1 /* 2 * udc.c - ChipIdea UDC driver 3 * 4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. 5 * 6 * Author: David Lopo 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 13 #include <linux/delay.h> 14 #include <linux/device.h> 15 #include <linux/dmapool.h> 16 #include <linux/err.h> 17 #include <linux/irqreturn.h> 18 #include <linux/kernel.h> 19 #include <linux/slab.h> 20 #include <linux/pm_runtime.h> 21 #include <linux/usb/ch9.h> 22 #include <linux/usb/gadget.h> 23 #include <linux/usb/otg-fsm.h> 24 #include <linux/usb/chipidea.h> 25 26 #include "ci.h" 27 #include "udc.h" 28 #include "bits.h" 29 #include "otg.h" 30 #include "otg_fsm.h" 31 32 /* control endpoint description */ 33 static const struct usb_endpoint_descriptor 34 ctrl_endpt_out_desc = { 35 .bLength = USB_DT_ENDPOINT_SIZE, 36 .bDescriptorType = USB_DT_ENDPOINT, 37 38 .bEndpointAddress = USB_DIR_OUT, 39 .bmAttributes = USB_ENDPOINT_XFER_CONTROL, 40 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), 41 }; 42 43 static const struct usb_endpoint_descriptor 44 ctrl_endpt_in_desc = { 45 .bLength = USB_DT_ENDPOINT_SIZE, 46 .bDescriptorType = USB_DT_ENDPOINT, 47 48 .bEndpointAddress = USB_DIR_IN, 49 .bmAttributes = USB_ENDPOINT_XFER_CONTROL, 50 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), 51 }; 52 53 /** 54 * hw_ep_bit: calculates the bit number 55 * @num: endpoint number 56 * @dir: endpoint direction 57 * 58 * This function returns bit number 59 */ 60 static inline int hw_ep_bit(int num, int dir) 61 { 62 return num + ((dir == TX) ? 16 : 0); 63 } 64 65 static inline int ep_to_bit(struct ci_hdrc *ci, int n) 66 { 67 int fill = 16 - ci->hw_ep_max / 2; 68 69 if (n >= ci->hw_ep_max / 2) 70 n += fill; 71 72 return n; 73 } 74 75 /** 76 * hw_device_state: enables/disables interrupts (execute without interruption) 77 * @dma: 0 => disable, !0 => enable and set dma engine 78 * 79 * This function returns an error code 80 */ 81 static int hw_device_state(struct ci_hdrc *ci, u32 dma) 82 { 83 if (dma) { 84 hw_write(ci, OP_ENDPTLISTADDR, ~0, dma); 85 /* interrupt, error, port change, reset, sleep/suspend */ 86 hw_write(ci, OP_USBINTR, ~0, 87 USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); 88 } else { 89 hw_write(ci, OP_USBINTR, ~0, 0); 90 } 91 return 0; 92 } 93 94 /** 95 * hw_ep_flush: flush endpoint fifo (execute without interruption) 96 * @num: endpoint number 97 * @dir: endpoint direction 98 * 99 * This function returns an error code 100 */ 101 static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) 102 { 103 int n = hw_ep_bit(num, dir); 104 105 do { 106 /* flush any pending transfer */ 107 hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); 108 while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) 109 cpu_relax(); 110 } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); 111 112 return 0; 113 } 114 115 /** 116 * hw_ep_disable: disables endpoint (execute without interruption) 117 * @num: endpoint number 118 * @dir: endpoint direction 119 * 120 * This function returns an error code 121 */ 122 static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir) 123 { 124 hw_write(ci, OP_ENDPTCTRL + num, 125 (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); 126 return 0; 127 } 128 129 /** 130 * hw_ep_enable: enables endpoint (execute without interruption) 131 * @num: endpoint number 132 * @dir: endpoint direction 133 * @type: endpoint type 134 * 135 * This function returns an error code 136 */ 137 static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) 138 { 139 u32 mask, data; 140 141 if (dir == TX) { 142 mask = ENDPTCTRL_TXT; /* type */ 143 data = type << __ffs(mask); 144 145 mask |= ENDPTCTRL_TXS; /* unstall */ 146 mask |= ENDPTCTRL_TXR; /* reset data toggle */ 147 data |= ENDPTCTRL_TXR; 148 mask |= ENDPTCTRL_TXE; /* enable */ 149 data |= ENDPTCTRL_TXE; 150 } else { 151 mask = ENDPTCTRL_RXT; /* type */ 152 data = type << __ffs(mask); 153 154 mask |= ENDPTCTRL_RXS; /* unstall */ 155 mask |= ENDPTCTRL_RXR; /* reset data toggle */ 156 data |= ENDPTCTRL_RXR; 157 mask |= ENDPTCTRL_RXE; /* enable */ 158 data |= ENDPTCTRL_RXE; 159 } 160 hw_write(ci, OP_ENDPTCTRL + num, mask, data); 161 return 0; 162 } 163 164 /** 165 * hw_ep_get_halt: return endpoint halt status 166 * @num: endpoint number 167 * @dir: endpoint direction 168 * 169 * This function returns 1 if endpoint halted 170 */ 171 static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) 172 { 173 u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; 174 175 return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; 176 } 177 178 /** 179 * hw_ep_prime: primes endpoint (execute without interruption) 180 * @num: endpoint number 181 * @dir: endpoint direction 182 * @is_ctrl: true if control endpoint 183 * 184 * This function returns an error code 185 */ 186 static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) 187 { 188 int n = hw_ep_bit(num, dir); 189 190 /* Synchronize before ep prime */ 191 wmb(); 192 193 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) 194 return -EAGAIN; 195 196 hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); 197 198 while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) 199 cpu_relax(); 200 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) 201 return -EAGAIN; 202 203 /* status shoult be tested according with manual but it doesn't work */ 204 return 0; 205 } 206 207 /** 208 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute 209 * without interruption) 210 * @num: endpoint number 211 * @dir: endpoint direction 212 * @value: true => stall, false => unstall 213 * 214 * This function returns an error code 215 */ 216 static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value) 217 { 218 if (value != 0 && value != 1) 219 return -EINVAL; 220 221 do { 222 enum ci_hw_regs reg = OP_ENDPTCTRL + num; 223 u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; 224 u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; 225 226 /* data toggle - reserved for EP0 but it's in ESS */ 227 hw_write(ci, reg, mask_xs|mask_xr, 228 value ? mask_xs : mask_xr); 229 } while (value != hw_ep_get_halt(ci, num, dir)); 230 231 return 0; 232 } 233 234 /** 235 * hw_is_port_high_speed: test if port is high speed 236 * 237 * This function returns true if high speed port 238 */ 239 static int hw_port_is_high_speed(struct ci_hdrc *ci) 240 { 241 return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) : 242 hw_read(ci, OP_PORTSC, PORTSC_HSP); 243 } 244 245 /** 246 * hw_test_and_clear_complete: test & clear complete status (execute without 247 * interruption) 248 * @n: endpoint number 249 * 250 * This function returns complete status 251 */ 252 static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n) 253 { 254 n = ep_to_bit(ci, n); 255 return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n)); 256 } 257 258 /** 259 * hw_test_and_clear_intr_active: test & clear active interrupts (execute 260 * without interruption) 261 * 262 * This function returns active interrutps 263 */ 264 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci) 265 { 266 u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci); 267 268 hw_write(ci, OP_USBSTS, ~0, reg); 269 return reg; 270 } 271 272 /** 273 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without 274 * interruption) 275 * 276 * This function returns guard value 277 */ 278 static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci) 279 { 280 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0); 281 } 282 283 /** 284 * hw_test_and_set_setup_guard: test & set setup guard (execute without 285 * interruption) 286 * 287 * This function returns guard value 288 */ 289 static int hw_test_and_set_setup_guard(struct ci_hdrc *ci) 290 { 291 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); 292 } 293 294 /** 295 * hw_usb_set_address: configures USB address (execute without interruption) 296 * @value: new USB address 297 * 298 * This function explicitly sets the address, without the "USBADRA" (advance) 299 * feature, which is not supported by older versions of the controller. 300 */ 301 static void hw_usb_set_address(struct ci_hdrc *ci, u8 value) 302 { 303 hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, 304 value << __ffs(DEVICEADDR_USBADR)); 305 } 306 307 /** 308 * hw_usb_reset: restart device after a bus reset (execute without 309 * interruption) 310 * 311 * This function returns an error code 312 */ 313 static int hw_usb_reset(struct ci_hdrc *ci) 314 { 315 hw_usb_set_address(ci, 0); 316 317 /* ESS flushes only at end?!? */ 318 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); 319 320 /* clear setup token semaphores */ 321 hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0); 322 323 /* clear complete status */ 324 hw_write(ci, OP_ENDPTCOMPLETE, 0, 0); 325 326 /* wait until all bits cleared */ 327 while (hw_read(ci, OP_ENDPTPRIME, ~0)) 328 udelay(10); /* not RTOS friendly */ 329 330 /* reset all endpoints ? */ 331 332 /* reset internal status and wait for further instructions 333 no need to verify the port reset status (ESS does it) */ 334 335 return 0; 336 } 337 338 /****************************************************************************** 339 * UTIL block 340 *****************************************************************************/ 341 342 static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, 343 unsigned length) 344 { 345 int i; 346 u32 temp; 347 struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node), 348 GFP_ATOMIC); 349 350 if (node == NULL) 351 return -ENOMEM; 352 353 node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma); 354 if (node->ptr == NULL) { 355 kfree(node); 356 return -ENOMEM; 357 } 358 359 node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES)); 360 node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES); 361 node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE); 362 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) { 363 u32 mul = hwreq->req.length / hwep->ep.maxpacket; 364 365 if (hwreq->req.length == 0 366 || hwreq->req.length % hwep->ep.maxpacket) 367 mul++; 368 node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO)); 369 } 370 371 temp = (u32) (hwreq->req.dma + hwreq->req.actual); 372 if (length) { 373 node->ptr->page[0] = cpu_to_le32(temp); 374 for (i = 1; i < TD_PAGE_COUNT; i++) { 375 u32 page = temp + i * CI_HDRC_PAGE_SIZE; 376 page &= ~TD_RESERVED_MASK; 377 node->ptr->page[i] = cpu_to_le32(page); 378 } 379 } 380 381 hwreq->req.actual += length; 382 383 if (!list_empty(&hwreq->tds)) { 384 /* get the last entry */ 385 lastnode = list_entry(hwreq->tds.prev, 386 struct td_node, td); 387 lastnode->ptr->next = cpu_to_le32(node->dma); 388 } 389 390 INIT_LIST_HEAD(&node->td); 391 list_add_tail(&node->td, &hwreq->tds); 392 393 return 0; 394 } 395 396 /** 397 * _usb_addr: calculates endpoint address from direction & number 398 * @ep: endpoint 399 */ 400 static inline u8 _usb_addr(struct ci_hw_ep *ep) 401 { 402 return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; 403 } 404 405 /** 406 * _hardware_enqueue: configures a request at hardware level 407 * @hwep: endpoint 408 * @hwreq: request 409 * 410 * This function returns an error code 411 */ 412 static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) 413 { 414 struct ci_hdrc *ci = hwep->ci; 415 int ret = 0; 416 unsigned rest = hwreq->req.length; 417 int pages = TD_PAGE_COUNT; 418 struct td_node *firstnode, *lastnode; 419 420 /* don't queue twice */ 421 if (hwreq->req.status == -EALREADY) 422 return -EALREADY; 423 424 hwreq->req.status = -EALREADY; 425 426 ret = usb_gadget_map_request_by_dev(ci->dev->parent, 427 &hwreq->req, hwep->dir); 428 if (ret) 429 return ret; 430 431 /* 432 * The first buffer could be not page aligned. 433 * In that case we have to span into one extra td. 434 */ 435 if (hwreq->req.dma % PAGE_SIZE) 436 pages--; 437 438 if (rest == 0) { 439 ret = add_td_to_list(hwep, hwreq, 0); 440 if (ret < 0) 441 goto done; 442 } 443 444 while (rest > 0) { 445 unsigned count = min(hwreq->req.length - hwreq->req.actual, 446 (unsigned)(pages * CI_HDRC_PAGE_SIZE)); 447 ret = add_td_to_list(hwep, hwreq, count); 448 if (ret < 0) 449 goto done; 450 451 rest -= count; 452 } 453 454 if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX 455 && (hwreq->req.length % hwep->ep.maxpacket == 0)) { 456 ret = add_td_to_list(hwep, hwreq, 0); 457 if (ret < 0) 458 goto done; 459 } 460 461 firstnode = list_first_entry(&hwreq->tds, struct td_node, td); 462 463 lastnode = list_entry(hwreq->tds.prev, 464 struct td_node, td); 465 466 lastnode->ptr->next = cpu_to_le32(TD_TERMINATE); 467 if (!hwreq->req.no_interrupt) 468 lastnode->ptr->token |= cpu_to_le32(TD_IOC); 469 wmb(); 470 471 hwreq->req.actual = 0; 472 if (!list_empty(&hwep->qh.queue)) { 473 struct ci_hw_req *hwreqprev; 474 int n = hw_ep_bit(hwep->num, hwep->dir); 475 int tmp_stat; 476 struct td_node *prevlastnode; 477 u32 next = firstnode->dma & TD_ADDR_MASK; 478 479 hwreqprev = list_entry(hwep->qh.queue.prev, 480 struct ci_hw_req, queue); 481 prevlastnode = list_entry(hwreqprev->tds.prev, 482 struct td_node, td); 483 484 prevlastnode->ptr->next = cpu_to_le32(next); 485 wmb(); 486 if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) 487 goto done; 488 do { 489 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); 490 tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n)); 491 } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW)); 492 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0); 493 if (tmp_stat) 494 goto done; 495 } 496 497 /* QH configuration */ 498 hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma); 499 hwep->qh.ptr->td.token &= 500 cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE)); 501 502 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) { 503 u32 mul = hwreq->req.length / hwep->ep.maxpacket; 504 505 if (hwreq->req.length == 0 506 || hwreq->req.length % hwep->ep.maxpacket) 507 mul++; 508 hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT)); 509 } 510 511 ret = hw_ep_prime(ci, hwep->num, hwep->dir, 512 hwep->type == USB_ENDPOINT_XFER_CONTROL); 513 done: 514 return ret; 515 } 516 517 /* 518 * free_pending_td: remove a pending request for the endpoint 519 * @hwep: endpoint 520 */ 521 static void free_pending_td(struct ci_hw_ep *hwep) 522 { 523 struct td_node *pending = hwep->pending_td; 524 525 dma_pool_free(hwep->td_pool, pending->ptr, pending->dma); 526 hwep->pending_td = NULL; 527 kfree(pending); 528 } 529 530 static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep, 531 struct td_node *node) 532 { 533 hwep->qh.ptr->td.next = cpu_to_le32(node->dma); 534 hwep->qh.ptr->td.token &= 535 cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE)); 536 537 return hw_ep_prime(ci, hwep->num, hwep->dir, 538 hwep->type == USB_ENDPOINT_XFER_CONTROL); 539 } 540 541 /** 542 * _hardware_dequeue: handles a request at hardware level 543 * @gadget: gadget 544 * @hwep: endpoint 545 * 546 * This function returns an error code 547 */ 548 static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) 549 { 550 u32 tmptoken; 551 struct td_node *node, *tmpnode; 552 unsigned remaining_length; 553 unsigned actual = hwreq->req.length; 554 struct ci_hdrc *ci = hwep->ci; 555 556 if (hwreq->req.status != -EALREADY) 557 return -EINVAL; 558 559 hwreq->req.status = 0; 560 561 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { 562 tmptoken = le32_to_cpu(node->ptr->token); 563 if ((TD_STATUS_ACTIVE & tmptoken) != 0) { 564 int n = hw_ep_bit(hwep->num, hwep->dir); 565 566 if (ci->rev == CI_REVISION_24) 567 if (!hw_read(ci, OP_ENDPTSTAT, BIT(n))) 568 reprime_dtd(ci, hwep, node); 569 hwreq->req.status = -EALREADY; 570 return -EBUSY; 571 } 572 573 remaining_length = (tmptoken & TD_TOTAL_BYTES); 574 remaining_length >>= __ffs(TD_TOTAL_BYTES); 575 actual -= remaining_length; 576 577 hwreq->req.status = tmptoken & TD_STATUS; 578 if ((TD_STATUS_HALTED & hwreq->req.status)) { 579 hwreq->req.status = -EPIPE; 580 break; 581 } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) { 582 hwreq->req.status = -EPROTO; 583 break; 584 } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) { 585 hwreq->req.status = -EILSEQ; 586 break; 587 } 588 589 if (remaining_length) { 590 if (hwep->dir == TX) { 591 hwreq->req.status = -EPROTO; 592 break; 593 } 594 } 595 /* 596 * As the hardware could still address the freed td 597 * which will run the udc unusable, the cleanup of the 598 * td has to be delayed by one. 599 */ 600 if (hwep->pending_td) 601 free_pending_td(hwep); 602 603 hwep->pending_td = node; 604 list_del_init(&node->td); 605 } 606 607 usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent, 608 &hwreq->req, hwep->dir); 609 610 hwreq->req.actual += actual; 611 612 if (hwreq->req.status) 613 return hwreq->req.status; 614 615 return hwreq->req.actual; 616 } 617 618 /** 619 * _ep_nuke: dequeues all endpoint requests 620 * @hwep: endpoint 621 * 622 * This function returns an error code 623 * Caller must hold lock 624 */ 625 static int _ep_nuke(struct ci_hw_ep *hwep) 626 __releases(hwep->lock) 627 __acquires(hwep->lock) 628 { 629 struct td_node *node, *tmpnode; 630 if (hwep == NULL) 631 return -EINVAL; 632 633 hw_ep_flush(hwep->ci, hwep->num, hwep->dir); 634 635 while (!list_empty(&hwep->qh.queue)) { 636 637 /* pop oldest request */ 638 struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next, 639 struct ci_hw_req, queue); 640 641 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { 642 dma_pool_free(hwep->td_pool, node->ptr, node->dma); 643 list_del_init(&node->td); 644 node->ptr = NULL; 645 kfree(node); 646 } 647 648 list_del_init(&hwreq->queue); 649 hwreq->req.status = -ESHUTDOWN; 650 651 if (hwreq->req.complete != NULL) { 652 spin_unlock(hwep->lock); 653 usb_gadget_giveback_request(&hwep->ep, &hwreq->req); 654 spin_lock(hwep->lock); 655 } 656 } 657 658 if (hwep->pending_td) 659 free_pending_td(hwep); 660 661 return 0; 662 } 663 664 static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer) 665 { 666 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 667 int direction, retval = 0; 668 unsigned long flags; 669 670 if (ep == NULL || hwep->ep.desc == NULL) 671 return -EINVAL; 672 673 if (usb_endpoint_xfer_isoc(hwep->ep.desc)) 674 return -EOPNOTSUPP; 675 676 spin_lock_irqsave(hwep->lock, flags); 677 678 if (value && hwep->dir == TX && check_transfer && 679 !list_empty(&hwep->qh.queue) && 680 !usb_endpoint_xfer_control(hwep->ep.desc)) { 681 spin_unlock_irqrestore(hwep->lock, flags); 682 return -EAGAIN; 683 } 684 685 direction = hwep->dir; 686 do { 687 retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value); 688 689 if (!value) 690 hwep->wedge = 0; 691 692 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) 693 hwep->dir = (hwep->dir == TX) ? RX : TX; 694 695 } while (hwep->dir != direction); 696 697 spin_unlock_irqrestore(hwep->lock, flags); 698 return retval; 699 } 700 701 702 /** 703 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts 704 * @gadget: gadget 705 * 706 * This function returns an error code 707 */ 708 static int _gadget_stop_activity(struct usb_gadget *gadget) 709 { 710 struct usb_ep *ep; 711 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); 712 unsigned long flags; 713 714 spin_lock_irqsave(&ci->lock, flags); 715 ci->gadget.speed = USB_SPEED_UNKNOWN; 716 ci->remote_wakeup = 0; 717 ci->suspended = 0; 718 spin_unlock_irqrestore(&ci->lock, flags); 719 720 /* flush all endpoints */ 721 gadget_for_each_ep(ep, gadget) { 722 usb_ep_fifo_flush(ep); 723 } 724 usb_ep_fifo_flush(&ci->ep0out->ep); 725 usb_ep_fifo_flush(&ci->ep0in->ep); 726 727 /* make sure to disable all endpoints */ 728 gadget_for_each_ep(ep, gadget) { 729 usb_ep_disable(ep); 730 } 731 732 if (ci->status != NULL) { 733 usb_ep_free_request(&ci->ep0in->ep, ci->status); 734 ci->status = NULL; 735 } 736 737 return 0; 738 } 739 740 /****************************************************************************** 741 * ISR block 742 *****************************************************************************/ 743 /** 744 * isr_reset_handler: USB reset interrupt handler 745 * @ci: UDC device 746 * 747 * This function resets USB engine after a bus reset occurred 748 */ 749 static void isr_reset_handler(struct ci_hdrc *ci) 750 __releases(ci->lock) 751 __acquires(ci->lock) 752 { 753 int retval; 754 755 spin_unlock(&ci->lock); 756 if (ci->gadget.speed != USB_SPEED_UNKNOWN) 757 usb_gadget_udc_reset(&ci->gadget, ci->driver); 758 759 retval = _gadget_stop_activity(&ci->gadget); 760 if (retval) 761 goto done; 762 763 retval = hw_usb_reset(ci); 764 if (retval) 765 goto done; 766 767 ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC); 768 if (ci->status == NULL) 769 retval = -ENOMEM; 770 771 done: 772 spin_lock(&ci->lock); 773 774 if (retval) 775 dev_err(ci->dev, "error: %i\n", retval); 776 } 777 778 /** 779 * isr_get_status_complete: get_status request complete function 780 * @ep: endpoint 781 * @req: request handled 782 * 783 * Caller must release lock 784 */ 785 static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) 786 { 787 if (ep == NULL || req == NULL) 788 return; 789 790 kfree(req->buf); 791 usb_ep_free_request(ep, req); 792 } 793 794 /** 795 * _ep_queue: queues (submits) an I/O request to an endpoint 796 * @ep: endpoint 797 * @req: request 798 * @gfp_flags: GFP flags (not used) 799 * 800 * Caller must hold lock 801 * This function returns an error code 802 */ 803 static int _ep_queue(struct usb_ep *ep, struct usb_request *req, 804 gfp_t __maybe_unused gfp_flags) 805 { 806 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 807 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); 808 struct ci_hdrc *ci = hwep->ci; 809 int retval = 0; 810 811 if (ep == NULL || req == NULL || hwep->ep.desc == NULL) 812 return -EINVAL; 813 814 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) { 815 if (req->length) 816 hwep = (ci->ep0_dir == RX) ? 817 ci->ep0out : ci->ep0in; 818 if (!list_empty(&hwep->qh.queue)) { 819 _ep_nuke(hwep); 820 dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n", 821 _usb_addr(hwep)); 822 } 823 } 824 825 if (usb_endpoint_xfer_isoc(hwep->ep.desc) && 826 hwreq->req.length > hwep->ep.mult * hwep->ep.maxpacket) { 827 dev_err(hwep->ci->dev, "request length too big for isochronous\n"); 828 return -EMSGSIZE; 829 } 830 831 /* first nuke then test link, e.g. previous status has not sent */ 832 if (!list_empty(&hwreq->queue)) { 833 dev_err(hwep->ci->dev, "request already in queue\n"); 834 return -EBUSY; 835 } 836 837 /* push request */ 838 hwreq->req.status = -EINPROGRESS; 839 hwreq->req.actual = 0; 840 841 retval = _hardware_enqueue(hwep, hwreq); 842 843 if (retval == -EALREADY) 844 retval = 0; 845 if (!retval) 846 list_add_tail(&hwreq->queue, &hwep->qh.queue); 847 848 return retval; 849 } 850 851 /** 852 * isr_get_status_response: get_status request response 853 * @ci: ci struct 854 * @setup: setup request packet 855 * 856 * This function returns an error code 857 */ 858 static int isr_get_status_response(struct ci_hdrc *ci, 859 struct usb_ctrlrequest *setup) 860 __releases(hwep->lock) 861 __acquires(hwep->lock) 862 { 863 struct ci_hw_ep *hwep = ci->ep0in; 864 struct usb_request *req = NULL; 865 gfp_t gfp_flags = GFP_ATOMIC; 866 int dir, num, retval; 867 868 if (hwep == NULL || setup == NULL) 869 return -EINVAL; 870 871 spin_unlock(hwep->lock); 872 req = usb_ep_alloc_request(&hwep->ep, gfp_flags); 873 spin_lock(hwep->lock); 874 if (req == NULL) 875 return -ENOMEM; 876 877 req->complete = isr_get_status_complete; 878 req->length = 2; 879 req->buf = kzalloc(req->length, gfp_flags); 880 if (req->buf == NULL) { 881 retval = -ENOMEM; 882 goto err_free_req; 883 } 884 885 if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { 886 *(u16 *)req->buf = (ci->remote_wakeup << 1) | 887 ci->gadget.is_selfpowered; 888 } else if ((setup->bRequestType & USB_RECIP_MASK) \ 889 == USB_RECIP_ENDPOINT) { 890 dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? 891 TX : RX; 892 num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; 893 *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir); 894 } 895 /* else do nothing; reserved for future use */ 896 897 retval = _ep_queue(&hwep->ep, req, gfp_flags); 898 if (retval) 899 goto err_free_buf; 900 901 return 0; 902 903 err_free_buf: 904 kfree(req->buf); 905 err_free_req: 906 spin_unlock(hwep->lock); 907 usb_ep_free_request(&hwep->ep, req); 908 spin_lock(hwep->lock); 909 return retval; 910 } 911 912 /** 913 * isr_setup_status_complete: setup_status request complete function 914 * @ep: endpoint 915 * @req: request handled 916 * 917 * Caller must release lock. Put the port in test mode if test mode 918 * feature is selected. 919 */ 920 static void 921 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) 922 { 923 struct ci_hdrc *ci = req->context; 924 unsigned long flags; 925 926 if (ci->setaddr) { 927 hw_usb_set_address(ci, ci->address); 928 ci->setaddr = false; 929 if (ci->address) 930 usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS); 931 } 932 933 spin_lock_irqsave(&ci->lock, flags); 934 if (ci->test_mode) 935 hw_port_test_set(ci, ci->test_mode); 936 spin_unlock_irqrestore(&ci->lock, flags); 937 } 938 939 /** 940 * isr_setup_status_phase: queues the status phase of a setup transation 941 * @ci: ci struct 942 * 943 * This function returns an error code 944 */ 945 static int isr_setup_status_phase(struct ci_hdrc *ci) 946 { 947 int retval; 948 struct ci_hw_ep *hwep; 949 950 /* 951 * Unexpected USB controller behavior, caused by bad signal integrity 952 * or ground reference problems, can lead to isr_setup_status_phase 953 * being called with ci->status equal to NULL. 954 * If this situation occurs, you should review your USB hardware design. 955 */ 956 if (WARN_ON_ONCE(!ci->status)) 957 return -EPIPE; 958 959 hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; 960 ci->status->context = ci; 961 ci->status->complete = isr_setup_status_complete; 962 963 retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC); 964 965 return retval; 966 } 967 968 /** 969 * isr_tr_complete_low: transaction complete low level handler 970 * @hwep: endpoint 971 * 972 * This function returns an error code 973 * Caller must hold lock 974 */ 975 static int isr_tr_complete_low(struct ci_hw_ep *hwep) 976 __releases(hwep->lock) 977 __acquires(hwep->lock) 978 { 979 struct ci_hw_req *hwreq, *hwreqtemp; 980 struct ci_hw_ep *hweptemp = hwep; 981 int retval = 0; 982 983 list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue, 984 queue) { 985 retval = _hardware_dequeue(hwep, hwreq); 986 if (retval < 0) 987 break; 988 list_del_init(&hwreq->queue); 989 if (hwreq->req.complete != NULL) { 990 spin_unlock(hwep->lock); 991 if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) && 992 hwreq->req.length) 993 hweptemp = hwep->ci->ep0in; 994 usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req); 995 spin_lock(hwep->lock); 996 } 997 } 998 999 if (retval == -EBUSY) 1000 retval = 0; 1001 1002 return retval; 1003 } 1004 1005 static int otg_a_alt_hnp_support(struct ci_hdrc *ci) 1006 { 1007 dev_warn(&ci->gadget.dev, 1008 "connect the device to an alternate port if you want HNP\n"); 1009 return isr_setup_status_phase(ci); 1010 } 1011 1012 /** 1013 * isr_setup_packet_handler: setup packet handler 1014 * @ci: UDC descriptor 1015 * 1016 * This function handles setup packet 1017 */ 1018 static void isr_setup_packet_handler(struct ci_hdrc *ci) 1019 __releases(ci->lock) 1020 __acquires(ci->lock) 1021 { 1022 struct ci_hw_ep *hwep = &ci->ci_hw_ep[0]; 1023 struct usb_ctrlrequest req; 1024 int type, num, dir, err = -EINVAL; 1025 u8 tmode = 0; 1026 1027 /* 1028 * Flush data and handshake transactions of previous 1029 * setup packet. 1030 */ 1031 _ep_nuke(ci->ep0out); 1032 _ep_nuke(ci->ep0in); 1033 1034 /* read_setup_packet */ 1035 do { 1036 hw_test_and_set_setup_guard(ci); 1037 memcpy(&req, &hwep->qh.ptr->setup, sizeof(req)); 1038 } while (!hw_test_and_clear_setup_guard(ci)); 1039 1040 type = req.bRequestType; 1041 1042 ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; 1043 1044 switch (req.bRequest) { 1045 case USB_REQ_CLEAR_FEATURE: 1046 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && 1047 le16_to_cpu(req.wValue) == 1048 USB_ENDPOINT_HALT) { 1049 if (req.wLength != 0) 1050 break; 1051 num = le16_to_cpu(req.wIndex); 1052 dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; 1053 num &= USB_ENDPOINT_NUMBER_MASK; 1054 if (dir == TX) 1055 num += ci->hw_ep_max / 2; 1056 if (!ci->ci_hw_ep[num].wedge) { 1057 spin_unlock(&ci->lock); 1058 err = usb_ep_clear_halt( 1059 &ci->ci_hw_ep[num].ep); 1060 spin_lock(&ci->lock); 1061 if (err) 1062 break; 1063 } 1064 err = isr_setup_status_phase(ci); 1065 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && 1066 le16_to_cpu(req.wValue) == 1067 USB_DEVICE_REMOTE_WAKEUP) { 1068 if (req.wLength != 0) 1069 break; 1070 ci->remote_wakeup = 0; 1071 err = isr_setup_status_phase(ci); 1072 } else { 1073 goto delegate; 1074 } 1075 break; 1076 case USB_REQ_GET_STATUS: 1077 if ((type != (USB_DIR_IN|USB_RECIP_DEVICE) || 1078 le16_to_cpu(req.wIndex) == OTG_STS_SELECTOR) && 1079 type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && 1080 type != (USB_DIR_IN|USB_RECIP_INTERFACE)) 1081 goto delegate; 1082 if (le16_to_cpu(req.wLength) != 2 || 1083 le16_to_cpu(req.wValue) != 0) 1084 break; 1085 err = isr_get_status_response(ci, &req); 1086 break; 1087 case USB_REQ_SET_ADDRESS: 1088 if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) 1089 goto delegate; 1090 if (le16_to_cpu(req.wLength) != 0 || 1091 le16_to_cpu(req.wIndex) != 0) 1092 break; 1093 ci->address = (u8)le16_to_cpu(req.wValue); 1094 ci->setaddr = true; 1095 err = isr_setup_status_phase(ci); 1096 break; 1097 case USB_REQ_SET_FEATURE: 1098 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && 1099 le16_to_cpu(req.wValue) == 1100 USB_ENDPOINT_HALT) { 1101 if (req.wLength != 0) 1102 break; 1103 num = le16_to_cpu(req.wIndex); 1104 dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; 1105 num &= USB_ENDPOINT_NUMBER_MASK; 1106 if (dir == TX) 1107 num += ci->hw_ep_max / 2; 1108 1109 spin_unlock(&ci->lock); 1110 err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false); 1111 spin_lock(&ci->lock); 1112 if (!err) 1113 isr_setup_status_phase(ci); 1114 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { 1115 if (req.wLength != 0) 1116 break; 1117 switch (le16_to_cpu(req.wValue)) { 1118 case USB_DEVICE_REMOTE_WAKEUP: 1119 ci->remote_wakeup = 1; 1120 err = isr_setup_status_phase(ci); 1121 break; 1122 case USB_DEVICE_TEST_MODE: 1123 tmode = le16_to_cpu(req.wIndex) >> 8; 1124 switch (tmode) { 1125 case TEST_J: 1126 case TEST_K: 1127 case TEST_SE0_NAK: 1128 case TEST_PACKET: 1129 case TEST_FORCE_EN: 1130 ci->test_mode = tmode; 1131 err = isr_setup_status_phase( 1132 ci); 1133 break; 1134 default: 1135 break; 1136 } 1137 break; 1138 case USB_DEVICE_B_HNP_ENABLE: 1139 if (ci_otg_is_fsm_mode(ci)) { 1140 ci->gadget.b_hnp_enable = 1; 1141 err = isr_setup_status_phase( 1142 ci); 1143 } 1144 break; 1145 case USB_DEVICE_A_ALT_HNP_SUPPORT: 1146 if (ci_otg_is_fsm_mode(ci)) 1147 err = otg_a_alt_hnp_support(ci); 1148 break; 1149 case USB_DEVICE_A_HNP_SUPPORT: 1150 if (ci_otg_is_fsm_mode(ci)) { 1151 ci->gadget.a_hnp_support = 1; 1152 err = isr_setup_status_phase( 1153 ci); 1154 } 1155 break; 1156 default: 1157 goto delegate; 1158 } 1159 } else { 1160 goto delegate; 1161 } 1162 break; 1163 default: 1164 delegate: 1165 if (req.wLength == 0) /* no data phase */ 1166 ci->ep0_dir = TX; 1167 1168 spin_unlock(&ci->lock); 1169 err = ci->driver->setup(&ci->gadget, &req); 1170 spin_lock(&ci->lock); 1171 break; 1172 } 1173 1174 if (err < 0) { 1175 spin_unlock(&ci->lock); 1176 if (_ep_set_halt(&hwep->ep, 1, false)) 1177 dev_err(ci->dev, "error: _ep_set_halt\n"); 1178 spin_lock(&ci->lock); 1179 } 1180 } 1181 1182 /** 1183 * isr_tr_complete_handler: transaction complete interrupt handler 1184 * @ci: UDC descriptor 1185 * 1186 * This function handles traffic events 1187 */ 1188 static void isr_tr_complete_handler(struct ci_hdrc *ci) 1189 __releases(ci->lock) 1190 __acquires(ci->lock) 1191 { 1192 unsigned i; 1193 int err; 1194 1195 for (i = 0; i < ci->hw_ep_max; i++) { 1196 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; 1197 1198 if (hwep->ep.desc == NULL) 1199 continue; /* not configured */ 1200 1201 if (hw_test_and_clear_complete(ci, i)) { 1202 err = isr_tr_complete_low(hwep); 1203 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) { 1204 if (err > 0) /* needs status phase */ 1205 err = isr_setup_status_phase(ci); 1206 if (err < 0) { 1207 spin_unlock(&ci->lock); 1208 if (_ep_set_halt(&hwep->ep, 1, false)) 1209 dev_err(ci->dev, 1210 "error: _ep_set_halt\n"); 1211 spin_lock(&ci->lock); 1212 } 1213 } 1214 } 1215 1216 /* Only handle setup packet below */ 1217 if (i == 0 && 1218 hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0))) 1219 isr_setup_packet_handler(ci); 1220 } 1221 } 1222 1223 /****************************************************************************** 1224 * ENDPT block 1225 *****************************************************************************/ 1226 /** 1227 * ep_enable: configure endpoint, making it usable 1228 * 1229 * Check usb_ep_enable() at "usb_gadget.h" for details 1230 */ 1231 static int ep_enable(struct usb_ep *ep, 1232 const struct usb_endpoint_descriptor *desc) 1233 { 1234 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1235 int retval = 0; 1236 unsigned long flags; 1237 u32 cap = 0; 1238 1239 if (ep == NULL || desc == NULL) 1240 return -EINVAL; 1241 1242 spin_lock_irqsave(hwep->lock, flags); 1243 1244 /* only internal SW should enable ctrl endpts */ 1245 1246 if (!list_empty(&hwep->qh.queue)) { 1247 dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n"); 1248 spin_unlock_irqrestore(hwep->lock, flags); 1249 return -EBUSY; 1250 } 1251 1252 hwep->ep.desc = desc; 1253 1254 hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX; 1255 hwep->num = usb_endpoint_num(desc); 1256 hwep->type = usb_endpoint_type(desc); 1257 1258 hwep->ep.maxpacket = usb_endpoint_maxp(desc); 1259 hwep->ep.mult = usb_endpoint_maxp_mult(desc); 1260 1261 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) 1262 cap |= QH_IOS; 1263 1264 cap |= QH_ZLT; 1265 cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT; 1266 /* 1267 * For ISO-TX, we set mult at QH as the largest value, and use 1268 * MultO at TD as real mult value. 1269 */ 1270 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) 1271 cap |= 3 << __ffs(QH_MULT); 1272 1273 hwep->qh.ptr->cap = cpu_to_le32(cap); 1274 1275 hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */ 1276 1277 if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) { 1278 dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n"); 1279 retval = -EINVAL; 1280 } 1281 1282 /* 1283 * Enable endpoints in the HW other than ep0 as ep0 1284 * is always enabled 1285 */ 1286 if (hwep->num) 1287 retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir, 1288 hwep->type); 1289 1290 spin_unlock_irqrestore(hwep->lock, flags); 1291 return retval; 1292 } 1293 1294 /** 1295 * ep_disable: endpoint is no longer usable 1296 * 1297 * Check usb_ep_disable() at "usb_gadget.h" for details 1298 */ 1299 static int ep_disable(struct usb_ep *ep) 1300 { 1301 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1302 int direction, retval = 0; 1303 unsigned long flags; 1304 1305 if (ep == NULL) 1306 return -EINVAL; 1307 else if (hwep->ep.desc == NULL) 1308 return -EBUSY; 1309 1310 spin_lock_irqsave(hwep->lock, flags); 1311 1312 /* only internal SW should disable ctrl endpts */ 1313 1314 direction = hwep->dir; 1315 do { 1316 retval |= _ep_nuke(hwep); 1317 retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir); 1318 1319 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) 1320 hwep->dir = (hwep->dir == TX) ? RX : TX; 1321 1322 } while (hwep->dir != direction); 1323 1324 hwep->ep.desc = NULL; 1325 1326 spin_unlock_irqrestore(hwep->lock, flags); 1327 return retval; 1328 } 1329 1330 /** 1331 * ep_alloc_request: allocate a request object to use with this endpoint 1332 * 1333 * Check usb_ep_alloc_request() at "usb_gadget.h" for details 1334 */ 1335 static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) 1336 { 1337 struct ci_hw_req *hwreq = NULL; 1338 1339 if (ep == NULL) 1340 return NULL; 1341 1342 hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags); 1343 if (hwreq != NULL) { 1344 INIT_LIST_HEAD(&hwreq->queue); 1345 INIT_LIST_HEAD(&hwreq->tds); 1346 } 1347 1348 return (hwreq == NULL) ? NULL : &hwreq->req; 1349 } 1350 1351 /** 1352 * ep_free_request: frees a request object 1353 * 1354 * Check usb_ep_free_request() at "usb_gadget.h" for details 1355 */ 1356 static void ep_free_request(struct usb_ep *ep, struct usb_request *req) 1357 { 1358 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1359 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); 1360 struct td_node *node, *tmpnode; 1361 unsigned long flags; 1362 1363 if (ep == NULL || req == NULL) { 1364 return; 1365 } else if (!list_empty(&hwreq->queue)) { 1366 dev_err(hwep->ci->dev, "freeing queued request\n"); 1367 return; 1368 } 1369 1370 spin_lock_irqsave(hwep->lock, flags); 1371 1372 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { 1373 dma_pool_free(hwep->td_pool, node->ptr, node->dma); 1374 list_del_init(&node->td); 1375 node->ptr = NULL; 1376 kfree(node); 1377 } 1378 1379 kfree(hwreq); 1380 1381 spin_unlock_irqrestore(hwep->lock, flags); 1382 } 1383 1384 /** 1385 * ep_queue: queues (submits) an I/O request to an endpoint 1386 * 1387 * Check usb_ep_queue()* at usb_gadget.h" for details 1388 */ 1389 static int ep_queue(struct usb_ep *ep, struct usb_request *req, 1390 gfp_t __maybe_unused gfp_flags) 1391 { 1392 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1393 int retval = 0; 1394 unsigned long flags; 1395 1396 if (ep == NULL || req == NULL || hwep->ep.desc == NULL) 1397 return -EINVAL; 1398 1399 spin_lock_irqsave(hwep->lock, flags); 1400 retval = _ep_queue(ep, req, gfp_flags); 1401 spin_unlock_irqrestore(hwep->lock, flags); 1402 return retval; 1403 } 1404 1405 /** 1406 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint 1407 * 1408 * Check usb_ep_dequeue() at "usb_gadget.h" for details 1409 */ 1410 static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) 1411 { 1412 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1413 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); 1414 unsigned long flags; 1415 struct td_node *node, *tmpnode; 1416 1417 if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY || 1418 hwep->ep.desc == NULL || list_empty(&hwreq->queue) || 1419 list_empty(&hwep->qh.queue)) 1420 return -EINVAL; 1421 1422 spin_lock_irqsave(hwep->lock, flags); 1423 1424 hw_ep_flush(hwep->ci, hwep->num, hwep->dir); 1425 1426 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { 1427 dma_pool_free(hwep->td_pool, node->ptr, node->dma); 1428 list_del(&node->td); 1429 kfree(node); 1430 } 1431 1432 /* pop request */ 1433 list_del_init(&hwreq->queue); 1434 1435 usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir); 1436 1437 req->status = -ECONNRESET; 1438 1439 if (hwreq->req.complete != NULL) { 1440 spin_unlock(hwep->lock); 1441 usb_gadget_giveback_request(&hwep->ep, &hwreq->req); 1442 spin_lock(hwep->lock); 1443 } 1444 1445 spin_unlock_irqrestore(hwep->lock, flags); 1446 return 0; 1447 } 1448 1449 /** 1450 * ep_set_halt: sets the endpoint halt feature 1451 * 1452 * Check usb_ep_set_halt() at "usb_gadget.h" for details 1453 */ 1454 static int ep_set_halt(struct usb_ep *ep, int value) 1455 { 1456 return _ep_set_halt(ep, value, true); 1457 } 1458 1459 /** 1460 * ep_set_wedge: sets the halt feature and ignores clear requests 1461 * 1462 * Check usb_ep_set_wedge() at "usb_gadget.h" for details 1463 */ 1464 static int ep_set_wedge(struct usb_ep *ep) 1465 { 1466 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1467 unsigned long flags; 1468 1469 if (ep == NULL || hwep->ep.desc == NULL) 1470 return -EINVAL; 1471 1472 spin_lock_irqsave(hwep->lock, flags); 1473 hwep->wedge = 1; 1474 spin_unlock_irqrestore(hwep->lock, flags); 1475 1476 return usb_ep_set_halt(ep); 1477 } 1478 1479 /** 1480 * ep_fifo_flush: flushes contents of a fifo 1481 * 1482 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details 1483 */ 1484 static void ep_fifo_flush(struct usb_ep *ep) 1485 { 1486 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); 1487 unsigned long flags; 1488 1489 if (ep == NULL) { 1490 dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep)); 1491 return; 1492 } 1493 1494 spin_lock_irqsave(hwep->lock, flags); 1495 1496 hw_ep_flush(hwep->ci, hwep->num, hwep->dir); 1497 1498 spin_unlock_irqrestore(hwep->lock, flags); 1499 } 1500 1501 /** 1502 * Endpoint-specific part of the API to the USB controller hardware 1503 * Check "usb_gadget.h" for details 1504 */ 1505 static const struct usb_ep_ops usb_ep_ops = { 1506 .enable = ep_enable, 1507 .disable = ep_disable, 1508 .alloc_request = ep_alloc_request, 1509 .free_request = ep_free_request, 1510 .queue = ep_queue, 1511 .dequeue = ep_dequeue, 1512 .set_halt = ep_set_halt, 1513 .set_wedge = ep_set_wedge, 1514 .fifo_flush = ep_fifo_flush, 1515 }; 1516 1517 /****************************************************************************** 1518 * GADGET block 1519 *****************************************************************************/ 1520 static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) 1521 { 1522 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); 1523 unsigned long flags; 1524 int gadget_ready = 0; 1525 1526 spin_lock_irqsave(&ci->lock, flags); 1527 ci->vbus_active = is_active; 1528 if (ci->driver) 1529 gadget_ready = 1; 1530 spin_unlock_irqrestore(&ci->lock, flags); 1531 1532 if (gadget_ready) { 1533 if (is_active) { 1534 pm_runtime_get_sync(&_gadget->dev); 1535 hw_device_reset(ci); 1536 hw_device_state(ci, ci->ep0out->qh.dma); 1537 usb_gadget_set_state(_gadget, USB_STATE_POWERED); 1538 usb_udc_vbus_handler(_gadget, true); 1539 } else { 1540 usb_udc_vbus_handler(_gadget, false); 1541 if (ci->driver) 1542 ci->driver->disconnect(&ci->gadget); 1543 hw_device_state(ci, 0); 1544 if (ci->platdata->notify_event) 1545 ci->platdata->notify_event(ci, 1546 CI_HDRC_CONTROLLER_STOPPED_EVENT); 1547 _gadget_stop_activity(&ci->gadget); 1548 pm_runtime_put_sync(&_gadget->dev); 1549 usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED); 1550 } 1551 } 1552 1553 return 0; 1554 } 1555 1556 static int ci_udc_wakeup(struct usb_gadget *_gadget) 1557 { 1558 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); 1559 unsigned long flags; 1560 int ret = 0; 1561 1562 spin_lock_irqsave(&ci->lock, flags); 1563 if (!ci->remote_wakeup) { 1564 ret = -EOPNOTSUPP; 1565 goto out; 1566 } 1567 if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) { 1568 ret = -EINVAL; 1569 goto out; 1570 } 1571 hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); 1572 out: 1573 spin_unlock_irqrestore(&ci->lock, flags); 1574 return ret; 1575 } 1576 1577 static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma) 1578 { 1579 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); 1580 1581 if (ci->usb_phy) 1582 return usb_phy_set_power(ci->usb_phy, ma); 1583 return -ENOTSUPP; 1584 } 1585 1586 static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on) 1587 { 1588 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); 1589 struct ci_hw_ep *hwep = ci->ep0in; 1590 unsigned long flags; 1591 1592 spin_lock_irqsave(hwep->lock, flags); 1593 _gadget->is_selfpowered = (is_on != 0); 1594 spin_unlock_irqrestore(hwep->lock, flags); 1595 1596 return 0; 1597 } 1598 1599 /* Change Data+ pullup status 1600 * this func is used by usb_gadget_connect/disconnet 1601 */ 1602 static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) 1603 { 1604 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); 1605 1606 /* 1607 * Data+ pullup controlled by OTG state machine in OTG fsm mode; 1608 * and don't touch Data+ in host mode for dual role config. 1609 */ 1610 if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST) 1611 return 0; 1612 1613 pm_runtime_get_sync(&ci->gadget.dev); 1614 if (is_on) 1615 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); 1616 else 1617 hw_write(ci, OP_USBCMD, USBCMD_RS, 0); 1618 pm_runtime_put_sync(&ci->gadget.dev); 1619 1620 return 0; 1621 } 1622 1623 static int ci_udc_start(struct usb_gadget *gadget, 1624 struct usb_gadget_driver *driver); 1625 static int ci_udc_stop(struct usb_gadget *gadget); 1626 /** 1627 * Device operations part of the API to the USB controller hardware, 1628 * which don't involve endpoints (or i/o) 1629 * Check "usb_gadget.h" for details 1630 */ 1631 static const struct usb_gadget_ops usb_gadget_ops = { 1632 .vbus_session = ci_udc_vbus_session, 1633 .wakeup = ci_udc_wakeup, 1634 .set_selfpowered = ci_udc_selfpowered, 1635 .pullup = ci_udc_pullup, 1636 .vbus_draw = ci_udc_vbus_draw, 1637 .udc_start = ci_udc_start, 1638 .udc_stop = ci_udc_stop, 1639 }; 1640 1641 static int init_eps(struct ci_hdrc *ci) 1642 { 1643 int retval = 0, i, j; 1644 1645 for (i = 0; i < ci->hw_ep_max/2; i++) 1646 for (j = RX; j <= TX; j++) { 1647 int k = i + j * ci->hw_ep_max/2; 1648 struct ci_hw_ep *hwep = &ci->ci_hw_ep[k]; 1649 1650 scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i, 1651 (j == TX) ? "in" : "out"); 1652 1653 hwep->ci = ci; 1654 hwep->lock = &ci->lock; 1655 hwep->td_pool = ci->td_pool; 1656 1657 hwep->ep.name = hwep->name; 1658 hwep->ep.ops = &usb_ep_ops; 1659 1660 if (i == 0) { 1661 hwep->ep.caps.type_control = true; 1662 } else { 1663 hwep->ep.caps.type_iso = true; 1664 hwep->ep.caps.type_bulk = true; 1665 hwep->ep.caps.type_int = true; 1666 } 1667 1668 if (j == TX) 1669 hwep->ep.caps.dir_in = true; 1670 else 1671 hwep->ep.caps.dir_out = true; 1672 1673 /* 1674 * for ep0: maxP defined in desc, for other 1675 * eps, maxP is set by epautoconfig() called 1676 * by gadget layer 1677 */ 1678 usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0); 1679 1680 INIT_LIST_HEAD(&hwep->qh.queue); 1681 hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL, 1682 &hwep->qh.dma); 1683 if (hwep->qh.ptr == NULL) 1684 retval = -ENOMEM; 1685 1686 /* 1687 * set up shorthands for ep0 out and in endpoints, 1688 * don't add to gadget's ep_list 1689 */ 1690 if (i == 0) { 1691 if (j == RX) 1692 ci->ep0out = hwep; 1693 else 1694 ci->ep0in = hwep; 1695 1696 usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX); 1697 continue; 1698 } 1699 1700 list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list); 1701 } 1702 1703 return retval; 1704 } 1705 1706 static void destroy_eps(struct ci_hdrc *ci) 1707 { 1708 int i; 1709 1710 for (i = 0; i < ci->hw_ep_max; i++) { 1711 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; 1712 1713 if (hwep->pending_td) 1714 free_pending_td(hwep); 1715 dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma); 1716 } 1717 } 1718 1719 /** 1720 * ci_udc_start: register a gadget driver 1721 * @gadget: our gadget 1722 * @driver: the driver being registered 1723 * 1724 * Interrupts are enabled here. 1725 */ 1726 static int ci_udc_start(struct usb_gadget *gadget, 1727 struct usb_gadget_driver *driver) 1728 { 1729 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); 1730 int retval = -ENOMEM; 1731 1732 if (driver->disconnect == NULL) 1733 return -EINVAL; 1734 1735 1736 ci->ep0out->ep.desc = &ctrl_endpt_out_desc; 1737 retval = usb_ep_enable(&ci->ep0out->ep); 1738 if (retval) 1739 return retval; 1740 1741 ci->ep0in->ep.desc = &ctrl_endpt_in_desc; 1742 retval = usb_ep_enable(&ci->ep0in->ep); 1743 if (retval) 1744 return retval; 1745 1746 ci->driver = driver; 1747 1748 /* Start otg fsm for B-device */ 1749 if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) { 1750 ci_hdrc_otg_fsm_start(ci); 1751 return retval; 1752 } 1753 1754 pm_runtime_get_sync(&ci->gadget.dev); 1755 if (ci->vbus_active) { 1756 hw_device_reset(ci); 1757 } else { 1758 usb_udc_vbus_handler(&ci->gadget, false); 1759 pm_runtime_put_sync(&ci->gadget.dev); 1760 return retval; 1761 } 1762 1763 retval = hw_device_state(ci, ci->ep0out->qh.dma); 1764 if (retval) 1765 pm_runtime_put_sync(&ci->gadget.dev); 1766 1767 return retval; 1768 } 1769 1770 static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci) 1771 { 1772 if (!ci_otg_is_fsm_mode(ci)) 1773 return; 1774 1775 mutex_lock(&ci->fsm.lock); 1776 if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) { 1777 ci->fsm.a_bidl_adis_tmout = 1; 1778 ci_hdrc_otg_fsm_start(ci); 1779 } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) { 1780 ci->fsm.protocol = PROTO_UNDEF; 1781 ci->fsm.otg->state = OTG_STATE_UNDEFINED; 1782 } 1783 mutex_unlock(&ci->fsm.lock); 1784 } 1785 1786 /** 1787 * ci_udc_stop: unregister a gadget driver 1788 */ 1789 static int ci_udc_stop(struct usb_gadget *gadget) 1790 { 1791 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); 1792 unsigned long flags; 1793 1794 spin_lock_irqsave(&ci->lock, flags); 1795 1796 if (ci->vbus_active) { 1797 hw_device_state(ci, 0); 1798 spin_unlock_irqrestore(&ci->lock, flags); 1799 if (ci->platdata->notify_event) 1800 ci->platdata->notify_event(ci, 1801 CI_HDRC_CONTROLLER_STOPPED_EVENT); 1802 _gadget_stop_activity(&ci->gadget); 1803 spin_lock_irqsave(&ci->lock, flags); 1804 pm_runtime_put(&ci->gadget.dev); 1805 } 1806 1807 ci->driver = NULL; 1808 spin_unlock_irqrestore(&ci->lock, flags); 1809 1810 ci_udc_stop_for_otg_fsm(ci); 1811 return 0; 1812 } 1813 1814 /****************************************************************************** 1815 * BUS block 1816 *****************************************************************************/ 1817 /** 1818 * udc_irq: ci interrupt handler 1819 * 1820 * This function returns IRQ_HANDLED if the IRQ has been handled 1821 * It locks access to registers 1822 */ 1823 static irqreturn_t udc_irq(struct ci_hdrc *ci) 1824 { 1825 irqreturn_t retval; 1826 u32 intr; 1827 1828 if (ci == NULL) 1829 return IRQ_HANDLED; 1830 1831 spin_lock(&ci->lock); 1832 1833 if (ci->platdata->flags & CI_HDRC_REGS_SHARED) { 1834 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != 1835 USBMODE_CM_DC) { 1836 spin_unlock(&ci->lock); 1837 return IRQ_NONE; 1838 } 1839 } 1840 intr = hw_test_and_clear_intr_active(ci); 1841 1842 if (intr) { 1843 /* order defines priority - do NOT change it */ 1844 if (USBi_URI & intr) 1845 isr_reset_handler(ci); 1846 1847 if (USBi_PCI & intr) { 1848 ci->gadget.speed = hw_port_is_high_speed(ci) ? 1849 USB_SPEED_HIGH : USB_SPEED_FULL; 1850 if (ci->suspended) { 1851 if (ci->driver->resume) { 1852 spin_unlock(&ci->lock); 1853 ci->driver->resume(&ci->gadget); 1854 spin_lock(&ci->lock); 1855 } 1856 ci->suspended = 0; 1857 usb_gadget_set_state(&ci->gadget, 1858 ci->resume_state); 1859 } 1860 } 1861 1862 if (USBi_UI & intr) 1863 isr_tr_complete_handler(ci); 1864 1865 if ((USBi_SLI & intr) && !(ci->suspended)) { 1866 ci->suspended = 1; 1867 ci->resume_state = ci->gadget.state; 1868 if (ci->gadget.speed != USB_SPEED_UNKNOWN && 1869 ci->driver->suspend) { 1870 spin_unlock(&ci->lock); 1871 ci->driver->suspend(&ci->gadget); 1872 spin_lock(&ci->lock); 1873 } 1874 usb_gadget_set_state(&ci->gadget, 1875 USB_STATE_SUSPENDED); 1876 } 1877 retval = IRQ_HANDLED; 1878 } else { 1879 retval = IRQ_NONE; 1880 } 1881 spin_unlock(&ci->lock); 1882 1883 return retval; 1884 } 1885 1886 /** 1887 * udc_start: initialize gadget role 1888 * @ci: chipidea controller 1889 */ 1890 static int udc_start(struct ci_hdrc *ci) 1891 { 1892 struct device *dev = ci->dev; 1893 struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; 1894 int retval = 0; 1895 1896 ci->gadget.ops = &usb_gadget_ops; 1897 ci->gadget.speed = USB_SPEED_UNKNOWN; 1898 ci->gadget.max_speed = USB_SPEED_HIGH; 1899 ci->gadget.name = ci->platdata->name; 1900 ci->gadget.otg_caps = otg_caps; 1901 1902 if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support || 1903 otg_caps->adp_support)) 1904 ci->gadget.is_otg = 1; 1905 1906 INIT_LIST_HEAD(&ci->gadget.ep_list); 1907 1908 /* alloc resources */ 1909 ci->qh_pool = dma_pool_create("ci_hw_qh", dev->parent, 1910 sizeof(struct ci_hw_qh), 1911 64, CI_HDRC_PAGE_SIZE); 1912 if (ci->qh_pool == NULL) 1913 return -ENOMEM; 1914 1915 ci->td_pool = dma_pool_create("ci_hw_td", dev->parent, 1916 sizeof(struct ci_hw_td), 1917 64, CI_HDRC_PAGE_SIZE); 1918 if (ci->td_pool == NULL) { 1919 retval = -ENOMEM; 1920 goto free_qh_pool; 1921 } 1922 1923 retval = init_eps(ci); 1924 if (retval) 1925 goto free_pools; 1926 1927 ci->gadget.ep0 = &ci->ep0in->ep; 1928 1929 retval = usb_add_gadget_udc(dev, &ci->gadget); 1930 if (retval) 1931 goto destroy_eps; 1932 1933 pm_runtime_no_callbacks(&ci->gadget.dev); 1934 pm_runtime_enable(&ci->gadget.dev); 1935 1936 return retval; 1937 1938 destroy_eps: 1939 destroy_eps(ci); 1940 free_pools: 1941 dma_pool_destroy(ci->td_pool); 1942 free_qh_pool: 1943 dma_pool_destroy(ci->qh_pool); 1944 return retval; 1945 } 1946 1947 /** 1948 * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC 1949 * 1950 * No interrupts active, the IRQ has been released 1951 */ 1952 void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) 1953 { 1954 if (!ci->roles[CI_ROLE_GADGET]) 1955 return; 1956 1957 usb_del_gadget_udc(&ci->gadget); 1958 1959 destroy_eps(ci); 1960 1961 dma_pool_destroy(ci->td_pool); 1962 dma_pool_destroy(ci->qh_pool); 1963 } 1964 1965 static int udc_id_switch_for_device(struct ci_hdrc *ci) 1966 { 1967 if (ci->is_otg) 1968 /* Clear and enable BSV irq */ 1969 hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, 1970 OTGSC_BSVIS | OTGSC_BSVIE); 1971 1972 return 0; 1973 } 1974 1975 static void udc_id_switch_for_host(struct ci_hdrc *ci) 1976 { 1977 /* 1978 * host doesn't care B_SESSION_VALID event 1979 * so clear and disbale BSV irq 1980 */ 1981 if (ci->is_otg) 1982 hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); 1983 1984 ci->vbus_active = 0; 1985 } 1986 1987 /** 1988 * ci_hdrc_gadget_init - initialize device related bits 1989 * ci: the controller 1990 * 1991 * This function initializes the gadget, if the device is "device capable". 1992 */ 1993 int ci_hdrc_gadget_init(struct ci_hdrc *ci) 1994 { 1995 struct ci_role_driver *rdrv; 1996 1997 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) 1998 return -ENXIO; 1999 2000 rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL); 2001 if (!rdrv) 2002 return -ENOMEM; 2003 2004 rdrv->start = udc_id_switch_for_device; 2005 rdrv->stop = udc_id_switch_for_host; 2006 rdrv->irq = udc_irq; 2007 rdrv->name = "gadget"; 2008 ci->roles[CI_ROLE_GADGET] = rdrv; 2009 2010 return udc_start(ci); 2011 } 2012