xref: /openbmc/linux/drivers/usb/dwc2/platform.c (revision 2c684d89)
1 /*
2  * platform.c - DesignWare HS OTG Controller platform driver
3  *
4  * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions, and the following disclaimer,
11  *    without modification.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The names of the above-listed copyright holders may not be used
16  *    to endorse or promote products derived from this software without
17  *    specific prior written permission.
18  *
19  * ALTERNATIVELY, this software may be distributed under the terms of the
20  * GNU General Public License ("GPL") as published by the Free Software
21  * Foundation; either version 2 of the License, or (at your option) any
22  * later version.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
25  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
26  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
28  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
29  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
30  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
31  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
32  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
33  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35  */
36 
37 #include <linux/kernel.h>
38 #include <linux/module.h>
39 #include <linux/slab.h>
40 #include <linux/clk.h>
41 #include <linux/device.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/of_device.h>
44 #include <linux/mutex.h>
45 #include <linux/platform_device.h>
46 #include <linux/phy/phy.h>
47 #include <linux/platform_data/s3c-hsotg.h>
48 
49 #include <linux/usb/of.h>
50 
51 #include "core.h"
52 #include "hcd.h"
53 #include "debug.h"
54 
55 static const char dwc2_driver_name[] = "dwc2";
56 
57 static const struct dwc2_core_params params_bcm2835 = {
58 	.otg_cap			= 0,	/* HNP/SRP capable */
59 	.otg_ver			= 0,	/* 1.3 */
60 	.dma_enable			= 1,
61 	.dma_desc_enable		= 0,
62 	.speed				= 0,	/* High Speed */
63 	.enable_dynamic_fifo		= 1,
64 	.en_multiple_tx_fifo		= 1,
65 	.host_rx_fifo_size		= 774,	/* 774 DWORDs */
66 	.host_nperio_tx_fifo_size	= 256,	/* 256 DWORDs */
67 	.host_perio_tx_fifo_size	= 512,	/* 512 DWORDs */
68 	.max_transfer_size		= 65535,
69 	.max_packet_count		= 511,
70 	.host_channels			= 8,
71 	.phy_type			= 1,	/* UTMI */
72 	.phy_utmi_width			= 8,	/* 8 bits */
73 	.phy_ulpi_ddr			= 0,	/* Single */
74 	.phy_ulpi_ext_vbus		= 0,
75 	.i2c_enable			= 0,
76 	.ulpi_fs_ls			= 0,
77 	.host_support_fs_ls_low_power	= 0,
78 	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
79 	.ts_dline			= 0,
80 	.reload_ctl			= 0,
81 	.ahbcfg				= 0x10,
82 	.uframe_sched			= 0,
83 	.external_id_pin_ctl		= -1,
84 	.hibernation			= -1,
85 };
86 
87 static const struct dwc2_core_params params_rk3066 = {
88 	.otg_cap			= 2,	/* non-HNP/non-SRP */
89 	.otg_ver			= -1,
90 	.dma_enable			= -1,
91 	.dma_desc_enable		= 0,
92 	.speed				= -1,
93 	.enable_dynamic_fifo		= 1,
94 	.en_multiple_tx_fifo		= -1,
95 	.host_rx_fifo_size		= 520,	/* 520 DWORDs */
96 	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
97 	.host_perio_tx_fifo_size	= 256,	/* 256 DWORDs */
98 	.max_transfer_size		= 65535,
99 	.max_packet_count		= -1,
100 	.host_channels			= -1,
101 	.phy_type			= -1,
102 	.phy_utmi_width			= -1,
103 	.phy_ulpi_ddr			= -1,
104 	.phy_ulpi_ext_vbus		= -1,
105 	.i2c_enable			= -1,
106 	.ulpi_fs_ls			= -1,
107 	.host_support_fs_ls_low_power	= -1,
108 	.host_ls_low_power_phy_clk	= -1,
109 	.ts_dline			= -1,
110 	.reload_ctl			= -1,
111 	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
112 					  GAHBCFG_HBSTLEN_SHIFT,
113 	.uframe_sched			= -1,
114 	.external_id_pin_ctl		= -1,
115 	.hibernation			= -1,
116 };
117 
118 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
119 {
120 	struct platform_device *pdev = to_platform_device(hsotg->dev);
121 	int ret;
122 
123 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
124 				    hsotg->supplies);
125 	if (ret)
126 		return ret;
127 
128 	if (hsotg->clk) {
129 		ret = clk_prepare_enable(hsotg->clk);
130 		if (ret)
131 			return ret;
132 	}
133 
134 	if (hsotg->uphy)
135 		ret = usb_phy_init(hsotg->uphy);
136 	else if (hsotg->plat && hsotg->plat->phy_init)
137 		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
138 	else {
139 		ret = phy_power_on(hsotg->phy);
140 		if (ret == 0)
141 			ret = phy_init(hsotg->phy);
142 	}
143 
144 	return ret;
145 }
146 
147 /**
148  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
149  * @hsotg: The driver state
150  *
151  * A wrapper for platform code responsible for controlling
152  * low-level USB platform resources (phy, clock, regulators)
153  */
154 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
155 {
156 	int ret = __dwc2_lowlevel_hw_enable(hsotg);
157 
158 	if (ret == 0)
159 		hsotg->ll_hw_enabled = true;
160 	return ret;
161 }
162 
163 static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
164 {
165 	struct platform_device *pdev = to_platform_device(hsotg->dev);
166 	int ret = 0;
167 
168 	if (hsotg->uphy)
169 		usb_phy_shutdown(hsotg->uphy);
170 	else if (hsotg->plat && hsotg->plat->phy_exit)
171 		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
172 	else {
173 		ret = phy_exit(hsotg->phy);
174 		if (ret == 0)
175 			ret = phy_power_off(hsotg->phy);
176 	}
177 	if (ret)
178 		return ret;
179 
180 	if (hsotg->clk)
181 		clk_disable_unprepare(hsotg->clk);
182 
183 	ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
184 				     hsotg->supplies);
185 
186 	return ret;
187 }
188 
189 /**
190  * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
191  * @hsotg: The driver state
192  *
193  * A wrapper for platform code responsible for controlling
194  * low-level USB platform resources (phy, clock, regulators)
195  */
196 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
197 {
198 	int ret = __dwc2_lowlevel_hw_disable(hsotg);
199 
200 	if (ret == 0)
201 		hsotg->ll_hw_enabled = false;
202 	return ret;
203 }
204 
205 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
206 {
207 	int i, ret;
208 
209 	/* Set default UTMI width */
210 	hsotg->phyif = GUSBCFG_PHYIF16;
211 
212 	/*
213 	 * Attempt to find a generic PHY, then look for an old style
214 	 * USB PHY and then fall back to pdata
215 	 */
216 	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
217 	if (IS_ERR(hsotg->phy)) {
218 		ret = PTR_ERR(hsotg->phy);
219 		switch (ret) {
220 		case -ENODEV:
221 		case -ENOSYS:
222 			hsotg->phy = NULL;
223 			break;
224 		case -EPROBE_DEFER:
225 			return ret;
226 		default:
227 			dev_err(hsotg->dev, "error getting phy %d\n", ret);
228 			return ret;
229 		}
230 	}
231 
232 	if (!hsotg->phy) {
233 		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
234 		if (IS_ERR(hsotg->uphy)) {
235 			ret = PTR_ERR(hsotg->uphy);
236 			switch (ret) {
237 			case -ENODEV:
238 			case -ENXIO:
239 				hsotg->uphy = NULL;
240 				break;
241 			case -EPROBE_DEFER:
242 				return ret;
243 			default:
244 				dev_err(hsotg->dev, "error getting usb phy %d\n",
245 					ret);
246 				return ret;
247 			}
248 		}
249 	}
250 
251 	hsotg->plat = dev_get_platdata(hsotg->dev);
252 
253 	if (hsotg->phy) {
254 		/*
255 		 * If using the generic PHY framework, check if the PHY bus
256 		 * width is 8-bit and set the phyif appropriately.
257 		 */
258 		if (phy_get_bus_width(hsotg->phy) == 8)
259 			hsotg->phyif = GUSBCFG_PHYIF8;
260 	}
261 
262 	/* Clock */
263 	hsotg->clk = devm_clk_get(hsotg->dev, "otg");
264 	if (IS_ERR(hsotg->clk)) {
265 		hsotg->clk = NULL;
266 		dev_dbg(hsotg->dev, "cannot get otg clock\n");
267 	}
268 
269 	/* Regulators */
270 	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
271 		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
272 
273 	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
274 				      hsotg->supplies);
275 	if (ret) {
276 		dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
277 		return ret;
278 	}
279 	return 0;
280 }
281 
282 /**
283  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
284  * DWC_otg driver
285  *
286  * @dev: Platform device
287  *
288  * This routine is called, for example, when the rmmod command is executed. The
289  * device may or may not be electrically present. If it is present, the driver
290  * stops device processing. Any resources used on behalf of this device are
291  * freed.
292  */
293 static int dwc2_driver_remove(struct platform_device *dev)
294 {
295 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
296 
297 	dwc2_debugfs_exit(hsotg);
298 	if (hsotg->hcd_enabled)
299 		dwc2_hcd_remove(hsotg);
300 	if (hsotg->gadget_enabled)
301 		dwc2_hsotg_remove(hsotg);
302 
303 	if (hsotg->ll_hw_enabled)
304 		dwc2_lowlevel_hw_disable(hsotg);
305 
306 	return 0;
307 }
308 
309 static const struct of_device_id dwc2_of_match_table[] = {
310 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
311 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
312 	{ .compatible = "snps,dwc2", .data = NULL },
313 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
314 	{},
315 };
316 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
317 
318 /**
319  * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
320  * driver
321  *
322  * @dev: Platform device
323  *
324  * This routine creates the driver components required to control the device
325  * (core, HCD, and PCD) and initializes the device. The driver components are
326  * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
327  * in the device private data. This allows the driver to access the dwc2_hsotg
328  * structure on subsequent calls to driver methods for this device.
329  */
330 static int dwc2_driver_probe(struct platform_device *dev)
331 {
332 	const struct of_device_id *match;
333 	const struct dwc2_core_params *params;
334 	struct dwc2_core_params defparams;
335 	struct dwc2_hsotg *hsotg;
336 	struct resource *res;
337 	int retval;
338 	int irq;
339 
340 	match = of_match_device(dwc2_of_match_table, &dev->dev);
341 	if (match && match->data) {
342 		params = match->data;
343 	} else {
344 		/* Default all params to autodetect */
345 		dwc2_set_all_params(&defparams, -1);
346 		params = &defparams;
347 
348 		/*
349 		 * Disable descriptor dma mode by default as the HW can support
350 		 * it, but does not support it for SPLIT transactions.
351 		 */
352 		defparams.dma_desc_enable = 0;
353 	}
354 
355 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
356 	if (!hsotg)
357 		return -ENOMEM;
358 
359 	hsotg->dev = &dev->dev;
360 
361 	/*
362 	 * Use reasonable defaults so platforms don't have to provide these.
363 	 */
364 	if (!dev->dev.dma_mask)
365 		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
366 	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
367 	if (retval)
368 		return retval;
369 
370 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
371 	hsotg->regs = devm_ioremap_resource(&dev->dev, res);
372 	if (IS_ERR(hsotg->regs))
373 		return PTR_ERR(hsotg->regs);
374 
375 	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
376 		(unsigned long)res->start, hsotg->regs);
377 
378 	hsotg->dr_mode = usb_get_dr_mode(&dev->dev);
379 	if (IS_ENABLED(CONFIG_USB_DWC2_HOST) &&
380 			hsotg->dr_mode != USB_DR_MODE_HOST) {
381 		hsotg->dr_mode = USB_DR_MODE_HOST;
382 		dev_warn(hsotg->dev,
383 			"Configuration mismatch. Forcing host mode\n");
384 	} else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) &&
385 			hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
386 		hsotg->dr_mode = USB_DR_MODE_PERIPHERAL;
387 		dev_warn(hsotg->dev,
388 			"Configuration mismatch. Forcing peripheral mode\n");
389 	}
390 
391 	retval = dwc2_lowlevel_hw_init(hsotg);
392 	if (retval)
393 		return retval;
394 
395 	spin_lock_init(&hsotg->lock);
396 
397 	hsotg->core_params = devm_kzalloc(&dev->dev,
398 				sizeof(*hsotg->core_params), GFP_KERNEL);
399 	if (!hsotg->core_params)
400 		return -ENOMEM;
401 
402 	dwc2_set_all_params(hsotg->core_params, -1);
403 
404 	irq = platform_get_irq(dev, 0);
405 	if (irq < 0) {
406 		dev_err(&dev->dev, "missing IRQ resource\n");
407 		return irq;
408 	}
409 
410 	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
411 		irq);
412 	retval = devm_request_irq(hsotg->dev, irq,
413 				  dwc2_handle_common_intr, IRQF_SHARED,
414 				  dev_name(hsotg->dev), hsotg);
415 	if (retval)
416 		return retval;
417 
418 	retval = dwc2_lowlevel_hw_enable(hsotg);
419 	if (retval)
420 		return retval;
421 
422 	/* Detect config values from hardware */
423 	retval = dwc2_get_hwparams(hsotg);
424 	if (retval)
425 		goto error;
426 
427 	/* Validate parameter values */
428 	dwc2_set_parameters(hsotg, params);
429 
430 	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
431 		retval = dwc2_gadget_init(hsotg, irq);
432 		if (retval)
433 			goto error;
434 		hsotg->gadget_enabled = 1;
435 	}
436 
437 	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
438 		retval = dwc2_hcd_init(hsotg, irq);
439 		if (retval) {
440 			if (hsotg->gadget_enabled)
441 				dwc2_hsotg_remove(hsotg);
442 			goto error;
443 		}
444 		hsotg->hcd_enabled = 1;
445 	}
446 
447 	platform_set_drvdata(dev, hsotg);
448 
449 	dwc2_debugfs_init(hsotg);
450 
451 	/* Gadget code manages lowlevel hw on its own */
452 	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
453 		dwc2_lowlevel_hw_disable(hsotg);
454 
455 	return 0;
456 
457 error:
458 	dwc2_lowlevel_hw_disable(hsotg);
459 	return retval;
460 }
461 
462 static int __maybe_unused dwc2_suspend(struct device *dev)
463 {
464 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
465 	int ret = 0;
466 
467 	if (dwc2_is_device_mode(dwc2))
468 		dwc2_hsotg_suspend(dwc2);
469 
470 	if (dwc2->ll_hw_enabled)
471 		ret = __dwc2_lowlevel_hw_disable(dwc2);
472 
473 	return ret;
474 }
475 
476 static int __maybe_unused dwc2_resume(struct device *dev)
477 {
478 	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
479 	int ret = 0;
480 
481 	if (dwc2->ll_hw_enabled) {
482 		ret = __dwc2_lowlevel_hw_enable(dwc2);
483 		if (ret)
484 			return ret;
485 	}
486 
487 	if (dwc2_is_device_mode(dwc2))
488 		ret = dwc2_hsotg_resume(dwc2);
489 
490 	return ret;
491 }
492 
493 static const struct dev_pm_ops dwc2_dev_pm_ops = {
494 	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
495 };
496 
497 static struct platform_driver dwc2_platform_driver = {
498 	.driver = {
499 		.name = dwc2_driver_name,
500 		.of_match_table = dwc2_of_match_table,
501 		.pm = &dwc2_dev_pm_ops,
502 	},
503 	.probe = dwc2_driver_probe,
504 	.remove = dwc2_driver_remove,
505 };
506 
507 module_platform_driver(dwc2_platform_driver);
508 
509 MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
510 MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
511 MODULE_LICENSE("Dual BSD/GPL");
512