xref: /openbmc/linux/drivers/usb/chipidea/core.c (revision 015d239a)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * core.c - ChipIdea USB IP core family device controller
4  *
5  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
6  *
7  * Author: David Lopo
8  */
9 
10 /*
11  * Description: ChipIdea USB IP core family device controller
12  *
13  * This driver is composed of several blocks:
14  * - HW:     hardware interface
15  * - DBG:    debug facilities (optional)
16  * - UTIL:   utilities
17  * - ISR:    interrupts handling
18  * - ENDPT:  endpoint operations (Gadget API)
19  * - GADGET: gadget operations (Gadget API)
20  * - BUS:    bus glue code, bus abstraction layer
21  *
22  * Compile Options
23  * - STALL_IN:  non-empty bulk-in pipes cannot be halted
24  *              if defined mass storage compliance succeeds but with warnings
25  *              => case 4: Hi >  Dn
26  *              => case 5: Hi >  Di
27  *              => case 8: Hi <> Do
28  *              if undefined usbtest 13 fails
29  * - TRACE:     enable function tracing (depends on DEBUG)
30  *
31  * Main Features
32  * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
33  * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
34  * - Normal & LPM support
35  *
36  * USBTEST Report
37  * - OK: 0-12, 13 (STALL_IN defined) & 14
38  * - Not Supported: 15 & 16 (ISO)
39  *
40  * TODO List
41  * - Suspend & Remote Wakeup
42  */
43 #include <linux/delay.h>
44 #include <linux/device.h>
45 #include <linux/dma-mapping.h>
46 #include <linux/extcon.h>
47 #include <linux/phy/phy.h>
48 #include <linux/platform_device.h>
49 #include <linux/module.h>
50 #include <linux/idr.h>
51 #include <linux/interrupt.h>
52 #include <linux/io.h>
53 #include <linux/kernel.h>
54 #include <linux/slab.h>
55 #include <linux/pm_runtime.h>
56 #include <linux/pinctrl/consumer.h>
57 #include <linux/usb/ch9.h>
58 #include <linux/usb/gadget.h>
59 #include <linux/usb/otg.h>
60 #include <linux/usb/chipidea.h>
61 #include <linux/usb/of.h>
62 #include <linux/of.h>
63 #include <linux/regulator/consumer.h>
64 #include <linux/usb/ehci_def.h>
65 
66 #include "ci.h"
67 #include "udc.h"
68 #include "bits.h"
69 #include "host.h"
70 #include "otg.h"
71 #include "otg_fsm.h"
72 
73 /* Controller register map */
74 static const u8 ci_regs_nolpm[] = {
75 	[CAP_CAPLENGTH]		= 0x00U,
76 	[CAP_HCCPARAMS]		= 0x08U,
77 	[CAP_DCCPARAMS]		= 0x24U,
78 	[CAP_TESTMODE]		= 0x38U,
79 	[OP_USBCMD]		= 0x00U,
80 	[OP_USBSTS]		= 0x04U,
81 	[OP_USBINTR]		= 0x08U,
82 	[OP_DEVICEADDR]		= 0x14U,
83 	[OP_ENDPTLISTADDR]	= 0x18U,
84 	[OP_TTCTRL]		= 0x1CU,
85 	[OP_BURSTSIZE]		= 0x20U,
86 	[OP_ULPI_VIEWPORT]	= 0x30U,
87 	[OP_PORTSC]		= 0x44U,
88 	[OP_DEVLC]		= 0x84U,
89 	[OP_OTGSC]		= 0x64U,
90 	[OP_USBMODE]		= 0x68U,
91 	[OP_ENDPTSETUPSTAT]	= 0x6CU,
92 	[OP_ENDPTPRIME]		= 0x70U,
93 	[OP_ENDPTFLUSH]		= 0x74U,
94 	[OP_ENDPTSTAT]		= 0x78U,
95 	[OP_ENDPTCOMPLETE]	= 0x7CU,
96 	[OP_ENDPTCTRL]		= 0x80U,
97 };
98 
99 static const u8 ci_regs_lpm[] = {
100 	[CAP_CAPLENGTH]		= 0x00U,
101 	[CAP_HCCPARAMS]		= 0x08U,
102 	[CAP_DCCPARAMS]		= 0x24U,
103 	[CAP_TESTMODE]		= 0xFCU,
104 	[OP_USBCMD]		= 0x00U,
105 	[OP_USBSTS]		= 0x04U,
106 	[OP_USBINTR]		= 0x08U,
107 	[OP_DEVICEADDR]		= 0x14U,
108 	[OP_ENDPTLISTADDR]	= 0x18U,
109 	[OP_TTCTRL]		= 0x1CU,
110 	[OP_BURSTSIZE]		= 0x20U,
111 	[OP_ULPI_VIEWPORT]	= 0x30U,
112 	[OP_PORTSC]		= 0x44U,
113 	[OP_DEVLC]		= 0x84U,
114 	[OP_OTGSC]		= 0xC4U,
115 	[OP_USBMODE]		= 0xC8U,
116 	[OP_ENDPTSETUPSTAT]	= 0xD8U,
117 	[OP_ENDPTPRIME]		= 0xDCU,
118 	[OP_ENDPTFLUSH]		= 0xE0U,
119 	[OP_ENDPTSTAT]		= 0xE4U,
120 	[OP_ENDPTCOMPLETE]	= 0xE8U,
121 	[OP_ENDPTCTRL]		= 0xECU,
122 };
123 
124 static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
125 {
126 	int i;
127 
128 	for (i = 0; i < OP_ENDPTCTRL; i++)
129 		ci->hw_bank.regmap[i] =
130 			(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
131 			(is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
132 
133 	for (; i <= OP_LAST; i++)
134 		ci->hw_bank.regmap[i] = ci->hw_bank.op +
135 			4 * (i - OP_ENDPTCTRL) +
136 			(is_lpm
137 			 ? ci_regs_lpm[OP_ENDPTCTRL]
138 			 : ci_regs_nolpm[OP_ENDPTCTRL]);
139 
140 }
141 
142 static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
143 {
144 	int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
145 	enum ci_revision rev = CI_REVISION_UNKNOWN;
146 
147 	if (ver == 0x2) {
148 		rev = hw_read_id_reg(ci, ID_ID, REVISION)
149 			>> __ffs(REVISION);
150 		rev += CI_REVISION_20;
151 	} else if (ver == 0x0) {
152 		rev = CI_REVISION_1X;
153 	}
154 
155 	return rev;
156 }
157 
158 /**
159  * hw_read_intr_enable: returns interrupt enable register
160  *
161  * @ci: the controller
162  *
163  * This function returns register data
164  */
165 u32 hw_read_intr_enable(struct ci_hdrc *ci)
166 {
167 	return hw_read(ci, OP_USBINTR, ~0);
168 }
169 
170 /**
171  * hw_read_intr_status: returns interrupt status register
172  *
173  * @ci: the controller
174  *
175  * This function returns register data
176  */
177 u32 hw_read_intr_status(struct ci_hdrc *ci)
178 {
179 	return hw_read(ci, OP_USBSTS, ~0);
180 }
181 
182 /**
183  * hw_port_test_set: writes port test mode (execute without interruption)
184  * @mode: new value
185  *
186  * This function returns an error code
187  */
188 int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
189 {
190 	const u8 TEST_MODE_MAX = 7;
191 
192 	if (mode > TEST_MODE_MAX)
193 		return -EINVAL;
194 
195 	hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
196 	return 0;
197 }
198 
199 /**
200  * hw_port_test_get: reads port test mode value
201  *
202  * @ci: the controller
203  *
204  * This function returns port test mode value
205  */
206 u8 hw_port_test_get(struct ci_hdrc *ci)
207 {
208 	return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
209 }
210 
211 static void hw_wait_phy_stable(void)
212 {
213 	/*
214 	 * The phy needs some delay to output the stable status from low
215 	 * power mode. And for OTGSC, the status inputs are debounced
216 	 * using a 1 ms time constant, so, delay 2ms for controller to get
217 	 * the stable status, like vbus and id when the phy leaves low power.
218 	 */
219 	usleep_range(2000, 2500);
220 }
221 
222 /* The PHY enters/leaves low power mode */
223 static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
224 {
225 	enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
226 	bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
227 
228 	if (enable && !lpm)
229 		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
230 				PORTSC_PHCD(ci->hw_bank.lpm));
231 	else if (!enable && lpm)
232 		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
233 				0);
234 }
235 
236 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
237 {
238 	u32 reg;
239 
240 	/* bank is a module variable */
241 	ci->hw_bank.abs = base;
242 
243 	ci->hw_bank.cap = ci->hw_bank.abs;
244 	ci->hw_bank.cap += ci->platdata->capoffset;
245 	ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
246 
247 	hw_alloc_regmap(ci, false);
248 	reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
249 		__ffs(HCCPARAMS_LEN);
250 	ci->hw_bank.lpm  = reg;
251 	if (reg)
252 		hw_alloc_regmap(ci, !!reg);
253 	ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
254 	ci->hw_bank.size += OP_LAST;
255 	ci->hw_bank.size /= sizeof(u32);
256 
257 	reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
258 		__ffs(DCCPARAMS_DEN);
259 	ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
260 
261 	if (ci->hw_ep_max > ENDPT_MAX)
262 		return -ENODEV;
263 
264 	ci_hdrc_enter_lpm(ci, false);
265 
266 	/* Disable all interrupts bits */
267 	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
268 
269 	/* Clear all interrupts status bits*/
270 	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
271 
272 	ci->rev = ci_get_revision(ci);
273 
274 	dev_dbg(ci->dev,
275 		"ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
276 		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
277 
278 	/* setup lock mode ? */
279 
280 	/* ENDPTSETUPSTAT is '0' by default */
281 
282 	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
283 
284 	return 0;
285 }
286 
287 void hw_phymode_configure(struct ci_hdrc *ci)
288 {
289 	u32 portsc, lpm, sts = 0;
290 
291 	switch (ci->platdata->phy_mode) {
292 	case USBPHY_INTERFACE_MODE_UTMI:
293 		portsc = PORTSC_PTS(PTS_UTMI);
294 		lpm = DEVLC_PTS(PTS_UTMI);
295 		break;
296 	case USBPHY_INTERFACE_MODE_UTMIW:
297 		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
298 		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
299 		break;
300 	case USBPHY_INTERFACE_MODE_ULPI:
301 		portsc = PORTSC_PTS(PTS_ULPI);
302 		lpm = DEVLC_PTS(PTS_ULPI);
303 		break;
304 	case USBPHY_INTERFACE_MODE_SERIAL:
305 		portsc = PORTSC_PTS(PTS_SERIAL);
306 		lpm = DEVLC_PTS(PTS_SERIAL);
307 		sts = 1;
308 		break;
309 	case USBPHY_INTERFACE_MODE_HSIC:
310 		portsc = PORTSC_PTS(PTS_HSIC);
311 		lpm = DEVLC_PTS(PTS_HSIC);
312 		break;
313 	default:
314 		return;
315 	}
316 
317 	if (ci->hw_bank.lpm) {
318 		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
319 		if (sts)
320 			hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
321 	} else {
322 		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
323 		if (sts)
324 			hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
325 	}
326 }
327 EXPORT_SYMBOL_GPL(hw_phymode_configure);
328 
329 /**
330  * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
331  * interfaces
332  * @ci: the controller
333  *
334  * This function returns an error code if the phy failed to init
335  */
336 static int _ci_usb_phy_init(struct ci_hdrc *ci)
337 {
338 	int ret;
339 
340 	if (ci->phy) {
341 		ret = phy_init(ci->phy);
342 		if (ret)
343 			return ret;
344 
345 		ret = phy_power_on(ci->phy);
346 		if (ret) {
347 			phy_exit(ci->phy);
348 			return ret;
349 		}
350 	} else {
351 		ret = usb_phy_init(ci->usb_phy);
352 	}
353 
354 	return ret;
355 }
356 
357 /**
358  * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
359  * interfaces
360  * @ci: the controller
361  */
362 static void ci_usb_phy_exit(struct ci_hdrc *ci)
363 {
364 	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
365 		return;
366 
367 	if (ci->phy) {
368 		phy_power_off(ci->phy);
369 		phy_exit(ci->phy);
370 	} else {
371 		usb_phy_shutdown(ci->usb_phy);
372 	}
373 }
374 
375 /**
376  * ci_usb_phy_init: initialize phy according to different phy type
377  * @ci: the controller
378  *
379  * This function returns an error code if usb_phy_init has failed
380  */
381 static int ci_usb_phy_init(struct ci_hdrc *ci)
382 {
383 	int ret;
384 
385 	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
386 		return 0;
387 
388 	switch (ci->platdata->phy_mode) {
389 	case USBPHY_INTERFACE_MODE_UTMI:
390 	case USBPHY_INTERFACE_MODE_UTMIW:
391 	case USBPHY_INTERFACE_MODE_HSIC:
392 		ret = _ci_usb_phy_init(ci);
393 		if (!ret)
394 			hw_wait_phy_stable();
395 		else
396 			return ret;
397 		hw_phymode_configure(ci);
398 		break;
399 	case USBPHY_INTERFACE_MODE_ULPI:
400 	case USBPHY_INTERFACE_MODE_SERIAL:
401 		hw_phymode_configure(ci);
402 		ret = _ci_usb_phy_init(ci);
403 		if (ret)
404 			return ret;
405 		break;
406 	default:
407 		ret = _ci_usb_phy_init(ci);
408 		if (!ret)
409 			hw_wait_phy_stable();
410 	}
411 
412 	return ret;
413 }
414 
415 
416 /**
417  * ci_platform_configure: do controller configure
418  * @ci: the controller
419  *
420  */
421 void ci_platform_configure(struct ci_hdrc *ci)
422 {
423 	bool is_device_mode, is_host_mode;
424 
425 	is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
426 	is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
427 
428 	if (is_device_mode) {
429 		phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
430 
431 		if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
432 			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
433 				 USBMODE_CI_SDIS);
434 	}
435 
436 	if (is_host_mode) {
437 		phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
438 
439 		if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
440 			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
441 				 USBMODE_CI_SDIS);
442 	}
443 
444 	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
445 		if (ci->hw_bank.lpm)
446 			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
447 		else
448 			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
449 	}
450 
451 	if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
452 		hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
453 
454 	hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
455 
456 	if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
457 		hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
458 			ci->platdata->ahb_burst_config);
459 
460 	/* override burst size, take effect only when ahb_burst_config is 0 */
461 	if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
462 		if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
463 			hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
464 			ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
465 
466 		if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
467 			hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
468 				ci->platdata->rx_burst_size);
469 	}
470 }
471 
472 /**
473  * hw_controller_reset: do controller reset
474  * @ci: the controller
475   *
476  * This function returns an error code
477  */
478 static int hw_controller_reset(struct ci_hdrc *ci)
479 {
480 	int count = 0;
481 
482 	hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
483 	while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
484 		udelay(10);
485 		if (count++ > 1000)
486 			return -ETIMEDOUT;
487 	}
488 
489 	return 0;
490 }
491 
492 /**
493  * hw_device_reset: resets chip (execute without interruption)
494  * @ci: the controller
495  *
496  * This function returns an error code
497  */
498 int hw_device_reset(struct ci_hdrc *ci)
499 {
500 	int ret;
501 
502 	/* should flush & stop before reset */
503 	hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
504 	hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
505 
506 	ret = hw_controller_reset(ci);
507 	if (ret) {
508 		dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
509 		return ret;
510 	}
511 
512 	if (ci->platdata->notify_event) {
513 		ret = ci->platdata->notify_event(ci,
514 			CI_HDRC_CONTROLLER_RESET_EVENT);
515 		if (ret)
516 			return ret;
517 	}
518 
519 	/* USBMODE should be configured step by step */
520 	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
521 	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
522 	/* HW >= 2.3 */
523 	hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
524 
525 	if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
526 		dev_err(ci->dev, "cannot enter in %s device mode\n",
527 			ci_role(ci)->name);
528 		dev_err(ci->dev, "lpm = %i\n", ci->hw_bank.lpm);
529 		return -ENODEV;
530 	}
531 
532 	ci_platform_configure(ci);
533 
534 	return 0;
535 }
536 
537 static irqreturn_t ci_irq(int irq, void *data)
538 {
539 	struct ci_hdrc *ci = data;
540 	irqreturn_t ret = IRQ_NONE;
541 	u32 otgsc = 0;
542 
543 	if (ci->in_lpm) {
544 		disable_irq_nosync(irq);
545 		ci->wakeup_int = true;
546 		pm_runtime_get(ci->dev);
547 		return IRQ_HANDLED;
548 	}
549 
550 	if (ci->is_otg) {
551 		otgsc = hw_read_otgsc(ci, ~0);
552 		if (ci_otg_is_fsm_mode(ci)) {
553 			ret = ci_otg_fsm_irq(ci);
554 			if (ret == IRQ_HANDLED)
555 				return ret;
556 		}
557 	}
558 
559 	/*
560 	 * Handle id change interrupt, it indicates device/host function
561 	 * switch.
562 	 */
563 	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
564 		ci->id_event = true;
565 		/* Clear ID change irq status */
566 		hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
567 		ci_otg_queue_work(ci);
568 		return IRQ_HANDLED;
569 	}
570 
571 	/*
572 	 * Handle vbus change interrupt, it indicates device connection
573 	 * and disconnection events.
574 	 */
575 	if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
576 		ci->b_sess_valid_event = true;
577 		/* Clear BSV irq */
578 		hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
579 		ci_otg_queue_work(ci);
580 		return IRQ_HANDLED;
581 	}
582 
583 	/* Handle device/host interrupt */
584 	if (ci->role != CI_ROLE_END)
585 		ret = ci_role(ci)->irq(ci);
586 
587 	return ret;
588 }
589 
590 static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
591 			     void *ptr)
592 {
593 	struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
594 	struct ci_hdrc *ci = cbl->ci;
595 
596 	cbl->connected = event;
597 	cbl->changed = true;
598 
599 	ci_irq(ci->irq, ci);
600 	return NOTIFY_DONE;
601 }
602 
603 static enum usb_role ci_usb_role_switch_get(struct device *dev)
604 {
605 	struct ci_hdrc *ci = dev_get_drvdata(dev);
606 	enum usb_role role;
607 	unsigned long flags;
608 
609 	spin_lock_irqsave(&ci->lock, flags);
610 	role = ci_role_to_usb_role(ci);
611 	spin_unlock_irqrestore(&ci->lock, flags);
612 
613 	return role;
614 }
615 
616 static int ci_usb_role_switch_set(struct device *dev, enum usb_role role)
617 {
618 	struct ci_hdrc *ci = dev_get_drvdata(dev);
619 	struct ci_hdrc_cable *cable = NULL;
620 	enum usb_role current_role = ci_role_to_usb_role(ci);
621 	enum ci_role ci_role = usb_role_to_ci_role(role);
622 	unsigned long flags;
623 
624 	if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) ||
625 	    (current_role == role))
626 		return 0;
627 
628 	pm_runtime_get_sync(ci->dev);
629 	/* Stop current role */
630 	spin_lock_irqsave(&ci->lock, flags);
631 	if (current_role == USB_ROLE_DEVICE)
632 		cable = &ci->platdata->vbus_extcon;
633 	else if (current_role == USB_ROLE_HOST)
634 		cable = &ci->platdata->id_extcon;
635 
636 	if (cable) {
637 		cable->changed = true;
638 		cable->connected = false;
639 		ci_irq(ci->irq, ci);
640 		spin_unlock_irqrestore(&ci->lock, flags);
641 		if (ci->wq && role != USB_ROLE_NONE)
642 			flush_workqueue(ci->wq);
643 		spin_lock_irqsave(&ci->lock, flags);
644 	}
645 
646 	cable = NULL;
647 
648 	/* Start target role */
649 	if (role == USB_ROLE_DEVICE)
650 		cable = &ci->platdata->vbus_extcon;
651 	else if (role == USB_ROLE_HOST)
652 		cable = &ci->platdata->id_extcon;
653 
654 	if (cable) {
655 		cable->changed = true;
656 		cable->connected = true;
657 		ci_irq(ci->irq, ci);
658 	}
659 	spin_unlock_irqrestore(&ci->lock, flags);
660 	pm_runtime_put_sync(ci->dev);
661 
662 	return 0;
663 }
664 
665 static struct usb_role_switch_desc ci_role_switch = {
666 	.set = ci_usb_role_switch_set,
667 	.get = ci_usb_role_switch_get,
668 };
669 
670 static int ci_get_platdata(struct device *dev,
671 		struct ci_hdrc_platform_data *platdata)
672 {
673 	struct extcon_dev *ext_vbus, *ext_id;
674 	struct ci_hdrc_cable *cable;
675 	int ret;
676 
677 	if (!platdata->phy_mode)
678 		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
679 
680 	if (!platdata->dr_mode)
681 		platdata->dr_mode = usb_get_dr_mode(dev);
682 
683 	if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
684 		platdata->dr_mode = USB_DR_MODE_OTG;
685 
686 	if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
687 		/* Get the vbus regulator */
688 		platdata->reg_vbus = devm_regulator_get_optional(dev, "vbus");
689 		if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
690 			return -EPROBE_DEFER;
691 		} else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
692 			/* no vbus regulator is needed */
693 			platdata->reg_vbus = NULL;
694 		} else if (IS_ERR(platdata->reg_vbus)) {
695 			dev_err(dev, "Getting regulator error: %ld\n",
696 				PTR_ERR(platdata->reg_vbus));
697 			return PTR_ERR(platdata->reg_vbus);
698 		}
699 		/* Get TPL support */
700 		if (!platdata->tpl_support)
701 			platdata->tpl_support =
702 				of_usb_host_tpl_support(dev->of_node);
703 	}
704 
705 	if (platdata->dr_mode == USB_DR_MODE_OTG) {
706 		/* We can support HNP and SRP of OTG 2.0 */
707 		platdata->ci_otg_caps.otg_rev = 0x0200;
708 		platdata->ci_otg_caps.hnp_support = true;
709 		platdata->ci_otg_caps.srp_support = true;
710 
711 		/* Update otg capabilities by DT properties */
712 		ret = of_usb_update_otg_caps(dev->of_node,
713 					&platdata->ci_otg_caps);
714 		if (ret)
715 			return ret;
716 	}
717 
718 	if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
719 		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
720 
721 	of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
722 				     &platdata->phy_clkgate_delay_us);
723 
724 	platdata->itc_setting = 1;
725 
726 	of_property_read_u32(dev->of_node, "itc-setting",
727 					&platdata->itc_setting);
728 
729 	ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
730 				&platdata->ahb_burst_config);
731 	if (!ret) {
732 		platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
733 	} else if (ret != -EINVAL) {
734 		dev_err(dev, "failed to get ahb-burst-config\n");
735 		return ret;
736 	}
737 
738 	ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
739 				&platdata->tx_burst_size);
740 	if (!ret) {
741 		platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
742 	} else if (ret != -EINVAL) {
743 		dev_err(dev, "failed to get tx-burst-size-dword\n");
744 		return ret;
745 	}
746 
747 	ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
748 				&platdata->rx_burst_size);
749 	if (!ret) {
750 		platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
751 	} else if (ret != -EINVAL) {
752 		dev_err(dev, "failed to get rx-burst-size-dword\n");
753 		return ret;
754 	}
755 
756 	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
757 		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
758 
759 	ext_id = ERR_PTR(-ENODEV);
760 	ext_vbus = ERR_PTR(-ENODEV);
761 	if (of_property_read_bool(dev->of_node, "extcon")) {
762 		/* Each one of them is not mandatory */
763 		ext_vbus = extcon_get_edev_by_phandle(dev, 0);
764 		if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
765 			return PTR_ERR(ext_vbus);
766 
767 		ext_id = extcon_get_edev_by_phandle(dev, 1);
768 		if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
769 			return PTR_ERR(ext_id);
770 	}
771 
772 	cable = &platdata->vbus_extcon;
773 	cable->nb.notifier_call = ci_cable_notifier;
774 	cable->edev = ext_vbus;
775 
776 	if (!IS_ERR(ext_vbus)) {
777 		ret = extcon_get_state(cable->edev, EXTCON_USB);
778 		if (ret)
779 			cable->connected = true;
780 		else
781 			cable->connected = false;
782 	}
783 
784 	cable = &platdata->id_extcon;
785 	cable->nb.notifier_call = ci_cable_notifier;
786 	cable->edev = ext_id;
787 
788 	if (!IS_ERR(ext_id)) {
789 		ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
790 		if (ret)
791 			cable->connected = true;
792 		else
793 			cable->connected = false;
794 	}
795 
796 	if (device_property_read_bool(dev, "usb-role-switch"))
797 		ci_role_switch.fwnode = dev->fwnode;
798 
799 	platdata->pctl = devm_pinctrl_get(dev);
800 	if (!IS_ERR(platdata->pctl)) {
801 		struct pinctrl_state *p;
802 
803 		p = pinctrl_lookup_state(platdata->pctl, "default");
804 		if (!IS_ERR(p))
805 			platdata->pins_default = p;
806 
807 		p = pinctrl_lookup_state(platdata->pctl, "host");
808 		if (!IS_ERR(p))
809 			platdata->pins_host = p;
810 
811 		p = pinctrl_lookup_state(platdata->pctl, "device");
812 		if (!IS_ERR(p))
813 			platdata->pins_device = p;
814 	}
815 
816 	return 0;
817 }
818 
819 static int ci_extcon_register(struct ci_hdrc *ci)
820 {
821 	struct ci_hdrc_cable *id, *vbus;
822 	int ret;
823 
824 	id = &ci->platdata->id_extcon;
825 	id->ci = ci;
826 	if (!IS_ERR_OR_NULL(id->edev)) {
827 		ret = devm_extcon_register_notifier(ci->dev, id->edev,
828 						EXTCON_USB_HOST, &id->nb);
829 		if (ret < 0) {
830 			dev_err(ci->dev, "register ID failed\n");
831 			return ret;
832 		}
833 	}
834 
835 	vbus = &ci->platdata->vbus_extcon;
836 	vbus->ci = ci;
837 	if (!IS_ERR_OR_NULL(vbus->edev)) {
838 		ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
839 						EXTCON_USB, &vbus->nb);
840 		if (ret < 0) {
841 			dev_err(ci->dev, "register VBUS failed\n");
842 			return ret;
843 		}
844 	}
845 
846 	return 0;
847 }
848 
849 static DEFINE_IDA(ci_ida);
850 
851 struct platform_device *ci_hdrc_add_device(struct device *dev,
852 			struct resource *res, int nres,
853 			struct ci_hdrc_platform_data *platdata)
854 {
855 	struct platform_device *pdev;
856 	int id, ret;
857 
858 	ret = ci_get_platdata(dev, platdata);
859 	if (ret)
860 		return ERR_PTR(ret);
861 
862 	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
863 	if (id < 0)
864 		return ERR_PTR(id);
865 
866 	pdev = platform_device_alloc("ci_hdrc", id);
867 	if (!pdev) {
868 		ret = -ENOMEM;
869 		goto put_id;
870 	}
871 
872 	pdev->dev.parent = dev;
873 
874 	ret = platform_device_add_resources(pdev, res, nres);
875 	if (ret)
876 		goto err;
877 
878 	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
879 	if (ret)
880 		goto err;
881 
882 	ret = platform_device_add(pdev);
883 	if (ret)
884 		goto err;
885 
886 	return pdev;
887 
888 err:
889 	platform_device_put(pdev);
890 put_id:
891 	ida_simple_remove(&ci_ida, id);
892 	return ERR_PTR(ret);
893 }
894 EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
895 
896 void ci_hdrc_remove_device(struct platform_device *pdev)
897 {
898 	int id = pdev->id;
899 	platform_device_unregister(pdev);
900 	ida_simple_remove(&ci_ida, id);
901 }
902 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
903 
904 static inline void ci_role_destroy(struct ci_hdrc *ci)
905 {
906 	ci_hdrc_gadget_destroy(ci);
907 	ci_hdrc_host_destroy(ci);
908 	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
909 		ci_hdrc_otg_destroy(ci);
910 }
911 
912 static void ci_get_otg_capable(struct ci_hdrc *ci)
913 {
914 	if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
915 		ci->is_otg = false;
916 	else
917 		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
918 				DCCPARAMS_DC | DCCPARAMS_HC)
919 					== (DCCPARAMS_DC | DCCPARAMS_HC));
920 	if (ci->is_otg) {
921 		dev_dbg(ci->dev, "It is OTG capable controller\n");
922 		/* Disable and clear all OTG irq */
923 		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
924 							OTGSC_INT_STATUS_BITS);
925 	}
926 }
927 
928 static ssize_t role_show(struct device *dev, struct device_attribute *attr,
929 			  char *buf)
930 {
931 	struct ci_hdrc *ci = dev_get_drvdata(dev);
932 
933 	if (ci->role != CI_ROLE_END)
934 		return sprintf(buf, "%s\n", ci_role(ci)->name);
935 
936 	return 0;
937 }
938 
939 static ssize_t role_store(struct device *dev,
940 		struct device_attribute *attr, const char *buf, size_t n)
941 {
942 	struct ci_hdrc *ci = dev_get_drvdata(dev);
943 	enum ci_role role;
944 	int ret;
945 
946 	if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) {
947 		dev_warn(dev, "Current configuration is not dual-role, quit\n");
948 		return -EPERM;
949 	}
950 
951 	for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
952 		if (!strncmp(buf, ci->roles[role]->name,
953 			     strlen(ci->roles[role]->name)))
954 			break;
955 
956 	if (role == CI_ROLE_END || role == ci->role)
957 		return -EINVAL;
958 
959 	pm_runtime_get_sync(dev);
960 	disable_irq(ci->irq);
961 	ci_role_stop(ci);
962 	ret = ci_role_start(ci, role);
963 	if (!ret && ci->role == CI_ROLE_GADGET)
964 		ci_handle_vbus_change(ci);
965 	enable_irq(ci->irq);
966 	pm_runtime_put_sync(dev);
967 
968 	return (ret == 0) ? n : ret;
969 }
970 static DEVICE_ATTR_RW(role);
971 
972 static struct attribute *ci_attrs[] = {
973 	&dev_attr_role.attr,
974 	NULL,
975 };
976 ATTRIBUTE_GROUPS(ci);
977 
978 static int ci_hdrc_probe(struct platform_device *pdev)
979 {
980 	struct device	*dev = &pdev->dev;
981 	struct ci_hdrc	*ci;
982 	struct resource	*res;
983 	void __iomem	*base;
984 	int		ret;
985 	enum usb_dr_mode dr_mode;
986 
987 	if (!dev_get_platdata(dev)) {
988 		dev_err(dev, "platform data missing\n");
989 		return -ENODEV;
990 	}
991 
992 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
993 	base = devm_ioremap_resource(dev, res);
994 	if (IS_ERR(base))
995 		return PTR_ERR(base);
996 
997 	ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
998 	if (!ci)
999 		return -ENOMEM;
1000 
1001 	spin_lock_init(&ci->lock);
1002 	ci->dev = dev;
1003 	ci->platdata = dev_get_platdata(dev);
1004 	ci->imx28_write_fix = !!(ci->platdata->flags &
1005 		CI_HDRC_IMX28_WRITE_FIX);
1006 	ci->supports_runtime_pm = !!(ci->platdata->flags &
1007 		CI_HDRC_SUPPORTS_RUNTIME_PM);
1008 	platform_set_drvdata(pdev, ci);
1009 
1010 	ret = hw_device_init(ci, base);
1011 	if (ret < 0) {
1012 		dev_err(dev, "can't initialize hardware\n");
1013 		return -ENODEV;
1014 	}
1015 
1016 	ret = ci_ulpi_init(ci);
1017 	if (ret)
1018 		return ret;
1019 
1020 	if (ci->platdata->phy) {
1021 		ci->phy = ci->platdata->phy;
1022 	} else if (ci->platdata->usb_phy) {
1023 		ci->usb_phy = ci->platdata->usb_phy;
1024 	} else {
1025 		/* Look for a generic PHY first */
1026 		ci->phy = devm_phy_get(dev->parent, "usb-phy");
1027 
1028 		if (PTR_ERR(ci->phy) == -EPROBE_DEFER) {
1029 			ret = -EPROBE_DEFER;
1030 			goto ulpi_exit;
1031 		} else if (IS_ERR(ci->phy)) {
1032 			ci->phy = NULL;
1033 		}
1034 
1035 		/* Look for a legacy USB PHY from device-tree next */
1036 		if (!ci->phy) {
1037 			ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent,
1038 								  "phys", 0);
1039 
1040 			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
1041 				ret = -EPROBE_DEFER;
1042 				goto ulpi_exit;
1043 			} else if (IS_ERR(ci->usb_phy)) {
1044 				ci->usb_phy = NULL;
1045 			}
1046 		}
1047 
1048 		/* Look for any registered legacy USB PHY as last resort */
1049 		if (!ci->phy && !ci->usb_phy) {
1050 			ci->usb_phy = devm_usb_get_phy(dev->parent,
1051 						       USB_PHY_TYPE_USB2);
1052 
1053 			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
1054 				ret = -EPROBE_DEFER;
1055 				goto ulpi_exit;
1056 			} else if (IS_ERR(ci->usb_phy)) {
1057 				ci->usb_phy = NULL;
1058 			}
1059 		}
1060 
1061 		/* No USB PHY was found in the end */
1062 		if (!ci->phy && !ci->usb_phy) {
1063 			ret = -ENXIO;
1064 			goto ulpi_exit;
1065 		}
1066 	}
1067 
1068 	ret = ci_usb_phy_init(ci);
1069 	if (ret) {
1070 		dev_err(dev, "unable to init phy: %d\n", ret);
1071 		return ret;
1072 	}
1073 
1074 	ci->hw_bank.phys = res->start;
1075 
1076 	ci->irq = platform_get_irq(pdev, 0);
1077 	if (ci->irq < 0) {
1078 		ret = ci->irq;
1079 		goto deinit_phy;
1080 	}
1081 
1082 	ci_get_otg_capable(ci);
1083 
1084 	dr_mode = ci->platdata->dr_mode;
1085 	/* initialize role(s) before the interrupt is requested */
1086 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
1087 		ret = ci_hdrc_host_init(ci);
1088 		if (ret) {
1089 			if (ret == -ENXIO)
1090 				dev_info(dev, "doesn't support host\n");
1091 			else
1092 				goto deinit_phy;
1093 		}
1094 	}
1095 
1096 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
1097 		ret = ci_hdrc_gadget_init(ci);
1098 		if (ret) {
1099 			if (ret == -ENXIO)
1100 				dev_info(dev, "doesn't support gadget\n");
1101 			else
1102 				goto deinit_host;
1103 		}
1104 	}
1105 
1106 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
1107 		dev_err(dev, "no supported roles\n");
1108 		ret = -ENODEV;
1109 		goto deinit_gadget;
1110 	}
1111 
1112 	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
1113 		ret = ci_hdrc_otg_init(ci);
1114 		if (ret) {
1115 			dev_err(dev, "init otg fails, ret = %d\n", ret);
1116 			goto deinit_gadget;
1117 		}
1118 	}
1119 
1120 	if (ci_role_switch.fwnode) {
1121 		ci->role_switch = usb_role_switch_register(dev,
1122 					&ci_role_switch);
1123 		if (IS_ERR(ci->role_switch)) {
1124 			ret = PTR_ERR(ci->role_switch);
1125 			goto deinit_otg;
1126 		}
1127 	}
1128 
1129 	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
1130 		if (ci->is_otg) {
1131 			ci->role = ci_otg_role(ci);
1132 			/* Enable ID change irq */
1133 			hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1134 		} else {
1135 			/*
1136 			 * If the controller is not OTG capable, but support
1137 			 * role switch, the defalt role is gadget, and the
1138 			 * user can switch it through debugfs.
1139 			 */
1140 			ci->role = CI_ROLE_GADGET;
1141 		}
1142 	} else {
1143 		ci->role = ci->roles[CI_ROLE_HOST]
1144 			? CI_ROLE_HOST
1145 			: CI_ROLE_GADGET;
1146 	}
1147 
1148 	if (!ci_otg_is_fsm_mode(ci)) {
1149 		/* only update vbus status for peripheral */
1150 		if (ci->role == CI_ROLE_GADGET)
1151 			ci_handle_vbus_change(ci);
1152 
1153 		ret = ci_role_start(ci, ci->role);
1154 		if (ret) {
1155 			dev_err(dev, "can't start %s role\n",
1156 						ci_role(ci)->name);
1157 			goto stop;
1158 		}
1159 	}
1160 
1161 	ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1162 			ci->platdata->name, ci);
1163 	if (ret)
1164 		goto stop;
1165 
1166 	ret = ci_extcon_register(ci);
1167 	if (ret)
1168 		goto stop;
1169 
1170 	if (ci->supports_runtime_pm) {
1171 		pm_runtime_set_active(&pdev->dev);
1172 		pm_runtime_enable(&pdev->dev);
1173 		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1174 		pm_runtime_mark_last_busy(ci->dev);
1175 		pm_runtime_use_autosuspend(&pdev->dev);
1176 	}
1177 
1178 	if (ci_otg_is_fsm_mode(ci))
1179 		ci_hdrc_otg_fsm_start(ci);
1180 
1181 	device_set_wakeup_capable(&pdev->dev, true);
1182 	dbg_create_files(ci);
1183 
1184 	return 0;
1185 
1186 stop:
1187 	if (ci->role_switch)
1188 		usb_role_switch_unregister(ci->role_switch);
1189 deinit_otg:
1190 	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
1191 		ci_hdrc_otg_destroy(ci);
1192 deinit_gadget:
1193 	ci_hdrc_gadget_destroy(ci);
1194 deinit_host:
1195 	ci_hdrc_host_destroy(ci);
1196 deinit_phy:
1197 	ci_usb_phy_exit(ci);
1198 ulpi_exit:
1199 	ci_ulpi_exit(ci);
1200 
1201 	return ret;
1202 }
1203 
1204 static int ci_hdrc_remove(struct platform_device *pdev)
1205 {
1206 	struct ci_hdrc *ci = platform_get_drvdata(pdev);
1207 
1208 	if (ci->role_switch)
1209 		usb_role_switch_unregister(ci->role_switch);
1210 
1211 	if (ci->supports_runtime_pm) {
1212 		pm_runtime_get_sync(&pdev->dev);
1213 		pm_runtime_disable(&pdev->dev);
1214 		pm_runtime_put_noidle(&pdev->dev);
1215 	}
1216 
1217 	dbg_remove_files(ci);
1218 	ci_role_destroy(ci);
1219 	ci_hdrc_enter_lpm(ci, true);
1220 	ci_usb_phy_exit(ci);
1221 	ci_ulpi_exit(ci);
1222 
1223 	return 0;
1224 }
1225 
1226 #ifdef CONFIG_PM
1227 /* Prepare wakeup by SRP before suspend */
1228 static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1229 {
1230 	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1231 				!hw_read_otgsc(ci, OTGSC_ID)) {
1232 		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1233 								PORTSC_PP);
1234 		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1235 								PORTSC_WKCN);
1236 	}
1237 }
1238 
1239 /* Handle SRP when wakeup by data pulse */
1240 static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1241 {
1242 	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1243 		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1244 		if (!hw_read_otgsc(ci, OTGSC_ID)) {
1245 			ci->fsm.a_srp_det = 1;
1246 			ci->fsm.a_bus_drop = 0;
1247 		} else {
1248 			ci->fsm.id = 1;
1249 		}
1250 		ci_otg_queue_work(ci);
1251 	}
1252 }
1253 
1254 static void ci_controller_suspend(struct ci_hdrc *ci)
1255 {
1256 	disable_irq(ci->irq);
1257 	ci_hdrc_enter_lpm(ci, true);
1258 	if (ci->platdata->phy_clkgate_delay_us)
1259 		usleep_range(ci->platdata->phy_clkgate_delay_us,
1260 			     ci->platdata->phy_clkgate_delay_us + 50);
1261 	usb_phy_set_suspend(ci->usb_phy, 1);
1262 	ci->in_lpm = true;
1263 	enable_irq(ci->irq);
1264 }
1265 
1266 static int ci_controller_resume(struct device *dev)
1267 {
1268 	struct ci_hdrc *ci = dev_get_drvdata(dev);
1269 	int ret;
1270 
1271 	dev_dbg(dev, "at %s\n", __func__);
1272 
1273 	if (!ci->in_lpm) {
1274 		WARN_ON(1);
1275 		return 0;
1276 	}
1277 
1278 	ci_hdrc_enter_lpm(ci, false);
1279 
1280 	ret = ci_ulpi_resume(ci);
1281 	if (ret)
1282 		return ret;
1283 
1284 	if (ci->usb_phy) {
1285 		usb_phy_set_suspend(ci->usb_phy, 0);
1286 		usb_phy_set_wakeup(ci->usb_phy, false);
1287 		hw_wait_phy_stable();
1288 	}
1289 
1290 	ci->in_lpm = false;
1291 	if (ci->wakeup_int) {
1292 		ci->wakeup_int = false;
1293 		pm_runtime_mark_last_busy(ci->dev);
1294 		pm_runtime_put_autosuspend(ci->dev);
1295 		enable_irq(ci->irq);
1296 		if (ci_otg_is_fsm_mode(ci))
1297 			ci_otg_fsm_wakeup_by_srp(ci);
1298 	}
1299 
1300 	return 0;
1301 }
1302 
1303 #ifdef CONFIG_PM_SLEEP
1304 static int ci_suspend(struct device *dev)
1305 {
1306 	struct ci_hdrc *ci = dev_get_drvdata(dev);
1307 
1308 	if (ci->wq)
1309 		flush_workqueue(ci->wq);
1310 	/*
1311 	 * Controller needs to be active during suspend, otherwise the core
1312 	 * may run resume when the parent is at suspend if other driver's
1313 	 * suspend fails, it occurs before parent's suspend has not started,
1314 	 * but the core suspend has finished.
1315 	 */
1316 	if (ci->in_lpm)
1317 		pm_runtime_resume(dev);
1318 
1319 	if (ci->in_lpm) {
1320 		WARN_ON(1);
1321 		return 0;
1322 	}
1323 
1324 	if (device_may_wakeup(dev)) {
1325 		if (ci_otg_is_fsm_mode(ci))
1326 			ci_otg_fsm_suspend_for_srp(ci);
1327 
1328 		usb_phy_set_wakeup(ci->usb_phy, true);
1329 		enable_irq_wake(ci->irq);
1330 	}
1331 
1332 	ci_controller_suspend(ci);
1333 
1334 	return 0;
1335 }
1336 
1337 static int ci_resume(struct device *dev)
1338 {
1339 	struct ci_hdrc *ci = dev_get_drvdata(dev);
1340 	int ret;
1341 
1342 	if (device_may_wakeup(dev))
1343 		disable_irq_wake(ci->irq);
1344 
1345 	ret = ci_controller_resume(dev);
1346 	if (ret)
1347 		return ret;
1348 
1349 	if (ci->supports_runtime_pm) {
1350 		pm_runtime_disable(dev);
1351 		pm_runtime_set_active(dev);
1352 		pm_runtime_enable(dev);
1353 	}
1354 
1355 	return ret;
1356 }
1357 #endif /* CONFIG_PM_SLEEP */
1358 
1359 static int ci_runtime_suspend(struct device *dev)
1360 {
1361 	struct ci_hdrc *ci = dev_get_drvdata(dev);
1362 
1363 	dev_dbg(dev, "at %s\n", __func__);
1364 
1365 	if (ci->in_lpm) {
1366 		WARN_ON(1);
1367 		return 0;
1368 	}
1369 
1370 	if (ci_otg_is_fsm_mode(ci))
1371 		ci_otg_fsm_suspend_for_srp(ci);
1372 
1373 	usb_phy_set_wakeup(ci->usb_phy, true);
1374 	ci_controller_suspend(ci);
1375 
1376 	return 0;
1377 }
1378 
1379 static int ci_runtime_resume(struct device *dev)
1380 {
1381 	return ci_controller_resume(dev);
1382 }
1383 
1384 #endif /* CONFIG_PM */
1385 static const struct dev_pm_ops ci_pm_ops = {
1386 	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1387 	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1388 };
1389 
1390 static struct platform_driver ci_hdrc_driver = {
1391 	.probe	= ci_hdrc_probe,
1392 	.remove	= ci_hdrc_remove,
1393 	.driver	= {
1394 		.name	= "ci_hdrc",
1395 		.pm	= &ci_pm_ops,
1396 		.dev_groups = ci_groups,
1397 	},
1398 };
1399 
1400 static int __init ci_hdrc_platform_register(void)
1401 {
1402 	ci_hdrc_host_driver_init();
1403 	return platform_driver_register(&ci_hdrc_driver);
1404 }
1405 module_init(ci_hdrc_platform_register);
1406 
1407 static void __exit ci_hdrc_platform_unregister(void)
1408 {
1409 	platform_driver_unregister(&ci_hdrc_driver);
1410 }
1411 module_exit(ci_hdrc_platform_unregister);
1412 
1413 MODULE_ALIAS("platform:ci_hdrc");
1414 MODULE_LICENSE("GPL v2");
1415 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1416 MODULE_DESCRIPTION("ChipIdea HDRC Driver");
1417