1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * core_intr.c - DesignWare HS OTG Controller common interrupt handling 4 * 5 * Copyright (C) 2004-2013 Synopsys, Inc. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The names of the above-listed copyright holders may not be used 17 * to endorse or promote products derived from this software without 18 * specific prior written permission. 19 * 20 * ALTERNATIVELY, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") as published by the Free Software 22 * Foundation; either version 2 of the License, or (at your option) any 23 * later version. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * This file contains the common interrupt handlers 40 */ 41 #include <linux/kernel.h> 42 #include <linux/module.h> 43 #include <linux/moduleparam.h> 44 #include <linux/spinlock.h> 45 #include <linux/interrupt.h> 46 #include <linux/dma-mapping.h> 47 #include <linux/io.h> 48 #include <linux/slab.h> 49 #include <linux/usb.h> 50 51 #include <linux/usb/hcd.h> 52 #include <linux/usb/ch11.h> 53 54 #include "core.h" 55 #include "hcd.h" 56 57 static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) 58 { 59 switch (hsotg->op_state) { 60 case OTG_STATE_A_HOST: 61 return "a_host"; 62 case OTG_STATE_A_SUSPEND: 63 return "a_suspend"; 64 case OTG_STATE_A_PERIPHERAL: 65 return "a_peripheral"; 66 case OTG_STATE_B_PERIPHERAL: 67 return "b_peripheral"; 68 case OTG_STATE_B_HOST: 69 return "b_host"; 70 default: 71 return "unknown"; 72 } 73 } 74 75 /** 76 * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. 77 * When the PRTINT interrupt fires, there are certain status bits in the Host 78 * Port that needs to get cleared. 79 * 80 * @hsotg: Programming view of DWC_otg controller 81 */ 82 static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) 83 { 84 u32 hprt0 = dwc2_readl(hsotg, HPRT0); 85 86 if (hprt0 & HPRT0_ENACHG) { 87 hprt0 &= ~HPRT0_ENA; 88 dwc2_writel(hsotg, hprt0, HPRT0); 89 } 90 } 91 92 /** 93 * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message 94 * 95 * @hsotg: Programming view of DWC_otg controller 96 */ 97 static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) 98 { 99 /* Clear interrupt */ 100 dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS); 101 102 dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", 103 dwc2_is_host_mode(hsotg) ? "Host" : "Device"); 104 } 105 106 /** 107 * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG 108 * Interrupt Register (GOTGINT) to determine what interrupt has occurred. 109 * 110 * @hsotg: Programming view of DWC_otg controller 111 */ 112 static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) 113 { 114 u32 gotgint; 115 u32 gotgctl; 116 u32 gintmsk; 117 118 gotgint = dwc2_readl(hsotg, GOTGINT); 119 gotgctl = dwc2_readl(hsotg, GOTGCTL); 120 dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, 121 dwc2_op_state_str(hsotg)); 122 123 if (gotgint & GOTGINT_SES_END_DET) { 124 dev_dbg(hsotg->dev, 125 " ++OTG Interrupt: Session End Detected++ (%s)\n", 126 dwc2_op_state_str(hsotg)); 127 gotgctl = dwc2_readl(hsotg, GOTGCTL); 128 129 if (dwc2_is_device_mode(hsotg)) 130 dwc2_hsotg_disconnect(hsotg); 131 132 if (hsotg->op_state == OTG_STATE_B_HOST) { 133 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 134 } else { 135 /* 136 * If not B_HOST and Device HNP still set, HNP did 137 * not succeed! 138 */ 139 if (gotgctl & GOTGCTL_DEVHNPEN) { 140 dev_dbg(hsotg->dev, "Session End Detected\n"); 141 dev_err(hsotg->dev, 142 "Device Not Connected/Responding!\n"); 143 } 144 145 /* 146 * If Session End Detected the B-Cable has been 147 * disconnected 148 */ 149 /* Reset to a clean state */ 150 hsotg->lx_state = DWC2_L0; 151 } 152 153 gotgctl = dwc2_readl(hsotg, GOTGCTL); 154 gotgctl &= ~GOTGCTL_DEVHNPEN; 155 dwc2_writel(hsotg, gotgctl, GOTGCTL); 156 } 157 158 if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { 159 dev_dbg(hsotg->dev, 160 " ++OTG Interrupt: Session Request Success Status Change++\n"); 161 gotgctl = dwc2_readl(hsotg, GOTGCTL); 162 if (gotgctl & GOTGCTL_SESREQSCS) { 163 if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS && 164 hsotg->params.i2c_enable) { 165 hsotg->srp_success = 1; 166 } else { 167 /* Clear Session Request */ 168 gotgctl = dwc2_readl(hsotg, GOTGCTL); 169 gotgctl &= ~GOTGCTL_SESREQ; 170 dwc2_writel(hsotg, gotgctl, GOTGCTL); 171 } 172 } 173 } 174 175 if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { 176 /* 177 * Print statements during the HNP interrupt handling 178 * can cause it to fail 179 */ 180 gotgctl = dwc2_readl(hsotg, GOTGCTL); 181 /* 182 * WA for 3.00a- HW is not setting cur_mode, even sometimes 183 * this does not help 184 */ 185 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) 186 udelay(100); 187 if (gotgctl & GOTGCTL_HSTNEGSCS) { 188 if (dwc2_is_host_mode(hsotg)) { 189 hsotg->op_state = OTG_STATE_B_HOST; 190 /* 191 * Need to disable SOF interrupt immediately. 192 * When switching from device to host, the PCD 193 * interrupt handler won't handle the interrupt 194 * if host mode is already set. The HCD 195 * interrupt handler won't get called if the 196 * HCD state is HALT. This means that the 197 * interrupt does not get handled and Linux 198 * complains loudly. 199 */ 200 gintmsk = dwc2_readl(hsotg, GINTMSK); 201 gintmsk &= ~GINTSTS_SOF; 202 dwc2_writel(hsotg, gintmsk, GINTMSK); 203 204 /* 205 * Call callback function with spin lock 206 * released 207 */ 208 spin_unlock(&hsotg->lock); 209 210 /* Initialize the Core for Host mode */ 211 dwc2_hcd_start(hsotg); 212 spin_lock(&hsotg->lock); 213 hsotg->op_state = OTG_STATE_B_HOST; 214 } 215 } else { 216 gotgctl = dwc2_readl(hsotg, GOTGCTL); 217 gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); 218 dwc2_writel(hsotg, gotgctl, GOTGCTL); 219 dev_dbg(hsotg->dev, "HNP Failed\n"); 220 dev_err(hsotg->dev, 221 "Device Not Connected/Responding\n"); 222 } 223 } 224 225 if (gotgint & GOTGINT_HST_NEG_DET) { 226 /* 227 * The disconnect interrupt is set at the same time as 228 * Host Negotiation Detected. During the mode switch all 229 * interrupts are cleared so the disconnect interrupt 230 * handler will not get executed. 231 */ 232 dev_dbg(hsotg->dev, 233 " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", 234 (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); 235 if (dwc2_is_device_mode(hsotg)) { 236 dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", 237 hsotg->op_state); 238 spin_unlock(&hsotg->lock); 239 dwc2_hcd_disconnect(hsotg, false); 240 spin_lock(&hsotg->lock); 241 hsotg->op_state = OTG_STATE_A_PERIPHERAL; 242 } else { 243 /* Need to disable SOF interrupt immediately */ 244 gintmsk = dwc2_readl(hsotg, GINTMSK); 245 gintmsk &= ~GINTSTS_SOF; 246 dwc2_writel(hsotg, gintmsk, GINTMSK); 247 spin_unlock(&hsotg->lock); 248 dwc2_hcd_start(hsotg); 249 spin_lock(&hsotg->lock); 250 hsotg->op_state = OTG_STATE_A_HOST; 251 } 252 } 253 254 if (gotgint & GOTGINT_A_DEV_TOUT_CHG) 255 dev_dbg(hsotg->dev, 256 " ++OTG Interrupt: A-Device Timeout Change++\n"); 257 if (gotgint & GOTGINT_DBNCE_DONE) 258 dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); 259 260 /* Clear GOTGINT */ 261 dwc2_writel(hsotg, gotgint, GOTGINT); 262 } 263 264 /** 265 * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status 266 * Change Interrupt 267 * 268 * @hsotg: Programming view of DWC_otg controller 269 * 270 * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a 271 * Device to Host Mode transition or a Host to Device Mode transition. This only 272 * occurs when the cable is connected/removed from the PHY connector. 273 */ 274 static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) 275 { 276 u32 gintmsk; 277 278 /* Clear interrupt */ 279 dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS); 280 281 /* Need to disable SOF interrupt immediately */ 282 gintmsk = dwc2_readl(hsotg, GINTMSK); 283 gintmsk &= ~GINTSTS_SOF; 284 dwc2_writel(hsotg, gintmsk, GINTMSK); 285 286 dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", 287 dwc2_is_host_mode(hsotg) ? "Host" : "Device"); 288 289 /* 290 * Need to schedule a work, as there are possible DELAY function calls. 291 */ 292 if (hsotg->wq_otg) 293 queue_work(hsotg->wq_otg, &hsotg->wf_otg); 294 } 295 296 /** 297 * dwc2_handle_session_req_intr() - This interrupt indicates that a device is 298 * initiating the Session Request Protocol to request the host to turn on bus 299 * power so a new session can begin 300 * 301 * @hsotg: Programming view of DWC_otg controller 302 * 303 * This handler responds by turning on bus power. If the DWC_otg controller is 304 * in low power mode, this handler brings the controller out of low power mode 305 * before turning on bus power. 306 */ 307 static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) 308 { 309 int ret; 310 u32 hprt0; 311 312 /* Clear interrupt */ 313 dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS); 314 315 dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", 316 hsotg->lx_state); 317 318 if (dwc2_is_device_mode(hsotg)) { 319 if (hsotg->lx_state == DWC2_L2) { 320 if (hsotg->in_ppd) { 321 ret = dwc2_exit_partial_power_down(hsotg, 0, 322 true); 323 if (ret) 324 dev_err(hsotg->dev, 325 "exit power_down failed\n"); 326 } 327 328 /* Exit gadget mode clock gating. */ 329 if (hsotg->params.power_down == 330 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) 331 dwc2_gadget_exit_clock_gating(hsotg, 0); 332 } 333 334 /* 335 * Report disconnect if there is any previous session 336 * established 337 */ 338 dwc2_hsotg_disconnect(hsotg); 339 } else { 340 /* Turn on the port power bit. */ 341 hprt0 = dwc2_read_hprt0(hsotg); 342 hprt0 |= HPRT0_PWR; 343 dwc2_writel(hsotg, hprt0, HPRT0); 344 /* Connect hcd after port power is set. */ 345 dwc2_hcd_connect(hsotg); 346 } 347 } 348 349 /** 350 * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state 351 * 352 * @hsotg: Programming view of DWC_otg controller 353 * 354 */ 355 static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg) 356 { 357 u32 glpmcfg; 358 u32 i = 0; 359 360 if (hsotg->lx_state != DWC2_L1) { 361 dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n"); 362 return; 363 } 364 365 glpmcfg = dwc2_readl(hsotg, GLPMCFG); 366 if (dwc2_is_device_mode(hsotg)) { 367 dev_dbg(hsotg->dev, "Exit from L1 state\n"); 368 glpmcfg &= ~GLPMCFG_ENBLSLPM; 369 glpmcfg &= ~GLPMCFG_HIRD_THRES_EN; 370 dwc2_writel(hsotg, glpmcfg, GLPMCFG); 371 372 do { 373 glpmcfg = dwc2_readl(hsotg, GLPMCFG); 374 375 if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK | 376 GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS))) 377 break; 378 379 udelay(1); 380 } while (++i < 200); 381 382 if (i == 200) { 383 dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n"); 384 return; 385 } 386 dwc2_gadget_init_lpm(hsotg); 387 } else { 388 /* TODO */ 389 dev_err(hsotg->dev, "Host side LPM is not supported.\n"); 390 return; 391 } 392 393 /* Change to L0 state */ 394 hsotg->lx_state = DWC2_L0; 395 396 /* Inform gadget to exit from L1 */ 397 call_gadget(hsotg, resume); 398 } 399 400 /* 401 * This interrupt indicates that the DWC_otg controller has detected a 402 * resume or remote wakeup sequence. If the DWC_otg controller is in 403 * low power mode, the handler must brings the controller out of low 404 * power mode. The controller automatically begins resume signaling. 405 * The handler schedules a time to stop resume signaling. 406 */ 407 static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) 408 { 409 int ret; 410 411 /* Clear interrupt */ 412 dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS); 413 414 dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); 415 dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); 416 417 if (hsotg->lx_state == DWC2_L1) { 418 dwc2_wakeup_from_lpm_l1(hsotg); 419 return; 420 } 421 422 if (dwc2_is_device_mode(hsotg)) { 423 dev_dbg(hsotg->dev, "DSTS=0x%0x\n", 424 dwc2_readl(hsotg, DSTS)); 425 if (hsotg->lx_state == DWC2_L2) { 426 if (hsotg->in_ppd) { 427 u32 dctl = dwc2_readl(hsotg, DCTL); 428 /* Clear Remote Wakeup Signaling */ 429 dctl &= ~DCTL_RMTWKUPSIG; 430 dwc2_writel(hsotg, dctl, DCTL); 431 ret = dwc2_exit_partial_power_down(hsotg, 1, 432 true); 433 if (ret) 434 dev_err(hsotg->dev, 435 "exit partial_power_down failed\n"); 436 call_gadget(hsotg, resume); 437 } 438 439 /* Exit gadget mode clock gating. */ 440 if (hsotg->params.power_down == 441 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) 442 dwc2_gadget_exit_clock_gating(hsotg, 0); 443 } else { 444 /* Change to L0 state */ 445 hsotg->lx_state = DWC2_L0; 446 } 447 } else { 448 if (hsotg->lx_state == DWC2_L2) { 449 if (hsotg->in_ppd) { 450 ret = dwc2_exit_partial_power_down(hsotg, 1, 451 true); 452 if (ret) 453 dev_err(hsotg->dev, 454 "exit partial_power_down failed\n"); 455 } 456 457 if (hsotg->params.power_down == 458 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) 459 dwc2_host_exit_clock_gating(hsotg, 1); 460 461 /* 462 * If we've got this quirk then the PHY is stuck upon 463 * wakeup. Assert reset. This will propagate out and 464 * eventually we'll re-enumerate the device. Not great 465 * but the best we can do. We can't call phy_reset() 466 * at interrupt time but there's no hurry, so we'll 467 * schedule it for later. 468 */ 469 if (hsotg->reset_phy_on_wake) 470 dwc2_host_schedule_phy_reset(hsotg); 471 472 mod_timer(&hsotg->wkp_timer, 473 jiffies + msecs_to_jiffies(71)); 474 } else { 475 /* Change to L0 state */ 476 hsotg->lx_state = DWC2_L0; 477 } 478 } 479 } 480 481 /* 482 * This interrupt indicates that a device has been disconnected from the 483 * root port 484 */ 485 static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) 486 { 487 dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS); 488 489 dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", 490 dwc2_is_host_mode(hsotg) ? "Host" : "Device", 491 dwc2_op_state_str(hsotg)); 492 493 if (hsotg->op_state == OTG_STATE_A_HOST) 494 dwc2_hcd_disconnect(hsotg, false); 495 } 496 497 /* 498 * This interrupt indicates that SUSPEND state has been detected on the USB. 499 * 500 * For HNP the USB Suspend interrupt signals the change from "a_peripheral" 501 * to "a_host". 502 * 503 * When power management is enabled the core will be put in low power mode. 504 */ 505 static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) 506 { 507 u32 dsts; 508 int ret; 509 510 /* Clear interrupt */ 511 dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS); 512 513 dev_dbg(hsotg->dev, "USB SUSPEND\n"); 514 515 if (dwc2_is_device_mode(hsotg)) { 516 /* 517 * Check the Device status register to determine if the Suspend 518 * state is active 519 */ 520 dsts = dwc2_readl(hsotg, DSTS); 521 dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts); 522 dev_dbg(hsotg->dev, 523 "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n", 524 !!(dsts & DSTS_SUSPSTS), 525 hsotg->hw_params.power_optimized, 526 hsotg->hw_params.hibernation); 527 528 /* Ignore suspend request before enumeration */ 529 if (!dwc2_is_device_connected(hsotg)) { 530 dev_dbg(hsotg->dev, 531 "ignore suspend request before enumeration\n"); 532 return; 533 } 534 if (dsts & DSTS_SUSPSTS) { 535 switch (hsotg->params.power_down) { 536 case DWC2_POWER_DOWN_PARAM_PARTIAL: 537 ret = dwc2_enter_partial_power_down(hsotg); 538 if (ret) 539 dev_err(hsotg->dev, 540 "enter partial_power_down failed\n"); 541 542 udelay(100); 543 544 /* Ask phy to be suspended */ 545 if (!IS_ERR_OR_NULL(hsotg->uphy)) 546 usb_phy_set_suspend(hsotg->uphy, true); 547 break; 548 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 549 ret = dwc2_enter_hibernation(hsotg, 0); 550 if (ret) 551 dev_err(hsotg->dev, 552 "enter hibernation failed\n"); 553 break; 554 case DWC2_POWER_DOWN_PARAM_NONE: 555 /* 556 * If neither hibernation nor partial power down are supported, 557 * clock gating is used to save power. 558 */ 559 if (!hsotg->params.no_clock_gating) 560 dwc2_gadget_enter_clock_gating(hsotg); 561 } 562 563 /* 564 * Change to L2 (suspend) state before releasing 565 * spinlock 566 */ 567 hsotg->lx_state = DWC2_L2; 568 569 /* Call gadget suspend callback */ 570 call_gadget(hsotg, suspend); 571 } 572 } else { 573 if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { 574 dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); 575 576 /* Change to L2 (suspend) state */ 577 hsotg->lx_state = DWC2_L2; 578 /* Clear the a_peripheral flag, back to a_host */ 579 spin_unlock(&hsotg->lock); 580 dwc2_hcd_start(hsotg); 581 spin_lock(&hsotg->lock); 582 hsotg->op_state = OTG_STATE_A_HOST; 583 } 584 } 585 } 586 587 /** 588 * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler 589 * 590 * @hsotg: Programming view of DWC_otg controller 591 * 592 */ 593 static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg) 594 { 595 u32 glpmcfg; 596 u32 pcgcctl; 597 u32 hird; 598 u32 hird_thres; 599 u32 hird_thres_en; 600 u32 enslpm; 601 602 /* Clear interrupt */ 603 dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS); 604 605 glpmcfg = dwc2_readl(hsotg, GLPMCFG); 606 607 if (!(glpmcfg & GLPMCFG_LPMCAP)) { 608 dev_err(hsotg->dev, "Unexpected LPM interrupt\n"); 609 return; 610 } 611 612 hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT; 613 hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK & 614 ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT; 615 hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN; 616 enslpm = glpmcfg & GLPMCFG_ENBLSLPM; 617 618 if (dwc2_is_device_mode(hsotg)) { 619 dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en); 620 621 if (hird_thres_en && hird >= hird_thres) { 622 dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n"); 623 } else if (enslpm) { 624 dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n"); 625 } else { 626 dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n"); 627 628 pcgcctl = dwc2_readl(hsotg, PCGCTL); 629 pcgcctl |= PCGCTL_ENBL_SLEEP_GATING; 630 dwc2_writel(hsotg, pcgcctl, PCGCTL); 631 } 632 /** 633 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us) 634 */ 635 udelay(10); 636 637 glpmcfg = dwc2_readl(hsotg, GLPMCFG); 638 639 if (glpmcfg & GLPMCFG_SLPSTS) { 640 /* Save the current state */ 641 hsotg->lx_state = DWC2_L1; 642 dev_dbg(hsotg->dev, 643 "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg); 644 645 /* Inform gadget that we are in L1 state */ 646 call_gadget(hsotg, suspend); 647 } 648 } 649 } 650 651 #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ 652 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ 653 GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ 654 GINTSTS_USBSUSP | GINTSTS_PRTINT | \ 655 GINTSTS_LPMTRANRCVD) 656 657 /* 658 * This function returns the Core Interrupt register 659 */ 660 static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) 661 { 662 u32 gintsts; 663 u32 gintmsk; 664 u32 gahbcfg; 665 u32 gintmsk_common = GINTMSK_COMMON; 666 667 gintsts = dwc2_readl(hsotg, GINTSTS); 668 gintmsk = dwc2_readl(hsotg, GINTMSK); 669 gahbcfg = dwc2_readl(hsotg, GAHBCFG); 670 671 /* If any common interrupts set */ 672 if (gintsts & gintmsk_common) 673 dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", 674 gintsts, gintmsk); 675 676 if (gahbcfg & GAHBCFG_GLBL_INTR_EN) 677 return gintsts & gintmsk & gintmsk_common; 678 else 679 return 0; 680 } 681 682 /** 683 * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect. 684 * Exits hibernation without restoring registers. 685 * 686 * @hsotg: Programming view of DWC_otg controller 687 * @gpwrdn: GPWRDN register 688 */ 689 static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg, 690 u32 gpwrdn) 691 { 692 u32 gpwrdn_tmp; 693 694 /* Switch-on voltage to the core */ 695 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); 696 gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH; 697 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); 698 udelay(5); 699 700 /* Reset core */ 701 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); 702 gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN; 703 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); 704 udelay(5); 705 706 /* Disable Power Down Clamp */ 707 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); 708 gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP; 709 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); 710 udelay(5); 711 712 /* Deassert reset core */ 713 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); 714 gpwrdn_tmp |= GPWRDN_PWRDNRSTN; 715 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); 716 udelay(5); 717 718 /* Disable PMU interrupt */ 719 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); 720 gpwrdn_tmp &= ~GPWRDN_PMUINTSEL; 721 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); 722 723 /* De-assert Wakeup Logic */ 724 gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); 725 gpwrdn_tmp &= ~GPWRDN_PMUACTV; 726 dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); 727 728 hsotg->hibernated = 0; 729 hsotg->bus_suspended = 0; 730 731 if (gpwrdn & GPWRDN_IDSTS) { 732 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 733 dwc2_core_init(hsotg, false); 734 dwc2_enable_global_interrupts(hsotg); 735 dwc2_hsotg_core_init_disconnected(hsotg, false); 736 dwc2_hsotg_core_connect(hsotg); 737 } else { 738 hsotg->op_state = OTG_STATE_A_HOST; 739 740 /* Initialize the Core for Host mode */ 741 dwc2_core_init(hsotg, false); 742 dwc2_enable_global_interrupts(hsotg); 743 dwc2_hcd_start(hsotg); 744 } 745 } 746 747 /* 748 * GPWRDN interrupt handler. 749 * 750 * The GPWRDN interrupts are those that occur in both Host and 751 * Device mode while core is in hibernated state. 752 */ 753 static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg) 754 { 755 u32 gpwrdn; 756 int linestate; 757 int ret = 0; 758 759 gpwrdn = dwc2_readl(hsotg, GPWRDN); 760 /* clear all interrupt */ 761 dwc2_writel(hsotg, gpwrdn, GPWRDN); 762 linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT; 763 dev_dbg(hsotg->dev, 764 "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__, 765 gpwrdn); 766 767 if ((gpwrdn & GPWRDN_DISCONN_DET) && 768 (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) { 769 dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__); 770 /* 771 * Call disconnect detect function to exit from 772 * hibernation 773 */ 774 dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn); 775 } else if ((gpwrdn & GPWRDN_LNSTSCHG) && 776 (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) { 777 dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__); 778 if (hsotg->hw_params.hibernation && 779 hsotg->hibernated) { 780 if (gpwrdn & GPWRDN_IDSTS) { 781 ret = dwc2_exit_hibernation(hsotg, 0, 0, 0); 782 if (ret) 783 dev_err(hsotg->dev, 784 "exit hibernation failed.\n"); 785 call_gadget(hsotg, resume); 786 } else { 787 ret = dwc2_exit_hibernation(hsotg, 1, 0, 1); 788 if (ret) 789 dev_err(hsotg->dev, 790 "exit hibernation failed.\n"); 791 } 792 } 793 } else if ((gpwrdn & GPWRDN_RST_DET) && 794 (gpwrdn & GPWRDN_RST_DET_MSK)) { 795 dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__); 796 if (!linestate) { 797 ret = dwc2_exit_hibernation(hsotg, 0, 1, 0); 798 if (ret) 799 dev_err(hsotg->dev, 800 "exit hibernation failed.\n"); 801 } 802 } else if ((gpwrdn & GPWRDN_STS_CHGINT) && 803 (gpwrdn & GPWRDN_STS_CHGINT_MSK)) { 804 dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__); 805 /* 806 * As GPWRDN_STS_CHGINT exit from hibernation flow is 807 * the same as in GPWRDN_DISCONN_DET flow. Call 808 * disconnect detect helper function to exit from 809 * hibernation. 810 */ 811 dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn); 812 } 813 814 return ret; 815 } 816 817 /* 818 * Common interrupt handler 819 * 820 * The common interrupts are those that occur in both Host and Device mode. 821 * This handler handles the following interrupts: 822 * - Mode Mismatch Interrupt 823 * - OTG Interrupt 824 * - Connector ID Status Change Interrupt 825 * - Disconnect Interrupt 826 * - Session Request Interrupt 827 * - Resume / Remote Wakeup Detected Interrupt 828 * - Suspend Interrupt 829 */ 830 irqreturn_t dwc2_handle_common_intr(int irq, void *dev) 831 { 832 struct dwc2_hsotg *hsotg = dev; 833 u32 gintsts; 834 irqreturn_t retval = IRQ_NONE; 835 836 spin_lock(&hsotg->lock); 837 838 if (!dwc2_is_controller_alive(hsotg)) { 839 dev_warn(hsotg->dev, "Controller is dead\n"); 840 goto out; 841 } 842 843 /* Reading current frame number value in device or host modes. */ 844 if (dwc2_is_device_mode(hsotg)) 845 hsotg->frame_number = (dwc2_readl(hsotg, DSTS) 846 & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT; 847 else 848 hsotg->frame_number = (dwc2_readl(hsotg, HFNUM) 849 & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 850 851 gintsts = dwc2_read_common_intr(hsotg); 852 if (gintsts & ~GINTSTS_PRTINT) 853 retval = IRQ_HANDLED; 854 855 /* In case of hibernated state gintsts must not work */ 856 if (hsotg->hibernated) { 857 dwc2_handle_gpwrdn_intr(hsotg); 858 retval = IRQ_HANDLED; 859 goto out; 860 } 861 862 if (gintsts & GINTSTS_MODEMIS) 863 dwc2_handle_mode_mismatch_intr(hsotg); 864 if (gintsts & GINTSTS_OTGINT) 865 dwc2_handle_otg_intr(hsotg); 866 if (gintsts & GINTSTS_CONIDSTSCHNG) 867 dwc2_handle_conn_id_status_change_intr(hsotg); 868 if (gintsts & GINTSTS_DISCONNINT) 869 dwc2_handle_disconnect_intr(hsotg); 870 if (gintsts & GINTSTS_SESSREQINT) 871 dwc2_handle_session_req_intr(hsotg); 872 if (gintsts & GINTSTS_WKUPINT) 873 dwc2_handle_wakeup_detected_intr(hsotg); 874 if (gintsts & GINTSTS_USBSUSP) 875 dwc2_handle_usb_suspend_intr(hsotg); 876 if (gintsts & GINTSTS_LPMTRANRCVD) 877 dwc2_handle_lpm_intr(hsotg); 878 879 if (gintsts & GINTSTS_PRTINT) { 880 /* 881 * The port interrupt occurs while in device mode with HPRT0 882 * Port Enable/Disable 883 */ 884 if (dwc2_is_device_mode(hsotg)) { 885 dev_dbg(hsotg->dev, 886 " --Port interrupt received in Device mode--\n"); 887 dwc2_handle_usb_port_intr(hsotg); 888 retval = IRQ_HANDLED; 889 } 890 } 891 892 out: 893 spin_unlock(&hsotg->lock); 894 return retval; 895 } 896