1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * usblp.c 4 * 5 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com> 6 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> 7 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net> 8 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> 9 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com> 10 # Copyright (c) 2001 David Paschal <paschal@rcsis.com> 11 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name> 12 * 13 * USB Printer Device Class driver for USB printers and printer cables 14 * 15 * Sponsored by SuSE 16 * 17 * ChangeLog: 18 * v0.1 - thorough cleaning, URBification, almost a rewrite 19 * v0.2 - some more cleanups 20 * v0.3 - cleaner again, waitqueue fixes 21 * v0.4 - fixes in unidirectional mode 22 * v0.5 - add DEVICE_ID string support 23 * v0.6 - never time out 24 * v0.7 - fixed bulk-IN read and poll (David Paschal) 25 * v0.8 - add devfs support 26 * v0.9 - fix unplug-while-open paths 27 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org) 28 * v0.11 - add proto_bias option (Pete Zaitcev) 29 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal) 30 * v0.13 - alloc space for statusbuf (<status> not on stack); 31 * use usb_alloc_coherent() for read buf & write buf; 32 * none - Maintained in Linux kernel after v0.13 33 */ 34 35 #include <linux/module.h> 36 #include <linux/kernel.h> 37 #include <linux/sched/signal.h> 38 #include <linux/signal.h> 39 #include <linux/poll.h> 40 #include <linux/slab.h> 41 #include <linux/lp.h> 42 #include <linux/mutex.h> 43 #undef DEBUG 44 #include <linux/usb.h> 45 #include <linux/usb/ch9.h> 46 #include <linux/ratelimit.h> 47 48 /* 49 * Version Information 50 */ 51 #define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal" 52 #define DRIVER_DESC "USB Printer Device Class driver" 53 54 #define USBLP_BUF_SIZE 8192 55 #define USBLP_BUF_SIZE_IN 1024 56 #define USBLP_DEVICE_ID_SIZE 1024 57 58 /* ioctls: */ 59 #define IOCNR_GET_DEVICE_ID 1 60 #define IOCNR_GET_PROTOCOLS 2 61 #define IOCNR_SET_PROTOCOL 3 62 #define IOCNR_HP_SET_CHANNEL 4 63 #define IOCNR_GET_BUS_ADDRESS 5 64 #define IOCNR_GET_VID_PID 6 65 #define IOCNR_SOFT_RESET 7 66 /* Get device_id string: */ 67 #define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len) 68 /* The following ioctls were added for http://hpoj.sourceforge.net: 69 * Get two-int array: 70 * [0]=current protocol 71 * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 72 * 3=USB_CLASS_PRINTER/1/3), 73 * [1]=supported protocol mask (mask&(1<<n)!=0 means 74 * USB_CLASS_PRINTER/1/n supported): 75 */ 76 #define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len) 77 /* 78 * Set protocol 79 * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 80 * 3=USB_CLASS_PRINTER/1/3): 81 */ 82 #define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0) 83 /* Set channel number (HP Vendor-specific command): */ 84 #define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0) 85 /* Get two-int array: [0]=bus number, [1]=device address: */ 86 #define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len) 87 /* Get two-int array: [0]=vendor ID, [1]=product ID: */ 88 #define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len) 89 /* Perform class specific soft reset */ 90 #define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0); 91 92 /* 93 * A DEVICE_ID string may include the printer's serial number. 94 * It should end with a semi-colon (';'). 95 * An example from an HP 970C DeskJet printer is (this is one long string, 96 * with the serial number changed): 97 MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ; 98 */ 99 100 /* 101 * USB Printer Requests 102 */ 103 104 #define USBLP_REQ_GET_ID 0x00 105 #define USBLP_REQ_GET_STATUS 0x01 106 #define USBLP_REQ_RESET 0x02 107 #define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */ 108 109 #define USBLP_MINORS 16 110 #define USBLP_MINOR_BASE 0 111 112 #define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */ 113 114 #define USBLP_FIRST_PROTOCOL 1 115 #define USBLP_LAST_PROTOCOL 3 116 #define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1) 117 118 /* 119 * some arbitrary status buffer size; 120 * need a status buffer that is allocated via kmalloc(), not on stack 121 */ 122 #define STATUS_BUF_SIZE 8 123 124 /* 125 * Locks down the locking order: 126 * ->wmut locks wstatus. 127 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection, 128 * [rw]status. We only touch status when we know the side idle. 129 * ->lock locks what interrupt accesses. 130 */ 131 struct usblp { 132 struct usb_device *dev; /* USB device */ 133 struct mutex wmut; 134 struct mutex mut; 135 spinlock_t lock; /* locks rcomplete, wcomplete */ 136 char *readbuf; /* read transfer_buffer */ 137 char *statusbuf; /* status transfer_buffer */ 138 struct usb_anchor urbs; 139 wait_queue_head_t rwait, wwait; 140 int readcount; /* Counter for reads */ 141 int ifnum; /* Interface number */ 142 struct usb_interface *intf; /* The interface */ 143 /* 144 * Alternate-setting numbers and endpoints for each protocol 145 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports: 146 */ 147 struct { 148 int alt_setting; 149 struct usb_endpoint_descriptor *epwrite; 150 struct usb_endpoint_descriptor *epread; 151 } protocol[USBLP_MAX_PROTOCOLS]; 152 int current_protocol; 153 int minor; /* minor number of device */ 154 int wcomplete, rcomplete; 155 int wstatus; /* bytes written or error */ 156 int rstatus; /* bytes ready or error */ 157 unsigned int quirks; /* quirks flags */ 158 unsigned int flags; /* mode flags */ 159 unsigned char used; /* True if open */ 160 unsigned char present; /* True if not disconnected */ 161 unsigned char bidir; /* interface is bidirectional */ 162 unsigned char no_paper; /* Paper Out happened */ 163 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */ 164 /* first 2 bytes are (big-endian) length */ 165 }; 166 167 #ifdef DEBUG 168 static void usblp_dump(struct usblp *usblp) 169 { 170 struct device *dev = &usblp->intf->dev; 171 int p; 172 173 dev_dbg(dev, "usblp=0x%p\n", usblp); 174 dev_dbg(dev, "dev=0x%p\n", usblp->dev); 175 dev_dbg(dev, "present=%d\n", usblp->present); 176 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf); 177 dev_dbg(dev, "readcount=%d\n", usblp->readcount); 178 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum); 179 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) { 180 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p, 181 usblp->protocol[p].alt_setting); 182 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p, 183 usblp->protocol[p].epwrite); 184 dev_dbg(dev, "protocol[%d].epread=%p\n", p, 185 usblp->protocol[p].epread); 186 } 187 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol); 188 dev_dbg(dev, "minor=%d\n", usblp->minor); 189 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus); 190 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus); 191 dev_dbg(dev, "quirks=%d\n", usblp->quirks); 192 dev_dbg(dev, "used=%d\n", usblp->used); 193 dev_dbg(dev, "bidir=%d\n", usblp->bidir); 194 dev_dbg(dev, "device_id_string=\"%s\"\n", 195 usblp->device_id_string ? 196 usblp->device_id_string + 2 : 197 (unsigned char *)"(null)"); 198 } 199 #endif 200 201 /* Quirks: various printer quirks are handled by this table & its flags. */ 202 203 struct quirk_printer_struct { 204 __u16 vendorId; 205 __u16 productId; 206 unsigned int quirks; 207 }; 208 209 #define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */ 210 #define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */ 211 #define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */ 212 213 static const struct quirk_printer_struct quirk_printers[] = { 214 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */ 215 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */ 216 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */ 217 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ 218 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ 219 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ 220 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ 221 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ 222 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ 223 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ 224 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ 225 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ 226 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ 227 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ 228 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ 229 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ 230 { 0, 0 } 231 }; 232 233 static int usblp_wwait(struct usblp *usblp, int nonblock); 234 static int usblp_wtest(struct usblp *usblp, int nonblock); 235 static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock); 236 static int usblp_rtest(struct usblp *usblp, int nonblock); 237 static int usblp_submit_read(struct usblp *usblp); 238 static int usblp_select_alts(struct usblp *usblp); 239 static int usblp_set_protocol(struct usblp *usblp, int protocol); 240 static int usblp_cache_device_id_string(struct usblp *usblp); 241 242 /* forward reference to make our lives easier */ 243 static struct usb_driver usblp_driver; 244 static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */ 245 246 /* 247 * Functions for usblp control messages. 248 */ 249 250 static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len) 251 { 252 int retval; 253 int index = usblp->ifnum; 254 255 /* High byte has the interface index. 256 Low byte has the alternate setting. 257 */ 258 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) 259 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; 260 261 retval = usb_control_msg(usblp->dev, 262 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), 263 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT); 264 dev_dbg(&usblp->intf->dev, 265 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n", 266 request, !!dir, recip, value, index, len, retval); 267 return retval < 0 ? retval : 0; 268 } 269 270 #define usblp_read_status(usblp, status)\ 271 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1) 272 #define usblp_get_id(usblp, config, id, maxlen)\ 273 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen) 274 #define usblp_reset(usblp)\ 275 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0) 276 277 static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel) 278 { 279 u8 *buf; 280 int ret; 281 282 buf = kzalloc(1, GFP_KERNEL); 283 if (!buf) 284 return -ENOMEM; 285 286 ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, 287 USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, 288 channel, buf, 1); 289 if (ret == 0) 290 *new_channel = buf[0]; 291 292 kfree(buf); 293 294 return ret; 295 } 296 297 /* 298 * See the description for usblp_select_alts() below for the usage 299 * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in 300 * case of any trouble. 301 */ 302 static int proto_bias = -1; 303 304 /* 305 * URB callback. 306 */ 307 308 static void usblp_bulk_read(struct urb *urb) 309 { 310 struct usblp *usblp = urb->context; 311 int status = urb->status; 312 unsigned long flags; 313 314 if (usblp->present && usblp->used) { 315 if (status) 316 printk(KERN_WARNING "usblp%d: " 317 "nonzero read bulk status received: %d\n", 318 usblp->minor, status); 319 } 320 spin_lock_irqsave(&usblp->lock, flags); 321 if (status < 0) 322 usblp->rstatus = status; 323 else 324 usblp->rstatus = urb->actual_length; 325 usblp->rcomplete = 1; 326 wake_up(&usblp->rwait); 327 spin_unlock_irqrestore(&usblp->lock, flags); 328 329 usb_free_urb(urb); 330 } 331 332 static void usblp_bulk_write(struct urb *urb) 333 { 334 struct usblp *usblp = urb->context; 335 int status = urb->status; 336 unsigned long flags; 337 338 if (usblp->present && usblp->used) { 339 if (status) 340 printk(KERN_WARNING "usblp%d: " 341 "nonzero write bulk status received: %d\n", 342 usblp->minor, status); 343 } 344 spin_lock_irqsave(&usblp->lock, flags); 345 if (status < 0) 346 usblp->wstatus = status; 347 else 348 usblp->wstatus = urb->actual_length; 349 usblp->no_paper = 0; 350 usblp->wcomplete = 1; 351 wake_up(&usblp->wwait); 352 spin_unlock_irqrestore(&usblp->lock, flags); 353 354 usb_free_urb(urb); 355 } 356 357 /* 358 * Get and print printer errors. 359 */ 360 361 static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; 362 363 static int usblp_check_status(struct usblp *usblp, int err) 364 { 365 unsigned char status, newerr = 0; 366 int error; 367 368 mutex_lock(&usblp->mut); 369 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) { 370 mutex_unlock(&usblp->mut); 371 printk_ratelimited(KERN_ERR 372 "usblp%d: error %d reading printer status\n", 373 usblp->minor, error); 374 return 0; 375 } 376 status = *usblp->statusbuf; 377 mutex_unlock(&usblp->mut); 378 379 if (~status & LP_PERRORP) 380 newerr = 3; 381 if (status & LP_POUTPA) 382 newerr = 1; 383 if (~status & LP_PSELECD) 384 newerr = 2; 385 386 if (newerr != err) { 387 printk(KERN_INFO "usblp%d: %s\n", 388 usblp->minor, usblp_messages[newerr]); 389 } 390 391 return newerr; 392 } 393 394 static int handle_bidir(struct usblp *usblp) 395 { 396 if (usblp->bidir && usblp->used) { 397 if (usblp_submit_read(usblp) < 0) 398 return -EIO; 399 } 400 return 0; 401 } 402 403 /* 404 * File op functions. 405 */ 406 407 static int usblp_open(struct inode *inode, struct file *file) 408 { 409 int minor = iminor(inode); 410 struct usblp *usblp; 411 struct usb_interface *intf; 412 int retval; 413 414 if (minor < 0) 415 return -ENODEV; 416 417 mutex_lock(&usblp_mutex); 418 419 retval = -ENODEV; 420 intf = usb_find_interface(&usblp_driver, minor); 421 if (!intf) 422 goto out; 423 usblp = usb_get_intfdata(intf); 424 if (!usblp || !usblp->dev || !usblp->present) 425 goto out; 426 427 retval = -EBUSY; 428 if (usblp->used) 429 goto out; 430 431 /* 432 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons: 433 * - We do not want persistent state which close(2) does not clear 434 * - It is not used anyway, according to CUPS people 435 */ 436 437 retval = usb_autopm_get_interface(intf); 438 if (retval < 0) 439 goto out; 440 usblp->used = 1; 441 file->private_data = usblp; 442 443 usblp->wcomplete = 1; /* we begin writeable */ 444 usblp->wstatus = 0; 445 usblp->rcomplete = 0; 446 447 if (handle_bidir(usblp) < 0) { 448 usb_autopm_put_interface(intf); 449 usblp->used = 0; 450 file->private_data = NULL; 451 retval = -EIO; 452 } 453 out: 454 mutex_unlock(&usblp_mutex); 455 return retval; 456 } 457 458 static void usblp_cleanup(struct usblp *usblp) 459 { 460 printk(KERN_INFO "usblp%d: removed\n", usblp->minor); 461 462 kfree(usblp->readbuf); 463 kfree(usblp->device_id_string); 464 kfree(usblp->statusbuf); 465 usb_put_intf(usblp->intf); 466 kfree(usblp); 467 } 468 469 static void usblp_unlink_urbs(struct usblp *usblp) 470 { 471 usb_kill_anchored_urbs(&usblp->urbs); 472 } 473 474 static int usblp_release(struct inode *inode, struct file *file) 475 { 476 struct usblp *usblp = file->private_data; 477 478 usblp->flags &= ~LP_ABORT; 479 480 mutex_lock(&usblp_mutex); 481 usblp->used = 0; 482 if (usblp->present) 483 usblp_unlink_urbs(usblp); 484 485 usb_autopm_put_interface(usblp->intf); 486 487 if (!usblp->present) /* finish cleanup from disconnect */ 488 usblp_cleanup(usblp); /* any URBs must be dead */ 489 490 mutex_unlock(&usblp_mutex); 491 return 0; 492 } 493 494 /* No kernel lock - fine */ 495 static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait) 496 { 497 struct usblp *usblp = file->private_data; 498 __poll_t ret = 0; 499 unsigned long flags; 500 501 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */ 502 poll_wait(file, &usblp->rwait, wait); 503 poll_wait(file, &usblp->wwait, wait); 504 505 mutex_lock(&usblp->mut); 506 if (!usblp->present) 507 ret |= EPOLLHUP; 508 mutex_unlock(&usblp->mut); 509 510 spin_lock_irqsave(&usblp->lock, flags); 511 if (usblp->bidir && usblp->rcomplete) 512 ret |= EPOLLIN | EPOLLRDNORM; 513 if (usblp->no_paper || usblp->wcomplete) 514 ret |= EPOLLOUT | EPOLLWRNORM; 515 spin_unlock_irqrestore(&usblp->lock, flags); 516 return ret; 517 } 518 519 static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 520 { 521 struct usblp *usblp = file->private_data; 522 int length, err, i; 523 unsigned char newChannel; 524 int status; 525 int twoints[2]; 526 int retval = 0; 527 528 mutex_lock(&usblp->mut); 529 if (!usblp->present) { 530 retval = -ENODEV; 531 goto done; 532 } 533 534 dev_dbg(&usblp->intf->dev, 535 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd, 536 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); 537 538 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ 539 540 switch (_IOC_NR(cmd)) { 541 542 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ 543 if (_IOC_DIR(cmd) != _IOC_READ) { 544 retval = -EINVAL; 545 goto done; 546 } 547 548 length = usblp_cache_device_id_string(usblp); 549 if (length < 0) { 550 retval = length; 551 goto done; 552 } 553 if (length > _IOC_SIZE(cmd)) 554 length = _IOC_SIZE(cmd); /* truncate */ 555 556 if (copy_to_user((void __user *) arg, 557 usblp->device_id_string, 558 (unsigned long) length)) { 559 retval = -EFAULT; 560 goto done; 561 } 562 563 break; 564 565 case IOCNR_GET_PROTOCOLS: 566 if (_IOC_DIR(cmd) != _IOC_READ || 567 _IOC_SIZE(cmd) < sizeof(twoints)) { 568 retval = -EINVAL; 569 goto done; 570 } 571 572 twoints[0] = usblp->current_protocol; 573 twoints[1] = 0; 574 for (i = USBLP_FIRST_PROTOCOL; 575 i <= USBLP_LAST_PROTOCOL; i++) { 576 if (usblp->protocol[i].alt_setting >= 0) 577 twoints[1] |= (1<<i); 578 } 579 580 if (copy_to_user((void __user *)arg, 581 (unsigned char *)twoints, 582 sizeof(twoints))) { 583 retval = -EFAULT; 584 goto done; 585 } 586 587 break; 588 589 case IOCNR_SET_PROTOCOL: 590 if (_IOC_DIR(cmd) != _IOC_WRITE) { 591 retval = -EINVAL; 592 goto done; 593 } 594 595 #ifdef DEBUG 596 if (arg == -10) { 597 usblp_dump(usblp); 598 break; 599 } 600 #endif 601 602 usblp_unlink_urbs(usblp); 603 retval = usblp_set_protocol(usblp, arg); 604 if (retval < 0) { 605 usblp_set_protocol(usblp, 606 usblp->current_protocol); 607 } 608 break; 609 610 case IOCNR_HP_SET_CHANNEL: 611 if (_IOC_DIR(cmd) != _IOC_WRITE || 612 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || 613 usblp->quirks & USBLP_QUIRK_BIDIR) { 614 retval = -EINVAL; 615 goto done; 616 } 617 618 err = usblp_hp_channel_change_request(usblp, 619 arg, &newChannel); 620 if (err < 0) { 621 dev_err(&usblp->dev->dev, 622 "usblp%d: error = %d setting " 623 "HP channel\n", 624 usblp->minor, err); 625 retval = -EIO; 626 goto done; 627 } 628 629 dev_dbg(&usblp->intf->dev, 630 "usblp%d requested/got HP channel %ld/%d\n", 631 usblp->minor, arg, newChannel); 632 break; 633 634 case IOCNR_GET_BUS_ADDRESS: 635 if (_IOC_DIR(cmd) != _IOC_READ || 636 _IOC_SIZE(cmd) < sizeof(twoints)) { 637 retval = -EINVAL; 638 goto done; 639 } 640 641 twoints[0] = usblp->dev->bus->busnum; 642 twoints[1] = usblp->dev->devnum; 643 if (copy_to_user((void __user *)arg, 644 (unsigned char *)twoints, 645 sizeof(twoints))) { 646 retval = -EFAULT; 647 goto done; 648 } 649 650 dev_dbg(&usblp->intf->dev, 651 "usblp%d is bus=%d, device=%d\n", 652 usblp->minor, twoints[0], twoints[1]); 653 break; 654 655 case IOCNR_GET_VID_PID: 656 if (_IOC_DIR(cmd) != _IOC_READ || 657 _IOC_SIZE(cmd) < sizeof(twoints)) { 658 retval = -EINVAL; 659 goto done; 660 } 661 662 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); 663 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); 664 if (copy_to_user((void __user *)arg, 665 (unsigned char *)twoints, 666 sizeof(twoints))) { 667 retval = -EFAULT; 668 goto done; 669 } 670 671 dev_dbg(&usblp->intf->dev, 672 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n", 673 usblp->minor, twoints[0], twoints[1]); 674 break; 675 676 case IOCNR_SOFT_RESET: 677 if (_IOC_DIR(cmd) != _IOC_NONE) { 678 retval = -EINVAL; 679 goto done; 680 } 681 retval = usblp_reset(usblp); 682 break; 683 default: 684 retval = -ENOTTY; 685 } 686 else /* old-style ioctl value */ 687 switch (cmd) { 688 689 case LPGETSTATUS: 690 retval = usblp_read_status(usblp, usblp->statusbuf); 691 if (retval) { 692 printk_ratelimited(KERN_ERR "usblp%d:" 693 "failed reading printer status (%d)\n", 694 usblp->minor, retval); 695 retval = -EIO; 696 goto done; 697 } 698 status = *usblp->statusbuf; 699 if (copy_to_user((void __user *)arg, &status, sizeof(int))) 700 retval = -EFAULT; 701 break; 702 703 case LPABORT: 704 if (arg) 705 usblp->flags |= LP_ABORT; 706 else 707 usblp->flags &= ~LP_ABORT; 708 break; 709 710 default: 711 retval = -ENOTTY; 712 } 713 714 done: 715 mutex_unlock(&usblp->mut); 716 return retval; 717 } 718 719 static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length) 720 { 721 struct urb *urb; 722 char *writebuf; 723 724 writebuf = kmalloc(transfer_length, GFP_KERNEL); 725 if (writebuf == NULL) 726 return NULL; 727 urb = usb_alloc_urb(0, GFP_KERNEL); 728 if (urb == NULL) { 729 kfree(writebuf); 730 return NULL; 731 } 732 733 usb_fill_bulk_urb(urb, usblp->dev, 734 usb_sndbulkpipe(usblp->dev, 735 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress), 736 writebuf, transfer_length, usblp_bulk_write, usblp); 737 urb->transfer_flags |= URB_FREE_BUFFER; 738 739 return urb; 740 } 741 742 static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) 743 { 744 struct usblp *usblp = file->private_data; 745 struct urb *writeurb; 746 int rv; 747 int transfer_length; 748 ssize_t writecount = 0; 749 750 if (mutex_lock_interruptible(&usblp->wmut)) { 751 rv = -EINTR; 752 goto raise_biglock; 753 } 754 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0) 755 goto raise_wait; 756 757 while (writecount < count) { 758 /* 759 * Step 1: Submit next block. 760 */ 761 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE) 762 transfer_length = USBLP_BUF_SIZE; 763 764 rv = -ENOMEM; 765 writeurb = usblp_new_writeurb(usblp, transfer_length); 766 if (writeurb == NULL) 767 goto raise_urb; 768 usb_anchor_urb(writeurb, &usblp->urbs); 769 770 if (copy_from_user(writeurb->transfer_buffer, 771 buffer + writecount, transfer_length)) { 772 rv = -EFAULT; 773 goto raise_badaddr; 774 } 775 776 spin_lock_irq(&usblp->lock); 777 usblp->wcomplete = 0; 778 spin_unlock_irq(&usblp->lock); 779 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) { 780 usblp->wstatus = 0; 781 spin_lock_irq(&usblp->lock); 782 usblp->no_paper = 0; 783 usblp->wcomplete = 1; 784 wake_up(&usblp->wwait); 785 spin_unlock_irq(&usblp->lock); 786 if (rv != -ENOMEM) 787 rv = -EIO; 788 goto raise_submit; 789 } 790 791 /* 792 * Step 2: Wait for transfer to end, collect results. 793 */ 794 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK)); 795 if (rv < 0) { 796 if (rv == -EAGAIN) { 797 /* Presume that it's going to complete well. */ 798 writecount += transfer_length; 799 } 800 if (rv == -ENOSPC) { 801 spin_lock_irq(&usblp->lock); 802 usblp->no_paper = 1; /* Mark for poll(2) */ 803 spin_unlock_irq(&usblp->lock); 804 writecount += transfer_length; 805 } 806 /* Leave URB dangling, to be cleaned on close. */ 807 goto collect_error; 808 } 809 810 if (usblp->wstatus < 0) { 811 rv = -EIO; 812 goto collect_error; 813 } 814 /* 815 * This is critical: it must be our URB, not other writer's. 816 * The wmut exists mainly to cover us here. 817 */ 818 writecount += usblp->wstatus; 819 } 820 821 mutex_unlock(&usblp->wmut); 822 return writecount; 823 824 raise_submit: 825 raise_badaddr: 826 usb_unanchor_urb(writeurb); 827 usb_free_urb(writeurb); 828 raise_urb: 829 raise_wait: 830 collect_error: /* Out of raise sequence */ 831 mutex_unlock(&usblp->wmut); 832 raise_biglock: 833 return writecount ? writecount : rv; 834 } 835 836 /* 837 * Notice that we fail to restart in a few cases: on EFAULT, on restart 838 * error, etc. This is the historical behaviour. In all such cases we return 839 * EIO, and applications loop in order to get the new read going. 840 */ 841 static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos) 842 { 843 struct usblp *usblp = file->private_data; 844 ssize_t count; 845 ssize_t avail; 846 int rv; 847 848 if (!usblp->bidir) 849 return -EINVAL; 850 851 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK)); 852 if (rv < 0) 853 return rv; 854 855 if (!usblp->present) { 856 count = -ENODEV; 857 goto done; 858 } 859 860 if ((avail = usblp->rstatus) < 0) { 861 printk(KERN_ERR "usblp%d: error %d reading from printer\n", 862 usblp->minor, (int)avail); 863 usblp_submit_read(usblp); 864 count = -EIO; 865 goto done; 866 } 867 868 count = len < avail - usblp->readcount ? len : avail - usblp->readcount; 869 if (count != 0 && 870 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) { 871 count = -EFAULT; 872 goto done; 873 } 874 875 if ((usblp->readcount += count) == avail) { 876 if (usblp_submit_read(usblp) < 0) { 877 /* We don't want to leak USB return codes into errno. */ 878 if (count == 0) 879 count = -EIO; 880 goto done; 881 } 882 } 883 884 done: 885 mutex_unlock(&usblp->mut); 886 return count; 887 } 888 889 /* 890 * Wait for the write path to come idle. 891 * This is called under the ->wmut, so the idle path stays idle. 892 * 893 * Our write path has a peculiar property: it does not buffer like a tty, 894 * but waits for the write to succeed. This allows our ->release to bug out 895 * without waiting for writes to drain. But it obviously does not work 896 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use 897 * select(2) or poll(2) to wait for the buffer to drain before closing. 898 * Alternatively, set blocking mode with fcntl and issue a zero-size write. 899 */ 900 static int usblp_wwait(struct usblp *usblp, int nonblock) 901 { 902 DECLARE_WAITQUEUE(waita, current); 903 int rc; 904 int err = 0; 905 906 add_wait_queue(&usblp->wwait, &waita); 907 for (;;) { 908 if (mutex_lock_interruptible(&usblp->mut)) { 909 rc = -EINTR; 910 break; 911 } 912 set_current_state(TASK_INTERRUPTIBLE); 913 rc = usblp_wtest(usblp, nonblock); 914 mutex_unlock(&usblp->mut); 915 if (rc <= 0) 916 break; 917 918 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) { 919 if (usblp->flags & LP_ABORT) { 920 err = usblp_check_status(usblp, err); 921 if (err == 1) { /* Paper out */ 922 rc = -ENOSPC; 923 break; 924 } 925 } else { 926 /* Prod the printer, Gentoo#251237. */ 927 mutex_lock(&usblp->mut); 928 usblp_read_status(usblp, usblp->statusbuf); 929 mutex_unlock(&usblp->mut); 930 } 931 } 932 } 933 set_current_state(TASK_RUNNING); 934 remove_wait_queue(&usblp->wwait, &waita); 935 return rc; 936 } 937 938 static int usblp_wtest(struct usblp *usblp, int nonblock) 939 { 940 unsigned long flags; 941 942 if (!usblp->present) 943 return -ENODEV; 944 if (signal_pending(current)) 945 return -EINTR; 946 spin_lock_irqsave(&usblp->lock, flags); 947 if (usblp->wcomplete) { 948 spin_unlock_irqrestore(&usblp->lock, flags); 949 return 0; 950 } 951 spin_unlock_irqrestore(&usblp->lock, flags); 952 if (nonblock) 953 return -EAGAIN; 954 return 1; 955 } 956 957 /* 958 * Wait for read bytes to become available. This probably should have been 959 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional 960 * name for functions which lock and return. 961 * 962 * We do not use wait_event_interruptible because it makes locking iffy. 963 */ 964 static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock) 965 { 966 DECLARE_WAITQUEUE(waita, current); 967 int rc; 968 969 add_wait_queue(&usblp->rwait, &waita); 970 for (;;) { 971 if (mutex_lock_interruptible(&usblp->mut)) { 972 rc = -EINTR; 973 break; 974 } 975 set_current_state(TASK_INTERRUPTIBLE); 976 if ((rc = usblp_rtest(usblp, nonblock)) < 0) { 977 mutex_unlock(&usblp->mut); 978 break; 979 } 980 if (rc == 0) /* Keep it locked */ 981 break; 982 mutex_unlock(&usblp->mut); 983 schedule(); 984 } 985 set_current_state(TASK_RUNNING); 986 remove_wait_queue(&usblp->rwait, &waita); 987 return rc; 988 } 989 990 static int usblp_rtest(struct usblp *usblp, int nonblock) 991 { 992 unsigned long flags; 993 994 if (!usblp->present) 995 return -ENODEV; 996 if (signal_pending(current)) 997 return -EINTR; 998 spin_lock_irqsave(&usblp->lock, flags); 999 if (usblp->rcomplete) { 1000 spin_unlock_irqrestore(&usblp->lock, flags); 1001 return 0; 1002 } 1003 spin_unlock_irqrestore(&usblp->lock, flags); 1004 if (nonblock) 1005 return -EAGAIN; 1006 return 1; 1007 } 1008 1009 /* 1010 * Please check ->bidir and other such things outside for now. 1011 */ 1012 static int usblp_submit_read(struct usblp *usblp) 1013 { 1014 struct urb *urb; 1015 unsigned long flags; 1016 int rc; 1017 1018 rc = -ENOMEM; 1019 urb = usb_alloc_urb(0, GFP_KERNEL); 1020 if (urb == NULL) 1021 goto raise_urb; 1022 1023 usb_fill_bulk_urb(urb, usblp->dev, 1024 usb_rcvbulkpipe(usblp->dev, 1025 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress), 1026 usblp->readbuf, USBLP_BUF_SIZE_IN, 1027 usblp_bulk_read, usblp); 1028 usb_anchor_urb(urb, &usblp->urbs); 1029 1030 spin_lock_irqsave(&usblp->lock, flags); 1031 usblp->readcount = 0; /* XXX Why here? */ 1032 usblp->rcomplete = 0; 1033 spin_unlock_irqrestore(&usblp->lock, flags); 1034 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) { 1035 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc); 1036 spin_lock_irqsave(&usblp->lock, flags); 1037 usblp->rstatus = rc; 1038 usblp->rcomplete = 1; 1039 spin_unlock_irqrestore(&usblp->lock, flags); 1040 goto raise_submit; 1041 } 1042 1043 return 0; 1044 1045 raise_submit: 1046 usb_unanchor_urb(urb); 1047 usb_free_urb(urb); 1048 raise_urb: 1049 return rc; 1050 } 1051 1052 /* 1053 * Checks for printers that have quirks, such as requiring unidirectional 1054 * communication but reporting bidirectional; currently some HP printers 1055 * have this flaw (HP 810, 880, 895, etc.), or needing an init string 1056 * sent at each open (like some Epsons). 1057 * Returns 1 if found, 0 if not found. 1058 * 1059 * HP recommended that we use the bidirectional interface but 1060 * don't attempt any bulk IN transfers from the IN endpoint. 1061 * Here's some more detail on the problem: 1062 * The problem is not that it isn't bidirectional though. The problem 1063 * is that if you request a device ID, or status information, while 1064 * the buffers are full, the return data will end up in the print data 1065 * buffer. For example if you make sure you never request the device ID 1066 * while you are sending print data, and you don't try to query the 1067 * printer status every couple of milliseconds, you will probably be OK. 1068 */ 1069 static unsigned int usblp_quirks(__u16 vendor, __u16 product) 1070 { 1071 int i; 1072 1073 for (i = 0; quirk_printers[i].vendorId; i++) { 1074 if (vendor == quirk_printers[i].vendorId && 1075 product == quirk_printers[i].productId) 1076 return quirk_printers[i].quirks; 1077 } 1078 return 0; 1079 } 1080 1081 static const struct file_operations usblp_fops = { 1082 .owner = THIS_MODULE, 1083 .read = usblp_read, 1084 .write = usblp_write, 1085 .poll = usblp_poll, 1086 .unlocked_ioctl = usblp_ioctl, 1087 .compat_ioctl = usblp_ioctl, 1088 .open = usblp_open, 1089 .release = usblp_release, 1090 .llseek = noop_llseek, 1091 }; 1092 1093 static char *usblp_devnode(const struct device *dev, umode_t *mode) 1094 { 1095 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev)); 1096 } 1097 1098 static struct usb_class_driver usblp_class = { 1099 .name = "lp%d", 1100 .devnode = usblp_devnode, 1101 .fops = &usblp_fops, 1102 .minor_base = USBLP_MINOR_BASE, 1103 }; 1104 1105 static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf) 1106 { 1107 struct usb_interface *intf = to_usb_interface(dev); 1108 struct usblp *usblp = usb_get_intfdata(intf); 1109 1110 if (usblp->device_id_string[0] == 0 && 1111 usblp->device_id_string[1] == 0) 1112 return 0; 1113 1114 return sprintf(buf, "%s", usblp->device_id_string+2); 1115 } 1116 1117 static DEVICE_ATTR_RO(ieee1284_id); 1118 1119 static struct attribute *usblp_attrs[] = { 1120 &dev_attr_ieee1284_id.attr, 1121 NULL, 1122 }; 1123 ATTRIBUTE_GROUPS(usblp); 1124 1125 static int usblp_probe(struct usb_interface *intf, 1126 const struct usb_device_id *id) 1127 { 1128 struct usb_device *dev = interface_to_usbdev(intf); 1129 struct usblp *usblp; 1130 int protocol; 1131 int retval; 1132 1133 /* Malloc and start initializing usblp structure so we can use it 1134 * directly. */ 1135 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL); 1136 if (!usblp) { 1137 retval = -ENOMEM; 1138 goto abort_ret; 1139 } 1140 usblp->dev = dev; 1141 mutex_init(&usblp->wmut); 1142 mutex_init(&usblp->mut); 1143 spin_lock_init(&usblp->lock); 1144 init_waitqueue_head(&usblp->rwait); 1145 init_waitqueue_head(&usblp->wwait); 1146 init_usb_anchor(&usblp->urbs); 1147 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; 1148 usblp->intf = usb_get_intf(intf); 1149 1150 /* Malloc device ID string buffer to the largest expected length, 1151 * since we can re-query it on an ioctl and a dynamic string 1152 * could change in length. */ 1153 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) { 1154 retval = -ENOMEM; 1155 goto abort; 1156 } 1157 1158 /* 1159 * Allocate read buffer. We somewhat wastefully 1160 * malloc both regardless of bidirectionality, because the 1161 * alternate setting can be changed later via an ioctl. 1162 */ 1163 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) { 1164 retval = -ENOMEM; 1165 goto abort; 1166 } 1167 1168 /* Allocate buffer for printer status */ 1169 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL); 1170 if (!usblp->statusbuf) { 1171 retval = -ENOMEM; 1172 goto abort; 1173 } 1174 1175 /* Lookup quirks for this printer. */ 1176 usblp->quirks = usblp_quirks( 1177 le16_to_cpu(dev->descriptor.idVendor), 1178 le16_to_cpu(dev->descriptor.idProduct)); 1179 1180 /* Analyze and pick initial alternate settings and endpoints. */ 1181 protocol = usblp_select_alts(usblp); 1182 if (protocol < 0) { 1183 dev_dbg(&intf->dev, 1184 "incompatible printer-class device 0x%4.4X/0x%4.4X\n", 1185 le16_to_cpu(dev->descriptor.idVendor), 1186 le16_to_cpu(dev->descriptor.idProduct)); 1187 retval = -ENODEV; 1188 goto abort; 1189 } 1190 1191 /* Setup the selected alternate setting and endpoints. */ 1192 if (usblp_set_protocol(usblp, protocol) < 0) { 1193 retval = -ENODEV; /* ->probe isn't ->ioctl */ 1194 goto abort; 1195 } 1196 1197 /* Retrieve and store the device ID string. */ 1198 usblp_cache_device_id_string(usblp); 1199 1200 #ifdef DEBUG 1201 usblp_check_status(usblp, 0); 1202 #endif 1203 1204 usb_set_intfdata(intf, usblp); 1205 1206 usblp->present = 1; 1207 1208 retval = usb_register_dev(intf, &usblp_class); 1209 if (retval) { 1210 dev_err(&intf->dev, 1211 "usblp: Not able to get a minor (base %u, slice default): %d\n", 1212 USBLP_MINOR_BASE, retval); 1213 goto abort_intfdata; 1214 } 1215 usblp->minor = intf->minor; 1216 dev_info(&intf->dev, 1217 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n", 1218 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, 1219 usblp->ifnum, 1220 usblp->protocol[usblp->current_protocol].alt_setting, 1221 usblp->current_protocol, 1222 le16_to_cpu(usblp->dev->descriptor.idVendor), 1223 le16_to_cpu(usblp->dev->descriptor.idProduct)); 1224 1225 return 0; 1226 1227 abort_intfdata: 1228 usb_set_intfdata(intf, NULL); 1229 abort: 1230 kfree(usblp->readbuf); 1231 kfree(usblp->statusbuf); 1232 kfree(usblp->device_id_string); 1233 usb_put_intf(usblp->intf); 1234 kfree(usblp); 1235 abort_ret: 1236 return retval; 1237 } 1238 1239 /* 1240 * We are a "new" style driver with usb_device_id table, 1241 * but our requirements are too intricate for simple match to handle. 1242 * 1243 * The "proto_bias" option may be used to specify the preferred protocol 1244 * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 1245 * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol, 1246 * then we bind to it. 1247 * 1248 * The best interface for us is USB_CLASS_PRINTER/1/2, because it 1249 * is compatible with a stream of characters. If we find it, we bind to it. 1250 * 1251 * Note that the people from hpoj.sourceforge.net need to be able to 1252 * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls 1253 * for this purpose. 1254 * 1255 * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3, 1256 * even though it's probably not stream-compatible, because this matches 1257 * the behaviour of the old code. 1258 * 1259 * If nothing else, we bind to USB_CLASS_PRINTER/1/1 1260 * - the unidirectional interface. 1261 */ 1262 static int usblp_select_alts(struct usblp *usblp) 1263 { 1264 struct usb_interface *if_alt; 1265 struct usb_host_interface *ifd; 1266 struct usb_endpoint_descriptor *epwrite, *epread; 1267 int p, i; 1268 int res; 1269 1270 if_alt = usblp->intf; 1271 1272 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++) 1273 usblp->protocol[p].alt_setting = -1; 1274 1275 /* Find out what we have. */ 1276 for (i = 0; i < if_alt->num_altsetting; i++) { 1277 ifd = &if_alt->altsetting[i]; 1278 1279 if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER || 1280 ifd->desc.bInterfaceSubClass != 1) 1281 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS)) 1282 continue; 1283 1284 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL || 1285 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL) 1286 continue; 1287 1288 /* Look for the expected bulk endpoints. */ 1289 if (ifd->desc.bInterfaceProtocol > 1) { 1290 res = usb_find_common_endpoints(ifd, 1291 &epread, &epwrite, NULL, NULL); 1292 } else { 1293 epread = NULL; 1294 res = usb_find_bulk_out_endpoint(ifd, &epwrite); 1295 } 1296 1297 /* Ignore buggy hardware without the right endpoints. */ 1298 if (res) 1299 continue; 1300 1301 /* Turn off reads for buggy bidirectional printers. */ 1302 if (usblp->quirks & USBLP_QUIRK_BIDIR) { 1303 printk(KERN_INFO "usblp%d: Disabling reads from " 1304 "problematic bidirectional printer\n", 1305 usblp->minor); 1306 epread = NULL; 1307 } 1308 1309 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting = 1310 ifd->desc.bAlternateSetting; 1311 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite; 1312 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread; 1313 } 1314 1315 /* If our requested protocol is supported, then use it. */ 1316 if (proto_bias >= USBLP_FIRST_PROTOCOL && 1317 proto_bias <= USBLP_LAST_PROTOCOL && 1318 usblp->protocol[proto_bias].alt_setting != -1) 1319 return proto_bias; 1320 1321 /* Ordering is important here. */ 1322 if (usblp->protocol[2].alt_setting != -1) 1323 return 2; 1324 if (usblp->protocol[1].alt_setting != -1) 1325 return 1; 1326 if (usblp->protocol[3].alt_setting != -1) 1327 return 3; 1328 1329 /* If nothing is available, then don't bind to this device. */ 1330 return -1; 1331 } 1332 1333 static int usblp_set_protocol(struct usblp *usblp, int protocol) 1334 { 1335 int r, alts; 1336 1337 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL) 1338 return -EINVAL; 1339 1340 /* Don't unnecessarily set the interface if there's a single alt. */ 1341 if (usblp->intf->num_altsetting > 1) { 1342 alts = usblp->protocol[protocol].alt_setting; 1343 if (alts < 0) 1344 return -EINVAL; 1345 r = usb_set_interface(usblp->dev, usblp->ifnum, alts); 1346 if (r < 0) { 1347 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", 1348 alts, usblp->ifnum); 1349 return r; 1350 } 1351 } 1352 1353 usblp->bidir = (usblp->protocol[protocol].epread != NULL); 1354 usblp->current_protocol = protocol; 1355 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n", 1356 usblp->minor, protocol); 1357 return 0; 1358 } 1359 1360 /* Retrieves and caches device ID string. 1361 * Returns length, including length bytes but not null terminator. 1362 * On error, returns a negative errno value. */ 1363 static int usblp_cache_device_id_string(struct usblp *usblp) 1364 { 1365 int err, length; 1366 1367 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1); 1368 if (err < 0) { 1369 dev_dbg(&usblp->intf->dev, 1370 "usblp%d: error = %d reading IEEE-1284 Device ID string\n", 1371 usblp->minor, err); 1372 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0'; 1373 return -EIO; 1374 } 1375 1376 /* First two bytes are length in big-endian. 1377 * They count themselves, and we copy them into 1378 * the user's buffer. */ 1379 length = be16_to_cpu(*((__be16 *)usblp->device_id_string)); 1380 if (length < 2) 1381 length = 2; 1382 else if (length >= USBLP_DEVICE_ID_SIZE) 1383 length = USBLP_DEVICE_ID_SIZE - 1; 1384 usblp->device_id_string[length] = '\0'; 1385 1386 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n", 1387 usblp->minor, length, &usblp->device_id_string[2]); 1388 1389 return length; 1390 } 1391 1392 static void usblp_disconnect(struct usb_interface *intf) 1393 { 1394 struct usblp *usblp = usb_get_intfdata(intf); 1395 1396 usb_deregister_dev(intf, &usblp_class); 1397 1398 if (!usblp || !usblp->dev) { 1399 dev_err(&intf->dev, "bogus disconnect\n"); 1400 BUG(); 1401 } 1402 1403 mutex_lock(&usblp_mutex); 1404 mutex_lock(&usblp->mut); 1405 usblp->present = 0; 1406 wake_up(&usblp->wwait); 1407 wake_up(&usblp->rwait); 1408 usb_set_intfdata(intf, NULL); 1409 1410 usblp_unlink_urbs(usblp); 1411 mutex_unlock(&usblp->mut); 1412 usb_poison_anchored_urbs(&usblp->urbs); 1413 1414 if (!usblp->used) 1415 usblp_cleanup(usblp); 1416 1417 mutex_unlock(&usblp_mutex); 1418 } 1419 1420 static int usblp_suspend(struct usb_interface *intf, pm_message_t message) 1421 { 1422 struct usblp *usblp = usb_get_intfdata(intf); 1423 1424 usblp_unlink_urbs(usblp); 1425 #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ 1426 /* not strictly necessary, but just in case */ 1427 wake_up(&usblp->wwait); 1428 wake_up(&usblp->rwait); 1429 #endif 1430 1431 return 0; 1432 } 1433 1434 static int usblp_resume(struct usb_interface *intf) 1435 { 1436 struct usblp *usblp = usb_get_intfdata(intf); 1437 int r; 1438 1439 r = handle_bidir(usblp); 1440 1441 return r; 1442 } 1443 1444 static const struct usb_device_id usblp_ids[] = { 1445 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) }, 1446 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) }, 1447 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) }, 1448 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) }, 1449 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) }, 1450 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) }, 1451 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */ 1452 { } /* Terminating entry */ 1453 }; 1454 1455 MODULE_DEVICE_TABLE(usb, usblp_ids); 1456 1457 static struct usb_driver usblp_driver = { 1458 .name = "usblp", 1459 .probe = usblp_probe, 1460 .disconnect = usblp_disconnect, 1461 .suspend = usblp_suspend, 1462 .resume = usblp_resume, 1463 .id_table = usblp_ids, 1464 .dev_groups = usblp_groups, 1465 .supports_autosuspend = 1, 1466 }; 1467 1468 module_usb_driver(usblp_driver); 1469 1470 MODULE_AUTHOR(DRIVER_AUTHOR); 1471 MODULE_DESCRIPTION(DRIVER_DESC); 1472 module_param(proto_bias, int, S_IRUGO | S_IWUSR); 1473 MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); 1474 MODULE_LICENSE("GPL"); 1475