xref: /openbmc/linux/drivers/usb/chipidea/udc.c (revision 93df8a1e)
1 /*
2  * udc.c - ChipIdea UDC driver
3  *
4  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
5  *
6  * Author: David Lopo
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/dmapool.h>
16 #include <linux/err.h>
17 #include <linux/irqreturn.h>
18 #include <linux/kernel.h>
19 #include <linux/slab.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/usb/ch9.h>
22 #include <linux/usb/gadget.h>
23 #include <linux/usb/otg-fsm.h>
24 #include <linux/usb/chipidea.h>
25 
26 #include "ci.h"
27 #include "udc.h"
28 #include "bits.h"
29 #include "debug.h"
30 #include "otg.h"
31 #include "otg_fsm.h"
32 
33 /* control endpoint description */
34 static const struct usb_endpoint_descriptor
35 ctrl_endpt_out_desc = {
36 	.bLength         = USB_DT_ENDPOINT_SIZE,
37 	.bDescriptorType = USB_DT_ENDPOINT,
38 
39 	.bEndpointAddress = USB_DIR_OUT,
40 	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
41 	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
42 };
43 
44 static const struct usb_endpoint_descriptor
45 ctrl_endpt_in_desc = {
46 	.bLength         = USB_DT_ENDPOINT_SIZE,
47 	.bDescriptorType = USB_DT_ENDPOINT,
48 
49 	.bEndpointAddress = USB_DIR_IN,
50 	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
51 	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
52 };
53 
54 /**
55  * hw_ep_bit: calculates the bit number
56  * @num: endpoint number
57  * @dir: endpoint direction
58  *
59  * This function returns bit number
60  */
61 static inline int hw_ep_bit(int num, int dir)
62 {
63 	return num + (dir ? 16 : 0);
64 }
65 
66 static inline int ep_to_bit(struct ci_hdrc *ci, int n)
67 {
68 	int fill = 16 - ci->hw_ep_max / 2;
69 
70 	if (n >= ci->hw_ep_max / 2)
71 		n += fill;
72 
73 	return n;
74 }
75 
76 /**
77  * hw_device_state: enables/disables interrupts (execute without interruption)
78  * @dma: 0 => disable, !0 => enable and set dma engine
79  *
80  * This function returns an error code
81  */
82 static int hw_device_state(struct ci_hdrc *ci, u32 dma)
83 {
84 	if (dma) {
85 		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
86 		/* interrupt, error, port change, reset, sleep/suspend */
87 		hw_write(ci, OP_USBINTR, ~0,
88 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
89 	} else {
90 		hw_write(ci, OP_USBINTR, ~0, 0);
91 	}
92 	return 0;
93 }
94 
95 /**
96  * hw_ep_flush: flush endpoint fifo (execute without interruption)
97  * @num: endpoint number
98  * @dir: endpoint direction
99  *
100  * This function returns an error code
101  */
102 static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
103 {
104 	int n = hw_ep_bit(num, dir);
105 
106 	do {
107 		/* flush any pending transfer */
108 		hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
109 		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
110 			cpu_relax();
111 	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
112 
113 	return 0;
114 }
115 
116 /**
117  * hw_ep_disable: disables endpoint (execute without interruption)
118  * @num: endpoint number
119  * @dir: endpoint direction
120  *
121  * This function returns an error code
122  */
123 static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
124 {
125 	hw_ep_flush(ci, num, dir);
126 	hw_write(ci, OP_ENDPTCTRL + num,
127 		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
128 	return 0;
129 }
130 
131 /**
132  * hw_ep_enable: enables endpoint (execute without interruption)
133  * @num:  endpoint number
134  * @dir:  endpoint direction
135  * @type: endpoint type
136  *
137  * This function returns an error code
138  */
139 static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
140 {
141 	u32 mask, data;
142 
143 	if (dir) {
144 		mask  = ENDPTCTRL_TXT;  /* type    */
145 		data  = type << __ffs(mask);
146 
147 		mask |= ENDPTCTRL_TXS;  /* unstall */
148 		mask |= ENDPTCTRL_TXR;  /* reset data toggle */
149 		data |= ENDPTCTRL_TXR;
150 		mask |= ENDPTCTRL_TXE;  /* enable  */
151 		data |= ENDPTCTRL_TXE;
152 	} else {
153 		mask  = ENDPTCTRL_RXT;  /* type    */
154 		data  = type << __ffs(mask);
155 
156 		mask |= ENDPTCTRL_RXS;  /* unstall */
157 		mask |= ENDPTCTRL_RXR;  /* reset data toggle */
158 		data |= ENDPTCTRL_RXR;
159 		mask |= ENDPTCTRL_RXE;  /* enable  */
160 		data |= ENDPTCTRL_RXE;
161 	}
162 	hw_write(ci, OP_ENDPTCTRL + num, mask, data);
163 	return 0;
164 }
165 
166 /**
167  * hw_ep_get_halt: return endpoint halt status
168  * @num: endpoint number
169  * @dir: endpoint direction
170  *
171  * This function returns 1 if endpoint halted
172  */
173 static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
174 {
175 	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
176 
177 	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
178 }
179 
180 /**
181  * hw_ep_prime: primes endpoint (execute without interruption)
182  * @num:     endpoint number
183  * @dir:     endpoint direction
184  * @is_ctrl: true if control endpoint
185  *
186  * This function returns an error code
187  */
188 static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
189 {
190 	int n = hw_ep_bit(num, dir);
191 
192 	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
193 		return -EAGAIN;
194 
195 	hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
196 
197 	while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
198 		cpu_relax();
199 	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
200 		return -EAGAIN;
201 
202 	/* status shoult be tested according with manual but it doesn't work */
203 	return 0;
204 }
205 
206 /**
207  * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
208  *                 without interruption)
209  * @num:   endpoint number
210  * @dir:   endpoint direction
211  * @value: true => stall, false => unstall
212  *
213  * This function returns an error code
214  */
215 static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
216 {
217 	if (value != 0 && value != 1)
218 		return -EINVAL;
219 
220 	do {
221 		enum ci_hw_regs reg = OP_ENDPTCTRL + num;
222 		u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
223 		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
224 
225 		/* data toggle - reserved for EP0 but it's in ESS */
226 		hw_write(ci, reg, mask_xs|mask_xr,
227 			  value ? mask_xs : mask_xr);
228 	} while (value != hw_ep_get_halt(ci, num, dir));
229 
230 	return 0;
231 }
232 
233 /**
234  * hw_is_port_high_speed: test if port is high speed
235  *
236  * This function returns true if high speed port
237  */
238 static int hw_port_is_high_speed(struct ci_hdrc *ci)
239 {
240 	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
241 		hw_read(ci, OP_PORTSC, PORTSC_HSP);
242 }
243 
244 /**
245  * hw_test_and_clear_complete: test & clear complete status (execute without
246  *                             interruption)
247  * @n: endpoint number
248  *
249  * This function returns complete status
250  */
251 static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
252 {
253 	n = ep_to_bit(ci, n);
254 	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
255 }
256 
257 /**
258  * hw_test_and_clear_intr_active: test & clear active interrupts (execute
259  *                                without interruption)
260  *
261  * This function returns active interrutps
262  */
263 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
264 {
265 	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
266 
267 	hw_write(ci, OP_USBSTS, ~0, reg);
268 	return reg;
269 }
270 
271 /**
272  * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
273  *                                interruption)
274  *
275  * This function returns guard value
276  */
277 static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
278 {
279 	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
280 }
281 
282 /**
283  * hw_test_and_set_setup_guard: test & set setup guard (execute without
284  *                              interruption)
285  *
286  * This function returns guard value
287  */
288 static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
289 {
290 	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
291 }
292 
293 /**
294  * hw_usb_set_address: configures USB address (execute without interruption)
295  * @value: new USB address
296  *
297  * This function explicitly sets the address, without the "USBADRA" (advance)
298  * feature, which is not supported by older versions of the controller.
299  */
300 static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
301 {
302 	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
303 		 value << __ffs(DEVICEADDR_USBADR));
304 }
305 
306 /**
307  * hw_usb_reset: restart device after a bus reset (execute without
308  *               interruption)
309  *
310  * This function returns an error code
311  */
312 static int hw_usb_reset(struct ci_hdrc *ci)
313 {
314 	hw_usb_set_address(ci, 0);
315 
316 	/* ESS flushes only at end?!? */
317 	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
318 
319 	/* clear setup token semaphores */
320 	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
321 
322 	/* clear complete status */
323 	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
324 
325 	/* wait until all bits cleared */
326 	while (hw_read(ci, OP_ENDPTPRIME, ~0))
327 		udelay(10);             /* not RTOS friendly */
328 
329 	/* reset all endpoints ? */
330 
331 	/* reset internal status and wait for further instructions
332 	   no need to verify the port reset status (ESS does it) */
333 
334 	return 0;
335 }
336 
337 /******************************************************************************
338  * UTIL block
339  *****************************************************************************/
340 
341 static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
342 			  unsigned length)
343 {
344 	int i;
345 	u32 temp;
346 	struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
347 						  GFP_ATOMIC);
348 
349 	if (node == NULL)
350 		return -ENOMEM;
351 
352 	node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
353 				   &node->dma);
354 	if (node->ptr == NULL) {
355 		kfree(node);
356 		return -ENOMEM;
357 	}
358 
359 	memset(node->ptr, 0, sizeof(struct ci_hw_td));
360 	node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
361 	node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
362 	node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
363 	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
364 		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
365 
366 		if (hwreq->req.length == 0
367 				|| hwreq->req.length % hwep->ep.maxpacket)
368 			mul++;
369 		node->ptr->token |= mul << __ffs(TD_MULTO);
370 	}
371 
372 	temp = (u32) (hwreq->req.dma + hwreq->req.actual);
373 	if (length) {
374 		node->ptr->page[0] = cpu_to_le32(temp);
375 		for (i = 1; i < TD_PAGE_COUNT; i++) {
376 			u32 page = temp + i * CI_HDRC_PAGE_SIZE;
377 			page &= ~TD_RESERVED_MASK;
378 			node->ptr->page[i] = cpu_to_le32(page);
379 		}
380 	}
381 
382 	hwreq->req.actual += length;
383 
384 	if (!list_empty(&hwreq->tds)) {
385 		/* get the last entry */
386 		lastnode = list_entry(hwreq->tds.prev,
387 				struct td_node, td);
388 		lastnode->ptr->next = cpu_to_le32(node->dma);
389 	}
390 
391 	INIT_LIST_HEAD(&node->td);
392 	list_add_tail(&node->td, &hwreq->tds);
393 
394 	return 0;
395 }
396 
397 /**
398  * _usb_addr: calculates endpoint address from direction & number
399  * @ep:  endpoint
400  */
401 static inline u8 _usb_addr(struct ci_hw_ep *ep)
402 {
403 	return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
404 }
405 
406 /**
407  * _hardware_queue: configures a request at hardware level
408  * @gadget: gadget
409  * @hwep:   endpoint
410  *
411  * This function returns an error code
412  */
413 static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
414 {
415 	struct ci_hdrc *ci = hwep->ci;
416 	int ret = 0;
417 	unsigned rest = hwreq->req.length;
418 	int pages = TD_PAGE_COUNT;
419 	struct td_node *firstnode, *lastnode;
420 
421 	/* don't queue twice */
422 	if (hwreq->req.status == -EALREADY)
423 		return -EALREADY;
424 
425 	hwreq->req.status = -EALREADY;
426 
427 	ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir);
428 	if (ret)
429 		return ret;
430 
431 	/*
432 	 * The first buffer could be not page aligned.
433 	 * In that case we have to span into one extra td.
434 	 */
435 	if (hwreq->req.dma % PAGE_SIZE)
436 		pages--;
437 
438 	if (rest == 0)
439 		add_td_to_list(hwep, hwreq, 0);
440 
441 	while (rest > 0) {
442 		unsigned count = min(hwreq->req.length - hwreq->req.actual,
443 					(unsigned)(pages * CI_HDRC_PAGE_SIZE));
444 		add_td_to_list(hwep, hwreq, count);
445 		rest -= count;
446 	}
447 
448 	if (hwreq->req.zero && hwreq->req.length
449 	    && (hwreq->req.length % hwep->ep.maxpacket == 0))
450 		add_td_to_list(hwep, hwreq, 0);
451 
452 	firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
453 
454 	lastnode = list_entry(hwreq->tds.prev,
455 		struct td_node, td);
456 
457 	lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
458 	if (!hwreq->req.no_interrupt)
459 		lastnode->ptr->token |= cpu_to_le32(TD_IOC);
460 	wmb();
461 
462 	hwreq->req.actual = 0;
463 	if (!list_empty(&hwep->qh.queue)) {
464 		struct ci_hw_req *hwreqprev;
465 		int n = hw_ep_bit(hwep->num, hwep->dir);
466 		int tmp_stat;
467 		struct td_node *prevlastnode;
468 		u32 next = firstnode->dma & TD_ADDR_MASK;
469 
470 		hwreqprev = list_entry(hwep->qh.queue.prev,
471 				struct ci_hw_req, queue);
472 		prevlastnode = list_entry(hwreqprev->tds.prev,
473 				struct td_node, td);
474 
475 		prevlastnode->ptr->next = cpu_to_le32(next);
476 		wmb();
477 		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
478 			goto done;
479 		do {
480 			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
481 			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
482 		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
483 		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
484 		if (tmp_stat)
485 			goto done;
486 	}
487 
488 	/*  QH configuration */
489 	hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
490 	hwep->qh.ptr->td.token &=
491 		cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
492 
493 	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
494 		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
495 
496 		if (hwreq->req.length == 0
497 				|| hwreq->req.length % hwep->ep.maxpacket)
498 			mul++;
499 		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
500 	}
501 
502 	wmb();   /* synchronize before ep prime */
503 
504 	ret = hw_ep_prime(ci, hwep->num, hwep->dir,
505 			   hwep->type == USB_ENDPOINT_XFER_CONTROL);
506 done:
507 	return ret;
508 }
509 
510 /*
511  * free_pending_td: remove a pending request for the endpoint
512  * @hwep: endpoint
513  */
514 static void free_pending_td(struct ci_hw_ep *hwep)
515 {
516 	struct td_node *pending = hwep->pending_td;
517 
518 	dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
519 	hwep->pending_td = NULL;
520 	kfree(pending);
521 }
522 
523 static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
524 					   struct td_node *node)
525 {
526 	hwep->qh.ptr->td.next = node->dma;
527 	hwep->qh.ptr->td.token &=
528 		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
529 
530 	/* Synchronize before ep prime */
531 	wmb();
532 
533 	return hw_ep_prime(ci, hwep->num, hwep->dir,
534 				hwep->type == USB_ENDPOINT_XFER_CONTROL);
535 }
536 
537 /**
538  * _hardware_dequeue: handles a request at hardware level
539  * @gadget: gadget
540  * @hwep:   endpoint
541  *
542  * This function returns an error code
543  */
544 static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
545 {
546 	u32 tmptoken;
547 	struct td_node *node, *tmpnode;
548 	unsigned remaining_length;
549 	unsigned actual = hwreq->req.length;
550 	struct ci_hdrc *ci = hwep->ci;
551 
552 	if (hwreq->req.status != -EALREADY)
553 		return -EINVAL;
554 
555 	hwreq->req.status = 0;
556 
557 	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
558 		tmptoken = le32_to_cpu(node->ptr->token);
559 		if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
560 			int n = hw_ep_bit(hwep->num, hwep->dir);
561 
562 			if (ci->rev == CI_REVISION_24)
563 				if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
564 					reprime_dtd(ci, hwep, node);
565 			hwreq->req.status = -EALREADY;
566 			return -EBUSY;
567 		}
568 
569 		remaining_length = (tmptoken & TD_TOTAL_BYTES);
570 		remaining_length >>= __ffs(TD_TOTAL_BYTES);
571 		actual -= remaining_length;
572 
573 		hwreq->req.status = tmptoken & TD_STATUS;
574 		if ((TD_STATUS_HALTED & hwreq->req.status)) {
575 			hwreq->req.status = -EPIPE;
576 			break;
577 		} else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
578 			hwreq->req.status = -EPROTO;
579 			break;
580 		} else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
581 			hwreq->req.status = -EILSEQ;
582 			break;
583 		}
584 
585 		if (remaining_length) {
586 			if (hwep->dir) {
587 				hwreq->req.status = -EPROTO;
588 				break;
589 			}
590 		}
591 		/*
592 		 * As the hardware could still address the freed td
593 		 * which will run the udc unusable, the cleanup of the
594 		 * td has to be delayed by one.
595 		 */
596 		if (hwep->pending_td)
597 			free_pending_td(hwep);
598 
599 		hwep->pending_td = node;
600 		list_del_init(&node->td);
601 	}
602 
603 	usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir);
604 
605 	hwreq->req.actual += actual;
606 
607 	if (hwreq->req.status)
608 		return hwreq->req.status;
609 
610 	return hwreq->req.actual;
611 }
612 
613 /**
614  * _ep_nuke: dequeues all endpoint requests
615  * @hwep: endpoint
616  *
617  * This function returns an error code
618  * Caller must hold lock
619  */
620 static int _ep_nuke(struct ci_hw_ep *hwep)
621 __releases(hwep->lock)
622 __acquires(hwep->lock)
623 {
624 	struct td_node *node, *tmpnode;
625 	if (hwep == NULL)
626 		return -EINVAL;
627 
628 	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
629 
630 	while (!list_empty(&hwep->qh.queue)) {
631 
632 		/* pop oldest request */
633 		struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
634 						     struct ci_hw_req, queue);
635 
636 		list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
637 			dma_pool_free(hwep->td_pool, node->ptr, node->dma);
638 			list_del_init(&node->td);
639 			node->ptr = NULL;
640 			kfree(node);
641 		}
642 
643 		list_del_init(&hwreq->queue);
644 		hwreq->req.status = -ESHUTDOWN;
645 
646 		if (hwreq->req.complete != NULL) {
647 			spin_unlock(hwep->lock);
648 			usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
649 			spin_lock(hwep->lock);
650 		}
651 	}
652 
653 	if (hwep->pending_td)
654 		free_pending_td(hwep);
655 
656 	return 0;
657 }
658 
659 /**
660  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
661  * @gadget: gadget
662  *
663  * This function returns an error code
664  */
665 static int _gadget_stop_activity(struct usb_gadget *gadget)
666 {
667 	struct usb_ep *ep;
668 	struct ci_hdrc    *ci = container_of(gadget, struct ci_hdrc, gadget);
669 	unsigned long flags;
670 
671 	spin_lock_irqsave(&ci->lock, flags);
672 	ci->gadget.speed = USB_SPEED_UNKNOWN;
673 	ci->remote_wakeup = 0;
674 	ci->suspended = 0;
675 	spin_unlock_irqrestore(&ci->lock, flags);
676 
677 	/* flush all endpoints */
678 	gadget_for_each_ep(ep, gadget) {
679 		usb_ep_fifo_flush(ep);
680 	}
681 	usb_ep_fifo_flush(&ci->ep0out->ep);
682 	usb_ep_fifo_flush(&ci->ep0in->ep);
683 
684 	/* make sure to disable all endpoints */
685 	gadget_for_each_ep(ep, gadget) {
686 		usb_ep_disable(ep);
687 	}
688 
689 	if (ci->status != NULL) {
690 		usb_ep_free_request(&ci->ep0in->ep, ci->status);
691 		ci->status = NULL;
692 	}
693 
694 	return 0;
695 }
696 
697 /******************************************************************************
698  * ISR block
699  *****************************************************************************/
700 /**
701  * isr_reset_handler: USB reset interrupt handler
702  * @ci: UDC device
703  *
704  * This function resets USB engine after a bus reset occurred
705  */
706 static void isr_reset_handler(struct ci_hdrc *ci)
707 __releases(ci->lock)
708 __acquires(ci->lock)
709 {
710 	int retval;
711 
712 	spin_unlock(&ci->lock);
713 	if (ci->gadget.speed != USB_SPEED_UNKNOWN)
714 		usb_gadget_udc_reset(&ci->gadget, ci->driver);
715 
716 	retval = _gadget_stop_activity(&ci->gadget);
717 	if (retval)
718 		goto done;
719 
720 	retval = hw_usb_reset(ci);
721 	if (retval)
722 		goto done;
723 
724 	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
725 	if (ci->status == NULL)
726 		retval = -ENOMEM;
727 
728 done:
729 	spin_lock(&ci->lock);
730 
731 	if (retval)
732 		dev_err(ci->dev, "error: %i\n", retval);
733 }
734 
735 /**
736  * isr_get_status_complete: get_status request complete function
737  * @ep:  endpoint
738  * @req: request handled
739  *
740  * Caller must release lock
741  */
742 static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
743 {
744 	if (ep == NULL || req == NULL)
745 		return;
746 
747 	kfree(req->buf);
748 	usb_ep_free_request(ep, req);
749 }
750 
751 /**
752  * _ep_queue: queues (submits) an I/O request to an endpoint
753  *
754  * Caller must hold lock
755  */
756 static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
757 		    gfp_t __maybe_unused gfp_flags)
758 {
759 	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
760 	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
761 	struct ci_hdrc *ci = hwep->ci;
762 	int retval = 0;
763 
764 	if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
765 		return -EINVAL;
766 
767 	if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
768 		if (req->length)
769 			hwep = (ci->ep0_dir == RX) ?
770 			       ci->ep0out : ci->ep0in;
771 		if (!list_empty(&hwep->qh.queue)) {
772 			_ep_nuke(hwep);
773 			retval = -EOVERFLOW;
774 			dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
775 				 _usb_addr(hwep));
776 		}
777 	}
778 
779 	if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
780 	    hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) {
781 		dev_err(hwep->ci->dev, "request length too big for isochronous\n");
782 		return -EMSGSIZE;
783 	}
784 
785 	/* first nuke then test link, e.g. previous status has not sent */
786 	if (!list_empty(&hwreq->queue)) {
787 		dev_err(hwep->ci->dev, "request already in queue\n");
788 		return -EBUSY;
789 	}
790 
791 	/* push request */
792 	hwreq->req.status = -EINPROGRESS;
793 	hwreq->req.actual = 0;
794 
795 	retval = _hardware_enqueue(hwep, hwreq);
796 
797 	if (retval == -EALREADY)
798 		retval = 0;
799 	if (!retval)
800 		list_add_tail(&hwreq->queue, &hwep->qh.queue);
801 
802 	return retval;
803 }
804 
805 /**
806  * isr_get_status_response: get_status request response
807  * @ci: ci struct
808  * @setup: setup request packet
809  *
810  * This function returns an error code
811  */
812 static int isr_get_status_response(struct ci_hdrc *ci,
813 				   struct usb_ctrlrequest *setup)
814 __releases(hwep->lock)
815 __acquires(hwep->lock)
816 {
817 	struct ci_hw_ep *hwep = ci->ep0in;
818 	struct usb_request *req = NULL;
819 	gfp_t gfp_flags = GFP_ATOMIC;
820 	int dir, num, retval;
821 
822 	if (hwep == NULL || setup == NULL)
823 		return -EINVAL;
824 
825 	spin_unlock(hwep->lock);
826 	req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
827 	spin_lock(hwep->lock);
828 	if (req == NULL)
829 		return -ENOMEM;
830 
831 	req->complete = isr_get_status_complete;
832 	req->length   = 2;
833 	req->buf      = kzalloc(req->length, gfp_flags);
834 	if (req->buf == NULL) {
835 		retval = -ENOMEM;
836 		goto err_free_req;
837 	}
838 
839 	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
840 		*(u16 *)req->buf = (ci->remote_wakeup << 1) |
841 			ci->gadget.is_selfpowered;
842 	} else if ((setup->bRequestType & USB_RECIP_MASK) \
843 		   == USB_RECIP_ENDPOINT) {
844 		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
845 			TX : RX;
846 		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
847 		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
848 	}
849 	/* else do nothing; reserved for future use */
850 
851 	retval = _ep_queue(&hwep->ep, req, gfp_flags);
852 	if (retval)
853 		goto err_free_buf;
854 
855 	return 0;
856 
857  err_free_buf:
858 	kfree(req->buf);
859  err_free_req:
860 	spin_unlock(hwep->lock);
861 	usb_ep_free_request(&hwep->ep, req);
862 	spin_lock(hwep->lock);
863 	return retval;
864 }
865 
866 /**
867  * isr_setup_status_complete: setup_status request complete function
868  * @ep:  endpoint
869  * @req: request handled
870  *
871  * Caller must release lock. Put the port in test mode if test mode
872  * feature is selected.
873  */
874 static void
875 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
876 {
877 	struct ci_hdrc *ci = req->context;
878 	unsigned long flags;
879 
880 	if (ci->setaddr) {
881 		hw_usb_set_address(ci, ci->address);
882 		ci->setaddr = false;
883 		if (ci->address)
884 			usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
885 	}
886 
887 	spin_lock_irqsave(&ci->lock, flags);
888 	if (ci->test_mode)
889 		hw_port_test_set(ci, ci->test_mode);
890 	spin_unlock_irqrestore(&ci->lock, flags);
891 }
892 
893 /**
894  * isr_setup_status_phase: queues the status phase of a setup transation
895  * @ci: ci struct
896  *
897  * This function returns an error code
898  */
899 static int isr_setup_status_phase(struct ci_hdrc *ci)
900 {
901 	int retval;
902 	struct ci_hw_ep *hwep;
903 
904 	hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
905 	ci->status->context = ci;
906 	ci->status->complete = isr_setup_status_complete;
907 
908 	retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
909 
910 	return retval;
911 }
912 
913 /**
914  * isr_tr_complete_low: transaction complete low level handler
915  * @hwep: endpoint
916  *
917  * This function returns an error code
918  * Caller must hold lock
919  */
920 static int isr_tr_complete_low(struct ci_hw_ep *hwep)
921 __releases(hwep->lock)
922 __acquires(hwep->lock)
923 {
924 	struct ci_hw_req *hwreq, *hwreqtemp;
925 	struct ci_hw_ep *hweptemp = hwep;
926 	int retval = 0;
927 
928 	list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
929 			queue) {
930 		retval = _hardware_dequeue(hwep, hwreq);
931 		if (retval < 0)
932 			break;
933 		list_del_init(&hwreq->queue);
934 		if (hwreq->req.complete != NULL) {
935 			spin_unlock(hwep->lock);
936 			if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
937 					hwreq->req.length)
938 				hweptemp = hwep->ci->ep0in;
939 			usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
940 			spin_lock(hwep->lock);
941 		}
942 	}
943 
944 	if (retval == -EBUSY)
945 		retval = 0;
946 
947 	return retval;
948 }
949 
950 static int otg_a_alt_hnp_support(struct ci_hdrc *ci)
951 {
952 	dev_warn(&ci->gadget.dev,
953 		"connect the device to an alternate port if you want HNP\n");
954 	return isr_setup_status_phase(ci);
955 }
956 
957 /**
958  * isr_setup_packet_handler: setup packet handler
959  * @ci: UDC descriptor
960  *
961  * This function handles setup packet
962  */
963 static void isr_setup_packet_handler(struct ci_hdrc *ci)
964 __releases(ci->lock)
965 __acquires(ci->lock)
966 {
967 	struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
968 	struct usb_ctrlrequest req;
969 	int type, num, dir, err = -EINVAL;
970 	u8 tmode = 0;
971 
972 	/*
973 	 * Flush data and handshake transactions of previous
974 	 * setup packet.
975 	 */
976 	_ep_nuke(ci->ep0out);
977 	_ep_nuke(ci->ep0in);
978 
979 	/* read_setup_packet */
980 	do {
981 		hw_test_and_set_setup_guard(ci);
982 		memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
983 	} while (!hw_test_and_clear_setup_guard(ci));
984 
985 	type = req.bRequestType;
986 
987 	ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
988 
989 	switch (req.bRequest) {
990 	case USB_REQ_CLEAR_FEATURE:
991 		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
992 				le16_to_cpu(req.wValue) ==
993 				USB_ENDPOINT_HALT) {
994 			if (req.wLength != 0)
995 				break;
996 			num  = le16_to_cpu(req.wIndex);
997 			dir = num & USB_ENDPOINT_DIR_MASK;
998 			num &= USB_ENDPOINT_NUMBER_MASK;
999 			if (dir) /* TX */
1000 				num += ci->hw_ep_max / 2;
1001 			if (!ci->ci_hw_ep[num].wedge) {
1002 				spin_unlock(&ci->lock);
1003 				err = usb_ep_clear_halt(
1004 					&ci->ci_hw_ep[num].ep);
1005 				spin_lock(&ci->lock);
1006 				if (err)
1007 					break;
1008 			}
1009 			err = isr_setup_status_phase(ci);
1010 		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
1011 				le16_to_cpu(req.wValue) ==
1012 				USB_DEVICE_REMOTE_WAKEUP) {
1013 			if (req.wLength != 0)
1014 				break;
1015 			ci->remote_wakeup = 0;
1016 			err = isr_setup_status_phase(ci);
1017 		} else {
1018 			goto delegate;
1019 		}
1020 		break;
1021 	case USB_REQ_GET_STATUS:
1022 		if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
1023 		    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
1024 		    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
1025 			goto delegate;
1026 		if (le16_to_cpu(req.wLength) != 2 ||
1027 		    le16_to_cpu(req.wValue)  != 0)
1028 			break;
1029 		err = isr_get_status_response(ci, &req);
1030 		break;
1031 	case USB_REQ_SET_ADDRESS:
1032 		if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
1033 			goto delegate;
1034 		if (le16_to_cpu(req.wLength) != 0 ||
1035 		    le16_to_cpu(req.wIndex)  != 0)
1036 			break;
1037 		ci->address = (u8)le16_to_cpu(req.wValue);
1038 		ci->setaddr = true;
1039 		err = isr_setup_status_phase(ci);
1040 		break;
1041 	case USB_REQ_SET_FEATURE:
1042 		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1043 				le16_to_cpu(req.wValue) ==
1044 				USB_ENDPOINT_HALT) {
1045 			if (req.wLength != 0)
1046 				break;
1047 			num  = le16_to_cpu(req.wIndex);
1048 			dir = num & USB_ENDPOINT_DIR_MASK;
1049 			num &= USB_ENDPOINT_NUMBER_MASK;
1050 			if (dir) /* TX */
1051 				num += ci->hw_ep_max / 2;
1052 
1053 			spin_unlock(&ci->lock);
1054 			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
1055 			spin_lock(&ci->lock);
1056 			if (!err)
1057 				isr_setup_status_phase(ci);
1058 		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
1059 			if (req.wLength != 0)
1060 				break;
1061 			switch (le16_to_cpu(req.wValue)) {
1062 			case USB_DEVICE_REMOTE_WAKEUP:
1063 				ci->remote_wakeup = 1;
1064 				err = isr_setup_status_phase(ci);
1065 				break;
1066 			case USB_DEVICE_TEST_MODE:
1067 				tmode = le16_to_cpu(req.wIndex) >> 8;
1068 				switch (tmode) {
1069 				case TEST_J:
1070 				case TEST_K:
1071 				case TEST_SE0_NAK:
1072 				case TEST_PACKET:
1073 				case TEST_FORCE_EN:
1074 					ci->test_mode = tmode;
1075 					err = isr_setup_status_phase(
1076 							ci);
1077 					break;
1078 				default:
1079 					break;
1080 				}
1081 				break;
1082 			case USB_DEVICE_B_HNP_ENABLE:
1083 				if (ci_otg_is_fsm_mode(ci)) {
1084 					ci->gadget.b_hnp_enable = 1;
1085 					err = isr_setup_status_phase(
1086 							ci);
1087 				}
1088 				break;
1089 			case USB_DEVICE_A_ALT_HNP_SUPPORT:
1090 				if (ci_otg_is_fsm_mode(ci))
1091 					err = otg_a_alt_hnp_support(ci);
1092 				break;
1093 			default:
1094 				goto delegate;
1095 			}
1096 		} else {
1097 			goto delegate;
1098 		}
1099 		break;
1100 	default:
1101 delegate:
1102 		if (req.wLength == 0)   /* no data phase */
1103 			ci->ep0_dir = TX;
1104 
1105 		spin_unlock(&ci->lock);
1106 		err = ci->driver->setup(&ci->gadget, &req);
1107 		spin_lock(&ci->lock);
1108 		break;
1109 	}
1110 
1111 	if (err < 0) {
1112 		spin_unlock(&ci->lock);
1113 		if (usb_ep_set_halt(&hwep->ep))
1114 			dev_err(ci->dev, "error: ep_set_halt\n");
1115 		spin_lock(&ci->lock);
1116 	}
1117 }
1118 
1119 /**
1120  * isr_tr_complete_handler: transaction complete interrupt handler
1121  * @ci: UDC descriptor
1122  *
1123  * This function handles traffic events
1124  */
1125 static void isr_tr_complete_handler(struct ci_hdrc *ci)
1126 __releases(ci->lock)
1127 __acquires(ci->lock)
1128 {
1129 	unsigned i;
1130 	int err;
1131 
1132 	for (i = 0; i < ci->hw_ep_max; i++) {
1133 		struct ci_hw_ep *hwep  = &ci->ci_hw_ep[i];
1134 
1135 		if (hwep->ep.desc == NULL)
1136 			continue;   /* not configured */
1137 
1138 		if (hw_test_and_clear_complete(ci, i)) {
1139 			err = isr_tr_complete_low(hwep);
1140 			if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1141 				if (err > 0)   /* needs status phase */
1142 					err = isr_setup_status_phase(ci);
1143 				if (err < 0) {
1144 					spin_unlock(&ci->lock);
1145 					if (usb_ep_set_halt(&hwep->ep))
1146 						dev_err(ci->dev,
1147 							"error: ep_set_halt\n");
1148 					spin_lock(&ci->lock);
1149 				}
1150 			}
1151 		}
1152 
1153 		/* Only handle setup packet below */
1154 		if (i == 0 &&
1155 			hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
1156 			isr_setup_packet_handler(ci);
1157 	}
1158 }
1159 
1160 /******************************************************************************
1161  * ENDPT block
1162  *****************************************************************************/
1163 /**
1164  * ep_enable: configure endpoint, making it usable
1165  *
1166  * Check usb_ep_enable() at "usb_gadget.h" for details
1167  */
1168 static int ep_enable(struct usb_ep *ep,
1169 		     const struct usb_endpoint_descriptor *desc)
1170 {
1171 	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1172 	int retval = 0;
1173 	unsigned long flags;
1174 	u32 cap = 0;
1175 
1176 	if (ep == NULL || desc == NULL)
1177 		return -EINVAL;
1178 
1179 	spin_lock_irqsave(hwep->lock, flags);
1180 
1181 	/* only internal SW should enable ctrl endpts */
1182 
1183 	if (!list_empty(&hwep->qh.queue)) {
1184 		dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
1185 		spin_unlock_irqrestore(hwep->lock, flags);
1186 		return -EBUSY;
1187 	}
1188 
1189 	hwep->ep.desc = desc;
1190 
1191 	hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
1192 	hwep->num  = usb_endpoint_num(desc);
1193 	hwep->type = usb_endpoint_type(desc);
1194 
1195 	hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff;
1196 	hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc));
1197 
1198 	if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1199 		cap |= QH_IOS;
1200 
1201 	cap |= QH_ZLT;
1202 	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
1203 	/*
1204 	 * For ISO-TX, we set mult at QH as the largest value, and use
1205 	 * MultO at TD as real mult value.
1206 	 */
1207 	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
1208 		cap |= 3 << __ffs(QH_MULT);
1209 
1210 	hwep->qh.ptr->cap = cpu_to_le32(cap);
1211 
1212 	hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */
1213 
1214 	if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1215 		dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
1216 		retval = -EINVAL;
1217 	}
1218 
1219 	/*
1220 	 * Enable endpoints in the HW other than ep0 as ep0
1221 	 * is always enabled
1222 	 */
1223 	if (hwep->num)
1224 		retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
1225 				       hwep->type);
1226 
1227 	spin_unlock_irqrestore(hwep->lock, flags);
1228 	return retval;
1229 }
1230 
1231 /**
1232  * ep_disable: endpoint is no longer usable
1233  *
1234  * Check usb_ep_disable() at "usb_gadget.h" for details
1235  */
1236 static int ep_disable(struct usb_ep *ep)
1237 {
1238 	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1239 	int direction, retval = 0;
1240 	unsigned long flags;
1241 
1242 	if (ep == NULL)
1243 		return -EINVAL;
1244 	else if (hwep->ep.desc == NULL)
1245 		return -EBUSY;
1246 
1247 	spin_lock_irqsave(hwep->lock, flags);
1248 
1249 	/* only internal SW should disable ctrl endpts */
1250 
1251 	direction = hwep->dir;
1252 	do {
1253 		retval |= _ep_nuke(hwep);
1254 		retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
1255 
1256 		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1257 			hwep->dir = (hwep->dir == TX) ? RX : TX;
1258 
1259 	} while (hwep->dir != direction);
1260 
1261 	hwep->ep.desc = NULL;
1262 
1263 	spin_unlock_irqrestore(hwep->lock, flags);
1264 	return retval;
1265 }
1266 
1267 /**
1268  * ep_alloc_request: allocate a request object to use with this endpoint
1269  *
1270  * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1271  */
1272 static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1273 {
1274 	struct ci_hw_req *hwreq = NULL;
1275 
1276 	if (ep == NULL)
1277 		return NULL;
1278 
1279 	hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
1280 	if (hwreq != NULL) {
1281 		INIT_LIST_HEAD(&hwreq->queue);
1282 		INIT_LIST_HEAD(&hwreq->tds);
1283 	}
1284 
1285 	return (hwreq == NULL) ? NULL : &hwreq->req;
1286 }
1287 
1288 /**
1289  * ep_free_request: frees a request object
1290  *
1291  * Check usb_ep_free_request() at "usb_gadget.h" for details
1292  */
1293 static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
1294 {
1295 	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
1296 	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1297 	struct td_node *node, *tmpnode;
1298 	unsigned long flags;
1299 
1300 	if (ep == NULL || req == NULL) {
1301 		return;
1302 	} else if (!list_empty(&hwreq->queue)) {
1303 		dev_err(hwep->ci->dev, "freeing queued request\n");
1304 		return;
1305 	}
1306 
1307 	spin_lock_irqsave(hwep->lock, flags);
1308 
1309 	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1310 		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1311 		list_del_init(&node->td);
1312 		node->ptr = NULL;
1313 		kfree(node);
1314 	}
1315 
1316 	kfree(hwreq);
1317 
1318 	spin_unlock_irqrestore(hwep->lock, flags);
1319 }
1320 
1321 /**
1322  * ep_queue: queues (submits) an I/O request to an endpoint
1323  *
1324  * Check usb_ep_queue()* at usb_gadget.h" for details
1325  */
1326 static int ep_queue(struct usb_ep *ep, struct usb_request *req,
1327 		    gfp_t __maybe_unused gfp_flags)
1328 {
1329 	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
1330 	int retval = 0;
1331 	unsigned long flags;
1332 
1333 	if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
1334 		return -EINVAL;
1335 
1336 	spin_lock_irqsave(hwep->lock, flags);
1337 	retval = _ep_queue(ep, req, gfp_flags);
1338 	spin_unlock_irqrestore(hwep->lock, flags);
1339 	return retval;
1340 }
1341 
1342 /**
1343  * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1344  *
1345  * Check usb_ep_dequeue() at "usb_gadget.h" for details
1346  */
1347 static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
1348 {
1349 	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
1350 	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1351 	unsigned long flags;
1352 	struct td_node *node, *tmpnode;
1353 
1354 	if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
1355 		hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
1356 		list_empty(&hwep->qh.queue))
1357 		return -EINVAL;
1358 
1359 	spin_lock_irqsave(hwep->lock, flags);
1360 
1361 	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1362 
1363 	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1364 		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1365 		list_del(&node->td);
1366 		kfree(node);
1367 	}
1368 
1369 	/* pop request */
1370 	list_del_init(&hwreq->queue);
1371 
1372 	usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
1373 
1374 	req->status = -ECONNRESET;
1375 
1376 	if (hwreq->req.complete != NULL) {
1377 		spin_unlock(hwep->lock);
1378 		usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
1379 		spin_lock(hwep->lock);
1380 	}
1381 
1382 	spin_unlock_irqrestore(hwep->lock, flags);
1383 	return 0;
1384 }
1385 
1386 /**
1387  * ep_set_halt: sets the endpoint halt feature
1388  *
1389  * Check usb_ep_set_halt() at "usb_gadget.h" for details
1390  */
1391 static int ep_set_halt(struct usb_ep *ep, int value)
1392 {
1393 	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1394 	int direction, retval = 0;
1395 	unsigned long flags;
1396 
1397 	if (ep == NULL || hwep->ep.desc == NULL)
1398 		return -EINVAL;
1399 
1400 	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
1401 		return -EOPNOTSUPP;
1402 
1403 	spin_lock_irqsave(hwep->lock, flags);
1404 
1405 #ifndef STALL_IN
1406 	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
1407 	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
1408 	    !list_empty(&hwep->qh.queue)) {
1409 		spin_unlock_irqrestore(hwep->lock, flags);
1410 		return -EAGAIN;
1411 	}
1412 #endif
1413 
1414 	direction = hwep->dir;
1415 	do {
1416 		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
1417 
1418 		if (!value)
1419 			hwep->wedge = 0;
1420 
1421 		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1422 			hwep->dir = (hwep->dir == TX) ? RX : TX;
1423 
1424 	} while (hwep->dir != direction);
1425 
1426 	spin_unlock_irqrestore(hwep->lock, flags);
1427 	return retval;
1428 }
1429 
1430 /**
1431  * ep_set_wedge: sets the halt feature and ignores clear requests
1432  *
1433  * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1434  */
1435 static int ep_set_wedge(struct usb_ep *ep)
1436 {
1437 	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1438 	unsigned long flags;
1439 
1440 	if (ep == NULL || hwep->ep.desc == NULL)
1441 		return -EINVAL;
1442 
1443 	spin_lock_irqsave(hwep->lock, flags);
1444 	hwep->wedge = 1;
1445 	spin_unlock_irqrestore(hwep->lock, flags);
1446 
1447 	return usb_ep_set_halt(ep);
1448 }
1449 
1450 /**
1451  * ep_fifo_flush: flushes contents of a fifo
1452  *
1453  * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1454  */
1455 static void ep_fifo_flush(struct usb_ep *ep)
1456 {
1457 	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1458 	unsigned long flags;
1459 
1460 	if (ep == NULL) {
1461 		dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
1462 		return;
1463 	}
1464 
1465 	spin_lock_irqsave(hwep->lock, flags);
1466 
1467 	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1468 
1469 	spin_unlock_irqrestore(hwep->lock, flags);
1470 }
1471 
1472 /**
1473  * Endpoint-specific part of the API to the USB controller hardware
1474  * Check "usb_gadget.h" for details
1475  */
1476 static const struct usb_ep_ops usb_ep_ops = {
1477 	.enable	       = ep_enable,
1478 	.disable       = ep_disable,
1479 	.alloc_request = ep_alloc_request,
1480 	.free_request  = ep_free_request,
1481 	.queue	       = ep_queue,
1482 	.dequeue       = ep_dequeue,
1483 	.set_halt      = ep_set_halt,
1484 	.set_wedge     = ep_set_wedge,
1485 	.fifo_flush    = ep_fifo_flush,
1486 };
1487 
1488 /******************************************************************************
1489  * GADGET block
1490  *****************************************************************************/
1491 static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1492 {
1493 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1494 	unsigned long flags;
1495 	int gadget_ready = 0;
1496 
1497 	spin_lock_irqsave(&ci->lock, flags);
1498 	ci->vbus_active = is_active;
1499 	if (ci->driver)
1500 		gadget_ready = 1;
1501 	spin_unlock_irqrestore(&ci->lock, flags);
1502 
1503 	if (gadget_ready) {
1504 		if (is_active) {
1505 			pm_runtime_get_sync(&_gadget->dev);
1506 			hw_device_reset(ci);
1507 			hw_device_state(ci, ci->ep0out->qh.dma);
1508 			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
1509 			usb_udc_vbus_handler(_gadget, true);
1510 		} else {
1511 			usb_udc_vbus_handler(_gadget, false);
1512 			if (ci->driver)
1513 				ci->driver->disconnect(&ci->gadget);
1514 			hw_device_state(ci, 0);
1515 			if (ci->platdata->notify_event)
1516 				ci->platdata->notify_event(ci,
1517 				CI_HDRC_CONTROLLER_STOPPED_EVENT);
1518 			_gadget_stop_activity(&ci->gadget);
1519 			pm_runtime_put_sync(&_gadget->dev);
1520 			usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
1521 		}
1522 	}
1523 
1524 	return 0;
1525 }
1526 
1527 static int ci_udc_wakeup(struct usb_gadget *_gadget)
1528 {
1529 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1530 	unsigned long flags;
1531 	int ret = 0;
1532 
1533 	spin_lock_irqsave(&ci->lock, flags);
1534 	if (!ci->remote_wakeup) {
1535 		ret = -EOPNOTSUPP;
1536 		goto out;
1537 	}
1538 	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
1539 		ret = -EINVAL;
1540 		goto out;
1541 	}
1542 	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
1543 out:
1544 	spin_unlock_irqrestore(&ci->lock, flags);
1545 	return ret;
1546 }
1547 
1548 static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
1549 {
1550 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1551 
1552 	if (ci->usb_phy)
1553 		return usb_phy_set_power(ci->usb_phy, ma);
1554 	return -ENOTSUPP;
1555 }
1556 
1557 static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
1558 {
1559 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1560 	struct ci_hw_ep *hwep = ci->ep0in;
1561 	unsigned long flags;
1562 
1563 	spin_lock_irqsave(hwep->lock, flags);
1564 	_gadget->is_selfpowered = (is_on != 0);
1565 	spin_unlock_irqrestore(hwep->lock, flags);
1566 
1567 	return 0;
1568 }
1569 
1570 /* Change Data+ pullup status
1571  * this func is used by usb_gadget_connect/disconnet
1572  */
1573 static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
1574 {
1575 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1576 
1577 	/* Data+ pullup controlled by OTG state machine in OTG fsm mode */
1578 	if (ci_otg_is_fsm_mode(ci))
1579 		return 0;
1580 
1581 	pm_runtime_get_sync(&ci->gadget.dev);
1582 	if (is_on)
1583 		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
1584 	else
1585 		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
1586 	pm_runtime_put_sync(&ci->gadget.dev);
1587 
1588 	return 0;
1589 }
1590 
1591 static int ci_udc_start(struct usb_gadget *gadget,
1592 			 struct usb_gadget_driver *driver);
1593 static int ci_udc_stop(struct usb_gadget *gadget);
1594 /**
1595  * Device operations part of the API to the USB controller hardware,
1596  * which don't involve endpoints (or i/o)
1597  * Check  "usb_gadget.h" for details
1598  */
1599 static const struct usb_gadget_ops usb_gadget_ops = {
1600 	.vbus_session	= ci_udc_vbus_session,
1601 	.wakeup		= ci_udc_wakeup,
1602 	.set_selfpowered	= ci_udc_selfpowered,
1603 	.pullup		= ci_udc_pullup,
1604 	.vbus_draw	= ci_udc_vbus_draw,
1605 	.udc_start	= ci_udc_start,
1606 	.udc_stop	= ci_udc_stop,
1607 };
1608 
1609 static int init_eps(struct ci_hdrc *ci)
1610 {
1611 	int retval = 0, i, j;
1612 
1613 	for (i = 0; i < ci->hw_ep_max/2; i++)
1614 		for (j = RX; j <= TX; j++) {
1615 			int k = i + j * ci->hw_ep_max/2;
1616 			struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
1617 
1618 			scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
1619 					(j == TX)  ? "in" : "out");
1620 
1621 			hwep->ci          = ci;
1622 			hwep->lock         = &ci->lock;
1623 			hwep->td_pool      = ci->td_pool;
1624 
1625 			hwep->ep.name      = hwep->name;
1626 			hwep->ep.ops       = &usb_ep_ops;
1627 			/*
1628 			 * for ep0: maxP defined in desc, for other
1629 			 * eps, maxP is set by epautoconfig() called
1630 			 * by gadget layer
1631 			 */
1632 			usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
1633 
1634 			INIT_LIST_HEAD(&hwep->qh.queue);
1635 			hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
1636 						     &hwep->qh.dma);
1637 			if (hwep->qh.ptr == NULL)
1638 				retval = -ENOMEM;
1639 			else
1640 				memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
1641 
1642 			/*
1643 			 * set up shorthands for ep0 out and in endpoints,
1644 			 * don't add to gadget's ep_list
1645 			 */
1646 			if (i == 0) {
1647 				if (j == RX)
1648 					ci->ep0out = hwep;
1649 				else
1650 					ci->ep0in = hwep;
1651 
1652 				usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
1653 				continue;
1654 			}
1655 
1656 			list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
1657 		}
1658 
1659 	return retval;
1660 }
1661 
1662 static void destroy_eps(struct ci_hdrc *ci)
1663 {
1664 	int i;
1665 
1666 	for (i = 0; i < ci->hw_ep_max; i++) {
1667 		struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1668 
1669 		if (hwep->pending_td)
1670 			free_pending_td(hwep);
1671 		dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
1672 	}
1673 }
1674 
1675 /**
1676  * ci_udc_start: register a gadget driver
1677  * @gadget: our gadget
1678  * @driver: the driver being registered
1679  *
1680  * Interrupts are enabled here.
1681  */
1682 static int ci_udc_start(struct usb_gadget *gadget,
1683 			 struct usb_gadget_driver *driver)
1684 {
1685 	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1686 	unsigned long flags;
1687 	int retval = -ENOMEM;
1688 
1689 	if (driver->disconnect == NULL)
1690 		return -EINVAL;
1691 
1692 
1693 	ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
1694 	retval = usb_ep_enable(&ci->ep0out->ep);
1695 	if (retval)
1696 		return retval;
1697 
1698 	ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
1699 	retval = usb_ep_enable(&ci->ep0in->ep);
1700 	if (retval)
1701 		return retval;
1702 
1703 	ci->driver = driver;
1704 
1705 	/* Start otg fsm for B-device */
1706 	if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
1707 		ci_hdrc_otg_fsm_start(ci);
1708 		return retval;
1709 	}
1710 
1711 	pm_runtime_get_sync(&ci->gadget.dev);
1712 	if (ci->vbus_active) {
1713 		spin_lock_irqsave(&ci->lock, flags);
1714 		hw_device_reset(ci);
1715 	} else {
1716 		usb_udc_vbus_handler(&ci->gadget, false);
1717 		pm_runtime_put_sync(&ci->gadget.dev);
1718 		return retval;
1719 	}
1720 
1721 	retval = hw_device_state(ci, ci->ep0out->qh.dma);
1722 	spin_unlock_irqrestore(&ci->lock, flags);
1723 	if (retval)
1724 		pm_runtime_put_sync(&ci->gadget.dev);
1725 
1726 	return retval;
1727 }
1728 
1729 /**
1730  * ci_udc_stop: unregister a gadget driver
1731  */
1732 static int ci_udc_stop(struct usb_gadget *gadget)
1733 {
1734 	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1735 	unsigned long flags;
1736 
1737 	spin_lock_irqsave(&ci->lock, flags);
1738 
1739 	if (ci->vbus_active) {
1740 		hw_device_state(ci, 0);
1741 		if (ci->platdata->notify_event)
1742 			ci->platdata->notify_event(ci,
1743 			CI_HDRC_CONTROLLER_STOPPED_EVENT);
1744 		spin_unlock_irqrestore(&ci->lock, flags);
1745 		_gadget_stop_activity(&ci->gadget);
1746 		spin_lock_irqsave(&ci->lock, flags);
1747 		pm_runtime_put(&ci->gadget.dev);
1748 	}
1749 
1750 	ci->driver = NULL;
1751 	spin_unlock_irqrestore(&ci->lock, flags);
1752 
1753 	return 0;
1754 }
1755 
1756 /******************************************************************************
1757  * BUS block
1758  *****************************************************************************/
1759 /**
1760  * udc_irq: ci interrupt handler
1761  *
1762  * This function returns IRQ_HANDLED if the IRQ has been handled
1763  * It locks access to registers
1764  */
1765 static irqreturn_t udc_irq(struct ci_hdrc *ci)
1766 {
1767 	irqreturn_t retval;
1768 	u32 intr;
1769 
1770 	if (ci == NULL)
1771 		return IRQ_HANDLED;
1772 
1773 	spin_lock(&ci->lock);
1774 
1775 	if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
1776 		if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
1777 				USBMODE_CM_DC) {
1778 			spin_unlock(&ci->lock);
1779 			return IRQ_NONE;
1780 		}
1781 	}
1782 	intr = hw_test_and_clear_intr_active(ci);
1783 
1784 	if (intr) {
1785 		/* order defines priority - do NOT change it */
1786 		if (USBi_URI & intr)
1787 			isr_reset_handler(ci);
1788 
1789 		if (USBi_PCI & intr) {
1790 			ci->gadget.speed = hw_port_is_high_speed(ci) ?
1791 				USB_SPEED_HIGH : USB_SPEED_FULL;
1792 			if (ci->suspended && ci->driver->resume) {
1793 				spin_unlock(&ci->lock);
1794 				ci->driver->resume(&ci->gadget);
1795 				spin_lock(&ci->lock);
1796 				ci->suspended = 0;
1797 			}
1798 		}
1799 
1800 		if (USBi_UI  & intr)
1801 			isr_tr_complete_handler(ci);
1802 
1803 		if (USBi_SLI & intr) {
1804 			if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
1805 			    ci->driver->suspend) {
1806 				ci->suspended = 1;
1807 				spin_unlock(&ci->lock);
1808 				ci->driver->suspend(&ci->gadget);
1809 				usb_gadget_set_state(&ci->gadget,
1810 						USB_STATE_SUSPENDED);
1811 				spin_lock(&ci->lock);
1812 			}
1813 		}
1814 		retval = IRQ_HANDLED;
1815 	} else {
1816 		retval = IRQ_NONE;
1817 	}
1818 	spin_unlock(&ci->lock);
1819 
1820 	return retval;
1821 }
1822 
1823 /**
1824  * udc_start: initialize gadget role
1825  * @ci: chipidea controller
1826  */
1827 static int udc_start(struct ci_hdrc *ci)
1828 {
1829 	struct device *dev = ci->dev;
1830 	int retval = 0;
1831 
1832 	spin_lock_init(&ci->lock);
1833 
1834 	ci->gadget.ops          = &usb_gadget_ops;
1835 	ci->gadget.speed        = USB_SPEED_UNKNOWN;
1836 	ci->gadget.max_speed    = USB_SPEED_HIGH;
1837 	ci->gadget.is_otg       = ci->is_otg ? 1 : 0;
1838 	ci->gadget.name         = ci->platdata->name;
1839 
1840 	INIT_LIST_HEAD(&ci->gadget.ep_list);
1841 
1842 	/* alloc resources */
1843 	ci->qh_pool = dma_pool_create("ci_hw_qh", dev,
1844 				       sizeof(struct ci_hw_qh),
1845 				       64, CI_HDRC_PAGE_SIZE);
1846 	if (ci->qh_pool == NULL)
1847 		return -ENOMEM;
1848 
1849 	ci->td_pool = dma_pool_create("ci_hw_td", dev,
1850 				       sizeof(struct ci_hw_td),
1851 				       64, CI_HDRC_PAGE_SIZE);
1852 	if (ci->td_pool == NULL) {
1853 		retval = -ENOMEM;
1854 		goto free_qh_pool;
1855 	}
1856 
1857 	retval = init_eps(ci);
1858 	if (retval)
1859 		goto free_pools;
1860 
1861 	ci->gadget.ep0 = &ci->ep0in->ep;
1862 
1863 	retval = usb_add_gadget_udc(dev, &ci->gadget);
1864 	if (retval)
1865 		goto destroy_eps;
1866 
1867 	pm_runtime_no_callbacks(&ci->gadget.dev);
1868 	pm_runtime_enable(&ci->gadget.dev);
1869 
1870 	return retval;
1871 
1872 destroy_eps:
1873 	destroy_eps(ci);
1874 free_pools:
1875 	dma_pool_destroy(ci->td_pool);
1876 free_qh_pool:
1877 	dma_pool_destroy(ci->qh_pool);
1878 	return retval;
1879 }
1880 
1881 /**
1882  * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
1883  *
1884  * No interrupts active, the IRQ has been released
1885  */
1886 void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
1887 {
1888 	if (!ci->roles[CI_ROLE_GADGET])
1889 		return;
1890 
1891 	usb_del_gadget_udc(&ci->gadget);
1892 
1893 	destroy_eps(ci);
1894 
1895 	dma_pool_destroy(ci->td_pool);
1896 	dma_pool_destroy(ci->qh_pool);
1897 }
1898 
1899 static int udc_id_switch_for_device(struct ci_hdrc *ci)
1900 {
1901 	if (ci->is_otg)
1902 		/* Clear and enable BSV irq */
1903 		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
1904 					OTGSC_BSVIS | OTGSC_BSVIE);
1905 
1906 	return 0;
1907 }
1908 
1909 static void udc_id_switch_for_host(struct ci_hdrc *ci)
1910 {
1911 	/*
1912 	 * host doesn't care B_SESSION_VALID event
1913 	 * so clear and disbale BSV irq
1914 	 */
1915 	if (ci->is_otg)
1916 		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
1917 }
1918 
1919 /**
1920  * ci_hdrc_gadget_init - initialize device related bits
1921  * ci: the controller
1922  *
1923  * This function initializes the gadget, if the device is "device capable".
1924  */
1925 int ci_hdrc_gadget_init(struct ci_hdrc *ci)
1926 {
1927 	struct ci_role_driver *rdrv;
1928 
1929 	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
1930 		return -ENXIO;
1931 
1932 	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
1933 	if (!rdrv)
1934 		return -ENOMEM;
1935 
1936 	rdrv->start	= udc_id_switch_for_device;
1937 	rdrv->stop	= udc_id_switch_for_host;
1938 	rdrv->irq	= udc_irq;
1939 	rdrv->name	= "gadget";
1940 	ci->roles[CI_ROLE_GADGET] = rdrv;
1941 
1942 	return udc_start(ci);
1943 }
1944