1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Cadence CDNSP DRD Driver. 4 * 5 * Copyright (C) 2020 Cadence. 6 * 7 * Author: Pawel Laszczak <pawell@cadence.com> 8 * 9 * Code based on Linux XHCI driver. 10 * Origin: Copyright (C) 2008 Intel Corp. 11 */ 12 #ifndef __LINUX_CDNSP_GADGET_H 13 #define __LINUX_CDNSP_GADGET_H 14 15 #include <linux/io-64-nonatomic-lo-hi.h> 16 #include <linux/usb/gadget.h> 17 #include <linux/irq.h> 18 19 /* Max number slots - only 1 is allowed. */ 20 #define CDNSP_DEV_MAX_SLOTS 1 21 22 #define CDNSP_EP0_SETUP_SIZE 512 23 24 /* One control and 15 for in and 15 for out endpoints. */ 25 #define CDNSP_ENDPOINTS_NUM 31 26 27 /* Best Effort Service Latency. */ 28 #define CDNSP_DEFAULT_BESL 0 29 30 /* Device Controller command default timeout value in us */ 31 #define CDNSP_CMD_TIMEOUT (15 * 1000) 32 33 /* Up to 16 ms to halt an device controller */ 34 #define CDNSP_MAX_HALT_USEC (16 * 1000) 35 36 #define CDNSP_CTX_SIZE 2112 37 38 /* 39 * Controller register interface. 40 */ 41 42 /** 43 * struct cdnsp_cap_regs - CDNSP Registers. 44 * @hc_capbase: Length of the capabilities register and controller 45 * version number 46 * @hcs_params1: HCSPARAMS1 - Structural Parameters 1 47 * @hcs_params2: HCSPARAMS2 - Structural Parameters 2 48 * @hcs_params3: HCSPARAMS3 - Structural Parameters 3 49 * @hcc_params: HCCPARAMS - Capability Parameters 50 * @db_off: DBOFF - Doorbell array offset 51 * @run_regs_off: RTSOFF - Runtime register space offset 52 * @hcc_params2: HCCPARAMS2 Capability Parameters 2, 53 */ 54 struct cdnsp_cap_regs { 55 __le32 hc_capbase; 56 __le32 hcs_params1; 57 __le32 hcs_params2; 58 __le32 hcs_params3; 59 __le32 hcc_params; 60 __le32 db_off; 61 __le32 run_regs_off; 62 __le32 hcc_params2; 63 /* Reserved up to (CAPLENGTH - 0x1C) */ 64 }; 65 66 /* hc_capbase bitmasks. */ 67 /* bits 7:0 - how long is the Capabilities register. */ 68 #define HC_LENGTH(p) (((p) >> 00) & GENMASK(7, 0)) 69 /* bits 31:16 */ 70 #define HC_VERSION(p) (((p) >> 16) & GENMASK(15, 1)) 71 72 /* HCSPARAMS1 - hcs_params1 - bitmasks */ 73 /* bits 0:7, Max Device Endpoints */ 74 #define HCS_ENDPOINTS_MASK GENMASK(7, 0) 75 #define HCS_ENDPOINTS(p) (((p) & HCS_ENDPOINTS_MASK) >> 0) 76 77 /* HCCPARAMS offset from PCI base address */ 78 #define HCC_PARAMS_OFFSET 0x10 79 80 /* HCCPARAMS - hcc_params - bitmasks */ 81 /* 1: device controller can use 64-bit address pointers. */ 82 #define HCC_64BIT_ADDR(p) ((p) & BIT(0)) 83 /* 1: device controller uses 64-byte Device Context structures. */ 84 #define HCC_64BYTE_CONTEXT(p) ((p) & BIT(2)) 85 /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */ 86 #define HCC_MAX_PSA(p) ((((p) >> 12) & 0xf) + 1) 87 /* Extended Capabilities pointer from PCI base. */ 88 #define HCC_EXT_CAPS(p) (((p) & GENMASK(31, 16)) >> 16) 89 90 #define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) 91 92 /* db_off bitmask - bits 0:1 reserved. */ 93 #define DBOFF_MASK GENMASK(31, 2) 94 95 /* run_regs_off bitmask - bits 0:4 reserved. */ 96 #define RTSOFF_MASK GENMASK(31, 5) 97 98 /** 99 * struct cdnsp_op_regs - Device Controller Operational Registers. 100 * @command: USBCMD - Controller command register. 101 * @status: USBSTS - Controller status register. 102 * @page_size: This indicates the page size that the device controller supports. 103 * If bit n is set, the controller supports a page size of 2^(n+12), 104 * up to a 128MB page size. 4K is the minimum page size. 105 * @dnctrl: DNCTRL - Device notification control register. 106 * @cmd_ring: CRP - 64-bit Command Ring Pointer. 107 * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer. 108 * @config_reg: CONFIG - Configure Register 109 * @port_reg_base: PORTSCn - base address for Port Status and Control 110 * Each port has a Port Status and Control register, 111 * followed by a Port Power Management Status and Control 112 * register, a Port Link Info register, and a reserved 113 * register. 114 */ 115 struct cdnsp_op_regs { 116 __le32 command; 117 __le32 status; 118 __le32 page_size; 119 __le32 reserved1; 120 __le32 reserved2; 121 __le32 dnctrl; 122 __le64 cmd_ring; 123 /* rsvd: offset 0x20-2F. */ 124 __le32 reserved3[4]; 125 __le64 dcbaa_ptr; 126 __le32 config_reg; 127 /* rsvd: offset 0x3C-3FF. */ 128 __le32 reserved4[241]; 129 /* port 1 registers, which serve as a base address for other ports. */ 130 __le32 port_reg_base; 131 }; 132 133 /* Number of registers per port. */ 134 #define NUM_PORT_REGS 4 135 136 /** 137 * struct cdnsp_port_regs - Port Registers. 138 * @portsc: PORTSC - Port Status and Control Register. 139 * @portpmsc: PORTPMSC - Port Power Managements Status and Control Register. 140 * @portli: PORTLI - Port Link Info register. 141 */ 142 struct cdnsp_port_regs { 143 __le32 portsc; 144 __le32 portpmsc; 145 __le32 portli; 146 __le32 reserved; 147 }; 148 149 /* 150 * These bits are Read Only (RO) and should be saved and written to the 151 * registers: 0 (connect status) and 10:13 (port speed). 152 * These bits are also sticky - meaning they're in the AUX well and they aren't 153 * changed by a hot and warm. 154 */ 155 #define CDNSP_PORT_RO (PORT_CONNECT | DEV_SPEED_MASK) 156 157 /* 158 * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit: 159 * bits 5:8 (link state), 25:26 ("wake on" enable state) 160 */ 161 #define CDNSP_PORT_RWS (PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E) 162 163 /* 164 * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect: 165 * bits 1 (port enable/disable), 17 ( connect changed), 166 * 21 (port reset changed) , 22 (Port Link State Change), 167 */ 168 #define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC) 169 170 /* USBCMD - USB command - bitmasks. */ 171 /* Run/Stop, controller execution - do not write unless controller is halted.*/ 172 #define CMD_R_S BIT(0) 173 /* 174 * Reset device controller - resets internal controller state machine and all 175 * registers (except PCI config regs). 176 */ 177 #define CMD_RESET BIT(1) 178 /* Event Interrupt Enable - a '1' allows interrupts from the controller. */ 179 #define CMD_INTE BIT(2) 180 /* 181 * Device System Error Interrupt Enable - get out-of-band signal for 182 * controller errors. 183 */ 184 #define CMD_DSEIE BIT(3) 185 /* device controller save/restore state. */ 186 #define CMD_CSS BIT(8) 187 #define CMD_CRS BIT(9) 188 /* 189 * Enable Wrap Event - '1' means device controller generates an event 190 * when MFINDEX wraps. 191 */ 192 #define CMD_EWE BIT(10) 193 /* 1: device enabled */ 194 #define CMD_DEVEN BIT(17) 195 /* bits 18:31 are reserved (and should be preserved on writes). */ 196 197 /* Command register values to disable interrupts. */ 198 #define CDNSP_IRQS (CMD_INTE | CMD_DSEIE | CMD_EWE) 199 200 /* USBSTS - USB status - bitmasks */ 201 /* controller not running - set to 1 when run/stop bit is cleared. */ 202 #define STS_HALT BIT(0) 203 /* 204 * serious error, e.g. PCI parity error. The controller will clear 205 * the run/stop bit. 206 */ 207 #define STS_FATAL BIT(2) 208 /* event interrupt - clear this prior to clearing any IP flags in IR set.*/ 209 #define STS_EINT BIT(3) 210 /* port change detect */ 211 #define STS_PCD BIT(4) 212 /* save state status - '1' means device controller is saving state. */ 213 #define STS_SSS BIT(8) 214 /* restore state status - '1' means controllers is restoring state. */ 215 #define STS_RSS BIT(9) 216 /* 1: save or restore error */ 217 #define STS_SRE BIT(10) 218 /* 1: device Not Ready to accept doorbell or op reg writes after reset. */ 219 #define STS_CNR BIT(11) 220 /* 1: internal Device Controller Error.*/ 221 #define STS_HCE BIT(12) 222 223 /* CRCR - Command Ring Control Register - cmd_ring bitmasks. */ 224 /* bit 0 is the command ring cycle state. */ 225 #define CMD_RING_CS BIT(0) 226 /* stop ring immediately - abort the currently executing command. */ 227 #define CMD_RING_ABORT BIT(2) 228 /* 229 * Command Ring Busy. 230 * Set when Doorbell register is written with DB for command and cleared when 231 * the controller reached end of CR. 232 */ 233 #define CMD_RING_BUSY(p) ((p) & BIT(4)) 234 /* 1: command ring is running */ 235 #define CMD_RING_RUNNING BIT(3) 236 /* Command Ring pointer - bit mask for the lower 32 bits. */ 237 #define CMD_RING_RSVD_BITS GENMASK(5, 0) 238 239 /* CONFIG - Configure Register - config_reg bitmasks. */ 240 /* bits 0:7 - maximum number of device slots enabled. */ 241 #define MAX_DEVS GENMASK(7, 0) 242 /* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */ 243 #define CONFIG_U3E BIT(8) 244 245 /* PORTSC - Port Status and Control Register - port_reg_base bitmasks */ 246 /* 1: device connected. */ 247 #define PORT_CONNECT BIT(0) 248 /* 1: port enabled. */ 249 #define PORT_PED BIT(1) 250 /* 1: port reset signaling asserted. */ 251 #define PORT_RESET BIT(4) 252 /* 253 * Port Link State - bits 5:8 254 * A read gives the current link PM state of the port, 255 * a write with Link State Write Strobe sets the link state. 256 */ 257 #define PORT_PLS_MASK GENMASK(8, 5) 258 #define XDEV_U0 (0x0 << 5) 259 #define XDEV_U1 (0x1 << 5) 260 #define XDEV_U2 (0x2 << 5) 261 #define XDEV_U3 (0x3 << 5) 262 #define XDEV_DISABLED (0x4 << 5) 263 #define XDEV_RXDETECT (0x5 << 5) 264 #define XDEV_INACTIVE (0x6 << 5) 265 #define XDEV_POLLING (0x7 << 5) 266 #define XDEV_RECOVERY (0x8 << 5) 267 #define XDEV_HOT_RESET (0x9 << 5) 268 #define XDEV_COMP_MODE (0xa << 5) 269 #define XDEV_TEST_MODE (0xb << 5) 270 #define XDEV_RESUME (0xf << 5) 271 /* 1: port has power. */ 272 #define PORT_POWER BIT(9) 273 /* 274 * bits 10:13 indicate device speed: 275 * 0 - undefined speed - port hasn't be initialized by a reset yet 276 * 1 - full speed 277 * 2 - Reserved (Low Speed not supported 278 * 3 - high speed 279 * 4 - super speed 280 * 5 - super speed 281 * 6-15 reserved 282 */ 283 #define DEV_SPEED_MASK GENMASK(13, 10) 284 #define XDEV_FS (0x1 << 10) 285 #define XDEV_HS (0x3 << 10) 286 #define XDEV_SS (0x4 << 10) 287 #define XDEV_SSP (0x5 << 10) 288 #define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0 << 10)) 289 #define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) 290 #define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) 291 #define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) 292 #define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) 293 #define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) 294 #define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) 295 /* Port Link State Write Strobe - set this when changing link state */ 296 #define PORT_LINK_STROBE BIT(16) 297 /* 1: connect status change */ 298 #define PORT_CSC BIT(17) 299 /* 1: warm reset for a USB 3.0 device is done. */ 300 #define PORT_WRC BIT(19) 301 /* 1: reset change - 1 to 0 transition of PORT_RESET */ 302 #define PORT_RC BIT(21) 303 /* 304 * port link status change - set on some port link state transitions: 305 * Transition Reason 306 * ---------------------------------------------------------------------------- 307 * - U3 to Resume Wakeup signaling from a device 308 * - Resume to Recovery to U0 USB 3.0 device resume 309 * - Resume to U0 USB 2.0 device resume 310 * - U3 to Recovery to U0 Software resume of USB 3.0 device complete 311 * - U3 to U0 Software resume of USB 2.0 device complete 312 * - U2 to U0 L1 resume of USB 2.1 device complete 313 * - U0 to U0 L1 entry rejection by USB 2.1 device 314 * - U0 to disabled L1 entry error with USB 2.1 device 315 * - Any state to inactive Error on USB 3.0 port 316 */ 317 #define PORT_PLC BIT(22) 318 /* Port configure error change - port failed to configure its link partner. */ 319 #define PORT_CEC BIT(23) 320 /* Wake on connect (enable). */ 321 #define PORT_WKCONN_E BIT(25) 322 /* Wake on disconnect (enable). */ 323 #define PORT_WKDISC_E BIT(26) 324 /* Indicates if Warm Reset is being received. */ 325 #define PORT_WR BIT(31) 326 327 #define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC) 328 329 /* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */ 330 /* Enables U1 entry. */ 331 #define PORT_U1_TIMEOUT_MASK GENMASK(7, 0) 332 #define PORT_U1_TIMEOUT(p) ((p) & PORT_U1_TIMEOUT_MASK) 333 /* Enables U2 entry .*/ 334 #define PORT_U2_TIMEOUT_MASK GENMASK(14, 8) 335 #define PORT_U2_TIMEOUT(p) (((p) << 8) & PORT_U2_TIMEOUT_MASK) 336 337 /* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */ 338 #define PORT_L1S_MASK GENMASK(2, 0) 339 #define PORT_L1S(p) ((p) & PORT_L1S_MASK) 340 #define PORT_L1S_ACK PORT_L1S(1) 341 #define PORT_L1S_NYET PORT_L1S(2) 342 #define PORT_L1S_STALL PORT_L1S(3) 343 #define PORT_L1S_TIMEOUT PORT_L1S(4) 344 /* Remote Wake Enable. */ 345 #define PORT_RWE BIT(3) 346 /* Best Effort Service Latency (BESL). */ 347 #define PORT_BESL(p) (((p) << 4) & GENMASK(7, 4)) 348 /* Hardware LPM Enable (HLE). */ 349 #define PORT_HLE BIT(16) 350 /* Received Best Effort Service Latency (BESL). */ 351 #define PORT_RRBESL(p) (((p) & GENMASK(20, 17)) >> 17) 352 /* Port Test Control. */ 353 #define PORT_TEST_MODE_MASK GENMASK(31, 28) 354 #define PORT_TEST_MODE(p) (((p) << 28) & PORT_TEST_MODE_MASK) 355 356 /** 357 * struct cdnsp_intr_reg - Interrupt Register Set. 358 * @irq_pending: IMAN - Interrupt Management Register. Used to enable 359 * interrupts and check for pending interrupts. 360 * @irq_control: IMOD - Interrupt Moderation Register. 361 * Used to throttle interrupts. 362 * @erst_size: Number of segments in the Event Ring Segment Table (ERST). 363 * @erst_base: ERST base address. 364 * @erst_dequeue: Event ring dequeue pointer. 365 * 366 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event 367 * Ring Segment Table (ERST) associated with it. The event ring is comprised of 368 * multiple segments of the same size. The controller places events on the ring 369 * and "updates the Cycle bit in the TRBs to indicate to software the current 370 * position of the Enqueue Pointer." The driver processes those events and 371 * updates the dequeue pointer. 372 */ 373 struct cdnsp_intr_reg { 374 __le32 irq_pending; 375 __le32 irq_control; 376 __le32 erst_size; 377 __le32 rsvd; 378 __le64 erst_base; 379 __le64 erst_dequeue; 380 }; 381 382 /* IMAN - Interrupt Management Register - irq_pending bitmasks l. */ 383 #define IMAN_IE BIT(1) 384 #define IMAN_IP BIT(0) 385 /* bits 2:31 need to be preserved */ 386 #define IMAN_IE_SET(p) (((p) & IMAN_IE) | 0x2) 387 #define IMAN_IE_CLEAR(p) (((p) & IMAN_IE) & ~(0x2)) 388 389 /* IMOD - Interrupter Moderation Register - irq_control bitmasks. */ 390 /* 391 * Minimum interval between interrupts (in 250ns intervals). The interval 392 * between interrupts will be longer if there are no events on the event ring. 393 * Default is 4000 (1 ms). 394 */ 395 #define IMOD_INTERVAL_MASK GENMASK(15, 0) 396 /* Counter used to count down the time to the next interrupt - HW use only */ 397 #define IMOD_COUNTER_MASK GENMASK(31, 16) 398 #define IMOD_DEFAULT_INTERVAL 0 399 400 /* erst_size bitmasks. */ 401 /* Preserve bits 16:31 of erst_size. */ 402 #define ERST_SIZE_MASK GENMASK(31, 16) 403 404 /* erst_dequeue bitmasks. */ 405 /* 406 * Dequeue ERST Segment Index (DESI) - Segment number (or alias) 407 * where the current dequeue pointer lies. This is an optional HW hint. 408 */ 409 #define ERST_DESI_MASK GENMASK(2, 0) 410 /* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */ 411 #define ERST_EHB BIT(3) 412 #define ERST_PTR_MASK GENMASK(3, 0) 413 414 /** 415 * struct cdnsp_run_regs 416 * @microframe_index: MFINDEX - current microframe number. 417 * @ir_set: Array of Interrupter registers. 418 * 419 * Device Controller Runtime Registers: 420 * "Software should read and write these registers using only Dword (32 bit) 421 * or larger accesses" 422 */ 423 struct cdnsp_run_regs { 424 __le32 microframe_index; 425 __le32 rsvd[7]; 426 struct cdnsp_intr_reg ir_set[128]; 427 }; 428 429 /** 430 * USB2.0 Port Peripheral Configuration Registers. 431 * @ext_cap: Header register for Extended Capability. 432 * @port_reg1: Timer Configuration Register. 433 * @port_reg2: Timer Configuration Register. 434 * @port_reg3: Timer Configuration Register. 435 * @port_reg4: Timer Configuration Register. 436 * @port_reg5: Timer Configuration Register. 437 * @port_reg6: Chicken bits for USB20PPP. 438 */ 439 struct cdnsp_20port_cap { 440 __le32 ext_cap; 441 __le32 port_reg1; 442 __le32 port_reg2; 443 __le32 port_reg3; 444 __le32 port_reg4; 445 __le32 port_reg5; 446 __le32 port_reg6; 447 }; 448 449 /* Extended capability register fields */ 450 #define EXT_CAPS_ID(p) (((p) >> 0) & GENMASK(7, 0)) 451 #define EXT_CAPS_NEXT(p) (((p) >> 8) & GENMASK(7, 0)) 452 /* Extended capability IDs - ID 0 reserved */ 453 #define EXT_CAPS_PROTOCOL 2 454 455 /* USB 2.0 Port Peripheral Configuration Extended Capability */ 456 #define EXT_CAP_CFG_DEV_20PORT_CAP_ID 0xC1 457 /* 458 * Setting this bit to '1' enables automatic wakeup from L1 state on transfer 459 * TRB prepared when USBSSP operates in USB2.0 mode. 460 */ 461 #define PORT_REG6_L1_L0_HW_EN BIT(1) 462 /* 463 * Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0 464 * mode (disables High Speed). 465 */ 466 #define PORT_REG6_FORCE_FS BIT(0) 467 468 /** 469 * USB3.x Port Peripheral Configuration Registers. 470 * @ext_cap: Header register for Extended Capability. 471 * @mode_addr: Miscellaneous 3xPORT operation mode configuration register. 472 * @mode_2: 3x Port Control Register 2. 473 */ 474 struct cdnsp_3xport_cap { 475 __le32 ext_cap; 476 __le32 mode_addr; 477 __le32 reserved[52]; 478 __le32 mode_2; 479 }; 480 481 /* Extended Capability Header for 3XPort Configuration Registers. */ 482 #define D_XEC_CFG_3XPORT_CAP 0xC0 483 #define CFG_3XPORT_SSP_SUPPORT BIT(31) 484 #define CFG_3XPORT_U1_PIPE_CLK_GATE_EN BIT(0) 485 486 /* Revision Extended Capability ID */ 487 #define RTL_REV_CAP 0xC4 488 #define RTL_REV_CAP_RX_BUFF_CMD_SIZE BITMASK(31, 24) 489 #define RTL_REV_CAP_RX_BUFF_SIZE BITMASK(15, 0) 490 #define RTL_REV_CAP_TX_BUFF_CMD_SIZE BITMASK(31, 24) 491 #define RTL_REV_CAP_TX_BUFF_SIZE BITMASK(15, 0) 492 493 #define CDNSP_VER_1 0x00000000 494 #define CDNSP_VER_2 0x10000000 495 496 #define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) \ 497 (readl(&(pdev)->rev_cap->ep_supported) & \ 498 (BIT(ep_num) << ((dir) ? 0 : 16))) 499 500 /** 501 * struct cdnsp_rev_cap - controller capabilities. 502 * @ext_cap: Header for RTL Revision Extended Capability. 503 * @rtl_revision: RTL revision. 504 * @rx_buff_size: Rx buffer sizes. 505 * @tx_buff_size: Tx buffer sizes. 506 * @ep_supported: Supported endpoints. 507 * @ctrl_revision: Controller revision ID. 508 */ 509 struct cdnsp_rev_cap { 510 __le32 ext_cap; 511 __le32 rtl_revision; 512 __le32 rx_buff_size; 513 __le32 tx_buff_size; 514 __le32 ep_supported; 515 __le32 ctrl_revision; 516 }; 517 518 /* USB2.0 Port Peripheral Configuration Registers. */ 519 #define D_XEC_PRE_REGS_CAP 0xC8 520 #define REG_CHICKEN_BITS_2_OFFSET 0x48 521 #define CHICKEN_XDMA_2_TP_CACHE_DIS BIT(28) 522 523 /* XBUF Extended Capability ID. */ 524 #define XBUF_CAP_ID 0xCB 525 #define XBUF_RX_TAG_MASK_0_OFFSET 0x1C 526 #define XBUF_RX_TAG_MASK_1_OFFSET 0x24 527 #define XBUF_TX_CMD_OFFSET 0x2C 528 529 /** 530 * struct cdnsp_doorbell_array. 531 * @cmd_db: Command ring doorbell register. 532 * @ep_db: Endpoint ring doorbell register. 533 * Bits 0 - 7: Endpoint target. 534 * Bits 8 - 15: RsvdZ. 535 * Bits 16 - 31: Stream ID. 536 */ 537 struct cdnsp_doorbell_array { 538 __le32 cmd_db; 539 __le32 ep_db; 540 }; 541 542 #define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) 543 #define DB_VALUE_EP0_OUT(ep, stream) ((ep) & 0xff) 544 #define DB_VALUE_CMD 0x00000000 545 546 /** 547 * struct cdnsp_container_ctx. 548 * @type: Type of context. Used to calculated offsets to contained contexts. 549 * @size: Size of the context data. 550 * @ctx_size: context data structure size - 64 or 32 bits. 551 * @dma: dma address of the bytes. 552 * @bytes: The raw context data given to HW. 553 * 554 * Represents either a Device or Input context. Holds a pointer to the raw 555 * memory used for the context (bytes) and dma address of it (dma). 556 */ 557 struct cdnsp_container_ctx { 558 unsigned int type; 559 #define CDNSP_CTX_TYPE_DEVICE 0x1 560 #define CDNSP_CTX_TYPE_INPUT 0x2 561 int size; 562 int ctx_size; 563 dma_addr_t dma; 564 u8 *bytes; 565 }; 566 567 /** 568 * struct cdnsp_slot_ctx 569 * @dev_info: Device speed, and last valid endpoint. 570 * @dev_port: Device port number that is needed to access the USB device. 571 * @int_target: Interrupter target number. 572 * @dev_state: Slot state and device address. 573 * 574 * Slot Context - This assumes the controller uses 32-byte context 575 * structures. If the controller uses 64-byte contexts, there is an additional 576 * 32 bytes reserved at the end of the slot context for controller internal use. 577 */ 578 struct cdnsp_slot_ctx { 579 __le32 dev_info; 580 __le32 dev_port; 581 __le32 int_target; 582 __le32 dev_state; 583 /* offset 0x10 to 0x1f reserved for controller internal use. */ 584 __le32 reserved[4]; 585 }; 586 587 /* Bits 20:23 in the Slot Context are the speed for the device. */ 588 #define SLOT_SPEED_FS (XDEV_FS << 10) 589 #define SLOT_SPEED_HS (XDEV_HS << 10) 590 #define SLOT_SPEED_SS (XDEV_SS << 10) 591 #define SLOT_SPEED_SSP (XDEV_SSP << 10) 592 593 /* dev_info bitmasks. */ 594 /* Device speed - values defined by PORTSC Device Speed field - 20:23. */ 595 #define DEV_SPEED GENMASK(23, 20) 596 #define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20) 597 /* Index of the last valid endpoint context in this device context - 27:31. */ 598 #define LAST_CTX_MASK ((unsigned int)GENMASK(31, 27)) 599 #define LAST_CTX(p) ((p) << 27) 600 #define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1) 601 #define SLOT_FLAG BIT(0) 602 #define EP0_FLAG BIT(1) 603 604 /* dev_port bitmasks */ 605 /* Device port number that is needed to access the USB device. */ 606 #define DEV_PORT(p) (((p) & 0xff) << 16) 607 608 /* dev_state bitmasks */ 609 /* USB device address - assigned by the controller. */ 610 #define DEV_ADDR_MASK GENMASK(7, 0) 611 /* Slot state */ 612 #define SLOT_STATE GENMASK(31, 27) 613 #define GET_SLOT_STATE(p) (((p) & SLOT_STATE) >> 27) 614 615 #define SLOT_STATE_DISABLED 0 616 #define SLOT_STATE_ENABLED SLOT_STATE_DISABLED 617 #define SLOT_STATE_DEFAULT 1 618 #define SLOT_STATE_ADDRESSED 2 619 #define SLOT_STATE_CONFIGURED 3 620 621 /** 622 * struct cdnsp_ep_ctx. 623 * @ep_info: Endpoint state, streams, mult, and interval information. 624 * @ep_info2: Information on endpoint type, max packet size, max burst size, 625 * error count, and whether the controller will force an event for 626 * all transactions. 627 * @deq: 64-bit ring dequeue pointer address. If the endpoint only 628 * defines one stream, this points to the endpoint transfer ring. 629 * Otherwise, it points to a stream context array, which has a 630 * ring pointer for each flow. 631 * @tx_info: Average TRB lengths for the endpoint ring and 632 * max payload within an Endpoint Service Interval Time (ESIT). 633 * 634 * Endpoint Context - This assumes the controller uses 32-byte context 635 * structures. If the controller uses 64-byte contexts, there is an additional 636 * 32 bytes reserved at the end of the endpoint context for controller internal 637 * use. 638 */ 639 struct cdnsp_ep_ctx { 640 __le32 ep_info; 641 __le32 ep_info2; 642 __le64 deq; 643 __le32 tx_info; 644 /* offset 0x14 - 0x1f reserved for controller internal use. */ 645 __le32 reserved[3]; 646 }; 647 648 /* ep_info bitmasks. */ 649 /* 650 * Endpoint State - bits 0:2: 651 * 0 - disabled 652 * 1 - running 653 * 2 - halted due to halt condition 654 * 3 - stopped 655 * 4 - TRB error 656 * 5-7 - reserved 657 */ 658 #define EP_STATE_MASK GENMASK(3, 0) 659 #define EP_STATE_DISABLED 0 660 #define EP_STATE_RUNNING 1 661 #define EP_STATE_HALTED 2 662 #define EP_STATE_STOPPED 3 663 #define EP_STATE_ERROR 4 664 #define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK) 665 666 /* Mult - Max number of burst within an interval, in EP companion desc. */ 667 #define EP_MULT(p) (((p) << 8) & GENMASK(9, 8)) 668 #define CTX_TO_EP_MULT(p) (((p) & GENMASK(9, 8)) >> 8) 669 /* bits 10:14 are Max Primary Streams. */ 670 /* bit 15 is Linear Stream Array. */ 671 /* Interval - period between requests to an endpoint - 125u increments. */ 672 #define EP_INTERVAL(p) (((p) << 16) & GENMASK(23, 16)) 673 #define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) & GENMASK(23, 16)) >> 16)) 674 #define CTX_TO_EP_INTERVAL(p) (((p) & GENMASK(23, 16)) >> 16) 675 #define EP_MAXPSTREAMS_MASK GENMASK(14, 10) 676 #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) 677 #define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10) 678 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ 679 #define EP_HAS_LSA BIT(15) 680 681 /* ep_info2 bitmasks */ 682 #define ERROR_COUNT(p) (((p) & 0x3) << 1) 683 #define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7) 684 #define EP_TYPE(p) ((p) << 3) 685 #define ISOC_OUT_EP 1 686 #define BULK_OUT_EP 2 687 #define INT_OUT_EP 3 688 #define CTRL_EP 4 689 #define ISOC_IN_EP 5 690 #define BULK_IN_EP 6 691 #define INT_IN_EP 7 692 /* bit 6 reserved. */ 693 /* bit 7 is Device Initiate Disable - for disabling stream selection. */ 694 #define MAX_BURST(p) (((p) << 8) & GENMASK(15, 8)) 695 #define CTX_TO_MAX_BURST(p) (((p) & GENMASK(15, 8)) >> 8) 696 #define MAX_PACKET(p) (((p) << 16) & GENMASK(31, 16)) 697 #define MAX_PACKET_MASK GENMASK(31, 16) 698 #define MAX_PACKET_DECODED(p) (((p) & GENMASK(31, 16)) >> 16) 699 700 /* tx_info bitmasks. */ 701 #define EP_AVG_TRB_LENGTH(p) ((p) & GENMASK(15, 0)) 702 #define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) << 16) & GENMASK(31, 16)) 703 #define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) & GENMASK(23, 16)) >> 16) << 24) 704 #define CTX_TO_MAX_ESIT_PAYLOAD_LO(p) (((p) & GENMASK(31, 16)) >> 16) 705 #define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) & GENMASK(31, 24)) >> 24) 706 707 /* deq bitmasks. */ 708 #define EP_CTX_CYCLE_MASK BIT(0) 709 #define CTX_DEQ_MASK (~0xfL) 710 711 /** 712 * struct cdnsp_input_control_context 713 * Input control context; 714 * 715 * @drop_context: Set the bit of the endpoint context you want to disable. 716 * @add_context: Set the bit of the endpoint context you want to enable. 717 */ 718 struct cdnsp_input_control_ctx { 719 __le32 drop_flags; 720 __le32 add_flags; 721 __le32 rsvd2[6]; 722 }; 723 724 /** 725 * Represents everything that is needed to issue a command on the command ring. 726 * 727 * @in_ctx: Pointer to input context structure. 728 * @status: Command Completion Code for last command. 729 * @command_trb: Pointer to command TRB. 730 */ 731 struct cdnsp_command { 732 /* Input context for changing device state. */ 733 struct cdnsp_container_ctx *in_ctx; 734 u32 status; 735 union cdnsp_trb *command_trb; 736 }; 737 738 /** 739 * Stream context structure. 740 * 741 * @stream_ring: 64-bit stream ring address, cycle state, and stream type. 742 * @reserved: offset 0x14 - 0x1f reserved for controller internal use. 743 */ 744 struct cdnsp_stream_ctx { 745 __le64 stream_ring; 746 __le32 reserved[2]; 747 }; 748 749 /* Stream Context Types - bits 3:1 of stream ctx deq ptr. */ 750 #define SCT_FOR_CTX(p) (((p) << 1) & GENMASK(3, 1)) 751 /* Secondary stream array type, dequeue pointer is to a transfer ring. */ 752 #define SCT_SEC_TR 0 753 /* Primary stream array type, dequeue pointer is to a transfer ring. */ 754 #define SCT_PRI_TR 1 755 756 /** 757 * struct cdnsp_stream_info: Representing everything that is needed to 758 * supports stream capable endpoints. 759 * @stream_rings: Array of pointers containing Transfer rings for all 760 * supported streams. 761 * @num_streams: Number of streams, including stream 0. 762 * @stream_ctx_array: The stream context array may be bigger than the number 763 * of streams the driver asked for. 764 * @num_stream_ctxs: Number of streams. 765 * @ctx_array_dma: Dma address of Context Stream Array. 766 * @trb_address_map: For mapping physical TRB addresses to segments in 767 * stream rings. 768 * @td_count: Number of TDs associated with endpoint. 769 * @first_prime_det: First PRIME packet detected. 770 * @drbls_count: Number of allowed doorbells. 771 */ 772 struct cdnsp_stream_info { 773 struct cdnsp_ring **stream_rings; 774 unsigned int num_streams; 775 struct cdnsp_stream_ctx *stream_ctx_array; 776 unsigned int num_stream_ctxs; 777 dma_addr_t ctx_array_dma; 778 struct radix_tree_root trb_address_map; 779 int td_count; 780 u8 first_prime_det; 781 #define STREAM_DRBL_FIFO_DEPTH 2 782 u8 drbls_count; 783 }; 784 785 #define STREAM_LOG_STREAMS 4 786 #define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS) 787 788 #if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1 789 #error "Not suupported stream value" 790 #endif 791 792 /** 793 * struct cdnsp_ep - extended device side representation of USB endpoint. 794 * @endpoint: usb endpoint 795 * @pending_req_list: List of requests queuing on transfer ring. 796 * @pdev: Device associated with this endpoint. 797 * @number: Endpoint number (1 - 15). 798 * idx: The device context index (DCI). 799 * interval: Interval between packets used for ISOC endpoint. 800 * @name: A human readable name e.g. ep1out. 801 * @direction: Endpoint direction. 802 * @buffering: Number of on-chip buffers related to endpoint. 803 * @buffering_period; Number of on-chip buffers related to periodic endpoint. 804 * @in_ctx: Pointer to input endpoint context structure. 805 * @out_ctx: Pointer to output endpoint context structure. 806 * @ring: Pointer to transfer ring. 807 * @stream_info: Hold stream information. 808 * @ep_state: Current state of endpoint. 809 * @skip: Sometimes the controller can not process isochronous endpoint ring 810 * quickly enough, and it will miss some isoc tds on the ring and 811 * generate Missed Service Error Event. 812 * Set skip flag when receive a Missed Service Error Event and 813 * process the missed tds on the endpoint ring. 814 */ 815 struct cdnsp_ep { 816 struct usb_ep endpoint; 817 struct list_head pending_list; 818 struct cdnsp_device *pdev; 819 u8 number; 820 u8 idx; 821 u32 interval; 822 char name[20]; 823 u8 direction; 824 u8 buffering; 825 u8 buffering_period; 826 struct cdnsp_ep_ctx *in_ctx; 827 struct cdnsp_ep_ctx *out_ctx; 828 struct cdnsp_ring *ring; 829 struct cdnsp_stream_info stream_info; 830 unsigned int ep_state; 831 #define EP_ENABLED BIT(0) 832 #define EP_DIS_IN_RROGRESS BIT(1) 833 #define EP_HALTED BIT(2) 834 #define EP_STOPPED BIT(3) 835 #define EP_WEDGE BIT(4) 836 #define EP0_HALTED_STATUS BIT(5) 837 #define EP_HAS_STREAMS BIT(6) 838 839 bool skip; 840 }; 841 842 /** 843 * struct cdnsp_device_context_array 844 * @dev_context_ptr: Array of 64-bit DMA addresses for device contexts. 845 * @dma: DMA address for device contexts structure. 846 */ 847 struct cdnsp_device_context_array { 848 __le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1]; 849 dma_addr_t dma; 850 }; 851 852 /** 853 * struct cdnsp_transfer_event. 854 * @buffer: 64-bit buffer address, or immediate data. 855 * @transfer_len: Data length transferred. 856 * @flags: Field is interpreted differently based on the type of TRB. 857 */ 858 struct cdnsp_transfer_event { 859 __le64 buffer; 860 __le32 transfer_len; 861 __le32 flags; 862 }; 863 864 /* Invalidate event after disabling endpoint. */ 865 #define TRB_EVENT_INVALIDATE 8 866 867 /* Transfer event TRB length bit mask. */ 868 /* bits 0:23 */ 869 #define EVENT_TRB_LEN(p) ((p) & GENMASK(23, 0)) 870 /* Completion Code - only applicable for some types of TRBs */ 871 #define COMP_CODE_MASK (0xff << 24) 872 #define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24) 873 #define COMP_INVALID 0 874 #define COMP_SUCCESS 1 875 #define COMP_DATA_BUFFER_ERROR 2 876 #define COMP_BABBLE_DETECTED_ERROR 3 877 #define COMP_TRB_ERROR 5 878 #define COMP_RESOURCE_ERROR 7 879 #define COMP_NO_SLOTS_AVAILABLE_ERROR 9 880 #define COMP_INVALID_STREAM_TYPE_ERROR 10 881 #define COMP_SLOT_NOT_ENABLED_ERROR 11 882 #define COMP_ENDPOINT_NOT_ENABLED_ERROR 12 883 #define COMP_SHORT_PACKET 13 884 #define COMP_RING_UNDERRUN 14 885 #define COMP_RING_OVERRUN 15 886 #define COMP_VF_EVENT_RING_FULL_ERROR 16 887 #define COMP_PARAMETER_ERROR 17 888 #define COMP_CONTEXT_STATE_ERROR 19 889 #define COMP_EVENT_RING_FULL_ERROR 21 890 #define COMP_INCOMPATIBLE_DEVICE_ERROR 22 891 #define COMP_MISSED_SERVICE_ERROR 23 892 #define COMP_COMMAND_RING_STOPPED 24 893 #define COMP_COMMAND_ABORTED 25 894 #define COMP_STOPPED 26 895 #define COMP_STOPPED_LENGTH_INVALID 27 896 #define COMP_STOPPED_SHORT_PACKET 28 897 #define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29 898 #define COMP_ISOCH_BUFFER_OVERRUN 31 899 #define COMP_EVENT_LOST_ERROR 32 900 #define COMP_UNDEFINED_ERROR 33 901 #define COMP_INVALID_STREAM_ID_ERROR 34 902 903 /*Transfer Event NRDY bit fields */ 904 #define TRB_TO_DEV_STREAM(p) ((p) & GENMASK(16, 0)) 905 #define TRB_TO_HOST_STREAM(p) ((p) & GENMASK(16, 0)) 906 #define STREAM_PRIME_ACK 0xFFFE 907 #define STREAM_REJECTED 0xFFFF 908 909 /** Transfer Event bit fields **/ 910 #define TRB_TO_EP_ID(p) (((p) & GENMASK(20, 16)) >> 16) 911 912 /** 913 * struct cdnsp_link_trb 914 * @segment_ptr: 64-bit segment pointer. 915 * @intr_target: Interrupter target. 916 * @control: Flags. 917 */ 918 struct cdnsp_link_trb { 919 __le64 segment_ptr; 920 __le32 intr_target; 921 __le32 control; 922 }; 923 924 /* control bitfields */ 925 #define LINK_TOGGLE BIT(1) 926 927 /** 928 * struct cdnsp_event_cmd - Command completion event TRB. 929 * cmd_trb: Pointer to command TRB, or the value passed by the event data trb 930 * status: Command completion parameters and error code. 931 * flags: Flags. 932 */ 933 struct cdnsp_event_cmd { 934 __le64 cmd_trb; 935 __le32 status; 936 __le32 flags; 937 }; 938 939 /* flags bitmasks */ 940 941 /* Address device - disable SetAddress. */ 942 #define TRB_BSR BIT(9) 943 944 /* Configure Endpoint - Deconfigure. */ 945 #define TRB_DC BIT(9) 946 947 /* Force Header */ 948 #define TRB_FH_TO_PACKET_TYPE(p) ((p) & GENMASK(4, 0)) 949 #define TRB_FH_TR_PACKET 0x4 950 #define TRB_FH_TO_DEVICE_ADDRESS(p) (((p) << 25) & GENMASK(31, 25)) 951 #define TRB_FH_TR_PACKET_DEV_NOT 0x6 952 #define TRB_FH_TO_NOT_TYPE(p) (((p) << 4) & GENMASK(7, 4)) 953 #define TRB_FH_TR_PACKET_FUNCTION_WAKE 0x1 954 #define TRB_FH_TO_INTERFACE(p) (((p) << 8) & GENMASK(15, 8)) 955 956 enum cdnsp_setup_dev { 957 SETUP_CONTEXT_ONLY, 958 SETUP_CONTEXT_ADDRESS, 959 }; 960 961 /* bits 24:31 are the slot ID. */ 962 #define TRB_TO_SLOT_ID(p) (((p) & GENMASK(31, 24)) >> 24) 963 #define SLOT_ID_FOR_TRB(p) (((p) << 24) & GENMASK(31, 24)) 964 965 /* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */ 966 #define TRB_TO_EP_INDEX(p) (((p) >> 16) & 0x1f) 967 968 #define EP_ID_FOR_TRB(p) ((((p) + 1) << 16) & GENMASK(20, 16)) 969 970 #define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23) 971 #define TRB_TO_SUSPEND_PORT(p) (((p) >> 23) & 0x1) 972 #define LAST_EP_INDEX 30 973 974 /* Set TR Dequeue Pointer command TRB fields. */ 975 #define TRB_TO_STREAM_ID(p) ((((p) & GENMASK(31, 16)) >> 16)) 976 #define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16)) 977 #define SCT_FOR_TRB(p) (((p) << 1) & 0x7) 978 979 /* Link TRB specific fields. */ 980 #define TRB_TC BIT(1) 981 982 /* Port Status Change Event TRB fields. */ 983 /* Port ID - bits 31:24. */ 984 #define GET_PORT_ID(p) (((p) & GENMASK(31, 24)) >> 24) 985 #define SET_PORT_ID(p) (((p) << 24) & GENMASK(31, 24)) 986 #define EVENT_DATA BIT(2) 987 988 /* Normal TRB fields. */ 989 /* transfer_len bitmasks - bits 0:16. */ 990 #define TRB_LEN(p) ((p) & GENMASK(16, 0)) 991 /* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */ 992 #define TRB_TD_SIZE(p) (min((p), (u32)31) << 17) 993 #define GET_TD_SIZE(p) (((p) & GENMASK(21, 17)) >> 17) 994 /* 995 * Controller uses the TD_SIZE field for TBC if Extended TBC 996 * is enabled (ETE). 997 */ 998 #define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17) 999 /* Interrupter Target - which MSI-X vector to target the completion event at. */ 1000 #define TRB_INTR_TARGET(p) (((p) << 22) & GENMASK(31, 22)) 1001 #define GET_INTR_TARGET(p) (((p) & GENMASK(31, 22)) >> 22) 1002 /* 1003 * Total burst count field, Rsvdz on controller with Extended TBC 1004 * enabled (ETE). 1005 */ 1006 #define TRB_TBC(p) (((p) & 0x3) << 7) 1007 #define TRB_TLBPC(p) (((p) & 0xf) << 16) 1008 1009 /* Cycle bit - indicates TRB ownership by driver or driver.*/ 1010 #define TRB_CYCLE BIT(0) 1011 /* 1012 * Force next event data TRB to be evaluated before task switch. 1013 * Used to pass OS data back after a TD completes. 1014 */ 1015 #define TRB_ENT BIT(1) 1016 /* Interrupt on short packet. */ 1017 #define TRB_ISP BIT(2) 1018 /* Set PCIe no snoop attribute. */ 1019 #define TRB_NO_SNOOP BIT(3) 1020 /* Chain multiple TRBs into a TD. */ 1021 #define TRB_CHAIN BIT(4) 1022 /* Interrupt on completion. */ 1023 #define TRB_IOC BIT(5) 1024 /* The buffer pointer contains immediate data. */ 1025 #define TRB_IDT BIT(6) 1026 /* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */ 1027 #define TRB_STAT BIT(7) 1028 /* Block Event Interrupt. */ 1029 #define TRB_BEI BIT(9) 1030 1031 /* Control transfer TRB specific fields. */ 1032 #define TRB_DIR_IN BIT(16) 1033 1034 /* TRB bit mask in Data Stage TRB */ 1035 #define TRB_SETUPID_BITMASK GENMASK(9, 8) 1036 #define TRB_SETUPID(p) ((p) << 8) 1037 #define TRB_SETUPID_TO_TYPE(p) (((p) & TRB_SETUPID_BITMASK) >> 8) 1038 1039 #define TRB_SETUP_SPEEDID_USB3 0x1 1040 #define TRB_SETUP_SPEEDID_USB2 0x0 1041 #define TRB_SETUP_SPEEDID(p) ((p) & (1 << 7)) 1042 1043 #define TRB_SETUPSTAT_ACK 0x1 1044 #define TRB_SETUPSTAT_STALL 0x0 1045 #define TRB_SETUPSTAT(p) ((p) << 6) 1046 1047 /* Isochronous TRB specific fields */ 1048 #define TRB_SIA BIT(31) 1049 #define TRB_FRAME_ID(p) (((p) << 20) & GENMASK(30, 20)) 1050 1051 struct cdnsp_generic_trb { 1052 __le32 field[4]; 1053 }; 1054 1055 union cdnsp_trb { 1056 struct cdnsp_link_trb link; 1057 struct cdnsp_transfer_event trans_event; 1058 struct cdnsp_event_cmd event_cmd; 1059 struct cdnsp_generic_trb generic; 1060 }; 1061 1062 /* TRB bit mask. */ 1063 #define TRB_TYPE_BITMASK GENMASK(15, 10) 1064 #define TRB_TYPE(p) ((p) << 10) 1065 #define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) 1066 1067 /* TRB type IDs. */ 1068 /* bulk, interrupt, isoc scatter/gather, and control data stage. */ 1069 #define TRB_NORMAL 1 1070 /* Setup Stage for control transfers. */ 1071 #define TRB_SETUP 2 1072 /* Data Stage for control transfers. */ 1073 #define TRB_DATA 3 1074 /* Status Stage for control transfers. */ 1075 #define TRB_STATUS 4 1076 /* ISOC transfers. */ 1077 #define TRB_ISOC 5 1078 /* TRB for linking ring segments. */ 1079 #define TRB_LINK 6 1080 #define TRB_EVENT_DATA 7 1081 /* Transfer Ring No-op (not for the command ring). */ 1082 #define TRB_TR_NOOP 8 1083 1084 /* Command TRBs */ 1085 /* Enable Slot Command. */ 1086 #define TRB_ENABLE_SLOT 9 1087 /* Disable Slot Command. */ 1088 #define TRB_DISABLE_SLOT 10 1089 /* Address Device Command. */ 1090 #define TRB_ADDR_DEV 11 1091 /* Configure Endpoint Command. */ 1092 #define TRB_CONFIG_EP 12 1093 /* Evaluate Context Command. */ 1094 #define TRB_EVAL_CONTEXT 13 1095 /* Reset Endpoint Command. */ 1096 #define TRB_RESET_EP 14 1097 /* Stop Transfer Ring Command. */ 1098 #define TRB_STOP_RING 15 1099 /* Set Transfer Ring Dequeue Pointer Command. */ 1100 #define TRB_SET_DEQ 16 1101 /* Reset Device Command. */ 1102 #define TRB_RESET_DEV 17 1103 /* Force Event Command (opt). */ 1104 #define TRB_FORCE_EVENT 18 1105 /* Force Header Command - generate a transaction or link management packet. */ 1106 #define TRB_FORCE_HEADER 22 1107 /* No-op Command - not for transfer rings. */ 1108 #define TRB_CMD_NOOP 23 1109 /* TRB IDs 24-31 reserved. */ 1110 1111 /* Event TRBS. */ 1112 /* Transfer Event. */ 1113 #define TRB_TRANSFER 32 1114 /* Command Completion Event. */ 1115 #define TRB_COMPLETION 33 1116 /* Port Status Change Event. */ 1117 #define TRB_PORT_STATUS 34 1118 /* Device Controller Event. */ 1119 #define TRB_HC_EVENT 37 1120 /* MFINDEX Wrap Event - microframe counter wrapped. */ 1121 #define TRB_MFINDEX_WRAP 39 1122 /* TRB IDs 40-47 reserved. */ 1123 /* Endpoint Not Ready Event. */ 1124 #define TRB_ENDPOINT_NRDY 48 1125 /* TRB IDs 49-53 reserved. */ 1126 /* Halt Endpoint Command. */ 1127 #define TRB_HALT_ENDPOINT 54 1128 /* Doorbell Overflow Event. */ 1129 #define TRB_DRB_OVERFLOW 57 1130 /* Flush Endpoint Command. */ 1131 #define TRB_FLUSH_ENDPOINT 58 1132 1133 #define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)) 1134 #define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ 1135 cpu_to_le32(TRB_TYPE(TRB_LINK))) 1136 #define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ 1137 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP))) 1138 1139 /* 1140 * TRBS_PER_SEGMENT must be a multiple of 4. 1141 * The command ring is 64-byte aligned, so it must also be greater than 16. 1142 */ 1143 #define TRBS_PER_SEGMENT 256 1144 #define TRBS_PER_EVENT_SEGMENT 256 1145 #define TRBS_PER_EV_DEQ_UPDATE 100 1146 #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT * 16) 1147 #define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE)) 1148 /* TRB buffer pointers can't cross 64KB boundaries. */ 1149 #define TRB_MAX_BUFF_SHIFT 16 1150 #define TRB_MAX_BUFF_SIZE BIT(TRB_MAX_BUFF_SHIFT) 1151 /* How much data is left before the 64KB boundary? */ 1152 #define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \ 1153 ((addr) & (TRB_MAX_BUFF_SIZE - 1))) 1154 1155 /** 1156 * struct cdnsp_segment - segment related data. 1157 * @trbs: Array of Transfer Request Blocks. 1158 * @next: Pointer to the next segment. 1159 * @dma: DMA address of current segment. 1160 * @bounce_dma: Bounce buffer DMA address . 1161 * @bounce_buf: Bounce buffer virtual address. 1162 * bounce_offs: Bounce buffer offset. 1163 * bounce_len: Bounce buffer length. 1164 */ 1165 struct cdnsp_segment { 1166 union cdnsp_trb *trbs; 1167 struct cdnsp_segment *next; 1168 dma_addr_t dma; 1169 /* Max packet sized bounce buffer for td-fragmant alignment */ 1170 dma_addr_t bounce_dma; 1171 void *bounce_buf; 1172 unsigned int bounce_offs; 1173 unsigned int bounce_len; 1174 }; 1175 1176 /** 1177 * struct cdnsp_td - Transfer Descriptor object. 1178 * @td_list: Used for binding TD with ep_ring->td_list. 1179 * @preq: Request associated with this TD 1180 * @start_seg: Segment containing the first_trb in TD. 1181 * @first_trb: First TRB for this TD. 1182 * @last_trb: Last TRB related with TD. 1183 * @bounce_seg: Bounce segment for this TD. 1184 * @request_length_set: actual_length of the request has already been set. 1185 * @drbl - TD has been added to HW scheduler - only for stream capable 1186 * endpoints. 1187 */ 1188 struct cdnsp_td { 1189 struct list_head td_list; 1190 struct cdnsp_request *preq; 1191 struct cdnsp_segment *start_seg; 1192 union cdnsp_trb *first_trb; 1193 union cdnsp_trb *last_trb; 1194 struct cdnsp_segment *bounce_seg; 1195 bool request_length_set; 1196 bool drbl; 1197 }; 1198 1199 /** 1200 * struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring. 1201 * @new_deq_seg: New dequeue segment. 1202 * @new_deq_ptr: New dequeue pointer. 1203 * @new_cycle_state: New cycle state. 1204 * @stream_id: stream id for which new dequeue pointer has been selected. 1205 */ 1206 struct cdnsp_dequeue_state { 1207 struct cdnsp_segment *new_deq_seg; 1208 union cdnsp_trb *new_deq_ptr; 1209 int new_cycle_state; 1210 unsigned int stream_id; 1211 }; 1212 1213 enum cdnsp_ring_type { 1214 TYPE_CTRL = 0, 1215 TYPE_ISOC, 1216 TYPE_BULK, 1217 TYPE_INTR, 1218 TYPE_STREAM, 1219 TYPE_COMMAND, 1220 TYPE_EVENT, 1221 }; 1222 1223 /** 1224 * struct cdnsp_ring - information describing transfer, command or event ring. 1225 * @first_seg: First segment on transfer ring. 1226 * @last_seg: Last segment on transfer ring. 1227 * @enqueue: SW enqueue pointer address. 1228 * @enq_seg: SW enqueue segment address. 1229 * @dequeue: SW dequeue pointer address. 1230 * @deq_seg: SW dequeue segment address. 1231 * @td_list: transfer descriptor list associated with this ring. 1232 * @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle 1233 * field to give ownership of the TRB to the device controller 1234 * (if we are the producer) or to check if we own the TRB 1235 * (if we are the consumer). 1236 * @stream_id: Stream id 1237 * @stream_active: Stream is active - PRIME packet has been detected. 1238 * @stream_rejected: This ring has been rejected by host. 1239 * @num_tds: Number of TDs associated with ring. 1240 * @num_segs: Number of segments. 1241 * @num_trbs_free: Number of free TRBs on the ring. 1242 * @bounce_buf_len: Length of bounce buffer. 1243 * @type: Ring type - event, transfer, or command ring. 1244 * @last_td_was_short - TD is short TD. 1245 * @trb_address_map: For mapping physical TRB addresses to segments in 1246 * stream rings. 1247 */ 1248 struct cdnsp_ring { 1249 struct cdnsp_segment *first_seg; 1250 struct cdnsp_segment *last_seg; 1251 union cdnsp_trb *enqueue; 1252 struct cdnsp_segment *enq_seg; 1253 union cdnsp_trb *dequeue; 1254 struct cdnsp_segment *deq_seg; 1255 struct list_head td_list; 1256 u32 cycle_state; 1257 unsigned int stream_id; 1258 unsigned int stream_active; 1259 unsigned int stream_rejected; 1260 int num_tds; 1261 unsigned int num_segs; 1262 unsigned int num_trbs_free; 1263 unsigned int bounce_buf_len; 1264 enum cdnsp_ring_type type; 1265 bool last_td_was_short; 1266 struct radix_tree_root *trb_address_map; 1267 }; 1268 1269 /** 1270 * struct cdnsp_erst_entry - even ring segment table entry object. 1271 * @seg_addr: 64-bit event ring segment address. 1272 * seg_size: Number of TRBs in segment.; 1273 */ 1274 struct cdnsp_erst_entry { 1275 __le64 seg_addr; 1276 __le32 seg_size; 1277 /* Set to zero */ 1278 __le32 rsvd; 1279 }; 1280 1281 /** 1282 * struct cdnsp_erst - even ring segment table for event ring. 1283 * @entries: Array of event ring segments 1284 * @num_entries: Number of segments in entries array. 1285 * @erst_dma_addr: DMA address for entries array. 1286 */ 1287 struct cdnsp_erst { 1288 struct cdnsp_erst_entry *entries; 1289 unsigned int num_entries; 1290 dma_addr_t erst_dma_addr; 1291 }; 1292 1293 /** 1294 * struct cdnsp_request - extended device side representation of usb_request 1295 * object . 1296 * @td: Transfer descriptor associated with this request. 1297 * @request: Generic usb_request object describing single I/O request. 1298 * @list: Used to adding request to endpoint pending_list. 1299 * @pep: Extended representation of usb_ep object 1300 * @epnum: Endpoint number associated with usb request. 1301 * @direction: Endpoint direction for usb request. 1302 */ 1303 struct cdnsp_request { 1304 struct cdnsp_td td; 1305 struct usb_request request; 1306 struct list_head list; 1307 struct cdnsp_ep *pep; 1308 u8 epnum; 1309 unsigned direction:1; 1310 }; 1311 1312 #define ERST_NUM_SEGS 1 1313 1314 /* Stages used during enumeration process.*/ 1315 enum cdnsp_ep0_stage { 1316 CDNSP_SETUP_STAGE, 1317 CDNSP_DATA_STAGE, 1318 CDNSP_STATUS_STAGE, 1319 }; 1320 1321 /** 1322 * struct cdnsp_port - holds information about detected ports. 1323 * @port_num: Port number. 1324 * @exist: Indicate if port exist. 1325 * maj_rev: Major revision. 1326 * min_rev: Minor revision. 1327 */ 1328 struct cdnsp_port { 1329 struct cdnsp_port_regs __iomem *regs; 1330 u8 port_num; 1331 u8 exist; 1332 u8 maj_rev; 1333 u8 min_rev; 1334 }; 1335 1336 #define CDNSP_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) 1337 #define CDNSP_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) 1338 #define CDNSP_EXT_PORT_OFF(x) ((x) & 0xff) 1339 #define CDNSP_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) 1340 1341 /** 1342 * struct cdnsp_device - represent USB device. 1343 * @dev: Pointer to device structure associated whit this controller. 1344 * @gadget: Device side representation of the peripheral controller. 1345 * @gadget_driver: Pointer to the gadget driver. 1346 * @irq: IRQ line number used by device side. 1347 * @regs:IO device memory. 1348 * @cap_regs: Capability registers. 1349 * @op_regs: Operational registers. 1350 * @run_regs: Runtime registers. 1351 * @dba: Device base address register. 1352 * @ir_set: Current interrupter register set. 1353 * @port20_regs: Port 2.0 Peripheral Configuration Registers. 1354 * @port3x_regs: USB3.x Port Peripheral Configuration Registers. 1355 * @rev_cap: Controller Capabilities Registers. 1356 * @hcs_params1: Cached register copies of read-only HCSPARAMS1 1357 * @hcc_params: Cached register copies of read-only HCCPARAMS1 1358 * @setup: Temporary buffer for setup packet. 1359 * @ep0_preq: Internal allocated request used during enumeration. 1360 * @ep0_stage: ep0 stage during enumeration process. 1361 * @three_stage_setup: Three state or two state setup. 1362 * @ep0_expect_in: Data IN expected for control transfer. 1363 * @setup_id: Setup identifier. 1364 * @setup_speed - Speed detected for current SETUP packet. 1365 * @setup_buf: Buffer for SETUP packet. 1366 * @device_address: Current device address. 1367 * @may_wakeup: remote wakeup enabled/disabled. 1368 * @lock: Lock used in interrupt thread context. 1369 * @hci_version: device controller version. 1370 * @dcbaa: Device context base address array. 1371 * @cmd_ring: Command ring. 1372 * @cmd: Represent all what is needed to issue command on Command Ring. 1373 * @event_ring: Event ring. 1374 * @erst: Event Ring Segment table 1375 * @slot_id: Current Slot ID. Should be 0 or 1. 1376 * @out_ctx: Output context. 1377 * @in_ctx: Input context. 1378 * @eps: array of endpoints object associated with device. 1379 * @usb2_hw_lpm_capable: hardware lpm is enabled; 1380 * @u1_allowed: Allow device transition to U1 state. 1381 * @u2_allowed: Allow device transition to U2 state 1382 * @device_pool: DMA pool for allocating input and output context. 1383 * @segment_pool: DMA pool for allocating new segments. 1384 * @cdnsp_state: Current state of controller. 1385 * @link_state: Current link state. 1386 * @usb2_port - Port USB 2.0. 1387 * @usb3_port - Port USB 3.0. 1388 * @active_port - Current selected Port. 1389 * @test_mode: selected Test Mode. 1390 */ 1391 struct cdnsp_device { 1392 struct device *dev; 1393 struct usb_gadget gadget; 1394 struct usb_gadget_driver *gadget_driver; 1395 unsigned int irq; 1396 void __iomem *regs; 1397 1398 /* Registers map */ 1399 struct cdnsp_cap_regs __iomem *cap_regs; 1400 struct cdnsp_op_regs __iomem *op_regs; 1401 struct cdnsp_run_regs __iomem *run_regs; 1402 struct cdnsp_doorbell_array __iomem *dba; 1403 struct cdnsp_intr_reg __iomem *ir_set; 1404 struct cdnsp_20port_cap __iomem *port20_regs; 1405 struct cdnsp_3xport_cap __iomem *port3x_regs; 1406 struct cdnsp_rev_cap __iomem *rev_cap; 1407 1408 /* Cached register copies of read-only CDNSP data */ 1409 __u32 hcs_params1; 1410 __u32 hcs_params3; 1411 __u32 hcc_params; 1412 /* Lock used in interrupt thread context. */ 1413 spinlock_t lock; 1414 struct usb_ctrlrequest setup; 1415 struct cdnsp_request ep0_preq; 1416 enum cdnsp_ep0_stage ep0_stage; 1417 u8 three_stage_setup; 1418 u8 ep0_expect_in; 1419 u8 setup_id; 1420 u8 setup_speed; 1421 void *setup_buf; 1422 u8 device_address; 1423 int may_wakeup; 1424 u16 hci_version; 1425 1426 /* data structures */ 1427 struct cdnsp_device_context_array *dcbaa; 1428 struct cdnsp_ring *cmd_ring; 1429 struct cdnsp_command cmd; 1430 struct cdnsp_ring *event_ring; 1431 struct cdnsp_erst erst; 1432 int slot_id; 1433 1434 /* 1435 * Commands to the hardware are passed an "input context" that 1436 * tells the hardware what to change in its data structures. 1437 * The hardware will return changes in an "output context" that 1438 * software must allocate for the hardware. . 1439 */ 1440 struct cdnsp_container_ctx out_ctx; 1441 struct cdnsp_container_ctx in_ctx; 1442 struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM]; 1443 u8 usb2_hw_lpm_capable:1; 1444 u8 u1_allowed:1; 1445 u8 u2_allowed:1; 1446 1447 /* DMA pools */ 1448 struct dma_pool *device_pool; 1449 struct dma_pool *segment_pool; 1450 1451 #define CDNSP_STATE_HALTED BIT(1) 1452 #define CDNSP_STATE_DYING BIT(2) 1453 #define CDNSP_STATE_DISCONNECT_PENDING BIT(3) 1454 #define CDNSP_WAKEUP_PENDING BIT(4) 1455 unsigned int cdnsp_state; 1456 unsigned int link_state; 1457 1458 struct cdnsp_port usb2_port; 1459 struct cdnsp_port usb3_port; 1460 struct cdnsp_port *active_port; 1461 u16 test_mode; 1462 }; 1463 1464 /* 1465 * Registers should always be accessed with double word or quad word accesses. 1466 * 1467 * Registers with 64-bit address pointers should be written to with 1468 * dword accesses by writing the low dword first (ptr[0]), then the high dword 1469 * (ptr[1]) second. controller implementations that do not support 64-bit 1470 * address pointers will ignore the high dword, and write order is irrelevant. 1471 */ 1472 static inline u64 cdnsp_read_64(__le64 __iomem *regs) 1473 { 1474 return lo_hi_readq(regs); 1475 } 1476 1477 static inline void cdnsp_write_64(const u64 val, __le64 __iomem *regs) 1478 { 1479 lo_hi_writeq(val, regs); 1480 } 1481 1482 /* CDNSP memory management functions. */ 1483 void cdnsp_mem_cleanup(struct cdnsp_device *pdev); 1484 int cdnsp_mem_init(struct cdnsp_device *pdev); 1485 int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev); 1486 void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev); 1487 void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *ep); 1488 int cdnsp_endpoint_init(struct cdnsp_device *pdev, 1489 struct cdnsp_ep *pep, 1490 gfp_t mem_flags); 1491 int cdnsp_ring_expansion(struct cdnsp_device *pdev, 1492 struct cdnsp_ring *ring, 1493 unsigned int num_trbs, gfp_t flags); 1494 struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *ep, u64 address); 1495 int cdnsp_alloc_stream_info(struct cdnsp_device *pdev, 1496 struct cdnsp_ep *pep, 1497 unsigned int num_stream_ctxs, 1498 unsigned int num_streams); 1499 int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep); 1500 void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep); 1501 1502 /* Device controller glue. */ 1503 int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id); 1504 int cdnsp_halt(struct cdnsp_device *pdev); 1505 void cdnsp_died(struct cdnsp_device *pdev); 1506 int cdnsp_reset(struct cdnsp_device *pdev); 1507 irqreturn_t cdnsp_irq_handler(int irq, void *priv); 1508 int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup); 1509 void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *usbsssp_data, 1510 struct usb_request *req, int enable); 1511 irqreturn_t cdnsp_thread_irq_handler(int irq, void *data); 1512 1513 /* Ring, segment, TRB, and TD functions. */ 1514 dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg, 1515 union cdnsp_trb *trb); 1516 bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb); 1517 bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring, 1518 struct cdnsp_segment *seg, 1519 union cdnsp_trb *trb); 1520 int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev); 1521 void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev, 1522 union cdnsp_trb *event_ring_deq, 1523 u8 clear_ehb); 1524 void cdnsp_initialize_ring_info(struct cdnsp_ring *ring); 1525 void cdnsp_ring_cmd_db(struct cdnsp_device *pdev); 1526 void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type); 1527 void cdnsp_queue_address_device(struct cdnsp_device *pdev, 1528 dma_addr_t in_ctx_ptr, 1529 enum cdnsp_setup_dev setup); 1530 void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev, 1531 unsigned int ep_index); 1532 int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq); 1533 int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq); 1534 int cdnsp_queue_isoc_tx_prepare(struct cdnsp_device *pdev, 1535 struct cdnsp_request *preq); 1536 void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev, 1537 dma_addr_t in_ctx_ptr); 1538 void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index); 1539 void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, 1540 unsigned int ep_index); 1541 void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev, 1542 unsigned int ep_index); 1543 void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num); 1544 void cdnsp_queue_reset_device(struct cdnsp_device *pdev); 1545 void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev, 1546 struct cdnsp_ep *pep, 1547 struct cdnsp_dequeue_state *deq_state); 1548 void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev, 1549 struct cdnsp_ep *pep); 1550 void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring); 1551 void cdnsp_set_link_state(struct cdnsp_device *pdev, 1552 __le32 __iomem *port_regs, u32 link_state); 1553 u32 cdnsp_port_state_to_neutral(u32 state); 1554 1555 /* CDNSP device controller contexts. */ 1556 int cdnsp_enable_slot(struct cdnsp_device *pdev); 1557 int cdnsp_disable_slot(struct cdnsp_device *pdev); 1558 struct cdnsp_input_control_ctx 1559 *cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx); 1560 struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx); 1561 struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx, 1562 unsigned int ep_index); 1563 /* CDNSP gadget interface. */ 1564 void cdnsp_suspend_gadget(struct cdnsp_device *pdev); 1565 void cdnsp_resume_gadget(struct cdnsp_device *pdev); 1566 void cdnsp_disconnect_gadget(struct cdnsp_device *pdev); 1567 void cdnsp_gadget_giveback(struct cdnsp_ep *pep, struct cdnsp_request *preq, 1568 int status); 1569 int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq); 1570 int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq); 1571 unsigned int cdnsp_port_speed(unsigned int port_status); 1572 void cdnsp_irq_reset(struct cdnsp_device *pdev); 1573 int cdnsp_halt_endpoint(struct cdnsp_device *pdev, 1574 struct cdnsp_ep *pep, int value); 1575 int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep); 1576 int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep); 1577 void cdnsp_setup_analyze(struct cdnsp_device *pdev); 1578 int cdnsp_status_stage(struct cdnsp_device *pdev); 1579 int cdnsp_reset_device(struct cdnsp_device *pdev); 1580 1581 /** 1582 * next_request - gets the next request on the given list 1583 * @list: the request list to operate on 1584 * 1585 * Caller should take care of locking. This function return NULL or the first 1586 * request available on list. 1587 */ 1588 static inline struct cdnsp_request *next_request(struct list_head *list) 1589 { 1590 return list_first_entry_or_null(list, struct cdnsp_request, list); 1591 } 1592 1593 #define to_cdnsp_ep(ep) (container_of(ep, struct cdnsp_ep, endpoint)) 1594 #define gadget_to_cdnsp(g) (container_of(g, struct cdnsp_device, gadget)) 1595 #define request_to_cdnsp_request(r) (container_of(r, struct cdnsp_request, \ 1596 request)) 1597 #define to_cdnsp_request(r) (container_of(r, struct cdnsp_request, request)) 1598 int cdnsp_remove_request(struct cdnsp_device *pdev, struct cdnsp_request *preq, 1599 struct cdnsp_ep *pep); 1600 1601 #endif /* __LINUX_CDNSP_GADGET_H */ 1602