		mode = USB_DR_MODE_PERIPHERAL;
99 	} else if (dwc2_hw_is_host(hsotg)) {
100 		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
101 			dev_err(hsotg->dev,
102 				"Controller does not support device mode.\n");
103 			return -EINVAL;
104 		}
105 		mode = USB_DR_MODE_HOST;
106 	} else {
107 		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
108 			mode = USB_DR_MODE_HOST;
109 		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
110 			mode = USB_DR_MODE_PERIPHERAL;
111 	}
112 
113 	if (mode != hsotg->dr_mode) {
114 		dev_warn(hsotg->dev,
115 			 "Configuration mismatch. dr_mode forced to %s\n",
116 			mode == USB_DR_MODE_HOST ? "host" : "device");
117 
118 		hsotg->dr_mode = mode;
119 	}
120 
121 	return 0;
122 }
123 
124 static void __dwc2_disable_regulators(void *data)
125 {
126 	struct dwc2_hsotg *hsotg = data;
127 
128 	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
129 }
130 
131 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
132 {
133 	struct platform_device *pdev = to_platform_device(hsotg->dev);
134 	int ret;
135 
136 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
137 				    hsotg->supplies);
138 	if (ret)
139 		return ret;
140 
141 	ret = devm_add_action_or_reset(&pdev->dev,
142 				       __dwc2_disable_regulators, hsotg);
143 	if (ret)
144 		return ret;
145 
146 	if (hsotg->clk) {
147 		ret = clk_prepare_enable(hsotg->clk);
148 		if (ret)
149 			return ret;
150 	}
151 
152 	if (hsotg->uphy) {
153 		ret = usb_phy_init(hsotg->uphy);
154 	} else if (hsotg->plat && hsotg->plat->phy_init) {
155 		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
156 	} else {
157 		ret = phy_power_on(hsotg->phy);
158 		if (ret == 0)
159 			ret = phy_init(hsotg->phy);
160 	}
161 
162 	return ret;
163 }
164 
165 /**
166  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
167  * @hsotg: The driver state
168  *
169  * A wrapper for platform code responsible for controlling
170  * low-level USB platform resources (phy, clock, regulators)
171  */
172 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
173 {
174 	int ret = __dwc2_lowlevel_hw_enable(hsotg);
175 
176 	if (ret == 0)
177 		hsotg->ll_hw_enabled = true;
178 	return ret;
179 }
180 
181 static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
182 {
183 	struct platform_device *pdev = to_platform_device(hsotg->dev);
184 	int ret = 0;
185 
186 	if (hsotg->uphy) {
187 		usb_phy_shutdown(hsotg->uphy);
188 	} else if (hsotg->plat && hsotg->plat->phy_exit) {
189 		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
190 	} else {
191 		ret = phy_exit(hsotg->phy);
192 		if (ret == 0)
193 			ret = phy_power_off(hsotg->phy);
194 	}
195 	if (ret)
196 		return ret;
197 
198 	if (hsotg->clk)
199 		clk_disable_unprepare(hsotg->clk);
200 
201 	return 0;
202 }
203 
204 /**
205  * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
206  * @hsotg: The driver state
207  *
208  * A wrapper for platform code responsible for controlling
209  * low-level USB platform resources (phy, clock, regulators)
210  */
211 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
212 {
213 	int ret = __dwc2_lowlevel_hw_disable(hsotg);
214 
215 	if (ret == 0)
216 		hsotg->ll_hw_enabled = false;
217 	return ret;
218 }
219 
220 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
221 {
222 	int i, ret;
223 
224 	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
225 	if (IS_ERR(hsotg->reset)) {
226 		ret = PTR_ERR(hsotg->reset);
227 		dev_err(hsotg->dev, "error getting reset control %d\n", ret);
228 		return ret;
229 	}
230 
231 	reset_control_deassert(hsotg->reset);
232 
233 	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
234 	if (IS_ERR(hsotg->reset_ecc)) {
235 		ret = PTR_ERR(hsotg->reset_ecc);
236 		dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
237 		return ret;
238 	}
239 
240 	reset_control_deassert(hsotg->reset_ecc);
241 
242 	/*
243 	 * Attempt to find a generic PHY, then look for an old style
244 	 * USB PHY and then fall back to pdata
245 	 */
246 	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
247 	if (IS_ERR(hsotg->phy)) {
248 		ret = PTR_ERR(hsotg->phy);
249 		switch (ret) {
250 		case -ENODEV:
251 		case -ENOSYS:
252 			hsotg->phy = NULL;
253 			break;
254 		case -EPROBE_DEFER:
255 			return ret;
256 		default:
257 			dev_err(hsotg->dev, "error getting phy %d\n", ret);
258 			return ret;
259 		}
260 	}
261 
262 	if (!hsotg->phy) {
263 		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
264 		if (IS_ERR(hsotg->uphy)) {
265 			ret = PTR_ERR(hsotg->uphy);
266 			switch (ret) {
267 			case -ENODEV:
268 			case -ENXIO:
269 				hsotg->uphy = NULL;
270 				break;
271 			case -EPROBE_DEFER:
272 				return ret;
273 			default:
274 				dev_err(hsotg->dev, "error getting usb phy %d\n",
275 					ret);
276 				return ret;
277 			}
278 		}
279 	}
280 
281 	hsotg->plat = dev_get_platdata(hsotg->dev);
282 
283 	/* Clock */
284 	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
285 	if (IS_ERR(hsotg->clk)) {
286 		dev_err(hsotg->dev, "cannot get otg clock\n");
287 		return PTR_ERR(hsotg->clk);
288 	}
289 
290 	/* Regulators */
291 	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
292 		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
293 
294 	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
295 				      hsotg->supplies);
296 	if (ret) {
297 		if (ret != -EPROBE_DEFER)
298 			dev_err(hsotg->dev, "failed to request supplies: %d\n",
299 				ret);
300 		return ret;
301 	}
302 	return 0;
303 }
304 
305 /**
306  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
307  * DWC_otg driver
308  *
309  * @dev: Platform device
310  *
311  * This routine is called, for example, when the rmmod command is executed. The
312  * device may or may not be electrically present. If it is present, the driver
313  * stops device processing. Any resources used on behalf of this device are
314  * freed.
315  */
316 static int dwc2_driver_remove(struct platform_device *dev)
317 {
318 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
319 
320 	dwc2_debugfs_exit(hsotg);
321 	if (hsotg->hcd_enabled)
322 		dwc2_hcd_remove(hsotg);
323 	if (hsotg->gadget_enabled)
324 		dwc2_hsotg_remove(hsotg);
325 
326 	dwc2_drd_exit(hsotg);
327 
328 	if (hsotg->params.activate_stm_id_vb_detection)
329 		regulator_disable(hsotg->usb33d);
330 
331 	if (hsotg->ll_hw_enabled)
332 		dwc2_lowlevel_hw_disable(hsotg);
333 
334 	reset_control_assert(hsotg->reset);
335 	reset_control_assert(hsotg->reset_ecc);
336 
337 	return 0;
338 }
339 
340 /**
341  * dwc2_driver_shutdown() - Called on device shutdown
342  *
343  * @dev: Platform device
344  *
345  * In specific conditions (involving usb hubs) dwc2 devices can create a
346  * lot of interrupts, even to the point of overwhelming devices running
347  * at low frequencies. Some devices need to do special clock handling
348  * at shutdown-time which may bring the system clock below the threshold
349  * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
350  * prevents reboots/poweroffs from getting stuck in such cases.
351  */
352 static void dwc2_driver_shutdown(struct platform_device *dev)
353 {
354 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
355 
356 	dwc2_disable_global_interrupts(hsotg);
357 	synchronize_irq(hsotg->irq);
358 }
359 
360 /**
361  * dwc2_check_core_endianness() - Returns true if core and AHB have
362  * opposite endianness.
363  * @hsotg:	Programming view of the DWC_otg controller.
364  */
365 static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
366 {
367 	u32 snpsid;
368 
369 	snpsid = ioread32(hsotg->regs + GSNPSID);
370 	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
371 	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
372 	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
373 		return false;
374 	return true;
375 }
376 
377 /**
378  * Check core version
379  *
380  * @hsotg: Programming view of the DWC_otg controller
381  *
382  */
383 int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
384 {
385 	struct dwc2_hw_params *hw = &hsotg->hw_params;
386 
387 	/*
388 	 * Attempt to ensure this device is really a DWC_otg Controller.
389 	 * Read and verify the GSNPSID register contents. The value should be
390 	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
391 	 */
392 
393 	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
394 	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
395 	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
396 	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
397 		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
398 			hw->snpsid);
399 		return -ENODEV;
400 	}
401 
402 	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
403 		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
404 		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
405 	return 0;
406 }
407 
408 /**
409  * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
410  * driver
411  *
412  * @dev: Platform device
413  *
414  * This routine creates the driver components required to control the device
415  * (core, HCD, and PCD) and initializes the device. The driver components are
416  * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
417  * in the device private data. This allows the driver to access the dwc2_hsotg
418  * structure on subsequent calls to driver methods for this device.
419  */
420 static int dwc2_driver_probe(struct platform_device *dev)
421 {
422 	struct dwc2_hsotg *hsotg;
423 	struct resource *res;
424 	int retval;
425 
426 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
427 	if (!hsotg)
428 		return -ENOMEM;
429 
430 	hsotg->dev = &dev->dev;
431 
432 	/*
433 	 * Use reasonable defaults so platforms don't have to provide these.
434 	 */
435 	if (!dev->dev.dma_mask)
436 		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
437 	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
438 	if (retval) {
439 		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
440 		return retval;
441 	}
442 
443 	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
444 	if (IS_ERR(hsotg->regs))
445 		return PTR_ERR(hsotg->regs);
446 
447 	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
448 		(unsigned long)res->start, hsotg->regs);
449 
450 	retval = dwc2_lowlevel_hw_init(hsotg);
451 	if (retval)
452 		return retval;
453 
454 	spin_lock_init(&hsotg->lock);
455 
456 	hsotg->irq = platform_get_irq(dev, 0);
457 	if (hsotg->irq < 0)
458 		return hsotg->irq;
459 
460 	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
461 		hsotg->irq);
462 	retval = devm_request_irq(hsotg->dev, hsotg->irq,
463 				  dwc2_handle_common_intr, IRQF_SHARED,
464 				  dev_name(hsotg->dev), hsotg);
465 	if (retval)
466 		return retval;
467 
468 	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
469 	if (IS_ERR(hsotg->vbus_supply)) {
470 		retval = PTR_ERR(hsotg->vbus_supply);
471 		hsotg->vbus_supply = NULL;
472 		if (retval != -ENODEV)
473 			return retval;
474 	}
475 
476 	retval = dwc2_lowlevel_hw_enable(hsotg);
477 	if (retval)
478 		return retval;
479 
480 	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
481 
482 	retval = dwc2_get_dr_mode(hsotg);
483 	if (retval)
484 		goto error;
485 
486 	hsotg->need_phy_for_wake =
487 		of_property_read_bool(dev->dev.of_node,
488 				      "snps,need-phy-for-wake");
489 
490 	/*
491 	 * Before performing any core related operations
492 	 * check core version.
493 	 */
494 	retval = dwc2_check_core_version(hsotg);
495 	if (retval)
496 		goto error;
497 
498 	/*
499 	 * Reset before dwc2_get_hwparams() then it could get power-on real
500 	 * reset value form registers.
501 	 */
502 	retval = dwc2_core_reset(hsotg, false);
503 	if (retval)
504 		goto error;
505 
506 	/* Detect config values from hardware */
507 	retval = dwc2_get_hwparams(hsotg);
508 	if (retval)
509 		goto error;
510 
511 	/*
512 	 * For OTG cores, set the force mode bits to reflect the value
513 	 * of dr_mode. Force mode bits should not be touched at any
514 	 * other time after this.
515 	 */
516 	dwc2_force_dr_mode(hsotg);
517 
518 	retval = dwc2_init_params(hsotg);
519 	if (retval)
520 		goto error;
521 
522 	if (hsotg->params.activate_stm_id_vb_detection) {
523 		u32 ggpio;
524 
525 		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
526 		if (IS_ERR(hsotg->usb33d)) {
527 			retval = PTR_ERR(hsotg->usb33d);
528 			if (retval != -EPROBE_DEFER)
529 				dev_err(hsotg->dev,
530 					"failed to request usb33d supply: %d\n",
531 					retval);
532 			goto error;
533 		}
534 		retval = regulator_enable(hsotg->usb33d);
535 		if (retval) {
536 			dev_err(hsotg->dev,
537 				"failed to enable usb33d supply: %d\n", retval);
538 			goto error;
539 		}
540 
541 		ggpio = dwc2_readl(hsotg, GGPIO);
542 		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
543 		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
544 		dwc2_writel(hsotg, ggpio, GGPIO);
545 	}
546 
547 	retval = dwc2_drd_init(hsotg);
548 	if (retval) {
549 		if (retval != -EPROBE_DEFER)
550 			dev_err(hsotg->dev, "failed to initialize dual-role\n");
551 		goto error_init;
552 	}
553 
554 	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
555 		retval = dwc2_gadget_init(hsotg);
556 		if (retval)
557 			goto error_drd;
558 		hsotg->gadget_enabled = 1;
559 	}
560 
561 	/*
562 	 * If we need PHY for wakeup we must be wakeup capable.
563 	 * When we have a device that can wake without the PHY we
564 	 * can adjust this condition.
565 	 */
566 	if (hsotg->need_phy_for_wake)
567 		device_set_wakeup_capable(&dev->dev, true);
568 
569 	hsotg->reset_phy_on_wake =
570 		of_property_read_bool(dev->dev.of_node,
571 				      "snps,reset-phy-on-wake");
572 	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
573 		dev_warn(hsotg->dev,
574 			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
575 		hsotg->reset_phy_on_wake = false;
576 	}
577 
578 	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
579 		retval = dwc2_hcd_init(hsotg);
580 		if (retval) {
581 			if (hsotg->gadget_enabled)
582 				dwc2_hsotg_remove(hsotg);
583 			goto error_drd;
584 		}
585 		hsotg->hcd_enabled = 1;
586 	}
587 
588 	platform_set_drvdata(dev, hsotg);
589 	hsotg->hibernated = 0;
590 
591 	dwc2_debugfs_init(hsotg);
592 
593 	/* Gadget code manages lowlevel hw on its own */
594 	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
595 		dwc2_lowlevel_hw_disable(hsotg);
596 
597 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
598 	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
599 	/* Postponed adding a new gadget to the udc class driver list */
600 	if (hsotg->gadget_enabled) {
601 		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
602 		if (retval) {
603 			hsotg->gadget.udc = NULL;
604 			dwc2_hsotg_remove(hsotg);
605 			goto error_debugfs;
606 		}
607 	}
608 #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
609 	return 0;
610 
611 error_debugfs:
612 	dwc2_debugfs_exit(hsotg);
613 	if (hsotg->hcd_enabled)
614 		dwc2_hcd_remove(hsotg);
615 error_drd:
616 	dwc2_drd_exit(hsotg);
617 
618 error_init:
619 	if (hsotg->params.activate_stm_id_vb_detection)
620 		regulator_disable(hsotg->usb33d);
621 error:
622 	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
623 		dwc2_lowlevel_hw_disable(hsotg);
624 	return retval;
625 }
626 
627 static int __maybe_unused dwc2_suspend(struct device *dev)
628 {
629 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
630 	bool is_device_mode = dwc2_is_device_mode(dwc2);
631 	int ret = 0;
632 
633 	if (is_device_mode)
634 		dwc2_hsotg_suspend(dwc2);
635 
636 	dwc2_drd_suspend(dwc2);
637 
638 	if (dwc2->params.activate_stm_id_vb_detection) {
639 		unsigned long flags;
640 		u32 ggpio, gotgctl;
641 
642 		/*
643 		 * Need to force the mode to the current mode to avoid Mode
644 		 * Mismatch Interrupt when ID detection will be disabled.
645 		 */
646 		dwc2_force_mode(dwc2, !is_device_mode);
647 
648 		spin_lock_irqsave(&dwc2->lock, flags);
649 		gotgctl = dwc2_readl(dwc2, GOTGCTL);
650 		/* bypass debounce filter, enable overrides */
651 		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
652 		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
653 		/* Force A / B session if needed */
654 		if (gotgctl & GOTGCTL_ASESVLD)
655 			gotgctl |= GOTGCTL_AVALOVAL;
656 		if (gotgctl & GOTGCTL_BSESVLD)
657 			gotgctl |= GOTGCTL_BVALOVAL;
658 		dwc2_writel(dwc2, gotgctl, GOTGCTL);
659 		spin_unlock_irqrestore(&dwc2->lock, flags);
660 
661 		ggpio = dwc2_readl(dwc2, GGPIO);
662 		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
663 		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
664 		dwc2_writel(dwc2, ggpio, GGPIO);
665 
666 		regulator_disable(dwc2->usb33d);
667 	}
668 
669 	if (dwc2->ll_hw_enabled &&
670 	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
671 		ret = __dwc2_lowlevel_hw_disable(dwc2);
672 		dwc2->phy_off_for_suspend = true;
673 	}
674 
675 	return ret;
676 }
677 
678 static int __maybe_unused dwc2_resume(struct device *dev)
679 {
680 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
681 	int ret = 0;
682 
683 	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
684 		ret = __dwc2_lowlevel_hw_enable(dwc2);
685 		if (ret)
686 			return ret;
687 	}
688 	dwc2->phy_off_for_suspend = false;
689 
690 	if (dwc2->params.activate_stm_id_vb_detection) {
691 		unsigned long flags;
692 		u32 ggpio, gotgctl;
693 
694 		ret = regulator_enable(dwc2->usb33d);
695 		if (ret)
696 			return ret;
697 
698 		ggpio = dwc2_readl(dwc2, GGPIO);
699 		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
700 		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
701 		dwc2_writel(dwc2, ggpio, GGPIO);
702 
703 		/* ID/VBUS detection startup time */
704 		usleep_range(5000, 7000);
705 
706 		spin_lock_irqsave(&dwc2->lock, flags);
707 		gotgctl = dwc2_readl(dwc2, GOTGCTL);
708 		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
709 		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
710 			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
711 		dwc2_writel(dwc2, gotgctl, GOTGCTL);
712 		spin_unlock_irqrestore(&dwc2->lock, flags);
713 	}
714 
715 	/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
716 	dwc2_force_dr_mode(dwc2);
717 
718 	dwc2_drd_resume(dwc2);
719 
720 	if (dwc2_is_device_mode(dwc2))
721 		ret = dwc2_hsotg_resume(dwc2);
722 
723 	return ret;
724 }
725 
726 static const struct dev_pm_ops dwc2_dev_pm_ops = {
727 	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
728 };
729 
730 static struct platform_driver dwc2_platform_driver = {
731 	.driver = {
732 		.name = dwc2_driver_name,
733 		.of_match_table = dwc2_of_match_table,
734 		.pm = &dwc2_dev_pm_ops,
735 	},
736 	.probe = dwc2_driver_probe,
737 	.remove = dwc2_driver_remove,
738 	.shutdown = dwc2_driver_shutdown,
739 };
740 
741 module_platform_driver(dwc2_platform_driver);
742 
743 MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
744 MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
745 MODULE_LICENSE("Dual BSD/GPL");
746