xref: /openbmc/linux/drivers/usb/dwc2/core.c (revision 01ab991f)
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * core.c - DesignWare HS OTG Controller common routines
4  *
5  * Copyright (C) 2004-2013 Synopsys, Inc.
6  */
7 
8 /*
9  * The Core code provides basic services for accessing and managing the
10  * DWC_otg hardware. These services are used by both the Host Controller
11  * Driver and the Peripheral Controller Driver.
12  */
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/spinlock.h>
17 #include <linux/interrupt.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/delay.h>
20 #include <linux/io.h>
21 #include <linux/slab.h>
22 #include <linux/usb.h>
23 
24 #include <linux/usb/hcd.h>
25 #include <linux/usb/ch11.h>
26 
27 #include "core.h"
28 #include "hcd.h"
29 
30 /**
31  * dwc2_backup_global_registers() - Backup global controller registers.
32  * When suspending usb bus, registers needs to be backuped
33  * if controller power is disabled once suspended.
34  *
35  * @hsotg: Programming view of the DWC_otg controller
36  */
37 int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
38 {
39 	struct dwc2_gregs_backup *gr;
40 
41 	dev_dbg(hsotg->dev, "%s\n", __func__);
42 
43 	/* Backup global regs */
44 	gr = &hsotg->gr_backup;
45 
46 	gr->gotgctl = dwc2_readl(hsotg, GOTGCTL);
47 	gr->gintmsk = dwc2_readl(hsotg, GINTMSK);
48 	gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG);
49 	gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG);
50 	gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
51 	gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
52 	gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
53 	gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
54 	gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG);
55 	gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL);
56 	gr->pcgcctl = dwc2_readl(hsotg, PCGCTL);
57 
58 	gr->valid = true;
59 	return 0;
60 }
61 
62 /**
63  * dwc2_restore_global_registers() - Restore controller global registers.
64  * When resuming usb bus, device registers needs to be restored
65  * if controller power were disabled.
66  *
67  * @hsotg: Programming view of the DWC_otg controller
68  */
69 int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
70 {
71 	struct dwc2_gregs_backup *gr;
72 
73 	dev_dbg(hsotg->dev, "%s\n", __func__);
74 
75 	/* Restore global regs */
76 	gr = &hsotg->gr_backup;
77 	if (!gr->valid) {
78 		dev_err(hsotg->dev, "%s: no global registers to restore\n",
79 			__func__);
80 		return -EINVAL;
81 	}
82 	gr->valid = false;
83 
84 	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
85 	dwc2_writel(hsotg, gr->gotgctl, GOTGCTL);
86 	dwc2_writel(hsotg, gr->gintmsk, GINTMSK);
87 	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
88 	dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG);
89 	dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ);
90 	dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ);
91 	dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG);
92 	dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1);
93 	dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG);
94 	dwc2_writel(hsotg, gr->pcgcctl, PCGCTL);
95 	dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL);
96 
97 	return 0;
98 }
99 
100 /**
101  * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
102  *
103  * @hsotg: Programming view of the DWC_otg controller
104  * @rem_wakeup: indicates whether resume is initiated by Reset.
105  * @restore: Controller registers need to be restored
106  */
107 int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
108 				 bool restore)
109 {
110 	struct dwc2_gregs_backup *gr;
111 
112 	gr = &hsotg->gr_backup;
113 
114 	/*
115 	 * Restore host or device regisers with the same mode core enterted
116 	 * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
117 	 * value of the "gotgctl" register.
118 	 */
119 	if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
120 		return dwc2_host_exit_partial_power_down(hsotg, rem_wakeup,
121 							 restore);
122 	else
123 		return dwc2_gadget_exit_partial_power_down(hsotg, restore);
124 }
125 
126 /**
127  * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
128  *
129  * @hsotg: Programming view of the DWC_otg controller
130  */
131 int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
132 {
133 	if (dwc2_is_host_mode(hsotg))
134 		return dwc2_host_enter_partial_power_down(hsotg);
135 	else
136 		return dwc2_gadget_enter_partial_power_down(hsotg);
137 }
138 
139 /**
140  * dwc2_restore_essential_regs() - Restore essiential regs of core.
141  *
142  * @hsotg: Programming view of the DWC_otg controller
143  * @rmode: Restore mode, enabled in case of remote-wakeup.
144  * @is_host: Host or device mode.
145  */
146 static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
147 					int is_host)
148 {
149 	u32 pcgcctl;
150 	struct dwc2_gregs_backup *gr;
151 	struct dwc2_dregs_backup *dr;
152 	struct dwc2_hregs_backup *hr;
153 
154 	gr = &hsotg->gr_backup;
155 	dr = &hsotg->dr_backup;
156 	hr = &hsotg->hr_backup;
157 
158 	dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);
159 
160 	/* Load restore values for [31:14] bits */
161 	pcgcctl = (gr->pcgcctl & 0xffffc000);
162 	/* If High Speed */
163 	if (is_host) {
164 		if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
165 			pcgcctl |= BIT(17);
166 	} else {
167 		if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
168 			pcgcctl |= BIT(17);
169 	}
170 	dwc2_writel(hsotg, pcgcctl, PCGCTL);
171 
172 	/* Umnask global Interrupt in GAHBCFG and restore it */
173 	dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);
174 
175 	/* Clear all pending interupts */
176 	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
177 
178 	/* Unmask restore done interrupt */
179 	dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK);
180 
181 	/* Restore GUSBCFG and HCFG/DCFG */
182 	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
183 
184 	if (is_host) {
185 		dwc2_writel(hsotg, hr->hcfg, HCFG);
186 		if (rmode)
187 			pcgcctl |= PCGCTL_RESTOREMODE;
188 		dwc2_writel(hsotg, pcgcctl, PCGCTL);
189 		udelay(10);
190 
191 		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
192 		dwc2_writel(hsotg, pcgcctl, PCGCTL);
193 		udelay(10);
194 	} else {
195 		dwc2_writel(hsotg, dr->dcfg, DCFG);
196 		if (!rmode)
197 			pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
198 		dwc2_writel(hsotg, pcgcctl, PCGCTL);
199 		udelay(10);
200 
201 		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
202 		dwc2_writel(hsotg, pcgcctl, PCGCTL);
203 		udelay(10);
204 	}
205 }
206 
207 /**
208  * dwc2_hib_restore_common() - Common part of restore routine.
209  *
210  * @hsotg: Programming view of the DWC_otg controller
211  * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
212  * @is_host: Host or device mode.
213  */
214 void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
215 			     int is_host)
216 {
217 	u32 gpwrdn;
218 
219 	/* Switch-on voltage to the core */
220 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
221 	gpwrdn &= ~GPWRDN_PWRDNSWTCH;
222 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
223 	udelay(10);
224 
225 	/* Reset core */
226 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
227 	gpwrdn &= ~GPWRDN_PWRDNRSTN;
228 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
229 	udelay(10);
230 
231 	/* Enable restore from PMU */
232 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
233 	gpwrdn |= GPWRDN_RESTORE;
234 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
235 	udelay(10);
236 
237 	/* Disable Power Down Clamp */
238 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
239 	gpwrdn &= ~GPWRDN_PWRDNCLMP;
240 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
241 	udelay(50);
242 
243 	if (!is_host && rem_wakeup)
244 		udelay(70);
245 
246 	/* Deassert reset core */
247 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
248 	gpwrdn |= GPWRDN_PWRDNRSTN;
249 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
250 	udelay(10);
251 
252 	/* Disable PMU interrupt */
253 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
254 	gpwrdn &= ~GPWRDN_PMUINTSEL;
255 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
256 	udelay(10);
257 
258 	/* Set Restore Essential Regs bit in PCGCCTL register */
259 	dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);
260 
261 	/*
262 	 * Wait For Restore_done Interrupt. This mechanism of polling the
263 	 * interrupt is introduced to avoid any possible race conditions
264 	 */
265 	if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
266 				    20000)) {
267 		dev_dbg(hsotg->dev,
268 			"%s: Restore Done wasn't generated here\n",
269 			__func__);
270 	} else {
271 		dev_dbg(hsotg->dev, "restore done  generated here\n");
272 
273 		/*
274 		 * To avoid restore done interrupt storm after restore is
275 		 * generated clear GINTSTS_RESTOREDONE bit.
276 		 */
277 		dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTSTS);
278 	}
279 }
280 
281 /**
282  * dwc2_wait_for_mode() - Waits for the controller mode.
283  * @hsotg:	Programming view of the DWC_otg controller.
284  * @host_mode:	If true, waits for host mode, otherwise device mode.
285  */
286 static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
287 			       bool host_mode)
288 {
289 	ktime_t start;
290 	ktime_t end;
291 	unsigned int timeout = 110;
292 
293 	dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
294 		 host_mode ? "host" : "device");
295 
296 	start = ktime_get();
297 
298 	while (1) {
299 		s64 ms;
300 
301 		if (dwc2_is_host_mode(hsotg) == host_mode) {
302 			dev_vdbg(hsotg->dev, "%s mode set\n",
303 				 host_mode ? "Host" : "Device");
304 			break;
305 		}
306 
307 		end = ktime_get();
308 		ms = ktime_to_ms(ktime_sub(end, start));
309 
310 		if (ms >= (s64)timeout) {
311 			dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
312 				 __func__, host_mode ? "host" : "device");
313 			break;
314 		}
315 
316 		usleep_range(1000, 2000);
317 	}
318 }
319 
320 /**
321  * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
322  * filter is enabled.
323  *
324  * @hsotg: Programming view of DWC_otg controller
325  */
326 static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
327 {
328 	u32 gsnpsid;
329 	u32 ghwcfg4;
330 
331 	if (!dwc2_hw_is_otg(hsotg))
332 		return false;
333 
334 	/* Check if core configuration includes the IDDIG filter. */
335 	ghwcfg4 = dwc2_readl(hsotg, GHWCFG4);
336 	if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
337 		return false;
338 
339 	/*
340 	 * Check if the IDDIG debounce filter is bypassed. Available
341 	 * in core version >= 3.10a.
342 	 */
343 	gsnpsid = dwc2_readl(hsotg, GSNPSID);
344 	if (gsnpsid >= DWC2_CORE_REV_3_10a) {
345 		u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
346 
347 		if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
348 			return false;
349 	}
350 
351 	return true;
352 }
353 
354 /*
355  * dwc2_enter_hibernation() - Common function to enter hibernation.
356  *
357  * @hsotg: Programming view of the DWC_otg controller
358  * @is_host: True if core is in host mode.
359  *
360  * Return: 0 if successful, negative error code otherwise
361  */
362 int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
363 {
364 	if (is_host)
365 		return dwc2_host_enter_hibernation(hsotg);
366 	else
367 		return dwc2_gadget_enter_hibernation(hsotg);
368 }
369 
370 /*
371  * dwc2_exit_hibernation() - Common function to exit from hibernation.
372  *
373  * @hsotg: Programming view of the DWC_otg controller
374  * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
375  * @reset: Enabled in case of restore with reset.
376  * @is_host: True if core is in host mode.
377  *
378  * Return: 0 if successful, negative error code otherwise
379  */
380 int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
381 			  int reset, int is_host)
382 {
383 	if (is_host)
384 		return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
385 	else
386 		return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
387 }
388 
389 /*
390  * Do core a soft reset of the core.  Be careful with this because it
391  * resets all the internal state machines of the core.
392  */
393 int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
394 {
395 	u32 greset;
396 	bool wait_for_host_mode = false;
397 
398 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
399 
400 	/*
401 	 * If the current mode is host, either due to the force mode
402 	 * bit being set (which persists after core reset) or the
403 	 * connector id pin, a core soft reset will temporarily reset
404 	 * the mode to device. A delay from the IDDIG debounce filter
405 	 * will occur before going back to host mode.
406 	 *
407 	 * Determine whether we will go back into host mode after a
408 	 * reset and account for this delay after the reset.
409 	 */
410 	if (dwc2_iddig_filter_enabled(hsotg)) {
411 		u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
412 		u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
413 
414 		if (!(gotgctl & GOTGCTL_CONID_B) ||
415 		    (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
416 			wait_for_host_mode = true;
417 		}
418 	}
419 
420 	/* Core Soft Reset */
421 	greset = dwc2_readl(hsotg, GRSTCTL);
422 	greset |= GRSTCTL_CSFTRST;
423 	dwc2_writel(hsotg, greset, GRSTCTL);
424 
425 	if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) <
426 		(DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) {
427 		if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL,
428 					      GRSTCTL_CSFTRST, 10000)) {
429 			dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n",
430 				 __func__);
431 			return -EBUSY;
432 		}
433 	} else {
434 		if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL,
435 					    GRSTCTL_CSFTRST_DONE, 10000)) {
436 			dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n",
437 				 __func__);
438 			return -EBUSY;
439 		}
440 		greset = dwc2_readl(hsotg, GRSTCTL);
441 		greset &= ~GRSTCTL_CSFTRST;
442 		greset |= GRSTCTL_CSFTRST_DONE;
443 		dwc2_writel(hsotg, greset, GRSTCTL);
444 	}
445 
446 	/*
447 	 * Switching from device mode to host mode by disconnecting
448 	 * device cable core enters and exits form hibernation.
449 	 * However, the fifo map remains not cleared. It results
450 	 * to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/
451 	 * gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2])
452 	 * if in host mode we disconnect the micro a to b host
453 	 * cable. Because core reset occurs.
454 	 * To avoid the WARNING, fifo_map should be cleared
455 	 * in dwc2_core_reset() function by taking into account configs.
456 	 * fifo_map must be cleared only if driver is configured in
457 	 * "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE"
458 	 * mode.
459 	 */
460 	dwc2_clear_fifo_map(hsotg);
461 
462 	/* Wait for AHB master IDLE state */
463 	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
464 		dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
465 			 __func__);
466 		return -EBUSY;
467 	}
468 
469 	if (wait_for_host_mode && !skip_wait)
470 		dwc2_wait_for_mode(hsotg, true);
471 
472 	return 0;
473 }
474 
475 /**
476  * dwc2_force_mode() - Force the mode of the controller.
477  *
478  * Forcing the mode is needed for two cases:
479  *
480  * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
481  * controller to stay in a particular mode regardless of ID pin
482  * changes. We do this once during probe.
483  *
484  * 2) During probe we want to read reset values of the hw
485  * configuration registers that are only available in either host or
486  * device mode. We may need to force the mode if the current mode does
487  * not allow us to access the register in the mode that we want.
488  *
489  * In either case it only makes sense to force the mode if the
490  * controller hardware is OTG capable.
491  *
492  * Checks are done in this function to determine whether doing a force
493  * would be valid or not.
494  *
495  * If a force is done, it requires a IDDIG debounce filter delay if
496  * the filter is configured and enabled. We poll the current mode of
497  * the controller to account for this delay.
498  *
499  * @hsotg: Programming view of DWC_otg controller
500  * @host: Host mode flag
501  */
502 void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
503 {
504 	u32 gusbcfg;
505 	u32 set;
506 	u32 clear;
507 
508 	dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
509 
510 	/*
511 	 * Force mode has no effect if the hardware is not OTG.
512 	 */
513 	if (!dwc2_hw_is_otg(hsotg))
514 		return;
515 
516 	/*
517 	 * If dr_mode is either peripheral or host only, there is no
518 	 * need to ever force the mode to the opposite mode.
519 	 */
520 	if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
521 		return;
522 
523 	if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
524 		return;
525 
526 	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
527 
528 	set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
529 	clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
530 
531 	gusbcfg &= ~clear;
532 	gusbcfg |= set;
533 	dwc2_writel(hsotg, gusbcfg, GUSBCFG);
534 
535 	dwc2_wait_for_mode(hsotg, host);
536 	return;
537 }
538 
539 /**
540  * dwc2_clear_force_mode() - Clears the force mode bits.
541  *
542  * After clearing the bits, wait up to 100 ms to account for any
543  * potential IDDIG filter delay. We can't know if we expect this delay
544  * or not because the value of the connector ID status is affected by
545  * the force mode. We only need to call this once during probe if
546  * dr_mode == OTG.
547  *
548  * @hsotg: Programming view of DWC_otg controller
549  */
550 static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
551 {
552 	u32 gusbcfg;
553 
554 	if (!dwc2_hw_is_otg(hsotg))
555 		return;
556 
557 	dev_dbg(hsotg->dev, "Clearing force mode bits\n");
558 
559 	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
560 	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
561 	gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
562 	dwc2_writel(hsotg, gusbcfg, GUSBCFG);
563 
564 	if (dwc2_iddig_filter_enabled(hsotg))
565 		msleep(100);
566 }
567 
568 /*
569  * Sets or clears force mode based on the dr_mode parameter.
570  */
571 void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
572 {
573 	switch (hsotg->dr_mode) {
574 	case USB_DR_MODE_HOST:
575 		/*
576 		 * NOTE: This is required for some rockchip soc based
577 		 * platforms on their host-only dwc2.
578 		 */
579 		if (!dwc2_hw_is_otg(hsotg))
580 			msleep(50);
581 
582 		break;
583 	case USB_DR_MODE_PERIPHERAL:
584 		dwc2_force_mode(hsotg, false);
585 		break;
586 	case USB_DR_MODE_OTG:
587 		dwc2_clear_force_mode(hsotg);
588 		break;
589 	default:
590 		dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
591 			 __func__, hsotg->dr_mode);
592 		break;
593 	}
594 }
595 
596 /*
597  * dwc2_enable_acg - enable active clock gating feature
598  */
599 void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
600 {
601 	if (hsotg->params.acg_enable) {
602 		u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
603 
604 		dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
605 		pcgcctl1 |= PCGCCTL1_GATEEN;
606 		dwc2_writel(hsotg, pcgcctl1, PCGCCTL1);
607 	}
608 }
609 
610 /**
611  * dwc2_dump_host_registers() - Prints the host registers
612  *
613  * @hsotg: Programming view of DWC_otg controller
614  *
615  * NOTE: This function will be removed once the peripheral controller code
616  * is integrated and the driver is stable
617  */
618 void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
619 {
620 #ifdef DEBUG
621 	u32 __iomem *addr;
622 	int i;
623 
624 	dev_dbg(hsotg->dev, "Host Global Registers\n");
625 	addr = hsotg->regs + HCFG;
626 	dev_dbg(hsotg->dev, "HCFG	 @0x%08lX : 0x%08X\n",
627 		(unsigned long)addr, dwc2_readl(hsotg, HCFG));
628 	addr = hsotg->regs + HFIR;
629 	dev_dbg(hsotg->dev, "HFIR	 @0x%08lX : 0x%08X\n",
630 		(unsigned long)addr, dwc2_readl(hsotg, HFIR));
631 	addr = hsotg->regs + HFNUM;
632 	dev_dbg(hsotg->dev, "HFNUM	 @0x%08lX : 0x%08X\n",
633 		(unsigned long)addr, dwc2_readl(hsotg, HFNUM));
634 	addr = hsotg->regs + HPTXSTS;
635 	dev_dbg(hsotg->dev, "HPTXSTS	 @0x%08lX : 0x%08X\n",
636 		(unsigned long)addr, dwc2_readl(hsotg, HPTXSTS));
637 	addr = hsotg->regs + HAINT;
638 	dev_dbg(hsotg->dev, "HAINT	 @0x%08lX : 0x%08X\n",
639 		(unsigned long)addr, dwc2_readl(hsotg, HAINT));
640 	addr = hsotg->regs + HAINTMSK;
641 	dev_dbg(hsotg->dev, "HAINTMSK	 @0x%08lX : 0x%08X\n",
642 		(unsigned long)addr, dwc2_readl(hsotg, HAINTMSK));
643 	if (hsotg->params.dma_desc_enable) {
644 		addr = hsotg->regs + HFLBADDR;
645 		dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
646 			(unsigned long)addr, dwc2_readl(hsotg, HFLBADDR));
647 	}
648 
649 	addr = hsotg->regs + HPRT0;
650 	dev_dbg(hsotg->dev, "HPRT0	 @0x%08lX : 0x%08X\n",
651 		(unsigned long)addr, dwc2_readl(hsotg, HPRT0));
652 
653 	for (i = 0; i < hsotg->params.host_channels; i++) {
654 		dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
655 		addr = hsotg->regs + HCCHAR(i);
656 		dev_dbg(hsotg->dev, "HCCHAR	 @0x%08lX : 0x%08X\n",
657 			(unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i)));
658 		addr = hsotg->regs + HCSPLT(i);
659 		dev_dbg(hsotg->dev, "HCSPLT	 @0x%08lX : 0x%08X\n",
660 			(unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i)));
661 		addr = hsotg->regs + HCINT(i);
662 		dev_dbg(hsotg->dev, "HCINT	 @0x%08lX : 0x%08X\n",
663 			(unsigned long)addr, dwc2_readl(hsotg, HCINT(i)));
664 		addr = hsotg->regs + HCINTMSK(i);
665 		dev_dbg(hsotg->dev, "HCINTMSK	 @0x%08lX : 0x%08X\n",
666 			(unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i)));
667 		addr = hsotg->regs + HCTSIZ(i);
668 		dev_dbg(hsotg->dev, "HCTSIZ	 @0x%08lX : 0x%08X\n",
669 			(unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i)));
670 		addr = hsotg->regs + HCDMA(i);
671 		dev_dbg(hsotg->dev, "HCDMA	 @0x%08lX : 0x%08X\n",
672 			(unsigned long)addr, dwc2_readl(hsotg, HCDMA(i)));
673 		if (hsotg->params.dma_desc_enable) {
674 			addr = hsotg->regs + HCDMAB(i);
675 			dev_dbg(hsotg->dev, "HCDMAB	 @0x%08lX : 0x%08X\n",
676 				(unsigned long)addr, dwc2_readl(hsotg,
677 								HCDMAB(i)));
678 		}
679 	}
680 #endif
681 }
682 
683 /**
684  * dwc2_dump_global_registers() - Prints the core global registers
685  *
686  * @hsotg: Programming view of DWC_otg controller
687  *
688  * NOTE: This function will be removed once the peripheral controller code
689  * is integrated and the driver is stable
690  */
691 void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
692 {
693 #ifdef DEBUG
694 	u32 __iomem *addr;
695 
696 	dev_dbg(hsotg->dev, "Core Global Registers\n");
697 	addr = hsotg->regs + GOTGCTL;
698 	dev_dbg(hsotg->dev, "GOTGCTL	 @0x%08lX : 0x%08X\n",
699 		(unsigned long)addr, dwc2_readl(hsotg, GOTGCTL));
700 	addr = hsotg->regs + GOTGINT;
701 	dev_dbg(hsotg->dev, "GOTGINT	 @0x%08lX : 0x%08X\n",
702 		(unsigned long)addr, dwc2_readl(hsotg, GOTGINT));
703 	addr = hsotg->regs + GAHBCFG;
704 	dev_dbg(hsotg->dev, "GAHBCFG	 @0x%08lX : 0x%08X\n",
705 		(unsigned long)addr, dwc2_readl(hsotg, GAHBCFG));
706 	addr = hsotg->regs + GUSBCFG;
707 	dev_dbg(hsotg->dev, "GUSBCFG	 @0x%08lX : 0x%08X\n",
708 		(unsigned long)addr, dwc2_readl(hsotg, GUSBCFG));
709 	addr = hsotg->regs + GRSTCTL;
710 	dev_dbg(hsotg->dev, "GRSTCTL	 @0x%08lX : 0x%08X\n",
711 		(unsigned long)addr, dwc2_readl(hsotg, GRSTCTL));
712 	addr = hsotg->regs + GINTSTS;
713 	dev_dbg(hsotg->dev, "GINTSTS	 @0x%08lX : 0x%08X\n",
714 		(unsigned long)addr, dwc2_readl(hsotg, GINTSTS));
715 	addr = hsotg->regs + GINTMSK;
716 	dev_dbg(hsotg->dev, "GINTMSK	 @0x%08lX : 0x%08X\n",
717 		(unsigned long)addr, dwc2_readl(hsotg, GINTMSK));
718 	addr = hsotg->regs + GRXSTSR;
719 	dev_dbg(hsotg->dev, "GRXSTSR	 @0x%08lX : 0x%08X\n",
720 		(unsigned long)addr, dwc2_readl(hsotg, GRXSTSR));
721 	addr = hsotg->regs + GRXFSIZ;
722 	dev_dbg(hsotg->dev, "GRXFSIZ	 @0x%08lX : 0x%08X\n",
723 		(unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ));
724 	addr = hsotg->regs + GNPTXFSIZ;
725 	dev_dbg(hsotg->dev, "GNPTXFSIZ	 @0x%08lX : 0x%08X\n",
726 		(unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ));
727 	addr = hsotg->regs + GNPTXSTS;
728 	dev_dbg(hsotg->dev, "GNPTXSTS	 @0x%08lX : 0x%08X\n",
729 		(unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS));
730 	addr = hsotg->regs + GI2CCTL;
731 	dev_dbg(hsotg->dev, "GI2CCTL	 @0x%08lX : 0x%08X\n",
732 		(unsigned long)addr, dwc2_readl(hsotg, GI2CCTL));
733 	addr = hsotg->regs + GPVNDCTL;
734 	dev_dbg(hsotg->dev, "GPVNDCTL	 @0x%08lX : 0x%08X\n",
735 		(unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL));
736 	addr = hsotg->regs + GGPIO;
737 	dev_dbg(hsotg->dev, "GGPIO	 @0x%08lX : 0x%08X\n",
738 		(unsigned long)addr, dwc2_readl(hsotg, GGPIO));
739 	addr = hsotg->regs + GUID;
740 	dev_dbg(hsotg->dev, "GUID	 @0x%08lX : 0x%08X\n",
741 		(unsigned long)addr, dwc2_readl(hsotg, GUID));
742 	addr = hsotg->regs + GSNPSID;
743 	dev_dbg(hsotg->dev, "GSNPSID	 @0x%08lX : 0x%08X\n",
744 		(unsigned long)addr, dwc2_readl(hsotg, GSNPSID));
745 	addr = hsotg->regs + GHWCFG1;
746 	dev_dbg(hsotg->dev, "GHWCFG1	 @0x%08lX : 0x%08X\n",
747 		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG1));
748 	addr = hsotg->regs + GHWCFG2;
749 	dev_dbg(hsotg->dev, "GHWCFG2	 @0x%08lX : 0x%08X\n",
750 		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG2));
751 	addr = hsotg->regs + GHWCFG3;
752 	dev_dbg(hsotg->dev, "GHWCFG3	 @0x%08lX : 0x%08X\n",
753 		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG3));
754 	addr = hsotg->regs + GHWCFG4;
755 	dev_dbg(hsotg->dev, "GHWCFG4	 @0x%08lX : 0x%08X\n",
756 		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG4));
757 	addr = hsotg->regs + GLPMCFG;
758 	dev_dbg(hsotg->dev, "GLPMCFG	 @0x%08lX : 0x%08X\n",
759 		(unsigned long)addr, dwc2_readl(hsotg, GLPMCFG));
760 	addr = hsotg->regs + GPWRDN;
761 	dev_dbg(hsotg->dev, "GPWRDN	 @0x%08lX : 0x%08X\n",
762 		(unsigned long)addr, dwc2_readl(hsotg, GPWRDN));
763 	addr = hsotg->regs + GDFIFOCFG;
764 	dev_dbg(hsotg->dev, "GDFIFOCFG	 @0x%08lX : 0x%08X\n",
765 		(unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG));
766 	addr = hsotg->regs + HPTXFSIZ;
767 	dev_dbg(hsotg->dev, "HPTXFSIZ	 @0x%08lX : 0x%08X\n",
768 		(unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ));
769 
770 	addr = hsotg->regs + PCGCTL;
771 	dev_dbg(hsotg->dev, "PCGCTL	 @0x%08lX : 0x%08X\n",
772 		(unsigned long)addr, dwc2_readl(hsotg, PCGCTL));
773 #endif
774 }
775 
776 /**
777  * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
778  *
779  * @hsotg: Programming view of DWC_otg controller
780  * @num:   Tx FIFO to flush
781  */
782 void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
783 {
784 	u32 greset;
785 
786 	dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
787 
788 	/* Wait for AHB master IDLE state */
789 	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
790 		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
791 			 __func__);
792 
793 	greset = GRSTCTL_TXFFLSH;
794 	greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
795 	dwc2_writel(hsotg, greset, GRSTCTL);
796 
797 	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
798 		dev_warn(hsotg->dev, "%s:  HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
799 			 __func__);
800 
801 	/* Wait for at least 3 PHY Clocks */
802 	udelay(1);
803 }
804 
805 /**
806  * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
807  *
808  * @hsotg: Programming view of DWC_otg controller
809  */
810 void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
811 {
812 	u32 greset;
813 
814 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
815 
816 	/* Wait for AHB master IDLE state */
817 	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
818 		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
819 			 __func__);
820 
821 	greset = GRSTCTL_RXFFLSH;
822 	dwc2_writel(hsotg, greset, GRSTCTL);
823 
824 	/* Wait for RxFIFO flush done */
825 	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
826 		dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
827 			 __func__);
828 
829 	/* Wait for at least 3 PHY Clocks */
830 	udelay(1);
831 }
832 
833 bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
834 {
835 	if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff)
836 		return false;
837 	else
838 		return true;
839 }
840 
841 /**
842  * dwc2_enable_global_interrupts() - Enables the controller's Global
843  * Interrupt in the AHB Config register
844  *
845  * @hsotg: Programming view of DWC_otg controller
846  */
847 void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
848 {
849 	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
850 
851 	ahbcfg |= GAHBCFG_GLBL_INTR_EN;
852 	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
853 }
854 
855 /**
856  * dwc2_disable_global_interrupts() - Disables the controller's Global
857  * Interrupt in the AHB Config register
858  *
859  * @hsotg: Programming view of DWC_otg controller
860  */
861 void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
862 {
863 	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
864 
865 	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
866 	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
867 }
868 
869 /* Returns the controller's GHWCFG2.OTG_MODE. */
870 unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
871 {
872 	u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2);
873 
874 	return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
875 		GHWCFG2_OP_MODE_SHIFT;
876 }
877 
878 /* Returns true if the controller is capable of DRD. */
879 bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
880 {
881 	unsigned int op_mode = dwc2_op_mode(hsotg);
882 
883 	return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
884 		(op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
885 		(op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
886 }
887 
888 /* Returns true if the controller is host-only. */
889 bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
890 {
891 	unsigned int op_mode = dwc2_op_mode(hsotg);
892 
893 	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
894 		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
895 }
896 
897 /* Returns true if the controller is device-only. */
898 bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
899 {
900 	unsigned int op_mode = dwc2_op_mode(hsotg);
901 
902 	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
903 		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
904 }
905 
906 /**
907  * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
908  * @hsotg: Programming view of DWC_otg controller.
909  * @offset: Register's offset where bit/bits must be set.
910  * @mask: Mask of the bit/bits which must be set.
911  * @timeout: Timeout to wait.
912  *
913  * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
914  */
915 int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
916 			    u32 timeout)
917 {
918 	u32 i;
919 
920 	for (i = 0; i < timeout; i++) {
921 		if (dwc2_readl(hsotg, offset) & mask)
922 			return 0;
923 		udelay(1);
924 	}
925 
926 	return -ETIMEDOUT;
927 }
928 
929 /**
930  * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
931  * @hsotg: Programming view of DWC_otg controller.
932  * @offset: Register's offset where bit/bits must be set.
933  * @mask: Mask of the bit/bits which must be set.
934  * @timeout: Timeout to wait.
935  *
936  * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
937  */
938 int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
939 			      u32 timeout)
940 {
941 	u32 i;
942 
943 	for (i = 0; i < timeout; i++) {
944 		if (!(dwc2_readl(hsotg, offset) & mask))
945 			return 0;
946 		udelay(1);
947 	}
948 
949 	return -ETIMEDOUT;
950 }
951 
952 /*
953  * Initializes the FSLSPClkSel field of the HCFG register depending on the
954  * PHY type
955  */
956 void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
957 {
958 	u32 hcfg, val;
959 
960 	if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
961 	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
962 	     hsotg->params.ulpi_fs_ls) ||
963 	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
964 		/* Full speed PHY */
965 		val = HCFG_FSLSPCLKSEL_48_MHZ;
966 	} else {
967 		/* High speed PHY running at full speed or high speed */
968 		val = HCFG_FSLSPCLKSEL_30_60_MHZ;
969 	}
970 
971 	dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
972 	hcfg = dwc2_readl(hsotg, HCFG);
973 	hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
974 	hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
975 	dwc2_writel(hsotg, hcfg, HCFG);
976 }
977 
978 static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
979 {
980 	u32 usbcfg, ggpio, i2cctl;
981 	int retval = 0;
982 
983 	/*
984 	 * core_init() is now called on every switch so only call the
985 	 * following for the first time through
986 	 */
987 	if (select_phy) {
988 		dev_dbg(hsotg->dev, "FS PHY selected\n");
989 
990 		usbcfg = dwc2_readl(hsotg, GUSBCFG);
991 		if (!(usbcfg & GUSBCFG_PHYSEL)) {
992 			usbcfg |= GUSBCFG_PHYSEL;
993 			dwc2_writel(hsotg, usbcfg, GUSBCFG);
994 
995 			/* Reset after a PHY select */
996 			retval = dwc2_core_reset(hsotg, false);
997 
998 			if (retval) {
999 				dev_err(hsotg->dev,
1000 					"%s: Reset failed, aborting", __func__);
1001 				return retval;
1002 			}
1003 		}
1004 
1005 		if (hsotg->params.activate_stm_fs_transceiver) {
1006 			ggpio = dwc2_readl(hsotg, GGPIO);
1007 			if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
1008 				dev_dbg(hsotg->dev, "Activating transceiver\n");
1009 				/*
1010 				 * STM32F4x9 uses the GGPIO register as general
1011 				 * core configuration register.
1012 				 */
1013 				ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
1014 				dwc2_writel(hsotg, ggpio, GGPIO);
1015 			}
1016 		}
1017 	}
1018 
1019 	/*
1020 	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
1021 	 * do this on HNP Dev/Host mode switches (done in dev_init and
1022 	 * host_init).
1023 	 */
1024 	if (dwc2_is_host_mode(hsotg))
1025 		dwc2_init_fs_ls_pclk_sel(hsotg);
1026 
1027 	if (hsotg->params.i2c_enable) {
1028 		dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
1029 
1030 		/* Program GUSBCFG.OtgUtmiFsSel to I2C */
1031 		usbcfg = dwc2_readl(hsotg, GUSBCFG);
1032 		usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
1033 		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1034 
1035 		/* Program GI2CCTL.I2CEn */
1036 		i2cctl = dwc2_readl(hsotg, GI2CCTL);
1037 		i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
1038 		i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
1039 		i2cctl &= ~GI2CCTL_I2CEN;
1040 		dwc2_writel(hsotg, i2cctl, GI2CCTL);
1041 		i2cctl |= GI2CCTL_I2CEN;
1042 		dwc2_writel(hsotg, i2cctl, GI2CCTL);
1043 	}
1044 
1045 	return retval;
1046 }
1047 
1048 static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1049 {
1050 	u32 usbcfg, usbcfg_old;
1051 	int retval = 0;
1052 
1053 	if (!select_phy)
1054 		return 0;
1055 
1056 	usbcfg = dwc2_readl(hsotg, GUSBCFG);
1057 	usbcfg_old = usbcfg;
1058 
1059 	/*
1060 	 * HS PHY parameters. These parameters are preserved during soft reset
1061 	 * so only program the first time. Do a soft reset immediately after
1062 	 * setting phyif.
1063 	 */
1064 	switch (hsotg->params.phy_type) {
1065 	case DWC2_PHY_TYPE_PARAM_ULPI:
1066 		/* ULPI interface */
1067 		dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
1068 		usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
1069 		usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
1070 		if (hsotg->params.phy_ulpi_ddr)
1071 			usbcfg |= GUSBCFG_DDRSEL;
1072 
1073 		/* Set external VBUS indicator as needed. */
1074 		if (hsotg->params.oc_disable)
1075 			usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
1076 				   GUSBCFG_INDICATORPASSTHROUGH);
1077 		break;
1078 	case DWC2_PHY_TYPE_PARAM_UTMI:
1079 		/* UTMI+ interface */
1080 		dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
1081 		usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
1082 		if (hsotg->params.phy_utmi_width == 16)
1083 			usbcfg |= GUSBCFG_PHYIF16;
1084 		break;
1085 	default:
1086 		dev_err(hsotg->dev, "FS PHY selected at HS!\n");
1087 		break;
1088 	}
1089 
1090 	if (usbcfg != usbcfg_old) {
1091 		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1092 
1093 		/* Reset after setting the PHY parameters */
1094 		retval = dwc2_core_reset(hsotg, false);
1095 		if (retval) {
1096 			dev_err(hsotg->dev,
1097 				"%s: Reset failed, aborting", __func__);
1098 			return retval;
1099 		}
1100 	}
1101 
1102 	return retval;
1103 }
1104 
1105 static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
1106 {
1107 	u32 usbcfg;
1108 
1109 	if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI)
1110 		return;
1111 
1112 	usbcfg = dwc2_readl(hsotg, GUSBCFG);
1113 
1114 	usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
1115 	if (hsotg->params.phy_utmi_width == 16)
1116 		usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
1117 	else
1118 		usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
1119 
1120 	dwc2_writel(hsotg, usbcfg, GUSBCFG);
1121 }
1122 
1123 int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1124 {
1125 	u32 usbcfg;
1126 	u32 otgctl;
1127 	int retval = 0;
1128 
1129 	if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
1130 	     hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
1131 	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
1132 		/* If FS/LS mode with FS/LS PHY */
1133 		retval = dwc2_fs_phy_init(hsotg, select_phy);
1134 		if (retval)
1135 			return retval;
1136 	} else {
1137 		/* High speed PHY */
1138 		retval = dwc2_hs_phy_init(hsotg, select_phy);
1139 		if (retval)
1140 			return retval;
1141 
1142 		if (dwc2_is_device_mode(hsotg))
1143 			dwc2_set_turnaround_time(hsotg);
1144 	}
1145 
1146 	if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
1147 	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
1148 	    hsotg->params.ulpi_fs_ls) {
1149 		dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
1150 		usbcfg = dwc2_readl(hsotg, GUSBCFG);
1151 		usbcfg |= GUSBCFG_ULPI_FS_LS;
1152 		usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
1153 		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1154 	} else {
1155 		usbcfg = dwc2_readl(hsotg, GUSBCFG);
1156 		usbcfg &= ~GUSBCFG_ULPI_FS_LS;
1157 		usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
1158 		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1159 	}
1160 
1161 	if (!hsotg->params.activate_ingenic_overcurrent_detection) {
1162 		if (dwc2_is_host_mode(hsotg)) {
1163 			otgctl = readl(hsotg->regs + GOTGCTL);
1164 			otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
1165 			writel(otgctl, hsotg->regs + GOTGCTL);
1166 		}
1167 	}
1168 
1169 	return retval;
1170 }
1171 
1172 MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
1173 MODULE_AUTHOR("Synopsys, Inc.");
1174 MODULE_LICENSE("Dual BSD/GPL");
1175