1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2016, NVIDIA Corporation
4  */
5 
6 #include <linux/clk.h>
7 #include <linux/io.h>
8 #include <linux/module.h>
9 #include <linux/of.h>
10 #include <linux/platform_device.h>
11 #include <linux/pm_runtime.h>
12 #include <linux/reset.h>
13 
14 #include <linux/usb.h>
15 #include <linux/usb/chipidea.h>
16 #include <linux/usb/hcd.h>
17 #include <linux/usb/of.h>
18 #include <linux/usb/phy.h>
19 
20 #include <soc/tegra/common.h>
21 
22 #include "../host/ehci.h"
23 
24 #include "ci.h"
25 
26 struct tegra_usb {
27 	struct ci_hdrc_platform_data data;
28 	struct platform_device *dev;
29 
30 	const struct tegra_usb_soc_info *soc;
31 	struct usb_phy *phy;
32 	struct clk *clk;
33 
34 	bool needs_double_reset;
35 };
36 
37 struct tegra_usb_soc_info {
38 	unsigned long flags;
39 	unsigned int txfifothresh;
40 	enum usb_dr_mode dr_mode;
41 };
42 
43 static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
44 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
45 		 CI_HDRC_OVERRIDE_PHY_CONTROL |
46 		 CI_HDRC_SUPPORTS_RUNTIME_PM,
47 	.dr_mode = USB_DR_MODE_HOST,
48 	.txfifothresh = 10,
49 };
50 
51 static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
52 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
53 		 CI_HDRC_OVERRIDE_PHY_CONTROL |
54 		 CI_HDRC_SUPPORTS_RUNTIME_PM,
55 	.dr_mode = USB_DR_MODE_HOST,
56 	.txfifothresh = 16,
57 };
58 
59 static const struct tegra_usb_soc_info tegra20_udc_soc_info = {
60 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
61 		 CI_HDRC_OVERRIDE_PHY_CONTROL |
62 		 CI_HDRC_SUPPORTS_RUNTIME_PM,
63 	.dr_mode = USB_DR_MODE_UNKNOWN,
64 	.txfifothresh = 10,
65 };
66 
67 static const struct tegra_usb_soc_info tegra30_udc_soc_info = {
68 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
69 		 CI_HDRC_OVERRIDE_PHY_CONTROL |
70 		 CI_HDRC_SUPPORTS_RUNTIME_PM,
71 	.dr_mode = USB_DR_MODE_UNKNOWN,
72 	.txfifothresh = 16,
73 };
74 
75 static const struct of_device_id tegra_usb_of_match[] = {
76 	{
77 		.compatible = "nvidia,tegra20-ehci",
78 		.data = &tegra20_ehci_soc_info,
79 	}, {
80 		.compatible = "nvidia,tegra30-ehci",
81 		.data = &tegra30_ehci_soc_info,
82 	}, {
83 		.compatible = "nvidia,tegra20-udc",
84 		.data = &tegra20_udc_soc_info,
85 	}, {
86 		.compatible = "nvidia,tegra30-udc",
87 		.data = &tegra30_udc_soc_info,
88 	}, {
89 		.compatible = "nvidia,tegra114-udc",
90 		.data = &tegra30_udc_soc_info,
91 	}, {
92 		.compatible = "nvidia,tegra124-udc",
93 		.data = &tegra30_udc_soc_info,
94 	}, {
95 		/* sentinel */
96 	}
97 };
98 MODULE_DEVICE_TABLE(of, tegra_usb_of_match);
99 
100 static int tegra_usb_reset_controller(struct device *dev)
101 {
102 	struct reset_control *rst, *rst_utmi;
103 	struct device_node *phy_np;
104 	int err;
105 
106 	rst = devm_reset_control_get_shared(dev, "usb");
107 	if (IS_ERR(rst)) {
108 		dev_err(dev, "can't get ehci reset: %pe\n", rst);
109 		return PTR_ERR(rst);
110 	}
111 
112 	phy_np = of_parse_phandle(dev->of_node, "nvidia,phy", 0);
113 	if (!phy_np)
114 		return -ENOENT;
115 
116 	/*
117 	 * The 1st USB controller contains some UTMI pad registers that are
118 	 * global for all the controllers on the chip. Those registers are
119 	 * also cleared when reset is asserted to the 1st controller.
120 	 */
121 	rst_utmi = of_reset_control_get_shared(phy_np, "utmi-pads");
122 	if (IS_ERR(rst_utmi)) {
123 		dev_warn(dev, "can't get utmi-pads reset from the PHY\n");
124 		dev_warn(dev, "continuing, but please update your DT\n");
125 	} else {
126 		/*
127 		 * PHY driver performs UTMI-pads reset in a case of a
128 		 * non-legacy DT.
129 		 */
130 		reset_control_put(rst_utmi);
131 	}
132 
133 	of_node_put(phy_np);
134 
135 	/* reset control is shared, hence initialize it first */
136 	err = reset_control_deassert(rst);
137 	if (err)
138 		return err;
139 
140 	err = reset_control_assert(rst);
141 	if (err)
142 		return err;
143 
144 	udelay(1);
145 
146 	err = reset_control_deassert(rst);
147 	if (err)
148 		return err;
149 
150 	return 0;
151 }
152 
153 static int tegra_usb_notify_event(struct ci_hdrc *ci, unsigned int event)
154 {
155 	struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
156 	struct ehci_hcd *ehci;
157 
158 	switch (event) {
159 	case CI_HDRC_CONTROLLER_RESET_EVENT:
160 		if (ci->hcd) {
161 			ehci = hcd_to_ehci(ci->hcd);
162 			ehci->has_tdi_phy_lpm = false;
163 			ehci_writel(ehci, usb->soc->txfifothresh << 16,
164 				    &ehci->regs->txfill_tuning);
165 		}
166 		break;
167 	}
168 
169 	return 0;
170 }
171 
172 static int tegra_usb_internal_port_reset(struct ehci_hcd *ehci,
173 					 u32 __iomem *portsc_reg,
174 					 unsigned long *flags)
175 {
176 	u32 saved_usbintr, temp;
177 	unsigned int i, tries;
178 	int retval = 0;
179 
180 	saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
181 	/* disable USB interrupt */
182 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
183 	spin_unlock_irqrestore(&ehci->lock, *flags);
184 
185 	/*
186 	 * Here we have to do Port Reset at most twice for
187 	 * Port Enable bit to be set.
188 	 */
189 	for (i = 0; i < 2; i++) {
190 		temp = ehci_readl(ehci, portsc_reg);
191 		temp |= PORT_RESET;
192 		ehci_writel(ehci, temp, portsc_reg);
193 		fsleep(10000);
194 		temp &= ~PORT_RESET;
195 		ehci_writel(ehci, temp, portsc_reg);
196 		fsleep(1000);
197 		tries = 100;
198 		do {
199 			fsleep(1000);
200 			/*
201 			 * Up to this point, Port Enable bit is
202 			 * expected to be set after 2 ms waiting.
203 			 * USB1 usually takes extra 45 ms, for safety,
204 			 * we take 100 ms as timeout.
205 			 */
206 			temp = ehci_readl(ehci, portsc_reg);
207 		} while (!(temp & PORT_PE) && tries--);
208 		if (temp & PORT_PE)
209 			break;
210 	}
211 	if (i == 2)
212 		retval = -ETIMEDOUT;
213 
214 	/*
215 	 * Clear Connect Status Change bit if it's set.
216 	 * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
217 	 */
218 	if (temp & PORT_CSC)
219 		ehci_writel(ehci, PORT_CSC, portsc_reg);
220 
221 	/*
222 	 * Write to clear any interrupt status bits that might be set
223 	 * during port reset.
224 	 */
225 	temp = ehci_readl(ehci, &ehci->regs->status);
226 	ehci_writel(ehci, temp, &ehci->regs->status);
227 
228 	/* restore original interrupt-enable bits */
229 	spin_lock_irqsave(&ehci->lock, *flags);
230 	ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
231 
232 	return retval;
233 }
234 
235 static int tegra_ehci_hub_control(struct ci_hdrc *ci, u16 typeReq, u16 wValue,
236 				  u16 wIndex, char *buf, u16 wLength,
237 				  bool *done, unsigned long *flags)
238 {
239 	struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
240 	struct ehci_hcd *ehci = hcd_to_ehci(ci->hcd);
241 	u32 __iomem *status_reg;
242 	int retval = 0;
243 
244 	status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
245 
246 	switch (typeReq) {
247 	case SetPortFeature:
248 		if (wValue != USB_PORT_FEAT_RESET || !usb->needs_double_reset)
249 			break;
250 
251 		/* for USB1 port we need to issue Port Reset twice internally */
252 		retval = tegra_usb_internal_port_reset(ehci, status_reg, flags);
253 		*done  = true;
254 		break;
255 	}
256 
257 	return retval;
258 }
259 
260 static void tegra_usb_enter_lpm(struct ci_hdrc *ci, bool enable)
261 {
262 	/*
263 	 * Touching any register which belongs to AHB clock domain will
264 	 * hang CPU if USB controller is put into low power mode because
265 	 * AHB USB clock is gated on Tegra in the LPM.
266 	 *
267 	 * Tegra PHY has a separate register for checking the clock status
268 	 * and usb_phy_set_suspend() takes care of gating/ungating the clocks
269 	 * and restoring the PHY state on Tegra. Hence DEVLC/PORTSC registers
270 	 * shouldn't be touched directly by the CI driver.
271 	 */
272 	usb_phy_set_suspend(ci->usb_phy, enable);
273 }
274 
275 static int tegra_usb_probe(struct platform_device *pdev)
276 {
277 	const struct tegra_usb_soc_info *soc;
278 	struct tegra_usb *usb;
279 	int err;
280 
281 	usb = devm_kzalloc(&pdev->dev, sizeof(*usb), GFP_KERNEL);
282 	if (!usb)
283 		return -ENOMEM;
284 
285 	platform_set_drvdata(pdev, usb);
286 
287 	soc = of_device_get_match_data(&pdev->dev);
288 	if (!soc) {
289 		dev_err(&pdev->dev, "failed to match OF data\n");
290 		return -EINVAL;
291 	}
292 
293 	usb->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
294 	if (IS_ERR(usb->phy))
295 		return dev_err_probe(&pdev->dev, PTR_ERR(usb->phy),
296 				     "failed to get PHY\n");
297 
298 	usb->clk = devm_clk_get(&pdev->dev, NULL);
299 	if (IS_ERR(usb->clk)) {
300 		err = PTR_ERR(usb->clk);
301 		dev_err(&pdev->dev, "failed to get clock: %d\n", err);
302 		return err;
303 	}
304 
305 	err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
306 	if (err)
307 		return err;
308 
309 	pm_runtime_enable(&pdev->dev);
310 	err = pm_runtime_resume_and_get(&pdev->dev);
311 	if (err)
312 		return err;
313 
314 	if (device_property_present(&pdev->dev, "nvidia,needs-double-reset"))
315 		usb->needs_double_reset = true;
316 
317 	err = tegra_usb_reset_controller(&pdev->dev);
318 	if (err) {
319 		dev_err(&pdev->dev, "failed to reset controller: %d\n", err);
320 		goto fail_power_off;
321 	}
322 
323 	/*
324 	 * USB controller registers shouldn't be touched before PHY is
325 	 * initialized, otherwise CPU will hang because clocks are gated.
326 	 * PHY driver controls gating of internal USB clocks on Tegra.
327 	 */
328 	err = usb_phy_init(usb->phy);
329 	if (err)
330 		goto fail_power_off;
331 
332 	/* setup and register ChipIdea HDRC device */
333 	usb->soc = soc;
334 	usb->data.name = "tegra-usb";
335 	usb->data.flags = soc->flags;
336 	usb->data.usb_phy = usb->phy;
337 	usb->data.dr_mode = soc->dr_mode;
338 	usb->data.capoffset = DEF_CAPOFFSET;
339 	usb->data.enter_lpm = tegra_usb_enter_lpm;
340 	usb->data.hub_control = tegra_ehci_hub_control;
341 	usb->data.notify_event = tegra_usb_notify_event;
342 
343 	/* Tegra PHY driver currently doesn't support LPM for ULPI */
344 	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
345 		usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
346 
347 	usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource,
348 				      pdev->num_resources, &usb->data);
349 	if (IS_ERR(usb->dev)) {
350 		err = PTR_ERR(usb->dev);
351 		dev_err(&pdev->dev, "failed to add HDRC device: %d\n", err);
352 		goto phy_shutdown;
353 	}
354 
355 	return 0;
356 
357 phy_shutdown:
358 	usb_phy_shutdown(usb->phy);
359 fail_power_off:
360 	pm_runtime_put_sync_suspend(&pdev->dev);
361 	pm_runtime_force_suspend(&pdev->dev);
362 
363 	return err;
364 }
365 
366 static void tegra_usb_remove(struct platform_device *pdev)
367 {
368 	struct tegra_usb *usb = platform_get_drvdata(pdev);
369 
370 	ci_hdrc_remove_device(usb->dev);
371 	usb_phy_shutdown(usb->phy);
372 
373 	pm_runtime_put_sync_suspend(&pdev->dev);
374 	pm_runtime_force_suspend(&pdev->dev);
375 }
376 
377 static int __maybe_unused tegra_usb_runtime_resume(struct device *dev)
378 {
379 	struct tegra_usb *usb = dev_get_drvdata(dev);
380 	int err;
381 
382 	err = clk_prepare_enable(usb->clk);
383 	if (err < 0) {
384 		dev_err(dev, "failed to enable clock: %d\n", err);
385 		return err;
386 	}
387 
388 	return 0;
389 }
390 
391 static int __maybe_unused tegra_usb_runtime_suspend(struct device *dev)
392 {
393 	struct tegra_usb *usb = dev_get_drvdata(dev);
394 
395 	clk_disable_unprepare(usb->clk);
396 
397 	return 0;
398 }
399 
400 static const struct dev_pm_ops tegra_usb_pm = {
401 	SET_RUNTIME_PM_OPS(tegra_usb_runtime_suspend, tegra_usb_runtime_resume,
402 			   NULL)
403 };
404 
405 static struct platform_driver tegra_usb_driver = {
406 	.driver = {
407 		.name = "tegra-usb",
408 		.of_match_table = tegra_usb_of_match,
409 		.pm = &tegra_usb_pm,
410 	},
411 	.probe = tegra_usb_probe,
412 	.remove_new = tegra_usb_remove,
413 };
414 module_platform_driver(tegra_usb_driver);
415 
416 MODULE_DESCRIPTION("NVIDIA Tegra USB driver");
417 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
418 MODULE_LICENSE("GPL v2");
419