xref: /openbmc/linux/drivers/usb/chipidea/host.c (revision 9cfc5c90)
1 /*
2  * host.c - ChipIdea USB host controller driver
3  *
4  * Copyright (c) 2012 Intel Corporation
5  *
6  * Author: Alexander Shishkin
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21 
22 #include <linux/kernel.h>
23 #include <linux/io.h>
24 #include <linux/usb.h>
25 #include <linux/usb/hcd.h>
26 #include <linux/usb/chipidea.h>
27 #include <linux/regulator/consumer.h>
28 
29 #include "../host/ehci.h"
30 
31 #include "ci.h"
32 #include "bits.h"
33 #include "host.h"
34 
35 static struct hc_driver __read_mostly ci_ehci_hc_driver;
36 static int (*orig_bus_suspend)(struct usb_hcd *hcd);
37 
38 struct ehci_ci_priv {
39 	struct regulator *reg_vbus;
40 };
41 
42 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
43 {
44 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
45 	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
46 	struct device *dev = hcd->self.controller;
47 	struct ci_hdrc *ci = dev_get_drvdata(dev);
48 	int ret = 0;
49 	int port = HCS_N_PORTS(ehci->hcs_params);
50 
51 	if (priv->reg_vbus) {
52 		if (port > 1) {
53 			dev_warn(dev,
54 				"Not support multi-port regulator control\n");
55 			return 0;
56 		}
57 		if (enable)
58 			ret = regulator_enable(priv->reg_vbus);
59 		else
60 			ret = regulator_disable(priv->reg_vbus);
61 		if (ret) {
62 			dev_err(dev,
63 				"Failed to %s vbus regulator, ret=%d\n",
64 				enable ? "enable" : "disable", ret);
65 			return ret;
66 		}
67 	}
68 
69 	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
70 		/*
71 		 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
72 		 * As HSIC is always HS, this should be safe for others.
73 		 */
74 		hw_port_test_set(ci, 5);
75 		hw_port_test_set(ci, 0);
76 	}
77 	return 0;
78 };
79 
80 static int ehci_ci_reset(struct usb_hcd *hcd)
81 {
82 	struct device *dev = hcd->self.controller;
83 	struct ci_hdrc *ci = dev_get_drvdata(dev);
84 	int ret;
85 
86 	ret = ehci_setup(hcd);
87 	if (ret)
88 		return ret;
89 
90 	ci_platform_configure(ci);
91 
92 	return ret;
93 }
94 
95 static const struct ehci_driver_overrides ehci_ci_overrides = {
96 	.extra_priv_size = sizeof(struct ehci_ci_priv),
97 	.port_power	 = ehci_ci_portpower,
98 	.reset		 = ehci_ci_reset,
99 };
100 
101 static irqreturn_t host_irq(struct ci_hdrc *ci)
102 {
103 	return usb_hcd_irq(ci->irq, ci->hcd);
104 }
105 
106 static int host_start(struct ci_hdrc *ci)
107 {
108 	struct usb_hcd *hcd;
109 	struct ehci_hcd *ehci;
110 	struct ehci_ci_priv *priv;
111 	int ret;
112 
113 	if (usb_disabled())
114 		return -ENODEV;
115 
116 	hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
117 	if (!hcd)
118 		return -ENOMEM;
119 
120 	dev_set_drvdata(ci->dev, ci);
121 	hcd->rsrc_start = ci->hw_bank.phys;
122 	hcd->rsrc_len = ci->hw_bank.size;
123 	hcd->regs = ci->hw_bank.abs;
124 	hcd->has_tt = 1;
125 
126 	hcd->power_budget = ci->platdata->power_budget;
127 	hcd->tpl_support = ci->platdata->tpl_support;
128 	if (ci->phy)
129 		hcd->phy = ci->phy;
130 	else
131 		hcd->usb_phy = ci->usb_phy;
132 
133 	ehci = hcd_to_ehci(hcd);
134 	ehci->caps = ci->hw_bank.cap;
135 	ehci->has_hostpc = ci->hw_bank.lpm;
136 	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
137 	ehci->imx28_write_fix = ci->imx28_write_fix;
138 
139 	priv = (struct ehci_ci_priv *)ehci->priv;
140 	priv->reg_vbus = NULL;
141 
142 	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
143 		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
144 			ret = regulator_enable(ci->platdata->reg_vbus);
145 			if (ret) {
146 				dev_err(ci->dev,
147 				"Failed to enable vbus regulator, ret=%d\n",
148 									ret);
149 				goto put_hcd;
150 			}
151 		} else {
152 			priv->reg_vbus = ci->platdata->reg_vbus;
153 		}
154 	}
155 
156 	ret = usb_add_hcd(hcd, 0, 0);
157 	if (ret) {
158 		goto disable_reg;
159 	} else {
160 		struct usb_otg *otg = &ci->otg;
161 
162 		ci->hcd = hcd;
163 
164 		if (ci_otg_is_fsm_mode(ci)) {
165 			otg->host = &hcd->self;
166 			hcd->self.otg_port = 1;
167 		}
168 	}
169 
170 	return ret;
171 
172 disable_reg:
173 	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
174 			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
175 		regulator_disable(ci->platdata->reg_vbus);
176 put_hcd:
177 	usb_put_hcd(hcd);
178 
179 	return ret;
180 }
181 
182 static void host_stop(struct ci_hdrc *ci)
183 {
184 	struct usb_hcd *hcd = ci->hcd;
185 
186 	if (hcd) {
187 		usb_remove_hcd(hcd);
188 		usb_put_hcd(hcd);
189 		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
190 			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
191 				regulator_disable(ci->platdata->reg_vbus);
192 	}
193 }
194 
195 
196 void ci_hdrc_host_destroy(struct ci_hdrc *ci)
197 {
198 	if (ci->role == CI_ROLE_HOST && ci->hcd)
199 		host_stop(ci);
200 }
201 
202 static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
203 {
204 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
205 	int port;
206 	u32 tmp;
207 
208 	int ret = orig_bus_suspend(hcd);
209 
210 	if (ret)
211 		return ret;
212 
213 	port = HCS_N_PORTS(ehci->hcs_params);
214 	while (port--) {
215 		u32 __iomem *reg = &ehci->regs->port_status[port];
216 		u32 portsc = ehci_readl(ehci, reg);
217 
218 		if (portsc & PORT_CONNECT) {
219 			/*
220 			 * For chipidea, the resume signal will be ended
221 			 * automatically, so for remote wakeup case, the
222 			 * usbcmd.rs may not be set before the resume has
223 			 * ended if other resume paths consumes too much
224 			 * time (~24ms), in that case, the SOF will not
225 			 * send out within 3ms after resume ends, then the
226 			 * high speed device will enter full speed mode.
227 			 */
228 
229 			tmp = ehci_readl(ehci, &ehci->regs->command);
230 			tmp |= CMD_RUN;
231 			ehci_writel(ehci, tmp, &ehci->regs->command);
232 			/*
233 			 * It needs a short delay between set RS bit and PHCD.
234 			 */
235 			usleep_range(150, 200);
236 			break;
237 		}
238 	}
239 
240 	return 0;
241 }
242 
243 int ci_hdrc_host_init(struct ci_hdrc *ci)
244 {
245 	struct ci_role_driver *rdrv;
246 
247 	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
248 		return -ENXIO;
249 
250 	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
251 	if (!rdrv)
252 		return -ENOMEM;
253 
254 	rdrv->start	= host_start;
255 	rdrv->stop	= host_stop;
256 	rdrv->irq	= host_irq;
257 	rdrv->name	= "host";
258 	ci->roles[CI_ROLE_HOST] = rdrv;
259 
260 	return 0;
261 }
262 
263 void ci_hdrc_host_driver_init(void)
264 {
265 	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
266 	orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
267 	ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
268 }
269