1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * usblp.c 4 * 5 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com> 6 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> 7 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net> 8 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> 9 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com> 10 # Copyright (c) 2001 David Paschal <paschal@rcsis.com> 11 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name> 12 * 13 * USB Printer Device Class driver for USB printers and printer cables 14 * 15 * Sponsored by SuSE 16 * 17 * ChangeLog: 18 * v0.1 - thorough cleaning, URBification, almost a rewrite 19 * v0.2 - some more cleanups 20 * v0.3 - cleaner again, waitqueue fixes 21 * v0.4 - fixes in unidirectional mode 22 * v0.5 - add DEVICE_ID string support 23 * v0.6 - never time out 24 * v0.7 - fixed bulk-IN read and poll (David Paschal) 25 * v0.8 - add devfs support 26 * v0.9 - fix unplug-while-open paths 27 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org) 28 * v0.11 - add proto_bias option (Pete Zaitcev) 29 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal) 30 * v0.13 - alloc space for statusbuf (<status> not on stack); 31 * use usb_alloc_coherent() for read buf & write buf; 32 * none - Maintained in Linux kernel after v0.13 33 */ 34 35 #include <linux/module.h> 36 #include <linux/kernel.h> 37 #include <linux/sched/signal.h> 38 #include <linux/signal.h> 39 #include <linux/poll.h> 40 #include <linux/slab.h> 41 #include <linux/lp.h> 42 #include <linux/mutex.h> 43 #undef DEBUG 44 #include <linux/usb.h> 45 #include <linux/usb/ch9.h> 46 #include <linux/ratelimit.h> 47 48 /* 49 * Version Information 50 */ 51 #define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal" 52 #define DRIVER_DESC "USB Printer Device Class driver" 53 54 #define USBLP_BUF_SIZE 8192 55 #define USBLP_BUF_SIZE_IN 1024 56 #define USBLP_DEVICE_ID_SIZE 1024 57 58 /* ioctls: */ 59 #define IOCNR_GET_DEVICE_ID 1 60 #define IOCNR_GET_PROTOCOLS 2 61 #define IOCNR_SET_PROTOCOL 3 62 #define IOCNR_HP_SET_CHANNEL 4 63 #define IOCNR_GET_BUS_ADDRESS 5 64 #define IOCNR_GET_VID_PID 6 65 #define IOCNR_SOFT_RESET 7 66 /* Get device_id string: */ 67 #define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len) 68 /* The following ioctls were added for http://hpoj.sourceforge.net: 69 * Get two-int array: 70 * [0]=current protocol 71 * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 72 * 3=USB_CLASS_PRINTER/1/3), 73 * [1]=supported protocol mask (mask&(1<<n)!=0 means 74 * USB_CLASS_PRINTER/1/n supported): 75 */ 76 #define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len) 77 /* 78 * Set protocol 79 * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 80 * 3=USB_CLASS_PRINTER/1/3): 81 */ 82 #define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0) 83 /* Set channel number (HP Vendor-specific command): */ 84 #define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0) 85 /* Get two-int array: [0]=bus number, [1]=device address: */ 86 #define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len) 87 /* Get two-int array: [0]=vendor ID, [1]=product ID: */ 88 #define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len) 89 /* Perform class specific soft reset */ 90 #define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0); 91 92 /* 93 * A DEVICE_ID string may include the printer's serial number. 94 * It should end with a semi-colon (';'). 95 * An example from an HP 970C DeskJet printer is (this is one long string, 96 * with the serial number changed): 97 MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ; 98 */ 99 100 /* 101 * USB Printer Requests 102 */ 103 104 #define USBLP_REQ_GET_ID 0x00 105 #define USBLP_REQ_GET_STATUS 0x01 106 #define USBLP_REQ_RESET 0x02 107 #define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */ 108 109 #define USBLP_MINORS 16 110 #define USBLP_MINOR_BASE 0 111 112 #define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */ 113 114 #define USBLP_FIRST_PROTOCOL 1 115 #define USBLP_LAST_PROTOCOL 3 116 #define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1) 117 118 /* 119 * some arbitrary status buffer size; 120 * need a status buffer that is allocated via kmalloc(), not on stack 121 */ 122 #define STATUS_BUF_SIZE 8 123 124 /* 125 * Locks down the locking order: 126 * ->wmut locks wstatus. 127 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection, 128 * [rw]status. We only touch status when we know the side idle. 129 * ->lock locks what interrupt accesses. 130 */ 131 struct usblp { 132 struct usb_device *dev; /* USB device */ 133 struct mutex wmut; 134 struct mutex mut; 135 spinlock_t lock; /* locks rcomplete, wcomplete */ 136 char *readbuf; /* read transfer_buffer */ 137 char *statusbuf; /* status transfer_buffer */ 138 struct usb_anchor urbs; 139 wait_queue_head_t rwait, wwait; 140 int readcount; /* Counter for reads */ 141 int ifnum; /* Interface number */ 142 struct usb_interface *intf; /* The interface */ 143 /* 144 * Alternate-setting numbers and endpoints for each protocol 145 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports: 146 */ 147 struct { 148 int alt_setting; 149 struct usb_endpoint_descriptor *epwrite; 150 struct usb_endpoint_descriptor *epread; 151 } protocol[USBLP_MAX_PROTOCOLS]; 152 int current_protocol; 153 int minor; /* minor number of device */ 154 int wcomplete, rcomplete; 155 int wstatus; /* bytes written or error */ 156 int rstatus; /* bytes ready or error */ 157 unsigned int quirks; /* quirks flags */ 158 unsigned int flags; /* mode flags */ 159 unsigned char used; /* True if open */ 160 unsigned char present; /* True if not disconnected */ 161 unsigned char bidir; /* interface is bidirectional */ 162 unsigned char no_paper; /* Paper Out happened */ 163 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */ 164 /* first 2 bytes are (big-endian) length */ 165 }; 166 167 #ifdef DEBUG 168 static void usblp_dump(struct usblp *usblp) 169 { 170 struct device *dev = &usblp->intf->dev; 171 int p; 172 173 dev_dbg(dev, "usblp=0x%p\n", usblp); 174 dev_dbg(dev, "dev=0x%p\n", usblp->dev); 175 dev_dbg(dev, "present=%d\n", usblp->present); 176 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf); 177 dev_dbg(dev, "readcount=%d\n", usblp->readcount); 178 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum); 179 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) { 180 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p, 181 usblp->protocol[p].alt_setting); 182 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p, 183 usblp->protocol[p].epwrite); 184 dev_dbg(dev, "protocol[%d].epread=%p\n", p, 185 usblp->protocol[p].epread); 186 } 187 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol); 188 dev_dbg(dev, "minor=%d\n", usblp->minor); 189 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus); 190 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus); 191 dev_dbg(dev, "quirks=%d\n", usblp->quirks); 192 dev_dbg(dev, "used=%d\n", usblp->used); 193 dev_dbg(dev, "bidir=%d\n", usblp->bidir); 194 dev_dbg(dev, "device_id_string=\"%s\"\n", 195 usblp->device_id_string ? 196 usblp->device_id_string + 2 : 197 (unsigned char *)"(null)"); 198 } 199 #endif 200 201 /* Quirks: various printer quirks are handled by this table & its flags. */ 202 203 struct quirk_printer_struct { 204 __u16 vendorId; 205 __u16 productId; 206 unsigned int quirks; 207 }; 208 209 #define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */ 210 #define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */ 211 #define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */ 212 213 static const struct quirk_printer_struct quirk_printers[] = { 214 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */ 215 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */ 216 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */ 217 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ 218 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ 219 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ 220 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ 221 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ 222 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ 223 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ 224 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ 225 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ 226 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ 227 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ 228 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ 229 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ 230 { 0, 0 } 231 }; 232 233 static int usblp_wwait(struct usblp *usblp, int nonblock); 234 static int usblp_wtest(struct usblp *usblp, int nonblock); 235 static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock); 236 static int usblp_rtest(struct usblp *usblp, int nonblock); 237 static int usblp_submit_read(struct usblp *usblp); 238 static int usblp_select_alts(struct usblp *usblp); 239 static int usblp_set_protocol(struct usblp *usblp, int protocol); 240 static int usblp_cache_device_id_string(struct usblp *usblp); 241 242 /* forward reference to make our lives easier */ 243 static struct usb_driver usblp_driver; 244 static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */ 245 246 /* 247 * Functions for usblp control messages. 248 */ 249 250 static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len) 251 { 252 int retval; 253 int index = usblp->ifnum; 254 255 /* High byte has the interface index. 256 Low byte has the alternate setting. 257 */ 258 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) 259 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; 260 261 retval = usb_control_msg(usblp->dev, 262 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), 263 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT); 264 dev_dbg(&usblp->intf->dev, 265 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n", 266 request, !!dir, recip, value, index, len, retval); 267 return retval < 0 ? retval : 0; 268 } 269 270 #define usblp_read_status(usblp, status)\ 271 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1) 272 #define usblp_get_id(usblp, config, id, maxlen)\ 273 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen) 274 #define usblp_reset(usblp)\ 275 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0) 276 277 #define usblp_hp_channel_change_request(usblp, channel, buffer) \ 278 usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1) 279 280 /* 281 * See the description for usblp_select_alts() below for the usage 282 * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in 283 * case of any trouble. 284 */ 285 static int proto_bias = -1; 286 287 /* 288 * URB callback. 289 */ 290 291 static void usblp_bulk_read(struct urb *urb) 292 { 293 struct usblp *usblp = urb->context; 294 int status = urb->status; 295 unsigned long flags; 296 297 if (usblp->present && usblp->used) { 298 if (status) 299 printk(KERN_WARNING "usblp%d: " 300 "nonzero read bulk status received: %d\n", 301 usblp->minor, status); 302 } 303 spin_lock_irqsave(&usblp->lock, flags); 304 if (status < 0) 305 usblp->rstatus = status; 306 else 307 usblp->rstatus = urb->actual_length; 308 usblp->rcomplete = 1; 309 wake_up(&usblp->rwait); 310 spin_unlock_irqrestore(&usblp->lock, flags); 311 312 usb_free_urb(urb); 313 } 314 315 static void usblp_bulk_write(struct urb *urb) 316 { 317 struct usblp *usblp = urb->context; 318 int status = urb->status; 319 unsigned long flags; 320 321 if (usblp->present && usblp->used) { 322 if (status) 323 printk(KERN_WARNING "usblp%d: " 324 "nonzero write bulk status received: %d\n", 325 usblp->minor, status); 326 } 327 spin_lock_irqsave(&usblp->lock, flags); 328 if (status < 0) 329 usblp->wstatus = status; 330 else 331 usblp->wstatus = urb->actual_length; 332 usblp->no_paper = 0; 333 usblp->wcomplete = 1; 334 wake_up(&usblp->wwait); 335 spin_unlock_irqrestore(&usblp->lock, flags); 336 337 usb_free_urb(urb); 338 } 339 340 /* 341 * Get and print printer errors. 342 */ 343 344 static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; 345 346 static int usblp_check_status(struct usblp *usblp, int err) 347 { 348 unsigned char status, newerr = 0; 349 int error; 350 351 mutex_lock(&usblp->mut); 352 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) { 353 mutex_unlock(&usblp->mut); 354 printk_ratelimited(KERN_ERR 355 "usblp%d: error %d reading printer status\n", 356 usblp->minor, error); 357 return 0; 358 } 359 status = *usblp->statusbuf; 360 mutex_unlock(&usblp->mut); 361 362 if (~status & LP_PERRORP) 363 newerr = 3; 364 if (status & LP_POUTPA) 365 newerr = 1; 366 if (~status & LP_PSELECD) 367 newerr = 2; 368 369 if (newerr != err) { 370 printk(KERN_INFO "usblp%d: %s\n", 371 usblp->minor, usblp_messages[newerr]); 372 } 373 374 return newerr; 375 } 376 377 static int handle_bidir(struct usblp *usblp) 378 { 379 if (usblp->bidir && usblp->used) { 380 if (usblp_submit_read(usblp) < 0) 381 return -EIO; 382 } 383 return 0; 384 } 385 386 /* 387 * File op functions. 388 */ 389 390 static int usblp_open(struct inode *inode, struct file *file) 391 { 392 int minor = iminor(inode); 393 struct usblp *usblp; 394 struct usb_interface *intf; 395 int retval; 396 397 if (minor < 0) 398 return -ENODEV; 399 400 mutex_lock(&usblp_mutex); 401 402 retval = -ENODEV; 403 intf = usb_find_interface(&usblp_driver, minor); 404 if (!intf) 405 goto out; 406 usblp = usb_get_intfdata(intf); 407 if (!usblp || !usblp->dev || !usblp->present) 408 goto out; 409 410 retval = -EBUSY; 411 if (usblp->used) 412 goto out; 413 414 /* 415 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons: 416 * - We do not want persistent state which close(2) does not clear 417 * - It is not used anyway, according to CUPS people 418 */ 419 420 retval = usb_autopm_get_interface(intf); 421 if (retval < 0) 422 goto out; 423 usblp->used = 1; 424 file->private_data = usblp; 425 426 usblp->wcomplete = 1; /* we begin writeable */ 427 usblp->wstatus = 0; 428 usblp->rcomplete = 0; 429 430 if (handle_bidir(usblp) < 0) { 431 usb_autopm_put_interface(intf); 432 usblp->used = 0; 433 file->private_data = NULL; 434 retval = -EIO; 435 } 436 out: 437 mutex_unlock(&usblp_mutex); 438 return retval; 439 } 440 441 static void usblp_cleanup(struct usblp *usblp) 442 { 443 printk(KERN_INFO "usblp%d: removed\n", usblp->minor); 444 445 kfree(usblp->readbuf); 446 kfree(usblp->device_id_string); 447 kfree(usblp->statusbuf); 448 usb_put_intf(usblp->intf); 449 kfree(usblp); 450 } 451 452 static void usblp_unlink_urbs(struct usblp *usblp) 453 { 454 usb_kill_anchored_urbs(&usblp->urbs); 455 } 456 457 static int usblp_release(struct inode *inode, struct file *file) 458 { 459 struct usblp *usblp = file->private_data; 460 461 usblp->flags &= ~LP_ABORT; 462 463 mutex_lock(&usblp_mutex); 464 usblp->used = 0; 465 if (usblp->present) 466 usblp_unlink_urbs(usblp); 467 468 usb_autopm_put_interface(usblp->intf); 469 470 if (!usblp->present) /* finish cleanup from disconnect */ 471 usblp_cleanup(usblp); 472 mutex_unlock(&usblp_mutex); 473 return 0; 474 } 475 476 /* No kernel lock - fine */ 477 static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait) 478 { 479 __poll_t ret; 480 unsigned long flags; 481 482 struct usblp *usblp = file->private_data; 483 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */ 484 poll_wait(file, &usblp->rwait, wait); 485 poll_wait(file, &usblp->wwait, wait); 486 spin_lock_irqsave(&usblp->lock, flags); 487 ret = ((usblp->bidir && usblp->rcomplete) ? EPOLLIN | EPOLLRDNORM : 0) | 488 ((usblp->no_paper || usblp->wcomplete) ? EPOLLOUT | EPOLLWRNORM : 0); 489 spin_unlock_irqrestore(&usblp->lock, flags); 490 return ret; 491 } 492 493 static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 494 { 495 struct usblp *usblp = file->private_data; 496 int length, err, i; 497 unsigned char newChannel; 498 int status; 499 int twoints[2]; 500 int retval = 0; 501 502 mutex_lock(&usblp->mut); 503 if (!usblp->present) { 504 retval = -ENODEV; 505 goto done; 506 } 507 508 dev_dbg(&usblp->intf->dev, 509 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd, 510 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); 511 512 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ 513 514 switch (_IOC_NR(cmd)) { 515 516 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ 517 if (_IOC_DIR(cmd) != _IOC_READ) { 518 retval = -EINVAL; 519 goto done; 520 } 521 522 length = usblp_cache_device_id_string(usblp); 523 if (length < 0) { 524 retval = length; 525 goto done; 526 } 527 if (length > _IOC_SIZE(cmd)) 528 length = _IOC_SIZE(cmd); /* truncate */ 529 530 if (copy_to_user((void __user *) arg, 531 usblp->device_id_string, 532 (unsigned long) length)) { 533 retval = -EFAULT; 534 goto done; 535 } 536 537 break; 538 539 case IOCNR_GET_PROTOCOLS: 540 if (_IOC_DIR(cmd) != _IOC_READ || 541 _IOC_SIZE(cmd) < sizeof(twoints)) { 542 retval = -EINVAL; 543 goto done; 544 } 545 546 twoints[0] = usblp->current_protocol; 547 twoints[1] = 0; 548 for (i = USBLP_FIRST_PROTOCOL; 549 i <= USBLP_LAST_PROTOCOL; i++) { 550 if (usblp->protocol[i].alt_setting >= 0) 551 twoints[1] |= (1<<i); 552 } 553 554 if (copy_to_user((void __user *)arg, 555 (unsigned char *)twoints, 556 sizeof(twoints))) { 557 retval = -EFAULT; 558 goto done; 559 } 560 561 break; 562 563 case IOCNR_SET_PROTOCOL: 564 if (_IOC_DIR(cmd) != _IOC_WRITE) { 565 retval = -EINVAL; 566 goto done; 567 } 568 569 #ifdef DEBUG 570 if (arg == -10) { 571 usblp_dump(usblp); 572 break; 573 } 574 #endif 575 576 usblp_unlink_urbs(usblp); 577 retval = usblp_set_protocol(usblp, arg); 578 if (retval < 0) { 579 usblp_set_protocol(usblp, 580 usblp->current_protocol); 581 } 582 break; 583 584 case IOCNR_HP_SET_CHANNEL: 585 if (_IOC_DIR(cmd) != _IOC_WRITE || 586 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || 587 usblp->quirks & USBLP_QUIRK_BIDIR) { 588 retval = -EINVAL; 589 goto done; 590 } 591 592 err = usblp_hp_channel_change_request(usblp, 593 arg, &newChannel); 594 if (err < 0) { 595 dev_err(&usblp->dev->dev, 596 "usblp%d: error = %d setting " 597 "HP channel\n", 598 usblp->minor, err); 599 retval = -EIO; 600 goto done; 601 } 602 603 dev_dbg(&usblp->intf->dev, 604 "usblp%d requested/got HP channel %ld/%d\n", 605 usblp->minor, arg, newChannel); 606 break; 607 608 case IOCNR_GET_BUS_ADDRESS: 609 if (_IOC_DIR(cmd) != _IOC_READ || 610 _IOC_SIZE(cmd) < sizeof(twoints)) { 611 retval = -EINVAL; 612 goto done; 613 } 614 615 twoints[0] = usblp->dev->bus->busnum; 616 twoints[1] = usblp->dev->devnum; 617 if (copy_to_user((void __user *)arg, 618 (unsigned char *)twoints, 619 sizeof(twoints))) { 620 retval = -EFAULT; 621 goto done; 622 } 623 624 dev_dbg(&usblp->intf->dev, 625 "usblp%d is bus=%d, device=%d\n", 626 usblp->minor, twoints[0], twoints[1]); 627 break; 628 629 case IOCNR_GET_VID_PID: 630 if (_IOC_DIR(cmd) != _IOC_READ || 631 _IOC_SIZE(cmd) < sizeof(twoints)) { 632 retval = -EINVAL; 633 goto done; 634 } 635 636 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); 637 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); 638 if (copy_to_user((void __user *)arg, 639 (unsigned char *)twoints, 640 sizeof(twoints))) { 641 retval = -EFAULT; 642 goto done; 643 } 644 645 dev_dbg(&usblp->intf->dev, 646 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n", 647 usblp->minor, twoints[0], twoints[1]); 648 break; 649 650 case IOCNR_SOFT_RESET: 651 if (_IOC_DIR(cmd) != _IOC_NONE) { 652 retval = -EINVAL; 653 goto done; 654 } 655 retval = usblp_reset(usblp); 656 break; 657 default: 658 retval = -ENOTTY; 659 } 660 else /* old-style ioctl value */ 661 switch (cmd) { 662 663 case LPGETSTATUS: 664 retval = usblp_read_status(usblp, usblp->statusbuf); 665 if (retval) { 666 printk_ratelimited(KERN_ERR "usblp%d:" 667 "failed reading printer status (%d)\n", 668 usblp->minor, retval); 669 retval = -EIO; 670 goto done; 671 } 672 status = *usblp->statusbuf; 673 if (copy_to_user((void __user *)arg, &status, sizeof(int))) 674 retval = -EFAULT; 675 break; 676 677 case LPABORT: 678 if (arg) 679 usblp->flags |= LP_ABORT; 680 else 681 usblp->flags &= ~LP_ABORT; 682 break; 683 684 default: 685 retval = -ENOTTY; 686 } 687 688 done: 689 mutex_unlock(&usblp->mut); 690 return retval; 691 } 692 693 static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length) 694 { 695 struct urb *urb; 696 char *writebuf; 697 698 writebuf = kmalloc(transfer_length, GFP_KERNEL); 699 if (writebuf == NULL) 700 return NULL; 701 urb = usb_alloc_urb(0, GFP_KERNEL); 702 if (urb == NULL) { 703 kfree(writebuf); 704 return NULL; 705 } 706 707 usb_fill_bulk_urb(urb, usblp->dev, 708 usb_sndbulkpipe(usblp->dev, 709 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress), 710 writebuf, transfer_length, usblp_bulk_write, usblp); 711 urb->transfer_flags |= URB_FREE_BUFFER; 712 713 return urb; 714 } 715 716 static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) 717 { 718 struct usblp *usblp = file->private_data; 719 struct urb *writeurb; 720 int rv; 721 int transfer_length; 722 ssize_t writecount = 0; 723 724 if (mutex_lock_interruptible(&usblp->wmut)) { 725 rv = -EINTR; 726 goto raise_biglock; 727 } 728 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0) 729 goto raise_wait; 730 731 while (writecount < count) { 732 /* 733 * Step 1: Submit next block. 734 */ 735 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE) 736 transfer_length = USBLP_BUF_SIZE; 737 738 rv = -ENOMEM; 739 writeurb = usblp_new_writeurb(usblp, transfer_length); 740 if (writeurb == NULL) 741 goto raise_urb; 742 usb_anchor_urb(writeurb, &usblp->urbs); 743 744 if (copy_from_user(writeurb->transfer_buffer, 745 buffer + writecount, transfer_length)) { 746 rv = -EFAULT; 747 goto raise_badaddr; 748 } 749 750 spin_lock_irq(&usblp->lock); 751 usblp->wcomplete = 0; 752 spin_unlock_irq(&usblp->lock); 753 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) { 754 usblp->wstatus = 0; 755 spin_lock_irq(&usblp->lock); 756 usblp->no_paper = 0; 757 usblp->wcomplete = 1; 758 wake_up(&usblp->wwait); 759 spin_unlock_irq(&usblp->lock); 760 if (rv != -ENOMEM) 761 rv = -EIO; 762 goto raise_submit; 763 } 764 765 /* 766 * Step 2: Wait for transfer to end, collect results. 767 */ 768 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK)); 769 if (rv < 0) { 770 if (rv == -EAGAIN) { 771 /* Presume that it's going to complete well. */ 772 writecount += transfer_length; 773 } 774 if (rv == -ENOSPC) { 775 spin_lock_irq(&usblp->lock); 776 usblp->no_paper = 1; /* Mark for poll(2) */ 777 spin_unlock_irq(&usblp->lock); 778 writecount += transfer_length; 779 } 780 /* Leave URB dangling, to be cleaned on close. */ 781 goto collect_error; 782 } 783 784 if (usblp->wstatus < 0) { 785 rv = -EIO; 786 goto collect_error; 787 } 788 /* 789 * This is critical: it must be our URB, not other writer's. 790 * The wmut exists mainly to cover us here. 791 */ 792 writecount += usblp->wstatus; 793 } 794 795 mutex_unlock(&usblp->wmut); 796 return writecount; 797 798 raise_submit: 799 raise_badaddr: 800 usb_unanchor_urb(writeurb); 801 usb_free_urb(writeurb); 802 raise_urb: 803 raise_wait: 804 collect_error: /* Out of raise sequence */ 805 mutex_unlock(&usblp->wmut); 806 raise_biglock: 807 return writecount ? writecount : rv; 808 } 809 810 /* 811 * Notice that we fail to restart in a few cases: on EFAULT, on restart 812 * error, etc. This is the historical behaviour. In all such cases we return 813 * EIO, and applications loop in order to get the new read going. 814 */ 815 static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos) 816 { 817 struct usblp *usblp = file->private_data; 818 ssize_t count; 819 ssize_t avail; 820 int rv; 821 822 if (!usblp->bidir) 823 return -EINVAL; 824 825 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK)); 826 if (rv < 0) 827 return rv; 828 829 if ((avail = usblp->rstatus) < 0) { 830 printk(KERN_ERR "usblp%d: error %d reading from printer\n", 831 usblp->minor, (int)avail); 832 usblp_submit_read(usblp); 833 count = -EIO; 834 goto done; 835 } 836 837 count = len < avail - usblp->readcount ? len : avail - usblp->readcount; 838 if (count != 0 && 839 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) { 840 count = -EFAULT; 841 goto done; 842 } 843 844 if ((usblp->readcount += count) == avail) { 845 if (usblp_submit_read(usblp) < 0) { 846 /* We don't want to leak USB return codes into errno. */ 847 if (count == 0) 848 count = -EIO; 849 goto done; 850 } 851 } 852 853 done: 854 mutex_unlock(&usblp->mut); 855 return count; 856 } 857 858 /* 859 * Wait for the write path to come idle. 860 * This is called under the ->wmut, so the idle path stays idle. 861 * 862 * Our write path has a peculiar property: it does not buffer like a tty, 863 * but waits for the write to succeed. This allows our ->release to bug out 864 * without waiting for writes to drain. But it obviously does not work 865 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use 866 * select(2) or poll(2) to wait for the buffer to drain before closing. 867 * Alternatively, set blocking mode with fcntl and issue a zero-size write. 868 */ 869 static int usblp_wwait(struct usblp *usblp, int nonblock) 870 { 871 DECLARE_WAITQUEUE(waita, current); 872 int rc; 873 int err = 0; 874 875 add_wait_queue(&usblp->wwait, &waita); 876 for (;;) { 877 if (mutex_lock_interruptible(&usblp->mut)) { 878 rc = -EINTR; 879 break; 880 } 881 set_current_state(TASK_INTERRUPTIBLE); 882 rc = usblp_wtest(usblp, nonblock); 883 mutex_unlock(&usblp->mut); 884 if (rc <= 0) 885 break; 886 887 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) { 888 if (usblp->flags & LP_ABORT) { 889 err = usblp_check_status(usblp, err); 890 if (err == 1) { /* Paper out */ 891 rc = -ENOSPC; 892 break; 893 } 894 } else { 895 /* Prod the printer, Gentoo#251237. */ 896 mutex_lock(&usblp->mut); 897 usblp_read_status(usblp, usblp->statusbuf); 898 mutex_unlock(&usblp->mut); 899 } 900 } 901 } 902 set_current_state(TASK_RUNNING); 903 remove_wait_queue(&usblp->wwait, &waita); 904 return rc; 905 } 906 907 static int usblp_wtest(struct usblp *usblp, int nonblock) 908 { 909 unsigned long flags; 910 911 if (!usblp->present) 912 return -ENODEV; 913 if (signal_pending(current)) 914 return -EINTR; 915 spin_lock_irqsave(&usblp->lock, flags); 916 if (usblp->wcomplete) { 917 spin_unlock_irqrestore(&usblp->lock, flags); 918 return 0; 919 } 920 spin_unlock_irqrestore(&usblp->lock, flags); 921 if (nonblock) 922 return -EAGAIN; 923 return 1; 924 } 925 926 /* 927 * Wait for read bytes to become available. This probably should have been 928 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional 929 * name for functions which lock and return. 930 * 931 * We do not use wait_event_interruptible because it makes locking iffy. 932 */ 933 static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock) 934 { 935 DECLARE_WAITQUEUE(waita, current); 936 int rc; 937 938 add_wait_queue(&usblp->rwait, &waita); 939 for (;;) { 940 if (mutex_lock_interruptible(&usblp->mut)) { 941 rc = -EINTR; 942 break; 943 } 944 set_current_state(TASK_INTERRUPTIBLE); 945 if ((rc = usblp_rtest(usblp, nonblock)) < 0) { 946 mutex_unlock(&usblp->mut); 947 break; 948 } 949 if (rc == 0) /* Keep it locked */ 950 break; 951 mutex_unlock(&usblp->mut); 952 schedule(); 953 } 954 set_current_state(TASK_RUNNING); 955 remove_wait_queue(&usblp->rwait, &waita); 956 return rc; 957 } 958 959 static int usblp_rtest(struct usblp *usblp, int nonblock) 960 { 961 unsigned long flags; 962 963 if (!usblp->present) 964 return -ENODEV; 965 if (signal_pending(current)) 966 return -EINTR; 967 spin_lock_irqsave(&usblp->lock, flags); 968 if (usblp->rcomplete) { 969 spin_unlock_irqrestore(&usblp->lock, flags); 970 return 0; 971 } 972 spin_unlock_irqrestore(&usblp->lock, flags); 973 if (nonblock) 974 return -EAGAIN; 975 return 1; 976 } 977 978 /* 979 * Please check ->bidir and other such things outside for now. 980 */ 981 static int usblp_submit_read(struct usblp *usblp) 982 { 983 struct urb *urb; 984 unsigned long flags; 985 int rc; 986 987 rc = -ENOMEM; 988 urb = usb_alloc_urb(0, GFP_KERNEL); 989 if (urb == NULL) 990 goto raise_urb; 991 992 usb_fill_bulk_urb(urb, usblp->dev, 993 usb_rcvbulkpipe(usblp->dev, 994 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress), 995 usblp->readbuf, USBLP_BUF_SIZE_IN, 996 usblp_bulk_read, usblp); 997 usb_anchor_urb(urb, &usblp->urbs); 998 999 spin_lock_irqsave(&usblp->lock, flags); 1000 usblp->readcount = 0; /* XXX Why here? */ 1001 usblp->rcomplete = 0; 1002 spin_unlock_irqrestore(&usblp->lock, flags); 1003 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) { 1004 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc); 1005 spin_lock_irqsave(&usblp->lock, flags); 1006 usblp->rstatus = rc; 1007 usblp->rcomplete = 1; 1008 spin_unlock_irqrestore(&usblp->lock, flags); 1009 goto raise_submit; 1010 } 1011 1012 return 0; 1013 1014 raise_submit: 1015 usb_unanchor_urb(urb); 1016 usb_free_urb(urb); 1017 raise_urb: 1018 return rc; 1019 } 1020 1021 /* 1022 * Checks for printers that have quirks, such as requiring unidirectional 1023 * communication but reporting bidirectional; currently some HP printers 1024 * have this flaw (HP 810, 880, 895, etc.), or needing an init string 1025 * sent at each open (like some Epsons). 1026 * Returns 1 if found, 0 if not found. 1027 * 1028 * HP recommended that we use the bidirectional interface but 1029 * don't attempt any bulk IN transfers from the IN endpoint. 1030 * Here's some more detail on the problem: 1031 * The problem is not that it isn't bidirectional though. The problem 1032 * is that if you request a device ID, or status information, while 1033 * the buffers are full, the return data will end up in the print data 1034 * buffer. For example if you make sure you never request the device ID 1035 * while you are sending print data, and you don't try to query the 1036 * printer status every couple of milliseconds, you will probably be OK. 1037 */ 1038 static unsigned int usblp_quirks(__u16 vendor, __u16 product) 1039 { 1040 int i; 1041 1042 for (i = 0; quirk_printers[i].vendorId; i++) { 1043 if (vendor == quirk_printers[i].vendorId && 1044 product == quirk_printers[i].productId) 1045 return quirk_printers[i].quirks; 1046 } 1047 return 0; 1048 } 1049 1050 static const struct file_operations usblp_fops = { 1051 .owner = THIS_MODULE, 1052 .read = usblp_read, 1053 .write = usblp_write, 1054 .poll = usblp_poll, 1055 .unlocked_ioctl = usblp_ioctl, 1056 .compat_ioctl = usblp_ioctl, 1057 .open = usblp_open, 1058 .release = usblp_release, 1059 .llseek = noop_llseek, 1060 }; 1061 1062 static char *usblp_devnode(struct device *dev, umode_t *mode) 1063 { 1064 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev)); 1065 } 1066 1067 static struct usb_class_driver usblp_class = { 1068 .name = "lp%d", 1069 .devnode = usblp_devnode, 1070 .fops = &usblp_fops, 1071 .minor_base = USBLP_MINOR_BASE, 1072 }; 1073 1074 static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf) 1075 { 1076 struct usb_interface *intf = to_usb_interface(dev); 1077 struct usblp *usblp = usb_get_intfdata(intf); 1078 1079 if (usblp->device_id_string[0] == 0 && 1080 usblp->device_id_string[1] == 0) 1081 return 0; 1082 1083 return sprintf(buf, "%s", usblp->device_id_string+2); 1084 } 1085 1086 static DEVICE_ATTR_RO(ieee1284_id); 1087 1088 static struct attribute *usblp_attrs[] = { 1089 &dev_attr_ieee1284_id.attr, 1090 NULL, 1091 }; 1092 ATTRIBUTE_GROUPS(usblp); 1093 1094 static int usblp_probe(struct usb_interface *intf, 1095 const struct usb_device_id *id) 1096 { 1097 struct usb_device *dev = interface_to_usbdev(intf); 1098 struct usblp *usblp; 1099 int protocol; 1100 int retval; 1101 1102 /* Malloc and start initializing usblp structure so we can use it 1103 * directly. */ 1104 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL); 1105 if (!usblp) { 1106 retval = -ENOMEM; 1107 goto abort_ret; 1108 } 1109 usblp->dev = dev; 1110 mutex_init(&usblp->wmut); 1111 mutex_init(&usblp->mut); 1112 spin_lock_init(&usblp->lock); 1113 init_waitqueue_head(&usblp->rwait); 1114 init_waitqueue_head(&usblp->wwait); 1115 init_usb_anchor(&usblp->urbs); 1116 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; 1117 usblp->intf = usb_get_intf(intf); 1118 1119 /* Malloc device ID string buffer to the largest expected length, 1120 * since we can re-query it on an ioctl and a dynamic string 1121 * could change in length. */ 1122 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) { 1123 retval = -ENOMEM; 1124 goto abort; 1125 } 1126 1127 /* 1128 * Allocate read buffer. We somewhat wastefully 1129 * malloc both regardless of bidirectionality, because the 1130 * alternate setting can be changed later via an ioctl. 1131 */ 1132 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) { 1133 retval = -ENOMEM; 1134 goto abort; 1135 } 1136 1137 /* Allocate buffer for printer status */ 1138 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL); 1139 if (!usblp->statusbuf) { 1140 retval = -ENOMEM; 1141 goto abort; 1142 } 1143 1144 /* Lookup quirks for this printer. */ 1145 usblp->quirks = usblp_quirks( 1146 le16_to_cpu(dev->descriptor.idVendor), 1147 le16_to_cpu(dev->descriptor.idProduct)); 1148 1149 /* Analyze and pick initial alternate settings and endpoints. */ 1150 protocol = usblp_select_alts(usblp); 1151 if (protocol < 0) { 1152 dev_dbg(&intf->dev, 1153 "incompatible printer-class device 0x%4.4X/0x%4.4X\n", 1154 le16_to_cpu(dev->descriptor.idVendor), 1155 le16_to_cpu(dev->descriptor.idProduct)); 1156 retval = -ENODEV; 1157 goto abort; 1158 } 1159 1160 /* Setup the selected alternate setting and endpoints. */ 1161 if (usblp_set_protocol(usblp, protocol) < 0) { 1162 retval = -ENODEV; /* ->probe isn't ->ioctl */ 1163 goto abort; 1164 } 1165 1166 /* Retrieve and store the device ID string. */ 1167 usblp_cache_device_id_string(usblp); 1168 1169 #ifdef DEBUG 1170 usblp_check_status(usblp, 0); 1171 #endif 1172 1173 usb_set_intfdata(intf, usblp); 1174 1175 usblp->present = 1; 1176 1177 retval = usb_register_dev(intf, &usblp_class); 1178 if (retval) { 1179 dev_err(&intf->dev, 1180 "usblp: Not able to get a minor (base %u, slice default): %d\n", 1181 USBLP_MINOR_BASE, retval); 1182 goto abort_intfdata; 1183 } 1184 usblp->minor = intf->minor; 1185 dev_info(&intf->dev, 1186 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n", 1187 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, 1188 usblp->ifnum, 1189 usblp->protocol[usblp->current_protocol].alt_setting, 1190 usblp->current_protocol, 1191 le16_to_cpu(usblp->dev->descriptor.idVendor), 1192 le16_to_cpu(usblp->dev->descriptor.idProduct)); 1193 1194 return 0; 1195 1196 abort_intfdata: 1197 usb_set_intfdata(intf, NULL); 1198 abort: 1199 kfree(usblp->readbuf); 1200 kfree(usblp->statusbuf); 1201 kfree(usblp->device_id_string); 1202 usb_put_intf(usblp->intf); 1203 kfree(usblp); 1204 abort_ret: 1205 return retval; 1206 } 1207 1208 /* 1209 * We are a "new" style driver with usb_device_id table, 1210 * but our requirements are too intricate for simple match to handle. 1211 * 1212 * The "proto_bias" option may be used to specify the preferred protocol 1213 * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, 1214 * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol, 1215 * then we bind to it. 1216 * 1217 * The best interface for us is USB_CLASS_PRINTER/1/2, because it 1218 * is compatible with a stream of characters. If we find it, we bind to it. 1219 * 1220 * Note that the people from hpoj.sourceforge.net need to be able to 1221 * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls 1222 * for this purpose. 1223 * 1224 * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3, 1225 * even though it's probably not stream-compatible, because this matches 1226 * the behaviour of the old code. 1227 * 1228 * If nothing else, we bind to USB_CLASS_PRINTER/1/1 1229 * - the unidirectional interface. 1230 */ 1231 static int usblp_select_alts(struct usblp *usblp) 1232 { 1233 struct usb_interface *if_alt; 1234 struct usb_host_interface *ifd; 1235 struct usb_endpoint_descriptor *epwrite, *epread; 1236 int p, i; 1237 int res; 1238 1239 if_alt = usblp->intf; 1240 1241 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++) 1242 usblp->protocol[p].alt_setting = -1; 1243 1244 /* Find out what we have. */ 1245 for (i = 0; i < if_alt->num_altsetting; i++) { 1246 ifd = &if_alt->altsetting[i]; 1247 1248 if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER || 1249 ifd->desc.bInterfaceSubClass != 1) 1250 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS)) 1251 continue; 1252 1253 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL || 1254 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL) 1255 continue; 1256 1257 /* Look for the expected bulk endpoints. */ 1258 if (ifd->desc.bInterfaceProtocol > 1) { 1259 res = usb_find_common_endpoints(ifd, 1260 &epread, &epwrite, NULL, NULL); 1261 } else { 1262 epread = NULL; 1263 res = usb_find_bulk_out_endpoint(ifd, &epwrite); 1264 } 1265 1266 /* Ignore buggy hardware without the right endpoints. */ 1267 if (res) 1268 continue; 1269 1270 /* Turn off reads for buggy bidirectional printers. */ 1271 if (usblp->quirks & USBLP_QUIRK_BIDIR) { 1272 printk(KERN_INFO "usblp%d: Disabling reads from " 1273 "problematic bidirectional printer\n", 1274 usblp->minor); 1275 epread = NULL; 1276 } 1277 1278 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting = 1279 ifd->desc.bAlternateSetting; 1280 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite; 1281 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread; 1282 } 1283 1284 /* If our requested protocol is supported, then use it. */ 1285 if (proto_bias >= USBLP_FIRST_PROTOCOL && 1286 proto_bias <= USBLP_LAST_PROTOCOL && 1287 usblp->protocol[proto_bias].alt_setting != -1) 1288 return proto_bias; 1289 1290 /* Ordering is important here. */ 1291 if (usblp->protocol[2].alt_setting != -1) 1292 return 2; 1293 if (usblp->protocol[1].alt_setting != -1) 1294 return 1; 1295 if (usblp->protocol[3].alt_setting != -1) 1296 return 3; 1297 1298 /* If nothing is available, then don't bind to this device. */ 1299 return -1; 1300 } 1301 1302 static int usblp_set_protocol(struct usblp *usblp, int protocol) 1303 { 1304 int r, alts; 1305 1306 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL) 1307 return -EINVAL; 1308 1309 alts = usblp->protocol[protocol].alt_setting; 1310 if (alts < 0) 1311 return -EINVAL; 1312 r = usb_set_interface(usblp->dev, usblp->ifnum, alts); 1313 if (r < 0) { 1314 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", 1315 alts, usblp->ifnum); 1316 return r; 1317 } 1318 1319 usblp->bidir = (usblp->protocol[protocol].epread != NULL); 1320 usblp->current_protocol = protocol; 1321 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n", 1322 usblp->minor, protocol); 1323 return 0; 1324 } 1325 1326 /* Retrieves and caches device ID string. 1327 * Returns length, including length bytes but not null terminator. 1328 * On error, returns a negative errno value. */ 1329 static int usblp_cache_device_id_string(struct usblp *usblp) 1330 { 1331 int err, length; 1332 1333 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1); 1334 if (err < 0) { 1335 dev_dbg(&usblp->intf->dev, 1336 "usblp%d: error = %d reading IEEE-1284 Device ID string\n", 1337 usblp->minor, err); 1338 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0'; 1339 return -EIO; 1340 } 1341 1342 /* First two bytes are length in big-endian. 1343 * They count themselves, and we copy them into 1344 * the user's buffer. */ 1345 length = be16_to_cpu(*((__be16 *)usblp->device_id_string)); 1346 if (length < 2) 1347 length = 2; 1348 else if (length >= USBLP_DEVICE_ID_SIZE) 1349 length = USBLP_DEVICE_ID_SIZE - 1; 1350 usblp->device_id_string[length] = '\0'; 1351 1352 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n", 1353 usblp->minor, length, &usblp->device_id_string[2]); 1354 1355 return length; 1356 } 1357 1358 static void usblp_disconnect(struct usb_interface *intf) 1359 { 1360 struct usblp *usblp = usb_get_intfdata(intf); 1361 1362 usb_deregister_dev(intf, &usblp_class); 1363 1364 if (!usblp || !usblp->dev) { 1365 dev_err(&intf->dev, "bogus disconnect\n"); 1366 BUG(); 1367 } 1368 1369 mutex_lock(&usblp_mutex); 1370 mutex_lock(&usblp->mut); 1371 usblp->present = 0; 1372 wake_up(&usblp->wwait); 1373 wake_up(&usblp->rwait); 1374 usb_set_intfdata(intf, NULL); 1375 1376 usblp_unlink_urbs(usblp); 1377 mutex_unlock(&usblp->mut); 1378 1379 if (!usblp->used) 1380 usblp_cleanup(usblp); 1381 mutex_unlock(&usblp_mutex); 1382 } 1383 1384 static int usblp_suspend(struct usb_interface *intf, pm_message_t message) 1385 { 1386 struct usblp *usblp = usb_get_intfdata(intf); 1387 1388 usblp_unlink_urbs(usblp); 1389 #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ 1390 /* not strictly necessary, but just in case */ 1391 wake_up(&usblp->wwait); 1392 wake_up(&usblp->rwait); 1393 #endif 1394 1395 return 0; 1396 } 1397 1398 static int usblp_resume(struct usb_interface *intf) 1399 { 1400 struct usblp *usblp = usb_get_intfdata(intf); 1401 int r; 1402 1403 r = handle_bidir(usblp); 1404 1405 return r; 1406 } 1407 1408 static const struct usb_device_id usblp_ids[] = { 1409 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) }, 1410 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) }, 1411 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) }, 1412 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) }, 1413 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) }, 1414 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) }, 1415 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */ 1416 { } /* Terminating entry */ 1417 }; 1418 1419 MODULE_DEVICE_TABLE(usb, usblp_ids); 1420 1421 static struct usb_driver usblp_driver = { 1422 .name = "usblp", 1423 .probe = usblp_probe, 1424 .disconnect = usblp_disconnect, 1425 .suspend = usblp_suspend, 1426 .resume = usblp_resume, 1427 .id_table = usblp_ids, 1428 .dev_groups = usblp_groups, 1429 .supports_autosuspend = 1, 1430 }; 1431 1432 module_usb_driver(usblp_driver); 1433 1434 MODULE_AUTHOR(DRIVER_AUTHOR); 1435 MODULE_DESCRIPTION(DRIVER_DESC); 1436 module_param(proto_bias, int, S_IRUGO | S_IWUSR); 1437 MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); 1438 MODULE_LICENSE("GPL"); 1439