1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * usblp.c 4 * 5 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com> 6 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> 7 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net> 8 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> 9 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com> 10 # Copyright (c) 2001 David Paschal <paschal@rcsis.com> 11 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name> 12 * 13 * USB Printer Device Class driver for USB printers and printer cables 14 * 15 * Sponsored by SuSE 16 * 17 * ChangeLog: 18 * v0.1 - thorough cleaning, URBification, almost a rewrite 19 * v0.2 - some more cleanups 20 * v0.3 - cleaner again, waitqueue fixes 21 * v0.4 - fixes in unidirectional mode 22 * v0.5 - add DEVICE_ID string support 23 * v0.6 - never time out 24 * v0.7 - fixed bulk-IN read and poll (David Paschal) 25 * v0.8 - add devfs support 26 * v0.9 - fix unplug-while-open paths 27 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org) 28 * v0.11 - add proto_bias option (Pete Zaitcev) 29 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal) 30 * v0.13 - alloc space for statusbuf (<status> not on stack); 31 * use usb_alloc_coherent() for read buf & write buf; 32 * none - Maintained in Linux kernel after v0.13 33 */ 34 35 #include <linux/module.h> 36 #include <linux/kernel.h> 37 #include <linux/sched/signal.h> 38 #include <linux/signal.h> 39 #include <linux/poll.h> 40 #include <linux/slab.h> 41 #include <linux/lp.h> 42 #include <linux/mutex.h> 43 #undef DEBUG 44 #include <linux/usb.h> 45 #include <linux/usb/ch9.h> 46 #include <linux/ratelimit.h> 47 48 /* 49 * Version Information 50 */ 51 #define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal" 52 #define DRIVER_DESC "USB Printer Device Class driver" 53 54 #define USBLP_BUF_SIZE 8192 55 #define USBLP_BUF_SIZE_IN 1024 56 #define USBLP_DEVICE_ID_SIZE 1024 57 58 /* ioctls: */ 59 #define IOCNR_GET_DEVICE_ID 1 60 #define IOCNR_GET_PROTOCOLS 2 61 #define IOCNR_SET_PROTOCOL 3 62 #define IOCNR_HP_SET_CHANNEL 4 63 #define IOCNR_GET_BUS_ADDRESS 5 64 #define IOCNR_GET_VID_PID 6 65 #define IOCNR_SOFT_RESET 7 66 /* Get device_id string: */ 67 #define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len) 68 /* The following ioctls were added for http://hpoj.sourceforge.net: 69 * Get two-int array: 70 * [0]=current protocol 71 * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 72 * 3=USB_CLASS_PRINTER/1/3), 73 * [1]=supported protocol mask (mask&(1<<n)!=0 means 74 * USB_CLASS_PRINTER/1/n supported): 75 */ 76 #define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len) 77 /* 78 * Set protocol 79 * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 80 * 3=USB_CLASS_PRINTER/1/3): 81 */ 82 #define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0) 83 /* Set channel number (HP Vendor-specific command): */ 84 #define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0) 85 /* Get two-int array: [0]=bus number, [1]=device address: */ 86 #define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len) 87 /* Get two-int array: [0]=vendor ID, [1]=product ID: */ 88 #define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len) 89 /* Perform class specific soft reset */ 90 #define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0); 91 92 /* 93 * A DEVICE_ID string may include the printer's serial number. 94 * It should end with a semi-colon (';'). 95 * An example from an HP 970C DeskJet printer is (this is one long string, 96 * with the serial number changed): 97 MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ; 98 */ 99 100 /* 101 * USB Printer Requests 102 */ 103 104 #define USBLP_REQ_GET_ID 0x00 105 #define USBLP_REQ_GET_STATUS 0x01 106 #define USBLP_REQ_RESET 0x02 107 #define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */ 108 109 #define USBLP_MINORS 16 110 #define USBLP_MINOR_BASE 0 111 112 #define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */ 113 114 #define USBLP_FIRST_PROTOCOL 1 115 #define USBLP_LAST_PROTOCOL 3 116 #define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1) 117 118 /* 119 * some arbitrary status buffer size; 120 * need a status buffer that is allocated via kmalloc(), not on stack 121 */ 122 #define STATUS_BUF_SIZE 8 123 124 /* 125 * Locks down the locking order: 126 * ->wmut locks wstatus. 127 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection, 128 * [rw]status. We only touch status when we know the side idle. 129 * ->lock locks what interrupt accesses. 130 */ 131 struct usblp { 132 struct usb_device *dev; /* USB device */ 133 struct mutex wmut; 134 struct mutex mut; 135 spinlock_t lock; /* locks rcomplete, wcomplete */ 136 char *readbuf; /* read transfer_buffer */ 137 char *statusbuf; /* status transfer_buffer */ 138 struct usb_anchor urbs; 139 wait_queue_head_t rwait, wwait; 140 int readcount; /* Counter for reads */ 141 int ifnum; /* Interface number */ 142 struct usb_interface *intf; /* The interface */ 143 /* 144 * Alternate-setting numbers and endpoints for each protocol 145 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports: 146 */ 147 struct { 148 int alt_setting; 149 struct usb_endpoint_descriptor *epwrite; 150 struct usb_endpoint_descriptor *epread; 151 } protocol[USBLP_MAX_PROTOCOLS]; 152 int current_protocol; 153 int minor; /* minor number of device */ 154 int wcomplete, rcomplete; 155 int wstatus; /* bytes written or error */ 156 int rstatus; /* bytes ready or error */ 157 unsigned int quirks; /* quirks flags */ 158 unsigned int flags; /* mode flags */ 159 unsigned char used; /* True if open */ 160 unsigned char present; /* True if not disconnected */ 161 unsigned char bidir; /* interface is bidirectional */ 162 unsigned char no_paper; /* Paper Out happened */ 163 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */ 164 /* first 2 bytes are (big-endian) length */ 165 }; 166 167 #ifdef DEBUG 168 static void usblp_dump(struct usblp *usblp) 169 { 170 struct device *dev = &usblp->intf->dev; 171 int p; 172 173 dev_dbg(dev, "usblp=0x%p\n", usblp); 174 dev_dbg(dev, "dev=0x%p\n", usblp->dev); 175 dev_dbg(dev, "present=%d\n", usblp->present); 176 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf); 177 dev_dbg(dev, "readcount=%d\n", usblp->readcount); 178 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum); 179 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) { 180 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p, 181 usblp->protocol[p].alt_setting); 182 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p, 183 usblp->protocol[p].epwrite); 184 dev_dbg(dev, "protocol[%d].epread=%p\n", p, 185 usblp->protocol[p].epread); 186 } 187 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol); 188 dev_dbg(dev, "minor=%d\n", usblp->minor); 189 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus); 190 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus); 191 dev_dbg(dev, "quirks=%d\n", usblp->quirks); 192 dev_dbg(dev, "used=%d\n", usblp->used); 193 dev_dbg(dev, "bidir=%d\n", usblp->bidir); 194 dev_dbg(dev, "device_id_string=\"%s\"\n", 195 usblp->device_id_string ? 196 usblp->device_id_string + 2 : 197 (unsigned char *)"(null)"); 198 } 199 #endif 200 201 /* Quirks: various printer quirks are handled by this table & its flags. */ 202 203 struct quirk_printer_struct { 204 __u16 vendorId; 205 __u16 productId; 206 unsigned int quirks; 207 }; 208 209 #define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */ 210 #define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */ 211 #define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */ 212 213 static const struct quirk_printer_struct quirk_printers[] = { 214 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */ 215 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */ 216 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */ 217 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ 218 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ 219 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ 220 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ 221 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ 222 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ 223 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ 224 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ 225 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ 226 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ 227 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ 228 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ 229 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ 230 { 0, 0 } 231 }; 232 233 static int usblp_wwait(struct usblp *usblp, int nonblock); 234 static int usblp_wtest(struct usblp *usblp, int nonblock); 235 static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock); 236 static int usblp_rtest(struct usblp *usblp, int nonblock); 237 static int usblp_submit_read(struct usblp *usblp); 238 static int usblp_select_alts(struct usblp *usblp); 239 static int usblp_set_protocol(struct usblp *usblp, int protocol); 240 static int usblp_cache_device_id_string(struct usblp *usblp); 241 242 /* forward reference to make our lives easier */ 243 static struct usb_driver usblp_driver; 244 static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */ 245 246 /* 247 * Functions for usblp control messages. 248 */ 249 250 static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len) 251 { 252 int retval; 253 int index = usblp->ifnum; 254 255 /* High byte has the interface index. 256 Low byte has the alternate setting. 257 */ 258 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) 259 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; 260 261 retval = usb_control_msg(usblp->dev, 262 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), 263 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT); 264 dev_dbg(&usblp->intf->dev, 265 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n", 266 request, !!dir, recip, value, index, len, retval); 267 return retval < 0 ? retval : 0; 268 } 269 270 #define usblp_read_status(usblp, status)\ 271 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1) 272 #define usblp_get_id(usblp, config, id, maxlen)\ 273 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen) 274 #define usblp_reset(usblp)\ 275 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0) 276 277 #define usblp_hp_channel_change_request(usblp, channel, buffer) \ 278 usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1) 279 280 /* 281 * See the description for usblp_select_alts() below for the usage 282 * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in 283 * case of any trouble. 284 */ 285 static int proto_bias = -1; 286 287 /* 288 * URB callback. 289 */ 290 291 static void usblp_bulk_read(struct urb *urb) 292 { 293 struct usblp *usblp = urb->context; 294 int status = urb->status; 295 unsigned long flags; 296 297 if (usblp->present && usblp->used) { 298 if (status) 299 printk(KERN_WARNING "usblp%d: " 300 "nonzero read bulk status received: %d\n", 301 usblp->minor, status); 302 } 303 spin_lock_irqsave(&usblp->lock, flags); 304 if (status < 0) 305 usblp->rstatus = status; 306 else 307 usblp->rstatus = urb->actual_length; 308 usblp->rcomplete = 1; 309 wake_up(&usblp->rwait); 310 spin_unlock_irqrestore(&usblp->lock, flags); 311 312 usb_free_urb(urb); 313 } 314 315 static void usblp_bulk_write(struct urb *urb) 316 { 317 struct usblp *usblp = urb->context; 318 int status = urb->status; 319 unsigned long flags; 320 321 if (usblp->present && usblp->used) { 322 if (status) 323 printk(KERN_WARNING "usblp%d: " 324 "nonzero write bulk status received: %d\n", 325 usblp->minor, status); 326 } 327 spin_lock_irqsave(&usblp->lock, flags); 328 if (status < 0) 329 usblp->wstatus = status; 330 else 331 usblp->wstatus = urb->actual_length; 332 usblp->no_paper = 0; 333 usblp->wcomplete = 1; 334 wake_up(&usblp->wwait); 335 spin_unlock_irqrestore(&usblp->lock, flags); 336 337 usb_free_urb(urb); 338 } 339 340 /* 341 * Get and print printer errors. 342 */ 343 344 static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; 345 346 static int usblp_check_status(struct usblp *usblp, int err) 347 { 348 unsigned char status, newerr = 0; 349 int error; 350 351 mutex_lock(&usblp->mut); 352 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) { 353 mutex_unlock(&usblp->mut); 354 printk_ratelimited(KERN_ERR 355 "usblp%d: error %d reading printer status\n", 356 usblp->minor, error); 357 return 0; 358 } 359 status = *usblp->statusbuf; 360 mutex_unlock(&usblp->mut); 361 362 if (~status & LP_PERRORP) 363 newerr = 3; 364 if (status & LP_POUTPA) 365 newerr = 1; 366 if (~status & LP_PSELECD) 367 newerr = 2; 368 369 if (newerr != err) { 370 printk(KERN_INFO "usblp%d: %s\n", 371 usblp->minor, usblp_messages[newerr]); 372 } 373 374 return newerr; 375 } 376 377 static int handle_bidir(struct usblp *usblp) 378 { 379 if (usblp->bidir && usblp->used) { 380 if (usblp_submit_read(usblp) < 0) 381 return -EIO; 382 } 383 return 0; 384 } 385 386 /* 387 * File op functions. 388 */ 389 390 static int usblp_open(struct inode *inode, struct file *file) 391 { 392 int minor = iminor(inode); 393 struct usblp *usblp; 394 struct usb_interface *intf; 395 int retval; 396 397 if (minor < 0) 398 return -ENODEV; 399 400 mutex_lock(&usblp_mutex); 401 402 retval = -ENODEV; 403 intf = usb_find_interface(&usblp_driver, minor); 404 if (!intf) 405 goto out; 406 usblp = usb_get_intfdata(intf); 407 if (!usblp || !usblp->dev || !usblp->present) 408 goto out; 409 410 retval = -EBUSY; 411 if (usblp->used) 412 goto out; 413 414 /* 415 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons: 416 * - We do not want persistent state which close(2) does not clear 417 * - It is not used anyway, according to CUPS people 418 */ 419 420 retval = usb_autopm_get_interface(intf); 421 if (retval < 0) 422 goto out; 423 usblp->used = 1; 424 file->private_data = usblp; 425 426 usblp->wcomplete = 1; /* we begin writeable */ 427 usblp->wstatus = 0; 428 usblp->rcomplete = 0; 429 430 if (handle_bidir(usblp) < 0) { 431 usb_autopm_put_interface(intf); 432 usblp->used = 0; 433 file->private_data = NULL; 434 retval = -EIO; 435 } 436 out: 437 mutex_unlock(&usblp_mutex); 438 return retval; 439 } 440 441 static void usblp_cleanup(struct usblp *usblp) 442 { 443 printk(KERN_INFO "usblp%d: removed\n", usblp->minor); 444 445 kfree(usblp->readbuf); 446 kfree(usblp->device_id_string); 447 kfree(usblp->statusbuf); 448 usb_put_intf(usblp->intf); 449 kfree(usblp); 450 } 451 452 static void usblp_unlink_urbs(struct usblp *usblp) 453 { 454 usb_kill_anchored_urbs(&usblp->urbs); 455 } 456 457 static int usblp_release(struct inode *inode, struct file *file) 458 { 459 struct usblp *usblp = file->private_data; 460 461 usblp->flags &= ~LP_ABORT; 462 463 mutex_lock(&usblp_mutex); 464 usblp->used = 0; 465 if (usblp->present) 466 usblp_unlink_urbs(usblp); 467 468 usb_autopm_put_interface(usblp->intf); 469 470 if (!usblp->present) /* finish cleanup from disconnect */ 471 usblp_cleanup(usblp); /* any URBs must be dead */ 472 473 mutex_unlock(&usblp_mutex); 474 return 0; 475 } 476 477 /* No kernel lock - fine */ 478 static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait) 479 { 480 __poll_t ret; 481 unsigned long flags; 482 483 struct usblp *usblp = file->private_data; 484 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */ 485 poll_wait(file, &usblp->rwait, wait); 486 poll_wait(file, &usblp->wwait, wait); 487 spin_lock_irqsave(&usblp->lock, flags); 488 ret = ((usblp->bidir && usblp->rcomplete) ? EPOLLIN | EPOLLRDNORM : 0) | 489 ((usblp->no_paper || usblp->wcomplete) ? EPOLLOUT | EPOLLWRNORM : 0); 490 spin_unlock_irqrestore(&usblp->lock, flags); 491 return ret; 492 } 493 494 static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 495 { 496 struct usblp *usblp = file->private_data; 497 int length, err, i; 498 unsigned char newChannel; 499 int status; 500 int twoints[2]; 501 int retval = 0; 502 503 mutex_lock(&usblp->mut); 504 if (!usblp->present) { 505 retval = -ENODEV; 506 goto done; 507 } 508 509 dev_dbg(&usblp->intf->dev, 510 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd, 511 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); 512 513 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ 514 515 switch (_IOC_NR(cmd)) { 516 517 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ 518 if (_IOC_DIR(cmd) != _IOC_READ) { 519 retval = -EINVAL; 520 goto done; 521 } 522 523 length = usblp_cache_device_id_string(usblp); 524 if (length < 0) { 525 retval = length; 526 goto done; 527 } 528 if (length > _IOC_SIZE(cmd)) 529 length = _IOC_SIZE(cmd); /* truncate */ 530 531 if (copy_to_user((void __user *) arg, 532 usblp->device_id_string, 533 (unsigned long) length)) { 534 retval = -EFAULT; 535 goto done; 536 } 537 538 break; 539 540 case IOCNR_GET_PROTOCOLS: 541 if (_IOC_DIR(cmd) != _IOC_READ || 542 _IOC_SIZE(cmd) < sizeof(twoints)) { 543 retval = -EINVAL; 544 goto done; 545 } 546 547 twoints[0] = usblp->current_protocol; 548 twoints[1] = 0; 549 for (i = USBLP_FIRST_PROTOCOL; 550 i <= USBLP_LAST_PROTOCOL; i++) { 551 if (usblp->protocol[i].alt_setting >= 0) 552 twoints[1] |= (1<<i); 553 } 554 555 if (copy_to_user((void __user *)arg, 556 (unsigned char *)twoints, 557 sizeof(twoints))) { 558 retval = -EFAULT; 559 goto done; 560 } 561 562 break; 563 564 case IOCNR_SET_PROTOCOL: 565 if (_IOC_DIR(cmd) != _IOC_WRITE) { 566 retval = -EINVAL; 567 goto done; 568 } 569 570 #ifdef DEBUG 571 if (arg == -10) { 572 usblp_dump(usblp); 573 break; 574 } 575 #endif 576 577 usblp_unlink_urbs(usblp); 578 retval = usblp_set_protocol(usblp, arg); 579 if (retval < 0) { 580 usblp_set_protocol(usblp, 581 usblp->current_protocol); 582 } 583 break; 584 585 case IOCNR_HP_SET_CHANNEL: 586 if (_IOC_DIR(cmd) != _IOC_WRITE || 587 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || 588 usblp->quirks & USBLP_QUIRK_BIDIR) { 589 retval = -EINVAL; 590 goto done; 591 } 592 593 err = usblp_hp_channel_change_request(usblp, 594 arg, &newChannel); 595 if (err < 0) { 596 dev_err(&usblp->dev->dev, 597 "usblp%d: error = %d setting " 598 "HP channel\n", 599 usblp->minor, err); 600 retval = -EIO; 601 goto done; 602 } 603 604 dev_dbg(&usblp->intf->dev, 605 "usblp%d requested/got HP channel %ld/%d\n", 606 usblp->minor, arg, newChannel); 607 break; 608 609 case IOCNR_GET_BUS_ADDRESS: 610 if (_IOC_DIR(cmd) != _IOC_READ || 611 _IOC_SIZE(cmd) < sizeof(twoints)) { 612 retval = -EINVAL; 613 goto done; 614 } 615 616 twoints[0] = usblp->dev->bus->busnum; 617 twoints[1] = usblp->dev->devnum; 618 if (copy_to_user((void __user *)arg, 619 (unsigned char *)twoints, 620 sizeof(twoints))) { 621 retval = -EFAULT; 622 goto done; 623 } 624 625 dev_dbg(&usblp->intf->dev, 626 "usblp%d is bus=%d, device=%d\n", 627 usblp->minor, twoints[0], twoints[1]); 628 break; 629 630 case IOCNR_GET_VID_PID: 631 if (_IOC_DIR(cmd) != _IOC_READ || 632 _IOC_SIZE(cmd) < sizeof(twoints)) { 633 retval = -EINVAL; 634 goto done; 635 } 636 637 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); 638 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); 639 if (copy_to_user((void __user *)arg, 640 (unsigned char *)twoints, 641 sizeof(twoints))) { 642 retval = -EFAULT; 643 goto done; 644 } 645 646 dev_dbg(&usblp->intf->dev, 647 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n", 648 usblp->minor, twoints[0], twoints[1]); 649 break; 650 651 case IOCNR_SOFT_RESET: 652 if (_IOC_DIR(cmd) != _IOC_NONE) { 653 retval = -EINVAL; 654 goto done; 655 } 656 retval = usblp_reset(usblp); 657 break; 658 default: 659 retval = -ENOTTY; 660 } 661 else /* old-style ioctl value */ 662 switch (cmd) { 663 664 case LPGETSTATUS: 665 retval = usblp_read_status(usblp, usblp->statusbuf); 666 if (retval) { 667 printk_ratelimited(KERN_ERR "usblp%d:" 668 "failed reading printer status (%d)\n", 669 usblp->minor, retval); 670 retval = -EIO; 671 goto done; 672 } 673 status = *usblp->statusbuf; 674 if (copy_to_user((void __user *)arg, &status, sizeof(int))) 675 retval = -EFAULT; 676 break; 677 678 case LPABORT: 679 if (arg) 680 usblp->flags |= LP_ABORT; 681 else 682 usblp->flags &= ~LP_ABORT; 683 break; 684 685 default: 686 retval = -ENOTTY; 687 } 688 689 done: 690 mutex_unlock(&usblp->mut); 691 return retval; 692 } 693 694 static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length) 695 { 696 struct urb *urb; 697 char *writebuf; 698 699 writebuf = kmalloc(transfer_length, GFP_KERNEL); 700 if (writebuf == NULL) 701 return NULL; 702 urb = usb_alloc_urb(0, GFP_KERNEL); 703 if (urb == NULL) { 704 kfree(writebuf); 705 return NULL; 706 } 707 708 usb_fill_bulk_urb(urb, usblp->dev, 709 usb_sndbulkpipe(usblp->dev, 710 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress), 711 writebuf, transfer_length, usblp_bulk_write, usblp); 712 urb->transfer_flags |= URB_FREE_BUFFER; 713 714 return urb; 715 } 716 717 static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) 718 { 719 struct usblp *usblp = file->private_data; 720 struct urb *writeurb; 721 int rv; 722 int transfer_length; 723 ssize_t writecount = 0; 724 725 if (mutex_lock_interruptible(&usblp->wmut)) { 726 rv = -EINTR; 727 goto raise_biglock; 728 } 729 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0) 730 goto raise_wait; 731 732 while (writecount < count) { 733 /* 734 * Step 1: Submit next block. 735 */ 736 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE) 737 transfer_length = USBLP_BUF_SIZE; 738 739 rv = -ENOMEM; 740 writeurb = usblp_new_writeurb(usblp, transfer_length); 741 if (writeurb == NULL) 742 goto raise_urb; 743 usb_anchor_urb(writeurb, &usblp->urbs); 744 745 if (copy_from_user(writeurb->transfer_buffer, 746 buffer + writecount, transfer_length)) { 747 rv = -EFAULT; 748 goto raise_badaddr; 749 } 750 751 spin_lock_irq(&usblp->lock); 752 usblp->wcomplete = 0; 753 spin_unlock_irq(&usblp->lock); 754 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) { 755 usblp->wstatus = 0; 756 spin_lock_irq(&usblp->lock); 757 usblp->no_paper = 0; 758 usblp->wcomplete = 1; 759 wake_up(&usblp->wwait); 760 spin_unlock_irq(&usblp->lock); 761 if (rv != -ENOMEM) 762 rv = -EIO; 763 goto raise_submit; 764 } 765 766 /* 767 * Step 2: Wait for transfer to end, collect results. 768 */ 769 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK)); 770 if (rv < 0) { 771 if (rv == -EAGAIN) { 772 /* Presume that it's going to complete well. */ 773 writecount += transfer_length; 774 } 775 if (rv == -ENOSPC) { 776 spin_lock_irq(&usblp->lock); 777 usblp->no_paper = 1; /* Mark for poll(2) */ 778 spin_unlock_irq(&usblp->lock); 779 writecount += transfer_length; 780 } 781 /* Leave URB dangling, to be cleaned on close. */ 782 goto collect_error; 783 } 784 785 if (usblp->wstatus < 0) { 786 rv = -EIO; 787 goto collect_error; 788 } 789 /* 790 * This is critical: it must be our URB, not other writer's. 791 * The wmut exists mainly to cover us here. 792 */ 793 writecount += usblp->wstatus; 794 } 795 796 mutex_unlock(&usblp->wmut); 797 return writecount; 798 799 raise_submit: 800 raise_badaddr: 801 usb_unanchor_urb(writeurb); 802 usb_free_urb(writeurb); 803 raise_urb: 804 raise_wait: 805 collect_error: /* Out of raise sequence */ 806 mutex_unlock(&usblp->wmut); 807 raise_biglock: 808 return writecount ? writecount : rv; 809 } 810 811 /* 812 * Notice that we fail to restart in a few cases: on EFAULT, on restart 813 * error, etc. This is the historical behaviour. In all such cases we return 814 * EIO, and applications loop in order to get the new read going. 815 */ 816 static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos) 817 { 818 struct usblp *usblp = file->private_data; 819 ssize_t count; 820 ssize_t avail; 821 int rv; 822 823 if (!usblp->bidir) 824 return -EINVAL; 825 826 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK)); 827 if (rv < 0) 828 return rv; 829 830 if (!usblp->present) { 831 count = -ENODEV; 832 goto done; 833 } 834 835 if ((avail = usblp->rstatus) < 0) { 836 printk(KERN_ERR "usblp%d: error %d reading from printer\n", 837 usblp->minor, (int)avail); 838 usblp_submit_read(usblp); 839 count = -EIO; 840 goto done; 841 } 842 843 count = len < avail - usblp->readcount ? len : avail - usblp->readcount; 844 if (count != 0 && 845 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) { 846 count = -EFAULT; 847 goto done; 848 } 849 850 if ((usblp->readcount += count) == avail) { 851 if (usblp_submit_read(usblp) < 0) { 852 /* We don't want to leak USB return codes into errno. */ 853 if (count == 0) 854 count = -EIO; 855 goto done; 856 } 857 } 858 859 done: 860 mutex_unlock(&usblp->mut); 861 return count; 862 } 863 864 /* 865 * Wait for the write path to come idle. 866 * This is called under the ->wmut, so the idle path stays idle. 867 * 868 * Our write path has a peculiar property: it does not buffer like a tty, 869 * but waits for the write to succeed. This allows our ->release to bug out 870 * without waiting for writes to drain. But it obviously does not work 871 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use 872 * select(2) or poll(2) to wait for the buffer to drain before closing. 873 * Alternatively, set blocking mode with fcntl and issue a zero-size write. 874 */ 875 static int usblp_wwait(struct usblp *usblp, int nonblock) 876 { 877 DECLARE_WAITQUEUE(waita, current); 878 int rc; 879 int err = 0; 880 881 add_wait_queue(&usblp->wwait, &waita); 882 for (;;) { 883 if (mutex_lock_interruptible(&usblp->mut)) { 884 rc = -EINTR; 885 break; 886 } 887 set_current_state(TASK_INTERRUPTIBLE); 888 rc = usblp_wtest(usblp, nonblock); 889 mutex_unlock(&usblp->mut); 890 if (rc <= 0) 891 break; 892 893 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) { 894 if (usblp->flags & LP_ABORT) { 895 err = usblp_check_status(usblp, err); 896 if (err == 1) { /* Paper out */ 897 rc = -ENOSPC; 898 break; 899 } 900 } else { 901 /* Prod the printer, Gentoo#251237. */ 902 mutex_lock(&usblp->mut); 903 usblp_read_status(usblp, usblp->statusbuf); 904 mutex_unlock(&usblp->mut); 905 } 906 } 907 } 908 set_current_state(TASK_RUNNING); 909 remove_wait_queue(&usblp->wwait, &waita); 910 return rc; 911 } 912 913 static int usblp_wtest(struct usblp *usblp, int nonblock) 914 { 915 unsigned long flags; 916 917 if (!usblp->present) 918 return -ENODEV; 919 if (signal_pending(current)) 920 return -EINTR; 921 spin_lock_irqsave(&usblp->lock, flags); 922 if (usblp->wcomplete) { 923 spin_unlock_irqrestore(&usblp->lock, flags); 924 return 0; 925 } 926 spin_unlock_irqrestore(&usblp->lock, flags); 927 if (nonblock) 928 return -EAGAIN; 929 return 1; 930 } 931 932 /* 933 * Wait for read bytes to become available. This probably should have been 934 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional 935 * name for functions which lock and return. 936 * 937 * We do not use wait_event_interruptible because it makes locking iffy. 938 */ 939 static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock) 940 { 941 DECLARE_WAITQUEUE(waita, current); 942 int rc; 943 944 add_wait_queue(&usblp->rwait, &waita); 945 for (;;) { 946 if (mutex_lock_interruptible(&usblp->mut)) { 947 rc = -EINTR; 948 break; 949 } 950 set_current_state(TASK_INTERRUPTIBLE); 951 if ((rc = usblp_rtest(usblp, nonblock)) < 0) { 952 mutex_unlock(&usblp->mut); 953 break; 954 } 955 if (rc == 0) /* Keep it locked */ 956 break; 957 mutex_unlock(&usblp->mut); 958 schedule(); 959 } 960 set_current_state(TASK_RUNNING); 961 remove_wait_queue(&usblp->rwait, &waita); 962 return rc; 963 } 964 965 static int usblp_rtest(struct usblp *usblp, int nonblock) 966 { 967 unsigned long flags; 968 969 if (!usblp->present) 970 return -ENODEV; 971 if (signal_pending(current)) 972 return -EINTR; 973 spin_lock_irqsave(&usblp->lock, flags); 974 if (usblp->rcomplete) { 975 spin_unlock_irqrestore(&usblp->lock, flags); 976 return 0; 977 } 978 spin_unlock_irqrestore(&usblp->lock, flags); 979 if (nonblock) 980 return -EAGAIN; 981 return 1; 982 } 983 984 /* 985 * Please check ->bidir and other such things outside for now. 986 */ 987 static int usblp_submit_read(struct usblp *usblp) 988 { 989 struct urb *urb; 990 unsigned long flags; 991 int rc; 992 993 rc = -ENOMEM; 994 urb = usb_alloc_urb(0, GFP_KERNEL); 995 if (urb == NULL) 996 goto raise_urb; 997 998 usb_fill_bulk_urb(urb, usblp->dev, 999 usb_rcvbulkpipe(usblp->dev, 1000 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress), 1001 usblp->readbuf, USBLP_BUF_SIZE_IN, 1002 usblp_bulk_read, usblp); 1003 usb_anchor_urb(urb, &usblp->urbs); 1004 1005 spin_lock_irqsave(&usblp->lock, flags); 1006 usblp->readcount = 0; /* XXX Why here? */ 1007 usblp->rcomplete = 0; 1008 spin_unlock_irqrestore(&usblp->lock, flags); 1009 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) { 1010 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc); 1011 spin_lock_irqsave(&usblp->lock, flags); 1012 usblp->rstatus = rc; 1013 usblp->rcomplete = 1; 1014 spin_unlock_irqrestore(&usblp->lock, flags); 1015 goto raise_submit; 1016 } 1017 1018 return 0; 1019 1020 raise_submit: 1021 usb_unanchor_urb(urb); 1022 usb_free_urb(urb); 1023 raise_urb: 1024 return rc; 1025 } 1026 1027 /* 1028 * Checks for printers that have quirks, such as requiring unidirectional 1029 * communication but reporting bidirectional; currently some HP printers 1030 * have this flaw (HP 810, 880, 895, etc.), or needing an init string 1031 * sent at each open (like some Epsons). 1032 * Returns 1 if found, 0 if not found. 1033 * 1034 * HP recommended that we use the bidirectional interface but 1035 * don't attempt any bulk IN transfers from the IN endpoint. 1036 * Here's some more detail on the problem: 1037 * The problem is not that it isn't bidirectional though. The problem 1038 * is that if you request a device ID, or status information, while 1039 * the buffers are full, the return data will end up in the print data 1040 * buffer. For example if you make sure you never request the device ID 1041 * while you are sending print data, and you don't try to query the 1042 * printer status every couple of milliseconds, you will probably be OK. 1043 */ 1044 static unsigned int usblp_quirks(__u16 vendor, __u16 product) 1045 { 1046 int i; 1047 1048 for (i = 0; quirk_printers[i].vendorId; i++) { 1049 if (vendor == quirk_printers[i].vendorId && 1050 product == quirk_printers[i].productId) 1051 return quirk_printers[i].quirks; 1052 } 1053 return 0; 1054 } 1055 1056 static const struct file_operations usblp_fops = { 1057 .owner = THIS_MODULE, 1058 .read = usblp_read, 1059 .write = usblp_write, 1060 .poll = usblp_poll, 1061 .unlocked_ioctl = usblp_ioctl, 1062 .compat_ioctl = usblp_ioctl, 1063 .open = usblp_open, 1064 .release = usblp_release, 1065 .llseek = noop_llseek, 1066 }; 1067 1068 static char *usblp_devnode(struct device *dev, umode_t *mode) 1069 { 1070 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev)); 1071 } 1072 1073 static struct usb_class_driver usblp_class = { 1074 .name = "lp%d", 1075 .devnode = usblp_devnode, 1076 .fops = &usblp_fops, 1077 .minor_base = USBLP_MINOR_BASE, 1078 }; 1079 1080 static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf) 1081 { 1082 struct usb_interface *intf = to_usb_interface(dev); 1083 struct usblp *usblp = usb_get_intfdata(intf); 1084 1085 if (usblp->device_id_string[0] == 0 && 1086 usblp->device_id_string[1] == 0) 1087 return 0; 1088 1089 return sprintf(buf, "%s", usblp->device_id_string+2); 1090 } 1091 1092 static DEVICE_ATTR_RO(ieee1284_id); 1093 1094 static struct attribute *usblp_attrs[] = { 1095 &dev_attr_ieee1284_id.attr, 1096 NULL, 1097 }; 1098 ATTRIBUTE_GROUPS(usblp); 1099 1100 static int usblp_probe(struct usb_interface *intf, 1101 const struct usb_device_id *id) 1102 { 1103 struct usb_device *dev = interface_to_usbdev(intf); 1104 struct usblp *usblp; 1105 int protocol; 1106 int retval; 1107 1108 /* Malloc and start initializing usblp structure so we can use it 1109 * directly. */ 1110 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL); 1111 if (!usblp) { 1112 retval = -ENOMEM; 1113 goto abort_ret; 1114 } 1115 usblp->dev = dev; 1116 mutex_init(&usblp->wmut); 1117 mutex_init(&usblp->mut); 1118 spin_lock_init(&usblp->lock); 1119 init_waitqueue_head(&usblp->rwait); 1120 init_waitqueue_head(&usblp->wwait); 1121 init_usb_anchor(&usblp->urbs); 1122 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; 1123 usblp->intf = usb_get_intf(intf); 1124 1125 /* Malloc device ID string buffer to the largest expected length, 1126 * since we can re-query it on an ioctl and a dynamic string 1127 * could change in length. */ 1128 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) { 1129 retval = -ENOMEM; 1130 goto abort; 1131 } 1132 1133 /* 1134 * Allocate read buffer. We somewhat wastefully 1135 * malloc both regardless of bidirectionality, because the 1136 * alternate setting can be changed later via an ioctl. 1137 */ 1138 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) { 1139 retval = -ENOMEM; 1140 goto abort; 1141 } 1142 1143 /* Allocate buffer for printer status */ 1144 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL); 1145 if (!usblp->statusbuf) { 1146 retval = -ENOMEM; 1147 goto abort; 1148 } 1149 1150 /* Lookup quirks for this printer. */ 1151 usblp->quirks = usblp_quirks( 1152 le16_to_cpu(dev->descriptor.idVendor), 1153 le16_to_cpu(dev->descriptor.idProduct)); 1154 1155 /* Analyze and pick initial alternate settings and endpoints. */ 1156 protocol = usblp_select_alts(usblp); 1157 if (protocol < 0) { 1158 dev_dbg(&intf->dev, 1159 "incompatible printer-class device 0x%4.4X/0x%4.4X\n", 1160 le16_to_cpu(dev->descriptor.idVendor), 1161 le16_to_cpu(dev->descriptor.idProduct)); 1162 retval = -ENODEV; 1163 goto abort; 1164 } 1165 1166 /* Setup the selected alternate setting and endpoints. */ 1167 if (usblp_set_protocol(usblp, protocol) < 0) { 1168 retval = -ENODEV; /* ->probe isn't ->ioctl */ 1169 goto abort; 1170 } 1171 1172 /* Retrieve and store the device ID string. */ 1173 usblp_cache_device_id_string(usblp); 1174 1175 #ifdef DEBUG 1176 usblp_check_status(usblp, 0); 1177 #endif 1178 1179 usb_set_intfdata(intf, usblp); 1180 1181 usblp->present = 1; 1182 1183 retval = usb_register_dev(intf, &usblp_class); 1184 if (retval) { 1185 dev_err(&intf->dev, 1186 "usblp: Not able to get a minor (base %u, slice default): %d\n", 1187 USBLP_MINOR_BASE, retval); 1188 goto abort_intfdata; 1189 } 1190 usblp->minor = intf->minor; 1191 dev_info(&intf->dev, 1192 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n", 1193 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, 1194 usblp->ifnum, 1195 usblp->protocol[usblp->current_protocol].alt_setting, 1196 usblp->current_protocol, 1197 le16_to_cpu(usblp->dev->descriptor.idVendor), 1198 le16_to_cpu(usblp->dev->descriptor.idProduct)); 1199 1200 return 0; 1201 1202 abort_intfdata: 1203 usb_set_intfdata(intf, NULL); 1204 abort: 1205 kfree(usblp->readbuf); 1206 kfree(usblp->statusbuf); 1207 kfree(usblp->device_id_string); 1208 usb_put_intf(usblp->intf); 1209 kfree(usblp); 1210 abort_ret: 1211 return retval; 1212 } 1213 1214 /* 1215 * We are a "new" style driver with usb_device_id table, 1216 * but our requirements are too intricate for simple match to handle. 1217 * 1218 * The "proto_bias" option may be used to specify the preferred protocol 1219 * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 1220 * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol, 1221 * then we bind to it. 1222 * 1223 * The best interface for us is USB_CLASS_PRINTER/1/2, because it 1224 * is compatible with a stream of characters. If we find it, we bind to it. 1225 * 1226 * Note that the people from hpoj.sourceforge.net need to be able to 1227 * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls 1228 * for this purpose. 1229 * 1230 * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3, 1231 * even though it's probably not stream-compatible, because this matches 1232 * the behaviour of the old code. 1233 * 1234 * If nothing else, we bind to USB_CLASS_PRINTER/1/1 1235 * - the unidirectional interface. 1236 */ 1237 static int usblp_select_alts(struct usblp *usblp) 1238 { 1239 struct usb_interface *if_alt; 1240 struct usb_host_interface *ifd; 1241 struct usb_endpoint_descriptor *epwrite, *epread; 1242 int p, i; 1243 int res; 1244 1245 if_alt = usblp->intf; 1246 1247 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++) 1248 usblp->protocol[p].alt_setting = -1; 1249 1250 /* Find out what we have. */ 1251 for (i = 0; i < if_alt->num_altsetting; i++) { 1252 ifd = &if_alt->altsetting[i]; 1253 1254 if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER || 1255 ifd->desc.bInterfaceSubClass != 1) 1256 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS)) 1257 continue; 1258 1259 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL || 1260 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL) 1261 continue; 1262 1263 /* Look for the expected bulk endpoints. */ 1264 if (ifd->desc.bInterfaceProtocol > 1) { 1265 res = usb_find_common_endpoints(ifd, 1266 &epread, &epwrite, NULL, NULL); 1267 } else { 1268 epread = NULL; 1269 res = usb_find_bulk_out_endpoint(ifd, &epwrite); 1270 } 1271 1272 /* Ignore buggy hardware without the right endpoints. */ 1273 if (res) 1274 continue; 1275 1276 /* Turn off reads for buggy bidirectional printers. */ 1277 if (usblp->quirks & USBLP_QUIRK_BIDIR) { 1278 printk(KERN_INFO "usblp%d: Disabling reads from " 1279 "problematic bidirectional printer\n", 1280 usblp->minor); 1281 epread = NULL; 1282 } 1283 1284 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting = 1285 ifd->desc.bAlternateSetting; 1286 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite; 1287 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread; 1288 } 1289 1290 /* If our requested protocol is supported, then use it. */ 1291 if (proto_bias >= USBLP_FIRST_PROTOCOL && 1292 proto_bias <= USBLP_LAST_PROTOCOL && 1293 usblp->protocol[proto_bias].alt_setting != -1) 1294 return proto_bias; 1295 1296 /* Ordering is important here. */ 1297 if (usblp->protocol[2].alt_setting != -1) 1298 return 2; 1299 if (usblp->protocol[1].alt_setting != -1) 1300 return 1; 1301 if (usblp->protocol[3].alt_setting != -1) 1302 return 3; 1303 1304 /* If nothing is available, then don't bind to this device. */ 1305 return -1; 1306 } 1307 1308 static int usblp_set_protocol(struct usblp *usblp, int protocol) 1309 { 1310 int r, alts; 1311 1312 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL) 1313 return -EINVAL; 1314 1315 alts = usblp->protocol[protocol].alt_setting; 1316 if (alts < 0) 1317 return -EINVAL; 1318 r = usb_set_interface(usblp->dev, usblp->ifnum, alts); 1319 if (r < 0) { 1320 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", 1321 alts, usblp->ifnum); 1322 return r; 1323 } 1324 1325 usblp->bidir = (usblp->protocol[protocol].epread != NULL); 1326 usblp->current_protocol = protocol; 1327 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n", 1328 usblp->minor, protocol); 1329 return 0; 1330 } 1331 1332 /* Retrieves and caches device ID string. 1333 * Returns length, including length bytes but not null terminator. 1334 * On error, returns a negative errno value. */ 1335 static int usblp_cache_device_id_string(struct usblp *usblp) 1336 { 1337 int err, length; 1338 1339 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1); 1340 if (err < 0) { 1341 dev_dbg(&usblp->intf->dev, 1342 "usblp%d: error = %d reading IEEE-1284 Device ID string\n", 1343 usblp->minor, err); 1344 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0'; 1345 return -EIO; 1346 } 1347 1348 /* First two bytes are length in big-endian. 1349 * They count themselves, and we copy them into 1350 * the user's buffer. */ 1351 length = be16_to_cpu(*((__be16 *)usblp->device_id_string)); 1352 if (length < 2) 1353 length = 2; 1354 else if (length >= USBLP_DEVICE_ID_SIZE) 1355 length = USBLP_DEVICE_ID_SIZE - 1; 1356 usblp->device_id_string[length] = '\0'; 1357 1358 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n", 1359 usblp->minor, length, &usblp->device_id_string[2]); 1360 1361 return length; 1362 } 1363 1364 static void usblp_disconnect(struct usb_interface *intf) 1365 { 1366 struct usblp *usblp = usb_get_intfdata(intf); 1367 1368 usb_deregister_dev(intf, &usblp_class); 1369 1370 if (!usblp || !usblp->dev) { 1371 dev_err(&intf->dev, "bogus disconnect\n"); 1372 BUG(); 1373 } 1374 1375 mutex_lock(&usblp_mutex); 1376 mutex_lock(&usblp->mut); 1377 usblp->present = 0; 1378 wake_up(&usblp->wwait); 1379 wake_up(&usblp->rwait); 1380 usb_set_intfdata(intf, NULL); 1381 1382 usblp_unlink_urbs(usblp); 1383 mutex_unlock(&usblp->mut); 1384 usb_poison_anchored_urbs(&usblp->urbs); 1385 1386 if (!usblp->used) 1387 usblp_cleanup(usblp); 1388 1389 mutex_unlock(&usblp_mutex); 1390 } 1391 1392 static int usblp_suspend(struct usb_interface *intf, pm_message_t message) 1393 { 1394 struct usblp *usblp = usb_get_intfdata(intf); 1395 1396 usblp_unlink_urbs(usblp); 1397 #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ 1398 /* not strictly necessary, but just in case */ 1399 wake_up(&usblp->wwait); 1400 wake_up(&usblp->rwait); 1401 #endif 1402 1403 return 0; 1404 } 1405 1406 static int usblp_resume(struct usb_interface *intf) 1407 { 1408 struct usblp *usblp = usb_get_intfdata(intf); 1409 int r; 1410 1411 r = handle_bidir(usblp); 1412 1413 return r; 1414 } 1415 1416 static const struct usb_device_id usblp_ids[] = { 1417 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) }, 1418 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) }, 1419 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) }, 1420 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) }, 1421 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) }, 1422 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) }, 1423 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */ 1424 { } /* Terminating entry */ 1425 }; 1426 1427 MODULE_DEVICE_TABLE(usb, usblp_ids); 1428 1429 static struct usb_driver usblp_driver = { 1430 .name = "usblp", 1431 .probe = usblp_probe, 1432 .disconnect = usblp_disconnect, 1433 .suspend = usblp_suspend, 1434 .resume = usblp_resume, 1435 .id_table = usblp_ids, 1436 .dev_groups = usblp_groups, 1437 .supports_autosuspend = 1, 1438 }; 1439 1440 module_usb_driver(usblp_driver); 1441 1442 MODULE_AUTHOR(DRIVER_AUTHOR); 1443 MODULE_DESCRIPTION(DRIVER_DESC); 1444 module_param(proto_bias, int, S_IRUGO | S_IWUSR); 1445 MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); 1446 MODULE_LICENSE("GPL"); 1447