xref: /openbmc/linux/drivers/usb/chipidea/host.c (revision ba61bb17)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * host.c - ChipIdea USB host controller driver
4  *
5  * Copyright (c) 2012 Intel Corporation
6  *
7  * Author: Alexander Shishkin
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/io.h>
12 #include <linux/usb.h>
13 #include <linux/usb/hcd.h>
14 #include <linux/usb/chipidea.h>
15 #include <linux/regulator/consumer.h>
16 
17 #include "../host/ehci.h"
18 
19 #include "ci.h"
20 #include "bits.h"
21 #include "host.h"
22 
23 static struct hc_driver __read_mostly ci_ehci_hc_driver;
24 static int (*orig_bus_suspend)(struct usb_hcd *hcd);
25 
26 struct ehci_ci_priv {
27 	struct regulator *reg_vbus;
28 };
29 
30 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
31 {
32 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
33 	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
34 	struct device *dev = hcd->self.controller;
35 	struct ci_hdrc *ci = dev_get_drvdata(dev);
36 	int ret = 0;
37 	int port = HCS_N_PORTS(ehci->hcs_params);
38 
39 	if (priv->reg_vbus) {
40 		if (port > 1) {
41 			dev_warn(dev,
42 				"Not support multi-port regulator control\n");
43 			return 0;
44 		}
45 		if (enable)
46 			ret = regulator_enable(priv->reg_vbus);
47 		else
48 			ret = regulator_disable(priv->reg_vbus);
49 		if (ret) {
50 			dev_err(dev,
51 				"Failed to %s vbus regulator, ret=%d\n",
52 				enable ? "enable" : "disable", ret);
53 			return ret;
54 		}
55 	}
56 
57 	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
58 		/*
59 		 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
60 		 * As HSIC is always HS, this should be safe for others.
61 		 */
62 		hw_port_test_set(ci, 5);
63 		hw_port_test_set(ci, 0);
64 	}
65 	return 0;
66 };
67 
68 static int ehci_ci_reset(struct usb_hcd *hcd)
69 {
70 	struct device *dev = hcd->self.controller;
71 	struct ci_hdrc *ci = dev_get_drvdata(dev);
72 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
73 	int ret;
74 
75 	ret = ehci_setup(hcd);
76 	if (ret)
77 		return ret;
78 
79 	ehci->need_io_watchdog = 0;
80 
81 	if (ci->platdata->notify_event) {
82 		ret = ci->platdata->notify_event(ci,
83 				CI_HDRC_CONTROLLER_RESET_EVENT);
84 		if (ret)
85 			return ret;
86 	}
87 
88 	ci_platform_configure(ci);
89 
90 	return ret;
91 }
92 
93 static const struct ehci_driver_overrides ehci_ci_overrides = {
94 	.extra_priv_size = sizeof(struct ehci_ci_priv),
95 	.port_power	 = ehci_ci_portpower,
96 	.reset		 = ehci_ci_reset,
97 };
98 
99 static irqreturn_t host_irq(struct ci_hdrc *ci)
100 {
101 	return usb_hcd_irq(ci->irq, ci->hcd);
102 }
103 
104 static int host_start(struct ci_hdrc *ci)
105 {
106 	struct usb_hcd *hcd;
107 	struct ehci_hcd *ehci;
108 	struct ehci_ci_priv *priv;
109 	int ret;
110 
111 	if (usb_disabled())
112 		return -ENODEV;
113 
114 	hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent,
115 			       ci->dev, dev_name(ci->dev), NULL);
116 	if (!hcd)
117 		return -ENOMEM;
118 
119 	dev_set_drvdata(ci->dev, ci);
120 	hcd->rsrc_start = ci->hw_bank.phys;
121 	hcd->rsrc_len = ci->hw_bank.size;
122 	hcd->regs = ci->hw_bank.abs;
123 	hcd->has_tt = 1;
124 
125 	hcd->power_budget = ci->platdata->power_budget;
126 	hcd->tpl_support = ci->platdata->tpl_support;
127 	if (ci->phy || ci->usb_phy) {
128 		hcd->skip_phy_initialization = 1;
129 		if (ci->usb_phy)
130 			hcd->usb_phy = ci->usb_phy;
131 	}
132 
133 	ehci = hcd_to_ehci(hcd);
134 	ehci->caps = ci->hw_bank.cap;
135 	ehci->has_hostpc = ci->hw_bank.lpm;
136 	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
137 	ehci->imx28_write_fix = ci->imx28_write_fix;
138 
139 	priv = (struct ehci_ci_priv *)ehci->priv;
140 	priv->reg_vbus = NULL;
141 
142 	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
143 		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
144 			ret = regulator_enable(ci->platdata->reg_vbus);
145 			if (ret) {
146 				dev_err(ci->dev,
147 				"Failed to enable vbus regulator, ret=%d\n",
148 									ret);
149 				goto put_hcd;
150 			}
151 		} else {
152 			priv->reg_vbus = ci->platdata->reg_vbus;
153 		}
154 	}
155 
156 	ret = usb_add_hcd(hcd, 0, 0);
157 	if (ret) {
158 		goto disable_reg;
159 	} else {
160 		struct usb_otg *otg = &ci->otg;
161 
162 		ci->hcd = hcd;
163 
164 		if (ci_otg_is_fsm_mode(ci)) {
165 			otg->host = &hcd->self;
166 			hcd->self.otg_port = 1;
167 		}
168 	}
169 
170 	return ret;
171 
172 disable_reg:
173 	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
174 			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
175 		regulator_disable(ci->platdata->reg_vbus);
176 put_hcd:
177 	usb_put_hcd(hcd);
178 
179 	return ret;
180 }
181 
182 static void host_stop(struct ci_hdrc *ci)
183 {
184 	struct usb_hcd *hcd = ci->hcd;
185 
186 	if (hcd) {
187 		if (ci->platdata->notify_event)
188 			ci->platdata->notify_event(ci,
189 				CI_HDRC_CONTROLLER_STOPPED_EVENT);
190 		usb_remove_hcd(hcd);
191 		ci->role = CI_ROLE_END;
192 		synchronize_irq(ci->irq);
193 		usb_put_hcd(hcd);
194 		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
195 			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
196 				regulator_disable(ci->platdata->reg_vbus);
197 	}
198 	ci->hcd = NULL;
199 	ci->otg.host = NULL;
200 }
201 
202 
203 void ci_hdrc_host_destroy(struct ci_hdrc *ci)
204 {
205 	if (ci->role == CI_ROLE_HOST && ci->hcd)
206 		host_stop(ci);
207 }
208 
209 static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
210 {
211 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
212 	int port;
213 	u32 tmp;
214 
215 	int ret = orig_bus_suspend(hcd);
216 
217 	if (ret)
218 		return ret;
219 
220 	port = HCS_N_PORTS(ehci->hcs_params);
221 	while (port--) {
222 		u32 __iomem *reg = &ehci->regs->port_status[port];
223 		u32 portsc = ehci_readl(ehci, reg);
224 
225 		if (portsc & PORT_CONNECT) {
226 			/*
227 			 * For chipidea, the resume signal will be ended
228 			 * automatically, so for remote wakeup case, the
229 			 * usbcmd.rs may not be set before the resume has
230 			 * ended if other resume paths consumes too much
231 			 * time (~24ms), in that case, the SOF will not
232 			 * send out within 3ms after resume ends, then the
233 			 * high speed device will enter full speed mode.
234 			 */
235 
236 			tmp = ehci_readl(ehci, &ehci->regs->command);
237 			tmp |= CMD_RUN;
238 			ehci_writel(ehci, tmp, &ehci->regs->command);
239 			/*
240 			 * It needs a short delay between set RS bit and PHCD.
241 			 */
242 			usleep_range(150, 200);
243 			break;
244 		}
245 	}
246 
247 	return 0;
248 }
249 
250 int ci_hdrc_host_init(struct ci_hdrc *ci)
251 {
252 	struct ci_role_driver *rdrv;
253 
254 	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
255 		return -ENXIO;
256 
257 	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
258 	if (!rdrv)
259 		return -ENOMEM;
260 
261 	rdrv->start	= host_start;
262 	rdrv->stop	= host_stop;
263 	rdrv->irq	= host_irq;
264 	rdrv->name	= "host";
265 	ci->roles[CI_ROLE_HOST] = rdrv;
266 
267 	return 0;
268 }
269 
270 void ci_hdrc_host_driver_init(void)
271 {
272 	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
273 	orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
274 	ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
275 }
276