1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * drivers/usb/generic.c - generic driver for USB devices (not interfaces) 4 * 5 * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de> 6 * 7 * based on drivers/usb/usb.c which had the following copyrights: 8 * (C) Copyright Linus Torvalds 1999 9 * (C) Copyright Johannes Erdfelt 1999-2001 10 * (C) Copyright Andreas Gal 1999 11 * (C) Copyright Gregory P. Smith 1999 12 * (C) Copyright Deti Fliegl 1999 (new USB architecture) 13 * (C) Copyright Randy Dunlap 2000 14 * (C) Copyright David Brownell 2000-2004 15 * (C) Copyright Yggdrasil Computing, Inc. 2000 16 * (usb_device_id matching changes by Adam J. Richter) 17 * (C) Copyright Greg Kroah-Hartman 2002-2003 18 * 19 * Released under the GPLv2 only. 20 */ 21 22 #include <linux/usb.h> 23 #include <linux/usb/hcd.h> 24 #include <uapi/linux/usb/audio.h> 25 #include "usb.h" 26 27 static inline const char *plural(int n) 28 { 29 return (n == 1 ? "" : "s"); 30 } 31 32 static int is_rndis(struct usb_interface_descriptor *desc) 33 { 34 return desc->bInterfaceClass == USB_CLASS_COMM 35 && desc->bInterfaceSubClass == 2 36 && desc->bInterfaceProtocol == 0xff; 37 } 38 39 static int is_activesync(struct usb_interface_descriptor *desc) 40 { 41 return desc->bInterfaceClass == USB_CLASS_MISC 42 && desc->bInterfaceSubClass == 1 43 && desc->bInterfaceProtocol == 1; 44 } 45 46 static bool is_audio(struct usb_interface_descriptor *desc) 47 { 48 return desc->bInterfaceClass == USB_CLASS_AUDIO; 49 } 50 51 static bool is_uac3_config(struct usb_interface_descriptor *desc) 52 { 53 return desc->bInterfaceProtocol == UAC_VERSION_3; 54 } 55 56 int usb_choose_configuration(struct usb_device *udev) 57 { 58 int i; 59 int num_configs; 60 int insufficient_power = 0; 61 struct usb_host_config *c, *best; 62 63 if (usb_device_is_owned(udev)) 64 return 0; 65 66 best = NULL; 67 c = udev->config; 68 num_configs = udev->descriptor.bNumConfigurations; 69 for (i = 0; i < num_configs; (i++, c++)) { 70 struct usb_interface_descriptor *desc = NULL; 71 72 /* It's possible that a config has no interfaces! */ 73 if (c->desc.bNumInterfaces > 0) 74 desc = &c->intf_cache[0]->altsetting->desc; 75 76 /* 77 * HP's USB bus-powered keyboard has only one configuration 78 * and it claims to be self-powered; other devices may have 79 * similar errors in their descriptors. If the next test 80 * were allowed to execute, such configurations would always 81 * be rejected and the devices would not work as expected. 82 * In the meantime, we run the risk of selecting a config 83 * that requires external power at a time when that power 84 * isn't available. It seems to be the lesser of two evils. 85 * 86 * Bugzilla #6448 reports a device that appears to crash 87 * when it receives a GET_DEVICE_STATUS request! We don't 88 * have any other way to tell whether a device is self-powered, 89 * but since we don't use that information anywhere but here, 90 * the call has been removed. 91 * 92 * Maybe the GET_DEVICE_STATUS call and the test below can 93 * be reinstated when device firmwares become more reliable. 94 * Don't hold your breath. 95 */ 96 #if 0 97 /* Rule out self-powered configs for a bus-powered device */ 98 if (bus_powered && (c->desc.bmAttributes & 99 USB_CONFIG_ATT_SELFPOWER)) 100 continue; 101 #endif 102 103 /* 104 * The next test may not be as effective as it should be. 105 * Some hubs have errors in their descriptor, claiming 106 * to be self-powered when they are really bus-powered. 107 * We will overestimate the amount of current such hubs 108 * make available for each port. 109 * 110 * This is a fairly benign sort of failure. It won't 111 * cause us to reject configurations that we should have 112 * accepted. 113 */ 114 115 /* Rule out configs that draw too much bus current */ 116 if (usb_get_max_power(udev, c) > udev->bus_mA) { 117 insufficient_power++; 118 continue; 119 } 120 121 /* 122 * Select first configuration as default for audio so that 123 * devices that don't comply with UAC3 protocol are supported. 124 * But, still iterate through other configurations and 125 * select UAC3 compliant config if present. 126 */ 127 if (desc && is_audio(desc)) { 128 /* Always prefer the first found UAC3 config */ 129 if (is_uac3_config(desc)) { 130 best = c; 131 break; 132 } 133 134 /* If there is no UAC3 config, prefer the first config */ 135 else if (i == 0) 136 best = c; 137 138 /* Unconditional continue, because the rest of the code 139 * in the loop is irrelevant for audio devices, and 140 * because it can reassign best, which for audio devices 141 * we don't want. 142 */ 143 continue; 144 } 145 146 /* When the first config's first interface is one of Microsoft's 147 * pet nonstandard Ethernet-over-USB protocols, ignore it unless 148 * this kernel has enabled the necessary host side driver. 149 * But: Don't ignore it if it's the only config. 150 */ 151 if (i == 0 && num_configs > 1 && desc && 152 (is_rndis(desc) || is_activesync(desc))) { 153 #if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE) 154 continue; 155 #else 156 best = c; 157 #endif 158 } 159 160 /* From the remaining configs, choose the first one whose 161 * first interface is for a non-vendor-specific class. 162 * Reason: Linux is more likely to have a class driver 163 * than a vendor-specific driver. */ 164 else if (udev->descriptor.bDeviceClass != 165 USB_CLASS_VENDOR_SPEC && 166 (desc && desc->bInterfaceClass != 167 USB_CLASS_VENDOR_SPEC)) { 168 best = c; 169 break; 170 } 171 172 /* If all the remaining configs are vendor-specific, 173 * choose the first one. */ 174 else if (!best) 175 best = c; 176 } 177 178 if (insufficient_power > 0) 179 dev_info(&udev->dev, "rejected %d configuration%s " 180 "due to insufficient available bus power\n", 181 insufficient_power, plural(insufficient_power)); 182 183 if (best) { 184 i = best->desc.bConfigurationValue; 185 dev_dbg(&udev->dev, 186 "configuration #%d chosen from %d choice%s\n", 187 i, num_configs, plural(num_configs)); 188 } else { 189 i = -1; 190 dev_warn(&udev->dev, 191 "no configuration chosen from %d choice%s\n", 192 num_configs, plural(num_configs)); 193 } 194 return i; 195 } 196 EXPORT_SYMBOL_GPL(usb_choose_configuration); 197 198 static int generic_probe(struct usb_device *udev) 199 { 200 int err, c; 201 202 /* Choose and set the configuration. This registers the interfaces 203 * with the driver core and lets interface drivers bind to them. 204 */ 205 if (udev->authorized == 0) 206 dev_err(&udev->dev, "Device is not authorized for usage\n"); 207 else { 208 c = usb_choose_configuration(udev); 209 if (c >= 0) { 210 err = usb_set_configuration(udev, c); 211 if (err && err != -ENODEV) { 212 dev_err(&udev->dev, "can't set config #%d, error %d\n", 213 c, err); 214 /* This need not be fatal. The user can try to 215 * set other configurations. */ 216 } 217 } 218 } 219 /* USB device state == configured ... usable */ 220 usb_notify_add_device(udev); 221 222 return 0; 223 } 224 225 static void generic_disconnect(struct usb_device *udev) 226 { 227 usb_notify_remove_device(udev); 228 229 /* if this is only an unbind, not a physical disconnect, then 230 * unconfigure the device */ 231 if (udev->actconfig) 232 usb_set_configuration(udev, -1); 233 } 234 235 #ifdef CONFIG_PM 236 237 static int generic_suspend(struct usb_device *udev, pm_message_t msg) 238 { 239 int rc; 240 241 /* Normal USB devices suspend through their upstream port. 242 * Root hubs don't have upstream ports to suspend, 243 * so we have to shut down their downstream HC-to-USB 244 * interfaces manually by doing a bus (or "global") suspend. 245 */ 246 if (!udev->parent) 247 rc = hcd_bus_suspend(udev, msg); 248 249 /* 250 * Non-root USB2 devices don't need to do anything for FREEZE 251 * or PRETHAW. USB3 devices don't support global suspend and 252 * needs to be selectively suspended. 253 */ 254 else if ((msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW) 255 && (udev->speed < USB_SPEED_SUPER)) 256 rc = 0; 257 else 258 rc = usb_port_suspend(udev, msg); 259 260 if (rc == 0) 261 usbfs_notify_suspend(udev); 262 return rc; 263 } 264 265 static int generic_resume(struct usb_device *udev, pm_message_t msg) 266 { 267 int rc; 268 269 /* Normal USB devices resume/reset through their upstream port. 270 * Root hubs don't have upstream ports to resume or reset, 271 * so we have to start up their downstream HC-to-USB 272 * interfaces manually by doing a bus (or "global") resume. 273 */ 274 if (!udev->parent) 275 rc = hcd_bus_resume(udev, msg); 276 else 277 rc = usb_port_resume(udev, msg); 278 279 if (rc == 0) 280 usbfs_notify_resume(udev); 281 return rc; 282 } 283 284 #endif /* CONFIG_PM */ 285 286 struct usb_device_driver usb_generic_driver = { 287 .name = "usb", 288 .probe = generic_probe, 289 .disconnect = generic_disconnect, 290 #ifdef CONFIG_PM 291 .suspend = generic_suspend, 292 .resume = generic_resume, 293 #endif 294 .supports_autosuspend = 1, 295 }; 296