1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * hcd.c - DesignWare HS OTG Controller host-mode routines 4 * 5 * Copyright (C) 2004-2013 Synopsys, Inc. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The names of the above-listed copyright holders may not be used 17 * to endorse or promote products derived from this software without 18 * specific prior written permission. 19 * 20 * ALTERNATIVELY, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") as published by the Free Software 22 * Foundation; either version 2 of the License, or (at your option) any 23 * later version. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * This file contains the core HCD code, and implements the Linux hc_driver 40 * API 41 */ 42 #include <linux/kernel.h> 43 #include <linux/module.h> 44 #include <linux/spinlock.h> 45 #include <linux/interrupt.h> 46 #include <linux/platform_device.h> 47 #include <linux/dma-mapping.h> 48 #include <linux/delay.h> 49 #include <linux/io.h> 50 #include <linux/slab.h> 51 #include <linux/usb.h> 52 53 #include <linux/usb/hcd.h> 54 #include <linux/usb/ch11.h> 55 56 #include "core.h" 57 #include "hcd.h" 58 59 /* 60 * ========================================================================= 61 * Host Core Layer Functions 62 * ========================================================================= 63 */ 64 65 /** 66 * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, 67 * used in both device and host modes 68 * 69 * @hsotg: Programming view of the DWC_otg controller 70 */ 71 static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) 72 { 73 u32 intmsk; 74 75 /* Clear any pending OTG Interrupts */ 76 dwc2_writel(hsotg, 0xffffffff, GOTGINT); 77 78 /* Clear any pending interrupts */ 79 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 80 81 /* Enable the interrupts in the GINTMSK */ 82 intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; 83 84 if (!hsotg->params.host_dma) 85 intmsk |= GINTSTS_RXFLVL; 86 if (!hsotg->params.external_id_pin_ctl) 87 intmsk |= GINTSTS_CONIDSTSCHNG; 88 89 intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP | 90 GINTSTS_SESSREQINT; 91 92 if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm) 93 intmsk |= GINTSTS_LPMTRANRCVD; 94 95 dwc2_writel(hsotg, intmsk, GINTMSK); 96 } 97 98 static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) 99 { 100 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 101 102 switch (hsotg->hw_params.arch) { 103 case GHWCFG2_EXT_DMA_ARCH: 104 dev_err(hsotg->dev, "External DMA Mode not supported\n"); 105 return -EINVAL; 106 107 case GHWCFG2_INT_DMA_ARCH: 108 dev_dbg(hsotg->dev, "Internal DMA Mode\n"); 109 if (hsotg->params.ahbcfg != -1) { 110 ahbcfg &= GAHBCFG_CTRL_MASK; 111 ahbcfg |= hsotg->params.ahbcfg & 112 ~GAHBCFG_CTRL_MASK; 113 } 114 break; 115 116 case GHWCFG2_SLAVE_ONLY_ARCH: 117 default: 118 dev_dbg(hsotg->dev, "Slave Only Mode\n"); 119 break; 120 } 121 122 if (hsotg->params.host_dma) 123 ahbcfg |= GAHBCFG_DMA_EN; 124 else 125 hsotg->params.dma_desc_enable = false; 126 127 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 128 129 return 0; 130 } 131 132 static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) 133 { 134 u32 usbcfg; 135 136 usbcfg = dwc2_readl(hsotg, GUSBCFG); 137 usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); 138 139 switch (hsotg->hw_params.op_mode) { 140 case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: 141 if (hsotg->params.otg_cap == 142 DWC2_CAP_PARAM_HNP_SRP_CAPABLE) 143 usbcfg |= GUSBCFG_HNPCAP; 144 if (hsotg->params.otg_cap != 145 DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) 146 usbcfg |= GUSBCFG_SRPCAP; 147 break; 148 149 case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: 150 case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: 151 case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: 152 if (hsotg->params.otg_cap != 153 DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) 154 usbcfg |= GUSBCFG_SRPCAP; 155 break; 156 157 case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: 158 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: 159 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: 160 default: 161 break; 162 } 163 164 dwc2_writel(hsotg, usbcfg, GUSBCFG); 165 } 166 167 static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg) 168 { 169 if (hsotg->vbus_supply) 170 return regulator_enable(hsotg->vbus_supply); 171 172 return 0; 173 } 174 175 static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg) 176 { 177 if (hsotg->vbus_supply) 178 return regulator_disable(hsotg->vbus_supply); 179 180 return 0; 181 } 182 183 /** 184 * dwc2_enable_host_interrupts() - Enables the Host mode interrupts 185 * 186 * @hsotg: Programming view of DWC_otg controller 187 */ 188 static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) 189 { 190 u32 intmsk; 191 192 dev_dbg(hsotg->dev, "%s()\n", __func__); 193 194 /* Disable all interrupts */ 195 dwc2_writel(hsotg, 0, GINTMSK); 196 dwc2_writel(hsotg, 0, HAINTMSK); 197 198 /* Enable the common interrupts */ 199 dwc2_enable_common_interrupts(hsotg); 200 201 /* Enable host mode interrupts without disturbing common interrupts */ 202 intmsk = dwc2_readl(hsotg, GINTMSK); 203 intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; 204 dwc2_writel(hsotg, intmsk, GINTMSK); 205 } 206 207 /** 208 * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts 209 * 210 * @hsotg: Programming view of DWC_otg controller 211 */ 212 static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) 213 { 214 u32 intmsk = dwc2_readl(hsotg, GINTMSK); 215 216 /* Disable host mode interrupts without disturbing common interrupts */ 217 intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | 218 GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT); 219 dwc2_writel(hsotg, intmsk, GINTMSK); 220 } 221 222 /* 223 * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size 224 * For system that have a total fifo depth that is smaller than the default 225 * RX + TX fifo size. 226 * 227 * @hsotg: Programming view of DWC_otg controller 228 */ 229 static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) 230 { 231 struct dwc2_core_params *params = &hsotg->params; 232 struct dwc2_hw_params *hw = &hsotg->hw_params; 233 u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; 234 235 total_fifo_size = hw->total_fifo_size; 236 rxfsiz = params->host_rx_fifo_size; 237 nptxfsiz = params->host_nperio_tx_fifo_size; 238 ptxfsiz = params->host_perio_tx_fifo_size; 239 240 /* 241 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth 242 * allocation with support for high bandwidth endpoints. Synopsys 243 * defines MPS(Max Packet size) for a periodic EP=1024, and for 244 * non-periodic as 512. 245 */ 246 if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { 247 /* 248 * For Buffer DMA mode/Scatter Gather DMA mode 249 * 2 * ((Largest Packet size / 4) + 1 + 1) + n 250 * with n = number of host channel. 251 * 2 * ((1024/4) + 2) = 516 252 */ 253 rxfsiz = 516 + hw->host_channels; 254 255 /* 256 * min non-periodic tx fifo depth 257 * 2 * (largest non-periodic USB packet used / 4) 258 * 2 * (512/4) = 256 259 */ 260 nptxfsiz = 256; 261 262 /* 263 * min periodic tx fifo depth 264 * (largest packet size*MC)/4 265 * (1024 * 3)/4 = 768 266 */ 267 ptxfsiz = 768; 268 269 params->host_rx_fifo_size = rxfsiz; 270 params->host_nperio_tx_fifo_size = nptxfsiz; 271 params->host_perio_tx_fifo_size = ptxfsiz; 272 } 273 274 /* 275 * If the summation of RX, NPTX and PTX fifo sizes is still 276 * bigger than the total_fifo_size, then we have a problem. 277 * 278 * We won't be able to allocate as many endpoints. Right now, 279 * we're just printing an error message, but ideally this FIFO 280 * allocation algorithm would be improved in the future. 281 * 282 * FIXME improve this FIFO allocation algorithm. 283 */ 284 if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) 285 dev_err(hsotg->dev, "invalid fifo sizes\n"); 286 } 287 288 static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) 289 { 290 struct dwc2_core_params *params = &hsotg->params; 291 u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz; 292 293 if (!params->enable_dynamic_fifo) 294 return; 295 296 dwc2_calculate_dynamic_fifo(hsotg); 297 298 /* Rx FIFO */ 299 grxfsiz = dwc2_readl(hsotg, GRXFSIZ); 300 dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); 301 grxfsiz &= ~GRXFSIZ_DEPTH_MASK; 302 grxfsiz |= params->host_rx_fifo_size << 303 GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; 304 dwc2_writel(hsotg, grxfsiz, GRXFSIZ); 305 dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", 306 dwc2_readl(hsotg, GRXFSIZ)); 307 308 /* Non-periodic Tx FIFO */ 309 dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", 310 dwc2_readl(hsotg, GNPTXFSIZ)); 311 nptxfsiz = params->host_nperio_tx_fifo_size << 312 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 313 nptxfsiz |= params->host_rx_fifo_size << 314 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 315 dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ); 316 dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", 317 dwc2_readl(hsotg, GNPTXFSIZ)); 318 319 /* Periodic Tx FIFO */ 320 dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", 321 dwc2_readl(hsotg, HPTXFSIZ)); 322 hptxfsiz = params->host_perio_tx_fifo_size << 323 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 324 hptxfsiz |= (params->host_rx_fifo_size + 325 params->host_nperio_tx_fifo_size) << 326 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 327 dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ); 328 dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", 329 dwc2_readl(hsotg, HPTXFSIZ)); 330 331 if (hsotg->params.en_multiple_tx_fifo && 332 hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) { 333 /* 334 * This feature was implemented in 2.91a version 335 * Global DFIFOCFG calculation for Host mode - 336 * include RxFIFO, NPTXFIFO and HPTXFIFO 337 */ 338 dfifocfg = dwc2_readl(hsotg, GDFIFOCFG); 339 dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; 340 dfifocfg |= (params->host_rx_fifo_size + 341 params->host_nperio_tx_fifo_size + 342 params->host_perio_tx_fifo_size) << 343 GDFIFOCFG_EPINFOBASE_SHIFT & 344 GDFIFOCFG_EPINFOBASE_MASK; 345 dwc2_writel(hsotg, dfifocfg, GDFIFOCFG); 346 } 347 } 348 349 /** 350 * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for 351 * the HFIR register according to PHY type and speed 352 * 353 * @hsotg: Programming view of DWC_otg controller 354 * 355 * NOTE: The caller can modify the value of the HFIR register only after the 356 * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) 357 * has been set 358 */ 359 u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) 360 { 361 u32 usbcfg; 362 u32 hprt0; 363 int clock = 60; /* default value */ 364 365 usbcfg = dwc2_readl(hsotg, GUSBCFG); 366 hprt0 = dwc2_readl(hsotg, HPRT0); 367 368 if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && 369 !(usbcfg & GUSBCFG_PHYIF16)) 370 clock = 60; 371 if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type == 372 GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) 373 clock = 48; 374 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 375 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 376 clock = 30; 377 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 378 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) 379 clock = 60; 380 if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 381 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 382 clock = 48; 383 if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && 384 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) 385 clock = 48; 386 if ((usbcfg & GUSBCFG_PHYSEL) && 387 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) 388 clock = 48; 389 390 if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED) 391 /* High speed case */ 392 return 125 * clock - 1; 393 394 /* FS/LS case */ 395 return 1000 * clock - 1; 396 } 397 398 /** 399 * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination 400 * buffer 401 * 402 * @hsotg: Programming view of DWC_otg controller 403 * @dest: Destination buffer for the packet 404 * @bytes: Number of bytes to copy to the destination 405 */ 406 void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) 407 { 408 u32 *data_buf = (u32 *)dest; 409 int word_count = (bytes + 3) / 4; 410 int i; 411 412 /* 413 * Todo: Account for the case where dest is not dword aligned. This 414 * requires reading data from the FIFO into a u32 temp buffer, then 415 * moving it into the data buffer. 416 */ 417 418 dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); 419 420 for (i = 0; i < word_count; i++, data_buf++) 421 *data_buf = dwc2_readl(hsotg, HCFIFO(0)); 422 } 423 424 /** 425 * dwc2_dump_channel_info() - Prints the state of a host channel 426 * 427 * @hsotg: Programming view of DWC_otg controller 428 * @chan: Pointer to the channel to dump 429 * 430 * Must be called with interrupt disabled and spinlock held 431 * 432 * NOTE: This function will be removed once the peripheral controller code 433 * is integrated and the driver is stable 434 */ 435 static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, 436 struct dwc2_host_chan *chan) 437 { 438 #ifdef VERBOSE_DEBUG 439 int num_channels = hsotg->params.host_channels; 440 struct dwc2_qh *qh; 441 u32 hcchar; 442 u32 hcsplt; 443 u32 hctsiz; 444 u32 hc_dma; 445 int i; 446 447 if (!chan) 448 return; 449 450 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 451 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 452 hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num)); 453 hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num)); 454 455 dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); 456 dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", 457 hcchar, hcsplt); 458 dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", 459 hctsiz, hc_dma); 460 dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 461 chan->dev_addr, chan->ep_num, chan->ep_is_in); 462 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 463 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 464 dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); 465 dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); 466 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 467 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 468 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 469 (unsigned long)chan->xfer_dma); 470 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 471 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 472 dev_dbg(hsotg->dev, " NP inactive sched:\n"); 473 list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, 474 qh_list_entry) 475 dev_dbg(hsotg->dev, " %p\n", qh); 476 dev_dbg(hsotg->dev, " NP waiting sched:\n"); 477 list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting, 478 qh_list_entry) 479 dev_dbg(hsotg->dev, " %p\n", qh); 480 dev_dbg(hsotg->dev, " NP active sched:\n"); 481 list_for_each_entry(qh, &hsotg->non_periodic_sched_active, 482 qh_list_entry) 483 dev_dbg(hsotg->dev, " %p\n", qh); 484 dev_dbg(hsotg->dev, " Channels:\n"); 485 for (i = 0; i < num_channels; i++) { 486 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 487 488 dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); 489 } 490 #endif /* VERBOSE_DEBUG */ 491 } 492 493 static int _dwc2_hcd_start(struct usb_hcd *hcd); 494 495 static void dwc2_host_start(struct dwc2_hsotg *hsotg) 496 { 497 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 498 499 hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); 500 _dwc2_hcd_start(hcd); 501 } 502 503 static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) 504 { 505 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 506 507 hcd->self.is_b_host = 0; 508 } 509 510 static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, 511 int *hub_addr, int *hub_port) 512 { 513 struct urb *urb = context; 514 515 if (urb->dev->tt) 516 *hub_addr = urb->dev->tt->hub->devnum; 517 else 518 *hub_addr = 0; 519 *hub_port = urb->dev->ttport; 520 } 521 522 /* 523 * ========================================================================= 524 * Low Level Host Channel Access Functions 525 * ========================================================================= 526 */ 527 528 static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, 529 struct dwc2_host_chan *chan) 530 { 531 u32 hcintmsk = HCINTMSK_CHHLTD; 532 533 switch (chan->ep_type) { 534 case USB_ENDPOINT_XFER_CONTROL: 535 case USB_ENDPOINT_XFER_BULK: 536 dev_vdbg(hsotg->dev, "control/bulk\n"); 537 hcintmsk |= HCINTMSK_XFERCOMPL; 538 hcintmsk |= HCINTMSK_STALL; 539 hcintmsk |= HCINTMSK_XACTERR; 540 hcintmsk |= HCINTMSK_DATATGLERR; 541 if (chan->ep_is_in) { 542 hcintmsk |= HCINTMSK_BBLERR; 543 } else { 544 hcintmsk |= HCINTMSK_NAK; 545 hcintmsk |= HCINTMSK_NYET; 546 if (chan->do_ping) 547 hcintmsk |= HCINTMSK_ACK; 548 } 549 550 if (chan->do_split) { 551 hcintmsk |= HCINTMSK_NAK; 552 if (chan->complete_split) 553 hcintmsk |= HCINTMSK_NYET; 554 else 555 hcintmsk |= HCINTMSK_ACK; 556 } 557 558 if (chan->error_state) 559 hcintmsk |= HCINTMSK_ACK; 560 break; 561 562 case USB_ENDPOINT_XFER_INT: 563 if (dbg_perio()) 564 dev_vdbg(hsotg->dev, "intr\n"); 565 hcintmsk |= HCINTMSK_XFERCOMPL; 566 hcintmsk |= HCINTMSK_NAK; 567 hcintmsk |= HCINTMSK_STALL; 568 hcintmsk |= HCINTMSK_XACTERR; 569 hcintmsk |= HCINTMSK_DATATGLERR; 570 hcintmsk |= HCINTMSK_FRMOVRUN; 571 572 if (chan->ep_is_in) 573 hcintmsk |= HCINTMSK_BBLERR; 574 if (chan->error_state) 575 hcintmsk |= HCINTMSK_ACK; 576 if (chan->do_split) { 577 if (chan->complete_split) 578 hcintmsk |= HCINTMSK_NYET; 579 else 580 hcintmsk |= HCINTMSK_ACK; 581 } 582 break; 583 584 case USB_ENDPOINT_XFER_ISOC: 585 if (dbg_perio()) 586 dev_vdbg(hsotg->dev, "isoc\n"); 587 hcintmsk |= HCINTMSK_XFERCOMPL; 588 hcintmsk |= HCINTMSK_FRMOVRUN; 589 hcintmsk |= HCINTMSK_ACK; 590 591 if (chan->ep_is_in) { 592 hcintmsk |= HCINTMSK_XACTERR; 593 hcintmsk |= HCINTMSK_BBLERR; 594 } 595 break; 596 default: 597 dev_err(hsotg->dev, "## Unknown EP type ##\n"); 598 break; 599 } 600 601 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 602 if (dbg_hc(chan)) 603 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 604 } 605 606 static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, 607 struct dwc2_host_chan *chan) 608 { 609 u32 hcintmsk = HCINTMSK_CHHLTD; 610 611 /* 612 * For Descriptor DMA mode core halts the channel on AHB error. 613 * Interrupt is not required. 614 */ 615 if (!hsotg->params.dma_desc_enable) { 616 if (dbg_hc(chan)) 617 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 618 hcintmsk |= HCINTMSK_AHBERR; 619 } else { 620 if (dbg_hc(chan)) 621 dev_vdbg(hsotg->dev, "desc DMA enabled\n"); 622 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 623 hcintmsk |= HCINTMSK_XFERCOMPL; 624 } 625 626 if (chan->error_state && !chan->do_split && 627 chan->ep_type != USB_ENDPOINT_XFER_ISOC) { 628 if (dbg_hc(chan)) 629 dev_vdbg(hsotg->dev, "setting ACK\n"); 630 hcintmsk |= HCINTMSK_ACK; 631 if (chan->ep_is_in) { 632 hcintmsk |= HCINTMSK_DATATGLERR; 633 if (chan->ep_type != USB_ENDPOINT_XFER_INT) 634 hcintmsk |= HCINTMSK_NAK; 635 } 636 } 637 638 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 639 if (dbg_hc(chan)) 640 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 641 } 642 643 static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, 644 struct dwc2_host_chan *chan) 645 { 646 u32 intmsk; 647 648 if (hsotg->params.host_dma) { 649 if (dbg_hc(chan)) 650 dev_vdbg(hsotg->dev, "DMA enabled\n"); 651 dwc2_hc_enable_dma_ints(hsotg, chan); 652 } else { 653 if (dbg_hc(chan)) 654 dev_vdbg(hsotg->dev, "DMA disabled\n"); 655 dwc2_hc_enable_slave_ints(hsotg, chan); 656 } 657 658 /* Enable the top level host channel interrupt */ 659 intmsk = dwc2_readl(hsotg, HAINTMSK); 660 intmsk |= 1 << chan->hc_num; 661 dwc2_writel(hsotg, intmsk, HAINTMSK); 662 if (dbg_hc(chan)) 663 dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); 664 665 /* Make sure host channel interrupts are enabled */ 666 intmsk = dwc2_readl(hsotg, GINTMSK); 667 intmsk |= GINTSTS_HCHINT; 668 dwc2_writel(hsotg, intmsk, GINTMSK); 669 if (dbg_hc(chan)) 670 dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); 671 } 672 673 /** 674 * dwc2_hc_init() - Prepares a host channel for transferring packets to/from 675 * a specific endpoint 676 * 677 * @hsotg: Programming view of DWC_otg controller 678 * @chan: Information needed to initialize the host channel 679 * 680 * The HCCHARn register is set up with the characteristics specified in chan. 681 * Host channel interrupts that may need to be serviced while this transfer is 682 * in progress are enabled. 683 */ 684 static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 685 { 686 u8 hc_num = chan->hc_num; 687 u32 hcintmsk; 688 u32 hcchar; 689 u32 hcsplt = 0; 690 691 if (dbg_hc(chan)) 692 dev_vdbg(hsotg->dev, "%s()\n", __func__); 693 694 /* Clear old interrupt conditions for this host channel */ 695 hcintmsk = 0xffffffff; 696 hcintmsk &= ~HCINTMSK_RESERVED14_31; 697 dwc2_writel(hsotg, hcintmsk, HCINT(hc_num)); 698 699 /* Enable channel interrupts required for this transfer */ 700 dwc2_hc_enable_ints(hsotg, chan); 701 702 /* 703 * Program the HCCHARn register with the endpoint characteristics for 704 * the current transfer 705 */ 706 hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; 707 hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; 708 if (chan->ep_is_in) 709 hcchar |= HCCHAR_EPDIR; 710 if (chan->speed == USB_SPEED_LOW) 711 hcchar |= HCCHAR_LSPDDEV; 712 hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; 713 hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; 714 dwc2_writel(hsotg, hcchar, HCCHAR(hc_num)); 715 if (dbg_hc(chan)) { 716 dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", 717 hc_num, hcchar); 718 719 dev_vdbg(hsotg->dev, "%s: Channel %d\n", 720 __func__, hc_num); 721 dev_vdbg(hsotg->dev, " Dev Addr: %d\n", 722 chan->dev_addr); 723 dev_vdbg(hsotg->dev, " Ep Num: %d\n", 724 chan->ep_num); 725 dev_vdbg(hsotg->dev, " Is In: %d\n", 726 chan->ep_is_in); 727 dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", 728 chan->speed == USB_SPEED_LOW); 729 dev_vdbg(hsotg->dev, " Ep Type: %d\n", 730 chan->ep_type); 731 dev_vdbg(hsotg->dev, " Max Pkt: %d\n", 732 chan->max_packet); 733 } 734 735 /* Program the HCSPLT register for SPLITs */ 736 if (chan->do_split) { 737 if (dbg_hc(chan)) 738 dev_vdbg(hsotg->dev, 739 "Programming HC %d with split --> %s\n", 740 hc_num, 741 chan->complete_split ? "CSPLIT" : "SSPLIT"); 742 if (chan->complete_split) 743 hcsplt |= HCSPLT_COMPSPLT; 744 hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & 745 HCSPLT_XACTPOS_MASK; 746 hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & 747 HCSPLT_HUBADDR_MASK; 748 hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & 749 HCSPLT_PRTADDR_MASK; 750 if (dbg_hc(chan)) { 751 dev_vdbg(hsotg->dev, " comp split %d\n", 752 chan->complete_split); 753 dev_vdbg(hsotg->dev, " xact pos %d\n", 754 chan->xact_pos); 755 dev_vdbg(hsotg->dev, " hub addr %d\n", 756 chan->hub_addr); 757 dev_vdbg(hsotg->dev, " hub port %d\n", 758 chan->hub_port); 759 dev_vdbg(hsotg->dev, " is_in %d\n", 760 chan->ep_is_in); 761 dev_vdbg(hsotg->dev, " Max Pkt %d\n", 762 chan->max_packet); 763 dev_vdbg(hsotg->dev, " xferlen %d\n", 764 chan->xfer_len); 765 } 766 } 767 768 dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num)); 769 } 770 771 /** 772 * dwc2_hc_halt() - Attempts to halt a host channel 773 * 774 * @hsotg: Controller register interface 775 * @chan: Host channel to halt 776 * @halt_status: Reason for halting the channel 777 * 778 * This function should only be called in Slave mode or to abort a transfer in 779 * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the 780 * controller halts the channel when the transfer is complete or a condition 781 * occurs that requires application intervention. 782 * 783 * In slave mode, checks for a free request queue entry, then sets the Channel 784 * Enable and Channel Disable bits of the Host Channel Characteristics 785 * register of the specified channel to intiate the halt. If there is no free 786 * request queue entry, sets only the Channel Disable bit of the HCCHARn 787 * register to flush requests for this channel. In the latter case, sets a 788 * flag to indicate that the host channel needs to be halted when a request 789 * queue slot is open. 790 * 791 * In DMA mode, always sets the Channel Enable and Channel Disable bits of the 792 * HCCHARn register. The controller ensures there is space in the request 793 * queue before submitting the halt request. 794 * 795 * Some time may elapse before the core flushes any posted requests for this 796 * host channel and halts. The Channel Halted interrupt handler completes the 797 * deactivation of the host channel. 798 */ 799 void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, 800 enum dwc2_halt_status halt_status) 801 { 802 u32 nptxsts, hptxsts, hcchar; 803 804 if (dbg_hc(chan)) 805 dev_vdbg(hsotg->dev, "%s()\n", __func__); 806 807 /* 808 * In buffer DMA or external DMA mode channel can't be halted 809 * for non-split periodic channels. At the end of the next 810 * uframe/frame (in the worst case), the core generates a channel 811 * halted and disables the channel automatically. 812 */ 813 if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) || 814 hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) { 815 if (!chan->do_split && 816 (chan->ep_type == USB_ENDPOINT_XFER_ISOC || 817 chan->ep_type == USB_ENDPOINT_XFER_INT)) { 818 dev_err(hsotg->dev, "%s() Channel can't be halted\n", 819 __func__); 820 return; 821 } 822 } 823 824 if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) 825 dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); 826 827 if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || 828 halt_status == DWC2_HC_XFER_AHB_ERR) { 829 /* 830 * Disable all channel interrupts except Ch Halted. The QTD 831 * and QH state associated with this transfer has been cleared 832 * (in the case of URB_DEQUEUE), so the channel needs to be 833 * shut down carefully to prevent crashes. 834 */ 835 u32 hcintmsk = HCINTMSK_CHHLTD; 836 837 dev_vdbg(hsotg->dev, "dequeue/error\n"); 838 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 839 840 /* 841 * Make sure no other interrupts besides halt are currently 842 * pending. Handling another interrupt could cause a crash due 843 * to the QTD and QH state. 844 */ 845 dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num)); 846 847 /* 848 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR 849 * even if the channel was already halted for some other 850 * reason 851 */ 852 chan->halt_status = halt_status; 853 854 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 855 if (!(hcchar & HCCHAR_CHENA)) { 856 /* 857 * The channel is either already halted or it hasn't 858 * started yet. In DMA mode, the transfer may halt if 859 * it finishes normally or a condition occurs that 860 * requires driver intervention. Don't want to halt 861 * the channel again. In either Slave or DMA mode, 862 * it's possible that the transfer has been assigned 863 * to a channel, but not started yet when an URB is 864 * dequeued. Don't want to halt a channel that hasn't 865 * started yet. 866 */ 867 return; 868 } 869 } 870 if (chan->halt_pending) { 871 /* 872 * A halt has already been issued for this channel. This might 873 * happen when a transfer is aborted by a higher level in 874 * the stack. 875 */ 876 dev_vdbg(hsotg->dev, 877 "*** %s: Channel %d, chan->halt_pending already set ***\n", 878 __func__, chan->hc_num); 879 return; 880 } 881 882 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 883 884 /* No need to set the bit in DDMA for disabling the channel */ 885 /* TODO check it everywhere channel is disabled */ 886 if (!hsotg->params.dma_desc_enable) { 887 if (dbg_hc(chan)) 888 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 889 hcchar |= HCCHAR_CHENA; 890 } else { 891 if (dbg_hc(chan)) 892 dev_dbg(hsotg->dev, "desc DMA enabled\n"); 893 } 894 hcchar |= HCCHAR_CHDIS; 895 896 if (!hsotg->params.host_dma) { 897 if (dbg_hc(chan)) 898 dev_vdbg(hsotg->dev, "DMA not enabled\n"); 899 hcchar |= HCCHAR_CHENA; 900 901 /* Check for space in the request queue to issue the halt */ 902 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || 903 chan->ep_type == USB_ENDPOINT_XFER_BULK) { 904 dev_vdbg(hsotg->dev, "control/bulk\n"); 905 nptxsts = dwc2_readl(hsotg, GNPTXSTS); 906 if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { 907 dev_vdbg(hsotg->dev, "Disabling channel\n"); 908 hcchar &= ~HCCHAR_CHENA; 909 } 910 } else { 911 if (dbg_perio()) 912 dev_vdbg(hsotg->dev, "isoc/intr\n"); 913 hptxsts = dwc2_readl(hsotg, HPTXSTS); 914 if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || 915 hsotg->queuing_high_bandwidth) { 916 if (dbg_perio()) 917 dev_vdbg(hsotg->dev, "Disabling channel\n"); 918 hcchar &= ~HCCHAR_CHENA; 919 } 920 } 921 } else { 922 if (dbg_hc(chan)) 923 dev_vdbg(hsotg->dev, "DMA enabled\n"); 924 } 925 926 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 927 chan->halt_status = halt_status; 928 929 if (hcchar & HCCHAR_CHENA) { 930 if (dbg_hc(chan)) 931 dev_vdbg(hsotg->dev, "Channel enabled\n"); 932 chan->halt_pending = 1; 933 chan->halt_on_queue = 0; 934 } else { 935 if (dbg_hc(chan)) 936 dev_vdbg(hsotg->dev, "Channel disabled\n"); 937 chan->halt_on_queue = 1; 938 } 939 940 if (dbg_hc(chan)) { 941 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 942 chan->hc_num); 943 dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", 944 hcchar); 945 dev_vdbg(hsotg->dev, " halt_pending: %d\n", 946 chan->halt_pending); 947 dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", 948 chan->halt_on_queue); 949 dev_vdbg(hsotg->dev, " halt_status: %d\n", 950 chan->halt_status); 951 } 952 } 953 954 /** 955 * dwc2_hc_cleanup() - Clears the transfer state for a host channel 956 * 957 * @hsotg: Programming view of DWC_otg controller 958 * @chan: Identifies the host channel to clean up 959 * 960 * This function is normally called after a transfer is done and the host 961 * channel is being released 962 */ 963 void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 964 { 965 u32 hcintmsk; 966 967 chan->xfer_started = 0; 968 969 list_del_init(&chan->split_order_list_entry); 970 971 /* 972 * Clear channel interrupt enables and any unhandled channel interrupt 973 * conditions 974 */ 975 dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num)); 976 hcintmsk = 0xffffffff; 977 hcintmsk &= ~HCINTMSK_RESERVED14_31; 978 dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num)); 979 } 980 981 /** 982 * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in 983 * which frame a periodic transfer should occur 984 * 985 * @hsotg: Programming view of DWC_otg controller 986 * @chan: Identifies the host channel to set up and its properties 987 * @hcchar: Current value of the HCCHAR register for the specified host channel 988 * 989 * This function has no effect on non-periodic transfers 990 */ 991 static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, 992 struct dwc2_host_chan *chan, u32 *hcchar) 993 { 994 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 995 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 996 int host_speed; 997 int xfer_ns; 998 int xfer_us; 999 int bytes_in_fifo; 1000 u16 fifo_space; 1001 u16 frame_number; 1002 u16 wire_frame; 1003 1004 /* 1005 * Try to figure out if we're an even or odd frame. If we set 1006 * even and the current frame number is even the the transfer 1007 * will happen immediately. Similar if both are odd. If one is 1008 * even and the other is odd then the transfer will happen when 1009 * the frame number ticks. 1010 * 1011 * There's a bit of a balancing act to get this right. 1012 * Sometimes we may want to send data in the current frame (AK 1013 * right away). We might want to do this if the frame number 1014 * _just_ ticked, but we might also want to do this in order 1015 * to continue a split transaction that happened late in a 1016 * microframe (so we didn't know to queue the next transfer 1017 * until the frame number had ticked). The problem is that we 1018 * need a lot of knowledge to know if there's actually still 1019 * time to send things or if it would be better to wait until 1020 * the next frame. 1021 * 1022 * We can look at how much time is left in the current frame 1023 * and make a guess about whether we'll have time to transfer. 1024 * We'll do that. 1025 */ 1026 1027 /* Get speed host is running at */ 1028 host_speed = (chan->speed != USB_SPEED_HIGH && 1029 !chan->do_split) ? chan->speed : USB_SPEED_HIGH; 1030 1031 /* See how many bytes are in the periodic FIFO right now */ 1032 fifo_space = (dwc2_readl(hsotg, HPTXSTS) & 1033 TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT; 1034 bytes_in_fifo = sizeof(u32) * 1035 (hsotg->params.host_perio_tx_fifo_size - 1036 fifo_space); 1037 1038 /* 1039 * Roughly estimate bus time for everything in the periodic 1040 * queue + our new transfer. This is "rough" because we're 1041 * using a function that makes takes into account IN/OUT 1042 * and INT/ISO and we're just slamming in one value for all 1043 * transfers. This should be an over-estimate and that should 1044 * be OK, but we can probably tighten it. 1045 */ 1046 xfer_ns = usb_calc_bus_time(host_speed, false, false, 1047 chan->xfer_len + bytes_in_fifo); 1048 xfer_us = NS_TO_US(xfer_ns); 1049 1050 /* See what frame number we'll be at by the time we finish */ 1051 frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us); 1052 1053 /* This is when we were scheduled to be on the wire */ 1054 wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1); 1055 1056 /* 1057 * If we'd finish _after_ the frame we're scheduled in then 1058 * it's hopeless. Just schedule right away and hope for the 1059 * best. Note that it _might_ be wise to call back into the 1060 * scheduler to pick a better frame, but this is better than 1061 * nothing. 1062 */ 1063 if (dwc2_frame_num_gt(frame_number, wire_frame)) { 1064 dwc2_sch_vdbg(hsotg, 1065 "QH=%p EO MISS fr=%04x=>%04x (%+d)\n", 1066 chan->qh, wire_frame, frame_number, 1067 dwc2_frame_num_dec(frame_number, 1068 wire_frame)); 1069 wire_frame = frame_number; 1070 1071 /* 1072 * We picked a different frame number; communicate this 1073 * back to the scheduler so it doesn't try to schedule 1074 * another in the same frame. 1075 * 1076 * Remember that next_active_frame is 1 before the wire 1077 * frame. 1078 */ 1079 chan->qh->next_active_frame = 1080 dwc2_frame_num_dec(frame_number, 1); 1081 } 1082 1083 if (wire_frame & 1) 1084 *hcchar |= HCCHAR_ODDFRM; 1085 else 1086 *hcchar &= ~HCCHAR_ODDFRM; 1087 } 1088 } 1089 1090 static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) 1091 { 1092 /* Set up the initial PID for the transfer */ 1093 if (chan->speed == USB_SPEED_HIGH) { 1094 if (chan->ep_is_in) { 1095 if (chan->multi_count == 1) 1096 chan->data_pid_start = DWC2_HC_PID_DATA0; 1097 else if (chan->multi_count == 2) 1098 chan->data_pid_start = DWC2_HC_PID_DATA1; 1099 else 1100 chan->data_pid_start = DWC2_HC_PID_DATA2; 1101 } else { 1102 if (chan->multi_count == 1) 1103 chan->data_pid_start = DWC2_HC_PID_DATA0; 1104 else 1105 chan->data_pid_start = DWC2_HC_PID_MDATA; 1106 } 1107 } else { 1108 chan->data_pid_start = DWC2_HC_PID_DATA0; 1109 } 1110 } 1111 1112 /** 1113 * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with 1114 * the Host Channel 1115 * 1116 * @hsotg: Programming view of DWC_otg controller 1117 * @chan: Information needed to initialize the host channel 1118 * 1119 * This function should only be called in Slave mode. For a channel associated 1120 * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel 1121 * associated with a periodic EP, the periodic Tx FIFO is written. 1122 * 1123 * Upon return the xfer_buf and xfer_count fields in chan are incremented by 1124 * the number of bytes written to the Tx FIFO. 1125 */ 1126 static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, 1127 struct dwc2_host_chan *chan) 1128 { 1129 u32 i; 1130 u32 remaining_count; 1131 u32 byte_count; 1132 u32 dword_count; 1133 u32 *data_buf = (u32 *)chan->xfer_buf; 1134 1135 if (dbg_hc(chan)) 1136 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1137 1138 remaining_count = chan->xfer_len - chan->xfer_count; 1139 if (remaining_count > chan->max_packet) 1140 byte_count = chan->max_packet; 1141 else 1142 byte_count = remaining_count; 1143 1144 dword_count = (byte_count + 3) / 4; 1145 1146 if (((unsigned long)data_buf & 0x3) == 0) { 1147 /* xfer_buf is DWORD aligned */ 1148 for (i = 0; i < dword_count; i++, data_buf++) 1149 dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num)); 1150 } else { 1151 /* xfer_buf is not DWORD aligned */ 1152 for (i = 0; i < dword_count; i++, data_buf++) { 1153 u32 data = data_buf[0] | data_buf[1] << 8 | 1154 data_buf[2] << 16 | data_buf[3] << 24; 1155 dwc2_writel(hsotg, data, HCFIFO(chan->hc_num)); 1156 } 1157 } 1158 1159 chan->xfer_count += byte_count; 1160 chan->xfer_buf += byte_count; 1161 } 1162 1163 /** 1164 * dwc2_hc_do_ping() - Starts a PING transfer 1165 * 1166 * @hsotg: Programming view of DWC_otg controller 1167 * @chan: Information needed to initialize the host channel 1168 * 1169 * This function should only be called in Slave mode. The Do Ping bit is set in 1170 * the HCTSIZ register, then the channel is enabled. 1171 */ 1172 static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, 1173 struct dwc2_host_chan *chan) 1174 { 1175 u32 hcchar; 1176 u32 hctsiz; 1177 1178 if (dbg_hc(chan)) 1179 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1180 chan->hc_num); 1181 1182 hctsiz = TSIZ_DOPNG; 1183 hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; 1184 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1185 1186 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1187 hcchar |= HCCHAR_CHENA; 1188 hcchar &= ~HCCHAR_CHDIS; 1189 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1190 } 1191 1192 /** 1193 * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host 1194 * channel and starts the transfer 1195 * 1196 * @hsotg: Programming view of DWC_otg controller 1197 * @chan: Information needed to initialize the host channel. The xfer_len value 1198 * may be reduced to accommodate the max widths of the XferSize and 1199 * PktCnt fields in the HCTSIZn register. The multi_count value may be 1200 * changed to reflect the final xfer_len value. 1201 * 1202 * This function may be called in either Slave mode or DMA mode. In Slave mode, 1203 * the caller must ensure that there is sufficient space in the request queue 1204 * and Tx Data FIFO. 1205 * 1206 * For an OUT transfer in Slave mode, it loads a data packet into the 1207 * appropriate FIFO. If necessary, additional data packets are loaded in the 1208 * Host ISR. 1209 * 1210 * For an IN transfer in Slave mode, a data packet is requested. The data 1211 * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, 1212 * additional data packets are requested in the Host ISR. 1213 * 1214 * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ 1215 * register along with a packet count of 1 and the channel is enabled. This 1216 * causes a single PING transaction to occur. Other fields in HCTSIZ are 1217 * simply set to 0 since no data transfer occurs in this case. 1218 * 1219 * For a PING transfer in DMA mode, the HCTSIZ register is initialized with 1220 * all the information required to perform the subsequent data transfer. In 1221 * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the 1222 * controller performs the entire PING protocol, then starts the data 1223 * transfer. 1224 */ 1225 static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, 1226 struct dwc2_host_chan *chan) 1227 { 1228 u32 max_hc_xfer_size = hsotg->params.max_transfer_size; 1229 u16 max_hc_pkt_count = hsotg->params.max_packet_count; 1230 u32 hcchar; 1231 u32 hctsiz = 0; 1232 u16 num_packets; 1233 u32 ec_mc; 1234 1235 if (dbg_hc(chan)) 1236 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1237 1238 if (chan->do_ping) { 1239 if (!hsotg->params.host_dma) { 1240 if (dbg_hc(chan)) 1241 dev_vdbg(hsotg->dev, "ping, no DMA\n"); 1242 dwc2_hc_do_ping(hsotg, chan); 1243 chan->xfer_started = 1; 1244 return; 1245 } 1246 1247 if (dbg_hc(chan)) 1248 dev_vdbg(hsotg->dev, "ping, DMA\n"); 1249 1250 hctsiz |= TSIZ_DOPNG; 1251 } 1252 1253 if (chan->do_split) { 1254 if (dbg_hc(chan)) 1255 dev_vdbg(hsotg->dev, "split\n"); 1256 num_packets = 1; 1257 1258 if (chan->complete_split && !chan->ep_is_in) 1259 /* 1260 * For CSPLIT OUT Transfer, set the size to 0 so the 1261 * core doesn't expect any data written to the FIFO 1262 */ 1263 chan->xfer_len = 0; 1264 else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) 1265 chan->xfer_len = chan->max_packet; 1266 else if (!chan->ep_is_in && chan->xfer_len > 188) 1267 chan->xfer_len = 188; 1268 1269 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1270 TSIZ_XFERSIZE_MASK; 1271 1272 /* For split set ec_mc for immediate retries */ 1273 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1274 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1275 ec_mc = 3; 1276 else 1277 ec_mc = 1; 1278 } else { 1279 if (dbg_hc(chan)) 1280 dev_vdbg(hsotg->dev, "no split\n"); 1281 /* 1282 * Ensure that the transfer length and packet count will fit 1283 * in the widths allocated for them in the HCTSIZn register 1284 */ 1285 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1286 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1287 /* 1288 * Make sure the transfer size is no larger than one 1289 * (micro)frame's worth of data. (A check was done 1290 * when the periodic transfer was accepted to ensure 1291 * that a (micro)frame's worth of data can be 1292 * programmed into a channel.) 1293 */ 1294 u32 max_periodic_len = 1295 chan->multi_count * chan->max_packet; 1296 1297 if (chan->xfer_len > max_periodic_len) 1298 chan->xfer_len = max_periodic_len; 1299 } else if (chan->xfer_len > max_hc_xfer_size) { 1300 /* 1301 * Make sure that xfer_len is a multiple of max packet 1302 * size 1303 */ 1304 chan->xfer_len = 1305 max_hc_xfer_size - chan->max_packet + 1; 1306 } 1307 1308 if (chan->xfer_len > 0) { 1309 num_packets = (chan->xfer_len + chan->max_packet - 1) / 1310 chan->max_packet; 1311 if (num_packets > max_hc_pkt_count) { 1312 num_packets = max_hc_pkt_count; 1313 chan->xfer_len = num_packets * chan->max_packet; 1314 } else if (chan->ep_is_in) { 1315 /* 1316 * Always program an integral # of max packets 1317 * for IN transfers. 1318 * Note: This assumes that the input buffer is 1319 * aligned and sized accordingly. 1320 */ 1321 chan->xfer_len = num_packets * chan->max_packet; 1322 } 1323 } else { 1324 /* Need 1 packet for transfer length of 0 */ 1325 num_packets = 1; 1326 } 1327 1328 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1329 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1330 /* 1331 * Make sure that the multi_count field matches the 1332 * actual transfer length 1333 */ 1334 chan->multi_count = num_packets; 1335 1336 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1337 dwc2_set_pid_isoc(chan); 1338 1339 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1340 TSIZ_XFERSIZE_MASK; 1341 1342 /* The ec_mc gets the multi_count for non-split */ 1343 ec_mc = chan->multi_count; 1344 } 1345 1346 chan->start_pkt_count = num_packets; 1347 hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; 1348 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1349 TSIZ_SC_MC_PID_MASK; 1350 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1351 if (dbg_hc(chan)) { 1352 dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", 1353 hctsiz, chan->hc_num); 1354 1355 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1356 chan->hc_num); 1357 dev_vdbg(hsotg->dev, " Xfer Size: %d\n", 1358 (hctsiz & TSIZ_XFERSIZE_MASK) >> 1359 TSIZ_XFERSIZE_SHIFT); 1360 dev_vdbg(hsotg->dev, " Num Pkts: %d\n", 1361 (hctsiz & TSIZ_PKTCNT_MASK) >> 1362 TSIZ_PKTCNT_SHIFT); 1363 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1364 (hctsiz & TSIZ_SC_MC_PID_MASK) >> 1365 TSIZ_SC_MC_PID_SHIFT); 1366 } 1367 1368 if (hsotg->params.host_dma) { 1369 dma_addr_t dma_addr; 1370 1371 if (chan->align_buf) { 1372 if (dbg_hc(chan)) 1373 dev_vdbg(hsotg->dev, "align_buf\n"); 1374 dma_addr = chan->align_buf; 1375 } else { 1376 dma_addr = chan->xfer_dma; 1377 } 1378 dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num)); 1379 1380 if (dbg_hc(chan)) 1381 dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", 1382 (unsigned long)dma_addr, chan->hc_num); 1383 } 1384 1385 /* Start the split */ 1386 if (chan->do_split) { 1387 u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 1388 1389 hcsplt |= HCSPLT_SPLTENA; 1390 dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num)); 1391 } 1392 1393 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1394 hcchar &= ~HCCHAR_MULTICNT_MASK; 1395 hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK; 1396 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1397 1398 if (hcchar & HCCHAR_CHDIS) 1399 dev_warn(hsotg->dev, 1400 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1401 __func__, chan->hc_num, hcchar); 1402 1403 /* Set host channel enable after all other setup is complete */ 1404 hcchar |= HCCHAR_CHENA; 1405 hcchar &= ~HCCHAR_CHDIS; 1406 1407 if (dbg_hc(chan)) 1408 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1409 (hcchar & HCCHAR_MULTICNT_MASK) >> 1410 HCCHAR_MULTICNT_SHIFT); 1411 1412 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1413 if (dbg_hc(chan)) 1414 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1415 chan->hc_num); 1416 1417 chan->xfer_started = 1; 1418 chan->requests++; 1419 1420 if (!hsotg->params.host_dma && 1421 !chan->ep_is_in && chan->xfer_len > 0) 1422 /* Load OUT packet into the appropriate Tx FIFO */ 1423 dwc2_hc_write_packet(hsotg, chan); 1424 } 1425 1426 /** 1427 * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a 1428 * host channel and starts the transfer in Descriptor DMA mode 1429 * 1430 * @hsotg: Programming view of DWC_otg controller 1431 * @chan: Information needed to initialize the host channel 1432 * 1433 * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. 1434 * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field 1435 * with micro-frame bitmap. 1436 * 1437 * Initializes HCDMA register with descriptor list address and CTD value then 1438 * starts the transfer via enabling the channel. 1439 */ 1440 void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, 1441 struct dwc2_host_chan *chan) 1442 { 1443 u32 hcchar; 1444 u32 hctsiz = 0; 1445 1446 if (chan->do_ping) 1447 hctsiz |= TSIZ_DOPNG; 1448 1449 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1450 dwc2_set_pid_isoc(chan); 1451 1452 /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ 1453 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1454 TSIZ_SC_MC_PID_MASK; 1455 1456 /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ 1457 hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; 1458 1459 /* Non-zero only for high-speed interrupt endpoints */ 1460 hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; 1461 1462 if (dbg_hc(chan)) { 1463 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1464 chan->hc_num); 1465 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1466 chan->data_pid_start); 1467 dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); 1468 } 1469 1470 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1471 1472 dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr, 1473 chan->desc_list_sz, DMA_TO_DEVICE); 1474 1475 dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num)); 1476 1477 if (dbg_hc(chan)) 1478 dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n", 1479 &chan->desc_list_addr, chan->hc_num); 1480 1481 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1482 hcchar &= ~HCCHAR_MULTICNT_MASK; 1483 hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & 1484 HCCHAR_MULTICNT_MASK; 1485 1486 if (hcchar & HCCHAR_CHDIS) 1487 dev_warn(hsotg->dev, 1488 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1489 __func__, chan->hc_num, hcchar); 1490 1491 /* Set host channel enable after all other setup is complete */ 1492 hcchar |= HCCHAR_CHENA; 1493 hcchar &= ~HCCHAR_CHDIS; 1494 1495 if (dbg_hc(chan)) 1496 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1497 (hcchar & HCCHAR_MULTICNT_MASK) >> 1498 HCCHAR_MULTICNT_SHIFT); 1499 1500 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1501 if (dbg_hc(chan)) 1502 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1503 chan->hc_num); 1504 1505 chan->xfer_started = 1; 1506 chan->requests++; 1507 } 1508 1509 /** 1510 * dwc2_hc_continue_transfer() - Continues a data transfer that was started by 1511 * a previous call to dwc2_hc_start_transfer() 1512 * 1513 * @hsotg: Programming view of DWC_otg controller 1514 * @chan: Information needed to initialize the host channel 1515 * 1516 * The caller must ensure there is sufficient space in the request queue and Tx 1517 * Data FIFO. This function should only be called in Slave mode. In DMA mode, 1518 * the controller acts autonomously to complete transfers programmed to a host 1519 * channel. 1520 * 1521 * For an OUT transfer, a new data packet is loaded into the appropriate FIFO 1522 * if there is any data remaining to be queued. For an IN transfer, another 1523 * data packet is always requested. For the SETUP phase of a control transfer, 1524 * this function does nothing. 1525 * 1526 * Return: 1 if a new request is queued, 0 if no more requests are required 1527 * for this transfer 1528 */ 1529 static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, 1530 struct dwc2_host_chan *chan) 1531 { 1532 if (dbg_hc(chan)) 1533 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1534 chan->hc_num); 1535 1536 if (chan->do_split) 1537 /* SPLITs always queue just once per channel */ 1538 return 0; 1539 1540 if (chan->data_pid_start == DWC2_HC_PID_SETUP) 1541 /* SETUPs are queued only once since they can't be NAK'd */ 1542 return 0; 1543 1544 if (chan->ep_is_in) { 1545 /* 1546 * Always queue another request for other IN transfers. If 1547 * back-to-back INs are issued and NAKs are received for both, 1548 * the driver may still be processing the first NAK when the 1549 * second NAK is received. When the interrupt handler clears 1550 * the NAK interrupt for the first NAK, the second NAK will 1551 * not be seen. So we can't depend on the NAK interrupt 1552 * handler to requeue a NAK'd request. Instead, IN requests 1553 * are issued each time this function is called. When the 1554 * transfer completes, the extra requests for the channel will 1555 * be flushed. 1556 */ 1557 u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1558 1559 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1560 hcchar |= HCCHAR_CHENA; 1561 hcchar &= ~HCCHAR_CHDIS; 1562 if (dbg_hc(chan)) 1563 dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", 1564 hcchar); 1565 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1566 chan->requests++; 1567 return 1; 1568 } 1569 1570 /* OUT transfers */ 1571 1572 if (chan->xfer_count < chan->xfer_len) { 1573 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1574 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1575 u32 hcchar = dwc2_readl(hsotg, 1576 HCCHAR(chan->hc_num)); 1577 1578 dwc2_hc_set_even_odd_frame(hsotg, chan, 1579 &hcchar); 1580 } 1581 1582 /* Load OUT packet into the appropriate Tx FIFO */ 1583 dwc2_hc_write_packet(hsotg, chan); 1584 chan->requests++; 1585 return 1; 1586 } 1587 1588 return 0; 1589 } 1590 1591 /* 1592 * ========================================================================= 1593 * HCD 1594 * ========================================================================= 1595 */ 1596 1597 /* 1598 * Processes all the URBs in a single list of QHs. Completes them with 1599 * -ETIMEDOUT and frees the QTD. 1600 * 1601 * Must be called with interrupt disabled and spinlock held 1602 */ 1603 static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, 1604 struct list_head *qh_list) 1605 { 1606 struct dwc2_qh *qh, *qh_tmp; 1607 struct dwc2_qtd *qtd, *qtd_tmp; 1608 1609 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1610 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1611 qtd_list_entry) { 1612 dwc2_host_complete(hsotg, qtd, -ECONNRESET); 1613 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1614 } 1615 } 1616 } 1617 1618 static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, 1619 struct list_head *qh_list) 1620 { 1621 struct dwc2_qtd *qtd, *qtd_tmp; 1622 struct dwc2_qh *qh, *qh_tmp; 1623 unsigned long flags; 1624 1625 if (!qh_list->next) 1626 /* The list hasn't been initialized yet */ 1627 return; 1628 1629 spin_lock_irqsave(&hsotg->lock, flags); 1630 1631 /* Ensure there are no QTDs or URBs left */ 1632 dwc2_kill_urbs_in_qh_list(hsotg, qh_list); 1633 1634 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1635 dwc2_hcd_qh_unlink(hsotg, qh); 1636 1637 /* Free each QTD in the QH's QTD list */ 1638 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1639 qtd_list_entry) 1640 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1641 1642 if (qh->channel && qh->channel->qh == qh) 1643 qh->channel->qh = NULL; 1644 1645 spin_unlock_irqrestore(&hsotg->lock, flags); 1646 dwc2_hcd_qh_free(hsotg, qh); 1647 spin_lock_irqsave(&hsotg->lock, flags); 1648 } 1649 1650 spin_unlock_irqrestore(&hsotg->lock, flags); 1651 } 1652 1653 /* 1654 * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic 1655 * and periodic schedules. The QTD associated with each URB is removed from 1656 * the schedule and freed. This function may be called when a disconnect is 1657 * detected or when the HCD is being stopped. 1658 * 1659 * Must be called with interrupt disabled and spinlock held 1660 */ 1661 static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) 1662 { 1663 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); 1664 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting); 1665 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); 1666 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); 1667 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); 1668 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); 1669 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); 1670 } 1671 1672 /** 1673 * dwc2_hcd_start() - Starts the HCD when switching to Host mode 1674 * 1675 * @hsotg: Pointer to struct dwc2_hsotg 1676 */ 1677 void dwc2_hcd_start(struct dwc2_hsotg *hsotg) 1678 { 1679 u32 hprt0; 1680 1681 if (hsotg->op_state == OTG_STATE_B_HOST) { 1682 /* 1683 * Reset the port. During a HNP mode switch the reset 1684 * needs to occur within 1ms and have a duration of at 1685 * least 50ms. 1686 */ 1687 hprt0 = dwc2_read_hprt0(hsotg); 1688 hprt0 |= HPRT0_RST; 1689 dwc2_writel(hsotg, hprt0, HPRT0); 1690 } 1691 1692 queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, 1693 msecs_to_jiffies(50)); 1694 } 1695 1696 /* Must be called with interrupt disabled and spinlock held */ 1697 static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) 1698 { 1699 int num_channels = hsotg->params.host_channels; 1700 struct dwc2_host_chan *channel; 1701 u32 hcchar; 1702 int i; 1703 1704 if (!hsotg->params.host_dma) { 1705 /* Flush out any channel requests in slave mode */ 1706 for (i = 0; i < num_channels; i++) { 1707 channel = hsotg->hc_ptr_array[i]; 1708 if (!list_empty(&channel->hc_list_entry)) 1709 continue; 1710 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1711 if (hcchar & HCCHAR_CHENA) { 1712 hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); 1713 hcchar |= HCCHAR_CHDIS; 1714 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1715 } 1716 } 1717 } 1718 1719 for (i = 0; i < num_channels; i++) { 1720 channel = hsotg->hc_ptr_array[i]; 1721 if (!list_empty(&channel->hc_list_entry)) 1722 continue; 1723 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1724 if (hcchar & HCCHAR_CHENA) { 1725 /* Halt the channel */ 1726 hcchar |= HCCHAR_CHDIS; 1727 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1728 } 1729 1730 dwc2_hc_cleanup(hsotg, channel); 1731 list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); 1732 /* 1733 * Added for Descriptor DMA to prevent channel double cleanup in 1734 * release_channel_ddma(), which is called from ep_disable when 1735 * device disconnects 1736 */ 1737 channel->qh = NULL; 1738 } 1739 /* All channels have been freed, mark them available */ 1740 if (hsotg->params.uframe_sched) { 1741 hsotg->available_host_channels = 1742 hsotg->params.host_channels; 1743 } else { 1744 hsotg->non_periodic_channels = 0; 1745 hsotg->periodic_channels = 0; 1746 } 1747 } 1748 1749 /** 1750 * dwc2_hcd_connect() - Handles connect of the HCD 1751 * 1752 * @hsotg: Pointer to struct dwc2_hsotg 1753 * 1754 * Must be called with interrupt disabled and spinlock held 1755 */ 1756 void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) 1757 { 1758 if (hsotg->lx_state != DWC2_L0) 1759 usb_hcd_resume_root_hub(hsotg->priv); 1760 1761 hsotg->flags.b.port_connect_status_change = 1; 1762 hsotg->flags.b.port_connect_status = 1; 1763 } 1764 1765 /** 1766 * dwc2_hcd_disconnect() - Handles disconnect of the HCD 1767 * 1768 * @hsotg: Pointer to struct dwc2_hsotg 1769 * @force: If true, we won't try to reconnect even if we see device connected. 1770 * 1771 * Must be called with interrupt disabled and spinlock held 1772 */ 1773 void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) 1774 { 1775 u32 intr; 1776 u32 hprt0; 1777 1778 /* Set status flags for the hub driver */ 1779 hsotg->flags.b.port_connect_status_change = 1; 1780 hsotg->flags.b.port_connect_status = 0; 1781 1782 /* 1783 * Shutdown any transfers in process by clearing the Tx FIFO Empty 1784 * interrupt mask and status bits and disabling subsequent host 1785 * channel interrupts. 1786 */ 1787 intr = dwc2_readl(hsotg, GINTMSK); 1788 intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); 1789 dwc2_writel(hsotg, intr, GINTMSK); 1790 intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; 1791 dwc2_writel(hsotg, intr, GINTSTS); 1792 1793 /* 1794 * Turn off the vbus power only if the core has transitioned to device 1795 * mode. If still in host mode, need to keep power on to detect a 1796 * reconnection. 1797 */ 1798 if (dwc2_is_device_mode(hsotg)) { 1799 if (hsotg->op_state != OTG_STATE_A_SUSPEND) { 1800 dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); 1801 dwc2_writel(hsotg, 0, HPRT0); 1802 } 1803 1804 dwc2_disable_host_interrupts(hsotg); 1805 } 1806 1807 /* Respond with an error status to all URBs in the schedule */ 1808 dwc2_kill_all_urbs(hsotg); 1809 1810 if (dwc2_is_host_mode(hsotg)) 1811 /* Clean up any host channels that were in use */ 1812 dwc2_hcd_cleanup_channels(hsotg); 1813 1814 dwc2_host_disconnect(hsotg); 1815 1816 /* 1817 * Add an extra check here to see if we're actually connected but 1818 * we don't have a detection interrupt pending. This can happen if: 1819 * 1. hardware sees connect 1820 * 2. hardware sees disconnect 1821 * 3. hardware sees connect 1822 * 4. dwc2_port_intr() - clears connect interrupt 1823 * 5. dwc2_handle_common_intr() - calls here 1824 * 1825 * Without the extra check here we will end calling disconnect 1826 * and won't get any future interrupts to handle the connect. 1827 */ 1828 if (!force) { 1829 hprt0 = dwc2_readl(hsotg, HPRT0); 1830 if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS)) 1831 dwc2_hcd_connect(hsotg); 1832 } 1833 } 1834 1835 /** 1836 * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup 1837 * 1838 * @hsotg: Pointer to struct dwc2_hsotg 1839 */ 1840 static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) 1841 { 1842 if (hsotg->bus_suspended) { 1843 hsotg->flags.b.port_suspend_change = 1; 1844 usb_hcd_resume_root_hub(hsotg->priv); 1845 } 1846 1847 if (hsotg->lx_state == DWC2_L1) 1848 hsotg->flags.b.port_l1_change = 1; 1849 } 1850 1851 /** 1852 * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner 1853 * 1854 * @hsotg: Pointer to struct dwc2_hsotg 1855 * 1856 * Must be called with interrupt disabled and spinlock held 1857 */ 1858 void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) 1859 { 1860 dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); 1861 1862 /* 1863 * The root hub should be disconnected before this function is called. 1864 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) 1865 * and the QH lists (via ..._hcd_endpoint_disable). 1866 */ 1867 1868 /* Turn off all host-specific interrupts */ 1869 dwc2_disable_host_interrupts(hsotg); 1870 1871 /* Turn off the vbus power */ 1872 dev_dbg(hsotg->dev, "PortPower off\n"); 1873 dwc2_writel(hsotg, 0, HPRT0); 1874 } 1875 1876 /* Caller must hold driver lock */ 1877 static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, 1878 struct dwc2_hcd_urb *urb, struct dwc2_qh *qh, 1879 struct dwc2_qtd *qtd) 1880 { 1881 u32 intr_mask; 1882 int retval; 1883 int dev_speed; 1884 1885 if (!hsotg->flags.b.port_connect_status) { 1886 /* No longer connected */ 1887 dev_err(hsotg->dev, "Not connected\n"); 1888 return -ENODEV; 1889 } 1890 1891 dev_speed = dwc2_host_get_speed(hsotg, urb->priv); 1892 1893 /* Some configurations cannot support LS traffic on a FS root port */ 1894 if ((dev_speed == USB_SPEED_LOW) && 1895 (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && 1896 (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { 1897 u32 hprt0 = dwc2_readl(hsotg, HPRT0); 1898 u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 1899 1900 if (prtspd == HPRT0_SPD_FULL_SPEED) 1901 return -ENODEV; 1902 } 1903 1904 if (!qtd) 1905 return -EINVAL; 1906 1907 dwc2_hcd_qtd_init(qtd, urb); 1908 retval = dwc2_hcd_qtd_add(hsotg, qtd, qh); 1909 if (retval) { 1910 dev_err(hsotg->dev, 1911 "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", 1912 retval); 1913 return retval; 1914 } 1915 1916 intr_mask = dwc2_readl(hsotg, GINTMSK); 1917 if (!(intr_mask & GINTSTS_SOF)) { 1918 enum dwc2_transaction_type tr_type; 1919 1920 if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && 1921 !(qtd->urb->flags & URB_GIVEBACK_ASAP)) 1922 /* 1923 * Do not schedule SG transactions until qtd has 1924 * URB_GIVEBACK_ASAP set 1925 */ 1926 return 0; 1927 1928 tr_type = dwc2_hcd_select_transactions(hsotg); 1929 if (tr_type != DWC2_TRANSACTION_NONE) 1930 dwc2_hcd_queue_transactions(hsotg, tr_type); 1931 } 1932 1933 return 0; 1934 } 1935 1936 /* Must be called with interrupt disabled and spinlock held */ 1937 static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, 1938 struct dwc2_hcd_urb *urb) 1939 { 1940 struct dwc2_qh *qh; 1941 struct dwc2_qtd *urb_qtd; 1942 1943 urb_qtd = urb->qtd; 1944 if (!urb_qtd) { 1945 dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); 1946 return -EINVAL; 1947 } 1948 1949 qh = urb_qtd->qh; 1950 if (!qh) { 1951 dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); 1952 return -EINVAL; 1953 } 1954 1955 urb->priv = NULL; 1956 1957 if (urb_qtd->in_process && qh->channel) { 1958 dwc2_dump_channel_info(hsotg, qh->channel); 1959 1960 /* The QTD is in process (it has been assigned to a channel) */ 1961 if (hsotg->flags.b.port_connect_status) 1962 /* 1963 * If still connected (i.e. in host mode), halt the 1964 * channel so it can be used for other transfers. If 1965 * no longer connected, the host registers can't be 1966 * written to halt the channel since the core is in 1967 * device mode. 1968 */ 1969 dwc2_hc_halt(hsotg, qh->channel, 1970 DWC2_HC_XFER_URB_DEQUEUE); 1971 } 1972 1973 /* 1974 * Free the QTD and clean up the associated QH. Leave the QH in the 1975 * schedule if it has any remaining QTDs. 1976 */ 1977 if (!hsotg->params.dma_desc_enable) { 1978 u8 in_process = urb_qtd->in_process; 1979 1980 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1981 if (in_process) { 1982 dwc2_hcd_qh_deactivate(hsotg, qh, 0); 1983 qh->channel = NULL; 1984 } else if (list_empty(&qh->qtd_list)) { 1985 dwc2_hcd_qh_unlink(hsotg, qh); 1986 } 1987 } else { 1988 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1989 } 1990 1991 return 0; 1992 } 1993 1994 /* Must NOT be called with interrupt disabled or spinlock held */ 1995 static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, 1996 struct usb_host_endpoint *ep, int retry) 1997 { 1998 struct dwc2_qtd *qtd, *qtd_tmp; 1999 struct dwc2_qh *qh; 2000 unsigned long flags; 2001 int rc; 2002 2003 spin_lock_irqsave(&hsotg->lock, flags); 2004 2005 qh = ep->hcpriv; 2006 if (!qh) { 2007 rc = -EINVAL; 2008 goto err; 2009 } 2010 2011 while (!list_empty(&qh->qtd_list) && retry--) { 2012 if (retry == 0) { 2013 dev_err(hsotg->dev, 2014 "## timeout in dwc2_hcd_endpoint_disable() ##\n"); 2015 rc = -EBUSY; 2016 goto err; 2017 } 2018 2019 spin_unlock_irqrestore(&hsotg->lock, flags); 2020 msleep(20); 2021 spin_lock_irqsave(&hsotg->lock, flags); 2022 qh = ep->hcpriv; 2023 if (!qh) { 2024 rc = -EINVAL; 2025 goto err; 2026 } 2027 } 2028 2029 dwc2_hcd_qh_unlink(hsotg, qh); 2030 2031 /* Free each QTD in the QH's QTD list */ 2032 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) 2033 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 2034 2035 ep->hcpriv = NULL; 2036 2037 if (qh->channel && qh->channel->qh == qh) 2038 qh->channel->qh = NULL; 2039 2040 spin_unlock_irqrestore(&hsotg->lock, flags); 2041 2042 dwc2_hcd_qh_free(hsotg, qh); 2043 2044 return 0; 2045 2046 err: 2047 ep->hcpriv = NULL; 2048 spin_unlock_irqrestore(&hsotg->lock, flags); 2049 2050 return rc; 2051 } 2052 2053 /* Must be called with interrupt disabled and spinlock held */ 2054 static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, 2055 struct usb_host_endpoint *ep) 2056 { 2057 struct dwc2_qh *qh = ep->hcpriv; 2058 2059 if (!qh) 2060 return -EINVAL; 2061 2062 qh->data_toggle = DWC2_HC_PID_DATA0; 2063 2064 return 0; 2065 } 2066 2067 /** 2068 * dwc2_core_init() - Initializes the DWC_otg controller registers and 2069 * prepares the core for device mode or host mode operation 2070 * 2071 * @hsotg: Programming view of the DWC_otg controller 2072 * @initial_setup: If true then this is the first init for this instance. 2073 */ 2074 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) 2075 { 2076 u32 usbcfg, otgctl; 2077 int retval; 2078 2079 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2080 2081 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2082 2083 /* Set ULPI External VBUS bit if needed */ 2084 usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; 2085 if (hsotg->params.phy_ulpi_ext_vbus) 2086 usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; 2087 2088 /* Set external TS Dline pulsing bit if needed */ 2089 usbcfg &= ~GUSBCFG_TERMSELDLPULSE; 2090 if (hsotg->params.ts_dline) 2091 usbcfg |= GUSBCFG_TERMSELDLPULSE; 2092 2093 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2094 2095 /* 2096 * Reset the Controller 2097 * 2098 * We only need to reset the controller if this is a re-init. 2099 * For the first init we know for sure that earlier code reset us (it 2100 * needed to in order to properly detect various parameters). 2101 */ 2102 if (!initial_setup) { 2103 retval = dwc2_core_reset(hsotg, false); 2104 if (retval) { 2105 dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", 2106 __func__); 2107 return retval; 2108 } 2109 } 2110 2111 /* 2112 * This needs to happen in FS mode before any other programming occurs 2113 */ 2114 retval = dwc2_phy_init(hsotg, initial_setup); 2115 if (retval) 2116 return retval; 2117 2118 /* Program the GAHBCFG Register */ 2119 retval = dwc2_gahbcfg_init(hsotg); 2120 if (retval) 2121 return retval; 2122 2123 /* Program the GUSBCFG register */ 2124 dwc2_gusbcfg_init(hsotg); 2125 2126 /* Program the GOTGCTL register */ 2127 otgctl = dwc2_readl(hsotg, GOTGCTL); 2128 otgctl &= ~GOTGCTL_OTGVER; 2129 dwc2_writel(hsotg, otgctl, GOTGCTL); 2130 2131 /* Clear the SRP success bit for FS-I2c */ 2132 hsotg->srp_success = 0; 2133 2134 /* Enable common interrupts */ 2135 dwc2_enable_common_interrupts(hsotg); 2136 2137 /* 2138 * Do device or host initialization based on mode during PCD and 2139 * HCD initialization 2140 */ 2141 if (dwc2_is_host_mode(hsotg)) { 2142 dev_dbg(hsotg->dev, "Host Mode\n"); 2143 hsotg->op_state = OTG_STATE_A_HOST; 2144 } else { 2145 dev_dbg(hsotg->dev, "Device Mode\n"); 2146 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 2147 } 2148 2149 return 0; 2150 } 2151 2152 /** 2153 * dwc2_core_host_init() - Initializes the DWC_otg controller registers for 2154 * Host mode 2155 * 2156 * @hsotg: Programming view of DWC_otg controller 2157 * 2158 * This function flushes the Tx and Rx FIFOs and flushes any entries in the 2159 * request queues. Host channels are reset to ensure that they are ready for 2160 * performing transfers. 2161 */ 2162 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg) 2163 { 2164 u32 hcfg, hfir, otgctl, usbcfg; 2165 2166 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2167 2168 /* Set HS/FS Timeout Calibration to 7 (max available value). 2169 * The number of PHY clocks that the application programs in 2170 * this field is added to the high/full speed interpacket timeout 2171 * duration in the core to account for any additional delays 2172 * introduced by the PHY. This can be required, because the delay 2173 * introduced by the PHY in generating the linestate condition 2174 * can vary from one PHY to another. 2175 */ 2176 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2177 usbcfg |= GUSBCFG_TOUTCAL(7); 2178 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2179 2180 /* Restart the Phy Clock */ 2181 dwc2_writel(hsotg, 0, PCGCTL); 2182 2183 /* Initialize Host Configuration Register */ 2184 dwc2_init_fs_ls_pclk_sel(hsotg); 2185 if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || 2186 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) { 2187 hcfg = dwc2_readl(hsotg, HCFG); 2188 hcfg |= HCFG_FSLSSUPP; 2189 dwc2_writel(hsotg, hcfg, HCFG); 2190 } 2191 2192 /* 2193 * This bit allows dynamic reloading of the HFIR register during 2194 * runtime. This bit needs to be programmed during initial configuration 2195 * and its value must not be changed during runtime. 2196 */ 2197 if (hsotg->params.reload_ctl) { 2198 hfir = dwc2_readl(hsotg, HFIR); 2199 hfir |= HFIR_RLDCTRL; 2200 dwc2_writel(hsotg, hfir, HFIR); 2201 } 2202 2203 if (hsotg->params.dma_desc_enable) { 2204 u32 op_mode = hsotg->hw_params.op_mode; 2205 2206 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || 2207 !hsotg->hw_params.dma_desc_enable || 2208 op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || 2209 op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || 2210 op_mode == GHWCFG2_OP_MODE_UNDEFINED) { 2211 dev_err(hsotg->dev, 2212 "Hardware does not support descriptor DMA mode -\n"); 2213 dev_err(hsotg->dev, 2214 "falling back to buffer DMA mode.\n"); 2215 hsotg->params.dma_desc_enable = false; 2216 } else { 2217 hcfg = dwc2_readl(hsotg, HCFG); 2218 hcfg |= HCFG_DESCDMA; 2219 dwc2_writel(hsotg, hcfg, HCFG); 2220 } 2221 } 2222 2223 /* Configure data FIFO sizes */ 2224 dwc2_config_fifos(hsotg); 2225 2226 /* TODO - check this */ 2227 /* Clear Host Set HNP Enable in the OTG Control Register */ 2228 otgctl = dwc2_readl(hsotg, GOTGCTL); 2229 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2230 dwc2_writel(hsotg, otgctl, GOTGCTL); 2231 2232 /* Make sure the FIFOs are flushed */ 2233 dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); 2234 dwc2_flush_rx_fifo(hsotg); 2235 2236 /* Clear Host Set HNP Enable in the OTG Control Register */ 2237 otgctl = dwc2_readl(hsotg, GOTGCTL); 2238 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2239 dwc2_writel(hsotg, otgctl, GOTGCTL); 2240 2241 if (!hsotg->params.dma_desc_enable) { 2242 int num_channels, i; 2243 u32 hcchar; 2244 2245 /* Flush out any leftover queued requests */ 2246 num_channels = hsotg->params.host_channels; 2247 for (i = 0; i < num_channels; i++) { 2248 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2249 if (hcchar & HCCHAR_CHENA) { 2250 hcchar &= ~HCCHAR_CHENA; 2251 hcchar |= HCCHAR_CHDIS; 2252 hcchar &= ~HCCHAR_EPDIR; 2253 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2254 } 2255 } 2256 2257 /* Halt all channels to put them into a known state */ 2258 for (i = 0; i < num_channels; i++) { 2259 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2260 if (hcchar & HCCHAR_CHENA) { 2261 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; 2262 hcchar &= ~HCCHAR_EPDIR; 2263 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2264 dev_dbg(hsotg->dev, "%s: Halt channel %d\n", 2265 __func__, i); 2266 2267 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i), 2268 HCCHAR_CHENA, 2269 1000)) { 2270 dev_warn(hsotg->dev, 2271 "Unable to clear enable on channel %d\n", 2272 i); 2273 } 2274 } 2275 } 2276 } 2277 2278 /* Enable ACG feature in host mode, if supported */ 2279 dwc2_enable_acg(hsotg); 2280 2281 /* Turn on the vbus power */ 2282 dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); 2283 if (hsotg->op_state == OTG_STATE_A_HOST) { 2284 u32 hprt0 = dwc2_read_hprt0(hsotg); 2285 2286 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", 2287 !!(hprt0 & HPRT0_PWR)); 2288 if (!(hprt0 & HPRT0_PWR)) { 2289 hprt0 |= HPRT0_PWR; 2290 dwc2_writel(hsotg, hprt0, HPRT0); 2291 } 2292 } 2293 2294 dwc2_enable_host_interrupts(hsotg); 2295 } 2296 2297 /* 2298 * Initializes dynamic portions of the DWC_otg HCD state 2299 * 2300 * Must be called with interrupt disabled and spinlock held 2301 */ 2302 static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) 2303 { 2304 struct dwc2_host_chan *chan, *chan_tmp; 2305 int num_channels; 2306 int i; 2307 2308 hsotg->flags.d32 = 0; 2309 hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; 2310 2311 if (hsotg->params.uframe_sched) { 2312 hsotg->available_host_channels = 2313 hsotg->params.host_channels; 2314 } else { 2315 hsotg->non_periodic_channels = 0; 2316 hsotg->periodic_channels = 0; 2317 } 2318 2319 /* 2320 * Put all channels in the free channel list and clean up channel 2321 * states 2322 */ 2323 list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, 2324 hc_list_entry) 2325 list_del_init(&chan->hc_list_entry); 2326 2327 num_channels = hsotg->params.host_channels; 2328 for (i = 0; i < num_channels; i++) { 2329 chan = hsotg->hc_ptr_array[i]; 2330 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); 2331 dwc2_hc_cleanup(hsotg, chan); 2332 } 2333 2334 /* Initialize the DWC core for host mode operation */ 2335 dwc2_core_host_init(hsotg); 2336 } 2337 2338 static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, 2339 struct dwc2_host_chan *chan, 2340 struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) 2341 { 2342 int hub_addr, hub_port; 2343 2344 chan->do_split = 1; 2345 chan->xact_pos = qtd->isoc_split_pos; 2346 chan->complete_split = qtd->complete_split; 2347 dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); 2348 chan->hub_addr = (u8)hub_addr; 2349 chan->hub_port = (u8)hub_port; 2350 } 2351 2352 static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, 2353 struct dwc2_host_chan *chan, 2354 struct dwc2_qtd *qtd) 2355 { 2356 struct dwc2_hcd_urb *urb = qtd->urb; 2357 struct dwc2_hcd_iso_packet_desc *frame_desc; 2358 2359 switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { 2360 case USB_ENDPOINT_XFER_CONTROL: 2361 chan->ep_type = USB_ENDPOINT_XFER_CONTROL; 2362 2363 switch (qtd->control_phase) { 2364 case DWC2_CONTROL_SETUP: 2365 dev_vdbg(hsotg->dev, " Control setup transaction\n"); 2366 chan->do_ping = 0; 2367 chan->ep_is_in = 0; 2368 chan->data_pid_start = DWC2_HC_PID_SETUP; 2369 if (hsotg->params.host_dma) 2370 chan->xfer_dma = urb->setup_dma; 2371 else 2372 chan->xfer_buf = urb->setup_packet; 2373 chan->xfer_len = 8; 2374 break; 2375 2376 case DWC2_CONTROL_DATA: 2377 dev_vdbg(hsotg->dev, " Control data transaction\n"); 2378 chan->data_pid_start = qtd->data_toggle; 2379 break; 2380 2381 case DWC2_CONTROL_STATUS: 2382 /* 2383 * Direction is opposite of data direction or IN if no 2384 * data 2385 */ 2386 dev_vdbg(hsotg->dev, " Control status transaction\n"); 2387 if (urb->length == 0) 2388 chan->ep_is_in = 1; 2389 else 2390 chan->ep_is_in = 2391 dwc2_hcd_is_pipe_out(&urb->pipe_info); 2392 if (chan->ep_is_in) 2393 chan->do_ping = 0; 2394 chan->data_pid_start = DWC2_HC_PID_DATA1; 2395 chan->xfer_len = 0; 2396 if (hsotg->params.host_dma) 2397 chan->xfer_dma = hsotg->status_buf_dma; 2398 else 2399 chan->xfer_buf = hsotg->status_buf; 2400 break; 2401 } 2402 break; 2403 2404 case USB_ENDPOINT_XFER_BULK: 2405 chan->ep_type = USB_ENDPOINT_XFER_BULK; 2406 break; 2407 2408 case USB_ENDPOINT_XFER_INT: 2409 chan->ep_type = USB_ENDPOINT_XFER_INT; 2410 break; 2411 2412 case USB_ENDPOINT_XFER_ISOC: 2413 chan->ep_type = USB_ENDPOINT_XFER_ISOC; 2414 if (hsotg->params.dma_desc_enable) 2415 break; 2416 2417 frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; 2418 frame_desc->status = 0; 2419 2420 if (hsotg->params.host_dma) { 2421 chan->xfer_dma = urb->dma; 2422 chan->xfer_dma += frame_desc->offset + 2423 qtd->isoc_split_offset; 2424 } else { 2425 chan->xfer_buf = urb->buf; 2426 chan->xfer_buf += frame_desc->offset + 2427 qtd->isoc_split_offset; 2428 } 2429 2430 chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; 2431 2432 if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { 2433 if (chan->xfer_len <= 188) 2434 chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; 2435 else 2436 chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; 2437 } 2438 break; 2439 } 2440 } 2441 2442 static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, 2443 struct dwc2_qh *qh, 2444 struct dwc2_host_chan *chan) 2445 { 2446 if (!hsotg->unaligned_cache || 2447 chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) 2448 return -ENOMEM; 2449 2450 if (!qh->dw_align_buf) { 2451 qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, 2452 GFP_ATOMIC | GFP_DMA); 2453 if (!qh->dw_align_buf) 2454 return -ENOMEM; 2455 } 2456 2457 qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, 2458 DWC2_KMEM_UNALIGNED_BUF_SIZE, 2459 DMA_FROM_DEVICE); 2460 2461 if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { 2462 dev_err(hsotg->dev, "can't map align_buf\n"); 2463 chan->align_buf = 0; 2464 return -EINVAL; 2465 } 2466 2467 chan->align_buf = qh->dw_align_buf_dma; 2468 return 0; 2469 } 2470 2471 #define DWC2_USB_DMA_ALIGN 4 2472 2473 static void dwc2_free_dma_aligned_buffer(struct urb *urb) 2474 { 2475 void *stored_xfer_buffer; 2476 size_t length; 2477 2478 if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) 2479 return; 2480 2481 /* Restore urb->transfer_buffer from the end of the allocated area */ 2482 memcpy(&stored_xfer_buffer, 2483 PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length, 2484 dma_get_cache_alignment()), 2485 sizeof(urb->transfer_buffer)); 2486 2487 if (usb_urb_dir_in(urb)) { 2488 if (usb_pipeisoc(urb->pipe)) 2489 length = urb->transfer_buffer_length; 2490 else 2491 length = urb->actual_length; 2492 2493 memcpy(stored_xfer_buffer, urb->transfer_buffer, length); 2494 } 2495 kfree(urb->transfer_buffer); 2496 urb->transfer_buffer = stored_xfer_buffer; 2497 2498 urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; 2499 } 2500 2501 static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) 2502 { 2503 void *kmalloc_ptr; 2504 size_t kmalloc_size; 2505 2506 if (urb->num_sgs || urb->sg || 2507 urb->transfer_buffer_length == 0 || 2508 !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) 2509 return 0; 2510 2511 /* 2512 * Allocate a buffer with enough padding for original transfer_buffer 2513 * pointer. This allocation is guaranteed to be aligned properly for 2514 * DMA 2515 */ 2516 kmalloc_size = urb->transfer_buffer_length + 2517 (dma_get_cache_alignment() - 1) + 2518 sizeof(urb->transfer_buffer); 2519 2520 kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); 2521 if (!kmalloc_ptr) 2522 return -ENOMEM; 2523 2524 /* 2525 * Position value of original urb->transfer_buffer pointer to the end 2526 * of allocation for later referencing 2527 */ 2528 memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length, 2529 dma_get_cache_alignment()), 2530 &urb->transfer_buffer, sizeof(urb->transfer_buffer)); 2531 2532 if (usb_urb_dir_out(urb)) 2533 memcpy(kmalloc_ptr, urb->transfer_buffer, 2534 urb->transfer_buffer_length); 2535 urb->transfer_buffer = kmalloc_ptr; 2536 2537 urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; 2538 2539 return 0; 2540 } 2541 2542 static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, 2543 gfp_t mem_flags) 2544 { 2545 int ret; 2546 2547 /* We assume setup_dma is always aligned; warn if not */ 2548 WARN_ON_ONCE(urb->setup_dma && 2549 (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1))); 2550 2551 ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags); 2552 if (ret) 2553 return ret; 2554 2555 ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); 2556 if (ret) 2557 dwc2_free_dma_aligned_buffer(urb); 2558 2559 return ret; 2560 } 2561 2562 static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) 2563 { 2564 usb_hcd_unmap_urb_for_dma(hcd, urb); 2565 dwc2_free_dma_aligned_buffer(urb); 2566 } 2567 2568 /** 2569 * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host 2570 * channel and initializes the host channel to perform the transactions. The 2571 * host channel is removed from the free list. 2572 * 2573 * @hsotg: The HCD state structure 2574 * @qh: Transactions from the first QTD for this QH are selected and assigned 2575 * to a free host channel 2576 */ 2577 static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) 2578 { 2579 struct dwc2_host_chan *chan; 2580 struct dwc2_hcd_urb *urb; 2581 struct dwc2_qtd *qtd; 2582 2583 if (dbg_qh(qh)) 2584 dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); 2585 2586 if (list_empty(&qh->qtd_list)) { 2587 dev_dbg(hsotg->dev, "No QTDs in QH list\n"); 2588 return -ENOMEM; 2589 } 2590 2591 if (list_empty(&hsotg->free_hc_list)) { 2592 dev_dbg(hsotg->dev, "No free channel to assign\n"); 2593 return -ENOMEM; 2594 } 2595 2596 chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, 2597 hc_list_entry); 2598 2599 /* Remove host channel from free list */ 2600 list_del_init(&chan->hc_list_entry); 2601 2602 qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); 2603 urb = qtd->urb; 2604 qh->channel = chan; 2605 qtd->in_process = 1; 2606 2607 /* 2608 * Use usb_pipedevice to determine device address. This address is 2609 * 0 before the SET_ADDRESS command and the correct address afterward. 2610 */ 2611 chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); 2612 chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); 2613 chan->speed = qh->dev_speed; 2614 chan->max_packet = qh->maxp; 2615 2616 chan->xfer_started = 0; 2617 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; 2618 chan->error_state = (qtd->error_count > 0); 2619 chan->halt_on_queue = 0; 2620 chan->halt_pending = 0; 2621 chan->requests = 0; 2622 2623 /* 2624 * The following values may be modified in the transfer type section 2625 * below. The xfer_len value may be reduced when the transfer is 2626 * started to accommodate the max widths of the XferSize and PktCnt 2627 * fields in the HCTSIZn register. 2628 */ 2629 2630 chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); 2631 if (chan->ep_is_in) 2632 chan->do_ping = 0; 2633 else 2634 chan->do_ping = qh->ping_state; 2635 2636 chan->data_pid_start = qh->data_toggle; 2637 chan->multi_count = 1; 2638 2639 if (urb->actual_length > urb->length && 2640 !dwc2_hcd_is_pipe_in(&urb->pipe_info)) 2641 urb->actual_length = urb->length; 2642 2643 if (hsotg->params.host_dma) 2644 chan->xfer_dma = urb->dma + urb->actual_length; 2645 else 2646 chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; 2647 2648 chan->xfer_len = urb->length - urb->actual_length; 2649 chan->xfer_count = 0; 2650 2651 /* Set the split attributes if required */ 2652 if (qh->do_split) 2653 dwc2_hc_init_split(hsotg, chan, qtd, urb); 2654 else 2655 chan->do_split = 0; 2656 2657 /* Set the transfer attributes */ 2658 dwc2_hc_init_xfer(hsotg, chan, qtd); 2659 2660 /* For non-dword aligned buffers */ 2661 if (hsotg->params.host_dma && qh->do_split && 2662 chan->ep_is_in && (chan->xfer_dma & 0x3)) { 2663 dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); 2664 if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { 2665 dev_err(hsotg->dev, 2666 "Failed to allocate memory to handle non-aligned buffer\n"); 2667 /* Add channel back to free list */ 2668 chan->align_buf = 0; 2669 chan->multi_count = 0; 2670 list_add_tail(&chan->hc_list_entry, 2671 &hsotg->free_hc_list); 2672 qtd->in_process = 0; 2673 qh->channel = NULL; 2674 return -ENOMEM; 2675 } 2676 } else { 2677 /* 2678 * We assume that DMA is always aligned in non-split 2679 * case or split out case. Warn if not. 2680 */ 2681 WARN_ON_ONCE(hsotg->params.host_dma && 2682 (chan->xfer_dma & 0x3)); 2683 chan->align_buf = 0; 2684 } 2685 2686 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 2687 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 2688 /* 2689 * This value may be modified when the transfer is started 2690 * to reflect the actual transfer length 2691 */ 2692 chan->multi_count = qh->maxp_mult; 2693 2694 if (hsotg->params.dma_desc_enable) { 2695 chan->desc_list_addr = qh->desc_list_dma; 2696 chan->desc_list_sz = qh->desc_list_sz; 2697 } 2698 2699 dwc2_hc_init(hsotg, chan); 2700 chan->qh = qh; 2701 2702 return 0; 2703 } 2704 2705 /** 2706 * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer 2707 * schedule and assigns them to available host channels. Called from the HCD 2708 * interrupt handler functions. 2709 * 2710 * @hsotg: The HCD state structure 2711 * 2712 * Return: The types of new transactions that were assigned to host channels 2713 */ 2714 enum dwc2_transaction_type dwc2_hcd_select_transactions( 2715 struct dwc2_hsotg *hsotg) 2716 { 2717 enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; 2718 struct list_head *qh_ptr; 2719 struct dwc2_qh *qh; 2720 int num_channels; 2721 2722 #ifdef DWC2_DEBUG_SOF 2723 dev_vdbg(hsotg->dev, " Select Transactions\n"); 2724 #endif 2725 2726 /* Process entries in the periodic ready list */ 2727 qh_ptr = hsotg->periodic_sched_ready.next; 2728 while (qh_ptr != &hsotg->periodic_sched_ready) { 2729 if (list_empty(&hsotg->free_hc_list)) 2730 break; 2731 if (hsotg->params.uframe_sched) { 2732 if (hsotg->available_host_channels <= 1) 2733 break; 2734 hsotg->available_host_channels--; 2735 } 2736 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2737 if (dwc2_assign_and_init_hc(hsotg, qh)) 2738 break; 2739 2740 /* 2741 * Move the QH from the periodic ready schedule to the 2742 * periodic assigned schedule 2743 */ 2744 qh_ptr = qh_ptr->next; 2745 list_move_tail(&qh->qh_list_entry, 2746 &hsotg->periodic_sched_assigned); 2747 ret_val = DWC2_TRANSACTION_PERIODIC; 2748 } 2749 2750 /* 2751 * Process entries in the inactive portion of the non-periodic 2752 * schedule. Some free host channels may not be used if they are 2753 * reserved for periodic transfers. 2754 */ 2755 num_channels = hsotg->params.host_channels; 2756 qh_ptr = hsotg->non_periodic_sched_inactive.next; 2757 while (qh_ptr != &hsotg->non_periodic_sched_inactive) { 2758 if (!hsotg->params.uframe_sched && 2759 hsotg->non_periodic_channels >= num_channels - 2760 hsotg->periodic_channels) 2761 break; 2762 if (list_empty(&hsotg->free_hc_list)) 2763 break; 2764 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2765 if (hsotg->params.uframe_sched) { 2766 if (hsotg->available_host_channels < 1) 2767 break; 2768 hsotg->available_host_channels--; 2769 } 2770 2771 if (dwc2_assign_and_init_hc(hsotg, qh)) 2772 break; 2773 2774 /* 2775 * Move the QH from the non-periodic inactive schedule to the 2776 * non-periodic active schedule 2777 */ 2778 qh_ptr = qh_ptr->next; 2779 list_move_tail(&qh->qh_list_entry, 2780 &hsotg->non_periodic_sched_active); 2781 2782 if (ret_val == DWC2_TRANSACTION_NONE) 2783 ret_val = DWC2_TRANSACTION_NON_PERIODIC; 2784 else 2785 ret_val = DWC2_TRANSACTION_ALL; 2786 2787 if (!hsotg->params.uframe_sched) 2788 hsotg->non_periodic_channels++; 2789 } 2790 2791 return ret_val; 2792 } 2793 2794 /** 2795 * dwc2_queue_transaction() - Attempts to queue a single transaction request for 2796 * a host channel associated with either a periodic or non-periodic transfer 2797 * 2798 * @hsotg: The HCD state structure 2799 * @chan: Host channel descriptor associated with either a periodic or 2800 * non-periodic transfer 2801 * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO 2802 * for periodic transfers or the non-periodic Tx FIFO 2803 * for non-periodic transfers 2804 * 2805 * Return: 1 if a request is queued and more requests may be needed to 2806 * complete the transfer, 0 if no more requests are required for this 2807 * transfer, -1 if there is insufficient space in the Tx FIFO 2808 * 2809 * This function assumes that there is space available in the appropriate 2810 * request queue. For an OUT transfer or SETUP transaction in Slave mode, 2811 * it checks whether space is available in the appropriate Tx FIFO. 2812 * 2813 * Must be called with interrupt disabled and spinlock held 2814 */ 2815 static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, 2816 struct dwc2_host_chan *chan, 2817 u16 fifo_dwords_avail) 2818 { 2819 int retval = 0; 2820 2821 if (chan->do_split) 2822 /* Put ourselves on the list to keep order straight */ 2823 list_move_tail(&chan->split_order_list_entry, 2824 &hsotg->split_order); 2825 2826 if (hsotg->params.host_dma && chan->qh) { 2827 if (hsotg->params.dma_desc_enable) { 2828 if (!chan->xfer_started || 2829 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 2830 dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); 2831 chan->qh->ping_state = 0; 2832 } 2833 } else if (!chan->xfer_started) { 2834 dwc2_hc_start_transfer(hsotg, chan); 2835 chan->qh->ping_state = 0; 2836 } 2837 } else if (chan->halt_pending) { 2838 /* Don't queue a request if the channel has been halted */ 2839 } else if (chan->halt_on_queue) { 2840 dwc2_hc_halt(hsotg, chan, chan->halt_status); 2841 } else if (chan->do_ping) { 2842 if (!chan->xfer_started) 2843 dwc2_hc_start_transfer(hsotg, chan); 2844 } else if (!chan->ep_is_in || 2845 chan->data_pid_start == DWC2_HC_PID_SETUP) { 2846 if ((fifo_dwords_avail * 4) >= chan->max_packet) { 2847 if (!chan->xfer_started) { 2848 dwc2_hc_start_transfer(hsotg, chan); 2849 retval = 1; 2850 } else { 2851 retval = dwc2_hc_continue_transfer(hsotg, chan); 2852 } 2853 } else { 2854 retval = -1; 2855 } 2856 } else { 2857 if (!chan->xfer_started) { 2858 dwc2_hc_start_transfer(hsotg, chan); 2859 retval = 1; 2860 } else { 2861 retval = dwc2_hc_continue_transfer(hsotg, chan); 2862 } 2863 } 2864 2865 return retval; 2866 } 2867 2868 /* 2869 * Processes periodic channels for the next frame and queues transactions for 2870 * these channels to the DWC_otg controller. After queueing transactions, the 2871 * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions 2872 * to queue as Periodic Tx FIFO or request queue space becomes available. 2873 * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. 2874 * 2875 * Must be called with interrupt disabled and spinlock held 2876 */ 2877 static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) 2878 { 2879 struct list_head *qh_ptr; 2880 struct dwc2_qh *qh; 2881 u32 tx_status; 2882 u32 fspcavail; 2883 u32 gintmsk; 2884 int status; 2885 bool no_queue_space = false; 2886 bool no_fifo_space = false; 2887 u32 qspcavail; 2888 2889 /* If empty list then just adjust interrupt enables */ 2890 if (list_empty(&hsotg->periodic_sched_assigned)) 2891 goto exit; 2892 2893 if (dbg_perio()) 2894 dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); 2895 2896 tx_status = dwc2_readl(hsotg, HPTXSTS); 2897 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2898 TXSTS_QSPCAVAIL_SHIFT; 2899 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2900 TXSTS_FSPCAVAIL_SHIFT; 2901 2902 if (dbg_perio()) { 2903 dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", 2904 qspcavail); 2905 dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", 2906 fspcavail); 2907 } 2908 2909 qh_ptr = hsotg->periodic_sched_assigned.next; 2910 while (qh_ptr != &hsotg->periodic_sched_assigned) { 2911 tx_status = dwc2_readl(hsotg, HPTXSTS); 2912 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2913 TXSTS_QSPCAVAIL_SHIFT; 2914 if (qspcavail == 0) { 2915 no_queue_space = true; 2916 break; 2917 } 2918 2919 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2920 if (!qh->channel) { 2921 qh_ptr = qh_ptr->next; 2922 continue; 2923 } 2924 2925 /* Make sure EP's TT buffer is clean before queueing qtds */ 2926 if (qh->tt_buffer_dirty) { 2927 qh_ptr = qh_ptr->next; 2928 continue; 2929 } 2930 2931 /* 2932 * Set a flag if we're queuing high-bandwidth in slave mode. 2933 * The flag prevents any halts to get into the request queue in 2934 * the middle of multiple high-bandwidth packets getting queued. 2935 */ 2936 if (!hsotg->params.host_dma && 2937 qh->channel->multi_count > 1) 2938 hsotg->queuing_high_bandwidth = 1; 2939 2940 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2941 TXSTS_FSPCAVAIL_SHIFT; 2942 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 2943 if (status < 0) { 2944 no_fifo_space = true; 2945 break; 2946 } 2947 2948 /* 2949 * In Slave mode, stay on the current transfer until there is 2950 * nothing more to do or the high-bandwidth request count is 2951 * reached. In DMA mode, only need to queue one request. The 2952 * controller automatically handles multiple packets for 2953 * high-bandwidth transfers. 2954 */ 2955 if (hsotg->params.host_dma || status == 0 || 2956 qh->channel->requests == qh->channel->multi_count) { 2957 qh_ptr = qh_ptr->next; 2958 /* 2959 * Move the QH from the periodic assigned schedule to 2960 * the periodic queued schedule 2961 */ 2962 list_move_tail(&qh->qh_list_entry, 2963 &hsotg->periodic_sched_queued); 2964 2965 /* done queuing high bandwidth */ 2966 hsotg->queuing_high_bandwidth = 0; 2967 } 2968 } 2969 2970 exit: 2971 if (no_queue_space || no_fifo_space || 2972 (!hsotg->params.host_dma && 2973 !list_empty(&hsotg->periodic_sched_assigned))) { 2974 /* 2975 * May need to queue more transactions as the request 2976 * queue or Tx FIFO empties. Enable the periodic Tx 2977 * FIFO empty interrupt. (Always use the half-empty 2978 * level to ensure that new requests are loaded as 2979 * soon as possible.) 2980 */ 2981 gintmsk = dwc2_readl(hsotg, GINTMSK); 2982 if (!(gintmsk & GINTSTS_PTXFEMP)) { 2983 gintmsk |= GINTSTS_PTXFEMP; 2984 dwc2_writel(hsotg, gintmsk, GINTMSK); 2985 } 2986 } else { 2987 /* 2988 * Disable the Tx FIFO empty interrupt since there are 2989 * no more transactions that need to be queued right 2990 * now. This function is called from interrupt 2991 * handlers to queue more transactions as transfer 2992 * states change. 2993 */ 2994 gintmsk = dwc2_readl(hsotg, GINTMSK); 2995 if (gintmsk & GINTSTS_PTXFEMP) { 2996 gintmsk &= ~GINTSTS_PTXFEMP; 2997 dwc2_writel(hsotg, gintmsk, GINTMSK); 2998 } 2999 } 3000 } 3001 3002 /* 3003 * Processes active non-periodic channels and queues transactions for these 3004 * channels to the DWC_otg controller. After queueing transactions, the NP Tx 3005 * FIFO Empty interrupt is enabled if there are more transactions to queue as 3006 * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx 3007 * FIFO Empty interrupt is disabled. 3008 * 3009 * Must be called with interrupt disabled and spinlock held 3010 */ 3011 static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) 3012 { 3013 struct list_head *orig_qh_ptr; 3014 struct dwc2_qh *qh; 3015 u32 tx_status; 3016 u32 qspcavail; 3017 u32 fspcavail; 3018 u32 gintmsk; 3019 int status; 3020 int no_queue_space = 0; 3021 int no_fifo_space = 0; 3022 int more_to_do = 0; 3023 3024 dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); 3025 3026 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3027 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3028 TXSTS_QSPCAVAIL_SHIFT; 3029 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3030 TXSTS_FSPCAVAIL_SHIFT; 3031 dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", 3032 qspcavail); 3033 dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", 3034 fspcavail); 3035 3036 /* 3037 * Keep track of the starting point. Skip over the start-of-list 3038 * entry. 3039 */ 3040 if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) 3041 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3042 orig_qh_ptr = hsotg->non_periodic_qh_ptr; 3043 3044 /* 3045 * Process once through the active list or until no more space is 3046 * available in the request queue or the Tx FIFO 3047 */ 3048 do { 3049 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3050 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3051 TXSTS_QSPCAVAIL_SHIFT; 3052 if (!hsotg->params.host_dma && qspcavail == 0) { 3053 no_queue_space = 1; 3054 break; 3055 } 3056 3057 qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, 3058 qh_list_entry); 3059 if (!qh->channel) 3060 goto next; 3061 3062 /* Make sure EP's TT buffer is clean before queueing qtds */ 3063 if (qh->tt_buffer_dirty) 3064 goto next; 3065 3066 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3067 TXSTS_FSPCAVAIL_SHIFT; 3068 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 3069 3070 if (status > 0) { 3071 more_to_do = 1; 3072 } else if (status < 0) { 3073 no_fifo_space = 1; 3074 break; 3075 } 3076 next: 3077 /* Advance to next QH, skipping start-of-list entry */ 3078 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3079 if (hsotg->non_periodic_qh_ptr == 3080 &hsotg->non_periodic_sched_active) 3081 hsotg->non_periodic_qh_ptr = 3082 hsotg->non_periodic_qh_ptr->next; 3083 } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); 3084 3085 if (!hsotg->params.host_dma) { 3086 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3087 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3088 TXSTS_QSPCAVAIL_SHIFT; 3089 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3090 TXSTS_FSPCAVAIL_SHIFT; 3091 dev_vdbg(hsotg->dev, 3092 " NP Tx Req Queue Space Avail (after queue): %d\n", 3093 qspcavail); 3094 dev_vdbg(hsotg->dev, 3095 " NP Tx FIFO Space Avail (after queue): %d\n", 3096 fspcavail); 3097 3098 if (more_to_do || no_queue_space || no_fifo_space) { 3099 /* 3100 * May need to queue more transactions as the request 3101 * queue or Tx FIFO empties. Enable the non-periodic 3102 * Tx FIFO empty interrupt. (Always use the half-empty 3103 * level to ensure that new requests are loaded as 3104 * soon as possible.) 3105 */ 3106 gintmsk = dwc2_readl(hsotg, GINTMSK); 3107 gintmsk |= GINTSTS_NPTXFEMP; 3108 dwc2_writel(hsotg, gintmsk, GINTMSK); 3109 } else { 3110 /* 3111 * Disable the Tx FIFO empty interrupt since there are 3112 * no more transactions that need to be queued right 3113 * now. This function is called from interrupt 3114 * handlers to queue more transactions as transfer 3115 * states change. 3116 */ 3117 gintmsk = dwc2_readl(hsotg, GINTMSK); 3118 gintmsk &= ~GINTSTS_NPTXFEMP; 3119 dwc2_writel(hsotg, gintmsk, GINTMSK); 3120 } 3121 } 3122 } 3123 3124 /** 3125 * dwc2_hcd_queue_transactions() - Processes the currently active host channels 3126 * and queues transactions for these channels to the DWC_otg controller. Called 3127 * from the HCD interrupt handler functions. 3128 * 3129 * @hsotg: The HCD state structure 3130 * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, 3131 * or both) 3132 * 3133 * Must be called with interrupt disabled and spinlock held 3134 */ 3135 void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, 3136 enum dwc2_transaction_type tr_type) 3137 { 3138 #ifdef DWC2_DEBUG_SOF 3139 dev_vdbg(hsotg->dev, "Queue Transactions\n"); 3140 #endif 3141 /* Process host channels associated with periodic transfers */ 3142 if (tr_type == DWC2_TRANSACTION_PERIODIC || 3143 tr_type == DWC2_TRANSACTION_ALL) 3144 dwc2_process_periodic_channels(hsotg); 3145 3146 /* Process host channels associated with non-periodic transfers */ 3147 if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || 3148 tr_type == DWC2_TRANSACTION_ALL) { 3149 if (!list_empty(&hsotg->non_periodic_sched_active)) { 3150 dwc2_process_non_periodic_channels(hsotg); 3151 } else { 3152 /* 3153 * Ensure NP Tx FIFO empty interrupt is disabled when 3154 * there are no non-periodic transfers to process 3155 */ 3156 u32 gintmsk = dwc2_readl(hsotg, GINTMSK); 3157 3158 gintmsk &= ~GINTSTS_NPTXFEMP; 3159 dwc2_writel(hsotg, gintmsk, GINTMSK); 3160 } 3161 } 3162 } 3163 3164 static void dwc2_conn_id_status_change(struct work_struct *work) 3165 { 3166 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 3167 wf_otg); 3168 u32 count = 0; 3169 u32 gotgctl; 3170 unsigned long flags; 3171 3172 dev_dbg(hsotg->dev, "%s()\n", __func__); 3173 3174 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3175 dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); 3176 dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", 3177 !!(gotgctl & GOTGCTL_CONID_B)); 3178 3179 /* B-Device connector (Device Mode) */ 3180 if (gotgctl & GOTGCTL_CONID_B) { 3181 dwc2_vbus_supply_exit(hsotg); 3182 /* Wait for switch to device mode */ 3183 dev_dbg(hsotg->dev, "connId B\n"); 3184 if (hsotg->bus_suspended) { 3185 dev_info(hsotg->dev, 3186 "Do port resume before switching to device mode\n"); 3187 dwc2_port_resume(hsotg); 3188 } 3189 while (!dwc2_is_device_mode(hsotg)) { 3190 dev_info(hsotg->dev, 3191 "Waiting for Peripheral Mode, Mode=%s\n", 3192 dwc2_is_host_mode(hsotg) ? "Host" : 3193 "Peripheral"); 3194 msleep(20); 3195 /* 3196 * Sometimes the initial GOTGCTRL read is wrong, so 3197 * check it again and jump to host mode if that was 3198 * the case. 3199 */ 3200 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3201 if (!(gotgctl & GOTGCTL_CONID_B)) 3202 goto host; 3203 if (++count > 250) 3204 break; 3205 } 3206 if (count > 250) 3207 dev_err(hsotg->dev, 3208 "Connection id status change timed out\n"); 3209 3210 /* 3211 * Exit Partial Power Down without restoring registers. 3212 * No need to check the return value as registers 3213 * are not being restored. 3214 */ 3215 if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2) 3216 dwc2_exit_partial_power_down(hsotg, 0, false); 3217 3218 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 3219 dwc2_core_init(hsotg, false); 3220 dwc2_enable_global_interrupts(hsotg); 3221 spin_lock_irqsave(&hsotg->lock, flags); 3222 dwc2_hsotg_core_init_disconnected(hsotg, false); 3223 spin_unlock_irqrestore(&hsotg->lock, flags); 3224 /* Enable ACG feature in device mode,if supported */ 3225 dwc2_enable_acg(hsotg); 3226 dwc2_hsotg_core_connect(hsotg); 3227 } else { 3228 host: 3229 /* A-Device connector (Host Mode) */ 3230 dev_dbg(hsotg->dev, "connId A\n"); 3231 while (!dwc2_is_host_mode(hsotg)) { 3232 dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", 3233 dwc2_is_host_mode(hsotg) ? 3234 "Host" : "Peripheral"); 3235 msleep(20); 3236 if (++count > 250) 3237 break; 3238 } 3239 if (count > 250) 3240 dev_err(hsotg->dev, 3241 "Connection id status change timed out\n"); 3242 3243 spin_lock_irqsave(&hsotg->lock, flags); 3244 dwc2_hsotg_disconnect(hsotg); 3245 spin_unlock_irqrestore(&hsotg->lock, flags); 3246 3247 hsotg->op_state = OTG_STATE_A_HOST; 3248 /* Initialize the Core for Host mode */ 3249 dwc2_core_init(hsotg, false); 3250 dwc2_enable_global_interrupts(hsotg); 3251 dwc2_hcd_start(hsotg); 3252 } 3253 } 3254 3255 static void dwc2_wakeup_detected(struct timer_list *t) 3256 { 3257 struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer); 3258 u32 hprt0; 3259 3260 dev_dbg(hsotg->dev, "%s()\n", __func__); 3261 3262 /* 3263 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms 3264 * so that OPT tests pass with all PHYs.) 3265 */ 3266 hprt0 = dwc2_read_hprt0(hsotg); 3267 dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); 3268 hprt0 &= ~HPRT0_RES; 3269 dwc2_writel(hsotg, hprt0, HPRT0); 3270 dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", 3271 dwc2_readl(hsotg, HPRT0)); 3272 3273 dwc2_hcd_rem_wakeup(hsotg); 3274 hsotg->bus_suspended = false; 3275 3276 /* Change to L0 state */ 3277 hsotg->lx_state = DWC2_L0; 3278 } 3279 3280 static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) 3281 { 3282 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 3283 3284 return hcd->self.b_hnp_enable; 3285 } 3286 3287 /** 3288 * dwc2_port_suspend() - Put controller in suspend mode for host. 3289 * 3290 * @hsotg: Programming view of the DWC_otg controller 3291 * @windex: The control request wIndex field 3292 * 3293 * Return: non-zero if failed to enter suspend mode for host. 3294 * 3295 * This function is for entering Host mode suspend. 3296 * Must NOT be called with interrupt disabled or spinlock held. 3297 */ 3298 int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) 3299 { 3300 unsigned long flags; 3301 u32 pcgctl; 3302 u32 gotgctl; 3303 int ret = 0; 3304 3305 dev_dbg(hsotg->dev, "%s()\n", __func__); 3306 3307 spin_lock_irqsave(&hsotg->lock, flags); 3308 3309 if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { 3310 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3311 gotgctl |= GOTGCTL_HSTSETHNPEN; 3312 dwc2_writel(hsotg, gotgctl, GOTGCTL); 3313 hsotg->op_state = OTG_STATE_A_SUSPEND; 3314 } 3315 3316 switch (hsotg->params.power_down) { 3317 case DWC2_POWER_DOWN_PARAM_PARTIAL: 3318 ret = dwc2_enter_partial_power_down(hsotg); 3319 if (ret) 3320 dev_err(hsotg->dev, 3321 "enter partial_power_down failed.\n"); 3322 break; 3323 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 3324 /* 3325 * Perform spin unlock and lock because in 3326 * "dwc2_host_enter_hibernation()" function there is a spinlock 3327 * logic which prevents servicing of any IRQ during entering 3328 * hibernation. 3329 */ 3330 spin_unlock_irqrestore(&hsotg->lock, flags); 3331 ret = dwc2_enter_hibernation(hsotg, 1); 3332 if (ret) 3333 dev_err(hsotg->dev, "enter hibernation failed.\n"); 3334 spin_lock_irqsave(&hsotg->lock, flags); 3335 break; 3336 case DWC2_POWER_DOWN_PARAM_NONE: 3337 /* 3338 * If not hibernation nor partial power down are supported, 3339 * clock gating is used to save power. 3340 */ 3341 dwc2_host_enter_clock_gating(hsotg); 3342 break; 3343 } 3344 3345 /* For HNP the bus must be suspended for at least 200ms */ 3346 if (dwc2_host_is_b_hnp_enabled(hsotg)) { 3347 pcgctl = dwc2_readl(hsotg, PCGCTL); 3348 pcgctl &= ~PCGCTL_STOPPCLK; 3349 dwc2_writel(hsotg, pcgctl, PCGCTL); 3350 3351 spin_unlock_irqrestore(&hsotg->lock, flags); 3352 3353 msleep(200); 3354 } else { 3355 spin_unlock_irqrestore(&hsotg->lock, flags); 3356 } 3357 3358 return ret; 3359 } 3360 3361 /** 3362 * dwc2_port_resume() - Exit controller from suspend mode for host. 3363 * 3364 * @hsotg: Programming view of the DWC_otg controller 3365 * 3366 * Return: non-zero if failed to exit suspend mode for host. 3367 * 3368 * This function is for exiting Host mode suspend. 3369 * Must NOT be called with interrupt disabled or spinlock held. 3370 */ 3371 int dwc2_port_resume(struct dwc2_hsotg *hsotg) 3372 { 3373 unsigned long flags; 3374 int ret = 0; 3375 3376 spin_lock_irqsave(&hsotg->lock, flags); 3377 3378 switch (hsotg->params.power_down) { 3379 case DWC2_POWER_DOWN_PARAM_PARTIAL: 3380 ret = dwc2_exit_partial_power_down(hsotg, 0, true); 3381 if (ret) 3382 dev_err(hsotg->dev, 3383 "exit partial_power_down failed.\n"); 3384 break; 3385 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 3386 case DWC2_POWER_DOWN_PARAM_NONE: 3387 /* 3388 * If not hibernation nor partial power down are supported, 3389 * port resume is done using the clock gating programming flow. 3390 */ 3391 spin_unlock_irqrestore(&hsotg->lock, flags); 3392 dwc2_host_exit_clock_gating(hsotg, 0); 3393 spin_lock_irqsave(&hsotg->lock, flags); 3394 break; 3395 } 3396 3397 spin_unlock_irqrestore(&hsotg->lock, flags); 3398 3399 return ret; 3400 } 3401 3402 /* Handles hub class-specific requests */ 3403 static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, 3404 u16 wvalue, u16 windex, char *buf, u16 wlength) 3405 { 3406 struct usb_hub_descriptor *hub_desc; 3407 int retval = 0; 3408 u32 hprt0; 3409 u32 port_status; 3410 u32 speed; 3411 u32 pcgctl; 3412 u32 pwr; 3413 3414 switch (typereq) { 3415 case ClearHubFeature: 3416 dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); 3417 3418 switch (wvalue) { 3419 case C_HUB_LOCAL_POWER: 3420 case C_HUB_OVER_CURRENT: 3421 /* Nothing required here */ 3422 break; 3423 3424 default: 3425 retval = -EINVAL; 3426 dev_err(hsotg->dev, 3427 "ClearHubFeature request %1xh unknown\n", 3428 wvalue); 3429 } 3430 break; 3431 3432 case ClearPortFeature: 3433 if (wvalue != USB_PORT_FEAT_L1) 3434 if (!windex || windex > 1) 3435 goto error; 3436 switch (wvalue) { 3437 case USB_PORT_FEAT_ENABLE: 3438 dev_dbg(hsotg->dev, 3439 "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); 3440 hprt0 = dwc2_read_hprt0(hsotg); 3441 hprt0 |= HPRT0_ENA; 3442 dwc2_writel(hsotg, hprt0, HPRT0); 3443 break; 3444 3445 case USB_PORT_FEAT_SUSPEND: 3446 dev_dbg(hsotg->dev, 3447 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); 3448 3449 if (hsotg->bus_suspended) { 3450 if (hsotg->hibernated) 3451 dwc2_exit_hibernation(hsotg, 0, 0, 1); 3452 else 3453 dwc2_port_resume(hsotg); 3454 } 3455 break; 3456 3457 case USB_PORT_FEAT_POWER: 3458 dev_dbg(hsotg->dev, 3459 "ClearPortFeature USB_PORT_FEAT_POWER\n"); 3460 hprt0 = dwc2_read_hprt0(hsotg); 3461 pwr = hprt0 & HPRT0_PWR; 3462 hprt0 &= ~HPRT0_PWR; 3463 dwc2_writel(hsotg, hprt0, HPRT0); 3464 if (pwr) 3465 dwc2_vbus_supply_exit(hsotg); 3466 break; 3467 3468 case USB_PORT_FEAT_INDICATOR: 3469 dev_dbg(hsotg->dev, 3470 "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); 3471 /* Port indicator not supported */ 3472 break; 3473 3474 case USB_PORT_FEAT_C_CONNECTION: 3475 /* 3476 * Clears driver's internal Connect Status Change flag 3477 */ 3478 dev_dbg(hsotg->dev, 3479 "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); 3480 hsotg->flags.b.port_connect_status_change = 0; 3481 break; 3482 3483 case USB_PORT_FEAT_C_RESET: 3484 /* Clears driver's internal Port Reset Change flag */ 3485 dev_dbg(hsotg->dev, 3486 "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); 3487 hsotg->flags.b.port_reset_change = 0; 3488 break; 3489 3490 case USB_PORT_FEAT_C_ENABLE: 3491 /* 3492 * Clears the driver's internal Port Enable/Disable 3493 * Change flag 3494 */ 3495 dev_dbg(hsotg->dev, 3496 "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); 3497 hsotg->flags.b.port_enable_change = 0; 3498 break; 3499 3500 case USB_PORT_FEAT_C_SUSPEND: 3501 /* 3502 * Clears the driver's internal Port Suspend Change 3503 * flag, which is set when resume signaling on the host 3504 * port is complete 3505 */ 3506 dev_dbg(hsotg->dev, 3507 "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); 3508 hsotg->flags.b.port_suspend_change = 0; 3509 break; 3510 3511 case USB_PORT_FEAT_C_PORT_L1: 3512 dev_dbg(hsotg->dev, 3513 "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); 3514 hsotg->flags.b.port_l1_change = 0; 3515 break; 3516 3517 case USB_PORT_FEAT_C_OVER_CURRENT: 3518 dev_dbg(hsotg->dev, 3519 "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); 3520 hsotg->flags.b.port_over_current_change = 0; 3521 break; 3522 3523 default: 3524 retval = -EINVAL; 3525 dev_err(hsotg->dev, 3526 "ClearPortFeature request %1xh unknown or unsupported\n", 3527 wvalue); 3528 } 3529 break; 3530 3531 case GetHubDescriptor: 3532 dev_dbg(hsotg->dev, "GetHubDescriptor\n"); 3533 hub_desc = (struct usb_hub_descriptor *)buf; 3534 hub_desc->bDescLength = 9; 3535 hub_desc->bDescriptorType = USB_DT_HUB; 3536 hub_desc->bNbrPorts = 1; 3537 hub_desc->wHubCharacteristics = 3538 cpu_to_le16(HUB_CHAR_COMMON_LPSM | 3539 HUB_CHAR_INDV_PORT_OCPM); 3540 hub_desc->bPwrOn2PwrGood = 1; 3541 hub_desc->bHubContrCurrent = 0; 3542 hub_desc->u.hs.DeviceRemovable[0] = 0; 3543 hub_desc->u.hs.DeviceRemovable[1] = 0xff; 3544 break; 3545 3546 case GetHubStatus: 3547 dev_dbg(hsotg->dev, "GetHubStatus\n"); 3548 memset(buf, 0, 4); 3549 break; 3550 3551 case GetPortStatus: 3552 dev_vdbg(hsotg->dev, 3553 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, 3554 hsotg->flags.d32); 3555 if (!windex || windex > 1) 3556 goto error; 3557 3558 port_status = 0; 3559 if (hsotg->flags.b.port_connect_status_change) 3560 port_status |= USB_PORT_STAT_C_CONNECTION << 16; 3561 if (hsotg->flags.b.port_enable_change) 3562 port_status |= USB_PORT_STAT_C_ENABLE << 16; 3563 if (hsotg->flags.b.port_suspend_change) 3564 port_status |= USB_PORT_STAT_C_SUSPEND << 16; 3565 if (hsotg->flags.b.port_l1_change) 3566 port_status |= USB_PORT_STAT_C_L1 << 16; 3567 if (hsotg->flags.b.port_reset_change) 3568 port_status |= USB_PORT_STAT_C_RESET << 16; 3569 if (hsotg->flags.b.port_over_current_change) { 3570 dev_warn(hsotg->dev, "Overcurrent change detected\n"); 3571 port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; 3572 } 3573 3574 if (!hsotg->flags.b.port_connect_status) { 3575 /* 3576 * The port is disconnected, which means the core is 3577 * either in device mode or it soon will be. Just 3578 * return 0's for the remainder of the port status 3579 * since the port register can't be read if the core 3580 * is in device mode. 3581 */ 3582 *(__le32 *)buf = cpu_to_le32(port_status); 3583 break; 3584 } 3585 3586 hprt0 = dwc2_readl(hsotg, HPRT0); 3587 dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); 3588 3589 if (hprt0 & HPRT0_CONNSTS) 3590 port_status |= USB_PORT_STAT_CONNECTION; 3591 if (hprt0 & HPRT0_ENA) 3592 port_status |= USB_PORT_STAT_ENABLE; 3593 if (hprt0 & HPRT0_SUSP) 3594 port_status |= USB_PORT_STAT_SUSPEND; 3595 if (hprt0 & HPRT0_OVRCURRACT) 3596 port_status |= USB_PORT_STAT_OVERCURRENT; 3597 if (hprt0 & HPRT0_RST) 3598 port_status |= USB_PORT_STAT_RESET; 3599 if (hprt0 & HPRT0_PWR) 3600 port_status |= USB_PORT_STAT_POWER; 3601 3602 speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 3603 if (speed == HPRT0_SPD_HIGH_SPEED) 3604 port_status |= USB_PORT_STAT_HIGH_SPEED; 3605 else if (speed == HPRT0_SPD_LOW_SPEED) 3606 port_status |= USB_PORT_STAT_LOW_SPEED; 3607 3608 if (hprt0 & HPRT0_TSTCTL_MASK) 3609 port_status |= USB_PORT_STAT_TEST; 3610 /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ 3611 3612 if (hsotg->params.dma_desc_fs_enable) { 3613 /* 3614 * Enable descriptor DMA only if a full speed 3615 * device is connected. 3616 */ 3617 if (hsotg->new_connection && 3618 ((port_status & 3619 (USB_PORT_STAT_CONNECTION | 3620 USB_PORT_STAT_HIGH_SPEED | 3621 USB_PORT_STAT_LOW_SPEED)) == 3622 USB_PORT_STAT_CONNECTION)) { 3623 u32 hcfg; 3624 3625 dev_info(hsotg->dev, "Enabling descriptor DMA mode\n"); 3626 hsotg->params.dma_desc_enable = true; 3627 hcfg = dwc2_readl(hsotg, HCFG); 3628 hcfg |= HCFG_DESCDMA; 3629 dwc2_writel(hsotg, hcfg, HCFG); 3630 hsotg->new_connection = false; 3631 } 3632 } 3633 3634 dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); 3635 *(__le32 *)buf = cpu_to_le32(port_status); 3636 break; 3637 3638 case SetHubFeature: 3639 dev_dbg(hsotg->dev, "SetHubFeature\n"); 3640 /* No HUB features supported */ 3641 break; 3642 3643 case SetPortFeature: 3644 dev_dbg(hsotg->dev, "SetPortFeature\n"); 3645 if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) 3646 goto error; 3647 3648 if (!hsotg->flags.b.port_connect_status) { 3649 /* 3650 * The port is disconnected, which means the core is 3651 * either in device mode or it soon will be. Just 3652 * return without doing anything since the port 3653 * register can't be written if the core is in device 3654 * mode. 3655 */ 3656 break; 3657 } 3658 3659 switch (wvalue) { 3660 case USB_PORT_FEAT_SUSPEND: 3661 dev_dbg(hsotg->dev, 3662 "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); 3663 if (windex != hsotg->otg_port) 3664 goto error; 3665 if (!hsotg->bus_suspended) 3666 retval = dwc2_port_suspend(hsotg, windex); 3667 break; 3668 3669 case USB_PORT_FEAT_POWER: 3670 dev_dbg(hsotg->dev, 3671 "SetPortFeature - USB_PORT_FEAT_POWER\n"); 3672 hprt0 = dwc2_read_hprt0(hsotg); 3673 pwr = hprt0 & HPRT0_PWR; 3674 hprt0 |= HPRT0_PWR; 3675 dwc2_writel(hsotg, hprt0, HPRT0); 3676 if (!pwr) 3677 dwc2_vbus_supply_init(hsotg); 3678 break; 3679 3680 case USB_PORT_FEAT_RESET: 3681 dev_dbg(hsotg->dev, 3682 "SetPortFeature - USB_PORT_FEAT_RESET\n"); 3683 3684 hprt0 = dwc2_read_hprt0(hsotg); 3685 3686 if (hsotg->hibernated) { 3687 retval = dwc2_exit_hibernation(hsotg, 0, 1, 1); 3688 if (retval) 3689 dev_err(hsotg->dev, 3690 "exit hibernation failed\n"); 3691 } 3692 3693 if (hsotg->in_ppd) { 3694 retval = dwc2_exit_partial_power_down(hsotg, 1, 3695 true); 3696 if (retval) 3697 dev_err(hsotg->dev, 3698 "exit partial_power_down failed\n"); 3699 } 3700 3701 if (hsotg->params.power_down == 3702 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) 3703 dwc2_host_exit_clock_gating(hsotg, 0); 3704 3705 pcgctl = dwc2_readl(hsotg, PCGCTL); 3706 pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); 3707 dwc2_writel(hsotg, pcgctl, PCGCTL); 3708 /* ??? Original driver does this */ 3709 dwc2_writel(hsotg, 0, PCGCTL); 3710 3711 hprt0 = dwc2_read_hprt0(hsotg); 3712 pwr = hprt0 & HPRT0_PWR; 3713 /* Clear suspend bit if resetting from suspend state */ 3714 hprt0 &= ~HPRT0_SUSP; 3715 3716 /* 3717 * When B-Host the Port reset bit is set in the Start 3718 * HCD Callback function, so that the reset is started 3719 * within 1ms of the HNP success interrupt 3720 */ 3721 if (!dwc2_hcd_is_b_host(hsotg)) { 3722 hprt0 |= HPRT0_PWR | HPRT0_RST; 3723 dev_dbg(hsotg->dev, 3724 "In host mode, hprt0=%08x\n", hprt0); 3725 dwc2_writel(hsotg, hprt0, HPRT0); 3726 if (!pwr) 3727 dwc2_vbus_supply_init(hsotg); 3728 } 3729 3730 /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ 3731 msleep(50); 3732 hprt0 &= ~HPRT0_RST; 3733 dwc2_writel(hsotg, hprt0, HPRT0); 3734 hsotg->lx_state = DWC2_L0; /* Now back to On state */ 3735 break; 3736 3737 case USB_PORT_FEAT_INDICATOR: 3738 dev_dbg(hsotg->dev, 3739 "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); 3740 /* Not supported */ 3741 break; 3742 3743 case USB_PORT_FEAT_TEST: 3744 hprt0 = dwc2_read_hprt0(hsotg); 3745 dev_dbg(hsotg->dev, 3746 "SetPortFeature - USB_PORT_FEAT_TEST\n"); 3747 hprt0 &= ~HPRT0_TSTCTL_MASK; 3748 hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT; 3749 dwc2_writel(hsotg, hprt0, HPRT0); 3750 break; 3751 3752 default: 3753 retval = -EINVAL; 3754 dev_err(hsotg->dev, 3755 "SetPortFeature %1xh unknown or unsupported\n", 3756 wvalue); 3757 break; 3758 } 3759 break; 3760 3761 default: 3762 error: 3763 retval = -EINVAL; 3764 dev_dbg(hsotg->dev, 3765 "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", 3766 typereq, windex, wvalue); 3767 break; 3768 } 3769 3770 return retval; 3771 } 3772 3773 static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) 3774 { 3775 int retval; 3776 3777 if (port != 1) 3778 return -EINVAL; 3779 3780 retval = (hsotg->flags.b.port_connect_status_change || 3781 hsotg->flags.b.port_reset_change || 3782 hsotg->flags.b.port_enable_change || 3783 hsotg->flags.b.port_suspend_change || 3784 hsotg->flags.b.port_over_current_change); 3785 3786 if (retval) { 3787 dev_dbg(hsotg->dev, 3788 "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); 3789 dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", 3790 hsotg->flags.b.port_connect_status_change); 3791 dev_dbg(hsotg->dev, " port_reset_change: %d\n", 3792 hsotg->flags.b.port_reset_change); 3793 dev_dbg(hsotg->dev, " port_enable_change: %d\n", 3794 hsotg->flags.b.port_enable_change); 3795 dev_dbg(hsotg->dev, " port_suspend_change: %d\n", 3796 hsotg->flags.b.port_suspend_change); 3797 dev_dbg(hsotg->dev, " port_over_current_change: %d\n", 3798 hsotg->flags.b.port_over_current_change); 3799 } 3800 3801 return retval; 3802 } 3803 3804 int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) 3805 { 3806 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3807 3808 #ifdef DWC2_DEBUG_SOF 3809 dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", 3810 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); 3811 #endif 3812 return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3813 } 3814 3815 int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us) 3816 { 3817 u32 hprt = dwc2_readl(hsotg, HPRT0); 3818 u32 hfir = dwc2_readl(hsotg, HFIR); 3819 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3820 unsigned int us_per_frame; 3821 unsigned int frame_number; 3822 unsigned int remaining; 3823 unsigned int interval; 3824 unsigned int phy_clks; 3825 3826 /* High speed has 125 us per (micro) frame; others are 1 ms per */ 3827 us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125; 3828 3829 /* Extract fields */ 3830 frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3831 remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT; 3832 interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT; 3833 3834 /* 3835 * Number of phy clocks since the last tick of the frame number after 3836 * "us" has passed. 3837 */ 3838 phy_clks = (interval - remaining) + 3839 DIV_ROUND_UP(interval * us, us_per_frame); 3840 3841 return dwc2_frame_num_inc(frame_number, phy_clks / interval); 3842 } 3843 3844 int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) 3845 { 3846 return hsotg->op_state == OTG_STATE_B_HOST; 3847 } 3848 3849 static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, 3850 int iso_desc_count, 3851 gfp_t mem_flags) 3852 { 3853 struct dwc2_hcd_urb *urb; 3854 3855 urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags); 3856 if (urb) 3857 urb->packet_count = iso_desc_count; 3858 return urb; 3859 } 3860 3861 static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, 3862 struct dwc2_hcd_urb *urb, u8 dev_addr, 3863 u8 ep_num, u8 ep_type, u8 ep_dir, 3864 u16 maxp, u16 maxp_mult) 3865 { 3866 if (dbg_perio() || 3867 ep_type == USB_ENDPOINT_XFER_BULK || 3868 ep_type == USB_ENDPOINT_XFER_CONTROL) 3869 dev_vdbg(hsotg->dev, 3870 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n", 3871 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult); 3872 urb->pipe_info.dev_addr = dev_addr; 3873 urb->pipe_info.ep_num = ep_num; 3874 urb->pipe_info.pipe_type = ep_type; 3875 urb->pipe_info.pipe_dir = ep_dir; 3876 urb->pipe_info.maxp = maxp; 3877 urb->pipe_info.maxp_mult = maxp_mult; 3878 } 3879 3880 /* 3881 * NOTE: This function will be removed once the peripheral controller code 3882 * is integrated and the driver is stable 3883 */ 3884 void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) 3885 { 3886 #ifdef DEBUG 3887 struct dwc2_host_chan *chan; 3888 struct dwc2_hcd_urb *urb; 3889 struct dwc2_qtd *qtd; 3890 int num_channels; 3891 u32 np_tx_status; 3892 u32 p_tx_status; 3893 int i; 3894 3895 num_channels = hsotg->params.host_channels; 3896 dev_dbg(hsotg->dev, "\n"); 3897 dev_dbg(hsotg->dev, 3898 "************************************************************\n"); 3899 dev_dbg(hsotg->dev, "HCD State:\n"); 3900 dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); 3901 3902 for (i = 0; i < num_channels; i++) { 3903 chan = hsotg->hc_ptr_array[i]; 3904 dev_dbg(hsotg->dev, " Channel %d:\n", i); 3905 dev_dbg(hsotg->dev, 3906 " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 3907 chan->dev_addr, chan->ep_num, chan->ep_is_in); 3908 dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); 3909 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 3910 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 3911 dev_dbg(hsotg->dev, " data_pid_start: %d\n", 3912 chan->data_pid_start); 3913 dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); 3914 dev_dbg(hsotg->dev, " xfer_started: %d\n", 3915 chan->xfer_started); 3916 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 3917 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 3918 (unsigned long)chan->xfer_dma); 3919 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 3920 dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); 3921 dev_dbg(hsotg->dev, " halt_on_queue: %d\n", 3922 chan->halt_on_queue); 3923 dev_dbg(hsotg->dev, " halt_pending: %d\n", 3924 chan->halt_pending); 3925 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 3926 dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); 3927 dev_dbg(hsotg->dev, " complete_split: %d\n", 3928 chan->complete_split); 3929 dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); 3930 dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); 3931 dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); 3932 dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); 3933 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 3934 3935 if (chan->xfer_started) { 3936 u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; 3937 3938 hfnum = dwc2_readl(hsotg, HFNUM); 3939 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 3940 hctsiz = dwc2_readl(hsotg, HCTSIZ(i)); 3941 hcint = dwc2_readl(hsotg, HCINT(i)); 3942 hcintmsk = dwc2_readl(hsotg, HCINTMSK(i)); 3943 dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); 3944 dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); 3945 dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); 3946 dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); 3947 dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); 3948 } 3949 3950 if (!(chan->xfer_started && chan->qh)) 3951 continue; 3952 3953 list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { 3954 if (!qtd->in_process) 3955 break; 3956 urb = qtd->urb; 3957 dev_dbg(hsotg->dev, " URB Info:\n"); 3958 dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", 3959 qtd, urb); 3960 if (urb) { 3961 dev_dbg(hsotg->dev, 3962 " Dev: %d, EP: %d %s\n", 3963 dwc2_hcd_get_dev_addr(&urb->pipe_info), 3964 dwc2_hcd_get_ep_num(&urb->pipe_info), 3965 dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 3966 "IN" : "OUT"); 3967 dev_dbg(hsotg->dev, 3968 " Max packet size: %d (%d mult)\n", 3969 dwc2_hcd_get_maxp(&urb->pipe_info), 3970 dwc2_hcd_get_maxp_mult(&urb->pipe_info)); 3971 dev_dbg(hsotg->dev, 3972 " transfer_buffer: %p\n", 3973 urb->buf); 3974 dev_dbg(hsotg->dev, 3975 " transfer_dma: %08lx\n", 3976 (unsigned long)urb->dma); 3977 dev_dbg(hsotg->dev, 3978 " transfer_buffer_length: %d\n", 3979 urb->length); 3980 dev_dbg(hsotg->dev, " actual_length: %d\n", 3981 urb->actual_length); 3982 } 3983 } 3984 } 3985 3986 dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", 3987 hsotg->non_periodic_channels); 3988 dev_dbg(hsotg->dev, " periodic_channels: %d\n", 3989 hsotg->periodic_channels); 3990 dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); 3991 np_tx_status = dwc2_readl(hsotg, GNPTXSTS); 3992 dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", 3993 (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3994 dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", 3995 (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3996 p_tx_status = dwc2_readl(hsotg, HPTXSTS); 3997 dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", 3998 (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3999 dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", 4000 (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 4001 dwc2_dump_global_registers(hsotg); 4002 dwc2_dump_host_registers(hsotg); 4003 dev_dbg(hsotg->dev, 4004 "************************************************************\n"); 4005 dev_dbg(hsotg->dev, "\n"); 4006 #endif 4007 } 4008 4009 struct wrapper_priv_data { 4010 struct dwc2_hsotg *hsotg; 4011 }; 4012 4013 /* Gets the dwc2_hsotg from a usb_hcd */ 4014 static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) 4015 { 4016 struct wrapper_priv_data *p; 4017 4018 p = (struct wrapper_priv_data *)&hcd->hcd_priv; 4019 return p->hsotg; 4020 } 4021 4022 /** 4023 * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context 4024 * 4025 * This will get the dwc2_tt structure (and ttport) associated with the given 4026 * context (which is really just a struct urb pointer). 4027 * 4028 * The first time this is called for a given TT we allocate memory for our 4029 * structure. When everyone is done and has called dwc2_host_put_tt_info() 4030 * then the refcount for the structure will go to 0 and we'll free it. 4031 * 4032 * @hsotg: The HCD state structure for the DWC OTG controller. 4033 * @context: The priv pointer from a struct dwc2_hcd_urb. 4034 * @mem_flags: Flags for allocating memory. 4035 * @ttport: We'll return this device's port number here. That's used to 4036 * reference into the bitmap if we're on a multi_tt hub. 4037 * 4038 * Return: a pointer to a struct dwc2_tt. Don't forget to call 4039 * dwc2_host_put_tt_info()! Returns NULL upon memory alloc failure. 4040 */ 4041 4042 struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context, 4043 gfp_t mem_flags, int *ttport) 4044 { 4045 struct urb *urb = context; 4046 struct dwc2_tt *dwc_tt = NULL; 4047 4048 if (urb->dev->tt) { 4049 *ttport = urb->dev->ttport; 4050 4051 dwc_tt = urb->dev->tt->hcpriv; 4052 if (!dwc_tt) { 4053 size_t bitmap_size; 4054 4055 /* 4056 * For single_tt we need one schedule. For multi_tt 4057 * we need one per port. 4058 */ 4059 bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP * 4060 sizeof(dwc_tt->periodic_bitmaps[0]); 4061 if (urb->dev->tt->multi) 4062 bitmap_size *= urb->dev->tt->hub->maxchild; 4063 4064 dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size, 4065 mem_flags); 4066 if (!dwc_tt) 4067 return NULL; 4068 4069 dwc_tt->usb_tt = urb->dev->tt; 4070 dwc_tt->usb_tt->hcpriv = dwc_tt; 4071 } 4072 4073 dwc_tt->refcount++; 4074 } 4075 4076 return dwc_tt; 4077 } 4078 4079 /** 4080 * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info() 4081 * 4082 * Frees resources allocated by dwc2_host_get_tt_info() if all current holders 4083 * of the structure are done. 4084 * 4085 * It's OK to call this with NULL. 4086 * 4087 * @hsotg: The HCD state structure for the DWC OTG controller. 4088 * @dwc_tt: The pointer returned by dwc2_host_get_tt_info. 4089 */ 4090 void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt) 4091 { 4092 /* Model kfree and make put of NULL a no-op */ 4093 if (!dwc_tt) 4094 return; 4095 4096 WARN_ON(dwc_tt->refcount < 1); 4097 4098 dwc_tt->refcount--; 4099 if (!dwc_tt->refcount) { 4100 dwc_tt->usb_tt->hcpriv = NULL; 4101 kfree(dwc_tt); 4102 } 4103 } 4104 4105 int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) 4106 { 4107 struct urb *urb = context; 4108 4109 return urb->dev->speed; 4110 } 4111 4112 static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4113 struct urb *urb) 4114 { 4115 struct usb_bus *bus = hcd_to_bus(hcd); 4116 4117 if (urb->interval) 4118 bus->bandwidth_allocated += bw / urb->interval; 4119 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4120 bus->bandwidth_isoc_reqs++; 4121 else 4122 bus->bandwidth_int_reqs++; 4123 } 4124 4125 static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4126 struct urb *urb) 4127 { 4128 struct usb_bus *bus = hcd_to_bus(hcd); 4129 4130 if (urb->interval) 4131 bus->bandwidth_allocated -= bw / urb->interval; 4132 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4133 bus->bandwidth_isoc_reqs--; 4134 else 4135 bus->bandwidth_int_reqs--; 4136 } 4137 4138 /* 4139 * Sets the final status of an URB and returns it to the upper layer. Any 4140 * required cleanup of the URB is performed. 4141 * 4142 * Must be called with interrupt disabled and spinlock held 4143 */ 4144 void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, 4145 int status) 4146 { 4147 struct urb *urb; 4148 int i; 4149 4150 if (!qtd) { 4151 dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); 4152 return; 4153 } 4154 4155 if (!qtd->urb) { 4156 dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); 4157 return; 4158 } 4159 4160 urb = qtd->urb->priv; 4161 if (!urb) { 4162 dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); 4163 return; 4164 } 4165 4166 urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); 4167 4168 if (dbg_urb(urb)) 4169 dev_vdbg(hsotg->dev, 4170 "%s: urb %p device %d ep %d-%s status %d actual %d\n", 4171 __func__, urb, usb_pipedevice(urb->pipe), 4172 usb_pipeendpoint(urb->pipe), 4173 usb_pipein(urb->pipe) ? "IN" : "OUT", status, 4174 urb->actual_length); 4175 4176 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4177 urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); 4178 for (i = 0; i < urb->number_of_packets; ++i) { 4179 urb->iso_frame_desc[i].actual_length = 4180 dwc2_hcd_urb_get_iso_desc_actual_length( 4181 qtd->urb, i); 4182 urb->iso_frame_desc[i].status = 4183 dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); 4184 } 4185 } 4186 4187 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { 4188 for (i = 0; i < urb->number_of_packets; i++) 4189 dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", 4190 i, urb->iso_frame_desc[i].status); 4191 } 4192 4193 urb->status = status; 4194 if (!status) { 4195 if ((urb->transfer_flags & URB_SHORT_NOT_OK) && 4196 urb->actual_length < urb->transfer_buffer_length) 4197 urb->status = -EREMOTEIO; 4198 } 4199 4200 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4201 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4202 struct usb_host_endpoint *ep = urb->ep; 4203 4204 if (ep) 4205 dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), 4206 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4207 urb); 4208 } 4209 4210 usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); 4211 urb->hcpriv = NULL; 4212 kfree(qtd->urb); 4213 qtd->urb = NULL; 4214 4215 usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); 4216 } 4217 4218 /* 4219 * Work queue function for starting the HCD when A-Cable is connected 4220 */ 4221 static void dwc2_hcd_start_func(struct work_struct *work) 4222 { 4223 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4224 start_work.work); 4225 4226 dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); 4227 dwc2_host_start(hsotg); 4228 } 4229 4230 /* 4231 * Reset work queue function 4232 */ 4233 static void dwc2_hcd_reset_func(struct work_struct *work) 4234 { 4235 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4236 reset_work.work); 4237 unsigned long flags; 4238 u32 hprt0; 4239 4240 dev_dbg(hsotg->dev, "USB RESET function called\n"); 4241 4242 spin_lock_irqsave(&hsotg->lock, flags); 4243 4244 hprt0 = dwc2_read_hprt0(hsotg); 4245 hprt0 &= ~HPRT0_RST; 4246 dwc2_writel(hsotg, hprt0, HPRT0); 4247 hsotg->flags.b.port_reset_change = 1; 4248 4249 spin_unlock_irqrestore(&hsotg->lock, flags); 4250 } 4251 4252 static void dwc2_hcd_phy_reset_func(struct work_struct *work) 4253 { 4254 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4255 phy_reset_work); 4256 int ret; 4257 4258 ret = phy_reset(hsotg->phy); 4259 if (ret) 4260 dev_warn(hsotg->dev, "PHY reset failed\n"); 4261 } 4262 4263 /* 4264 * ========================================================================= 4265 * Linux HC Driver Functions 4266 * ========================================================================= 4267 */ 4268 4269 /* 4270 * Initializes the DWC_otg controller and its root hub and prepares it for host 4271 * mode operation. Activates the root port. Returns 0 on success and a negative 4272 * error code on failure. 4273 */ 4274 static int _dwc2_hcd_start(struct usb_hcd *hcd) 4275 { 4276 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4277 struct usb_bus *bus = hcd_to_bus(hcd); 4278 unsigned long flags; 4279 u32 hprt0; 4280 int ret; 4281 4282 dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); 4283 4284 spin_lock_irqsave(&hsotg->lock, flags); 4285 hsotg->lx_state = DWC2_L0; 4286 hcd->state = HC_STATE_RUNNING; 4287 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4288 4289 if (dwc2_is_device_mode(hsotg)) { 4290 spin_unlock_irqrestore(&hsotg->lock, flags); 4291 return 0; /* why 0 ?? */ 4292 } 4293 4294 dwc2_hcd_reinit(hsotg); 4295 4296 hprt0 = dwc2_read_hprt0(hsotg); 4297 /* Has vbus power been turned on in dwc2_core_host_init ? */ 4298 if (hprt0 & HPRT0_PWR) { 4299 /* Enable external vbus supply before resuming root hub */ 4300 spin_unlock_irqrestore(&hsotg->lock, flags); 4301 ret = dwc2_vbus_supply_init(hsotg); 4302 if (ret) 4303 return ret; 4304 spin_lock_irqsave(&hsotg->lock, flags); 4305 } 4306 4307 /* Initialize and connect root hub if one is not already attached */ 4308 if (bus->root_hub) { 4309 dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); 4310 /* Inform the HUB driver to resume */ 4311 usb_hcd_resume_root_hub(hcd); 4312 } 4313 4314 spin_unlock_irqrestore(&hsotg->lock, flags); 4315 4316 return 0; 4317 } 4318 4319 /* 4320 * Halts the DWC_otg host mode operations in a clean manner. USB transfers are 4321 * stopped. 4322 */ 4323 static void _dwc2_hcd_stop(struct usb_hcd *hcd) 4324 { 4325 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4326 unsigned long flags; 4327 u32 hprt0; 4328 4329 /* Turn off all host-specific interrupts */ 4330 dwc2_disable_host_interrupts(hsotg); 4331 4332 /* Wait for interrupt processing to finish */ 4333 synchronize_irq(hcd->irq); 4334 4335 spin_lock_irqsave(&hsotg->lock, flags); 4336 hprt0 = dwc2_read_hprt0(hsotg); 4337 /* Ensure hcd is disconnected */ 4338 dwc2_hcd_disconnect(hsotg, true); 4339 dwc2_hcd_stop(hsotg); 4340 hsotg->lx_state = DWC2_L3; 4341 hcd->state = HC_STATE_HALT; 4342 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4343 spin_unlock_irqrestore(&hsotg->lock, flags); 4344 4345 /* keep balanced supply init/exit by checking HPRT0_PWR */ 4346 if (hprt0 & HPRT0_PWR) 4347 dwc2_vbus_supply_exit(hsotg); 4348 4349 usleep_range(1000, 3000); 4350 } 4351 4352 static int _dwc2_hcd_suspend(struct usb_hcd *hcd) 4353 { 4354 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4355 unsigned long flags; 4356 int ret = 0; 4357 4358 spin_lock_irqsave(&hsotg->lock, flags); 4359 4360 if (dwc2_is_device_mode(hsotg)) 4361 goto unlock; 4362 4363 if (hsotg->lx_state != DWC2_L0) 4364 goto unlock; 4365 4366 if (!HCD_HW_ACCESSIBLE(hcd)) 4367 goto unlock; 4368 4369 if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) 4370 goto unlock; 4371 4372 if (hsotg->bus_suspended) 4373 goto skip_power_saving; 4374 4375 if (hsotg->flags.b.port_connect_status == 0) 4376 goto skip_power_saving; 4377 4378 switch (hsotg->params.power_down) { 4379 case DWC2_POWER_DOWN_PARAM_PARTIAL: 4380 /* Enter partial_power_down */ 4381 ret = dwc2_enter_partial_power_down(hsotg); 4382 if (ret) 4383 dev_err(hsotg->dev, 4384 "enter partial_power_down failed\n"); 4385 /* After entering suspend, hardware is not accessible */ 4386 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4387 break; 4388 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 4389 case DWC2_POWER_DOWN_PARAM_NONE: 4390 /* 4391 * If not hibernation nor partial power down are supported, 4392 * clock gating is used to save power. 4393 */ 4394 dwc2_host_enter_clock_gating(hsotg); 4395 4396 /* After entering suspend, hardware is not accessible */ 4397 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4398 break; 4399 default: 4400 goto skip_power_saving; 4401 } 4402 4403 spin_unlock_irqrestore(&hsotg->lock, flags); 4404 dwc2_vbus_supply_exit(hsotg); 4405 spin_lock_irqsave(&hsotg->lock, flags); 4406 4407 /* Ask phy to be suspended */ 4408 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4409 spin_unlock_irqrestore(&hsotg->lock, flags); 4410 usb_phy_set_suspend(hsotg->uphy, true); 4411 spin_lock_irqsave(&hsotg->lock, flags); 4412 } 4413 4414 skip_power_saving: 4415 hsotg->lx_state = DWC2_L2; 4416 unlock: 4417 spin_unlock_irqrestore(&hsotg->lock, flags); 4418 4419 return ret; 4420 } 4421 4422 static int _dwc2_hcd_resume(struct usb_hcd *hcd) 4423 { 4424 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4425 unsigned long flags; 4426 u32 hprt0; 4427 int ret = 0; 4428 4429 spin_lock_irqsave(&hsotg->lock, flags); 4430 4431 if (dwc2_is_device_mode(hsotg)) 4432 goto unlock; 4433 4434 if (hsotg->lx_state != DWC2_L2) 4435 goto unlock; 4436 4437 hprt0 = dwc2_read_hprt0(hsotg); 4438 4439 /* 4440 * Added port connection status checking which prevents exiting from 4441 * Partial Power Down mode from _dwc2_hcd_resume() if not in Partial 4442 * Power Down mode. 4443 */ 4444 if (hprt0 & HPRT0_CONNSTS) { 4445 hsotg->lx_state = DWC2_L0; 4446 goto unlock; 4447 } 4448 4449 switch (hsotg->params.power_down) { 4450 case DWC2_POWER_DOWN_PARAM_PARTIAL: 4451 ret = dwc2_exit_partial_power_down(hsotg, 0, true); 4452 if (ret) 4453 dev_err(hsotg->dev, 4454 "exit partial_power_down failed\n"); 4455 /* 4456 * Set HW accessible bit before powering on the controller 4457 * since an interrupt may rise. 4458 */ 4459 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4460 break; 4461 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 4462 case DWC2_POWER_DOWN_PARAM_NONE: 4463 /* 4464 * If not hibernation nor partial power down are supported, 4465 * port resume is done using the clock gating programming flow. 4466 */ 4467 spin_unlock_irqrestore(&hsotg->lock, flags); 4468 dwc2_host_exit_clock_gating(hsotg, 0); 4469 4470 /* 4471 * Initialize the Core for Host mode, as after system resume 4472 * the global interrupts are disabled. 4473 */ 4474 dwc2_core_init(hsotg, false); 4475 dwc2_enable_global_interrupts(hsotg); 4476 dwc2_hcd_reinit(hsotg); 4477 spin_lock_irqsave(&hsotg->lock, flags); 4478 4479 /* 4480 * Set HW accessible bit before powering on the controller 4481 * since an interrupt may rise. 4482 */ 4483 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4484 break; 4485 default: 4486 hsotg->lx_state = DWC2_L0; 4487 goto unlock; 4488 } 4489 4490 /* Change Root port status, as port status change occurred after resume.*/ 4491 hsotg->flags.b.port_suspend_change = 1; 4492 4493 /* 4494 * Enable power if not already done. 4495 * This must not be spinlocked since duration 4496 * of this call is unknown. 4497 */ 4498 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4499 spin_unlock_irqrestore(&hsotg->lock, flags); 4500 usb_phy_set_suspend(hsotg->uphy, false); 4501 spin_lock_irqsave(&hsotg->lock, flags); 4502 } 4503 4504 /* Enable external vbus supply after resuming the port. */ 4505 spin_unlock_irqrestore(&hsotg->lock, flags); 4506 dwc2_vbus_supply_init(hsotg); 4507 4508 /* Wait for controller to correctly update D+/D- level */ 4509 usleep_range(3000, 5000); 4510 spin_lock_irqsave(&hsotg->lock, flags); 4511 4512 /* 4513 * Clear Port Enable and Port Status changes. 4514 * Enable Port Power. 4515 */ 4516 dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET | 4517 HPRT0_ENACHG, HPRT0); 4518 4519 /* Wait for controller to detect Port Connect */ 4520 spin_unlock_irqrestore(&hsotg->lock, flags); 4521 usleep_range(5000, 7000); 4522 spin_lock_irqsave(&hsotg->lock, flags); 4523 unlock: 4524 spin_unlock_irqrestore(&hsotg->lock, flags); 4525 4526 return ret; 4527 } 4528 4529 /* Returns the current frame number */ 4530 static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) 4531 { 4532 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4533 4534 return dwc2_hcd_get_frame_number(hsotg); 4535 } 4536 4537 static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, 4538 char *fn_name) 4539 { 4540 #ifdef VERBOSE_DEBUG 4541 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4542 char *pipetype = NULL; 4543 char *speed = NULL; 4544 4545 dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); 4546 dev_vdbg(hsotg->dev, " Device address: %d\n", 4547 usb_pipedevice(urb->pipe)); 4548 dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", 4549 usb_pipeendpoint(urb->pipe), 4550 usb_pipein(urb->pipe) ? "IN" : "OUT"); 4551 4552 switch (usb_pipetype(urb->pipe)) { 4553 case PIPE_CONTROL: 4554 pipetype = "CONTROL"; 4555 break; 4556 case PIPE_BULK: 4557 pipetype = "BULK"; 4558 break; 4559 case PIPE_INTERRUPT: 4560 pipetype = "INTERRUPT"; 4561 break; 4562 case PIPE_ISOCHRONOUS: 4563 pipetype = "ISOCHRONOUS"; 4564 break; 4565 } 4566 4567 dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, 4568 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? 4569 "IN" : "OUT"); 4570 4571 switch (urb->dev->speed) { 4572 case USB_SPEED_HIGH: 4573 speed = "HIGH"; 4574 break; 4575 case USB_SPEED_FULL: 4576 speed = "FULL"; 4577 break; 4578 case USB_SPEED_LOW: 4579 speed = "LOW"; 4580 break; 4581 default: 4582 speed = "UNKNOWN"; 4583 break; 4584 } 4585 4586 dev_vdbg(hsotg->dev, " Speed: %s\n", speed); 4587 dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n", 4588 usb_endpoint_maxp(&urb->ep->desc), 4589 usb_endpoint_maxp_mult(&urb->ep->desc)); 4590 4591 dev_vdbg(hsotg->dev, " Data buffer length: %d\n", 4592 urb->transfer_buffer_length); 4593 dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", 4594 urb->transfer_buffer, (unsigned long)urb->transfer_dma); 4595 dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", 4596 urb->setup_packet, (unsigned long)urb->setup_dma); 4597 dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); 4598 4599 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4600 int i; 4601 4602 for (i = 0; i < urb->number_of_packets; i++) { 4603 dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); 4604 dev_vdbg(hsotg->dev, " offset: %d, length %d\n", 4605 urb->iso_frame_desc[i].offset, 4606 urb->iso_frame_desc[i].length); 4607 } 4608 } 4609 #endif 4610 } 4611 4612 /* 4613 * Starts processing a USB transfer request specified by a USB Request Block 4614 * (URB). mem_flags indicates the type of memory allocation to use while 4615 * processing this URB. 4616 */ 4617 static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, 4618 gfp_t mem_flags) 4619 { 4620 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4621 struct usb_host_endpoint *ep = urb->ep; 4622 struct dwc2_hcd_urb *dwc2_urb; 4623 int i; 4624 int retval; 4625 int alloc_bandwidth = 0; 4626 u8 ep_type = 0; 4627 u32 tflags = 0; 4628 void *buf; 4629 unsigned long flags; 4630 struct dwc2_qh *qh; 4631 bool qh_allocated = false; 4632 struct dwc2_qtd *qtd; 4633 4634 if (dbg_urb(urb)) { 4635 dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); 4636 dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); 4637 } 4638 4639 if (hsotg->in_ppd) { 4640 retval = dwc2_exit_partial_power_down(hsotg, 0, true); 4641 if (retval) 4642 dev_err(hsotg->dev, 4643 "exit partial_power_down failed\n"); 4644 } 4645 4646 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && 4647 hsotg->bus_suspended) { 4648 if (dwc2_is_device_mode(hsotg)) 4649 dwc2_gadget_exit_clock_gating(hsotg, 0); 4650 else 4651 dwc2_host_exit_clock_gating(hsotg, 0); 4652 } 4653 4654 if (!ep) 4655 return -EINVAL; 4656 4657 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4658 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4659 spin_lock_irqsave(&hsotg->lock, flags); 4660 if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) 4661 alloc_bandwidth = 1; 4662 spin_unlock_irqrestore(&hsotg->lock, flags); 4663 } 4664 4665 switch (usb_pipetype(urb->pipe)) { 4666 case PIPE_CONTROL: 4667 ep_type = USB_ENDPOINT_XFER_CONTROL; 4668 break; 4669 case PIPE_ISOCHRONOUS: 4670 ep_type = USB_ENDPOINT_XFER_ISOC; 4671 break; 4672 case PIPE_BULK: 4673 ep_type = USB_ENDPOINT_XFER_BULK; 4674 break; 4675 case PIPE_INTERRUPT: 4676 ep_type = USB_ENDPOINT_XFER_INT; 4677 break; 4678 } 4679 4680 dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, 4681 mem_flags); 4682 if (!dwc2_urb) 4683 return -ENOMEM; 4684 4685 dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), 4686 usb_pipeendpoint(urb->pipe), ep_type, 4687 usb_pipein(urb->pipe), 4688 usb_endpoint_maxp(&ep->desc), 4689 usb_endpoint_maxp_mult(&ep->desc)); 4690 4691 buf = urb->transfer_buffer; 4692 4693 if (hcd_uses_dma(hcd)) { 4694 if (!buf && (urb->transfer_dma & 3)) { 4695 dev_err(hsotg->dev, 4696 "%s: unaligned transfer with no transfer_buffer", 4697 __func__); 4698 retval = -EINVAL; 4699 goto fail0; 4700 } 4701 } 4702 4703 if (!(urb->transfer_flags & URB_NO_INTERRUPT)) 4704 tflags |= URB_GIVEBACK_ASAP; 4705 if (urb->transfer_flags & URB_ZERO_PACKET) 4706 tflags |= URB_SEND_ZERO_PACKET; 4707 4708 dwc2_urb->priv = urb; 4709 dwc2_urb->buf = buf; 4710 dwc2_urb->dma = urb->transfer_dma; 4711 dwc2_urb->length = urb->transfer_buffer_length; 4712 dwc2_urb->setup_packet = urb->setup_packet; 4713 dwc2_urb->setup_dma = urb->setup_dma; 4714 dwc2_urb->flags = tflags; 4715 dwc2_urb->interval = urb->interval; 4716 dwc2_urb->status = -EINPROGRESS; 4717 4718 for (i = 0; i < urb->number_of_packets; ++i) 4719 dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, 4720 urb->iso_frame_desc[i].offset, 4721 urb->iso_frame_desc[i].length); 4722 4723 urb->hcpriv = dwc2_urb; 4724 qh = (struct dwc2_qh *)ep->hcpriv; 4725 /* Create QH for the endpoint if it doesn't exist */ 4726 if (!qh) { 4727 qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags); 4728 if (!qh) { 4729 retval = -ENOMEM; 4730 goto fail0; 4731 } 4732 ep->hcpriv = qh; 4733 qh_allocated = true; 4734 } 4735 4736 qtd = kzalloc(sizeof(*qtd), mem_flags); 4737 if (!qtd) { 4738 retval = -ENOMEM; 4739 goto fail1; 4740 } 4741 4742 spin_lock_irqsave(&hsotg->lock, flags); 4743 retval = usb_hcd_link_urb_to_ep(hcd, urb); 4744 if (retval) 4745 goto fail2; 4746 4747 retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd); 4748 if (retval) 4749 goto fail3; 4750 4751 if (alloc_bandwidth) { 4752 dwc2_allocate_bus_bandwidth(hcd, 4753 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4754 urb); 4755 } 4756 4757 spin_unlock_irqrestore(&hsotg->lock, flags); 4758 4759 return 0; 4760 4761 fail3: 4762 dwc2_urb->priv = NULL; 4763 usb_hcd_unlink_urb_from_ep(hcd, urb); 4764 if (qh_allocated && qh->channel && qh->channel->qh == qh) 4765 qh->channel->qh = NULL; 4766 fail2: 4767 spin_unlock_irqrestore(&hsotg->lock, flags); 4768 urb->hcpriv = NULL; 4769 kfree(qtd); 4770 fail1: 4771 if (qh_allocated) { 4772 struct dwc2_qtd *qtd2, *qtd2_tmp; 4773 4774 ep->hcpriv = NULL; 4775 dwc2_hcd_qh_unlink(hsotg, qh); 4776 /* Free each QTD in the QH's QTD list */ 4777 list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list, 4778 qtd_list_entry) 4779 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh); 4780 dwc2_hcd_qh_free(hsotg, qh); 4781 } 4782 fail0: 4783 kfree(dwc2_urb); 4784 4785 return retval; 4786 } 4787 4788 /* 4789 * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. 4790 */ 4791 static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, 4792 int status) 4793 { 4794 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4795 int rc; 4796 unsigned long flags; 4797 4798 dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); 4799 dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); 4800 4801 spin_lock_irqsave(&hsotg->lock, flags); 4802 4803 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 4804 if (rc) 4805 goto out; 4806 4807 if (!urb->hcpriv) { 4808 dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); 4809 goto out; 4810 } 4811 4812 rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); 4813 4814 usb_hcd_unlink_urb_from_ep(hcd, urb); 4815 4816 kfree(urb->hcpriv); 4817 urb->hcpriv = NULL; 4818 4819 /* Higher layer software sets URB status */ 4820 spin_unlock(&hsotg->lock); 4821 usb_hcd_giveback_urb(hcd, urb, status); 4822 spin_lock(&hsotg->lock); 4823 4824 dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); 4825 dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); 4826 out: 4827 spin_unlock_irqrestore(&hsotg->lock, flags); 4828 4829 return rc; 4830 } 4831 4832 /* 4833 * Frees resources in the DWC_otg controller related to a given endpoint. Also 4834 * clears state in the HCD related to the endpoint. Any URBs for the endpoint 4835 * must already be dequeued. 4836 */ 4837 static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, 4838 struct usb_host_endpoint *ep) 4839 { 4840 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4841 4842 dev_dbg(hsotg->dev, 4843 "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", 4844 ep->desc.bEndpointAddress, ep->hcpriv); 4845 dwc2_hcd_endpoint_disable(hsotg, ep, 250); 4846 } 4847 4848 /* 4849 * Resets endpoint specific parameter values, in current version used to reset 4850 * the data toggle (as a WA). This function can be called from usb_clear_halt 4851 * routine. 4852 */ 4853 static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, 4854 struct usb_host_endpoint *ep) 4855 { 4856 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4857 unsigned long flags; 4858 4859 dev_dbg(hsotg->dev, 4860 "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", 4861 ep->desc.bEndpointAddress); 4862 4863 spin_lock_irqsave(&hsotg->lock, flags); 4864 dwc2_hcd_endpoint_reset(hsotg, ep); 4865 spin_unlock_irqrestore(&hsotg->lock, flags); 4866 } 4867 4868 /* 4869 * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if 4870 * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid 4871 * interrupt. 4872 * 4873 * This function is called by the USB core when an interrupt occurs 4874 */ 4875 static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) 4876 { 4877 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4878 4879 return dwc2_handle_hcd_intr(hsotg); 4880 } 4881 4882 /* 4883 * Creates Status Change bitmap for the root hub and root port. The bitmap is 4884 * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 4885 * is the status change indicator for the single root port. Returns 1 if either 4886 * change indicator is 1, otherwise returns 0. 4887 */ 4888 static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) 4889 { 4890 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4891 4892 buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; 4893 return buf[0] != 0; 4894 } 4895 4896 /* Handles hub class-specific requests */ 4897 static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, 4898 u16 windex, char *buf, u16 wlength) 4899 { 4900 int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, 4901 wvalue, windex, buf, wlength); 4902 return retval; 4903 } 4904 4905 /* Handles hub TT buffer clear completions */ 4906 static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, 4907 struct usb_host_endpoint *ep) 4908 { 4909 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4910 struct dwc2_qh *qh; 4911 unsigned long flags; 4912 4913 qh = ep->hcpriv; 4914 if (!qh) 4915 return; 4916 4917 spin_lock_irqsave(&hsotg->lock, flags); 4918 qh->tt_buffer_dirty = 0; 4919 4920 if (hsotg->flags.b.port_connect_status) 4921 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); 4922 4923 spin_unlock_irqrestore(&hsotg->lock, flags); 4924 } 4925 4926 /* 4927 * HPRT0_SPD_HIGH_SPEED: high speed 4928 * HPRT0_SPD_FULL_SPEED: full speed 4929 */ 4930 static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed) 4931 { 4932 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4933 4934 if (hsotg->params.speed == speed) 4935 return; 4936 4937 hsotg->params.speed = speed; 4938 queue_work(hsotg->wq_otg, &hsotg->wf_otg); 4939 } 4940 4941 static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev) 4942 { 4943 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4944 4945 if (!hsotg->params.change_speed_quirk) 4946 return; 4947 4948 /* 4949 * On removal, set speed to default high-speed. 4950 */ 4951 if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN && 4952 udev->parent->speed < USB_SPEED_HIGH) { 4953 dev_info(hsotg->dev, "Set speed to default high-speed\n"); 4954 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4955 } 4956 } 4957 4958 static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev) 4959 { 4960 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4961 4962 if (!hsotg->params.change_speed_quirk) 4963 return 0; 4964 4965 if (udev->speed == USB_SPEED_HIGH) { 4966 dev_info(hsotg->dev, "Set speed to high-speed\n"); 4967 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4968 } else if ((udev->speed == USB_SPEED_FULL || 4969 udev->speed == USB_SPEED_LOW)) { 4970 /* 4971 * Change speed setting to full-speed if there's 4972 * a full-speed or low-speed device plugged in. 4973 */ 4974 dev_info(hsotg->dev, "Set speed to full-speed\n"); 4975 dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED); 4976 } 4977 4978 return 0; 4979 } 4980 4981 static struct hc_driver dwc2_hc_driver = { 4982 .description = "dwc2_hsotg", 4983 .product_desc = "DWC OTG Controller", 4984 .hcd_priv_size = sizeof(struct wrapper_priv_data), 4985 4986 .irq = _dwc2_hcd_irq, 4987 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, 4988 4989 .start = _dwc2_hcd_start, 4990 .stop = _dwc2_hcd_stop, 4991 .urb_enqueue = _dwc2_hcd_urb_enqueue, 4992 .urb_dequeue = _dwc2_hcd_urb_dequeue, 4993 .endpoint_disable = _dwc2_hcd_endpoint_disable, 4994 .endpoint_reset = _dwc2_hcd_endpoint_reset, 4995 .get_frame_number = _dwc2_hcd_get_frame_number, 4996 4997 .hub_status_data = _dwc2_hcd_hub_status_data, 4998 .hub_control = _dwc2_hcd_hub_control, 4999 .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, 5000 5001 .bus_suspend = _dwc2_hcd_suspend, 5002 .bus_resume = _dwc2_hcd_resume, 5003 5004 .map_urb_for_dma = dwc2_map_urb_for_dma, 5005 .unmap_urb_for_dma = dwc2_unmap_urb_for_dma, 5006 }; 5007 5008 /* 5009 * Frees secondary storage associated with the dwc2_hsotg structure contained 5010 * in the struct usb_hcd field 5011 */ 5012 static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) 5013 { 5014 u32 ahbcfg; 5015 u32 dctl; 5016 int i; 5017 5018 dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); 5019 5020 /* Free memory for QH/QTD lists */ 5021 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); 5022 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting); 5023 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); 5024 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); 5025 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); 5026 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); 5027 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); 5028 5029 /* Free memory for the host channels */ 5030 for (i = 0; i < MAX_EPS_CHANNELS; i++) { 5031 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 5032 5033 if (chan) { 5034 dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", 5035 i, chan); 5036 hsotg->hc_ptr_array[i] = NULL; 5037 kfree(chan); 5038 } 5039 } 5040 5041 if (hsotg->params.host_dma) { 5042 if (hsotg->status_buf) { 5043 dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, 5044 hsotg->status_buf, 5045 hsotg->status_buf_dma); 5046 hsotg->status_buf = NULL; 5047 } 5048 } else { 5049 kfree(hsotg->status_buf); 5050 hsotg->status_buf = NULL; 5051 } 5052 5053 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 5054 5055 /* Disable all interrupts */ 5056 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; 5057 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 5058 dwc2_writel(hsotg, 0, GINTMSK); 5059 5060 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { 5061 dctl = dwc2_readl(hsotg, DCTL); 5062 dctl |= DCTL_SFTDISCON; 5063 dwc2_writel(hsotg, dctl, DCTL); 5064 } 5065 5066 if (hsotg->wq_otg) { 5067 if (!cancel_work_sync(&hsotg->wf_otg)) 5068 flush_workqueue(hsotg->wq_otg); 5069 destroy_workqueue(hsotg->wq_otg); 5070 } 5071 5072 cancel_work_sync(&hsotg->phy_reset_work); 5073 5074 del_timer(&hsotg->wkp_timer); 5075 } 5076 5077 static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) 5078 { 5079 /* Turn off all host-specific interrupts */ 5080 dwc2_disable_host_interrupts(hsotg); 5081 5082 dwc2_hcd_free(hsotg); 5083 } 5084 5085 /* 5086 * Initializes the HCD. This function allocates memory for and initializes the 5087 * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the 5088 * USB bus with the core and calls the hc_driver->start() function. It returns 5089 * a negative error on failure. 5090 */ 5091 int dwc2_hcd_init(struct dwc2_hsotg *hsotg) 5092 { 5093 struct platform_device *pdev = to_platform_device(hsotg->dev); 5094 struct resource *res; 5095 struct usb_hcd *hcd; 5096 struct dwc2_host_chan *channel; 5097 u32 hcfg; 5098 int i, num_channels; 5099 int retval; 5100 5101 if (usb_disabled()) 5102 return -ENODEV; 5103 5104 dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); 5105 5106 retval = -ENOMEM; 5107 5108 hcfg = dwc2_readl(hsotg, HCFG); 5109 dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); 5110 5111 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5112 hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE, 5113 sizeof(*hsotg->frame_num_array), 5114 GFP_KERNEL); 5115 if (!hsotg->frame_num_array) 5116 goto error1; 5117 hsotg->last_frame_num_array = 5118 kcalloc(FRAME_NUM_ARRAY_SIZE, 5119 sizeof(*hsotg->last_frame_num_array), GFP_KERNEL); 5120 if (!hsotg->last_frame_num_array) 5121 goto error1; 5122 #endif 5123 hsotg->last_frame_num = HFNUM_MAX_FRNUM; 5124 5125 /* Check if the bus driver or platform code has setup a dma_mask */ 5126 if (hsotg->params.host_dma && 5127 !hsotg->dev->dma_mask) { 5128 dev_warn(hsotg->dev, 5129 "dma_mask not set, disabling DMA\n"); 5130 hsotg->params.host_dma = false; 5131 hsotg->params.dma_desc_enable = false; 5132 } 5133 5134 /* Set device flags indicating whether the HCD supports DMA */ 5135 if (hsotg->params.host_dma) { 5136 if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5137 dev_warn(hsotg->dev, "can't set DMA mask\n"); 5138 if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5139 dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); 5140 } 5141 5142 if (hsotg->params.change_speed_quirk) { 5143 dwc2_hc_driver.free_dev = dwc2_free_dev; 5144 dwc2_hc_driver.reset_device = dwc2_reset_device; 5145 } 5146 5147 if (hsotg->params.host_dma) 5148 dwc2_hc_driver.flags |= HCD_DMA; 5149 5150 hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); 5151 if (!hcd) 5152 goto error1; 5153 5154 hcd->has_tt = 1; 5155 5156 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 5157 hcd->rsrc_start = res->start; 5158 hcd->rsrc_len = resource_size(res); 5159 5160 ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg; 5161 hsotg->priv = hcd; 5162 5163 /* 5164 * Disable the global interrupt until all the interrupt handlers are 5165 * installed 5166 */ 5167 dwc2_disable_global_interrupts(hsotg); 5168 5169 /* Initialize the DWC_otg core, and select the Phy type */ 5170 retval = dwc2_core_init(hsotg, true); 5171 if (retval) 5172 goto error2; 5173 5174 /* Create new workqueue and init work */ 5175 retval = -ENOMEM; 5176 hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0); 5177 if (!hsotg->wq_otg) { 5178 dev_err(hsotg->dev, "Failed to create workqueue\n"); 5179 goto error2; 5180 } 5181 INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); 5182 5183 timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0); 5184 5185 /* Initialize the non-periodic schedule */ 5186 INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); 5187 INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting); 5188 INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); 5189 5190 /* Initialize the periodic schedule */ 5191 INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); 5192 INIT_LIST_HEAD(&hsotg->periodic_sched_ready); 5193 INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); 5194 INIT_LIST_HEAD(&hsotg->periodic_sched_queued); 5195 5196 INIT_LIST_HEAD(&hsotg->split_order); 5197 5198 /* 5199 * Create a host channel descriptor for each host channel implemented 5200 * in the controller. Initialize the channel descriptor array. 5201 */ 5202 INIT_LIST_HEAD(&hsotg->free_hc_list); 5203 num_channels = hsotg->params.host_channels; 5204 memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); 5205 5206 for (i = 0; i < num_channels; i++) { 5207 channel = kzalloc(sizeof(*channel), GFP_KERNEL); 5208 if (!channel) 5209 goto error3; 5210 channel->hc_num = i; 5211 INIT_LIST_HEAD(&channel->split_order_list_entry); 5212 hsotg->hc_ptr_array[i] = channel; 5213 } 5214 5215 /* Initialize work */ 5216 INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); 5217 INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); 5218 INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func); 5219 5220 /* 5221 * Allocate space for storing data on status transactions. Normally no 5222 * data is sent, but this space acts as a bit bucket. This must be 5223 * done after usb_add_hcd since that function allocates the DMA buffer 5224 * pool. 5225 */ 5226 if (hsotg->params.host_dma) 5227 hsotg->status_buf = dma_alloc_coherent(hsotg->dev, 5228 DWC2_HCD_STATUS_BUF_SIZE, 5229 &hsotg->status_buf_dma, GFP_KERNEL); 5230 else 5231 hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, 5232 GFP_KERNEL); 5233 5234 if (!hsotg->status_buf) 5235 goto error3; 5236 5237 /* 5238 * Create kmem caches to handle descriptor buffers in descriptor 5239 * DMA mode. 5240 * Alignment must be set to 512 bytes. 5241 */ 5242 if (hsotg->params.dma_desc_enable || 5243 hsotg->params.dma_desc_fs_enable) { 5244 hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc", 5245 sizeof(struct dwc2_dma_desc) * 5246 MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA, 5247 NULL); 5248 if (!hsotg->desc_gen_cache) { 5249 dev_err(hsotg->dev, 5250 "unable to create dwc2 generic desc cache\n"); 5251 5252 /* 5253 * Disable descriptor dma mode since it will not be 5254 * usable. 5255 */ 5256 hsotg->params.dma_desc_enable = false; 5257 hsotg->params.dma_desc_fs_enable = false; 5258 } 5259 5260 hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc", 5261 sizeof(struct dwc2_dma_desc) * 5262 MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL); 5263 if (!hsotg->desc_hsisoc_cache) { 5264 dev_err(hsotg->dev, 5265 "unable to create dwc2 hs isoc desc cache\n"); 5266 5267 kmem_cache_destroy(hsotg->desc_gen_cache); 5268 5269 /* 5270 * Disable descriptor dma mode since it will not be 5271 * usable. 5272 */ 5273 hsotg->params.dma_desc_enable = false; 5274 hsotg->params.dma_desc_fs_enable = false; 5275 } 5276 } 5277 5278 if (hsotg->params.host_dma) { 5279 /* 5280 * Create kmem caches to handle non-aligned buffer 5281 * in Buffer DMA mode. 5282 */ 5283 hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", 5284 DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, 5285 SLAB_CACHE_DMA, NULL); 5286 if (!hsotg->unaligned_cache) 5287 dev_err(hsotg->dev, 5288 "unable to create dwc2 unaligned cache\n"); 5289 } 5290 5291 hsotg->otg_port = 1; 5292 hsotg->frame_list = NULL; 5293 hsotg->frame_list_dma = 0; 5294 hsotg->periodic_qh_count = 0; 5295 5296 /* Initiate lx_state to L3 disconnected state */ 5297 hsotg->lx_state = DWC2_L3; 5298 5299 hcd->self.otg_port = hsotg->otg_port; 5300 5301 /* Don't support SG list at this point */ 5302 hcd->self.sg_tablesize = 0; 5303 5304 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5305 otg_set_host(hsotg->uphy->otg, &hcd->self); 5306 5307 /* 5308 * Finish generic HCD initialization and start the HCD. This function 5309 * allocates the DMA buffer pool, registers the USB bus, requests the 5310 * IRQ line, and calls hcd_start method. 5311 */ 5312 retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED); 5313 if (retval < 0) 5314 goto error4; 5315 5316 device_wakeup_enable(hcd->self.controller); 5317 5318 dwc2_hcd_dump_state(hsotg); 5319 5320 dwc2_enable_global_interrupts(hsotg); 5321 5322 return 0; 5323 5324 error4: 5325 kmem_cache_destroy(hsotg->unaligned_cache); 5326 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5327 kmem_cache_destroy(hsotg->desc_gen_cache); 5328 error3: 5329 dwc2_hcd_release(hsotg); 5330 error2: 5331 usb_put_hcd(hcd); 5332 error1: 5333 5334 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5335 kfree(hsotg->last_frame_num_array); 5336 kfree(hsotg->frame_num_array); 5337 #endif 5338 5339 dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); 5340 return retval; 5341 } 5342 5343 /* 5344 * Removes the HCD. 5345 * Frees memory and resources associated with the HCD and deregisters the bus. 5346 */ 5347 void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) 5348 { 5349 struct usb_hcd *hcd; 5350 5351 dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); 5352 5353 hcd = dwc2_hsotg_to_hcd(hsotg); 5354 dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); 5355 5356 if (!hcd) { 5357 dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", 5358 __func__); 5359 return; 5360 } 5361 5362 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5363 otg_set_host(hsotg->uphy->otg, NULL); 5364 5365 usb_remove_hcd(hcd); 5366 hsotg->priv = NULL; 5367 5368 kmem_cache_destroy(hsotg->unaligned_cache); 5369 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5370 kmem_cache_destroy(hsotg->desc_gen_cache); 5371 5372 dwc2_hcd_release(hsotg); 5373 usb_put_hcd(hcd); 5374 5375 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5376 kfree(hsotg->last_frame_num_array); 5377 kfree(hsotg->frame_num_array); 5378 #endif 5379 } 5380 5381 /** 5382 * dwc2_backup_host_registers() - Backup controller host registers. 5383 * When suspending usb bus, registers needs to be backuped 5384 * if controller power is disabled once suspended. 5385 * 5386 * @hsotg: Programming view of the DWC_otg controller 5387 */ 5388 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) 5389 { 5390 struct dwc2_hregs_backup *hr; 5391 int i; 5392 5393 dev_dbg(hsotg->dev, "%s\n", __func__); 5394 5395 /* Backup Host regs */ 5396 hr = &hsotg->hr_backup; 5397 hr->hcfg = dwc2_readl(hsotg, HCFG); 5398 hr->haintmsk = dwc2_readl(hsotg, HAINTMSK); 5399 for (i = 0; i < hsotg->params.host_channels; ++i) 5400 hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i)); 5401 5402 hr->hprt0 = dwc2_read_hprt0(hsotg); 5403 hr->hfir = dwc2_readl(hsotg, HFIR); 5404 hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); 5405 hr->valid = true; 5406 5407 return 0; 5408 } 5409 5410 /** 5411 * dwc2_restore_host_registers() - Restore controller host registers. 5412 * When resuming usb bus, device registers needs to be restored 5413 * if controller power were disabled. 5414 * 5415 * @hsotg: Programming view of the DWC_otg controller 5416 */ 5417 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) 5418 { 5419 struct dwc2_hregs_backup *hr; 5420 int i; 5421 5422 dev_dbg(hsotg->dev, "%s\n", __func__); 5423 5424 /* Restore host regs */ 5425 hr = &hsotg->hr_backup; 5426 if (!hr->valid) { 5427 dev_err(hsotg->dev, "%s: no host registers to restore\n", 5428 __func__); 5429 return -EINVAL; 5430 } 5431 hr->valid = false; 5432 5433 dwc2_writel(hsotg, hr->hcfg, HCFG); 5434 dwc2_writel(hsotg, hr->haintmsk, HAINTMSK); 5435 5436 for (i = 0; i < hsotg->params.host_channels; ++i) 5437 dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i)); 5438 5439 dwc2_writel(hsotg, hr->hprt0, HPRT0); 5440 dwc2_writel(hsotg, hr->hfir, HFIR); 5441 dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ); 5442 hsotg->frame_number = 0; 5443 5444 return 0; 5445 } 5446 5447 /** 5448 * dwc2_host_enter_hibernation() - Put controller in Hibernation. 5449 * 5450 * @hsotg: Programming view of the DWC_otg controller 5451 */ 5452 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) 5453 { 5454 unsigned long flags; 5455 int ret = 0; 5456 u32 hprt0; 5457 u32 pcgcctl; 5458 u32 gusbcfg; 5459 u32 gpwrdn; 5460 5461 dev_dbg(hsotg->dev, "Preparing host for hibernation\n"); 5462 ret = dwc2_backup_global_registers(hsotg); 5463 if (ret) { 5464 dev_err(hsotg->dev, "%s: failed to backup global registers\n", 5465 __func__); 5466 return ret; 5467 } 5468 ret = dwc2_backup_host_registers(hsotg); 5469 if (ret) { 5470 dev_err(hsotg->dev, "%s: failed to backup host registers\n", 5471 __func__); 5472 return ret; 5473 } 5474 5475 /* Enter USB Suspend Mode */ 5476 hprt0 = dwc2_readl(hsotg, HPRT0); 5477 hprt0 |= HPRT0_SUSP; 5478 hprt0 &= ~HPRT0_ENA; 5479 dwc2_writel(hsotg, hprt0, HPRT0); 5480 5481 /* Wait for the HPRT0.PrtSusp register field to be set */ 5482 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000)) 5483 dev_warn(hsotg->dev, "Suspend wasn't generated\n"); 5484 5485 /* 5486 * We need to disable interrupts to prevent servicing of any IRQ 5487 * during going to hibernation 5488 */ 5489 spin_lock_irqsave(&hsotg->lock, flags); 5490 hsotg->lx_state = DWC2_L2; 5491 5492 gusbcfg = dwc2_readl(hsotg, GUSBCFG); 5493 if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) { 5494 /* ULPI interface */ 5495 /* Suspend the Phy Clock */ 5496 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5497 pcgcctl |= PCGCTL_STOPPCLK; 5498 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5499 udelay(10); 5500 5501 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5502 gpwrdn |= GPWRDN_PMUACTV; 5503 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5504 udelay(10); 5505 } else { 5506 /* UTMI+ Interface */ 5507 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5508 gpwrdn |= GPWRDN_PMUACTV; 5509 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5510 udelay(10); 5511 5512 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5513 pcgcctl |= PCGCTL_STOPPCLK; 5514 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5515 udelay(10); 5516 } 5517 5518 /* Enable interrupts from wake up logic */ 5519 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5520 gpwrdn |= GPWRDN_PMUINTSEL; 5521 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5522 udelay(10); 5523 5524 /* Unmask host mode interrupts in GPWRDN */ 5525 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5526 gpwrdn |= GPWRDN_DISCONN_DET_MSK; 5527 gpwrdn |= GPWRDN_LNSTSCHG_MSK; 5528 gpwrdn |= GPWRDN_STS_CHGINT_MSK; 5529 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5530 udelay(10); 5531 5532 /* Enable Power Down Clamp */ 5533 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5534 gpwrdn |= GPWRDN_PWRDNCLMP; 5535 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5536 udelay(10); 5537 5538 /* Switch off VDD */ 5539 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5540 gpwrdn |= GPWRDN_PWRDNSWTCH; 5541 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5542 5543 hsotg->hibernated = 1; 5544 hsotg->bus_suspended = 1; 5545 dev_dbg(hsotg->dev, "Host hibernation completed\n"); 5546 spin_unlock_irqrestore(&hsotg->lock, flags); 5547 return ret; 5548 } 5549 5550 /* 5551 * dwc2_host_exit_hibernation() 5552 * 5553 * @hsotg: Programming view of the DWC_otg controller 5554 * @rem_wakeup: indicates whether resume is initiated by Device or Host. 5555 * @param reset: indicates whether resume is initiated by Reset. 5556 * 5557 * Return: non-zero if failed to enter to hibernation. 5558 * 5559 * This function is for exiting from Host mode hibernation by 5560 * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. 5561 */ 5562 int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, 5563 int reset) 5564 { 5565 u32 gpwrdn; 5566 u32 hprt0; 5567 int ret = 0; 5568 struct dwc2_gregs_backup *gr; 5569 struct dwc2_hregs_backup *hr; 5570 5571 gr = &hsotg->gr_backup; 5572 hr = &hsotg->hr_backup; 5573 5574 dev_dbg(hsotg->dev, 5575 "%s: called with rem_wakeup = %d reset = %d\n", 5576 __func__, rem_wakeup, reset); 5577 5578 dwc2_hib_restore_common(hsotg, rem_wakeup, 1); 5579 hsotg->hibernated = 0; 5580 5581 /* 5582 * This step is not described in functional spec but if not wait for 5583 * this delay, mismatch interrupts occurred because just after restore 5584 * core is in Device mode(gintsts.curmode == 0) 5585 */ 5586 mdelay(100); 5587 5588 /* Clear all pending interupts */ 5589 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5590 5591 /* De-assert Restore */ 5592 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5593 gpwrdn &= ~GPWRDN_RESTORE; 5594 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5595 udelay(10); 5596 5597 /* Restore GUSBCFG, HCFG */ 5598 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); 5599 dwc2_writel(hsotg, hr->hcfg, HCFG); 5600 5601 /* De-assert Wakeup Logic */ 5602 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5603 gpwrdn &= ~GPWRDN_PMUACTV; 5604 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5605 udelay(10); 5606 5607 hprt0 = hr->hprt0; 5608 hprt0 |= HPRT0_PWR; 5609 hprt0 &= ~HPRT0_ENA; 5610 hprt0 &= ~HPRT0_SUSP; 5611 dwc2_writel(hsotg, hprt0, HPRT0); 5612 5613 hprt0 = hr->hprt0; 5614 hprt0 |= HPRT0_PWR; 5615 hprt0 &= ~HPRT0_ENA; 5616 hprt0 &= ~HPRT0_SUSP; 5617 5618 if (reset) { 5619 hprt0 |= HPRT0_RST; 5620 dwc2_writel(hsotg, hprt0, HPRT0); 5621 5622 /* Wait for Resume time and then program HPRT again */ 5623 mdelay(60); 5624 hprt0 &= ~HPRT0_RST; 5625 dwc2_writel(hsotg, hprt0, HPRT0); 5626 } else { 5627 hprt0 |= HPRT0_RES; 5628 dwc2_writel(hsotg, hprt0, HPRT0); 5629 5630 /* Wait for Resume time and then program HPRT again */ 5631 mdelay(100); 5632 hprt0 &= ~HPRT0_RES; 5633 dwc2_writel(hsotg, hprt0, HPRT0); 5634 } 5635 /* Clear all interrupt status */ 5636 hprt0 = dwc2_readl(hsotg, HPRT0); 5637 hprt0 |= HPRT0_CONNDET; 5638 hprt0 |= HPRT0_ENACHG; 5639 hprt0 &= ~HPRT0_ENA; 5640 dwc2_writel(hsotg, hprt0, HPRT0); 5641 5642 hprt0 = dwc2_readl(hsotg, HPRT0); 5643 5644 /* Clear all pending interupts */ 5645 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5646 5647 /* Restore global registers */ 5648 ret = dwc2_restore_global_registers(hsotg); 5649 if (ret) { 5650 dev_err(hsotg->dev, "%s: failed to restore registers\n", 5651 __func__); 5652 return ret; 5653 } 5654 5655 /* Restore host registers */ 5656 ret = dwc2_restore_host_registers(hsotg); 5657 if (ret) { 5658 dev_err(hsotg->dev, "%s: failed to restore host registers\n", 5659 __func__); 5660 return ret; 5661 } 5662 5663 if (rem_wakeup) { 5664 dwc2_hcd_rem_wakeup(hsotg); 5665 /* 5666 * Change "port_connect_status_change" flag to re-enumerate, 5667 * because after exit from hibernation port connection status 5668 * is not detected. 5669 */ 5670 hsotg->flags.b.port_connect_status_change = 1; 5671 } 5672 5673 hsotg->hibernated = 0; 5674 hsotg->bus_suspended = 0; 5675 hsotg->lx_state = DWC2_L0; 5676 dev_dbg(hsotg->dev, "Host hibernation restore complete\n"); 5677 return ret; 5678 } 5679 5680 bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) 5681 { 5682 struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub; 5683 5684 /* If the controller isn't allowed to wakeup then we can power off. */ 5685 if (!device_may_wakeup(dwc2->dev)) 5686 return true; 5687 5688 /* 5689 * We don't want to power off the PHY if something under the 5690 * root hub has wakeup enabled. 5691 */ 5692 if (usb_wakeup_enabled_descendants(root_hub)) 5693 return false; 5694 5695 /* No reason to keep the PHY powered, so allow poweroff */ 5696 return true; 5697 } 5698 5699 /** 5700 * dwc2_host_enter_partial_power_down() - Put controller in partial 5701 * power down. 5702 * 5703 * @hsotg: Programming view of the DWC_otg controller 5704 * 5705 * Return: non-zero if failed to enter host partial power down. 5706 * 5707 * This function is for entering Host mode partial power down. 5708 */ 5709 int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg) 5710 { 5711 u32 pcgcctl; 5712 u32 hprt0; 5713 int ret = 0; 5714 5715 dev_dbg(hsotg->dev, "Entering host partial power down started.\n"); 5716 5717 /* Put this port in suspend mode. */ 5718 hprt0 = dwc2_read_hprt0(hsotg); 5719 hprt0 |= HPRT0_SUSP; 5720 dwc2_writel(hsotg, hprt0, HPRT0); 5721 udelay(5); 5722 5723 /* Wait for the HPRT0.PrtSusp register field to be set */ 5724 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) 5725 dev_warn(hsotg->dev, "Suspend wasn't generated\n"); 5726 5727 /* Backup all registers */ 5728 ret = dwc2_backup_global_registers(hsotg); 5729 if (ret) { 5730 dev_err(hsotg->dev, "%s: failed to backup global registers\n", 5731 __func__); 5732 return ret; 5733 } 5734 5735 ret = dwc2_backup_host_registers(hsotg); 5736 if (ret) { 5737 dev_err(hsotg->dev, "%s: failed to backup host registers\n", 5738 __func__); 5739 return ret; 5740 } 5741 5742 /* 5743 * Clear any pending interrupts since dwc2 will not be able to 5744 * clear them after entering partial_power_down. 5745 */ 5746 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5747 5748 /* Put the controller in low power state */ 5749 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5750 5751 pcgcctl |= PCGCTL_PWRCLMP; 5752 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5753 udelay(5); 5754 5755 pcgcctl |= PCGCTL_RSTPDWNMODULE; 5756 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5757 udelay(5); 5758 5759 pcgcctl |= PCGCTL_STOPPCLK; 5760 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5761 5762 /* Set in_ppd flag to 1 as here core enters suspend. */ 5763 hsotg->in_ppd = 1; 5764 hsotg->lx_state = DWC2_L2; 5765 hsotg->bus_suspended = true; 5766 5767 dev_dbg(hsotg->dev, "Entering host partial power down completed.\n"); 5768 5769 return ret; 5770 } 5771 5772 /* 5773 * dwc2_host_exit_partial_power_down() - Exit controller from host partial 5774 * power down. 5775 * 5776 * @hsotg: Programming view of the DWC_otg controller 5777 * @rem_wakeup: indicates whether resume is initiated by Reset. 5778 * @restore: indicates whether need to restore the registers or not. 5779 * 5780 * Return: non-zero if failed to exit host partial power down. 5781 * 5782 * This function is for exiting from Host mode partial power down. 5783 */ 5784 int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg, 5785 int rem_wakeup, bool restore) 5786 { 5787 u32 pcgcctl; 5788 int ret = 0; 5789 u32 hprt0; 5790 5791 dev_dbg(hsotg->dev, "Exiting host partial power down started.\n"); 5792 5793 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5794 pcgcctl &= ~PCGCTL_STOPPCLK; 5795 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5796 udelay(5); 5797 5798 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5799 pcgcctl &= ~PCGCTL_PWRCLMP; 5800 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5801 udelay(5); 5802 5803 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5804 pcgcctl &= ~PCGCTL_RSTPDWNMODULE; 5805 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5806 5807 udelay(100); 5808 if (restore) { 5809 ret = dwc2_restore_global_registers(hsotg); 5810 if (ret) { 5811 dev_err(hsotg->dev, "%s: failed to restore registers\n", 5812 __func__); 5813 return ret; 5814 } 5815 5816 ret = dwc2_restore_host_registers(hsotg); 5817 if (ret) { 5818 dev_err(hsotg->dev, "%s: failed to restore host registers\n", 5819 __func__); 5820 return ret; 5821 } 5822 } 5823 5824 /* Drive resume signaling and exit suspend mode on the port. */ 5825 hprt0 = dwc2_read_hprt0(hsotg); 5826 hprt0 |= HPRT0_RES; 5827 hprt0 &= ~HPRT0_SUSP; 5828 dwc2_writel(hsotg, hprt0, HPRT0); 5829 udelay(5); 5830 5831 if (!rem_wakeup) { 5832 /* Stop driveing resume signaling on the port. */ 5833 hprt0 = dwc2_read_hprt0(hsotg); 5834 hprt0 &= ~HPRT0_RES; 5835 dwc2_writel(hsotg, hprt0, HPRT0); 5836 5837 hsotg->bus_suspended = false; 5838 } else { 5839 /* Turn on the port power bit. */ 5840 hprt0 = dwc2_read_hprt0(hsotg); 5841 hprt0 |= HPRT0_PWR; 5842 dwc2_writel(hsotg, hprt0, HPRT0); 5843 5844 /* Connect hcd. */ 5845 dwc2_hcd_connect(hsotg); 5846 5847 mod_timer(&hsotg->wkp_timer, 5848 jiffies + msecs_to_jiffies(71)); 5849 } 5850 5851 /* Set lx_state to and in_ppd to 0 as here core exits from suspend. */ 5852 hsotg->in_ppd = 0; 5853 hsotg->lx_state = DWC2_L0; 5854 5855 dev_dbg(hsotg->dev, "Exiting host partial power down completed.\n"); 5856 return ret; 5857 } 5858 5859 /** 5860 * dwc2_host_enter_clock_gating() - Put controller in clock gating. 5861 * 5862 * @hsotg: Programming view of the DWC_otg controller 5863 * 5864 * This function is for entering Host mode clock gating. 5865 */ 5866 void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg) 5867 { 5868 u32 hprt0; 5869 u32 pcgctl; 5870 5871 dev_dbg(hsotg->dev, "Entering host clock gating.\n"); 5872 5873 /* Put this port in suspend mode. */ 5874 hprt0 = dwc2_read_hprt0(hsotg); 5875 hprt0 |= HPRT0_SUSP; 5876 dwc2_writel(hsotg, hprt0, HPRT0); 5877 5878 /* Set the Phy Clock bit as suspend is received. */ 5879 pcgctl = dwc2_readl(hsotg, PCGCTL); 5880 pcgctl |= PCGCTL_STOPPCLK; 5881 dwc2_writel(hsotg, pcgctl, PCGCTL); 5882 udelay(5); 5883 5884 /* Set the Gate hclk as suspend is received. */ 5885 pcgctl = dwc2_readl(hsotg, PCGCTL); 5886 pcgctl |= PCGCTL_GATEHCLK; 5887 dwc2_writel(hsotg, pcgctl, PCGCTL); 5888 udelay(5); 5889 5890 hsotg->bus_suspended = true; 5891 hsotg->lx_state = DWC2_L2; 5892 } 5893 5894 /** 5895 * dwc2_host_exit_clock_gating() - Exit controller from clock gating. 5896 * 5897 * @hsotg: Programming view of the DWC_otg controller 5898 * @rem_wakeup: indicates whether resume is initiated by remote wakeup 5899 * 5900 * This function is for exiting Host mode clock gating. 5901 */ 5902 void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup) 5903 { 5904 u32 hprt0; 5905 u32 pcgctl; 5906 5907 dev_dbg(hsotg->dev, "Exiting host clock gating.\n"); 5908 5909 /* Clear the Gate hclk. */ 5910 pcgctl = dwc2_readl(hsotg, PCGCTL); 5911 pcgctl &= ~PCGCTL_GATEHCLK; 5912 dwc2_writel(hsotg, pcgctl, PCGCTL); 5913 udelay(5); 5914 5915 /* Phy Clock bit. */ 5916 pcgctl = dwc2_readl(hsotg, PCGCTL); 5917 pcgctl &= ~PCGCTL_STOPPCLK; 5918 dwc2_writel(hsotg, pcgctl, PCGCTL); 5919 udelay(5); 5920 5921 /* Drive resume signaling and exit suspend mode on the port. */ 5922 hprt0 = dwc2_read_hprt0(hsotg); 5923 hprt0 |= HPRT0_RES; 5924 hprt0 &= ~HPRT0_SUSP; 5925 dwc2_writel(hsotg, hprt0, HPRT0); 5926 udelay(5); 5927 5928 if (!rem_wakeup) { 5929 /* In case of port resume need to wait for 40 ms */ 5930 msleep(USB_RESUME_TIMEOUT); 5931 5932 /* Stop driveing resume signaling on the port. */ 5933 hprt0 = dwc2_read_hprt0(hsotg); 5934 hprt0 &= ~HPRT0_RES; 5935 dwc2_writel(hsotg, hprt0, HPRT0); 5936 5937 hsotg->bus_suspended = false; 5938 hsotg->lx_state = DWC2_L0; 5939 } else { 5940 mod_timer(&hsotg->wkp_timer, 5941 jiffies + msecs_to_jiffies(71)); 5942 } 5943 } 5944