1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * core.c - ChipIdea USB IP core family device controller 4 * 5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. 6 * Copyright (C) 2020 NXP 7 * 8 * Author: David Lopo 9 * Peter Chen <peter.chen@nxp.com> 10 * 11 * Main Features: 12 * - Four transfers are supported, usbtest is passed 13 * - USB Certification for gadget: CH9 and Mass Storage are passed 14 * - Low power mode 15 * - USB wakeup 16 */ 17 #include <linux/delay.h> 18 #include <linux/device.h> 19 #include <linux/dma-mapping.h> 20 #include <linux/extcon.h> 21 #include <linux/phy/phy.h> 22 #include <linux/platform_device.h> 23 #include <linux/module.h> 24 #include <linux/idr.h> 25 #include <linux/interrupt.h> 26 #include <linux/io.h> 27 #include <linux/kernel.h> 28 #include <linux/slab.h> 29 #include <linux/pm_runtime.h> 30 #include <linux/pinctrl/consumer.h> 31 #include <linux/usb/ch9.h> 32 #include <linux/usb/gadget.h> 33 #include <linux/usb/otg.h> 34 #include <linux/usb/chipidea.h> 35 #include <linux/usb/of.h> 36 #include <linux/of.h> 37 #include <linux/regulator/consumer.h> 38 #include <linux/usb/ehci_def.h> 39 40 #include "ci.h" 41 #include "udc.h" 42 #include "bits.h" 43 #include "host.h" 44 #include "otg.h" 45 #include "otg_fsm.h" 46 47 /* Controller register map */ 48 static const u8 ci_regs_nolpm[] = { 49 [CAP_CAPLENGTH] = 0x00U, 50 [CAP_HCCPARAMS] = 0x08U, 51 [CAP_DCCPARAMS] = 0x24U, 52 [CAP_TESTMODE] = 0x38U, 53 [OP_USBCMD] = 0x00U, 54 [OP_USBSTS] = 0x04U, 55 [OP_USBINTR] = 0x08U, 56 [OP_DEVICEADDR] = 0x14U, 57 [OP_ENDPTLISTADDR] = 0x18U, 58 [OP_TTCTRL] = 0x1CU, 59 [OP_BURSTSIZE] = 0x20U, 60 [OP_ULPI_VIEWPORT] = 0x30U, 61 [OP_PORTSC] = 0x44U, 62 [OP_DEVLC] = 0x84U, 63 [OP_OTGSC] = 0x64U, 64 [OP_USBMODE] = 0x68U, 65 [OP_ENDPTSETUPSTAT] = 0x6CU, 66 [OP_ENDPTPRIME] = 0x70U, 67 [OP_ENDPTFLUSH] = 0x74U, 68 [OP_ENDPTSTAT] = 0x78U, 69 [OP_ENDPTCOMPLETE] = 0x7CU, 70 [OP_ENDPTCTRL] = 0x80U, 71 }; 72 73 static const u8 ci_regs_lpm[] = { 74 [CAP_CAPLENGTH] = 0x00U, 75 [CAP_HCCPARAMS] = 0x08U, 76 [CAP_DCCPARAMS] = 0x24U, 77 [CAP_TESTMODE] = 0xFCU, 78 [OP_USBCMD] = 0x00U, 79 [OP_USBSTS] = 0x04U, 80 [OP_USBINTR] = 0x08U, 81 [OP_DEVICEADDR] = 0x14U, 82 [OP_ENDPTLISTADDR] = 0x18U, 83 [OP_TTCTRL] = 0x1CU, 84 [OP_BURSTSIZE] = 0x20U, 85 [OP_ULPI_VIEWPORT] = 0x30U, 86 [OP_PORTSC] = 0x44U, 87 [OP_DEVLC] = 0x84U, 88 [OP_OTGSC] = 0xC4U, 89 [OP_USBMODE] = 0xC8U, 90 [OP_ENDPTSETUPSTAT] = 0xD8U, 91 [OP_ENDPTPRIME] = 0xDCU, 92 [OP_ENDPTFLUSH] = 0xE0U, 93 [OP_ENDPTSTAT] = 0xE4U, 94 [OP_ENDPTCOMPLETE] = 0xE8U, 95 [OP_ENDPTCTRL] = 0xECU, 96 }; 97 98 static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) 99 { 100 int i; 101 102 for (i = 0; i < OP_ENDPTCTRL; i++) 103 ci->hw_bank.regmap[i] = 104 (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + 105 (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); 106 107 for (; i <= OP_LAST; i++) 108 ci->hw_bank.regmap[i] = ci->hw_bank.op + 109 4 * (i - OP_ENDPTCTRL) + 110 (is_lpm 111 ? ci_regs_lpm[OP_ENDPTCTRL] 112 : ci_regs_nolpm[OP_ENDPTCTRL]); 113 114 } 115 116 static enum ci_revision ci_get_revision(struct ci_hdrc *ci) 117 { 118 int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION); 119 enum ci_revision rev = CI_REVISION_UNKNOWN; 120 121 if (ver == 0x2) { 122 rev = hw_read_id_reg(ci, ID_ID, REVISION) 123 >> __ffs(REVISION); 124 rev += CI_REVISION_20; 125 } else if (ver == 0x0) { 126 rev = CI_REVISION_1X; 127 } 128 129 return rev; 130 } 131 132 /** 133 * hw_read_intr_enable: returns interrupt enable register 134 * 135 * @ci: the controller 136 * 137 * This function returns register data 138 */ 139 u32 hw_read_intr_enable(struct ci_hdrc *ci) 140 { 141 return hw_read(ci, OP_USBINTR, ~0); 142 } 143 144 /** 145 * hw_read_intr_status: returns interrupt status register 146 * 147 * @ci: the controller 148 * 149 * This function returns register data 150 */ 151 u32 hw_read_intr_status(struct ci_hdrc *ci) 152 { 153 return hw_read(ci, OP_USBSTS, ~0); 154 } 155 156 /** 157 * hw_port_test_set: writes port test mode (execute without interruption) 158 * @mode: new value 159 * 160 * This function returns an error code 161 */ 162 int hw_port_test_set(struct ci_hdrc *ci, u8 mode) 163 { 164 const u8 TEST_MODE_MAX = 7; 165 166 if (mode > TEST_MODE_MAX) 167 return -EINVAL; 168 169 hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); 170 return 0; 171 } 172 173 /** 174 * hw_port_test_get: reads port test mode value 175 * 176 * @ci: the controller 177 * 178 * This function returns port test mode value 179 */ 180 u8 hw_port_test_get(struct ci_hdrc *ci) 181 { 182 return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); 183 } 184 185 static void hw_wait_phy_stable(void) 186 { 187 /* 188 * The phy needs some delay to output the stable status from low 189 * power mode. And for OTGSC, the status inputs are debounced 190 * using a 1 ms time constant, so, delay 2ms for controller to get 191 * the stable status, like vbus and id when the phy leaves low power. 192 */ 193 usleep_range(2000, 2500); 194 } 195 196 /* The PHY enters/leaves low power mode */ 197 static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) 198 { 199 enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC; 200 bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm))); 201 202 if (enable && !lpm) 203 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), 204 PORTSC_PHCD(ci->hw_bank.lpm)); 205 else if (!enable && lpm) 206 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), 207 0); 208 } 209 210 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) 211 { 212 u32 reg; 213 214 /* bank is a module variable */ 215 ci->hw_bank.abs = base; 216 217 ci->hw_bank.cap = ci->hw_bank.abs; 218 ci->hw_bank.cap += ci->platdata->capoffset; 219 ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); 220 221 hw_alloc_regmap(ci, false); 222 reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> 223 __ffs(HCCPARAMS_LEN); 224 ci->hw_bank.lpm = reg; 225 if (reg) 226 hw_alloc_regmap(ci, !!reg); 227 ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; 228 ci->hw_bank.size += OP_LAST; 229 ci->hw_bank.size /= sizeof(u32); 230 231 reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> 232 __ffs(DCCPARAMS_DEN); 233 ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ 234 235 if (ci->hw_ep_max > ENDPT_MAX) 236 return -ENODEV; 237 238 ci_hdrc_enter_lpm(ci, false); 239 240 /* Disable all interrupts bits */ 241 hw_write(ci, OP_USBINTR, 0xffffffff, 0); 242 243 /* Clear all interrupts status bits*/ 244 hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); 245 246 ci->rev = ci_get_revision(ci); 247 248 dev_dbg(ci->dev, 249 "revision: %d, lpm: %d; cap: %px op: %px\n", 250 ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); 251 252 /* setup lock mode ? */ 253 254 /* ENDPTSETUPSTAT is '0' by default */ 255 256 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ 257 258 return 0; 259 } 260 261 void hw_phymode_configure(struct ci_hdrc *ci) 262 { 263 u32 portsc, lpm, sts = 0; 264 265 switch (ci->platdata->phy_mode) { 266 case USBPHY_INTERFACE_MODE_UTMI: 267 portsc = PORTSC_PTS(PTS_UTMI); 268 lpm = DEVLC_PTS(PTS_UTMI); 269 break; 270 case USBPHY_INTERFACE_MODE_UTMIW: 271 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; 272 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; 273 break; 274 case USBPHY_INTERFACE_MODE_ULPI: 275 portsc = PORTSC_PTS(PTS_ULPI); 276 lpm = DEVLC_PTS(PTS_ULPI); 277 break; 278 case USBPHY_INTERFACE_MODE_SERIAL: 279 portsc = PORTSC_PTS(PTS_SERIAL); 280 lpm = DEVLC_PTS(PTS_SERIAL); 281 sts = 1; 282 break; 283 case USBPHY_INTERFACE_MODE_HSIC: 284 portsc = PORTSC_PTS(PTS_HSIC); 285 lpm = DEVLC_PTS(PTS_HSIC); 286 break; 287 default: 288 return; 289 } 290 291 if (ci->hw_bank.lpm) { 292 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); 293 if (sts) 294 hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS); 295 } else { 296 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); 297 if (sts) 298 hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS); 299 } 300 } 301 EXPORT_SYMBOL_GPL(hw_phymode_configure); 302 303 /** 304 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy 305 * interfaces 306 * @ci: the controller 307 * 308 * This function returns an error code if the phy failed to init 309 */ 310 static int _ci_usb_phy_init(struct ci_hdrc *ci) 311 { 312 int ret; 313 314 if (ci->phy) { 315 ret = phy_init(ci->phy); 316 if (ret) 317 return ret; 318 319 ret = phy_power_on(ci->phy); 320 if (ret) { 321 phy_exit(ci->phy); 322 return ret; 323 } 324 } else { 325 ret = usb_phy_init(ci->usb_phy); 326 } 327 328 return ret; 329 } 330 331 /** 332 * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy 333 * interfaces 334 * @ci: the controller 335 */ 336 static void ci_usb_phy_exit(struct ci_hdrc *ci) 337 { 338 if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL) 339 return; 340 341 if (ci->phy) { 342 phy_power_off(ci->phy); 343 phy_exit(ci->phy); 344 } else { 345 usb_phy_shutdown(ci->usb_phy); 346 } 347 } 348 349 /** 350 * ci_usb_phy_init: initialize phy according to different phy type 351 * @ci: the controller 352 * 353 * This function returns an error code if usb_phy_init has failed 354 */ 355 static int ci_usb_phy_init(struct ci_hdrc *ci) 356 { 357 int ret; 358 359 if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL) 360 return 0; 361 362 switch (ci->platdata->phy_mode) { 363 case USBPHY_INTERFACE_MODE_UTMI: 364 case USBPHY_INTERFACE_MODE_UTMIW: 365 case USBPHY_INTERFACE_MODE_HSIC: 366 ret = _ci_usb_phy_init(ci); 367 if (!ret) 368 hw_wait_phy_stable(); 369 else 370 return ret; 371 hw_phymode_configure(ci); 372 break; 373 case USBPHY_INTERFACE_MODE_ULPI: 374 case USBPHY_INTERFACE_MODE_SERIAL: 375 hw_phymode_configure(ci); 376 ret = _ci_usb_phy_init(ci); 377 if (ret) 378 return ret; 379 break; 380 default: 381 ret = _ci_usb_phy_init(ci); 382 if (!ret) 383 hw_wait_phy_stable(); 384 } 385 386 return ret; 387 } 388 389 390 /** 391 * ci_platform_configure: do controller configure 392 * @ci: the controller 393 * 394 */ 395 void ci_platform_configure(struct ci_hdrc *ci) 396 { 397 bool is_device_mode, is_host_mode; 398 399 is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC; 400 is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC; 401 402 if (is_device_mode) { 403 phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE); 404 405 if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING) 406 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, 407 USBMODE_CI_SDIS); 408 } 409 410 if (is_host_mode) { 411 phy_set_mode(ci->phy, PHY_MODE_USB_HOST); 412 413 if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING) 414 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, 415 USBMODE_CI_SDIS); 416 } 417 418 if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { 419 if (ci->hw_bank.lpm) 420 hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC); 421 else 422 hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); 423 } 424 425 if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA) 426 hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA); 427 428 hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16); 429 430 if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST) 431 hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK, 432 ci->platdata->ahb_burst_config); 433 434 /* override burst size, take effect only when ahb_burst_config is 0 */ 435 if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) { 436 if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST) 437 hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK, 438 ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK)); 439 440 if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST) 441 hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK, 442 ci->platdata->rx_burst_size); 443 } 444 } 445 446 /** 447 * hw_controller_reset: do controller reset 448 * @ci: the controller 449 * 450 * This function returns an error code 451 */ 452 static int hw_controller_reset(struct ci_hdrc *ci) 453 { 454 int count = 0; 455 456 hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); 457 while (hw_read(ci, OP_USBCMD, USBCMD_RST)) { 458 udelay(10); 459 if (count++ > 1000) 460 return -ETIMEDOUT; 461 } 462 463 return 0; 464 } 465 466 /** 467 * hw_device_reset: resets chip (execute without interruption) 468 * @ci: the controller 469 * 470 * This function returns an error code 471 */ 472 int hw_device_reset(struct ci_hdrc *ci) 473 { 474 int ret; 475 476 /* should flush & stop before reset */ 477 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); 478 hw_write(ci, OP_USBCMD, USBCMD_RS, 0); 479 480 ret = hw_controller_reset(ci); 481 if (ret) { 482 dev_err(ci->dev, "error resetting controller, ret=%d\n", ret); 483 return ret; 484 } 485 486 if (ci->platdata->notify_event) { 487 ret = ci->platdata->notify_event(ci, 488 CI_HDRC_CONTROLLER_RESET_EVENT); 489 if (ret) 490 return ret; 491 } 492 493 /* USBMODE should be configured step by step */ 494 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); 495 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC); 496 /* HW >= 2.3 */ 497 hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); 498 499 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { 500 dev_err(ci->dev, "cannot enter in %s device mode\n", 501 ci_role(ci)->name); 502 dev_err(ci->dev, "lpm = %i\n", ci->hw_bank.lpm); 503 return -ENODEV; 504 } 505 506 ci_platform_configure(ci); 507 508 return 0; 509 } 510 511 static irqreturn_t ci_irq(int irq, void *data) 512 { 513 struct ci_hdrc *ci = data; 514 irqreturn_t ret = IRQ_NONE; 515 u32 otgsc = 0; 516 517 if (ci->in_lpm) { 518 disable_irq_nosync(irq); 519 ci->wakeup_int = true; 520 pm_runtime_get(ci->dev); 521 return IRQ_HANDLED; 522 } 523 524 if (ci->is_otg) { 525 otgsc = hw_read_otgsc(ci, ~0); 526 if (ci_otg_is_fsm_mode(ci)) { 527 ret = ci_otg_fsm_irq(ci); 528 if (ret == IRQ_HANDLED) 529 return ret; 530 } 531 } 532 533 /* 534 * Handle id change interrupt, it indicates device/host function 535 * switch. 536 */ 537 if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { 538 ci->id_event = true; 539 /* Clear ID change irq status */ 540 hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); 541 ci_otg_queue_work(ci); 542 return IRQ_HANDLED; 543 } 544 545 /* 546 * Handle vbus change interrupt, it indicates device connection 547 * and disconnection events. 548 */ 549 if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { 550 ci->b_sess_valid_event = true; 551 /* Clear BSV irq */ 552 hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); 553 ci_otg_queue_work(ci); 554 return IRQ_HANDLED; 555 } 556 557 /* Handle device/host interrupt */ 558 if (ci->role != CI_ROLE_END) 559 ret = ci_role(ci)->irq(ci); 560 561 return ret; 562 } 563 564 static int ci_cable_notifier(struct notifier_block *nb, unsigned long event, 565 void *ptr) 566 { 567 struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb); 568 struct ci_hdrc *ci = cbl->ci; 569 570 cbl->connected = event; 571 cbl->changed = true; 572 573 ci_irq(ci->irq, ci); 574 return NOTIFY_DONE; 575 } 576 577 static enum usb_role ci_usb_role_switch_get(struct usb_role_switch *sw) 578 { 579 struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw); 580 enum usb_role role; 581 unsigned long flags; 582 583 spin_lock_irqsave(&ci->lock, flags); 584 role = ci_role_to_usb_role(ci); 585 spin_unlock_irqrestore(&ci->lock, flags); 586 587 return role; 588 } 589 590 static int ci_usb_role_switch_set(struct usb_role_switch *sw, 591 enum usb_role role) 592 { 593 struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw); 594 struct ci_hdrc_cable *cable = NULL; 595 enum usb_role current_role = ci_role_to_usb_role(ci); 596 enum ci_role ci_role = usb_role_to_ci_role(role); 597 unsigned long flags; 598 599 if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) || 600 (current_role == role)) 601 return 0; 602 603 pm_runtime_get_sync(ci->dev); 604 /* Stop current role */ 605 spin_lock_irqsave(&ci->lock, flags); 606 if (current_role == USB_ROLE_DEVICE) 607 cable = &ci->platdata->vbus_extcon; 608 else if (current_role == USB_ROLE_HOST) 609 cable = &ci->platdata->id_extcon; 610 611 if (cable) { 612 cable->changed = true; 613 cable->connected = false; 614 ci_irq(ci->irq, ci); 615 spin_unlock_irqrestore(&ci->lock, flags); 616 if (ci->wq && role != USB_ROLE_NONE) 617 flush_workqueue(ci->wq); 618 spin_lock_irqsave(&ci->lock, flags); 619 } 620 621 cable = NULL; 622 623 /* Start target role */ 624 if (role == USB_ROLE_DEVICE) 625 cable = &ci->platdata->vbus_extcon; 626 else if (role == USB_ROLE_HOST) 627 cable = &ci->platdata->id_extcon; 628 629 if (cable) { 630 cable->changed = true; 631 cable->connected = true; 632 ci_irq(ci->irq, ci); 633 } 634 spin_unlock_irqrestore(&ci->lock, flags); 635 pm_runtime_put_sync(ci->dev); 636 637 return 0; 638 } 639 640 static struct usb_role_switch_desc ci_role_switch = { 641 .set = ci_usb_role_switch_set, 642 .get = ci_usb_role_switch_get, 643 .allow_userspace_control = true, 644 }; 645 646 static int ci_get_platdata(struct device *dev, 647 struct ci_hdrc_platform_data *platdata) 648 { 649 struct extcon_dev *ext_vbus, *ext_id; 650 struct ci_hdrc_cable *cable; 651 int ret; 652 653 if (!platdata->phy_mode) 654 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); 655 656 if (!platdata->dr_mode) 657 platdata->dr_mode = usb_get_dr_mode(dev); 658 659 if (platdata->dr_mode == USB_DR_MODE_UNKNOWN) 660 platdata->dr_mode = USB_DR_MODE_OTG; 661 662 if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) { 663 /* Get the vbus regulator */ 664 platdata->reg_vbus = devm_regulator_get_optional(dev, "vbus"); 665 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { 666 return -EPROBE_DEFER; 667 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { 668 /* no vbus regulator is needed */ 669 platdata->reg_vbus = NULL; 670 } else if (IS_ERR(platdata->reg_vbus)) { 671 dev_err(dev, "Getting regulator error: %ld\n", 672 PTR_ERR(platdata->reg_vbus)); 673 return PTR_ERR(platdata->reg_vbus); 674 } 675 /* Get TPL support */ 676 if (!platdata->tpl_support) 677 platdata->tpl_support = 678 of_usb_host_tpl_support(dev->of_node); 679 } 680 681 if (platdata->dr_mode == USB_DR_MODE_OTG) { 682 /* We can support HNP and SRP of OTG 2.0 */ 683 platdata->ci_otg_caps.otg_rev = 0x0200; 684 platdata->ci_otg_caps.hnp_support = true; 685 platdata->ci_otg_caps.srp_support = true; 686 687 /* Update otg capabilities by DT properties */ 688 ret = of_usb_update_otg_caps(dev->of_node, 689 &platdata->ci_otg_caps); 690 if (ret) 691 return ret; 692 } 693 694 if (usb_get_maximum_speed(dev) == USB_SPEED_FULL) 695 platdata->flags |= CI_HDRC_FORCE_FULLSPEED; 696 697 of_property_read_u32(dev->of_node, "phy-clkgate-delay-us", 698 &platdata->phy_clkgate_delay_us); 699 700 platdata->itc_setting = 1; 701 702 of_property_read_u32(dev->of_node, "itc-setting", 703 &platdata->itc_setting); 704 705 ret = of_property_read_u32(dev->of_node, "ahb-burst-config", 706 &platdata->ahb_burst_config); 707 if (!ret) { 708 platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST; 709 } else if (ret != -EINVAL) { 710 dev_err(dev, "failed to get ahb-burst-config\n"); 711 return ret; 712 } 713 714 ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword", 715 &platdata->tx_burst_size); 716 if (!ret) { 717 platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST; 718 } else if (ret != -EINVAL) { 719 dev_err(dev, "failed to get tx-burst-size-dword\n"); 720 return ret; 721 } 722 723 ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword", 724 &platdata->rx_burst_size); 725 if (!ret) { 726 platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST; 727 } else if (ret != -EINVAL) { 728 dev_err(dev, "failed to get rx-burst-size-dword\n"); 729 return ret; 730 } 731 732 if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL)) 733 platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA; 734 735 ext_id = ERR_PTR(-ENODEV); 736 ext_vbus = ERR_PTR(-ENODEV); 737 if (of_property_read_bool(dev->of_node, "extcon")) { 738 /* Each one of them is not mandatory */ 739 ext_vbus = extcon_get_edev_by_phandle(dev, 0); 740 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) 741 return PTR_ERR(ext_vbus); 742 743 ext_id = extcon_get_edev_by_phandle(dev, 1); 744 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) 745 return PTR_ERR(ext_id); 746 } 747 748 cable = &platdata->vbus_extcon; 749 cable->nb.notifier_call = ci_cable_notifier; 750 cable->edev = ext_vbus; 751 752 if (!IS_ERR(ext_vbus)) { 753 ret = extcon_get_state(cable->edev, EXTCON_USB); 754 if (ret) 755 cable->connected = true; 756 else 757 cable->connected = false; 758 } 759 760 cable = &platdata->id_extcon; 761 cable->nb.notifier_call = ci_cable_notifier; 762 cable->edev = ext_id; 763 764 if (!IS_ERR(ext_id)) { 765 ret = extcon_get_state(cable->edev, EXTCON_USB_HOST); 766 if (ret) 767 cable->connected = true; 768 else 769 cable->connected = false; 770 } 771 772 if (device_property_read_bool(dev, "usb-role-switch")) 773 ci_role_switch.fwnode = dev->fwnode; 774 775 platdata->pctl = devm_pinctrl_get(dev); 776 if (!IS_ERR(platdata->pctl)) { 777 struct pinctrl_state *p; 778 779 p = pinctrl_lookup_state(platdata->pctl, "default"); 780 if (!IS_ERR(p)) 781 platdata->pins_default = p; 782 783 p = pinctrl_lookup_state(platdata->pctl, "host"); 784 if (!IS_ERR(p)) 785 platdata->pins_host = p; 786 787 p = pinctrl_lookup_state(platdata->pctl, "device"); 788 if (!IS_ERR(p)) 789 platdata->pins_device = p; 790 } 791 792 return 0; 793 } 794 795 static int ci_extcon_register(struct ci_hdrc *ci) 796 { 797 struct ci_hdrc_cable *id, *vbus; 798 int ret; 799 800 id = &ci->platdata->id_extcon; 801 id->ci = ci; 802 if (!IS_ERR_OR_NULL(id->edev)) { 803 ret = devm_extcon_register_notifier(ci->dev, id->edev, 804 EXTCON_USB_HOST, &id->nb); 805 if (ret < 0) { 806 dev_err(ci->dev, "register ID failed\n"); 807 return ret; 808 } 809 } 810 811 vbus = &ci->platdata->vbus_extcon; 812 vbus->ci = ci; 813 if (!IS_ERR_OR_NULL(vbus->edev)) { 814 ret = devm_extcon_register_notifier(ci->dev, vbus->edev, 815 EXTCON_USB, &vbus->nb); 816 if (ret < 0) { 817 dev_err(ci->dev, "register VBUS failed\n"); 818 return ret; 819 } 820 } 821 822 return 0; 823 } 824 825 static DEFINE_IDA(ci_ida); 826 827 struct platform_device *ci_hdrc_add_device(struct device *dev, 828 struct resource *res, int nres, 829 struct ci_hdrc_platform_data *platdata) 830 { 831 struct platform_device *pdev; 832 int id, ret; 833 834 ret = ci_get_platdata(dev, platdata); 835 if (ret) 836 return ERR_PTR(ret); 837 838 id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); 839 if (id < 0) 840 return ERR_PTR(id); 841 842 pdev = platform_device_alloc("ci_hdrc", id); 843 if (!pdev) { 844 ret = -ENOMEM; 845 goto put_id; 846 } 847 848 pdev->dev.parent = dev; 849 850 ret = platform_device_add_resources(pdev, res, nres); 851 if (ret) 852 goto err; 853 854 ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); 855 if (ret) 856 goto err; 857 858 ret = platform_device_add(pdev); 859 if (ret) 860 goto err; 861 862 return pdev; 863 864 err: 865 platform_device_put(pdev); 866 put_id: 867 ida_simple_remove(&ci_ida, id); 868 return ERR_PTR(ret); 869 } 870 EXPORT_SYMBOL_GPL(ci_hdrc_add_device); 871 872 void ci_hdrc_remove_device(struct platform_device *pdev) 873 { 874 int id = pdev->id; 875 platform_device_unregister(pdev); 876 ida_simple_remove(&ci_ida, id); 877 } 878 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); 879 880 static inline void ci_role_destroy(struct ci_hdrc *ci) 881 { 882 ci_hdrc_gadget_destroy(ci); 883 ci_hdrc_host_destroy(ci); 884 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) 885 ci_hdrc_otg_destroy(ci); 886 } 887 888 static void ci_get_otg_capable(struct ci_hdrc *ci) 889 { 890 if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) 891 ci->is_otg = false; 892 else 893 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, 894 DCCPARAMS_DC | DCCPARAMS_HC) 895 == (DCCPARAMS_DC | DCCPARAMS_HC)); 896 if (ci->is_otg) { 897 dev_dbg(ci->dev, "It is OTG capable controller\n"); 898 /* Disable and clear all OTG irq */ 899 hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, 900 OTGSC_INT_STATUS_BITS); 901 } 902 } 903 904 static ssize_t role_show(struct device *dev, struct device_attribute *attr, 905 char *buf) 906 { 907 struct ci_hdrc *ci = dev_get_drvdata(dev); 908 909 if (ci->role != CI_ROLE_END) 910 return sprintf(buf, "%s\n", ci_role(ci)->name); 911 912 return 0; 913 } 914 915 static ssize_t role_store(struct device *dev, 916 struct device_attribute *attr, const char *buf, size_t n) 917 { 918 struct ci_hdrc *ci = dev_get_drvdata(dev); 919 enum ci_role role; 920 int ret; 921 922 if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) { 923 dev_warn(dev, "Current configuration is not dual-role, quit\n"); 924 return -EPERM; 925 } 926 927 for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++) 928 if (!strncmp(buf, ci->roles[role]->name, 929 strlen(ci->roles[role]->name))) 930 break; 931 932 if (role == CI_ROLE_END || role == ci->role) 933 return -EINVAL; 934 935 pm_runtime_get_sync(dev); 936 disable_irq(ci->irq); 937 ci_role_stop(ci); 938 ret = ci_role_start(ci, role); 939 if (!ret && ci->role == CI_ROLE_GADGET) 940 ci_handle_vbus_change(ci); 941 enable_irq(ci->irq); 942 pm_runtime_put_sync(dev); 943 944 return (ret == 0) ? n : ret; 945 } 946 static DEVICE_ATTR_RW(role); 947 948 static struct attribute *ci_attrs[] = { 949 &dev_attr_role.attr, 950 NULL, 951 }; 952 ATTRIBUTE_GROUPS(ci); 953 954 static int ci_hdrc_probe(struct platform_device *pdev) 955 { 956 struct device *dev = &pdev->dev; 957 struct ci_hdrc *ci; 958 struct resource *res; 959 void __iomem *base; 960 int ret; 961 enum usb_dr_mode dr_mode; 962 963 if (!dev_get_platdata(dev)) { 964 dev_err(dev, "platform data missing\n"); 965 return -ENODEV; 966 } 967 968 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 969 base = devm_ioremap_resource(dev, res); 970 if (IS_ERR(base)) 971 return PTR_ERR(base); 972 973 ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); 974 if (!ci) 975 return -ENOMEM; 976 977 spin_lock_init(&ci->lock); 978 ci->dev = dev; 979 ci->platdata = dev_get_platdata(dev); 980 ci->imx28_write_fix = !!(ci->platdata->flags & 981 CI_HDRC_IMX28_WRITE_FIX); 982 ci->supports_runtime_pm = !!(ci->platdata->flags & 983 CI_HDRC_SUPPORTS_RUNTIME_PM); 984 platform_set_drvdata(pdev, ci); 985 986 ret = hw_device_init(ci, base); 987 if (ret < 0) { 988 dev_err(dev, "can't initialize hardware\n"); 989 return -ENODEV; 990 } 991 992 ret = ci_ulpi_init(ci); 993 if (ret) 994 return ret; 995 996 if (ci->platdata->phy) { 997 ci->phy = ci->platdata->phy; 998 } else if (ci->platdata->usb_phy) { 999 ci->usb_phy = ci->platdata->usb_phy; 1000 } else { 1001 /* Look for a generic PHY first */ 1002 ci->phy = devm_phy_get(dev->parent, "usb-phy"); 1003 1004 if (PTR_ERR(ci->phy) == -EPROBE_DEFER) { 1005 ret = -EPROBE_DEFER; 1006 goto ulpi_exit; 1007 } else if (IS_ERR(ci->phy)) { 1008 ci->phy = NULL; 1009 } 1010 1011 /* Look for a legacy USB PHY from device-tree next */ 1012 if (!ci->phy) { 1013 ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, 1014 "phys", 0); 1015 1016 if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) { 1017 ret = -EPROBE_DEFER; 1018 goto ulpi_exit; 1019 } else if (IS_ERR(ci->usb_phy)) { 1020 ci->usb_phy = NULL; 1021 } 1022 } 1023 1024 /* Look for any registered legacy USB PHY as last resort */ 1025 if (!ci->phy && !ci->usb_phy) { 1026 ci->usb_phy = devm_usb_get_phy(dev->parent, 1027 USB_PHY_TYPE_USB2); 1028 1029 if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) { 1030 ret = -EPROBE_DEFER; 1031 goto ulpi_exit; 1032 } else if (IS_ERR(ci->usb_phy)) { 1033 ci->usb_phy = NULL; 1034 } 1035 } 1036 1037 /* No USB PHY was found in the end */ 1038 if (!ci->phy && !ci->usb_phy) { 1039 ret = -ENXIO; 1040 goto ulpi_exit; 1041 } 1042 } 1043 1044 ret = ci_usb_phy_init(ci); 1045 if (ret) { 1046 dev_err(dev, "unable to init phy: %d\n", ret); 1047 return ret; 1048 } 1049 1050 ci->hw_bank.phys = res->start; 1051 1052 ci->irq = platform_get_irq(pdev, 0); 1053 if (ci->irq < 0) { 1054 ret = ci->irq; 1055 goto deinit_phy; 1056 } 1057 1058 ci_get_otg_capable(ci); 1059 1060 dr_mode = ci->platdata->dr_mode; 1061 /* initialize role(s) before the interrupt is requested */ 1062 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { 1063 ret = ci_hdrc_host_init(ci); 1064 if (ret) { 1065 if (ret == -ENXIO) 1066 dev_info(dev, "doesn't support host\n"); 1067 else 1068 goto deinit_phy; 1069 } 1070 } 1071 1072 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { 1073 ret = ci_hdrc_gadget_init(ci); 1074 if (ret) { 1075 if (ret == -ENXIO) 1076 dev_info(dev, "doesn't support gadget\n"); 1077 else 1078 goto deinit_host; 1079 } 1080 } 1081 1082 if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { 1083 dev_err(dev, "no supported roles\n"); 1084 ret = -ENODEV; 1085 goto deinit_gadget; 1086 } 1087 1088 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { 1089 ret = ci_hdrc_otg_init(ci); 1090 if (ret) { 1091 dev_err(dev, "init otg fails, ret = %d\n", ret); 1092 goto deinit_gadget; 1093 } 1094 } 1095 1096 if (ci_role_switch.fwnode) { 1097 ci_role_switch.driver_data = ci; 1098 ci->role_switch = usb_role_switch_register(dev, 1099 &ci_role_switch); 1100 if (IS_ERR(ci->role_switch)) { 1101 ret = PTR_ERR(ci->role_switch); 1102 goto deinit_otg; 1103 } 1104 } 1105 1106 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { 1107 if (ci->is_otg) { 1108 ci->role = ci_otg_role(ci); 1109 /* Enable ID change irq */ 1110 hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); 1111 } else { 1112 /* 1113 * If the controller is not OTG capable, but support 1114 * role switch, the defalt role is gadget, and the 1115 * user can switch it through debugfs. 1116 */ 1117 ci->role = CI_ROLE_GADGET; 1118 } 1119 } else { 1120 ci->role = ci->roles[CI_ROLE_HOST] 1121 ? CI_ROLE_HOST 1122 : CI_ROLE_GADGET; 1123 } 1124 1125 if (!ci_otg_is_fsm_mode(ci)) { 1126 /* only update vbus status for peripheral */ 1127 if (ci->role == CI_ROLE_GADGET) { 1128 /* Pull down DP for possible charger detection */ 1129 hw_write(ci, OP_USBCMD, USBCMD_RS, 0); 1130 ci_handle_vbus_change(ci); 1131 } 1132 1133 ret = ci_role_start(ci, ci->role); 1134 if (ret) { 1135 dev_err(dev, "can't start %s role\n", 1136 ci_role(ci)->name); 1137 goto stop; 1138 } 1139 } 1140 1141 ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED, 1142 ci->platdata->name, ci); 1143 if (ret) 1144 goto stop; 1145 1146 ret = ci_extcon_register(ci); 1147 if (ret) 1148 goto stop; 1149 1150 if (ci->supports_runtime_pm) { 1151 pm_runtime_set_active(&pdev->dev); 1152 pm_runtime_enable(&pdev->dev); 1153 pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); 1154 pm_runtime_mark_last_busy(ci->dev); 1155 pm_runtime_use_autosuspend(&pdev->dev); 1156 } 1157 1158 if (ci_otg_is_fsm_mode(ci)) 1159 ci_hdrc_otg_fsm_start(ci); 1160 1161 device_set_wakeup_capable(&pdev->dev, true); 1162 dbg_create_files(ci); 1163 1164 return 0; 1165 1166 stop: 1167 if (ci->role_switch) 1168 usb_role_switch_unregister(ci->role_switch); 1169 deinit_otg: 1170 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) 1171 ci_hdrc_otg_destroy(ci); 1172 deinit_gadget: 1173 ci_hdrc_gadget_destroy(ci); 1174 deinit_host: 1175 ci_hdrc_host_destroy(ci); 1176 deinit_phy: 1177 ci_usb_phy_exit(ci); 1178 ulpi_exit: 1179 ci_ulpi_exit(ci); 1180 1181 return ret; 1182 } 1183 1184 static int ci_hdrc_remove(struct platform_device *pdev) 1185 { 1186 struct ci_hdrc *ci = platform_get_drvdata(pdev); 1187 1188 if (ci->role_switch) 1189 usb_role_switch_unregister(ci->role_switch); 1190 1191 if (ci->supports_runtime_pm) { 1192 pm_runtime_get_sync(&pdev->dev); 1193 pm_runtime_disable(&pdev->dev); 1194 pm_runtime_put_noidle(&pdev->dev); 1195 } 1196 1197 dbg_remove_files(ci); 1198 ci_role_destroy(ci); 1199 ci_hdrc_enter_lpm(ci, true); 1200 ci_usb_phy_exit(ci); 1201 ci_ulpi_exit(ci); 1202 1203 return 0; 1204 } 1205 1206 #ifdef CONFIG_PM 1207 /* Prepare wakeup by SRP before suspend */ 1208 static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci) 1209 { 1210 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && 1211 !hw_read_otgsc(ci, OTGSC_ID)) { 1212 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 1213 PORTSC_PP); 1214 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN, 1215 PORTSC_WKCN); 1216 } 1217 } 1218 1219 /* Handle SRP when wakeup by data pulse */ 1220 static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci) 1221 { 1222 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && 1223 (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) { 1224 if (!hw_read_otgsc(ci, OTGSC_ID)) { 1225 ci->fsm.a_srp_det = 1; 1226 ci->fsm.a_bus_drop = 0; 1227 } else { 1228 ci->fsm.id = 1; 1229 } 1230 ci_otg_queue_work(ci); 1231 } 1232 } 1233 1234 static void ci_controller_suspend(struct ci_hdrc *ci) 1235 { 1236 disable_irq(ci->irq); 1237 ci_hdrc_enter_lpm(ci, true); 1238 if (ci->platdata->phy_clkgate_delay_us) 1239 usleep_range(ci->platdata->phy_clkgate_delay_us, 1240 ci->platdata->phy_clkgate_delay_us + 50); 1241 usb_phy_set_suspend(ci->usb_phy, 1); 1242 ci->in_lpm = true; 1243 enable_irq(ci->irq); 1244 } 1245 1246 /* 1247 * Handle the wakeup interrupt triggered by extcon connector 1248 * We need to call ci_irq again for extcon since the first 1249 * interrupt (wakeup int) only let the controller be out of 1250 * low power mode, but not handle any interrupts. 1251 */ 1252 static void ci_extcon_wakeup_int(struct ci_hdrc *ci) 1253 { 1254 struct ci_hdrc_cable *cable_id, *cable_vbus; 1255 u32 otgsc = hw_read_otgsc(ci, ~0); 1256 1257 cable_id = &ci->platdata->id_extcon; 1258 cable_vbus = &ci->platdata->vbus_extcon; 1259 1260 if (!IS_ERR(cable_id->edev) && ci->is_otg && 1261 (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) 1262 ci_irq(ci->irq, ci); 1263 1264 if (!IS_ERR(cable_vbus->edev) && ci->is_otg && 1265 (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) 1266 ci_irq(ci->irq, ci); 1267 } 1268 1269 static int ci_controller_resume(struct device *dev) 1270 { 1271 struct ci_hdrc *ci = dev_get_drvdata(dev); 1272 int ret; 1273 1274 dev_dbg(dev, "at %s\n", __func__); 1275 1276 if (!ci->in_lpm) { 1277 WARN_ON(1); 1278 return 0; 1279 } 1280 1281 ci_hdrc_enter_lpm(ci, false); 1282 1283 ret = ci_ulpi_resume(ci); 1284 if (ret) 1285 return ret; 1286 1287 if (ci->usb_phy) { 1288 usb_phy_set_suspend(ci->usb_phy, 0); 1289 usb_phy_set_wakeup(ci->usb_phy, false); 1290 hw_wait_phy_stable(); 1291 } 1292 1293 ci->in_lpm = false; 1294 if (ci->wakeup_int) { 1295 ci->wakeup_int = false; 1296 pm_runtime_mark_last_busy(ci->dev); 1297 pm_runtime_put_autosuspend(ci->dev); 1298 enable_irq(ci->irq); 1299 if (ci_otg_is_fsm_mode(ci)) 1300 ci_otg_fsm_wakeup_by_srp(ci); 1301 ci_extcon_wakeup_int(ci); 1302 } 1303 1304 return 0; 1305 } 1306 1307 #ifdef CONFIG_PM_SLEEP 1308 static int ci_suspend(struct device *dev) 1309 { 1310 struct ci_hdrc *ci = dev_get_drvdata(dev); 1311 1312 if (ci->wq) 1313 flush_workqueue(ci->wq); 1314 /* 1315 * Controller needs to be active during suspend, otherwise the core 1316 * may run resume when the parent is at suspend if other driver's 1317 * suspend fails, it occurs before parent's suspend has not started, 1318 * but the core suspend has finished. 1319 */ 1320 if (ci->in_lpm) 1321 pm_runtime_resume(dev); 1322 1323 if (ci->in_lpm) { 1324 WARN_ON(1); 1325 return 0; 1326 } 1327 1328 if (device_may_wakeup(dev)) { 1329 if (ci_otg_is_fsm_mode(ci)) 1330 ci_otg_fsm_suspend_for_srp(ci); 1331 1332 usb_phy_set_wakeup(ci->usb_phy, true); 1333 enable_irq_wake(ci->irq); 1334 } 1335 1336 ci_controller_suspend(ci); 1337 1338 return 0; 1339 } 1340 1341 static int ci_resume(struct device *dev) 1342 { 1343 struct ci_hdrc *ci = dev_get_drvdata(dev); 1344 int ret; 1345 1346 if (device_may_wakeup(dev)) 1347 disable_irq_wake(ci->irq); 1348 1349 ret = ci_controller_resume(dev); 1350 if (ret) 1351 return ret; 1352 1353 if (ci->supports_runtime_pm) { 1354 pm_runtime_disable(dev); 1355 pm_runtime_set_active(dev); 1356 pm_runtime_enable(dev); 1357 } 1358 1359 return ret; 1360 } 1361 #endif /* CONFIG_PM_SLEEP */ 1362 1363 static int ci_runtime_suspend(struct device *dev) 1364 { 1365 struct ci_hdrc *ci = dev_get_drvdata(dev); 1366 1367 dev_dbg(dev, "at %s\n", __func__); 1368 1369 if (ci->in_lpm) { 1370 WARN_ON(1); 1371 return 0; 1372 } 1373 1374 if (ci_otg_is_fsm_mode(ci)) 1375 ci_otg_fsm_suspend_for_srp(ci); 1376 1377 usb_phy_set_wakeup(ci->usb_phy, true); 1378 ci_controller_suspend(ci); 1379 1380 return 0; 1381 } 1382 1383 static int ci_runtime_resume(struct device *dev) 1384 { 1385 return ci_controller_resume(dev); 1386 } 1387 1388 #endif /* CONFIG_PM */ 1389 static const struct dev_pm_ops ci_pm_ops = { 1390 SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume) 1391 SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL) 1392 }; 1393 1394 static struct platform_driver ci_hdrc_driver = { 1395 .probe = ci_hdrc_probe, 1396 .remove = ci_hdrc_remove, 1397 .driver = { 1398 .name = "ci_hdrc", 1399 .pm = &ci_pm_ops, 1400 .dev_groups = ci_groups, 1401 }, 1402 }; 1403 1404 static int __init ci_hdrc_platform_register(void) 1405 { 1406 ci_hdrc_host_driver_init(); 1407 return platform_driver_register(&ci_hdrc_driver); 1408 } 1409 module_init(ci_hdrc_platform_register); 1410 1411 static void __exit ci_hdrc_platform_unregister(void) 1412 { 1413 platform_driver_unregister(&ci_hdrc_driver); 1414 } 1415 module_exit(ci_hdrc_platform_unregister); 1416 1417 MODULE_ALIAS("platform:ci_hdrc"); 1418 MODULE_LICENSE("GPL v2"); 1419 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>"); 1420 MODULE_DESCRIPTION("ChipIdea HDRC Driver"); 1421