xref: /openbmc/linux/drivers/usb/chipidea/ci.h (revision d623f60d) 
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * ci.h - common structures, functions, and macros of the ChipIdea driver
4  *
5  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
6  *
7  * Author: David Lopo
8  */
9 
10 #ifndef __DRIVERS_USB_CHIPIDEA_CI_H
11 #define __DRIVERS_USB_CHIPIDEA_CI_H
12 
13 #include <linux/list.h>
14 #include <linux/irqreturn.h>
15 #include <linux/usb.h>
16 #include <linux/usb/gadget.h>
17 #include <linux/usb/otg-fsm.h>
18 #include <linux/usb/otg.h>
19 #include <linux/ulpi/interface.h>
20 
21 /******************************************************************************
22  * DEFINE
23  *****************************************************************************/
24 #define TD_PAGE_COUNT      5
25 #define CI_HDRC_PAGE_SIZE  4096ul /* page size for TD's */
26 #define ENDPT_MAX          32
27 
28 /******************************************************************************
29  * REGISTERS
30  *****************************************************************************/
31 /* Identification Registers */
32 #define ID_ID				0x0
33 #define ID_HWGENERAL			0x4
34 #define ID_HWHOST			0x8
35 #define ID_HWDEVICE			0xc
36 #define ID_HWTXBUF			0x10
37 #define ID_HWRXBUF			0x14
38 #define ID_SBUSCFG			0x90
39 
40 /* register indices */
41 enum ci_hw_regs {
42 	CAP_CAPLENGTH,
43 	CAP_HCCPARAMS,
44 	CAP_DCCPARAMS,
45 	CAP_TESTMODE,
46 	CAP_LAST = CAP_TESTMODE,
47 	OP_USBCMD,
48 	OP_USBSTS,
49 	OP_USBINTR,
50 	OP_DEVICEADDR,
51 	OP_ENDPTLISTADDR,
52 	OP_TTCTRL,
53 	OP_BURSTSIZE,
54 	OP_ULPI_VIEWPORT,
55 	OP_PORTSC,
56 	OP_DEVLC,
57 	OP_OTGSC,
58 	OP_USBMODE,
59 	OP_ENDPTSETUPSTAT,
60 	OP_ENDPTPRIME,
61 	OP_ENDPTFLUSH,
62 	OP_ENDPTSTAT,
63 	OP_ENDPTCOMPLETE,
64 	OP_ENDPTCTRL,
65 	/* endptctrl1..15 follow */
66 	OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2,
67 };
68 
69 /******************************************************************************
70  * STRUCTURES
71  *****************************************************************************/
72 /**
73  * struct ci_hw_ep - endpoint representation
74  * @ep: endpoint structure for gadget drivers
75  * @dir: endpoint direction (TX/RX)
76  * @num: endpoint number
77  * @type: endpoint type
78  * @name: string description of the endpoint
79  * @qh: queue head for this endpoint
80  * @wedge: is the endpoint wedged
81  * @ci: pointer to the controller
82  * @lock: pointer to controller's spinlock
83  * @td_pool: pointer to controller's TD pool
84  */
85 struct ci_hw_ep {
86 	struct usb_ep				ep;
87 	u8					dir;
88 	u8					num;
89 	u8					type;
90 	char					name[16];
91 	struct {
92 		struct list_head	queue;
93 		struct ci_hw_qh		*ptr;
94 		dma_addr_t		dma;
95 	}					qh;
96 	int					wedge;
97 
98 	/* global resources */
99 	struct ci_hdrc				*ci;
100 	spinlock_t				*lock;
101 	struct dma_pool				*td_pool;
102 	struct td_node				*pending_td;
103 };
104 
105 enum ci_role {
106 	CI_ROLE_HOST = 0,
107 	CI_ROLE_GADGET,
108 	CI_ROLE_END,
109 };
110 
111 enum ci_revision {
112 	CI_REVISION_1X = 10,	/* Revision 1.x */
113 	CI_REVISION_20 = 20, /* Revision 2.0 */
114 	CI_REVISION_21, /* Revision 2.1 */
115 	CI_REVISION_22, /* Revision 2.2 */
116 	CI_REVISION_23, /* Revision 2.3 */
117 	CI_REVISION_24, /* Revision 2.4 */
118 	CI_REVISION_25, /* Revision 2.5 */
119 	CI_REVISION_25_PLUS, /* Revision above than 2.5 */
120 	CI_REVISION_UNKNOWN = 99, /* Unknown Revision */
121 };
122 
123 /**
124  * struct ci_role_driver - host/gadget role driver
125  * @start: start this role
126  * @stop: stop this role
127  * @irq: irq handler for this role
128  * @name: role name string (host/gadget)
129  */
130 struct ci_role_driver {
131 	int		(*start)(struct ci_hdrc *);
132 	void		(*stop)(struct ci_hdrc *);
133 	irqreturn_t	(*irq)(struct ci_hdrc *);
134 	const char	*name;
135 };
136 
137 /**
138  * struct hw_bank - hardware register mapping representation
139  * @lpm: set if the device is LPM capable
140  * @phys: physical address of the controller's registers
141  * @abs: absolute address of the beginning of register window
142  * @cap: capability registers
143  * @op: operational registers
144  * @size: size of the register window
145  * @regmap: register lookup table
146  */
147 struct hw_bank {
148 	unsigned	lpm;
149 	resource_size_t	phys;
150 	void __iomem	*abs;
151 	void __iomem	*cap;
152 	void __iomem	*op;
153 	size_t		size;
154 	void __iomem	*regmap[OP_LAST + 1];
155 };
156 
157 /**
158  * struct ci_hdrc - chipidea device representation
159  * @dev: pointer to parent device
160  * @lock: access synchronization
161  * @hw_bank: hardware register mapping
162  * @irq: IRQ number
163  * @roles: array of supported roles for this controller
164  * @role: current role
165  * @is_otg: if the device is otg-capable
166  * @fsm: otg finite state machine
167  * @otg_fsm_hrtimer: hrtimer for otg fsm timers
168  * @hr_timeouts: time out list for active otg fsm timers
169  * @enabled_otg_timer_bits: bits of enabled otg timers
170  * @next_otg_timer: next nearest enabled timer to be expired
171  * @work: work for role changing
172  * @wq: workqueue thread
173  * @qh_pool: allocation pool for queue heads
174  * @td_pool: allocation pool for transfer descriptors
175  * @gadget: device side representation for peripheral controller
176  * @driver: gadget driver
177  * @resume_state: save the state of gadget suspend from
178  * @hw_ep_max: total number of endpoints supported by hardware
179  * @ci_hw_ep: array of endpoints
180  * @ep0_dir: ep0 direction
181  * @ep0out: pointer to ep0 OUT endpoint
182  * @ep0in: pointer to ep0 IN endpoint
183  * @status: ep0 status request
184  * @setaddr: if we should set the address on status completion
185  * @address: usb address received from the host
186  * @remote_wakeup: host-enabled remote wakeup
187  * @suspended: suspended by host
188  * @test_mode: the selected test mode
189  * @platdata: platform specific information supplied by parent device
190  * @vbus_active: is VBUS active
191  * @ulpi: pointer to ULPI device, if any
192  * @ulpi_ops: ULPI read/write ops for this device
193  * @phy: pointer to PHY, if any
194  * @usb_phy: pointer to USB PHY, if any and if using the USB PHY framework
195  * @hcd: pointer to usb_hcd for ehci host driver
196  * @debugfs: root dentry for this controller in debugfs
197  * @id_event: indicates there is an id event, and handled at ci_otg_work
198  * @b_sess_valid_event: indicates there is a vbus event, and handled
199  * at ci_otg_work
200  * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
201  * @supports_runtime_pm: if runtime pm is supported
202  * @in_lpm: if the core in low power mode
203  * @wakeup_int: if wakeup interrupt occur
204  * @rev: The revision number for controller
205  */
206 struct ci_hdrc {
207 	struct device			*dev;
208 	spinlock_t			lock;
209 	struct hw_bank			hw_bank;
210 	int				irq;
211 	struct ci_role_driver		*roles[CI_ROLE_END];
212 	enum ci_role			role;
213 	bool				is_otg;
214 	struct usb_otg			otg;
215 	struct otg_fsm			fsm;
216 	struct hrtimer			otg_fsm_hrtimer;
217 	ktime_t				hr_timeouts[NUM_OTG_FSM_TIMERS];
218 	unsigned			enabled_otg_timer_bits;
219 	enum otg_fsm_timer		next_otg_timer;
220 	struct work_struct		work;
221 	struct workqueue_struct		*wq;
222 
223 	struct dma_pool			*qh_pool;
224 	struct dma_pool			*td_pool;
225 
226 	struct usb_gadget		gadget;
227 	struct usb_gadget_driver	*driver;
228 	enum usb_device_state		resume_state;
229 	unsigned			hw_ep_max;
230 	struct ci_hw_ep			ci_hw_ep[ENDPT_MAX];
231 	u32				ep0_dir;
232 	struct ci_hw_ep			*ep0out, *ep0in;
233 
234 	struct usb_request		*status;
235 	bool				setaddr;
236 	u8				address;
237 	u8				remote_wakeup;
238 	u8				suspended;
239 	u8				test_mode;
240 
241 	struct ci_hdrc_platform_data	*platdata;
242 	int				vbus_active;
243 #ifdef CONFIG_USB_CHIPIDEA_ULPI
244 	struct ulpi			*ulpi;
245 	struct ulpi_ops 		ulpi_ops;
246 #endif
247 	struct phy			*phy;
248 	/* old usb_phy interface */
249 	struct usb_phy			*usb_phy;
250 	struct usb_hcd			*hcd;
251 	struct dentry			*debugfs;
252 	bool				id_event;
253 	bool				b_sess_valid_event;
254 	bool				imx28_write_fix;
255 	bool				supports_runtime_pm;
256 	bool				in_lpm;
257 	bool				wakeup_int;
258 	enum ci_revision		rev;
259 };
260 
261 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
262 {
263 	BUG_ON(ci->role >= CI_ROLE_END || !ci->roles[ci->role]);
264 	return ci->roles[ci->role];
265 }
266 
267 static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
268 {
269 	int ret;
270 
271 	if (role >= CI_ROLE_END)
272 		return -EINVAL;
273 
274 	if (!ci->roles[role])
275 		return -ENXIO;
276 
277 	ret = ci->roles[role]->start(ci);
278 	if (!ret)
279 		ci->role = role;
280 	return ret;
281 }
282 
283 static inline void ci_role_stop(struct ci_hdrc *ci)
284 {
285 	enum ci_role role = ci->role;
286 
287 	if (role == CI_ROLE_END)
288 		return;
289 
290 	ci->role = CI_ROLE_END;
291 
292 	ci->roles[role]->stop(ci);
293 }
294 
295 /**
296  * hw_read_id_reg: reads from a identification register
297  * @ci: the controller
298  * @offset: offset from the beginning of identification registers region
299  * @mask: bitfield mask
300  *
301  * This function returns register contents
302  */
303 static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask)
304 {
305 	return ioread32(ci->hw_bank.abs + offset) & mask;
306 }
307 
308 /**
309  * hw_write_id_reg: writes to a identification register
310  * @ci: the controller
311  * @offset: offset from the beginning of identification registers region
312  * @mask: bitfield mask
313  * @data: new value
314  */
315 static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset,
316 			    u32 mask, u32 data)
317 {
318 	if (~mask)
319 		data = (ioread32(ci->hw_bank.abs + offset) & ~mask)
320 			| (data & mask);
321 
322 	iowrite32(data, ci->hw_bank.abs + offset);
323 }
324 
325 /**
326  * hw_read: reads from a hw register
327  * @ci: the controller
328  * @reg:  register index
329  * @mask: bitfield mask
330  *
331  * This function returns register contents
332  */
333 static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
334 {
335 	return ioread32(ci->hw_bank.regmap[reg]) & mask;
336 }
337 
338 #ifdef CONFIG_SOC_IMX28
339 static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
340 {
341 	__asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
342 }
343 #else
344 static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
345 {
346 }
347 #endif
348 
349 static inline void __hw_write(struct ci_hdrc *ci, u32 val,
350 		void __iomem *addr)
351 {
352 	if (ci->imx28_write_fix)
353 		imx28_ci_writel(val, addr);
354 	else
355 		iowrite32(val, addr);
356 }
357 
358 /**
359  * hw_write: writes to a hw register
360  * @ci: the controller
361  * @reg:  register index
362  * @mask: bitfield mask
363  * @data: new value
364  */
365 static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
366 			    u32 mask, u32 data)
367 {
368 	if (~mask)
369 		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
370 			| (data & mask);
371 
372 	__hw_write(ci, data, ci->hw_bank.regmap[reg]);
373 }
374 
375 /**
376  * hw_test_and_clear: tests & clears a hw register
377  * @ci: the controller
378  * @reg:  register index
379  * @mask: bitfield mask
380  *
381  * This function returns register contents
382  */
383 static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
384 				    u32 mask)
385 {
386 	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
387 
388 	__hw_write(ci, val, ci->hw_bank.regmap[reg]);
389 	return val;
390 }
391 
392 /**
393  * hw_test_and_write: tests & writes a hw register
394  * @ci: the controller
395  * @reg:  register index
396  * @mask: bitfield mask
397  * @data: new value
398  *
399  * This function returns register contents
400  */
401 static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
402 				    u32 mask, u32 data)
403 {
404 	u32 val = hw_read(ci, reg, ~0);
405 
406 	hw_write(ci, reg, mask, data);
407 	return (val & mask) >> __ffs(mask);
408 }
409 
410 /**
411  * ci_otg_is_fsm_mode: runtime check if otg controller
412  * is in otg fsm mode.
413  *
414  * @ci: chipidea device
415  */
416 static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
417 {
418 #ifdef CONFIG_USB_OTG_FSM
419 	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
420 
421 	return ci->is_otg && ci->roles[CI_ROLE_HOST] &&
422 		ci->roles[CI_ROLE_GADGET] && (otg_caps->srp_support ||
423 		otg_caps->hnp_support || otg_caps->adp_support);
424 #else
425 	return false;
426 #endif
427 }
428 
429 #if IS_ENABLED(CONFIG_USB_CHIPIDEA_ULPI)
430 int ci_ulpi_init(struct ci_hdrc *ci);
431 void ci_ulpi_exit(struct ci_hdrc *ci);
432 int ci_ulpi_resume(struct ci_hdrc *ci);
433 #else
434 static inline int ci_ulpi_init(struct ci_hdrc *ci) { return 0; }
435 static inline void ci_ulpi_exit(struct ci_hdrc *ci) { }
436 static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; }
437 #endif
438 
439 u32 hw_read_intr_enable(struct ci_hdrc *ci);
440 
441 u32 hw_read_intr_status(struct ci_hdrc *ci);
442 
443 int hw_device_reset(struct ci_hdrc *ci);
444 
445 int hw_port_test_set(struct ci_hdrc *ci, u8 mode);
446 
447 u8 hw_port_test_get(struct ci_hdrc *ci);
448 
449 void hw_phymode_configure(struct ci_hdrc *ci);
450 
451 void ci_platform_configure(struct ci_hdrc *ci);
452 
453 void dbg_create_files(struct ci_hdrc *ci);
454 
455 void dbg_remove_files(struct ci_hdrc *ci);
456 #endif	/* __DRIVERS_USB_CHIPIDEA_CI_H */
457