1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * hcd.c - DesignWare HS OTG Controller host-mode routines 4 * 5 * Copyright (C) 2004-2013 Synopsys, Inc. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The names of the above-listed copyright holders may not be used 17 * to endorse or promote products derived from this software without 18 * specific prior written permission. 19 * 20 * ALTERNATIVELY, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") as published by the Free Software 22 * Foundation; either version 2 of the License, or (at your option) any 23 * later version. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * This file contains the core HCD code, and implements the Linux hc_driver 40 * API 41 */ 42 #include <linux/kernel.h> 43 #include <linux/module.h> 44 #include <linux/spinlock.h> 45 #include <linux/interrupt.h> 46 #include <linux/platform_device.h> 47 #include <linux/dma-mapping.h> 48 #include <linux/delay.h> 49 #include <linux/io.h> 50 #include <linux/slab.h> 51 #include <linux/usb.h> 52 53 #include <linux/usb/hcd.h> 54 #include <linux/usb/ch11.h> 55 56 #include "core.h" 57 #include "hcd.h" 58 59 static void dwc2_port_resume(struct dwc2_hsotg *hsotg); 60 61 /* 62 * ========================================================================= 63 * Host Core Layer Functions 64 * ========================================================================= 65 */ 66 67 /** 68 * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, 69 * used in both device and host modes 70 * 71 * @hsotg: Programming view of the DWC_otg controller 72 */ 73 static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) 74 { 75 u32 intmsk; 76 77 /* Clear any pending OTG Interrupts */ 78 dwc2_writel(hsotg, 0xffffffff, GOTGINT); 79 80 /* Clear any pending interrupts */ 81 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 82 83 /* Enable the interrupts in the GINTMSK */ 84 intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; 85 86 if (!hsotg->params.host_dma) 87 intmsk |= GINTSTS_RXFLVL; 88 if (!hsotg->params.external_id_pin_ctl) 89 intmsk |= GINTSTS_CONIDSTSCHNG; 90 91 intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP | 92 GINTSTS_SESSREQINT; 93 94 if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm) 95 intmsk |= GINTSTS_LPMTRANRCVD; 96 97 dwc2_writel(hsotg, intmsk, GINTMSK); 98 } 99 100 static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) 101 { 102 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 103 104 switch (hsotg->hw_params.arch) { 105 case GHWCFG2_EXT_DMA_ARCH: 106 dev_err(hsotg->dev, "External DMA Mode not supported\n"); 107 return -EINVAL; 108 109 case GHWCFG2_INT_DMA_ARCH: 110 dev_dbg(hsotg->dev, "Internal DMA Mode\n"); 111 if (hsotg->params.ahbcfg != -1) { 112 ahbcfg &= GAHBCFG_CTRL_MASK; 113 ahbcfg |= hsotg->params.ahbcfg & 114 ~GAHBCFG_CTRL_MASK; 115 } 116 break; 117 118 case GHWCFG2_SLAVE_ONLY_ARCH: 119 default: 120 dev_dbg(hsotg->dev, "Slave Only Mode\n"); 121 break; 122 } 123 124 if (hsotg->params.host_dma) 125 ahbcfg |= GAHBCFG_DMA_EN; 126 else 127 hsotg->params.dma_desc_enable = false; 128 129 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 130 131 return 0; 132 } 133 134 static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) 135 { 136 u32 usbcfg; 137 138 usbcfg = dwc2_readl(hsotg, GUSBCFG); 139 usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); 140 141 switch (hsotg->hw_params.op_mode) { 142 case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: 143 if (hsotg->params.otg_cap == 144 DWC2_CAP_PARAM_HNP_SRP_CAPABLE) 145 usbcfg |= GUSBCFG_HNPCAP; 146 if (hsotg->params.otg_cap != 147 DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) 148 usbcfg |= GUSBCFG_SRPCAP; 149 break; 150 151 case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: 152 case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: 153 case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: 154 if (hsotg->params.otg_cap != 155 DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) 156 usbcfg |= GUSBCFG_SRPCAP; 157 break; 158 159 case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: 160 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: 161 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: 162 default: 163 break; 164 } 165 166 dwc2_writel(hsotg, usbcfg, GUSBCFG); 167 } 168 169 static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg) 170 { 171 if (hsotg->vbus_supply) 172 return regulator_enable(hsotg->vbus_supply); 173 174 return 0; 175 } 176 177 static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg) 178 { 179 if (hsotg->vbus_supply) 180 return regulator_disable(hsotg->vbus_supply); 181 182 return 0; 183 } 184 185 /** 186 * dwc2_enable_host_interrupts() - Enables the Host mode interrupts 187 * 188 * @hsotg: Programming view of DWC_otg controller 189 */ 190 static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) 191 { 192 u32 intmsk; 193 194 dev_dbg(hsotg->dev, "%s()\n", __func__); 195 196 /* Disable all interrupts */ 197 dwc2_writel(hsotg, 0, GINTMSK); 198 dwc2_writel(hsotg, 0, HAINTMSK); 199 200 /* Enable the common interrupts */ 201 dwc2_enable_common_interrupts(hsotg); 202 203 /* Enable host mode interrupts without disturbing common interrupts */ 204 intmsk = dwc2_readl(hsotg, GINTMSK); 205 intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; 206 dwc2_writel(hsotg, intmsk, GINTMSK); 207 } 208 209 /** 210 * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts 211 * 212 * @hsotg: Programming view of DWC_otg controller 213 */ 214 static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) 215 { 216 u32 intmsk = dwc2_readl(hsotg, GINTMSK); 217 218 /* Disable host mode interrupts without disturbing common interrupts */ 219 intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | 220 GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT); 221 dwc2_writel(hsotg, intmsk, GINTMSK); 222 } 223 224 /* 225 * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size 226 * For system that have a total fifo depth that is smaller than the default 227 * RX + TX fifo size. 228 * 229 * @hsotg: Programming view of DWC_otg controller 230 */ 231 static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) 232 { 233 struct dwc2_core_params *params = &hsotg->params; 234 struct dwc2_hw_params *hw = &hsotg->hw_params; 235 u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; 236 237 total_fifo_size = hw->total_fifo_size; 238 rxfsiz = params->host_rx_fifo_size; 239 nptxfsiz = params->host_nperio_tx_fifo_size; 240 ptxfsiz = params->host_perio_tx_fifo_size; 241 242 /* 243 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth 244 * allocation with support for high bandwidth endpoints. Synopsys 245 * defines MPS(Max Packet size) for a periodic EP=1024, and for 246 * non-periodic as 512. 247 */ 248 if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { 249 /* 250 * For Buffer DMA mode/Scatter Gather DMA mode 251 * 2 * ((Largest Packet size / 4) + 1 + 1) + n 252 * with n = number of host channel. 253 * 2 * ((1024/4) + 2) = 516 254 */ 255 rxfsiz = 516 + hw->host_channels; 256 257 /* 258 * min non-periodic tx fifo depth 259 * 2 * (largest non-periodic USB packet used / 4) 260 * 2 * (512/4) = 256 261 */ 262 nptxfsiz = 256; 263 264 /* 265 * min periodic tx fifo depth 266 * (largest packet size*MC)/4 267 * (1024 * 3)/4 = 768 268 */ 269 ptxfsiz = 768; 270 271 params->host_rx_fifo_size = rxfsiz; 272 params->host_nperio_tx_fifo_size = nptxfsiz; 273 params->host_perio_tx_fifo_size = ptxfsiz; 274 } 275 276 /* 277 * If the summation of RX, NPTX and PTX fifo sizes is still 278 * bigger than the total_fifo_size, then we have a problem. 279 * 280 * We won't be able to allocate as many endpoints. Right now, 281 * we're just printing an error message, but ideally this FIFO 282 * allocation algorithm would be improved in the future. 283 * 284 * FIXME improve this FIFO allocation algorithm. 285 */ 286 if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) 287 dev_err(hsotg->dev, "invalid fifo sizes\n"); 288 } 289 290 static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) 291 { 292 struct dwc2_core_params *params = &hsotg->params; 293 u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz; 294 295 if (!params->enable_dynamic_fifo) 296 return; 297 298 dwc2_calculate_dynamic_fifo(hsotg); 299 300 /* Rx FIFO */ 301 grxfsiz = dwc2_readl(hsotg, GRXFSIZ); 302 dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); 303 grxfsiz &= ~GRXFSIZ_DEPTH_MASK; 304 grxfsiz |= params->host_rx_fifo_size << 305 GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; 306 dwc2_writel(hsotg, grxfsiz, GRXFSIZ); 307 dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", 308 dwc2_readl(hsotg, GRXFSIZ)); 309 310 /* Non-periodic Tx FIFO */ 311 dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", 312 dwc2_readl(hsotg, GNPTXFSIZ)); 313 nptxfsiz = params->host_nperio_tx_fifo_size << 314 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 315 nptxfsiz |= params->host_rx_fifo_size << 316 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 317 dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ); 318 dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", 319 dwc2_readl(hsotg, GNPTXFSIZ)); 320 321 /* Periodic Tx FIFO */ 322 dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", 323 dwc2_readl(hsotg, HPTXFSIZ)); 324 hptxfsiz = params->host_perio_tx_fifo_size << 325 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 326 hptxfsiz |= (params->host_rx_fifo_size + 327 params->host_nperio_tx_fifo_size) << 328 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 329 dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ); 330 dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", 331 dwc2_readl(hsotg, HPTXFSIZ)); 332 333 if (hsotg->params.en_multiple_tx_fifo && 334 hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) { 335 /* 336 * This feature was implemented in 2.91a version 337 * Global DFIFOCFG calculation for Host mode - 338 * include RxFIFO, NPTXFIFO and HPTXFIFO 339 */ 340 dfifocfg = dwc2_readl(hsotg, GDFIFOCFG); 341 dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; 342 dfifocfg |= (params->host_rx_fifo_size + 343 params->host_nperio_tx_fifo_size + 344 params->host_perio_tx_fifo_size) << 345 GDFIFOCFG_EPINFOBASE_SHIFT & 346 GDFIFOCFG_EPINFOBASE_MASK; 347 dwc2_writel(hsotg, dfifocfg, GDFIFOCFG); 348 } 349 } 350 351 /** 352 * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for 353 * the HFIR register according to PHY type and speed 354 * 355 * @hsotg: Programming view of DWC_otg controller 356 * 357 * NOTE: The caller can modify the value of the HFIR register only after the 358 * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) 359 * has been set 360 */ 361 u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) 362 { 363 u32 usbcfg; 364 u32 hprt0; 365 int clock = 60; /* default value */ 366 367 usbcfg = dwc2_readl(hsotg, GUSBCFG); 368 hprt0 = dwc2_readl(hsotg, HPRT0); 369 370 if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && 371 !(usbcfg & GUSBCFG_PHYIF16)) 372 clock = 60; 373 if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type == 374 GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) 375 clock = 48; 376 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 377 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 378 clock = 30; 379 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 380 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) 381 clock = 60; 382 if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 383 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 384 clock = 48; 385 if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && 386 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) 387 clock = 48; 388 if ((usbcfg & GUSBCFG_PHYSEL) && 389 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) 390 clock = 48; 391 392 if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED) 393 /* High speed case */ 394 return 125 * clock - 1; 395 396 /* FS/LS case */ 397 return 1000 * clock - 1; 398 } 399 400 /** 401 * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination 402 * buffer 403 * 404 * @hsotg: Programming view of DWC_otg controller 405 * @dest: Destination buffer for the packet 406 * @bytes: Number of bytes to copy to the destination 407 */ 408 void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) 409 { 410 u32 *data_buf = (u32 *)dest; 411 int word_count = (bytes + 3) / 4; 412 int i; 413 414 /* 415 * Todo: Account for the case where dest is not dword aligned. This 416 * requires reading data from the FIFO into a u32 temp buffer, then 417 * moving it into the data buffer. 418 */ 419 420 dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); 421 422 for (i = 0; i < word_count; i++, data_buf++) 423 *data_buf = dwc2_readl(hsotg, HCFIFO(0)); 424 } 425 426 /** 427 * dwc2_dump_channel_info() - Prints the state of a host channel 428 * 429 * @hsotg: Programming view of DWC_otg controller 430 * @chan: Pointer to the channel to dump 431 * 432 * Must be called with interrupt disabled and spinlock held 433 * 434 * NOTE: This function will be removed once the peripheral controller code 435 * is integrated and the driver is stable 436 */ 437 static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, 438 struct dwc2_host_chan *chan) 439 { 440 #ifdef VERBOSE_DEBUG 441 int num_channels = hsotg->params.host_channels; 442 struct dwc2_qh *qh; 443 u32 hcchar; 444 u32 hcsplt; 445 u32 hctsiz; 446 u32 hc_dma; 447 int i; 448 449 if (!chan) 450 return; 451 452 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 453 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 454 hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num)); 455 hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num)); 456 457 dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); 458 dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", 459 hcchar, hcsplt); 460 dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", 461 hctsiz, hc_dma); 462 dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 463 chan->dev_addr, chan->ep_num, chan->ep_is_in); 464 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 465 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 466 dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); 467 dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); 468 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 469 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 470 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 471 (unsigned long)chan->xfer_dma); 472 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 473 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 474 dev_dbg(hsotg->dev, " NP inactive sched:\n"); 475 list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, 476 qh_list_entry) 477 dev_dbg(hsotg->dev, " %p\n", qh); 478 dev_dbg(hsotg->dev, " NP waiting sched:\n"); 479 list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting, 480 qh_list_entry) 481 dev_dbg(hsotg->dev, " %p\n", qh); 482 dev_dbg(hsotg->dev, " NP active sched:\n"); 483 list_for_each_entry(qh, &hsotg->non_periodic_sched_active, 484 qh_list_entry) 485 dev_dbg(hsotg->dev, " %p\n", qh); 486 dev_dbg(hsotg->dev, " Channels:\n"); 487 for (i = 0; i < num_channels; i++) { 488 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 489 490 dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); 491 } 492 #endif /* VERBOSE_DEBUG */ 493 } 494 495 static int _dwc2_hcd_start(struct usb_hcd *hcd); 496 497 static void dwc2_host_start(struct dwc2_hsotg *hsotg) 498 { 499 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 500 501 hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); 502 _dwc2_hcd_start(hcd); 503 } 504 505 static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) 506 { 507 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 508 509 hcd->self.is_b_host = 0; 510 } 511 512 static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, 513 int *hub_addr, int *hub_port) 514 { 515 struct urb *urb = context; 516 517 if (urb->dev->tt) 518 *hub_addr = urb->dev->tt->hub->devnum; 519 else 520 *hub_addr = 0; 521 *hub_port = urb->dev->ttport; 522 } 523 524 /* 525 * ========================================================================= 526 * Low Level Host Channel Access Functions 527 * ========================================================================= 528 */ 529 530 static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, 531 struct dwc2_host_chan *chan) 532 { 533 u32 hcintmsk = HCINTMSK_CHHLTD; 534 535 switch (chan->ep_type) { 536 case USB_ENDPOINT_XFER_CONTROL: 537 case USB_ENDPOINT_XFER_BULK: 538 dev_vdbg(hsotg->dev, "control/bulk\n"); 539 hcintmsk |= HCINTMSK_XFERCOMPL; 540 hcintmsk |= HCINTMSK_STALL; 541 hcintmsk |= HCINTMSK_XACTERR; 542 hcintmsk |= HCINTMSK_DATATGLERR; 543 if (chan->ep_is_in) { 544 hcintmsk |= HCINTMSK_BBLERR; 545 } else { 546 hcintmsk |= HCINTMSK_NAK; 547 hcintmsk |= HCINTMSK_NYET; 548 if (chan->do_ping) 549 hcintmsk |= HCINTMSK_ACK; 550 } 551 552 if (chan->do_split) { 553 hcintmsk |= HCINTMSK_NAK; 554 if (chan->complete_split) 555 hcintmsk |= HCINTMSK_NYET; 556 else 557 hcintmsk |= HCINTMSK_ACK; 558 } 559 560 if (chan->error_state) 561 hcintmsk |= HCINTMSK_ACK; 562 break; 563 564 case USB_ENDPOINT_XFER_INT: 565 if (dbg_perio()) 566 dev_vdbg(hsotg->dev, "intr\n"); 567 hcintmsk |= HCINTMSK_XFERCOMPL; 568 hcintmsk |= HCINTMSK_NAK; 569 hcintmsk |= HCINTMSK_STALL; 570 hcintmsk |= HCINTMSK_XACTERR; 571 hcintmsk |= HCINTMSK_DATATGLERR; 572 hcintmsk |= HCINTMSK_FRMOVRUN; 573 574 if (chan->ep_is_in) 575 hcintmsk |= HCINTMSK_BBLERR; 576 if (chan->error_state) 577 hcintmsk |= HCINTMSK_ACK; 578 if (chan->do_split) { 579 if (chan->complete_split) 580 hcintmsk |= HCINTMSK_NYET; 581 else 582 hcintmsk |= HCINTMSK_ACK; 583 } 584 break; 585 586 case USB_ENDPOINT_XFER_ISOC: 587 if (dbg_perio()) 588 dev_vdbg(hsotg->dev, "isoc\n"); 589 hcintmsk |= HCINTMSK_XFERCOMPL; 590 hcintmsk |= HCINTMSK_FRMOVRUN; 591 hcintmsk |= HCINTMSK_ACK; 592 593 if (chan->ep_is_in) { 594 hcintmsk |= HCINTMSK_XACTERR; 595 hcintmsk |= HCINTMSK_BBLERR; 596 } 597 break; 598 default: 599 dev_err(hsotg->dev, "## Unknown EP type ##\n"); 600 break; 601 } 602 603 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 604 if (dbg_hc(chan)) 605 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 606 } 607 608 static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, 609 struct dwc2_host_chan *chan) 610 { 611 u32 hcintmsk = HCINTMSK_CHHLTD; 612 613 /* 614 * For Descriptor DMA mode core halts the channel on AHB error. 615 * Interrupt is not required. 616 */ 617 if (!hsotg->params.dma_desc_enable) { 618 if (dbg_hc(chan)) 619 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 620 hcintmsk |= HCINTMSK_AHBERR; 621 } else { 622 if (dbg_hc(chan)) 623 dev_vdbg(hsotg->dev, "desc DMA enabled\n"); 624 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 625 hcintmsk |= HCINTMSK_XFERCOMPL; 626 } 627 628 if (chan->error_state && !chan->do_split && 629 chan->ep_type != USB_ENDPOINT_XFER_ISOC) { 630 if (dbg_hc(chan)) 631 dev_vdbg(hsotg->dev, "setting ACK\n"); 632 hcintmsk |= HCINTMSK_ACK; 633 if (chan->ep_is_in) { 634 hcintmsk |= HCINTMSK_DATATGLERR; 635 if (chan->ep_type != USB_ENDPOINT_XFER_INT) 636 hcintmsk |= HCINTMSK_NAK; 637 } 638 } 639 640 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 641 if (dbg_hc(chan)) 642 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 643 } 644 645 static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, 646 struct dwc2_host_chan *chan) 647 { 648 u32 intmsk; 649 650 if (hsotg->params.host_dma) { 651 if (dbg_hc(chan)) 652 dev_vdbg(hsotg->dev, "DMA enabled\n"); 653 dwc2_hc_enable_dma_ints(hsotg, chan); 654 } else { 655 if (dbg_hc(chan)) 656 dev_vdbg(hsotg->dev, "DMA disabled\n"); 657 dwc2_hc_enable_slave_ints(hsotg, chan); 658 } 659 660 /* Enable the top level host channel interrupt */ 661 intmsk = dwc2_readl(hsotg, HAINTMSK); 662 intmsk |= 1 << chan->hc_num; 663 dwc2_writel(hsotg, intmsk, HAINTMSK); 664 if (dbg_hc(chan)) 665 dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); 666 667 /* Make sure host channel interrupts are enabled */ 668 intmsk = dwc2_readl(hsotg, GINTMSK); 669 intmsk |= GINTSTS_HCHINT; 670 dwc2_writel(hsotg, intmsk, GINTMSK); 671 if (dbg_hc(chan)) 672 dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); 673 } 674 675 /** 676 * dwc2_hc_init() - Prepares a host channel for transferring packets to/from 677 * a specific endpoint 678 * 679 * @hsotg: Programming view of DWC_otg controller 680 * @chan: Information needed to initialize the host channel 681 * 682 * The HCCHARn register is set up with the characteristics specified in chan. 683 * Host channel interrupts that may need to be serviced while this transfer is 684 * in progress are enabled. 685 */ 686 static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 687 { 688 u8 hc_num = chan->hc_num; 689 u32 hcintmsk; 690 u32 hcchar; 691 u32 hcsplt = 0; 692 693 if (dbg_hc(chan)) 694 dev_vdbg(hsotg->dev, "%s()\n", __func__); 695 696 /* Clear old interrupt conditions for this host channel */ 697 hcintmsk = 0xffffffff; 698 hcintmsk &= ~HCINTMSK_RESERVED14_31; 699 dwc2_writel(hsotg, hcintmsk, HCINT(hc_num)); 700 701 /* Enable channel interrupts required for this transfer */ 702 dwc2_hc_enable_ints(hsotg, chan); 703 704 /* 705 * Program the HCCHARn register with the endpoint characteristics for 706 * the current transfer 707 */ 708 hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; 709 hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; 710 if (chan->ep_is_in) 711 hcchar |= HCCHAR_EPDIR; 712 if (chan->speed == USB_SPEED_LOW) 713 hcchar |= HCCHAR_LSPDDEV; 714 hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; 715 hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; 716 dwc2_writel(hsotg, hcchar, HCCHAR(hc_num)); 717 if (dbg_hc(chan)) { 718 dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", 719 hc_num, hcchar); 720 721 dev_vdbg(hsotg->dev, "%s: Channel %d\n", 722 __func__, hc_num); 723 dev_vdbg(hsotg->dev, " Dev Addr: %d\n", 724 chan->dev_addr); 725 dev_vdbg(hsotg->dev, " Ep Num: %d\n", 726 chan->ep_num); 727 dev_vdbg(hsotg->dev, " Is In: %d\n", 728 chan->ep_is_in); 729 dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", 730 chan->speed == USB_SPEED_LOW); 731 dev_vdbg(hsotg->dev, " Ep Type: %d\n", 732 chan->ep_type); 733 dev_vdbg(hsotg->dev, " Max Pkt: %d\n", 734 chan->max_packet); 735 } 736 737 /* Program the HCSPLT register for SPLITs */ 738 if (chan->do_split) { 739 if (dbg_hc(chan)) 740 dev_vdbg(hsotg->dev, 741 "Programming HC %d with split --> %s\n", 742 hc_num, 743 chan->complete_split ? "CSPLIT" : "SSPLIT"); 744 if (chan->complete_split) 745 hcsplt |= HCSPLT_COMPSPLT; 746 hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & 747 HCSPLT_XACTPOS_MASK; 748 hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & 749 HCSPLT_HUBADDR_MASK; 750 hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & 751 HCSPLT_PRTADDR_MASK; 752 if (dbg_hc(chan)) { 753 dev_vdbg(hsotg->dev, " comp split %d\n", 754 chan->complete_split); 755 dev_vdbg(hsotg->dev, " xact pos %d\n", 756 chan->xact_pos); 757 dev_vdbg(hsotg->dev, " hub addr %d\n", 758 chan->hub_addr); 759 dev_vdbg(hsotg->dev, " hub port %d\n", 760 chan->hub_port); 761 dev_vdbg(hsotg->dev, " is_in %d\n", 762 chan->ep_is_in); 763 dev_vdbg(hsotg->dev, " Max Pkt %d\n", 764 chan->max_packet); 765 dev_vdbg(hsotg->dev, " xferlen %d\n", 766 chan->xfer_len); 767 } 768 } 769 770 dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num)); 771 } 772 773 /** 774 * dwc2_hc_halt() - Attempts to halt a host channel 775 * 776 * @hsotg: Controller register interface 777 * @chan: Host channel to halt 778 * @halt_status: Reason for halting the channel 779 * 780 * This function should only be called in Slave mode or to abort a transfer in 781 * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the 782 * controller halts the channel when the transfer is complete or a condition 783 * occurs that requires application intervention. 784 * 785 * In slave mode, checks for a free request queue entry, then sets the Channel 786 * Enable and Channel Disable bits of the Host Channel Characteristics 787 * register of the specified channel to intiate the halt. If there is no free 788 * request queue entry, sets only the Channel Disable bit of the HCCHARn 789 * register to flush requests for this channel. In the latter case, sets a 790 * flag to indicate that the host channel needs to be halted when a request 791 * queue slot is open. 792 * 793 * In DMA mode, always sets the Channel Enable and Channel Disable bits of the 794 * HCCHARn register. The controller ensures there is space in the request 795 * queue before submitting the halt request. 796 * 797 * Some time may elapse before the core flushes any posted requests for this 798 * host channel and halts. The Channel Halted interrupt handler completes the 799 * deactivation of the host channel. 800 */ 801 void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, 802 enum dwc2_halt_status halt_status) 803 { 804 u32 nptxsts, hptxsts, hcchar; 805 806 if (dbg_hc(chan)) 807 dev_vdbg(hsotg->dev, "%s()\n", __func__); 808 809 /* 810 * In buffer DMA or external DMA mode channel can't be halted 811 * for non-split periodic channels. At the end of the next 812 * uframe/frame (in the worst case), the core generates a channel 813 * halted and disables the channel automatically. 814 */ 815 if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) || 816 hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) { 817 if (!chan->do_split && 818 (chan->ep_type == USB_ENDPOINT_XFER_ISOC || 819 chan->ep_type == USB_ENDPOINT_XFER_INT)) { 820 dev_err(hsotg->dev, "%s() Channel can't be halted\n", 821 __func__); 822 return; 823 } 824 } 825 826 if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) 827 dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); 828 829 if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || 830 halt_status == DWC2_HC_XFER_AHB_ERR) { 831 /* 832 * Disable all channel interrupts except Ch Halted. The QTD 833 * and QH state associated with this transfer has been cleared 834 * (in the case of URB_DEQUEUE), so the channel needs to be 835 * shut down carefully to prevent crashes. 836 */ 837 u32 hcintmsk = HCINTMSK_CHHLTD; 838 839 dev_vdbg(hsotg->dev, "dequeue/error\n"); 840 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 841 842 /* 843 * Make sure no other interrupts besides halt are currently 844 * pending. Handling another interrupt could cause a crash due 845 * to the QTD and QH state. 846 */ 847 dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num)); 848 849 /* 850 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR 851 * even if the channel was already halted for some other 852 * reason 853 */ 854 chan->halt_status = halt_status; 855 856 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 857 if (!(hcchar & HCCHAR_CHENA)) { 858 /* 859 * The channel is either already halted or it hasn't 860 * started yet. In DMA mode, the transfer may halt if 861 * it finishes normally or a condition occurs that 862 * requires driver intervention. Don't want to halt 863 * the channel again. In either Slave or DMA mode, 864 * it's possible that the transfer has been assigned 865 * to a channel, but not started yet when an URB is 866 * dequeued. Don't want to halt a channel that hasn't 867 * started yet. 868 */ 869 return; 870 } 871 } 872 if (chan->halt_pending) { 873 /* 874 * A halt has already been issued for this channel. This might 875 * happen when a transfer is aborted by a higher level in 876 * the stack. 877 */ 878 dev_vdbg(hsotg->dev, 879 "*** %s: Channel %d, chan->halt_pending already set ***\n", 880 __func__, chan->hc_num); 881 return; 882 } 883 884 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 885 886 /* No need to set the bit in DDMA for disabling the channel */ 887 /* TODO check it everywhere channel is disabled */ 888 if (!hsotg->params.dma_desc_enable) { 889 if (dbg_hc(chan)) 890 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 891 hcchar |= HCCHAR_CHENA; 892 } else { 893 if (dbg_hc(chan)) 894 dev_dbg(hsotg->dev, "desc DMA enabled\n"); 895 } 896 hcchar |= HCCHAR_CHDIS; 897 898 if (!hsotg->params.host_dma) { 899 if (dbg_hc(chan)) 900 dev_vdbg(hsotg->dev, "DMA not enabled\n"); 901 hcchar |= HCCHAR_CHENA; 902 903 /* Check for space in the request queue to issue the halt */ 904 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || 905 chan->ep_type == USB_ENDPOINT_XFER_BULK) { 906 dev_vdbg(hsotg->dev, "control/bulk\n"); 907 nptxsts = dwc2_readl(hsotg, GNPTXSTS); 908 if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { 909 dev_vdbg(hsotg->dev, "Disabling channel\n"); 910 hcchar &= ~HCCHAR_CHENA; 911 } 912 } else { 913 if (dbg_perio()) 914 dev_vdbg(hsotg->dev, "isoc/intr\n"); 915 hptxsts = dwc2_readl(hsotg, HPTXSTS); 916 if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || 917 hsotg->queuing_high_bandwidth) { 918 if (dbg_perio()) 919 dev_vdbg(hsotg->dev, "Disabling channel\n"); 920 hcchar &= ~HCCHAR_CHENA; 921 } 922 } 923 } else { 924 if (dbg_hc(chan)) 925 dev_vdbg(hsotg->dev, "DMA enabled\n"); 926 } 927 928 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 929 chan->halt_status = halt_status; 930 931 if (hcchar & HCCHAR_CHENA) { 932 if (dbg_hc(chan)) 933 dev_vdbg(hsotg->dev, "Channel enabled\n"); 934 chan->halt_pending = 1; 935 chan->halt_on_queue = 0; 936 } else { 937 if (dbg_hc(chan)) 938 dev_vdbg(hsotg->dev, "Channel disabled\n"); 939 chan->halt_on_queue = 1; 940 } 941 942 if (dbg_hc(chan)) { 943 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 944 chan->hc_num); 945 dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", 946 hcchar); 947 dev_vdbg(hsotg->dev, " halt_pending: %d\n", 948 chan->halt_pending); 949 dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", 950 chan->halt_on_queue); 951 dev_vdbg(hsotg->dev, " halt_status: %d\n", 952 chan->halt_status); 953 } 954 } 955 956 /** 957 * dwc2_hc_cleanup() - Clears the transfer state for a host channel 958 * 959 * @hsotg: Programming view of DWC_otg controller 960 * @chan: Identifies the host channel to clean up 961 * 962 * This function is normally called after a transfer is done and the host 963 * channel is being released 964 */ 965 void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 966 { 967 u32 hcintmsk; 968 969 chan->xfer_started = 0; 970 971 list_del_init(&chan->split_order_list_entry); 972 973 /* 974 * Clear channel interrupt enables and any unhandled channel interrupt 975 * conditions 976 */ 977 dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num)); 978 hcintmsk = 0xffffffff; 979 hcintmsk &= ~HCINTMSK_RESERVED14_31; 980 dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num)); 981 } 982 983 /** 984 * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in 985 * which frame a periodic transfer should occur 986 * 987 * @hsotg: Programming view of DWC_otg controller 988 * @chan: Identifies the host channel to set up and its properties 989 * @hcchar: Current value of the HCCHAR register for the specified host channel 990 * 991 * This function has no effect on non-periodic transfers 992 */ 993 static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, 994 struct dwc2_host_chan *chan, u32 *hcchar) 995 { 996 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 997 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 998 int host_speed; 999 int xfer_ns; 1000 int xfer_us; 1001 int bytes_in_fifo; 1002 u16 fifo_space; 1003 u16 frame_number; 1004 u16 wire_frame; 1005 1006 /* 1007 * Try to figure out if we're an even or odd frame. If we set 1008 * even and the current frame number is even the the transfer 1009 * will happen immediately. Similar if both are odd. If one is 1010 * even and the other is odd then the transfer will happen when 1011 * the frame number ticks. 1012 * 1013 * There's a bit of a balancing act to get this right. 1014 * Sometimes we may want to send data in the current frame (AK 1015 * right away). We might want to do this if the frame number 1016 * _just_ ticked, but we might also want to do this in order 1017 * to continue a split transaction that happened late in a 1018 * microframe (so we didn't know to queue the next transfer 1019 * until the frame number had ticked). The problem is that we 1020 * need a lot of knowledge to know if there's actually still 1021 * time to send things or if it would be better to wait until 1022 * the next frame. 1023 * 1024 * We can look at how much time is left in the current frame 1025 * and make a guess about whether we'll have time to transfer. 1026 * We'll do that. 1027 */ 1028 1029 /* Get speed host is running at */ 1030 host_speed = (chan->speed != USB_SPEED_HIGH && 1031 !chan->do_split) ? chan->speed : USB_SPEED_HIGH; 1032 1033 /* See how many bytes are in the periodic FIFO right now */ 1034 fifo_space = (dwc2_readl(hsotg, HPTXSTS) & 1035 TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT; 1036 bytes_in_fifo = sizeof(u32) * 1037 (hsotg->params.host_perio_tx_fifo_size - 1038 fifo_space); 1039 1040 /* 1041 * Roughly estimate bus time for everything in the periodic 1042 * queue + our new transfer. This is "rough" because we're 1043 * using a function that makes takes into account IN/OUT 1044 * and INT/ISO and we're just slamming in one value for all 1045 * transfers. This should be an over-estimate and that should 1046 * be OK, but we can probably tighten it. 1047 */ 1048 xfer_ns = usb_calc_bus_time(host_speed, false, false, 1049 chan->xfer_len + bytes_in_fifo); 1050 xfer_us = NS_TO_US(xfer_ns); 1051 1052 /* See what frame number we'll be at by the time we finish */ 1053 frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us); 1054 1055 /* This is when we were scheduled to be on the wire */ 1056 wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1); 1057 1058 /* 1059 * If we'd finish _after_ the frame we're scheduled in then 1060 * it's hopeless. Just schedule right away and hope for the 1061 * best. Note that it _might_ be wise to call back into the 1062 * scheduler to pick a better frame, but this is better than 1063 * nothing. 1064 */ 1065 if (dwc2_frame_num_gt(frame_number, wire_frame)) { 1066 dwc2_sch_vdbg(hsotg, 1067 "QH=%p EO MISS fr=%04x=>%04x (%+d)\n", 1068 chan->qh, wire_frame, frame_number, 1069 dwc2_frame_num_dec(frame_number, 1070 wire_frame)); 1071 wire_frame = frame_number; 1072 1073 /* 1074 * We picked a different frame number; communicate this 1075 * back to the scheduler so it doesn't try to schedule 1076 * another in the same frame. 1077 * 1078 * Remember that next_active_frame is 1 before the wire 1079 * frame. 1080 */ 1081 chan->qh->next_active_frame = 1082 dwc2_frame_num_dec(frame_number, 1); 1083 } 1084 1085 if (wire_frame & 1) 1086 *hcchar |= HCCHAR_ODDFRM; 1087 else 1088 *hcchar &= ~HCCHAR_ODDFRM; 1089 } 1090 } 1091 1092 static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) 1093 { 1094 /* Set up the initial PID for the transfer */ 1095 if (chan->speed == USB_SPEED_HIGH) { 1096 if (chan->ep_is_in) { 1097 if (chan->multi_count == 1) 1098 chan->data_pid_start = DWC2_HC_PID_DATA0; 1099 else if (chan->multi_count == 2) 1100 chan->data_pid_start = DWC2_HC_PID_DATA1; 1101 else 1102 chan->data_pid_start = DWC2_HC_PID_DATA2; 1103 } else { 1104 if (chan->multi_count == 1) 1105 chan->data_pid_start = DWC2_HC_PID_DATA0; 1106 else 1107 chan->data_pid_start = DWC2_HC_PID_MDATA; 1108 } 1109 } else { 1110 chan->data_pid_start = DWC2_HC_PID_DATA0; 1111 } 1112 } 1113 1114 /** 1115 * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with 1116 * the Host Channel 1117 * 1118 * @hsotg: Programming view of DWC_otg controller 1119 * @chan: Information needed to initialize the host channel 1120 * 1121 * This function should only be called in Slave mode. For a channel associated 1122 * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel 1123 * associated with a periodic EP, the periodic Tx FIFO is written. 1124 * 1125 * Upon return the xfer_buf and xfer_count fields in chan are incremented by 1126 * the number of bytes written to the Tx FIFO. 1127 */ 1128 static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, 1129 struct dwc2_host_chan *chan) 1130 { 1131 u32 i; 1132 u32 remaining_count; 1133 u32 byte_count; 1134 u32 dword_count; 1135 u32 *data_buf = (u32 *)chan->xfer_buf; 1136 1137 if (dbg_hc(chan)) 1138 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1139 1140 remaining_count = chan->xfer_len - chan->xfer_count; 1141 if (remaining_count > chan->max_packet) 1142 byte_count = chan->max_packet; 1143 else 1144 byte_count = remaining_count; 1145 1146 dword_count = (byte_count + 3) / 4; 1147 1148 if (((unsigned long)data_buf & 0x3) == 0) { 1149 /* xfer_buf is DWORD aligned */ 1150 for (i = 0; i < dword_count; i++, data_buf++) 1151 dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num)); 1152 } else { 1153 /* xfer_buf is not DWORD aligned */ 1154 for (i = 0; i < dword_count; i++, data_buf++) { 1155 u32 data = data_buf[0] | data_buf[1] << 8 | 1156 data_buf[2] << 16 | data_buf[3] << 24; 1157 dwc2_writel(hsotg, data, HCFIFO(chan->hc_num)); 1158 } 1159 } 1160 1161 chan->xfer_count += byte_count; 1162 chan->xfer_buf += byte_count; 1163 } 1164 1165 /** 1166 * dwc2_hc_do_ping() - Starts a PING transfer 1167 * 1168 * @hsotg: Programming view of DWC_otg controller 1169 * @chan: Information needed to initialize the host channel 1170 * 1171 * This function should only be called in Slave mode. The Do Ping bit is set in 1172 * the HCTSIZ register, then the channel is enabled. 1173 */ 1174 static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, 1175 struct dwc2_host_chan *chan) 1176 { 1177 u32 hcchar; 1178 u32 hctsiz; 1179 1180 if (dbg_hc(chan)) 1181 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1182 chan->hc_num); 1183 1184 hctsiz = TSIZ_DOPNG; 1185 hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; 1186 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1187 1188 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1189 hcchar |= HCCHAR_CHENA; 1190 hcchar &= ~HCCHAR_CHDIS; 1191 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1192 } 1193 1194 /** 1195 * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host 1196 * channel and starts the transfer 1197 * 1198 * @hsotg: Programming view of DWC_otg controller 1199 * @chan: Information needed to initialize the host channel. The xfer_len value 1200 * may be reduced to accommodate the max widths of the XferSize and 1201 * PktCnt fields in the HCTSIZn register. The multi_count value may be 1202 * changed to reflect the final xfer_len value. 1203 * 1204 * This function may be called in either Slave mode or DMA mode. In Slave mode, 1205 * the caller must ensure that there is sufficient space in the request queue 1206 * and Tx Data FIFO. 1207 * 1208 * For an OUT transfer in Slave mode, it loads a data packet into the 1209 * appropriate FIFO. If necessary, additional data packets are loaded in the 1210 * Host ISR. 1211 * 1212 * For an IN transfer in Slave mode, a data packet is requested. The data 1213 * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, 1214 * additional data packets are requested in the Host ISR. 1215 * 1216 * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ 1217 * register along with a packet count of 1 and the channel is enabled. This 1218 * causes a single PING transaction to occur. Other fields in HCTSIZ are 1219 * simply set to 0 since no data transfer occurs in this case. 1220 * 1221 * For a PING transfer in DMA mode, the HCTSIZ register is initialized with 1222 * all the information required to perform the subsequent data transfer. In 1223 * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the 1224 * controller performs the entire PING protocol, then starts the data 1225 * transfer. 1226 */ 1227 static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, 1228 struct dwc2_host_chan *chan) 1229 { 1230 u32 max_hc_xfer_size = hsotg->params.max_transfer_size; 1231 u16 max_hc_pkt_count = hsotg->params.max_packet_count; 1232 u32 hcchar; 1233 u32 hctsiz = 0; 1234 u16 num_packets; 1235 u32 ec_mc; 1236 1237 if (dbg_hc(chan)) 1238 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1239 1240 if (chan->do_ping) { 1241 if (!hsotg->params.host_dma) { 1242 if (dbg_hc(chan)) 1243 dev_vdbg(hsotg->dev, "ping, no DMA\n"); 1244 dwc2_hc_do_ping(hsotg, chan); 1245 chan->xfer_started = 1; 1246 return; 1247 } 1248 1249 if (dbg_hc(chan)) 1250 dev_vdbg(hsotg->dev, "ping, DMA\n"); 1251 1252 hctsiz |= TSIZ_DOPNG; 1253 } 1254 1255 if (chan->do_split) { 1256 if (dbg_hc(chan)) 1257 dev_vdbg(hsotg->dev, "split\n"); 1258 num_packets = 1; 1259 1260 if (chan->complete_split && !chan->ep_is_in) 1261 /* 1262 * For CSPLIT OUT Transfer, set the size to 0 so the 1263 * core doesn't expect any data written to the FIFO 1264 */ 1265 chan->xfer_len = 0; 1266 else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) 1267 chan->xfer_len = chan->max_packet; 1268 else if (!chan->ep_is_in && chan->xfer_len > 188) 1269 chan->xfer_len = 188; 1270 1271 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1272 TSIZ_XFERSIZE_MASK; 1273 1274 /* For split set ec_mc for immediate retries */ 1275 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1276 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1277 ec_mc = 3; 1278 else 1279 ec_mc = 1; 1280 } else { 1281 if (dbg_hc(chan)) 1282 dev_vdbg(hsotg->dev, "no split\n"); 1283 /* 1284 * Ensure that the transfer length and packet count will fit 1285 * in the widths allocated for them in the HCTSIZn register 1286 */ 1287 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1288 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1289 /* 1290 * Make sure the transfer size is no larger than one 1291 * (micro)frame's worth of data. (A check was done 1292 * when the periodic transfer was accepted to ensure 1293 * that a (micro)frame's worth of data can be 1294 * programmed into a channel.) 1295 */ 1296 u32 max_periodic_len = 1297 chan->multi_count * chan->max_packet; 1298 1299 if (chan->xfer_len > max_periodic_len) 1300 chan->xfer_len = max_periodic_len; 1301 } else if (chan->xfer_len > max_hc_xfer_size) { 1302 /* 1303 * Make sure that xfer_len is a multiple of max packet 1304 * size 1305 */ 1306 chan->xfer_len = 1307 max_hc_xfer_size - chan->max_packet + 1; 1308 } 1309 1310 if (chan->xfer_len > 0) { 1311 num_packets = (chan->xfer_len + chan->max_packet - 1) / 1312 chan->max_packet; 1313 if (num_packets > max_hc_pkt_count) { 1314 num_packets = max_hc_pkt_count; 1315 chan->xfer_len = num_packets * chan->max_packet; 1316 } 1317 } else { 1318 /* Need 1 packet for transfer length of 0 */ 1319 num_packets = 1; 1320 } 1321 1322 if (chan->ep_is_in) 1323 /* 1324 * Always program an integral # of max packets for IN 1325 * transfers 1326 */ 1327 chan->xfer_len = num_packets * chan->max_packet; 1328 1329 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1330 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1331 /* 1332 * Make sure that the multi_count field matches the 1333 * actual transfer length 1334 */ 1335 chan->multi_count = num_packets; 1336 1337 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1338 dwc2_set_pid_isoc(chan); 1339 1340 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1341 TSIZ_XFERSIZE_MASK; 1342 1343 /* The ec_mc gets the multi_count for non-split */ 1344 ec_mc = chan->multi_count; 1345 } 1346 1347 chan->start_pkt_count = num_packets; 1348 hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; 1349 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1350 TSIZ_SC_MC_PID_MASK; 1351 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1352 if (dbg_hc(chan)) { 1353 dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", 1354 hctsiz, chan->hc_num); 1355 1356 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1357 chan->hc_num); 1358 dev_vdbg(hsotg->dev, " Xfer Size: %d\n", 1359 (hctsiz & TSIZ_XFERSIZE_MASK) >> 1360 TSIZ_XFERSIZE_SHIFT); 1361 dev_vdbg(hsotg->dev, " Num Pkts: %d\n", 1362 (hctsiz & TSIZ_PKTCNT_MASK) >> 1363 TSIZ_PKTCNT_SHIFT); 1364 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1365 (hctsiz & TSIZ_SC_MC_PID_MASK) >> 1366 TSIZ_SC_MC_PID_SHIFT); 1367 } 1368 1369 if (hsotg->params.host_dma) { 1370 dma_addr_t dma_addr; 1371 1372 if (chan->align_buf) { 1373 if (dbg_hc(chan)) 1374 dev_vdbg(hsotg->dev, "align_buf\n"); 1375 dma_addr = chan->align_buf; 1376 } else { 1377 dma_addr = chan->xfer_dma; 1378 } 1379 dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num)); 1380 1381 if (dbg_hc(chan)) 1382 dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", 1383 (unsigned long)dma_addr, chan->hc_num); 1384 } 1385 1386 /* Start the split */ 1387 if (chan->do_split) { 1388 u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 1389 1390 hcsplt |= HCSPLT_SPLTENA; 1391 dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num)); 1392 } 1393 1394 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1395 hcchar &= ~HCCHAR_MULTICNT_MASK; 1396 hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK; 1397 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1398 1399 if (hcchar & HCCHAR_CHDIS) 1400 dev_warn(hsotg->dev, 1401 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1402 __func__, chan->hc_num, hcchar); 1403 1404 /* Set host channel enable after all other setup is complete */ 1405 hcchar |= HCCHAR_CHENA; 1406 hcchar &= ~HCCHAR_CHDIS; 1407 1408 if (dbg_hc(chan)) 1409 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1410 (hcchar & HCCHAR_MULTICNT_MASK) >> 1411 HCCHAR_MULTICNT_SHIFT); 1412 1413 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1414 if (dbg_hc(chan)) 1415 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1416 chan->hc_num); 1417 1418 chan->xfer_started = 1; 1419 chan->requests++; 1420 1421 if (!hsotg->params.host_dma && 1422 !chan->ep_is_in && chan->xfer_len > 0) 1423 /* Load OUT packet into the appropriate Tx FIFO */ 1424 dwc2_hc_write_packet(hsotg, chan); 1425 } 1426 1427 /** 1428 * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a 1429 * host channel and starts the transfer in Descriptor DMA mode 1430 * 1431 * @hsotg: Programming view of DWC_otg controller 1432 * @chan: Information needed to initialize the host channel 1433 * 1434 * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. 1435 * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field 1436 * with micro-frame bitmap. 1437 * 1438 * Initializes HCDMA register with descriptor list address and CTD value then 1439 * starts the transfer via enabling the channel. 1440 */ 1441 void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, 1442 struct dwc2_host_chan *chan) 1443 { 1444 u32 hcchar; 1445 u32 hctsiz = 0; 1446 1447 if (chan->do_ping) 1448 hctsiz |= TSIZ_DOPNG; 1449 1450 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1451 dwc2_set_pid_isoc(chan); 1452 1453 /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ 1454 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1455 TSIZ_SC_MC_PID_MASK; 1456 1457 /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ 1458 hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; 1459 1460 /* Non-zero only for high-speed interrupt endpoints */ 1461 hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; 1462 1463 if (dbg_hc(chan)) { 1464 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1465 chan->hc_num); 1466 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1467 chan->data_pid_start); 1468 dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); 1469 } 1470 1471 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1472 1473 dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr, 1474 chan->desc_list_sz, DMA_TO_DEVICE); 1475 1476 dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num)); 1477 1478 if (dbg_hc(chan)) 1479 dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n", 1480 &chan->desc_list_addr, chan->hc_num); 1481 1482 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1483 hcchar &= ~HCCHAR_MULTICNT_MASK; 1484 hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & 1485 HCCHAR_MULTICNT_MASK; 1486 1487 if (hcchar & HCCHAR_CHDIS) 1488 dev_warn(hsotg->dev, 1489 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1490 __func__, chan->hc_num, hcchar); 1491 1492 /* Set host channel enable after all other setup is complete */ 1493 hcchar |= HCCHAR_CHENA; 1494 hcchar &= ~HCCHAR_CHDIS; 1495 1496 if (dbg_hc(chan)) 1497 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1498 (hcchar & HCCHAR_MULTICNT_MASK) >> 1499 HCCHAR_MULTICNT_SHIFT); 1500 1501 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1502 if (dbg_hc(chan)) 1503 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1504 chan->hc_num); 1505 1506 chan->xfer_started = 1; 1507 chan->requests++; 1508 } 1509 1510 /** 1511 * dwc2_hc_continue_transfer() - Continues a data transfer that was started by 1512 * a previous call to dwc2_hc_start_transfer() 1513 * 1514 * @hsotg: Programming view of DWC_otg controller 1515 * @chan: Information needed to initialize the host channel 1516 * 1517 * The caller must ensure there is sufficient space in the request queue and Tx 1518 * Data FIFO. This function should only be called in Slave mode. In DMA mode, 1519 * the controller acts autonomously to complete transfers programmed to a host 1520 * channel. 1521 * 1522 * For an OUT transfer, a new data packet is loaded into the appropriate FIFO 1523 * if there is any data remaining to be queued. For an IN transfer, another 1524 * data packet is always requested. For the SETUP phase of a control transfer, 1525 * this function does nothing. 1526 * 1527 * Return: 1 if a new request is queued, 0 if no more requests are required 1528 * for this transfer 1529 */ 1530 static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, 1531 struct dwc2_host_chan *chan) 1532 { 1533 if (dbg_hc(chan)) 1534 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1535 chan->hc_num); 1536 1537 if (chan->do_split) 1538 /* SPLITs always queue just once per channel */ 1539 return 0; 1540 1541 if (chan->data_pid_start == DWC2_HC_PID_SETUP) 1542 /* SETUPs are queued only once since they can't be NAK'd */ 1543 return 0; 1544 1545 if (chan->ep_is_in) { 1546 /* 1547 * Always queue another request for other IN transfers. If 1548 * back-to-back INs are issued and NAKs are received for both, 1549 * the driver may still be processing the first NAK when the 1550 * second NAK is received. When the interrupt handler clears 1551 * the NAK interrupt for the first NAK, the second NAK will 1552 * not be seen. So we can't depend on the NAK interrupt 1553 * handler to requeue a NAK'd request. Instead, IN requests 1554 * are issued each time this function is called. When the 1555 * transfer completes, the extra requests for the channel will 1556 * be flushed. 1557 */ 1558 u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1559 1560 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1561 hcchar |= HCCHAR_CHENA; 1562 hcchar &= ~HCCHAR_CHDIS; 1563 if (dbg_hc(chan)) 1564 dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", 1565 hcchar); 1566 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1567 chan->requests++; 1568 return 1; 1569 } 1570 1571 /* OUT transfers */ 1572 1573 if (chan->xfer_count < chan->xfer_len) { 1574 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1575 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1576 u32 hcchar = dwc2_readl(hsotg, 1577 HCCHAR(chan->hc_num)); 1578 1579 dwc2_hc_set_even_odd_frame(hsotg, chan, 1580 &hcchar); 1581 } 1582 1583 /* Load OUT packet into the appropriate Tx FIFO */ 1584 dwc2_hc_write_packet(hsotg, chan); 1585 chan->requests++; 1586 return 1; 1587 } 1588 1589 return 0; 1590 } 1591 1592 /* 1593 * ========================================================================= 1594 * HCD 1595 * ========================================================================= 1596 */ 1597 1598 /* 1599 * Processes all the URBs in a single list of QHs. Completes them with 1600 * -ETIMEDOUT and frees the QTD. 1601 * 1602 * Must be called with interrupt disabled and spinlock held 1603 */ 1604 static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, 1605 struct list_head *qh_list) 1606 { 1607 struct dwc2_qh *qh, *qh_tmp; 1608 struct dwc2_qtd *qtd, *qtd_tmp; 1609 1610 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1611 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1612 qtd_list_entry) { 1613 dwc2_host_complete(hsotg, qtd, -ECONNRESET); 1614 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1615 } 1616 } 1617 } 1618 1619 static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, 1620 struct list_head *qh_list) 1621 { 1622 struct dwc2_qtd *qtd, *qtd_tmp; 1623 struct dwc2_qh *qh, *qh_tmp; 1624 unsigned long flags; 1625 1626 if (!qh_list->next) 1627 /* The list hasn't been initialized yet */ 1628 return; 1629 1630 spin_lock_irqsave(&hsotg->lock, flags); 1631 1632 /* Ensure there are no QTDs or URBs left */ 1633 dwc2_kill_urbs_in_qh_list(hsotg, qh_list); 1634 1635 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1636 dwc2_hcd_qh_unlink(hsotg, qh); 1637 1638 /* Free each QTD in the QH's QTD list */ 1639 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1640 qtd_list_entry) 1641 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1642 1643 if (qh->channel && qh->channel->qh == qh) 1644 qh->channel->qh = NULL; 1645 1646 spin_unlock_irqrestore(&hsotg->lock, flags); 1647 dwc2_hcd_qh_free(hsotg, qh); 1648 spin_lock_irqsave(&hsotg->lock, flags); 1649 } 1650 1651 spin_unlock_irqrestore(&hsotg->lock, flags); 1652 } 1653 1654 /* 1655 * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic 1656 * and periodic schedules. The QTD associated with each URB is removed from 1657 * the schedule and freed. This function may be called when a disconnect is 1658 * detected or when the HCD is being stopped. 1659 * 1660 * Must be called with interrupt disabled and spinlock held 1661 */ 1662 static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) 1663 { 1664 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); 1665 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting); 1666 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); 1667 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); 1668 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); 1669 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); 1670 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); 1671 } 1672 1673 /** 1674 * dwc2_hcd_start() - Starts the HCD when switching to Host mode 1675 * 1676 * @hsotg: Pointer to struct dwc2_hsotg 1677 */ 1678 void dwc2_hcd_start(struct dwc2_hsotg *hsotg) 1679 { 1680 u32 hprt0; 1681 1682 if (hsotg->op_state == OTG_STATE_B_HOST) { 1683 /* 1684 * Reset the port. During a HNP mode switch the reset 1685 * needs to occur within 1ms and have a duration of at 1686 * least 50ms. 1687 */ 1688 hprt0 = dwc2_read_hprt0(hsotg); 1689 hprt0 |= HPRT0_RST; 1690 dwc2_writel(hsotg, hprt0, HPRT0); 1691 } 1692 1693 queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, 1694 msecs_to_jiffies(50)); 1695 } 1696 1697 /* Must be called with interrupt disabled and spinlock held */ 1698 static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) 1699 { 1700 int num_channels = hsotg->params.host_channels; 1701 struct dwc2_host_chan *channel; 1702 u32 hcchar; 1703 int i; 1704 1705 if (!hsotg->params.host_dma) { 1706 /* Flush out any channel requests in slave mode */ 1707 for (i = 0; i < num_channels; i++) { 1708 channel = hsotg->hc_ptr_array[i]; 1709 if (!list_empty(&channel->hc_list_entry)) 1710 continue; 1711 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1712 if (hcchar & HCCHAR_CHENA) { 1713 hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); 1714 hcchar |= HCCHAR_CHDIS; 1715 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1716 } 1717 } 1718 } 1719 1720 for (i = 0; i < num_channels; i++) { 1721 channel = hsotg->hc_ptr_array[i]; 1722 if (!list_empty(&channel->hc_list_entry)) 1723 continue; 1724 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1725 if (hcchar & HCCHAR_CHENA) { 1726 /* Halt the channel */ 1727 hcchar |= HCCHAR_CHDIS; 1728 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1729 } 1730 1731 dwc2_hc_cleanup(hsotg, channel); 1732 list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); 1733 /* 1734 * Added for Descriptor DMA to prevent channel double cleanup in 1735 * release_channel_ddma(), which is called from ep_disable when 1736 * device disconnects 1737 */ 1738 channel->qh = NULL; 1739 } 1740 /* All channels have been freed, mark them available */ 1741 if (hsotg->params.uframe_sched) { 1742 hsotg->available_host_channels = 1743 hsotg->params.host_channels; 1744 } else { 1745 hsotg->non_periodic_channels = 0; 1746 hsotg->periodic_channels = 0; 1747 } 1748 } 1749 1750 /** 1751 * dwc2_hcd_connect() - Handles connect of the HCD 1752 * 1753 * @hsotg: Pointer to struct dwc2_hsotg 1754 * 1755 * Must be called with interrupt disabled and spinlock held 1756 */ 1757 void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) 1758 { 1759 if (hsotg->lx_state != DWC2_L0) 1760 usb_hcd_resume_root_hub(hsotg->priv); 1761 1762 hsotg->flags.b.port_connect_status_change = 1; 1763 hsotg->flags.b.port_connect_status = 1; 1764 } 1765 1766 /** 1767 * dwc2_hcd_disconnect() - Handles disconnect of the HCD 1768 * 1769 * @hsotg: Pointer to struct dwc2_hsotg 1770 * @force: If true, we won't try to reconnect even if we see device connected. 1771 * 1772 * Must be called with interrupt disabled and spinlock held 1773 */ 1774 void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) 1775 { 1776 u32 intr; 1777 u32 hprt0; 1778 1779 /* Set status flags for the hub driver */ 1780 hsotg->flags.b.port_connect_status_change = 1; 1781 hsotg->flags.b.port_connect_status = 0; 1782 1783 /* 1784 * Shutdown any transfers in process by clearing the Tx FIFO Empty 1785 * interrupt mask and status bits and disabling subsequent host 1786 * channel interrupts. 1787 */ 1788 intr = dwc2_readl(hsotg, GINTMSK); 1789 intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); 1790 dwc2_writel(hsotg, intr, GINTMSK); 1791 intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; 1792 dwc2_writel(hsotg, intr, GINTSTS); 1793 1794 /* 1795 * Turn off the vbus power only if the core has transitioned to device 1796 * mode. If still in host mode, need to keep power on to detect a 1797 * reconnection. 1798 */ 1799 if (dwc2_is_device_mode(hsotg)) { 1800 if (hsotg->op_state != OTG_STATE_A_SUSPEND) { 1801 dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); 1802 dwc2_writel(hsotg, 0, HPRT0); 1803 } 1804 1805 dwc2_disable_host_interrupts(hsotg); 1806 } 1807 1808 /* Respond with an error status to all URBs in the schedule */ 1809 dwc2_kill_all_urbs(hsotg); 1810 1811 if (dwc2_is_host_mode(hsotg)) 1812 /* Clean up any host channels that were in use */ 1813 dwc2_hcd_cleanup_channels(hsotg); 1814 1815 dwc2_host_disconnect(hsotg); 1816 1817 /* 1818 * Add an extra check here to see if we're actually connected but 1819 * we don't have a detection interrupt pending. This can happen if: 1820 * 1. hardware sees connect 1821 * 2. hardware sees disconnect 1822 * 3. hardware sees connect 1823 * 4. dwc2_port_intr() - clears connect interrupt 1824 * 5. dwc2_handle_common_intr() - calls here 1825 * 1826 * Without the extra check here we will end calling disconnect 1827 * and won't get any future interrupts to handle the connect. 1828 */ 1829 if (!force) { 1830 hprt0 = dwc2_readl(hsotg, HPRT0); 1831 if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS)) 1832 dwc2_hcd_connect(hsotg); 1833 } 1834 } 1835 1836 /** 1837 * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup 1838 * 1839 * @hsotg: Pointer to struct dwc2_hsotg 1840 */ 1841 static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) 1842 { 1843 if (hsotg->bus_suspended) { 1844 hsotg->flags.b.port_suspend_change = 1; 1845 usb_hcd_resume_root_hub(hsotg->priv); 1846 } 1847 1848 if (hsotg->lx_state == DWC2_L1) 1849 hsotg->flags.b.port_l1_change = 1; 1850 } 1851 1852 /** 1853 * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner 1854 * 1855 * @hsotg: Pointer to struct dwc2_hsotg 1856 * 1857 * Must be called with interrupt disabled and spinlock held 1858 */ 1859 void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) 1860 { 1861 dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); 1862 1863 /* 1864 * The root hub should be disconnected before this function is called. 1865 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) 1866 * and the QH lists (via ..._hcd_endpoint_disable). 1867 */ 1868 1869 /* Turn off all host-specific interrupts */ 1870 dwc2_disable_host_interrupts(hsotg); 1871 1872 /* Turn off the vbus power */ 1873 dev_dbg(hsotg->dev, "PortPower off\n"); 1874 dwc2_writel(hsotg, 0, HPRT0); 1875 } 1876 1877 /* Caller must hold driver lock */ 1878 static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, 1879 struct dwc2_hcd_urb *urb, struct dwc2_qh *qh, 1880 struct dwc2_qtd *qtd) 1881 { 1882 u32 intr_mask; 1883 int retval; 1884 int dev_speed; 1885 1886 if (!hsotg->flags.b.port_connect_status) { 1887 /* No longer connected */ 1888 dev_err(hsotg->dev, "Not connected\n"); 1889 return -ENODEV; 1890 } 1891 1892 dev_speed = dwc2_host_get_speed(hsotg, urb->priv); 1893 1894 /* Some configurations cannot support LS traffic on a FS root port */ 1895 if ((dev_speed == USB_SPEED_LOW) && 1896 (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && 1897 (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { 1898 u32 hprt0 = dwc2_readl(hsotg, HPRT0); 1899 u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 1900 1901 if (prtspd == HPRT0_SPD_FULL_SPEED) 1902 return -ENODEV; 1903 } 1904 1905 if (!qtd) 1906 return -EINVAL; 1907 1908 dwc2_hcd_qtd_init(qtd, urb); 1909 retval = dwc2_hcd_qtd_add(hsotg, qtd, qh); 1910 if (retval) { 1911 dev_err(hsotg->dev, 1912 "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", 1913 retval); 1914 return retval; 1915 } 1916 1917 intr_mask = dwc2_readl(hsotg, GINTMSK); 1918 if (!(intr_mask & GINTSTS_SOF)) { 1919 enum dwc2_transaction_type tr_type; 1920 1921 if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && 1922 !(qtd->urb->flags & URB_GIVEBACK_ASAP)) 1923 /* 1924 * Do not schedule SG transactions until qtd has 1925 * URB_GIVEBACK_ASAP set 1926 */ 1927 return 0; 1928 1929 tr_type = dwc2_hcd_select_transactions(hsotg); 1930 if (tr_type != DWC2_TRANSACTION_NONE) 1931 dwc2_hcd_queue_transactions(hsotg, tr_type); 1932 } 1933 1934 return 0; 1935 } 1936 1937 /* Must be called with interrupt disabled and spinlock held */ 1938 static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, 1939 struct dwc2_hcd_urb *urb) 1940 { 1941 struct dwc2_qh *qh; 1942 struct dwc2_qtd *urb_qtd; 1943 1944 urb_qtd = urb->qtd; 1945 if (!urb_qtd) { 1946 dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); 1947 return -EINVAL; 1948 } 1949 1950 qh = urb_qtd->qh; 1951 if (!qh) { 1952 dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); 1953 return -EINVAL; 1954 } 1955 1956 urb->priv = NULL; 1957 1958 if (urb_qtd->in_process && qh->channel) { 1959 dwc2_dump_channel_info(hsotg, qh->channel); 1960 1961 /* The QTD is in process (it has been assigned to a channel) */ 1962 if (hsotg->flags.b.port_connect_status) 1963 /* 1964 * If still connected (i.e. in host mode), halt the 1965 * channel so it can be used for other transfers. If 1966 * no longer connected, the host registers can't be 1967 * written to halt the channel since the core is in 1968 * device mode. 1969 */ 1970 dwc2_hc_halt(hsotg, qh->channel, 1971 DWC2_HC_XFER_URB_DEQUEUE); 1972 } 1973 1974 /* 1975 * Free the QTD and clean up the associated QH. Leave the QH in the 1976 * schedule if it has any remaining QTDs. 1977 */ 1978 if (!hsotg->params.dma_desc_enable) { 1979 u8 in_process = urb_qtd->in_process; 1980 1981 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1982 if (in_process) { 1983 dwc2_hcd_qh_deactivate(hsotg, qh, 0); 1984 qh->channel = NULL; 1985 } else if (list_empty(&qh->qtd_list)) { 1986 dwc2_hcd_qh_unlink(hsotg, qh); 1987 } 1988 } else { 1989 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1990 } 1991 1992 return 0; 1993 } 1994 1995 /* Must NOT be called with interrupt disabled or spinlock held */ 1996 static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, 1997 struct usb_host_endpoint *ep, int retry) 1998 { 1999 struct dwc2_qtd *qtd, *qtd_tmp; 2000 struct dwc2_qh *qh; 2001 unsigned long flags; 2002 int rc; 2003 2004 spin_lock_irqsave(&hsotg->lock, flags); 2005 2006 qh = ep->hcpriv; 2007 if (!qh) { 2008 rc = -EINVAL; 2009 goto err; 2010 } 2011 2012 while (!list_empty(&qh->qtd_list) && retry--) { 2013 if (retry == 0) { 2014 dev_err(hsotg->dev, 2015 "## timeout in dwc2_hcd_endpoint_disable() ##\n"); 2016 rc = -EBUSY; 2017 goto err; 2018 } 2019 2020 spin_unlock_irqrestore(&hsotg->lock, flags); 2021 msleep(20); 2022 spin_lock_irqsave(&hsotg->lock, flags); 2023 qh = ep->hcpriv; 2024 if (!qh) { 2025 rc = -EINVAL; 2026 goto err; 2027 } 2028 } 2029 2030 dwc2_hcd_qh_unlink(hsotg, qh); 2031 2032 /* Free each QTD in the QH's QTD list */ 2033 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) 2034 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 2035 2036 ep->hcpriv = NULL; 2037 2038 if (qh->channel && qh->channel->qh == qh) 2039 qh->channel->qh = NULL; 2040 2041 spin_unlock_irqrestore(&hsotg->lock, flags); 2042 2043 dwc2_hcd_qh_free(hsotg, qh); 2044 2045 return 0; 2046 2047 err: 2048 ep->hcpriv = NULL; 2049 spin_unlock_irqrestore(&hsotg->lock, flags); 2050 2051 return rc; 2052 } 2053 2054 /* Must be called with interrupt disabled and spinlock held */ 2055 static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, 2056 struct usb_host_endpoint *ep) 2057 { 2058 struct dwc2_qh *qh = ep->hcpriv; 2059 2060 if (!qh) 2061 return -EINVAL; 2062 2063 qh->data_toggle = DWC2_HC_PID_DATA0; 2064 2065 return 0; 2066 } 2067 2068 /** 2069 * dwc2_core_init() - Initializes the DWC_otg controller registers and 2070 * prepares the core for device mode or host mode operation 2071 * 2072 * @hsotg: Programming view of the DWC_otg controller 2073 * @initial_setup: If true then this is the first init for this instance. 2074 */ 2075 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) 2076 { 2077 u32 usbcfg, otgctl; 2078 int retval; 2079 2080 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2081 2082 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2083 2084 /* Set ULPI External VBUS bit if needed */ 2085 usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; 2086 if (hsotg->params.phy_ulpi_ext_vbus) 2087 usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; 2088 2089 /* Set external TS Dline pulsing bit if needed */ 2090 usbcfg &= ~GUSBCFG_TERMSELDLPULSE; 2091 if (hsotg->params.ts_dline) 2092 usbcfg |= GUSBCFG_TERMSELDLPULSE; 2093 2094 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2095 2096 /* 2097 * Reset the Controller 2098 * 2099 * We only need to reset the controller if this is a re-init. 2100 * For the first init we know for sure that earlier code reset us (it 2101 * needed to in order to properly detect various parameters). 2102 */ 2103 if (!initial_setup) { 2104 retval = dwc2_core_reset(hsotg, false); 2105 if (retval) { 2106 dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", 2107 __func__); 2108 return retval; 2109 } 2110 } 2111 2112 /* 2113 * This needs to happen in FS mode before any other programming occurs 2114 */ 2115 retval = dwc2_phy_init(hsotg, initial_setup); 2116 if (retval) 2117 return retval; 2118 2119 /* Program the GAHBCFG Register */ 2120 retval = dwc2_gahbcfg_init(hsotg); 2121 if (retval) 2122 return retval; 2123 2124 /* Program the GUSBCFG register */ 2125 dwc2_gusbcfg_init(hsotg); 2126 2127 /* Program the GOTGCTL register */ 2128 otgctl = dwc2_readl(hsotg, GOTGCTL); 2129 otgctl &= ~GOTGCTL_OTGVER; 2130 dwc2_writel(hsotg, otgctl, GOTGCTL); 2131 2132 /* Clear the SRP success bit for FS-I2c */ 2133 hsotg->srp_success = 0; 2134 2135 /* Enable common interrupts */ 2136 dwc2_enable_common_interrupts(hsotg); 2137 2138 /* 2139 * Do device or host initialization based on mode during PCD and 2140 * HCD initialization 2141 */ 2142 if (dwc2_is_host_mode(hsotg)) { 2143 dev_dbg(hsotg->dev, "Host Mode\n"); 2144 hsotg->op_state = OTG_STATE_A_HOST; 2145 } else { 2146 dev_dbg(hsotg->dev, "Device Mode\n"); 2147 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 2148 } 2149 2150 return 0; 2151 } 2152 2153 /** 2154 * dwc2_core_host_init() - Initializes the DWC_otg controller registers for 2155 * Host mode 2156 * 2157 * @hsotg: Programming view of DWC_otg controller 2158 * 2159 * This function flushes the Tx and Rx FIFOs and flushes any entries in the 2160 * request queues. Host channels are reset to ensure that they are ready for 2161 * performing transfers. 2162 */ 2163 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg) 2164 { 2165 u32 hcfg, hfir, otgctl, usbcfg; 2166 2167 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2168 2169 /* Set HS/FS Timeout Calibration to 7 (max available value). 2170 * The number of PHY clocks that the application programs in 2171 * this field is added to the high/full speed interpacket timeout 2172 * duration in the core to account for any additional delays 2173 * introduced by the PHY. This can be required, because the delay 2174 * introduced by the PHY in generating the linestate condition 2175 * can vary from one PHY to another. 2176 */ 2177 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2178 usbcfg |= GUSBCFG_TOUTCAL(7); 2179 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2180 2181 /* Restart the Phy Clock */ 2182 dwc2_writel(hsotg, 0, PCGCTL); 2183 2184 /* Initialize Host Configuration Register */ 2185 dwc2_init_fs_ls_pclk_sel(hsotg); 2186 if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || 2187 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) { 2188 hcfg = dwc2_readl(hsotg, HCFG); 2189 hcfg |= HCFG_FSLSSUPP; 2190 dwc2_writel(hsotg, hcfg, HCFG); 2191 } 2192 2193 /* 2194 * This bit allows dynamic reloading of the HFIR register during 2195 * runtime. This bit needs to be programmed during initial configuration 2196 * and its value must not be changed during runtime. 2197 */ 2198 if (hsotg->params.reload_ctl) { 2199 hfir = dwc2_readl(hsotg, HFIR); 2200 hfir |= HFIR_RLDCTRL; 2201 dwc2_writel(hsotg, hfir, HFIR); 2202 } 2203 2204 if (hsotg->params.dma_desc_enable) { 2205 u32 op_mode = hsotg->hw_params.op_mode; 2206 2207 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || 2208 !hsotg->hw_params.dma_desc_enable || 2209 op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || 2210 op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || 2211 op_mode == GHWCFG2_OP_MODE_UNDEFINED) { 2212 dev_err(hsotg->dev, 2213 "Hardware does not support descriptor DMA mode -\n"); 2214 dev_err(hsotg->dev, 2215 "falling back to buffer DMA mode.\n"); 2216 hsotg->params.dma_desc_enable = false; 2217 } else { 2218 hcfg = dwc2_readl(hsotg, HCFG); 2219 hcfg |= HCFG_DESCDMA; 2220 dwc2_writel(hsotg, hcfg, HCFG); 2221 } 2222 } 2223 2224 /* Configure data FIFO sizes */ 2225 dwc2_config_fifos(hsotg); 2226 2227 /* TODO - check this */ 2228 /* Clear Host Set HNP Enable in the OTG Control Register */ 2229 otgctl = dwc2_readl(hsotg, GOTGCTL); 2230 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2231 dwc2_writel(hsotg, otgctl, GOTGCTL); 2232 2233 /* Make sure the FIFOs are flushed */ 2234 dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); 2235 dwc2_flush_rx_fifo(hsotg); 2236 2237 /* Clear Host Set HNP Enable in the OTG Control Register */ 2238 otgctl = dwc2_readl(hsotg, GOTGCTL); 2239 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2240 dwc2_writel(hsotg, otgctl, GOTGCTL); 2241 2242 if (!hsotg->params.dma_desc_enable) { 2243 int num_channels, i; 2244 u32 hcchar; 2245 2246 /* Flush out any leftover queued requests */ 2247 num_channels = hsotg->params.host_channels; 2248 for (i = 0; i < num_channels; i++) { 2249 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2250 if (hcchar & HCCHAR_CHENA) { 2251 hcchar &= ~HCCHAR_CHENA; 2252 hcchar |= HCCHAR_CHDIS; 2253 hcchar &= ~HCCHAR_EPDIR; 2254 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2255 } 2256 } 2257 2258 /* Halt all channels to put them into a known state */ 2259 for (i = 0; i < num_channels; i++) { 2260 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2261 if (hcchar & HCCHAR_CHENA) { 2262 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; 2263 hcchar &= ~HCCHAR_EPDIR; 2264 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2265 dev_dbg(hsotg->dev, "%s: Halt channel %d\n", 2266 __func__, i); 2267 2268 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i), 2269 HCCHAR_CHENA, 2270 1000)) { 2271 dev_warn(hsotg->dev, 2272 "Unable to clear enable on channel %d\n", 2273 i); 2274 } 2275 } 2276 } 2277 } 2278 2279 /* Enable ACG feature in host mode, if supported */ 2280 dwc2_enable_acg(hsotg); 2281 2282 /* Turn on the vbus power */ 2283 dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); 2284 if (hsotg->op_state == OTG_STATE_A_HOST) { 2285 u32 hprt0 = dwc2_read_hprt0(hsotg); 2286 2287 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", 2288 !!(hprt0 & HPRT0_PWR)); 2289 if (!(hprt0 & HPRT0_PWR)) { 2290 hprt0 |= HPRT0_PWR; 2291 dwc2_writel(hsotg, hprt0, HPRT0); 2292 } 2293 } 2294 2295 dwc2_enable_host_interrupts(hsotg); 2296 } 2297 2298 /* 2299 * Initializes dynamic portions of the DWC_otg HCD state 2300 * 2301 * Must be called with interrupt disabled and spinlock held 2302 */ 2303 static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) 2304 { 2305 struct dwc2_host_chan *chan, *chan_tmp; 2306 int num_channels; 2307 int i; 2308 2309 hsotg->flags.d32 = 0; 2310 hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; 2311 2312 if (hsotg->params.uframe_sched) { 2313 hsotg->available_host_channels = 2314 hsotg->params.host_channels; 2315 } else { 2316 hsotg->non_periodic_channels = 0; 2317 hsotg->periodic_channels = 0; 2318 } 2319 2320 /* 2321 * Put all channels in the free channel list and clean up channel 2322 * states 2323 */ 2324 list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, 2325 hc_list_entry) 2326 list_del_init(&chan->hc_list_entry); 2327 2328 num_channels = hsotg->params.host_channels; 2329 for (i = 0; i < num_channels; i++) { 2330 chan = hsotg->hc_ptr_array[i]; 2331 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); 2332 dwc2_hc_cleanup(hsotg, chan); 2333 } 2334 2335 /* Initialize the DWC core for host mode operation */ 2336 dwc2_core_host_init(hsotg); 2337 } 2338 2339 static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, 2340 struct dwc2_host_chan *chan, 2341 struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) 2342 { 2343 int hub_addr, hub_port; 2344 2345 chan->do_split = 1; 2346 chan->xact_pos = qtd->isoc_split_pos; 2347 chan->complete_split = qtd->complete_split; 2348 dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); 2349 chan->hub_addr = (u8)hub_addr; 2350 chan->hub_port = (u8)hub_port; 2351 } 2352 2353 static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, 2354 struct dwc2_host_chan *chan, 2355 struct dwc2_qtd *qtd) 2356 { 2357 struct dwc2_hcd_urb *urb = qtd->urb; 2358 struct dwc2_hcd_iso_packet_desc *frame_desc; 2359 2360 switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { 2361 case USB_ENDPOINT_XFER_CONTROL: 2362 chan->ep_type = USB_ENDPOINT_XFER_CONTROL; 2363 2364 switch (qtd->control_phase) { 2365 case DWC2_CONTROL_SETUP: 2366 dev_vdbg(hsotg->dev, " Control setup transaction\n"); 2367 chan->do_ping = 0; 2368 chan->ep_is_in = 0; 2369 chan->data_pid_start = DWC2_HC_PID_SETUP; 2370 if (hsotg->params.host_dma) 2371 chan->xfer_dma = urb->setup_dma; 2372 else 2373 chan->xfer_buf = urb->setup_packet; 2374 chan->xfer_len = 8; 2375 break; 2376 2377 case DWC2_CONTROL_DATA: 2378 dev_vdbg(hsotg->dev, " Control data transaction\n"); 2379 chan->data_pid_start = qtd->data_toggle; 2380 break; 2381 2382 case DWC2_CONTROL_STATUS: 2383 /* 2384 * Direction is opposite of data direction or IN if no 2385 * data 2386 */ 2387 dev_vdbg(hsotg->dev, " Control status transaction\n"); 2388 if (urb->length == 0) 2389 chan->ep_is_in = 1; 2390 else 2391 chan->ep_is_in = 2392 dwc2_hcd_is_pipe_out(&urb->pipe_info); 2393 if (chan->ep_is_in) 2394 chan->do_ping = 0; 2395 chan->data_pid_start = DWC2_HC_PID_DATA1; 2396 chan->xfer_len = 0; 2397 if (hsotg->params.host_dma) 2398 chan->xfer_dma = hsotg->status_buf_dma; 2399 else 2400 chan->xfer_buf = hsotg->status_buf; 2401 break; 2402 } 2403 break; 2404 2405 case USB_ENDPOINT_XFER_BULK: 2406 chan->ep_type = USB_ENDPOINT_XFER_BULK; 2407 break; 2408 2409 case USB_ENDPOINT_XFER_INT: 2410 chan->ep_type = USB_ENDPOINT_XFER_INT; 2411 break; 2412 2413 case USB_ENDPOINT_XFER_ISOC: 2414 chan->ep_type = USB_ENDPOINT_XFER_ISOC; 2415 if (hsotg->params.dma_desc_enable) 2416 break; 2417 2418 frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; 2419 frame_desc->status = 0; 2420 2421 if (hsotg->params.host_dma) { 2422 chan->xfer_dma = urb->dma; 2423 chan->xfer_dma += frame_desc->offset + 2424 qtd->isoc_split_offset; 2425 } else { 2426 chan->xfer_buf = urb->buf; 2427 chan->xfer_buf += frame_desc->offset + 2428 qtd->isoc_split_offset; 2429 } 2430 2431 chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; 2432 2433 if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { 2434 if (chan->xfer_len <= 188) 2435 chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; 2436 else 2437 chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; 2438 } 2439 break; 2440 } 2441 } 2442 2443 static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, 2444 struct dwc2_qh *qh, 2445 struct dwc2_host_chan *chan) 2446 { 2447 if (!hsotg->unaligned_cache || 2448 chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) 2449 return -ENOMEM; 2450 2451 if (!qh->dw_align_buf) { 2452 qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, 2453 GFP_ATOMIC | GFP_DMA); 2454 if (!qh->dw_align_buf) 2455 return -ENOMEM; 2456 } 2457 2458 qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, 2459 DWC2_KMEM_UNALIGNED_BUF_SIZE, 2460 DMA_FROM_DEVICE); 2461 2462 if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { 2463 dev_err(hsotg->dev, "can't map align_buf\n"); 2464 chan->align_buf = 0; 2465 return -EINVAL; 2466 } 2467 2468 chan->align_buf = qh->dw_align_buf_dma; 2469 return 0; 2470 } 2471 2472 #define DWC2_USB_DMA_ALIGN 4 2473 2474 static void dwc2_free_dma_aligned_buffer(struct urb *urb) 2475 { 2476 void *stored_xfer_buffer; 2477 size_t length; 2478 2479 if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) 2480 return; 2481 2482 /* Restore urb->transfer_buffer from the end of the allocated area */ 2483 memcpy(&stored_xfer_buffer, 2484 PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length, 2485 dma_get_cache_alignment()), 2486 sizeof(urb->transfer_buffer)); 2487 2488 if (usb_urb_dir_in(urb)) { 2489 if (usb_pipeisoc(urb->pipe)) 2490 length = urb->transfer_buffer_length; 2491 else 2492 length = urb->actual_length; 2493 2494 memcpy(stored_xfer_buffer, urb->transfer_buffer, length); 2495 } 2496 kfree(urb->transfer_buffer); 2497 urb->transfer_buffer = stored_xfer_buffer; 2498 2499 urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; 2500 } 2501 2502 static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) 2503 { 2504 void *kmalloc_ptr; 2505 size_t kmalloc_size; 2506 2507 if (urb->num_sgs || urb->sg || 2508 urb->transfer_buffer_length == 0 || 2509 !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) 2510 return 0; 2511 2512 /* 2513 * Allocate a buffer with enough padding for original transfer_buffer 2514 * pointer. This allocation is guaranteed to be aligned properly for 2515 * DMA 2516 */ 2517 kmalloc_size = urb->transfer_buffer_length + 2518 (dma_get_cache_alignment() - 1) + 2519 sizeof(urb->transfer_buffer); 2520 2521 kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); 2522 if (!kmalloc_ptr) 2523 return -ENOMEM; 2524 2525 /* 2526 * Position value of original urb->transfer_buffer pointer to the end 2527 * of allocation for later referencing 2528 */ 2529 memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length, 2530 dma_get_cache_alignment()), 2531 &urb->transfer_buffer, sizeof(urb->transfer_buffer)); 2532 2533 if (usb_urb_dir_out(urb)) 2534 memcpy(kmalloc_ptr, urb->transfer_buffer, 2535 urb->transfer_buffer_length); 2536 urb->transfer_buffer = kmalloc_ptr; 2537 2538 urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; 2539 2540 return 0; 2541 } 2542 2543 static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, 2544 gfp_t mem_flags) 2545 { 2546 int ret; 2547 2548 /* We assume setup_dma is always aligned; warn if not */ 2549 WARN_ON_ONCE(urb->setup_dma && 2550 (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1))); 2551 2552 ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags); 2553 if (ret) 2554 return ret; 2555 2556 ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); 2557 if (ret) 2558 dwc2_free_dma_aligned_buffer(urb); 2559 2560 return ret; 2561 } 2562 2563 static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) 2564 { 2565 usb_hcd_unmap_urb_for_dma(hcd, urb); 2566 dwc2_free_dma_aligned_buffer(urb); 2567 } 2568 2569 /** 2570 * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host 2571 * channel and initializes the host channel to perform the transactions. The 2572 * host channel is removed from the free list. 2573 * 2574 * @hsotg: The HCD state structure 2575 * @qh: Transactions from the first QTD for this QH are selected and assigned 2576 * to a free host channel 2577 */ 2578 static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) 2579 { 2580 struct dwc2_host_chan *chan; 2581 struct dwc2_hcd_urb *urb; 2582 struct dwc2_qtd *qtd; 2583 2584 if (dbg_qh(qh)) 2585 dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); 2586 2587 if (list_empty(&qh->qtd_list)) { 2588 dev_dbg(hsotg->dev, "No QTDs in QH list\n"); 2589 return -ENOMEM; 2590 } 2591 2592 if (list_empty(&hsotg->free_hc_list)) { 2593 dev_dbg(hsotg->dev, "No free channel to assign\n"); 2594 return -ENOMEM; 2595 } 2596 2597 chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, 2598 hc_list_entry); 2599 2600 /* Remove host channel from free list */ 2601 list_del_init(&chan->hc_list_entry); 2602 2603 qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); 2604 urb = qtd->urb; 2605 qh->channel = chan; 2606 qtd->in_process = 1; 2607 2608 /* 2609 * Use usb_pipedevice to determine device address. This address is 2610 * 0 before the SET_ADDRESS command and the correct address afterward. 2611 */ 2612 chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); 2613 chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); 2614 chan->speed = qh->dev_speed; 2615 chan->max_packet = qh->maxp; 2616 2617 chan->xfer_started = 0; 2618 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; 2619 chan->error_state = (qtd->error_count > 0); 2620 chan->halt_on_queue = 0; 2621 chan->halt_pending = 0; 2622 chan->requests = 0; 2623 2624 /* 2625 * The following values may be modified in the transfer type section 2626 * below. The xfer_len value may be reduced when the transfer is 2627 * started to accommodate the max widths of the XferSize and PktCnt 2628 * fields in the HCTSIZn register. 2629 */ 2630 2631 chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); 2632 if (chan->ep_is_in) 2633 chan->do_ping = 0; 2634 else 2635 chan->do_ping = qh->ping_state; 2636 2637 chan->data_pid_start = qh->data_toggle; 2638 chan->multi_count = 1; 2639 2640 if (urb->actual_length > urb->length && 2641 !dwc2_hcd_is_pipe_in(&urb->pipe_info)) 2642 urb->actual_length = urb->length; 2643 2644 if (hsotg->params.host_dma) 2645 chan->xfer_dma = urb->dma + urb->actual_length; 2646 else 2647 chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; 2648 2649 chan->xfer_len = urb->length - urb->actual_length; 2650 chan->xfer_count = 0; 2651 2652 /* Set the split attributes if required */ 2653 if (qh->do_split) 2654 dwc2_hc_init_split(hsotg, chan, qtd, urb); 2655 else 2656 chan->do_split = 0; 2657 2658 /* Set the transfer attributes */ 2659 dwc2_hc_init_xfer(hsotg, chan, qtd); 2660 2661 /* For non-dword aligned buffers */ 2662 if (hsotg->params.host_dma && qh->do_split && 2663 chan->ep_is_in && (chan->xfer_dma & 0x3)) { 2664 dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); 2665 if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { 2666 dev_err(hsotg->dev, 2667 "Failed to allocate memory to handle non-aligned buffer\n"); 2668 /* Add channel back to free list */ 2669 chan->align_buf = 0; 2670 chan->multi_count = 0; 2671 list_add_tail(&chan->hc_list_entry, 2672 &hsotg->free_hc_list); 2673 qtd->in_process = 0; 2674 qh->channel = NULL; 2675 return -ENOMEM; 2676 } 2677 } else { 2678 /* 2679 * We assume that DMA is always aligned in non-split 2680 * case or split out case. Warn if not. 2681 */ 2682 WARN_ON_ONCE(hsotg->params.host_dma && 2683 (chan->xfer_dma & 0x3)); 2684 chan->align_buf = 0; 2685 } 2686 2687 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 2688 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 2689 /* 2690 * This value may be modified when the transfer is started 2691 * to reflect the actual transfer length 2692 */ 2693 chan->multi_count = qh->maxp_mult; 2694 2695 if (hsotg->params.dma_desc_enable) { 2696 chan->desc_list_addr = qh->desc_list_dma; 2697 chan->desc_list_sz = qh->desc_list_sz; 2698 } 2699 2700 dwc2_hc_init(hsotg, chan); 2701 chan->qh = qh; 2702 2703 return 0; 2704 } 2705 2706 /** 2707 * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer 2708 * schedule and assigns them to available host channels. Called from the HCD 2709 * interrupt handler functions. 2710 * 2711 * @hsotg: The HCD state structure 2712 * 2713 * Return: The types of new transactions that were assigned to host channels 2714 */ 2715 enum dwc2_transaction_type dwc2_hcd_select_transactions( 2716 struct dwc2_hsotg *hsotg) 2717 { 2718 enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; 2719 struct list_head *qh_ptr; 2720 struct dwc2_qh *qh; 2721 int num_channels; 2722 2723 #ifdef DWC2_DEBUG_SOF 2724 dev_vdbg(hsotg->dev, " Select Transactions\n"); 2725 #endif 2726 2727 /* Process entries in the periodic ready list */ 2728 qh_ptr = hsotg->periodic_sched_ready.next; 2729 while (qh_ptr != &hsotg->periodic_sched_ready) { 2730 if (list_empty(&hsotg->free_hc_list)) 2731 break; 2732 if (hsotg->params.uframe_sched) { 2733 if (hsotg->available_host_channels <= 1) 2734 break; 2735 hsotg->available_host_channels--; 2736 } 2737 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2738 if (dwc2_assign_and_init_hc(hsotg, qh)) 2739 break; 2740 2741 /* 2742 * Move the QH from the periodic ready schedule to the 2743 * periodic assigned schedule 2744 */ 2745 qh_ptr = qh_ptr->next; 2746 list_move_tail(&qh->qh_list_entry, 2747 &hsotg->periodic_sched_assigned); 2748 ret_val = DWC2_TRANSACTION_PERIODIC; 2749 } 2750 2751 /* 2752 * Process entries in the inactive portion of the non-periodic 2753 * schedule. Some free host channels may not be used if they are 2754 * reserved for periodic transfers. 2755 */ 2756 num_channels = hsotg->params.host_channels; 2757 qh_ptr = hsotg->non_periodic_sched_inactive.next; 2758 while (qh_ptr != &hsotg->non_periodic_sched_inactive) { 2759 if (!hsotg->params.uframe_sched && 2760 hsotg->non_periodic_channels >= num_channels - 2761 hsotg->periodic_channels) 2762 break; 2763 if (list_empty(&hsotg->free_hc_list)) 2764 break; 2765 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2766 if (hsotg->params.uframe_sched) { 2767 if (hsotg->available_host_channels < 1) 2768 break; 2769 hsotg->available_host_channels--; 2770 } 2771 2772 if (dwc2_assign_and_init_hc(hsotg, qh)) 2773 break; 2774 2775 /* 2776 * Move the QH from the non-periodic inactive schedule to the 2777 * non-periodic active schedule 2778 */ 2779 qh_ptr = qh_ptr->next; 2780 list_move_tail(&qh->qh_list_entry, 2781 &hsotg->non_periodic_sched_active); 2782 2783 if (ret_val == DWC2_TRANSACTION_NONE) 2784 ret_val = DWC2_TRANSACTION_NON_PERIODIC; 2785 else 2786 ret_val = DWC2_TRANSACTION_ALL; 2787 2788 if (!hsotg->params.uframe_sched) 2789 hsotg->non_periodic_channels++; 2790 } 2791 2792 return ret_val; 2793 } 2794 2795 /** 2796 * dwc2_queue_transaction() - Attempts to queue a single transaction request for 2797 * a host channel associated with either a periodic or non-periodic transfer 2798 * 2799 * @hsotg: The HCD state structure 2800 * @chan: Host channel descriptor associated with either a periodic or 2801 * non-periodic transfer 2802 * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO 2803 * for periodic transfers or the non-periodic Tx FIFO 2804 * for non-periodic transfers 2805 * 2806 * Return: 1 if a request is queued and more requests may be needed to 2807 * complete the transfer, 0 if no more requests are required for this 2808 * transfer, -1 if there is insufficient space in the Tx FIFO 2809 * 2810 * This function assumes that there is space available in the appropriate 2811 * request queue. For an OUT transfer or SETUP transaction in Slave mode, 2812 * it checks whether space is available in the appropriate Tx FIFO. 2813 * 2814 * Must be called with interrupt disabled and spinlock held 2815 */ 2816 static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, 2817 struct dwc2_host_chan *chan, 2818 u16 fifo_dwords_avail) 2819 { 2820 int retval = 0; 2821 2822 if (chan->do_split) 2823 /* Put ourselves on the list to keep order straight */ 2824 list_move_tail(&chan->split_order_list_entry, 2825 &hsotg->split_order); 2826 2827 if (hsotg->params.host_dma && chan->qh) { 2828 if (hsotg->params.dma_desc_enable) { 2829 if (!chan->xfer_started || 2830 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 2831 dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); 2832 chan->qh->ping_state = 0; 2833 } 2834 } else if (!chan->xfer_started) { 2835 dwc2_hc_start_transfer(hsotg, chan); 2836 chan->qh->ping_state = 0; 2837 } 2838 } else if (chan->halt_pending) { 2839 /* Don't queue a request if the channel has been halted */ 2840 } else if (chan->halt_on_queue) { 2841 dwc2_hc_halt(hsotg, chan, chan->halt_status); 2842 } else if (chan->do_ping) { 2843 if (!chan->xfer_started) 2844 dwc2_hc_start_transfer(hsotg, chan); 2845 } else if (!chan->ep_is_in || 2846 chan->data_pid_start == DWC2_HC_PID_SETUP) { 2847 if ((fifo_dwords_avail * 4) >= chan->max_packet) { 2848 if (!chan->xfer_started) { 2849 dwc2_hc_start_transfer(hsotg, chan); 2850 retval = 1; 2851 } else { 2852 retval = dwc2_hc_continue_transfer(hsotg, chan); 2853 } 2854 } else { 2855 retval = -1; 2856 } 2857 } else { 2858 if (!chan->xfer_started) { 2859 dwc2_hc_start_transfer(hsotg, chan); 2860 retval = 1; 2861 } else { 2862 retval = dwc2_hc_continue_transfer(hsotg, chan); 2863 } 2864 } 2865 2866 return retval; 2867 } 2868 2869 /* 2870 * Processes periodic channels for the next frame and queues transactions for 2871 * these channels to the DWC_otg controller. After queueing transactions, the 2872 * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions 2873 * to queue as Periodic Tx FIFO or request queue space becomes available. 2874 * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. 2875 * 2876 * Must be called with interrupt disabled and spinlock held 2877 */ 2878 static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) 2879 { 2880 struct list_head *qh_ptr; 2881 struct dwc2_qh *qh; 2882 u32 tx_status; 2883 u32 fspcavail; 2884 u32 gintmsk; 2885 int status; 2886 bool no_queue_space = false; 2887 bool no_fifo_space = false; 2888 u32 qspcavail; 2889 2890 /* If empty list then just adjust interrupt enables */ 2891 if (list_empty(&hsotg->periodic_sched_assigned)) 2892 goto exit; 2893 2894 if (dbg_perio()) 2895 dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); 2896 2897 tx_status = dwc2_readl(hsotg, HPTXSTS); 2898 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2899 TXSTS_QSPCAVAIL_SHIFT; 2900 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2901 TXSTS_FSPCAVAIL_SHIFT; 2902 2903 if (dbg_perio()) { 2904 dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", 2905 qspcavail); 2906 dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", 2907 fspcavail); 2908 } 2909 2910 qh_ptr = hsotg->periodic_sched_assigned.next; 2911 while (qh_ptr != &hsotg->periodic_sched_assigned) { 2912 tx_status = dwc2_readl(hsotg, HPTXSTS); 2913 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2914 TXSTS_QSPCAVAIL_SHIFT; 2915 if (qspcavail == 0) { 2916 no_queue_space = true; 2917 break; 2918 } 2919 2920 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2921 if (!qh->channel) { 2922 qh_ptr = qh_ptr->next; 2923 continue; 2924 } 2925 2926 /* Make sure EP's TT buffer is clean before queueing qtds */ 2927 if (qh->tt_buffer_dirty) { 2928 qh_ptr = qh_ptr->next; 2929 continue; 2930 } 2931 2932 /* 2933 * Set a flag if we're queuing high-bandwidth in slave mode. 2934 * The flag prevents any halts to get into the request queue in 2935 * the middle of multiple high-bandwidth packets getting queued. 2936 */ 2937 if (!hsotg->params.host_dma && 2938 qh->channel->multi_count > 1) 2939 hsotg->queuing_high_bandwidth = 1; 2940 2941 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2942 TXSTS_FSPCAVAIL_SHIFT; 2943 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 2944 if (status < 0) { 2945 no_fifo_space = true; 2946 break; 2947 } 2948 2949 /* 2950 * In Slave mode, stay on the current transfer until there is 2951 * nothing more to do or the high-bandwidth request count is 2952 * reached. In DMA mode, only need to queue one request. The 2953 * controller automatically handles multiple packets for 2954 * high-bandwidth transfers. 2955 */ 2956 if (hsotg->params.host_dma || status == 0 || 2957 qh->channel->requests == qh->channel->multi_count) { 2958 qh_ptr = qh_ptr->next; 2959 /* 2960 * Move the QH from the periodic assigned schedule to 2961 * the periodic queued schedule 2962 */ 2963 list_move_tail(&qh->qh_list_entry, 2964 &hsotg->periodic_sched_queued); 2965 2966 /* done queuing high bandwidth */ 2967 hsotg->queuing_high_bandwidth = 0; 2968 } 2969 } 2970 2971 exit: 2972 if (no_queue_space || no_fifo_space || 2973 (!hsotg->params.host_dma && 2974 !list_empty(&hsotg->periodic_sched_assigned))) { 2975 /* 2976 * May need to queue more transactions as the request 2977 * queue or Tx FIFO empties. Enable the periodic Tx 2978 * FIFO empty interrupt. (Always use the half-empty 2979 * level to ensure that new requests are loaded as 2980 * soon as possible.) 2981 */ 2982 gintmsk = dwc2_readl(hsotg, GINTMSK); 2983 if (!(gintmsk & GINTSTS_PTXFEMP)) { 2984 gintmsk |= GINTSTS_PTXFEMP; 2985 dwc2_writel(hsotg, gintmsk, GINTMSK); 2986 } 2987 } else { 2988 /* 2989 * Disable the Tx FIFO empty interrupt since there are 2990 * no more transactions that need to be queued right 2991 * now. This function is called from interrupt 2992 * handlers to queue more transactions as transfer 2993 * states change. 2994 */ 2995 gintmsk = dwc2_readl(hsotg, GINTMSK); 2996 if (gintmsk & GINTSTS_PTXFEMP) { 2997 gintmsk &= ~GINTSTS_PTXFEMP; 2998 dwc2_writel(hsotg, gintmsk, GINTMSK); 2999 } 3000 } 3001 } 3002 3003 /* 3004 * Processes active non-periodic channels and queues transactions for these 3005 * channels to the DWC_otg controller. After queueing transactions, the NP Tx 3006 * FIFO Empty interrupt is enabled if there are more transactions to queue as 3007 * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx 3008 * FIFO Empty interrupt is disabled. 3009 * 3010 * Must be called with interrupt disabled and spinlock held 3011 */ 3012 static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) 3013 { 3014 struct list_head *orig_qh_ptr; 3015 struct dwc2_qh *qh; 3016 u32 tx_status; 3017 u32 qspcavail; 3018 u32 fspcavail; 3019 u32 gintmsk; 3020 int status; 3021 int no_queue_space = 0; 3022 int no_fifo_space = 0; 3023 int more_to_do = 0; 3024 3025 dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); 3026 3027 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3028 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3029 TXSTS_QSPCAVAIL_SHIFT; 3030 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3031 TXSTS_FSPCAVAIL_SHIFT; 3032 dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", 3033 qspcavail); 3034 dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", 3035 fspcavail); 3036 3037 /* 3038 * Keep track of the starting point. Skip over the start-of-list 3039 * entry. 3040 */ 3041 if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) 3042 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3043 orig_qh_ptr = hsotg->non_periodic_qh_ptr; 3044 3045 /* 3046 * Process once through the active list or until no more space is 3047 * available in the request queue or the Tx FIFO 3048 */ 3049 do { 3050 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3051 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3052 TXSTS_QSPCAVAIL_SHIFT; 3053 if (!hsotg->params.host_dma && qspcavail == 0) { 3054 no_queue_space = 1; 3055 break; 3056 } 3057 3058 qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, 3059 qh_list_entry); 3060 if (!qh->channel) 3061 goto next; 3062 3063 /* Make sure EP's TT buffer is clean before queueing qtds */ 3064 if (qh->tt_buffer_dirty) 3065 goto next; 3066 3067 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3068 TXSTS_FSPCAVAIL_SHIFT; 3069 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 3070 3071 if (status > 0) { 3072 more_to_do = 1; 3073 } else if (status < 0) { 3074 no_fifo_space = 1; 3075 break; 3076 } 3077 next: 3078 /* Advance to next QH, skipping start-of-list entry */ 3079 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3080 if (hsotg->non_periodic_qh_ptr == 3081 &hsotg->non_periodic_sched_active) 3082 hsotg->non_periodic_qh_ptr = 3083 hsotg->non_periodic_qh_ptr->next; 3084 } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); 3085 3086 if (!hsotg->params.host_dma) { 3087 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3088 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3089 TXSTS_QSPCAVAIL_SHIFT; 3090 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3091 TXSTS_FSPCAVAIL_SHIFT; 3092 dev_vdbg(hsotg->dev, 3093 " NP Tx Req Queue Space Avail (after queue): %d\n", 3094 qspcavail); 3095 dev_vdbg(hsotg->dev, 3096 " NP Tx FIFO Space Avail (after queue): %d\n", 3097 fspcavail); 3098 3099 if (more_to_do || no_queue_space || no_fifo_space) { 3100 /* 3101 * May need to queue more transactions as the request 3102 * queue or Tx FIFO empties. Enable the non-periodic 3103 * Tx FIFO empty interrupt. (Always use the half-empty 3104 * level to ensure that new requests are loaded as 3105 * soon as possible.) 3106 */ 3107 gintmsk = dwc2_readl(hsotg, GINTMSK); 3108 gintmsk |= GINTSTS_NPTXFEMP; 3109 dwc2_writel(hsotg, gintmsk, GINTMSK); 3110 } else { 3111 /* 3112 * Disable the Tx FIFO empty interrupt since there are 3113 * no more transactions that need to be queued right 3114 * now. This function is called from interrupt 3115 * handlers to queue more transactions as transfer 3116 * states change. 3117 */ 3118 gintmsk = dwc2_readl(hsotg, GINTMSK); 3119 gintmsk &= ~GINTSTS_NPTXFEMP; 3120 dwc2_writel(hsotg, gintmsk, GINTMSK); 3121 } 3122 } 3123 } 3124 3125 /** 3126 * dwc2_hcd_queue_transactions() - Processes the currently active host channels 3127 * and queues transactions for these channels to the DWC_otg controller. Called 3128 * from the HCD interrupt handler functions. 3129 * 3130 * @hsotg: The HCD state structure 3131 * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, 3132 * or both) 3133 * 3134 * Must be called with interrupt disabled and spinlock held 3135 */ 3136 void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, 3137 enum dwc2_transaction_type tr_type) 3138 { 3139 #ifdef DWC2_DEBUG_SOF 3140 dev_vdbg(hsotg->dev, "Queue Transactions\n"); 3141 #endif 3142 /* Process host channels associated with periodic transfers */ 3143 if (tr_type == DWC2_TRANSACTION_PERIODIC || 3144 tr_type == DWC2_TRANSACTION_ALL) 3145 dwc2_process_periodic_channels(hsotg); 3146 3147 /* Process host channels associated with non-periodic transfers */ 3148 if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || 3149 tr_type == DWC2_TRANSACTION_ALL) { 3150 if (!list_empty(&hsotg->non_periodic_sched_active)) { 3151 dwc2_process_non_periodic_channels(hsotg); 3152 } else { 3153 /* 3154 * Ensure NP Tx FIFO empty interrupt is disabled when 3155 * there are no non-periodic transfers to process 3156 */ 3157 u32 gintmsk = dwc2_readl(hsotg, GINTMSK); 3158 3159 gintmsk &= ~GINTSTS_NPTXFEMP; 3160 dwc2_writel(hsotg, gintmsk, GINTMSK); 3161 } 3162 } 3163 } 3164 3165 static void dwc2_conn_id_status_change(struct work_struct *work) 3166 { 3167 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 3168 wf_otg); 3169 u32 count = 0; 3170 u32 gotgctl; 3171 unsigned long flags; 3172 3173 dev_dbg(hsotg->dev, "%s()\n", __func__); 3174 3175 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3176 dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); 3177 dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", 3178 !!(gotgctl & GOTGCTL_CONID_B)); 3179 3180 /* B-Device connector (Device Mode) */ 3181 if (gotgctl & GOTGCTL_CONID_B) { 3182 dwc2_vbus_supply_exit(hsotg); 3183 /* Wait for switch to device mode */ 3184 dev_dbg(hsotg->dev, "connId B\n"); 3185 if (hsotg->bus_suspended) { 3186 dev_info(hsotg->dev, 3187 "Do port resume before switching to device mode\n"); 3188 dwc2_port_resume(hsotg); 3189 } 3190 while (!dwc2_is_device_mode(hsotg)) { 3191 dev_info(hsotg->dev, 3192 "Waiting for Peripheral Mode, Mode=%s\n", 3193 dwc2_is_host_mode(hsotg) ? "Host" : 3194 "Peripheral"); 3195 msleep(20); 3196 /* 3197 * Sometimes the initial GOTGCTRL read is wrong, so 3198 * check it again and jump to host mode if that was 3199 * the case. 3200 */ 3201 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3202 if (!(gotgctl & GOTGCTL_CONID_B)) 3203 goto host; 3204 if (++count > 250) 3205 break; 3206 } 3207 if (count > 250) 3208 dev_err(hsotg->dev, 3209 "Connection id status change timed out\n"); 3210 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 3211 dwc2_core_init(hsotg, false); 3212 dwc2_enable_global_interrupts(hsotg); 3213 spin_lock_irqsave(&hsotg->lock, flags); 3214 dwc2_hsotg_core_init_disconnected(hsotg, false); 3215 spin_unlock_irqrestore(&hsotg->lock, flags); 3216 /* Enable ACG feature in device mode,if supported */ 3217 dwc2_enable_acg(hsotg); 3218 dwc2_hsotg_core_connect(hsotg); 3219 } else { 3220 host: 3221 /* A-Device connector (Host Mode) */ 3222 dev_dbg(hsotg->dev, "connId A\n"); 3223 while (!dwc2_is_host_mode(hsotg)) { 3224 dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", 3225 dwc2_is_host_mode(hsotg) ? 3226 "Host" : "Peripheral"); 3227 msleep(20); 3228 if (++count > 250) 3229 break; 3230 } 3231 if (count > 250) 3232 dev_err(hsotg->dev, 3233 "Connection id status change timed out\n"); 3234 3235 spin_lock_irqsave(&hsotg->lock, flags); 3236 dwc2_hsotg_disconnect(hsotg); 3237 spin_unlock_irqrestore(&hsotg->lock, flags); 3238 3239 hsotg->op_state = OTG_STATE_A_HOST; 3240 /* Initialize the Core for Host mode */ 3241 dwc2_core_init(hsotg, false); 3242 dwc2_enable_global_interrupts(hsotg); 3243 dwc2_hcd_start(hsotg); 3244 } 3245 } 3246 3247 static void dwc2_wakeup_detected(struct timer_list *t) 3248 { 3249 struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer); 3250 u32 hprt0; 3251 3252 dev_dbg(hsotg->dev, "%s()\n", __func__); 3253 3254 /* 3255 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms 3256 * so that OPT tests pass with all PHYs.) 3257 */ 3258 hprt0 = dwc2_read_hprt0(hsotg); 3259 dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); 3260 hprt0 &= ~HPRT0_RES; 3261 dwc2_writel(hsotg, hprt0, HPRT0); 3262 dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", 3263 dwc2_readl(hsotg, HPRT0)); 3264 3265 dwc2_hcd_rem_wakeup(hsotg); 3266 hsotg->bus_suspended = false; 3267 3268 /* Change to L0 state */ 3269 hsotg->lx_state = DWC2_L0; 3270 } 3271 3272 static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) 3273 { 3274 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 3275 3276 return hcd->self.b_hnp_enable; 3277 } 3278 3279 /* Must NOT be called with interrupt disabled or spinlock held */ 3280 static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) 3281 { 3282 unsigned long flags; 3283 u32 hprt0; 3284 u32 pcgctl; 3285 u32 gotgctl; 3286 3287 dev_dbg(hsotg->dev, "%s()\n", __func__); 3288 3289 spin_lock_irqsave(&hsotg->lock, flags); 3290 3291 if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { 3292 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3293 gotgctl |= GOTGCTL_HSTSETHNPEN; 3294 dwc2_writel(hsotg, gotgctl, GOTGCTL); 3295 hsotg->op_state = OTG_STATE_A_SUSPEND; 3296 } 3297 3298 hprt0 = dwc2_read_hprt0(hsotg); 3299 hprt0 |= HPRT0_SUSP; 3300 dwc2_writel(hsotg, hprt0, HPRT0); 3301 3302 hsotg->bus_suspended = true; 3303 3304 /* 3305 * If power_down is supported, Phy clock will be suspended 3306 * after registers are backuped. 3307 */ 3308 if (!hsotg->params.power_down) { 3309 /* Suspend the Phy Clock */ 3310 pcgctl = dwc2_readl(hsotg, PCGCTL); 3311 pcgctl |= PCGCTL_STOPPCLK; 3312 dwc2_writel(hsotg, pcgctl, PCGCTL); 3313 udelay(10); 3314 } 3315 3316 /* For HNP the bus must be suspended for at least 200ms */ 3317 if (dwc2_host_is_b_hnp_enabled(hsotg)) { 3318 pcgctl = dwc2_readl(hsotg, PCGCTL); 3319 pcgctl &= ~PCGCTL_STOPPCLK; 3320 dwc2_writel(hsotg, pcgctl, PCGCTL); 3321 3322 spin_unlock_irqrestore(&hsotg->lock, flags); 3323 3324 msleep(200); 3325 } else { 3326 spin_unlock_irqrestore(&hsotg->lock, flags); 3327 } 3328 } 3329 3330 /* Must NOT be called with interrupt disabled or spinlock held */ 3331 static void dwc2_port_resume(struct dwc2_hsotg *hsotg) 3332 { 3333 unsigned long flags; 3334 u32 hprt0; 3335 u32 pcgctl; 3336 3337 spin_lock_irqsave(&hsotg->lock, flags); 3338 3339 /* 3340 * If power_down is supported, Phy clock is already resumed 3341 * after registers restore. 3342 */ 3343 if (!hsotg->params.power_down) { 3344 pcgctl = dwc2_readl(hsotg, PCGCTL); 3345 pcgctl &= ~PCGCTL_STOPPCLK; 3346 dwc2_writel(hsotg, pcgctl, PCGCTL); 3347 spin_unlock_irqrestore(&hsotg->lock, flags); 3348 msleep(20); 3349 spin_lock_irqsave(&hsotg->lock, flags); 3350 } 3351 3352 hprt0 = dwc2_read_hprt0(hsotg); 3353 hprt0 |= HPRT0_RES; 3354 hprt0 &= ~HPRT0_SUSP; 3355 dwc2_writel(hsotg, hprt0, HPRT0); 3356 spin_unlock_irqrestore(&hsotg->lock, flags); 3357 3358 msleep(USB_RESUME_TIMEOUT); 3359 3360 spin_lock_irqsave(&hsotg->lock, flags); 3361 hprt0 = dwc2_read_hprt0(hsotg); 3362 hprt0 &= ~(HPRT0_RES | HPRT0_SUSP); 3363 dwc2_writel(hsotg, hprt0, HPRT0); 3364 hsotg->bus_suspended = false; 3365 spin_unlock_irqrestore(&hsotg->lock, flags); 3366 } 3367 3368 /* Handles hub class-specific requests */ 3369 static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, 3370 u16 wvalue, u16 windex, char *buf, u16 wlength) 3371 { 3372 struct usb_hub_descriptor *hub_desc; 3373 int retval = 0; 3374 u32 hprt0; 3375 u32 port_status; 3376 u32 speed; 3377 u32 pcgctl; 3378 u32 pwr; 3379 3380 switch (typereq) { 3381 case ClearHubFeature: 3382 dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); 3383 3384 switch (wvalue) { 3385 case C_HUB_LOCAL_POWER: 3386 case C_HUB_OVER_CURRENT: 3387 /* Nothing required here */ 3388 break; 3389 3390 default: 3391 retval = -EINVAL; 3392 dev_err(hsotg->dev, 3393 "ClearHubFeature request %1xh unknown\n", 3394 wvalue); 3395 } 3396 break; 3397 3398 case ClearPortFeature: 3399 if (wvalue != USB_PORT_FEAT_L1) 3400 if (!windex || windex > 1) 3401 goto error; 3402 switch (wvalue) { 3403 case USB_PORT_FEAT_ENABLE: 3404 dev_dbg(hsotg->dev, 3405 "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); 3406 hprt0 = dwc2_read_hprt0(hsotg); 3407 hprt0 |= HPRT0_ENA; 3408 dwc2_writel(hsotg, hprt0, HPRT0); 3409 break; 3410 3411 case USB_PORT_FEAT_SUSPEND: 3412 dev_dbg(hsotg->dev, 3413 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); 3414 3415 if (hsotg->bus_suspended) { 3416 if (hsotg->hibernated) 3417 dwc2_exit_hibernation(hsotg, 0, 0, 1); 3418 else 3419 dwc2_port_resume(hsotg); 3420 } 3421 break; 3422 3423 case USB_PORT_FEAT_POWER: 3424 dev_dbg(hsotg->dev, 3425 "ClearPortFeature USB_PORT_FEAT_POWER\n"); 3426 hprt0 = dwc2_read_hprt0(hsotg); 3427 pwr = hprt0 & HPRT0_PWR; 3428 hprt0 &= ~HPRT0_PWR; 3429 dwc2_writel(hsotg, hprt0, HPRT0); 3430 if (pwr) 3431 dwc2_vbus_supply_exit(hsotg); 3432 break; 3433 3434 case USB_PORT_FEAT_INDICATOR: 3435 dev_dbg(hsotg->dev, 3436 "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); 3437 /* Port indicator not supported */ 3438 break; 3439 3440 case USB_PORT_FEAT_C_CONNECTION: 3441 /* 3442 * Clears driver's internal Connect Status Change flag 3443 */ 3444 dev_dbg(hsotg->dev, 3445 "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); 3446 hsotg->flags.b.port_connect_status_change = 0; 3447 break; 3448 3449 case USB_PORT_FEAT_C_RESET: 3450 /* Clears driver's internal Port Reset Change flag */ 3451 dev_dbg(hsotg->dev, 3452 "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); 3453 hsotg->flags.b.port_reset_change = 0; 3454 break; 3455 3456 case USB_PORT_FEAT_C_ENABLE: 3457 /* 3458 * Clears the driver's internal Port Enable/Disable 3459 * Change flag 3460 */ 3461 dev_dbg(hsotg->dev, 3462 "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); 3463 hsotg->flags.b.port_enable_change = 0; 3464 break; 3465 3466 case USB_PORT_FEAT_C_SUSPEND: 3467 /* 3468 * Clears the driver's internal Port Suspend Change 3469 * flag, which is set when resume signaling on the host 3470 * port is complete 3471 */ 3472 dev_dbg(hsotg->dev, 3473 "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); 3474 hsotg->flags.b.port_suspend_change = 0; 3475 break; 3476 3477 case USB_PORT_FEAT_C_PORT_L1: 3478 dev_dbg(hsotg->dev, 3479 "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); 3480 hsotg->flags.b.port_l1_change = 0; 3481 break; 3482 3483 case USB_PORT_FEAT_C_OVER_CURRENT: 3484 dev_dbg(hsotg->dev, 3485 "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); 3486 hsotg->flags.b.port_over_current_change = 0; 3487 break; 3488 3489 default: 3490 retval = -EINVAL; 3491 dev_err(hsotg->dev, 3492 "ClearPortFeature request %1xh unknown or unsupported\n", 3493 wvalue); 3494 } 3495 break; 3496 3497 case GetHubDescriptor: 3498 dev_dbg(hsotg->dev, "GetHubDescriptor\n"); 3499 hub_desc = (struct usb_hub_descriptor *)buf; 3500 hub_desc->bDescLength = 9; 3501 hub_desc->bDescriptorType = USB_DT_HUB; 3502 hub_desc->bNbrPorts = 1; 3503 hub_desc->wHubCharacteristics = 3504 cpu_to_le16(HUB_CHAR_COMMON_LPSM | 3505 HUB_CHAR_INDV_PORT_OCPM); 3506 hub_desc->bPwrOn2PwrGood = 1; 3507 hub_desc->bHubContrCurrent = 0; 3508 hub_desc->u.hs.DeviceRemovable[0] = 0; 3509 hub_desc->u.hs.DeviceRemovable[1] = 0xff; 3510 break; 3511 3512 case GetHubStatus: 3513 dev_dbg(hsotg->dev, "GetHubStatus\n"); 3514 memset(buf, 0, 4); 3515 break; 3516 3517 case GetPortStatus: 3518 dev_vdbg(hsotg->dev, 3519 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, 3520 hsotg->flags.d32); 3521 if (!windex || windex > 1) 3522 goto error; 3523 3524 port_status = 0; 3525 if (hsotg->flags.b.port_connect_status_change) 3526 port_status |= USB_PORT_STAT_C_CONNECTION << 16; 3527 if (hsotg->flags.b.port_enable_change) 3528 port_status |= USB_PORT_STAT_C_ENABLE << 16; 3529 if (hsotg->flags.b.port_suspend_change) 3530 port_status |= USB_PORT_STAT_C_SUSPEND << 16; 3531 if (hsotg->flags.b.port_l1_change) 3532 port_status |= USB_PORT_STAT_C_L1 << 16; 3533 if (hsotg->flags.b.port_reset_change) 3534 port_status |= USB_PORT_STAT_C_RESET << 16; 3535 if (hsotg->flags.b.port_over_current_change) { 3536 dev_warn(hsotg->dev, "Overcurrent change detected\n"); 3537 port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; 3538 } 3539 3540 if (!hsotg->flags.b.port_connect_status) { 3541 /* 3542 * The port is disconnected, which means the core is 3543 * either in device mode or it soon will be. Just 3544 * return 0's for the remainder of the port status 3545 * since the port register can't be read if the core 3546 * is in device mode. 3547 */ 3548 *(__le32 *)buf = cpu_to_le32(port_status); 3549 break; 3550 } 3551 3552 hprt0 = dwc2_readl(hsotg, HPRT0); 3553 dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); 3554 3555 if (hprt0 & HPRT0_CONNSTS) 3556 port_status |= USB_PORT_STAT_CONNECTION; 3557 if (hprt0 & HPRT0_ENA) 3558 port_status |= USB_PORT_STAT_ENABLE; 3559 if (hprt0 & HPRT0_SUSP) 3560 port_status |= USB_PORT_STAT_SUSPEND; 3561 if (hprt0 & HPRT0_OVRCURRACT) 3562 port_status |= USB_PORT_STAT_OVERCURRENT; 3563 if (hprt0 & HPRT0_RST) 3564 port_status |= USB_PORT_STAT_RESET; 3565 if (hprt0 & HPRT0_PWR) 3566 port_status |= USB_PORT_STAT_POWER; 3567 3568 speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 3569 if (speed == HPRT0_SPD_HIGH_SPEED) 3570 port_status |= USB_PORT_STAT_HIGH_SPEED; 3571 else if (speed == HPRT0_SPD_LOW_SPEED) 3572 port_status |= USB_PORT_STAT_LOW_SPEED; 3573 3574 if (hprt0 & HPRT0_TSTCTL_MASK) 3575 port_status |= USB_PORT_STAT_TEST; 3576 /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ 3577 3578 if (hsotg->params.dma_desc_fs_enable) { 3579 /* 3580 * Enable descriptor DMA only if a full speed 3581 * device is connected. 3582 */ 3583 if (hsotg->new_connection && 3584 ((port_status & 3585 (USB_PORT_STAT_CONNECTION | 3586 USB_PORT_STAT_HIGH_SPEED | 3587 USB_PORT_STAT_LOW_SPEED)) == 3588 USB_PORT_STAT_CONNECTION)) { 3589 u32 hcfg; 3590 3591 dev_info(hsotg->dev, "Enabling descriptor DMA mode\n"); 3592 hsotg->params.dma_desc_enable = true; 3593 hcfg = dwc2_readl(hsotg, HCFG); 3594 hcfg |= HCFG_DESCDMA; 3595 dwc2_writel(hsotg, hcfg, HCFG); 3596 hsotg->new_connection = false; 3597 } 3598 } 3599 3600 dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); 3601 *(__le32 *)buf = cpu_to_le32(port_status); 3602 break; 3603 3604 case SetHubFeature: 3605 dev_dbg(hsotg->dev, "SetHubFeature\n"); 3606 /* No HUB features supported */ 3607 break; 3608 3609 case SetPortFeature: 3610 dev_dbg(hsotg->dev, "SetPortFeature\n"); 3611 if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) 3612 goto error; 3613 3614 if (!hsotg->flags.b.port_connect_status) { 3615 /* 3616 * The port is disconnected, which means the core is 3617 * either in device mode or it soon will be. Just 3618 * return without doing anything since the port 3619 * register can't be written if the core is in device 3620 * mode. 3621 */ 3622 break; 3623 } 3624 3625 switch (wvalue) { 3626 case USB_PORT_FEAT_SUSPEND: 3627 dev_dbg(hsotg->dev, 3628 "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); 3629 if (windex != hsotg->otg_port) 3630 goto error; 3631 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION) 3632 dwc2_enter_hibernation(hsotg, 1); 3633 else 3634 dwc2_port_suspend(hsotg, windex); 3635 break; 3636 3637 case USB_PORT_FEAT_POWER: 3638 dev_dbg(hsotg->dev, 3639 "SetPortFeature - USB_PORT_FEAT_POWER\n"); 3640 hprt0 = dwc2_read_hprt0(hsotg); 3641 pwr = hprt0 & HPRT0_PWR; 3642 hprt0 |= HPRT0_PWR; 3643 dwc2_writel(hsotg, hprt0, HPRT0); 3644 if (!pwr) 3645 dwc2_vbus_supply_init(hsotg); 3646 break; 3647 3648 case USB_PORT_FEAT_RESET: 3649 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION && 3650 hsotg->hibernated) 3651 dwc2_exit_hibernation(hsotg, 0, 1, 1); 3652 hprt0 = dwc2_read_hprt0(hsotg); 3653 dev_dbg(hsotg->dev, 3654 "SetPortFeature - USB_PORT_FEAT_RESET\n"); 3655 pcgctl = dwc2_readl(hsotg, PCGCTL); 3656 pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); 3657 dwc2_writel(hsotg, pcgctl, PCGCTL); 3658 /* ??? Original driver does this */ 3659 dwc2_writel(hsotg, 0, PCGCTL); 3660 3661 hprt0 = dwc2_read_hprt0(hsotg); 3662 pwr = hprt0 & HPRT0_PWR; 3663 /* Clear suspend bit if resetting from suspend state */ 3664 hprt0 &= ~HPRT0_SUSP; 3665 3666 /* 3667 * When B-Host the Port reset bit is set in the Start 3668 * HCD Callback function, so that the reset is started 3669 * within 1ms of the HNP success interrupt 3670 */ 3671 if (!dwc2_hcd_is_b_host(hsotg)) { 3672 hprt0 |= HPRT0_PWR | HPRT0_RST; 3673 dev_dbg(hsotg->dev, 3674 "In host mode, hprt0=%08x\n", hprt0); 3675 dwc2_writel(hsotg, hprt0, HPRT0); 3676 if (!pwr) 3677 dwc2_vbus_supply_init(hsotg); 3678 } 3679 3680 /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ 3681 msleep(50); 3682 hprt0 &= ~HPRT0_RST; 3683 dwc2_writel(hsotg, hprt0, HPRT0); 3684 hsotg->lx_state = DWC2_L0; /* Now back to On state */ 3685 break; 3686 3687 case USB_PORT_FEAT_INDICATOR: 3688 dev_dbg(hsotg->dev, 3689 "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); 3690 /* Not supported */ 3691 break; 3692 3693 case USB_PORT_FEAT_TEST: 3694 hprt0 = dwc2_read_hprt0(hsotg); 3695 dev_dbg(hsotg->dev, 3696 "SetPortFeature - USB_PORT_FEAT_TEST\n"); 3697 hprt0 &= ~HPRT0_TSTCTL_MASK; 3698 hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT; 3699 dwc2_writel(hsotg, hprt0, HPRT0); 3700 break; 3701 3702 default: 3703 retval = -EINVAL; 3704 dev_err(hsotg->dev, 3705 "SetPortFeature %1xh unknown or unsupported\n", 3706 wvalue); 3707 break; 3708 } 3709 break; 3710 3711 default: 3712 error: 3713 retval = -EINVAL; 3714 dev_dbg(hsotg->dev, 3715 "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", 3716 typereq, windex, wvalue); 3717 break; 3718 } 3719 3720 return retval; 3721 } 3722 3723 static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) 3724 { 3725 int retval; 3726 3727 if (port != 1) 3728 return -EINVAL; 3729 3730 retval = (hsotg->flags.b.port_connect_status_change || 3731 hsotg->flags.b.port_reset_change || 3732 hsotg->flags.b.port_enable_change || 3733 hsotg->flags.b.port_suspend_change || 3734 hsotg->flags.b.port_over_current_change); 3735 3736 if (retval) { 3737 dev_dbg(hsotg->dev, 3738 "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); 3739 dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", 3740 hsotg->flags.b.port_connect_status_change); 3741 dev_dbg(hsotg->dev, " port_reset_change: %d\n", 3742 hsotg->flags.b.port_reset_change); 3743 dev_dbg(hsotg->dev, " port_enable_change: %d\n", 3744 hsotg->flags.b.port_enable_change); 3745 dev_dbg(hsotg->dev, " port_suspend_change: %d\n", 3746 hsotg->flags.b.port_suspend_change); 3747 dev_dbg(hsotg->dev, " port_over_current_change: %d\n", 3748 hsotg->flags.b.port_over_current_change); 3749 } 3750 3751 return retval; 3752 } 3753 3754 int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) 3755 { 3756 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3757 3758 #ifdef DWC2_DEBUG_SOF 3759 dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", 3760 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); 3761 #endif 3762 return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3763 } 3764 3765 int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us) 3766 { 3767 u32 hprt = dwc2_readl(hsotg, HPRT0); 3768 u32 hfir = dwc2_readl(hsotg, HFIR); 3769 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3770 unsigned int us_per_frame; 3771 unsigned int frame_number; 3772 unsigned int remaining; 3773 unsigned int interval; 3774 unsigned int phy_clks; 3775 3776 /* High speed has 125 us per (micro) frame; others are 1 ms per */ 3777 us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125; 3778 3779 /* Extract fields */ 3780 frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3781 remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT; 3782 interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT; 3783 3784 /* 3785 * Number of phy clocks since the last tick of the frame number after 3786 * "us" has passed. 3787 */ 3788 phy_clks = (interval - remaining) + 3789 DIV_ROUND_UP(interval * us, us_per_frame); 3790 3791 return dwc2_frame_num_inc(frame_number, phy_clks / interval); 3792 } 3793 3794 int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) 3795 { 3796 return hsotg->op_state == OTG_STATE_B_HOST; 3797 } 3798 3799 static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, 3800 int iso_desc_count, 3801 gfp_t mem_flags) 3802 { 3803 struct dwc2_hcd_urb *urb; 3804 3805 urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags); 3806 if (urb) 3807 urb->packet_count = iso_desc_count; 3808 return urb; 3809 } 3810 3811 static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, 3812 struct dwc2_hcd_urb *urb, u8 dev_addr, 3813 u8 ep_num, u8 ep_type, u8 ep_dir, 3814 u16 maxp, u16 maxp_mult) 3815 { 3816 if (dbg_perio() || 3817 ep_type == USB_ENDPOINT_XFER_BULK || 3818 ep_type == USB_ENDPOINT_XFER_CONTROL) 3819 dev_vdbg(hsotg->dev, 3820 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n", 3821 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult); 3822 urb->pipe_info.dev_addr = dev_addr; 3823 urb->pipe_info.ep_num = ep_num; 3824 urb->pipe_info.pipe_type = ep_type; 3825 urb->pipe_info.pipe_dir = ep_dir; 3826 urb->pipe_info.maxp = maxp; 3827 urb->pipe_info.maxp_mult = maxp_mult; 3828 } 3829 3830 /* 3831 * NOTE: This function will be removed once the peripheral controller code 3832 * is integrated and the driver is stable 3833 */ 3834 void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) 3835 { 3836 #ifdef DEBUG 3837 struct dwc2_host_chan *chan; 3838 struct dwc2_hcd_urb *urb; 3839 struct dwc2_qtd *qtd; 3840 int num_channels; 3841 u32 np_tx_status; 3842 u32 p_tx_status; 3843 int i; 3844 3845 num_channels = hsotg->params.host_channels; 3846 dev_dbg(hsotg->dev, "\n"); 3847 dev_dbg(hsotg->dev, 3848 "************************************************************\n"); 3849 dev_dbg(hsotg->dev, "HCD State:\n"); 3850 dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); 3851 3852 for (i = 0; i < num_channels; i++) { 3853 chan = hsotg->hc_ptr_array[i]; 3854 dev_dbg(hsotg->dev, " Channel %d:\n", i); 3855 dev_dbg(hsotg->dev, 3856 " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 3857 chan->dev_addr, chan->ep_num, chan->ep_is_in); 3858 dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); 3859 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 3860 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 3861 dev_dbg(hsotg->dev, " data_pid_start: %d\n", 3862 chan->data_pid_start); 3863 dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); 3864 dev_dbg(hsotg->dev, " xfer_started: %d\n", 3865 chan->xfer_started); 3866 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 3867 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 3868 (unsigned long)chan->xfer_dma); 3869 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 3870 dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); 3871 dev_dbg(hsotg->dev, " halt_on_queue: %d\n", 3872 chan->halt_on_queue); 3873 dev_dbg(hsotg->dev, " halt_pending: %d\n", 3874 chan->halt_pending); 3875 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 3876 dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); 3877 dev_dbg(hsotg->dev, " complete_split: %d\n", 3878 chan->complete_split); 3879 dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); 3880 dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); 3881 dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); 3882 dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); 3883 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 3884 3885 if (chan->xfer_started) { 3886 u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; 3887 3888 hfnum = dwc2_readl(hsotg, HFNUM); 3889 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 3890 hctsiz = dwc2_readl(hsotg, HCTSIZ(i)); 3891 hcint = dwc2_readl(hsotg, HCINT(i)); 3892 hcintmsk = dwc2_readl(hsotg, HCINTMSK(i)); 3893 dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); 3894 dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); 3895 dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); 3896 dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); 3897 dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); 3898 } 3899 3900 if (!(chan->xfer_started && chan->qh)) 3901 continue; 3902 3903 list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { 3904 if (!qtd->in_process) 3905 break; 3906 urb = qtd->urb; 3907 dev_dbg(hsotg->dev, " URB Info:\n"); 3908 dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", 3909 qtd, urb); 3910 if (urb) { 3911 dev_dbg(hsotg->dev, 3912 " Dev: %d, EP: %d %s\n", 3913 dwc2_hcd_get_dev_addr(&urb->pipe_info), 3914 dwc2_hcd_get_ep_num(&urb->pipe_info), 3915 dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 3916 "IN" : "OUT"); 3917 dev_dbg(hsotg->dev, 3918 " Max packet size: %d (%d mult)\n", 3919 dwc2_hcd_get_maxp(&urb->pipe_info), 3920 dwc2_hcd_get_maxp_mult(&urb->pipe_info)); 3921 dev_dbg(hsotg->dev, 3922 " transfer_buffer: %p\n", 3923 urb->buf); 3924 dev_dbg(hsotg->dev, 3925 " transfer_dma: %08lx\n", 3926 (unsigned long)urb->dma); 3927 dev_dbg(hsotg->dev, 3928 " transfer_buffer_length: %d\n", 3929 urb->length); 3930 dev_dbg(hsotg->dev, " actual_length: %d\n", 3931 urb->actual_length); 3932 } 3933 } 3934 } 3935 3936 dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", 3937 hsotg->non_periodic_channels); 3938 dev_dbg(hsotg->dev, " periodic_channels: %d\n", 3939 hsotg->periodic_channels); 3940 dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); 3941 np_tx_status = dwc2_readl(hsotg, GNPTXSTS); 3942 dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", 3943 (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3944 dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", 3945 (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3946 p_tx_status = dwc2_readl(hsotg, HPTXSTS); 3947 dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", 3948 (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3949 dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", 3950 (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3951 dwc2_dump_global_registers(hsotg); 3952 dwc2_dump_host_registers(hsotg); 3953 dev_dbg(hsotg->dev, 3954 "************************************************************\n"); 3955 dev_dbg(hsotg->dev, "\n"); 3956 #endif 3957 } 3958 3959 struct wrapper_priv_data { 3960 struct dwc2_hsotg *hsotg; 3961 }; 3962 3963 /* Gets the dwc2_hsotg from a usb_hcd */ 3964 static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) 3965 { 3966 struct wrapper_priv_data *p; 3967 3968 p = (struct wrapper_priv_data *)&hcd->hcd_priv; 3969 return p->hsotg; 3970 } 3971 3972 /** 3973 * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context 3974 * 3975 * This will get the dwc2_tt structure (and ttport) associated with the given 3976 * context (which is really just a struct urb pointer). 3977 * 3978 * The first time this is called for a given TT we allocate memory for our 3979 * structure. When everyone is done and has called dwc2_host_put_tt_info() 3980 * then the refcount for the structure will go to 0 and we'll free it. 3981 * 3982 * @hsotg: The HCD state structure for the DWC OTG controller. 3983 * @context: The priv pointer from a struct dwc2_hcd_urb. 3984 * @mem_flags: Flags for allocating memory. 3985 * @ttport: We'll return this device's port number here. That's used to 3986 * reference into the bitmap if we're on a multi_tt hub. 3987 * 3988 * Return: a pointer to a struct dwc2_tt. Don't forget to call 3989 * dwc2_host_put_tt_info()! Returns NULL upon memory alloc failure. 3990 */ 3991 3992 struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context, 3993 gfp_t mem_flags, int *ttport) 3994 { 3995 struct urb *urb = context; 3996 struct dwc2_tt *dwc_tt = NULL; 3997 3998 if (urb->dev->tt) { 3999 *ttport = urb->dev->ttport; 4000 4001 dwc_tt = urb->dev->tt->hcpriv; 4002 if (!dwc_tt) { 4003 size_t bitmap_size; 4004 4005 /* 4006 * For single_tt we need one schedule. For multi_tt 4007 * we need one per port. 4008 */ 4009 bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP * 4010 sizeof(dwc_tt->periodic_bitmaps[0]); 4011 if (urb->dev->tt->multi) 4012 bitmap_size *= urb->dev->tt->hub->maxchild; 4013 4014 dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size, 4015 mem_flags); 4016 if (!dwc_tt) 4017 return NULL; 4018 4019 dwc_tt->usb_tt = urb->dev->tt; 4020 dwc_tt->usb_tt->hcpriv = dwc_tt; 4021 } 4022 4023 dwc_tt->refcount++; 4024 } 4025 4026 return dwc_tt; 4027 } 4028 4029 /** 4030 * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info() 4031 * 4032 * Frees resources allocated by dwc2_host_get_tt_info() if all current holders 4033 * of the structure are done. 4034 * 4035 * It's OK to call this with NULL. 4036 * 4037 * @hsotg: The HCD state structure for the DWC OTG controller. 4038 * @dwc_tt: The pointer returned by dwc2_host_get_tt_info. 4039 */ 4040 void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt) 4041 { 4042 /* Model kfree and make put of NULL a no-op */ 4043 if (!dwc_tt) 4044 return; 4045 4046 WARN_ON(dwc_tt->refcount < 1); 4047 4048 dwc_tt->refcount--; 4049 if (!dwc_tt->refcount) { 4050 dwc_tt->usb_tt->hcpriv = NULL; 4051 kfree(dwc_tt); 4052 } 4053 } 4054 4055 int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) 4056 { 4057 struct urb *urb = context; 4058 4059 return urb->dev->speed; 4060 } 4061 4062 static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4063 struct urb *urb) 4064 { 4065 struct usb_bus *bus = hcd_to_bus(hcd); 4066 4067 if (urb->interval) 4068 bus->bandwidth_allocated += bw / urb->interval; 4069 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4070 bus->bandwidth_isoc_reqs++; 4071 else 4072 bus->bandwidth_int_reqs++; 4073 } 4074 4075 static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4076 struct urb *urb) 4077 { 4078 struct usb_bus *bus = hcd_to_bus(hcd); 4079 4080 if (urb->interval) 4081 bus->bandwidth_allocated -= bw / urb->interval; 4082 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4083 bus->bandwidth_isoc_reqs--; 4084 else 4085 bus->bandwidth_int_reqs--; 4086 } 4087 4088 /* 4089 * Sets the final status of an URB and returns it to the upper layer. Any 4090 * required cleanup of the URB is performed. 4091 * 4092 * Must be called with interrupt disabled and spinlock held 4093 */ 4094 void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, 4095 int status) 4096 { 4097 struct urb *urb; 4098 int i; 4099 4100 if (!qtd) { 4101 dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); 4102 return; 4103 } 4104 4105 if (!qtd->urb) { 4106 dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); 4107 return; 4108 } 4109 4110 urb = qtd->urb->priv; 4111 if (!urb) { 4112 dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); 4113 return; 4114 } 4115 4116 urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); 4117 4118 if (dbg_urb(urb)) 4119 dev_vdbg(hsotg->dev, 4120 "%s: urb %p device %d ep %d-%s status %d actual %d\n", 4121 __func__, urb, usb_pipedevice(urb->pipe), 4122 usb_pipeendpoint(urb->pipe), 4123 usb_pipein(urb->pipe) ? "IN" : "OUT", status, 4124 urb->actual_length); 4125 4126 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4127 urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); 4128 for (i = 0; i < urb->number_of_packets; ++i) { 4129 urb->iso_frame_desc[i].actual_length = 4130 dwc2_hcd_urb_get_iso_desc_actual_length( 4131 qtd->urb, i); 4132 urb->iso_frame_desc[i].status = 4133 dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); 4134 } 4135 } 4136 4137 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { 4138 for (i = 0; i < urb->number_of_packets; i++) 4139 dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", 4140 i, urb->iso_frame_desc[i].status); 4141 } 4142 4143 urb->status = status; 4144 if (!status) { 4145 if ((urb->transfer_flags & URB_SHORT_NOT_OK) && 4146 urb->actual_length < urb->transfer_buffer_length) 4147 urb->status = -EREMOTEIO; 4148 } 4149 4150 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4151 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4152 struct usb_host_endpoint *ep = urb->ep; 4153 4154 if (ep) 4155 dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), 4156 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4157 urb); 4158 } 4159 4160 usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); 4161 urb->hcpriv = NULL; 4162 kfree(qtd->urb); 4163 qtd->urb = NULL; 4164 4165 usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); 4166 } 4167 4168 /* 4169 * Work queue function for starting the HCD when A-Cable is connected 4170 */ 4171 static void dwc2_hcd_start_func(struct work_struct *work) 4172 { 4173 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4174 start_work.work); 4175 4176 dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); 4177 dwc2_host_start(hsotg); 4178 } 4179 4180 /* 4181 * Reset work queue function 4182 */ 4183 static void dwc2_hcd_reset_func(struct work_struct *work) 4184 { 4185 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4186 reset_work.work); 4187 unsigned long flags; 4188 u32 hprt0; 4189 4190 dev_dbg(hsotg->dev, "USB RESET function called\n"); 4191 4192 spin_lock_irqsave(&hsotg->lock, flags); 4193 4194 hprt0 = dwc2_read_hprt0(hsotg); 4195 hprt0 &= ~HPRT0_RST; 4196 dwc2_writel(hsotg, hprt0, HPRT0); 4197 hsotg->flags.b.port_reset_change = 1; 4198 4199 spin_unlock_irqrestore(&hsotg->lock, flags); 4200 } 4201 4202 static void dwc2_hcd_phy_reset_func(struct work_struct *work) 4203 { 4204 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4205 phy_reset_work); 4206 int ret; 4207 4208 ret = phy_reset(hsotg->phy); 4209 if (ret) 4210 dev_warn(hsotg->dev, "PHY reset failed\n"); 4211 } 4212 4213 /* 4214 * ========================================================================= 4215 * Linux HC Driver Functions 4216 * ========================================================================= 4217 */ 4218 4219 /* 4220 * Initializes the DWC_otg controller and its root hub and prepares it for host 4221 * mode operation. Activates the root port. Returns 0 on success and a negative 4222 * error code on failure. 4223 */ 4224 static int _dwc2_hcd_start(struct usb_hcd *hcd) 4225 { 4226 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4227 struct usb_bus *bus = hcd_to_bus(hcd); 4228 unsigned long flags; 4229 u32 hprt0; 4230 int ret; 4231 4232 dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); 4233 4234 spin_lock_irqsave(&hsotg->lock, flags); 4235 hsotg->lx_state = DWC2_L0; 4236 hcd->state = HC_STATE_RUNNING; 4237 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4238 4239 if (dwc2_is_device_mode(hsotg)) { 4240 spin_unlock_irqrestore(&hsotg->lock, flags); 4241 return 0; /* why 0 ?? */ 4242 } 4243 4244 dwc2_hcd_reinit(hsotg); 4245 4246 hprt0 = dwc2_read_hprt0(hsotg); 4247 /* Has vbus power been turned on in dwc2_core_host_init ? */ 4248 if (hprt0 & HPRT0_PWR) { 4249 /* Enable external vbus supply before resuming root hub */ 4250 spin_unlock_irqrestore(&hsotg->lock, flags); 4251 ret = dwc2_vbus_supply_init(hsotg); 4252 if (ret) 4253 return ret; 4254 spin_lock_irqsave(&hsotg->lock, flags); 4255 } 4256 4257 /* Initialize and connect root hub if one is not already attached */ 4258 if (bus->root_hub) { 4259 dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); 4260 /* Inform the HUB driver to resume */ 4261 usb_hcd_resume_root_hub(hcd); 4262 } 4263 4264 spin_unlock_irqrestore(&hsotg->lock, flags); 4265 4266 return 0; 4267 } 4268 4269 /* 4270 * Halts the DWC_otg host mode operations in a clean manner. USB transfers are 4271 * stopped. 4272 */ 4273 static void _dwc2_hcd_stop(struct usb_hcd *hcd) 4274 { 4275 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4276 unsigned long flags; 4277 u32 hprt0; 4278 4279 /* Turn off all host-specific interrupts */ 4280 dwc2_disable_host_interrupts(hsotg); 4281 4282 /* Wait for interrupt processing to finish */ 4283 synchronize_irq(hcd->irq); 4284 4285 spin_lock_irqsave(&hsotg->lock, flags); 4286 hprt0 = dwc2_read_hprt0(hsotg); 4287 /* Ensure hcd is disconnected */ 4288 dwc2_hcd_disconnect(hsotg, true); 4289 dwc2_hcd_stop(hsotg); 4290 hsotg->lx_state = DWC2_L3; 4291 hcd->state = HC_STATE_HALT; 4292 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4293 spin_unlock_irqrestore(&hsotg->lock, flags); 4294 4295 /* keep balanced supply init/exit by checking HPRT0_PWR */ 4296 if (hprt0 & HPRT0_PWR) 4297 dwc2_vbus_supply_exit(hsotg); 4298 4299 usleep_range(1000, 3000); 4300 } 4301 4302 static int _dwc2_hcd_suspend(struct usb_hcd *hcd) 4303 { 4304 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4305 unsigned long flags; 4306 int ret = 0; 4307 u32 hprt0; 4308 u32 pcgctl; 4309 4310 spin_lock_irqsave(&hsotg->lock, flags); 4311 4312 if (dwc2_is_device_mode(hsotg)) 4313 goto unlock; 4314 4315 if (hsotg->lx_state != DWC2_L0) 4316 goto unlock; 4317 4318 if (!HCD_HW_ACCESSIBLE(hcd)) 4319 goto unlock; 4320 4321 if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) 4322 goto unlock; 4323 4324 if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) 4325 goto skip_power_saving; 4326 4327 /* 4328 * Drive USB suspend and disable port Power 4329 * if usb bus is not suspended. 4330 */ 4331 if (!hsotg->bus_suspended) { 4332 hprt0 = dwc2_read_hprt0(hsotg); 4333 if (hprt0 & HPRT0_CONNSTS) { 4334 hprt0 |= HPRT0_SUSP; 4335 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) 4336 hprt0 &= ~HPRT0_PWR; 4337 dwc2_writel(hsotg, hprt0, HPRT0); 4338 } 4339 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4340 spin_unlock_irqrestore(&hsotg->lock, flags); 4341 dwc2_vbus_supply_exit(hsotg); 4342 spin_lock_irqsave(&hsotg->lock, flags); 4343 } else { 4344 pcgctl = readl(hsotg->regs + PCGCTL); 4345 pcgctl |= PCGCTL_STOPPCLK; 4346 writel(pcgctl, hsotg->regs + PCGCTL); 4347 } 4348 } 4349 4350 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4351 /* Enter partial_power_down */ 4352 ret = dwc2_enter_partial_power_down(hsotg); 4353 if (ret) { 4354 if (ret != -ENOTSUPP) 4355 dev_err(hsotg->dev, 4356 "enter partial_power_down failed\n"); 4357 goto skip_power_saving; 4358 } 4359 4360 /* After entering partial_power_down, hardware is no more accessible */ 4361 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4362 } 4363 4364 /* Ask phy to be suspended */ 4365 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4366 spin_unlock_irqrestore(&hsotg->lock, flags); 4367 usb_phy_set_suspend(hsotg->uphy, true); 4368 spin_lock_irqsave(&hsotg->lock, flags); 4369 } 4370 4371 skip_power_saving: 4372 hsotg->lx_state = DWC2_L2; 4373 unlock: 4374 spin_unlock_irqrestore(&hsotg->lock, flags); 4375 4376 return ret; 4377 } 4378 4379 static int _dwc2_hcd_resume(struct usb_hcd *hcd) 4380 { 4381 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4382 unsigned long flags; 4383 u32 pcgctl; 4384 int ret = 0; 4385 4386 spin_lock_irqsave(&hsotg->lock, flags); 4387 4388 if (dwc2_is_device_mode(hsotg)) 4389 goto unlock; 4390 4391 if (hsotg->lx_state != DWC2_L2) 4392 goto unlock; 4393 4394 if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) { 4395 hsotg->lx_state = DWC2_L0; 4396 goto unlock; 4397 } 4398 4399 /* 4400 * Enable power if not already done. 4401 * This must not be spinlocked since duration 4402 * of this call is unknown. 4403 */ 4404 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4405 spin_unlock_irqrestore(&hsotg->lock, flags); 4406 usb_phy_set_suspend(hsotg->uphy, false); 4407 spin_lock_irqsave(&hsotg->lock, flags); 4408 } 4409 4410 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4411 /* 4412 * Set HW accessible bit before powering on the controller 4413 * since an interrupt may rise. 4414 */ 4415 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4416 4417 4418 /* Exit partial_power_down */ 4419 ret = dwc2_exit_partial_power_down(hsotg, true); 4420 if (ret && (ret != -ENOTSUPP)) 4421 dev_err(hsotg->dev, "exit partial_power_down failed\n"); 4422 } else { 4423 pcgctl = readl(hsotg->regs + PCGCTL); 4424 pcgctl &= ~PCGCTL_STOPPCLK; 4425 writel(pcgctl, hsotg->regs + PCGCTL); 4426 } 4427 4428 hsotg->lx_state = DWC2_L0; 4429 4430 spin_unlock_irqrestore(&hsotg->lock, flags); 4431 4432 if (hsotg->bus_suspended) { 4433 spin_lock_irqsave(&hsotg->lock, flags); 4434 hsotg->flags.b.port_suspend_change = 1; 4435 spin_unlock_irqrestore(&hsotg->lock, flags); 4436 dwc2_port_resume(hsotg); 4437 } else { 4438 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) { 4439 dwc2_vbus_supply_init(hsotg); 4440 4441 /* Wait for controller to correctly update D+/D- level */ 4442 usleep_range(3000, 5000); 4443 } 4444 4445 /* 4446 * Clear Port Enable and Port Status changes. 4447 * Enable Port Power. 4448 */ 4449 dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET | 4450 HPRT0_ENACHG, HPRT0); 4451 /* Wait for controller to detect Port Connect */ 4452 usleep_range(5000, 7000); 4453 } 4454 4455 return ret; 4456 unlock: 4457 spin_unlock_irqrestore(&hsotg->lock, flags); 4458 4459 return ret; 4460 } 4461 4462 /* Returns the current frame number */ 4463 static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) 4464 { 4465 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4466 4467 return dwc2_hcd_get_frame_number(hsotg); 4468 } 4469 4470 static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, 4471 char *fn_name) 4472 { 4473 #ifdef VERBOSE_DEBUG 4474 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4475 char *pipetype = NULL; 4476 char *speed = NULL; 4477 4478 dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); 4479 dev_vdbg(hsotg->dev, " Device address: %d\n", 4480 usb_pipedevice(urb->pipe)); 4481 dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", 4482 usb_pipeendpoint(urb->pipe), 4483 usb_pipein(urb->pipe) ? "IN" : "OUT"); 4484 4485 switch (usb_pipetype(urb->pipe)) { 4486 case PIPE_CONTROL: 4487 pipetype = "CONTROL"; 4488 break; 4489 case PIPE_BULK: 4490 pipetype = "BULK"; 4491 break; 4492 case PIPE_INTERRUPT: 4493 pipetype = "INTERRUPT"; 4494 break; 4495 case PIPE_ISOCHRONOUS: 4496 pipetype = "ISOCHRONOUS"; 4497 break; 4498 } 4499 4500 dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, 4501 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? 4502 "IN" : "OUT"); 4503 4504 switch (urb->dev->speed) { 4505 case USB_SPEED_HIGH: 4506 speed = "HIGH"; 4507 break; 4508 case USB_SPEED_FULL: 4509 speed = "FULL"; 4510 break; 4511 case USB_SPEED_LOW: 4512 speed = "LOW"; 4513 break; 4514 default: 4515 speed = "UNKNOWN"; 4516 break; 4517 } 4518 4519 dev_vdbg(hsotg->dev, " Speed: %s\n", speed); 4520 dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n", 4521 usb_endpoint_maxp(&urb->ep->desc), 4522 usb_endpoint_maxp_mult(&urb->ep->desc)); 4523 4524 dev_vdbg(hsotg->dev, " Data buffer length: %d\n", 4525 urb->transfer_buffer_length); 4526 dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", 4527 urb->transfer_buffer, (unsigned long)urb->transfer_dma); 4528 dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", 4529 urb->setup_packet, (unsigned long)urb->setup_dma); 4530 dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); 4531 4532 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4533 int i; 4534 4535 for (i = 0; i < urb->number_of_packets; i++) { 4536 dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); 4537 dev_vdbg(hsotg->dev, " offset: %d, length %d\n", 4538 urb->iso_frame_desc[i].offset, 4539 urb->iso_frame_desc[i].length); 4540 } 4541 } 4542 #endif 4543 } 4544 4545 /* 4546 * Starts processing a USB transfer request specified by a USB Request Block 4547 * (URB). mem_flags indicates the type of memory allocation to use while 4548 * processing this URB. 4549 */ 4550 static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, 4551 gfp_t mem_flags) 4552 { 4553 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4554 struct usb_host_endpoint *ep = urb->ep; 4555 struct dwc2_hcd_urb *dwc2_urb; 4556 int i; 4557 int retval; 4558 int alloc_bandwidth = 0; 4559 u8 ep_type = 0; 4560 u32 tflags = 0; 4561 void *buf; 4562 unsigned long flags; 4563 struct dwc2_qh *qh; 4564 bool qh_allocated = false; 4565 struct dwc2_qtd *qtd; 4566 4567 if (dbg_urb(urb)) { 4568 dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); 4569 dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); 4570 } 4571 4572 if (!ep) 4573 return -EINVAL; 4574 4575 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4576 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4577 spin_lock_irqsave(&hsotg->lock, flags); 4578 if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) 4579 alloc_bandwidth = 1; 4580 spin_unlock_irqrestore(&hsotg->lock, flags); 4581 } 4582 4583 switch (usb_pipetype(urb->pipe)) { 4584 case PIPE_CONTROL: 4585 ep_type = USB_ENDPOINT_XFER_CONTROL; 4586 break; 4587 case PIPE_ISOCHRONOUS: 4588 ep_type = USB_ENDPOINT_XFER_ISOC; 4589 break; 4590 case PIPE_BULK: 4591 ep_type = USB_ENDPOINT_XFER_BULK; 4592 break; 4593 case PIPE_INTERRUPT: 4594 ep_type = USB_ENDPOINT_XFER_INT; 4595 break; 4596 } 4597 4598 dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, 4599 mem_flags); 4600 if (!dwc2_urb) 4601 return -ENOMEM; 4602 4603 dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), 4604 usb_pipeendpoint(urb->pipe), ep_type, 4605 usb_pipein(urb->pipe), 4606 usb_endpoint_maxp(&ep->desc), 4607 usb_endpoint_maxp_mult(&ep->desc)); 4608 4609 buf = urb->transfer_buffer; 4610 4611 if (hcd_uses_dma(hcd)) { 4612 if (!buf && (urb->transfer_dma & 3)) { 4613 dev_err(hsotg->dev, 4614 "%s: unaligned transfer with no transfer_buffer", 4615 __func__); 4616 retval = -EINVAL; 4617 goto fail0; 4618 } 4619 } 4620 4621 if (!(urb->transfer_flags & URB_NO_INTERRUPT)) 4622 tflags |= URB_GIVEBACK_ASAP; 4623 if (urb->transfer_flags & URB_ZERO_PACKET) 4624 tflags |= URB_SEND_ZERO_PACKET; 4625 4626 dwc2_urb->priv = urb; 4627 dwc2_urb->buf = buf; 4628 dwc2_urb->dma = urb->transfer_dma; 4629 dwc2_urb->length = urb->transfer_buffer_length; 4630 dwc2_urb->setup_packet = urb->setup_packet; 4631 dwc2_urb->setup_dma = urb->setup_dma; 4632 dwc2_urb->flags = tflags; 4633 dwc2_urb->interval = urb->interval; 4634 dwc2_urb->status = -EINPROGRESS; 4635 4636 for (i = 0; i < urb->number_of_packets; ++i) 4637 dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, 4638 urb->iso_frame_desc[i].offset, 4639 urb->iso_frame_desc[i].length); 4640 4641 urb->hcpriv = dwc2_urb; 4642 qh = (struct dwc2_qh *)ep->hcpriv; 4643 /* Create QH for the endpoint if it doesn't exist */ 4644 if (!qh) { 4645 qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags); 4646 if (!qh) { 4647 retval = -ENOMEM; 4648 goto fail0; 4649 } 4650 ep->hcpriv = qh; 4651 qh_allocated = true; 4652 } 4653 4654 qtd = kzalloc(sizeof(*qtd), mem_flags); 4655 if (!qtd) { 4656 retval = -ENOMEM; 4657 goto fail1; 4658 } 4659 4660 spin_lock_irqsave(&hsotg->lock, flags); 4661 retval = usb_hcd_link_urb_to_ep(hcd, urb); 4662 if (retval) 4663 goto fail2; 4664 4665 retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd); 4666 if (retval) 4667 goto fail3; 4668 4669 if (alloc_bandwidth) { 4670 dwc2_allocate_bus_bandwidth(hcd, 4671 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4672 urb); 4673 } 4674 4675 spin_unlock_irqrestore(&hsotg->lock, flags); 4676 4677 return 0; 4678 4679 fail3: 4680 dwc2_urb->priv = NULL; 4681 usb_hcd_unlink_urb_from_ep(hcd, urb); 4682 if (qh_allocated && qh->channel && qh->channel->qh == qh) 4683 qh->channel->qh = NULL; 4684 fail2: 4685 spin_unlock_irqrestore(&hsotg->lock, flags); 4686 urb->hcpriv = NULL; 4687 kfree(qtd); 4688 fail1: 4689 if (qh_allocated) { 4690 struct dwc2_qtd *qtd2, *qtd2_tmp; 4691 4692 ep->hcpriv = NULL; 4693 dwc2_hcd_qh_unlink(hsotg, qh); 4694 /* Free each QTD in the QH's QTD list */ 4695 list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list, 4696 qtd_list_entry) 4697 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh); 4698 dwc2_hcd_qh_free(hsotg, qh); 4699 } 4700 fail0: 4701 kfree(dwc2_urb); 4702 4703 return retval; 4704 } 4705 4706 /* 4707 * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. 4708 */ 4709 static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, 4710 int status) 4711 { 4712 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4713 int rc; 4714 unsigned long flags; 4715 4716 dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); 4717 dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); 4718 4719 spin_lock_irqsave(&hsotg->lock, flags); 4720 4721 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 4722 if (rc) 4723 goto out; 4724 4725 if (!urb->hcpriv) { 4726 dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); 4727 goto out; 4728 } 4729 4730 rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); 4731 4732 usb_hcd_unlink_urb_from_ep(hcd, urb); 4733 4734 kfree(urb->hcpriv); 4735 urb->hcpriv = NULL; 4736 4737 /* Higher layer software sets URB status */ 4738 spin_unlock(&hsotg->lock); 4739 usb_hcd_giveback_urb(hcd, urb, status); 4740 spin_lock(&hsotg->lock); 4741 4742 dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); 4743 dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); 4744 out: 4745 spin_unlock_irqrestore(&hsotg->lock, flags); 4746 4747 return rc; 4748 } 4749 4750 /* 4751 * Frees resources in the DWC_otg controller related to a given endpoint. Also 4752 * clears state in the HCD related to the endpoint. Any URBs for the endpoint 4753 * must already be dequeued. 4754 */ 4755 static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, 4756 struct usb_host_endpoint *ep) 4757 { 4758 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4759 4760 dev_dbg(hsotg->dev, 4761 "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", 4762 ep->desc.bEndpointAddress, ep->hcpriv); 4763 dwc2_hcd_endpoint_disable(hsotg, ep, 250); 4764 } 4765 4766 /* 4767 * Resets endpoint specific parameter values, in current version used to reset 4768 * the data toggle (as a WA). This function can be called from usb_clear_halt 4769 * routine. 4770 */ 4771 static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, 4772 struct usb_host_endpoint *ep) 4773 { 4774 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4775 unsigned long flags; 4776 4777 dev_dbg(hsotg->dev, 4778 "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", 4779 ep->desc.bEndpointAddress); 4780 4781 spin_lock_irqsave(&hsotg->lock, flags); 4782 dwc2_hcd_endpoint_reset(hsotg, ep); 4783 spin_unlock_irqrestore(&hsotg->lock, flags); 4784 } 4785 4786 /* 4787 * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if 4788 * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid 4789 * interrupt. 4790 * 4791 * This function is called by the USB core when an interrupt occurs 4792 */ 4793 static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) 4794 { 4795 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4796 4797 return dwc2_handle_hcd_intr(hsotg); 4798 } 4799 4800 /* 4801 * Creates Status Change bitmap for the root hub and root port. The bitmap is 4802 * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 4803 * is the status change indicator for the single root port. Returns 1 if either 4804 * change indicator is 1, otherwise returns 0. 4805 */ 4806 static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) 4807 { 4808 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4809 4810 buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; 4811 return buf[0] != 0; 4812 } 4813 4814 /* Handles hub class-specific requests */ 4815 static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, 4816 u16 windex, char *buf, u16 wlength) 4817 { 4818 int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, 4819 wvalue, windex, buf, wlength); 4820 return retval; 4821 } 4822 4823 /* Handles hub TT buffer clear completions */ 4824 static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, 4825 struct usb_host_endpoint *ep) 4826 { 4827 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4828 struct dwc2_qh *qh; 4829 unsigned long flags; 4830 4831 qh = ep->hcpriv; 4832 if (!qh) 4833 return; 4834 4835 spin_lock_irqsave(&hsotg->lock, flags); 4836 qh->tt_buffer_dirty = 0; 4837 4838 if (hsotg->flags.b.port_connect_status) 4839 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); 4840 4841 spin_unlock_irqrestore(&hsotg->lock, flags); 4842 } 4843 4844 /* 4845 * HPRT0_SPD_HIGH_SPEED: high speed 4846 * HPRT0_SPD_FULL_SPEED: full speed 4847 */ 4848 static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed) 4849 { 4850 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4851 4852 if (hsotg->params.speed == speed) 4853 return; 4854 4855 hsotg->params.speed = speed; 4856 queue_work(hsotg->wq_otg, &hsotg->wf_otg); 4857 } 4858 4859 static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev) 4860 { 4861 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4862 4863 if (!hsotg->params.change_speed_quirk) 4864 return; 4865 4866 /* 4867 * On removal, set speed to default high-speed. 4868 */ 4869 if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN && 4870 udev->parent->speed < USB_SPEED_HIGH) { 4871 dev_info(hsotg->dev, "Set speed to default high-speed\n"); 4872 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4873 } 4874 } 4875 4876 static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev) 4877 { 4878 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4879 4880 if (!hsotg->params.change_speed_quirk) 4881 return 0; 4882 4883 if (udev->speed == USB_SPEED_HIGH) { 4884 dev_info(hsotg->dev, "Set speed to high-speed\n"); 4885 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4886 } else if ((udev->speed == USB_SPEED_FULL || 4887 udev->speed == USB_SPEED_LOW)) { 4888 /* 4889 * Change speed setting to full-speed if there's 4890 * a full-speed or low-speed device plugged in. 4891 */ 4892 dev_info(hsotg->dev, "Set speed to full-speed\n"); 4893 dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED); 4894 } 4895 4896 return 0; 4897 } 4898 4899 static struct hc_driver dwc2_hc_driver = { 4900 .description = "dwc2_hsotg", 4901 .product_desc = "DWC OTG Controller", 4902 .hcd_priv_size = sizeof(struct wrapper_priv_data), 4903 4904 .irq = _dwc2_hcd_irq, 4905 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, 4906 4907 .start = _dwc2_hcd_start, 4908 .stop = _dwc2_hcd_stop, 4909 .urb_enqueue = _dwc2_hcd_urb_enqueue, 4910 .urb_dequeue = _dwc2_hcd_urb_dequeue, 4911 .endpoint_disable = _dwc2_hcd_endpoint_disable, 4912 .endpoint_reset = _dwc2_hcd_endpoint_reset, 4913 .get_frame_number = _dwc2_hcd_get_frame_number, 4914 4915 .hub_status_data = _dwc2_hcd_hub_status_data, 4916 .hub_control = _dwc2_hcd_hub_control, 4917 .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, 4918 4919 .bus_suspend = _dwc2_hcd_suspend, 4920 .bus_resume = _dwc2_hcd_resume, 4921 4922 .map_urb_for_dma = dwc2_map_urb_for_dma, 4923 .unmap_urb_for_dma = dwc2_unmap_urb_for_dma, 4924 }; 4925 4926 /* 4927 * Frees secondary storage associated with the dwc2_hsotg structure contained 4928 * in the struct usb_hcd field 4929 */ 4930 static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) 4931 { 4932 u32 ahbcfg; 4933 u32 dctl; 4934 int i; 4935 4936 dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); 4937 4938 /* Free memory for QH/QTD lists */ 4939 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); 4940 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting); 4941 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); 4942 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); 4943 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); 4944 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); 4945 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); 4946 4947 /* Free memory for the host channels */ 4948 for (i = 0; i < MAX_EPS_CHANNELS; i++) { 4949 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 4950 4951 if (chan) { 4952 dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", 4953 i, chan); 4954 hsotg->hc_ptr_array[i] = NULL; 4955 kfree(chan); 4956 } 4957 } 4958 4959 if (hsotg->params.host_dma) { 4960 if (hsotg->status_buf) { 4961 dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, 4962 hsotg->status_buf, 4963 hsotg->status_buf_dma); 4964 hsotg->status_buf = NULL; 4965 } 4966 } else { 4967 kfree(hsotg->status_buf); 4968 hsotg->status_buf = NULL; 4969 } 4970 4971 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 4972 4973 /* Disable all interrupts */ 4974 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; 4975 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 4976 dwc2_writel(hsotg, 0, GINTMSK); 4977 4978 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { 4979 dctl = dwc2_readl(hsotg, DCTL); 4980 dctl |= DCTL_SFTDISCON; 4981 dwc2_writel(hsotg, dctl, DCTL); 4982 } 4983 4984 if (hsotg->wq_otg) { 4985 if (!cancel_work_sync(&hsotg->wf_otg)) 4986 flush_workqueue(hsotg->wq_otg); 4987 destroy_workqueue(hsotg->wq_otg); 4988 } 4989 4990 cancel_work_sync(&hsotg->phy_reset_work); 4991 4992 del_timer(&hsotg->wkp_timer); 4993 } 4994 4995 static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) 4996 { 4997 /* Turn off all host-specific interrupts */ 4998 dwc2_disable_host_interrupts(hsotg); 4999 5000 dwc2_hcd_free(hsotg); 5001 } 5002 5003 /* 5004 * Initializes the HCD. This function allocates memory for and initializes the 5005 * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the 5006 * USB bus with the core and calls the hc_driver->start() function. It returns 5007 * a negative error on failure. 5008 */ 5009 int dwc2_hcd_init(struct dwc2_hsotg *hsotg) 5010 { 5011 struct platform_device *pdev = to_platform_device(hsotg->dev); 5012 struct resource *res; 5013 struct usb_hcd *hcd; 5014 struct dwc2_host_chan *channel; 5015 u32 hcfg; 5016 int i, num_channels; 5017 int retval; 5018 5019 if (usb_disabled()) 5020 return -ENODEV; 5021 5022 dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); 5023 5024 retval = -ENOMEM; 5025 5026 hcfg = dwc2_readl(hsotg, HCFG); 5027 dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); 5028 5029 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5030 hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE, 5031 sizeof(*hsotg->frame_num_array), 5032 GFP_KERNEL); 5033 if (!hsotg->frame_num_array) 5034 goto error1; 5035 hsotg->last_frame_num_array = 5036 kcalloc(FRAME_NUM_ARRAY_SIZE, 5037 sizeof(*hsotg->last_frame_num_array), GFP_KERNEL); 5038 if (!hsotg->last_frame_num_array) 5039 goto error1; 5040 #endif 5041 hsotg->last_frame_num = HFNUM_MAX_FRNUM; 5042 5043 /* Check if the bus driver or platform code has setup a dma_mask */ 5044 if (hsotg->params.host_dma && 5045 !hsotg->dev->dma_mask) { 5046 dev_warn(hsotg->dev, 5047 "dma_mask not set, disabling DMA\n"); 5048 hsotg->params.host_dma = false; 5049 hsotg->params.dma_desc_enable = false; 5050 } 5051 5052 /* Set device flags indicating whether the HCD supports DMA */ 5053 if (hsotg->params.host_dma) { 5054 if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5055 dev_warn(hsotg->dev, "can't set DMA mask\n"); 5056 if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5057 dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); 5058 } 5059 5060 if (hsotg->params.change_speed_quirk) { 5061 dwc2_hc_driver.free_dev = dwc2_free_dev; 5062 dwc2_hc_driver.reset_device = dwc2_reset_device; 5063 } 5064 5065 if (hsotg->params.host_dma) 5066 dwc2_hc_driver.flags |= HCD_DMA; 5067 5068 hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); 5069 if (!hcd) 5070 goto error1; 5071 5072 hcd->has_tt = 1; 5073 5074 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 5075 hcd->rsrc_start = res->start; 5076 hcd->rsrc_len = resource_size(res); 5077 5078 ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg; 5079 hsotg->priv = hcd; 5080 5081 /* 5082 * Disable the global interrupt until all the interrupt handlers are 5083 * installed 5084 */ 5085 dwc2_disable_global_interrupts(hsotg); 5086 5087 /* Initialize the DWC_otg core, and select the Phy type */ 5088 retval = dwc2_core_init(hsotg, true); 5089 if (retval) 5090 goto error2; 5091 5092 /* Create new workqueue and init work */ 5093 retval = -ENOMEM; 5094 hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0); 5095 if (!hsotg->wq_otg) { 5096 dev_err(hsotg->dev, "Failed to create workqueue\n"); 5097 goto error2; 5098 } 5099 INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); 5100 5101 timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0); 5102 5103 /* Initialize the non-periodic schedule */ 5104 INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); 5105 INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting); 5106 INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); 5107 5108 /* Initialize the periodic schedule */ 5109 INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); 5110 INIT_LIST_HEAD(&hsotg->periodic_sched_ready); 5111 INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); 5112 INIT_LIST_HEAD(&hsotg->periodic_sched_queued); 5113 5114 INIT_LIST_HEAD(&hsotg->split_order); 5115 5116 /* 5117 * Create a host channel descriptor for each host channel implemented 5118 * in the controller. Initialize the channel descriptor array. 5119 */ 5120 INIT_LIST_HEAD(&hsotg->free_hc_list); 5121 num_channels = hsotg->params.host_channels; 5122 memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); 5123 5124 for (i = 0; i < num_channels; i++) { 5125 channel = kzalloc(sizeof(*channel), GFP_KERNEL); 5126 if (!channel) 5127 goto error3; 5128 channel->hc_num = i; 5129 INIT_LIST_HEAD(&channel->split_order_list_entry); 5130 hsotg->hc_ptr_array[i] = channel; 5131 } 5132 5133 /* Initialize work */ 5134 INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); 5135 INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); 5136 INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func); 5137 5138 /* 5139 * Allocate space for storing data on status transactions. Normally no 5140 * data is sent, but this space acts as a bit bucket. This must be 5141 * done after usb_add_hcd since that function allocates the DMA buffer 5142 * pool. 5143 */ 5144 if (hsotg->params.host_dma) 5145 hsotg->status_buf = dma_alloc_coherent(hsotg->dev, 5146 DWC2_HCD_STATUS_BUF_SIZE, 5147 &hsotg->status_buf_dma, GFP_KERNEL); 5148 else 5149 hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, 5150 GFP_KERNEL); 5151 5152 if (!hsotg->status_buf) 5153 goto error3; 5154 5155 /* 5156 * Create kmem caches to handle descriptor buffers in descriptor 5157 * DMA mode. 5158 * Alignment must be set to 512 bytes. 5159 */ 5160 if (hsotg->params.dma_desc_enable || 5161 hsotg->params.dma_desc_fs_enable) { 5162 hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc", 5163 sizeof(struct dwc2_dma_desc) * 5164 MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA, 5165 NULL); 5166 if (!hsotg->desc_gen_cache) { 5167 dev_err(hsotg->dev, 5168 "unable to create dwc2 generic desc cache\n"); 5169 5170 /* 5171 * Disable descriptor dma mode since it will not be 5172 * usable. 5173 */ 5174 hsotg->params.dma_desc_enable = false; 5175 hsotg->params.dma_desc_fs_enable = false; 5176 } 5177 5178 hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc", 5179 sizeof(struct dwc2_dma_desc) * 5180 MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL); 5181 if (!hsotg->desc_hsisoc_cache) { 5182 dev_err(hsotg->dev, 5183 "unable to create dwc2 hs isoc desc cache\n"); 5184 5185 kmem_cache_destroy(hsotg->desc_gen_cache); 5186 5187 /* 5188 * Disable descriptor dma mode since it will not be 5189 * usable. 5190 */ 5191 hsotg->params.dma_desc_enable = false; 5192 hsotg->params.dma_desc_fs_enable = false; 5193 } 5194 } 5195 5196 if (hsotg->params.host_dma) { 5197 /* 5198 * Create kmem caches to handle non-aligned buffer 5199 * in Buffer DMA mode. 5200 */ 5201 hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", 5202 DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, 5203 SLAB_CACHE_DMA, NULL); 5204 if (!hsotg->unaligned_cache) 5205 dev_err(hsotg->dev, 5206 "unable to create dwc2 unaligned cache\n"); 5207 } 5208 5209 hsotg->otg_port = 1; 5210 hsotg->frame_list = NULL; 5211 hsotg->frame_list_dma = 0; 5212 hsotg->periodic_qh_count = 0; 5213 5214 /* Initiate lx_state to L3 disconnected state */ 5215 hsotg->lx_state = DWC2_L3; 5216 5217 hcd->self.otg_port = hsotg->otg_port; 5218 5219 /* Don't support SG list at this point */ 5220 hcd->self.sg_tablesize = 0; 5221 5222 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5223 otg_set_host(hsotg->uphy->otg, &hcd->self); 5224 5225 /* 5226 * Finish generic HCD initialization and start the HCD. This function 5227 * allocates the DMA buffer pool, registers the USB bus, requests the 5228 * IRQ line, and calls hcd_start method. 5229 */ 5230 retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED); 5231 if (retval < 0) 5232 goto error4; 5233 5234 device_wakeup_enable(hcd->self.controller); 5235 5236 dwc2_hcd_dump_state(hsotg); 5237 5238 dwc2_enable_global_interrupts(hsotg); 5239 5240 return 0; 5241 5242 error4: 5243 kmem_cache_destroy(hsotg->unaligned_cache); 5244 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5245 kmem_cache_destroy(hsotg->desc_gen_cache); 5246 error3: 5247 dwc2_hcd_release(hsotg); 5248 error2: 5249 usb_put_hcd(hcd); 5250 error1: 5251 5252 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5253 kfree(hsotg->last_frame_num_array); 5254 kfree(hsotg->frame_num_array); 5255 #endif 5256 5257 dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); 5258 return retval; 5259 } 5260 5261 /* 5262 * Removes the HCD. 5263 * Frees memory and resources associated with the HCD and deregisters the bus. 5264 */ 5265 void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) 5266 { 5267 struct usb_hcd *hcd; 5268 5269 dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); 5270 5271 hcd = dwc2_hsotg_to_hcd(hsotg); 5272 dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); 5273 5274 if (!hcd) { 5275 dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", 5276 __func__); 5277 return; 5278 } 5279 5280 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5281 otg_set_host(hsotg->uphy->otg, NULL); 5282 5283 usb_remove_hcd(hcd); 5284 hsotg->priv = NULL; 5285 5286 kmem_cache_destroy(hsotg->unaligned_cache); 5287 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5288 kmem_cache_destroy(hsotg->desc_gen_cache); 5289 5290 dwc2_hcd_release(hsotg); 5291 usb_put_hcd(hcd); 5292 5293 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5294 kfree(hsotg->last_frame_num_array); 5295 kfree(hsotg->frame_num_array); 5296 #endif 5297 } 5298 5299 /** 5300 * dwc2_backup_host_registers() - Backup controller host registers. 5301 * When suspending usb bus, registers needs to be backuped 5302 * if controller power is disabled once suspended. 5303 * 5304 * @hsotg: Programming view of the DWC_otg controller 5305 */ 5306 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) 5307 { 5308 struct dwc2_hregs_backup *hr; 5309 int i; 5310 5311 dev_dbg(hsotg->dev, "%s\n", __func__); 5312 5313 /* Backup Host regs */ 5314 hr = &hsotg->hr_backup; 5315 hr->hcfg = dwc2_readl(hsotg, HCFG); 5316 hr->haintmsk = dwc2_readl(hsotg, HAINTMSK); 5317 for (i = 0; i < hsotg->params.host_channels; ++i) 5318 hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i)); 5319 5320 hr->hprt0 = dwc2_read_hprt0(hsotg); 5321 hr->hfir = dwc2_readl(hsotg, HFIR); 5322 hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); 5323 hr->valid = true; 5324 5325 return 0; 5326 } 5327 5328 /** 5329 * dwc2_restore_host_registers() - Restore controller host registers. 5330 * When resuming usb bus, device registers needs to be restored 5331 * if controller power were disabled. 5332 * 5333 * @hsotg: Programming view of the DWC_otg controller 5334 */ 5335 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) 5336 { 5337 struct dwc2_hregs_backup *hr; 5338 int i; 5339 5340 dev_dbg(hsotg->dev, "%s\n", __func__); 5341 5342 /* Restore host regs */ 5343 hr = &hsotg->hr_backup; 5344 if (!hr->valid) { 5345 dev_err(hsotg->dev, "%s: no host registers to restore\n", 5346 __func__); 5347 return -EINVAL; 5348 } 5349 hr->valid = false; 5350 5351 dwc2_writel(hsotg, hr->hcfg, HCFG); 5352 dwc2_writel(hsotg, hr->haintmsk, HAINTMSK); 5353 5354 for (i = 0; i < hsotg->params.host_channels; ++i) 5355 dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i)); 5356 5357 dwc2_writel(hsotg, hr->hprt0, HPRT0); 5358 dwc2_writel(hsotg, hr->hfir, HFIR); 5359 dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ); 5360 hsotg->frame_number = 0; 5361 5362 return 0; 5363 } 5364 5365 /** 5366 * dwc2_host_enter_hibernation() - Put controller in Hibernation. 5367 * 5368 * @hsotg: Programming view of the DWC_otg controller 5369 */ 5370 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) 5371 { 5372 unsigned long flags; 5373 int ret = 0; 5374 u32 hprt0; 5375 u32 pcgcctl; 5376 u32 gusbcfg; 5377 u32 gpwrdn; 5378 5379 dev_dbg(hsotg->dev, "Preparing host for hibernation\n"); 5380 ret = dwc2_backup_global_registers(hsotg); 5381 if (ret) { 5382 dev_err(hsotg->dev, "%s: failed to backup global registers\n", 5383 __func__); 5384 return ret; 5385 } 5386 ret = dwc2_backup_host_registers(hsotg); 5387 if (ret) { 5388 dev_err(hsotg->dev, "%s: failed to backup host registers\n", 5389 __func__); 5390 return ret; 5391 } 5392 5393 /* Enter USB Suspend Mode */ 5394 hprt0 = dwc2_readl(hsotg, HPRT0); 5395 hprt0 |= HPRT0_SUSP; 5396 hprt0 &= ~HPRT0_ENA; 5397 dwc2_writel(hsotg, hprt0, HPRT0); 5398 5399 /* Wait for the HPRT0.PrtSusp register field to be set */ 5400 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) 5401 dev_warn(hsotg->dev, "Suspend wasn't generated\n"); 5402 5403 /* 5404 * We need to disable interrupts to prevent servicing of any IRQ 5405 * during going to hibernation 5406 */ 5407 spin_lock_irqsave(&hsotg->lock, flags); 5408 hsotg->lx_state = DWC2_L2; 5409 5410 gusbcfg = dwc2_readl(hsotg, GUSBCFG); 5411 if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) { 5412 /* ULPI interface */ 5413 /* Suspend the Phy Clock */ 5414 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5415 pcgcctl |= PCGCTL_STOPPCLK; 5416 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5417 udelay(10); 5418 5419 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5420 gpwrdn |= GPWRDN_PMUACTV; 5421 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5422 udelay(10); 5423 } else { 5424 /* UTMI+ Interface */ 5425 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5426 gpwrdn |= GPWRDN_PMUACTV; 5427 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5428 udelay(10); 5429 5430 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5431 pcgcctl |= PCGCTL_STOPPCLK; 5432 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5433 udelay(10); 5434 } 5435 5436 /* Enable interrupts from wake up logic */ 5437 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5438 gpwrdn |= GPWRDN_PMUINTSEL; 5439 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5440 udelay(10); 5441 5442 /* Unmask host mode interrupts in GPWRDN */ 5443 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5444 gpwrdn |= GPWRDN_DISCONN_DET_MSK; 5445 gpwrdn |= GPWRDN_LNSTSCHG_MSK; 5446 gpwrdn |= GPWRDN_STS_CHGINT_MSK; 5447 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5448 udelay(10); 5449 5450 /* Enable Power Down Clamp */ 5451 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5452 gpwrdn |= GPWRDN_PWRDNCLMP; 5453 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5454 udelay(10); 5455 5456 /* Switch off VDD */ 5457 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5458 gpwrdn |= GPWRDN_PWRDNSWTCH; 5459 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5460 5461 hsotg->hibernated = 1; 5462 hsotg->bus_suspended = 1; 5463 dev_dbg(hsotg->dev, "Host hibernation completed\n"); 5464 spin_unlock_irqrestore(&hsotg->lock, flags); 5465 return ret; 5466 } 5467 5468 /* 5469 * dwc2_host_exit_hibernation() 5470 * 5471 * @hsotg: Programming view of the DWC_otg controller 5472 * @rem_wakeup: indicates whether resume is initiated by Device or Host. 5473 * @param reset: indicates whether resume is initiated by Reset. 5474 * 5475 * Return: non-zero if failed to enter to hibernation. 5476 * 5477 * This function is for exiting from Host mode hibernation by 5478 * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. 5479 */ 5480 int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, 5481 int reset) 5482 { 5483 u32 gpwrdn; 5484 u32 hprt0; 5485 int ret = 0; 5486 struct dwc2_gregs_backup *gr; 5487 struct dwc2_hregs_backup *hr; 5488 5489 gr = &hsotg->gr_backup; 5490 hr = &hsotg->hr_backup; 5491 5492 dev_dbg(hsotg->dev, 5493 "%s: called with rem_wakeup = %d reset = %d\n", 5494 __func__, rem_wakeup, reset); 5495 5496 dwc2_hib_restore_common(hsotg, rem_wakeup, 1); 5497 hsotg->hibernated = 0; 5498 5499 /* 5500 * This step is not described in functional spec but if not wait for 5501 * this delay, mismatch interrupts occurred because just after restore 5502 * core is in Device mode(gintsts.curmode == 0) 5503 */ 5504 mdelay(100); 5505 5506 /* Clear all pending interupts */ 5507 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5508 5509 /* De-assert Restore */ 5510 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5511 gpwrdn &= ~GPWRDN_RESTORE; 5512 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5513 udelay(10); 5514 5515 /* Restore GUSBCFG, HCFG */ 5516 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); 5517 dwc2_writel(hsotg, hr->hcfg, HCFG); 5518 5519 /* De-assert Wakeup Logic */ 5520 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5521 gpwrdn &= ~GPWRDN_PMUACTV; 5522 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5523 udelay(10); 5524 5525 hprt0 = hr->hprt0; 5526 hprt0 |= HPRT0_PWR; 5527 hprt0 &= ~HPRT0_ENA; 5528 hprt0 &= ~HPRT0_SUSP; 5529 dwc2_writel(hsotg, hprt0, HPRT0); 5530 5531 hprt0 = hr->hprt0; 5532 hprt0 |= HPRT0_PWR; 5533 hprt0 &= ~HPRT0_ENA; 5534 hprt0 &= ~HPRT0_SUSP; 5535 5536 if (reset) { 5537 hprt0 |= HPRT0_RST; 5538 dwc2_writel(hsotg, hprt0, HPRT0); 5539 5540 /* Wait for Resume time and then program HPRT again */ 5541 mdelay(60); 5542 hprt0 &= ~HPRT0_RST; 5543 dwc2_writel(hsotg, hprt0, HPRT0); 5544 } else { 5545 hprt0 |= HPRT0_RES; 5546 dwc2_writel(hsotg, hprt0, HPRT0); 5547 5548 /* Wait for Resume time and then program HPRT again */ 5549 mdelay(100); 5550 hprt0 &= ~HPRT0_RES; 5551 dwc2_writel(hsotg, hprt0, HPRT0); 5552 } 5553 /* Clear all interrupt status */ 5554 hprt0 = dwc2_readl(hsotg, HPRT0); 5555 hprt0 |= HPRT0_CONNDET; 5556 hprt0 |= HPRT0_ENACHG; 5557 hprt0 &= ~HPRT0_ENA; 5558 dwc2_writel(hsotg, hprt0, HPRT0); 5559 5560 hprt0 = dwc2_readl(hsotg, HPRT0); 5561 5562 /* Clear all pending interupts */ 5563 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5564 5565 /* Restore global registers */ 5566 ret = dwc2_restore_global_registers(hsotg); 5567 if (ret) { 5568 dev_err(hsotg->dev, "%s: failed to restore registers\n", 5569 __func__); 5570 return ret; 5571 } 5572 5573 /* Restore host registers */ 5574 ret = dwc2_restore_host_registers(hsotg); 5575 if (ret) { 5576 dev_err(hsotg->dev, "%s: failed to restore host registers\n", 5577 __func__); 5578 return ret; 5579 } 5580 5581 dwc2_hcd_rem_wakeup(hsotg); 5582 5583 hsotg->hibernated = 0; 5584 hsotg->bus_suspended = 0; 5585 hsotg->lx_state = DWC2_L0; 5586 dev_dbg(hsotg->dev, "Host hibernation restore complete\n"); 5587 return ret; 5588 } 5589 5590 bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) 5591 { 5592 struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub; 5593 5594 /* If the controller isn't allowed to wakeup then we can power off. */ 5595 if (!device_may_wakeup(dwc2->dev)) 5596 return true; 5597 5598 /* 5599 * We don't want to power off the PHY if something under the 5600 * root hub has wakeup enabled. 5601 */ 5602 if (usb_wakeup_enabled_descendants(root_hub)) 5603 return false; 5604 5605 /* No reason to keep the PHY powered, so allow poweroff */ 5606 return true; 5607 } 5608