1 /****************************************************************************** 2 * speedtch.c - Alcatel SpeedTouch USB xDSL modem driver 3 * 4 * Copyright (C) 2001, Alcatel 5 * Copyright (C) 2003, Duncan Sands 6 * Copyright (C) 2004, David Woodhouse 7 * 8 * Based on "modem_run.c", copyright (C) 2001, Benoit Papillault 9 * 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the Free 12 * Software Foundation; either version 2 of the License, or (at your option) 13 * any later version. 14 * 15 * This program is distributed in the hope that it will be useful, but WITHOUT 16 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 17 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 18 * more details. 19 * 20 * You should have received a copy of the GNU General Public License along with 21 * this program; if not, write to the Free Software Foundation, Inc., 59 22 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. 23 * 24 ******************************************************************************/ 25 26 #include <asm/page.h> 27 #include <linux/device.h> 28 #include <linux/errno.h> 29 #include <linux/firmware.h> 30 #include <linux/kernel.h> 31 #include <linux/module.h> 32 #include <linux/moduleparam.h> 33 #include <linux/slab.h> 34 #include <linux/stat.h> 35 #include <linux/timer.h> 36 #include <linux/types.h> 37 #include <linux/usb/ch9.h> 38 #include <linux/workqueue.h> 39 40 #include "usbatm.h" 41 42 #define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>" 43 #define DRIVER_VERSION "1.10" 44 #define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION 45 46 static const char speedtch_driver_name[] = "speedtch"; 47 48 #define CTRL_TIMEOUT 2000 /* milliseconds */ 49 #define DATA_TIMEOUT 2000 /* milliseconds */ 50 51 #define OFFSET_7 0 /* size 1 */ 52 #define OFFSET_b 1 /* size 8 */ 53 #define OFFSET_d 9 /* size 4 */ 54 #define OFFSET_e 13 /* size 1 */ 55 #define OFFSET_f 14 /* size 1 */ 56 57 #define SIZE_7 1 58 #define SIZE_b 8 59 #define SIZE_d 4 60 #define SIZE_e 1 61 #define SIZE_f 1 62 63 #define MIN_POLL_DELAY 5000 /* milliseconds */ 64 #define MAX_POLL_DELAY 60000 /* milliseconds */ 65 66 #define RESUBMIT_DELAY 1000 /* milliseconds */ 67 68 #define DEFAULT_BULK_ALTSETTING 1 69 #define DEFAULT_ISOC_ALTSETTING 3 70 #define DEFAULT_DL_512_FIRST 0 71 #define DEFAULT_ENABLE_ISOC 0 72 #define DEFAULT_SW_BUFFERING 0 73 74 static unsigned int altsetting = 0; /* zero means: use the default */ 75 static bool dl_512_first = DEFAULT_DL_512_FIRST; 76 static bool enable_isoc = DEFAULT_ENABLE_ISOC; 77 static bool sw_buffering = DEFAULT_SW_BUFFERING; 78 79 #define DEFAULT_B_MAX_DSL 8128 80 #define DEFAULT_MODEM_MODE 11 81 #define MODEM_OPTION_LENGTH 16 82 static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = { 83 0x10, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 84 }; 85 86 static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL; 87 static unsigned char ModemMode = DEFAULT_MODEM_MODE; 88 static unsigned char ModemOption[MODEM_OPTION_LENGTH]; 89 static unsigned int num_ModemOption; 90 91 module_param(altsetting, uint, S_IRUGO | S_IWUSR); 92 MODULE_PARM_DESC(altsetting, 93 "Alternative setting for data interface (bulk_default: " 94 __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: " 95 __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")"); 96 97 module_param(dl_512_first, bool, S_IRUGO | S_IWUSR); 98 MODULE_PARM_DESC(dl_512_first, 99 "Read 512 bytes before sending firmware (default: " 100 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")"); 101 102 module_param(enable_isoc, bool, S_IRUGO | S_IWUSR); 103 MODULE_PARM_DESC(enable_isoc, 104 "Use isochronous transfers if available (default: " 105 __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")"); 106 107 module_param(sw_buffering, bool, S_IRUGO | S_IWUSR); 108 MODULE_PARM_DESC(sw_buffering, 109 "Enable software buffering (default: " 110 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")"); 111 112 module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR); 113 MODULE_PARM_DESC(BMaxDSL, 114 "default: " __MODULE_STRING(DEFAULT_B_MAX_DSL)); 115 116 module_param(ModemMode, byte, S_IRUGO | S_IWUSR); 117 MODULE_PARM_DESC(ModemMode, 118 "default: " __MODULE_STRING(DEFAULT_MODEM_MODE)); 119 120 module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO); 121 MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20"); 122 123 #define INTERFACE_DATA 1 124 #define ENDPOINT_INT 0x81 125 #define ENDPOINT_BULK_DATA 0x07 126 #define ENDPOINT_ISOC_DATA 0x07 127 #define ENDPOINT_FIRMWARE 0x05 128 129 struct speedtch_params { 130 unsigned int altsetting; 131 unsigned int BMaxDSL; 132 unsigned char ModemMode; 133 unsigned char ModemOption[MODEM_OPTION_LENGTH]; 134 }; 135 136 struct speedtch_instance_data { 137 struct usbatm_data *usbatm; 138 139 struct speedtch_params params; /* set in probe, constant afterwards */ 140 141 struct timer_list status_check_timer; 142 struct work_struct status_check_work; 143 144 unsigned char last_status; 145 146 int poll_delay; /* milliseconds */ 147 148 struct timer_list resubmit_timer; 149 struct urb *int_urb; 150 unsigned char int_data[16]; 151 152 unsigned char scratch_buffer[16]; 153 }; 154 155 /*************** 156 ** firmware ** 157 ***************/ 158 159 static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state) 160 { 161 struct usbatm_data *usbatm = instance->usbatm; 162 struct usb_device *usb_dev = usbatm->usb_dev; 163 int ret; 164 165 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 166 0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT); 167 if (ret < 0) 168 usb_warn(usbatm, 169 "%sabling SW buffering: usb_control_msg returned %d\n", 170 state ? "En" : "Dis", ret); 171 else 172 usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis"); 173 } 174 175 static void speedtch_test_sequence(struct speedtch_instance_data *instance) 176 { 177 struct usbatm_data *usbatm = instance->usbatm; 178 struct usb_device *usb_dev = usbatm->usb_dev; 179 unsigned char *buf = instance->scratch_buffer; 180 int ret; 181 182 /* URB 147 */ 183 buf[0] = 0x1c; 184 buf[1] = 0x50; 185 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 186 0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT); 187 if (ret < 0) 188 usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret); 189 190 /* URB 148 */ 191 buf[0] = 0x32; 192 buf[1] = 0x00; 193 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 194 0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT); 195 if (ret < 0) 196 usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret); 197 198 /* URB 149 */ 199 buf[0] = 0x01; 200 buf[1] = 0x00; 201 buf[2] = 0x01; 202 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 203 0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT); 204 if (ret < 0) 205 usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret); 206 207 /* URB 150 */ 208 buf[0] = 0x01; 209 buf[1] = 0x00; 210 buf[2] = 0x01; 211 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 212 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT); 213 if (ret < 0) 214 usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret); 215 216 /* Extra initialisation in recent drivers - gives higher speeds */ 217 218 /* URBext1 */ 219 buf[0] = instance->params.ModemMode; 220 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 221 0x01, 0x40, 0x11, 0x00, buf, 1, CTRL_TIMEOUT); 222 if (ret < 0) 223 usb_warn(usbatm, "%s failed on URBext1: %d\n", __func__, ret); 224 225 /* URBext2 */ 226 /* This seems to be the one which actually triggers the higher sync 227 rate -- it does require the new firmware too, although it works OK 228 with older firmware */ 229 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 230 0x01, 0x40, 0x14, 0x00, 231 instance->params.ModemOption, 232 MODEM_OPTION_LENGTH, CTRL_TIMEOUT); 233 if (ret < 0) 234 usb_warn(usbatm, "%s failed on URBext2: %d\n", __func__, ret); 235 236 /* URBext3 */ 237 buf[0] = instance->params.BMaxDSL & 0xff; 238 buf[1] = instance->params.BMaxDSL >> 8; 239 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 240 0x01, 0x40, 0x12, 0x00, buf, 2, CTRL_TIMEOUT); 241 if (ret < 0) 242 usb_warn(usbatm, "%s failed on URBext3: %d\n", __func__, ret); 243 } 244 245 static int speedtch_upload_firmware(struct speedtch_instance_data *instance, 246 const struct firmware *fw1, 247 const struct firmware *fw2) 248 { 249 unsigned char *buffer; 250 struct usbatm_data *usbatm = instance->usbatm; 251 struct usb_device *usb_dev = usbatm->usb_dev; 252 int actual_length; 253 int ret = 0; 254 int offset; 255 256 usb_dbg(usbatm, "%s entered\n", __func__); 257 258 buffer = (unsigned char *)__get_free_page(GFP_KERNEL); 259 if (!buffer) { 260 ret = -ENOMEM; 261 usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__); 262 goto out; 263 } 264 265 if (!usb_ifnum_to_if(usb_dev, 2)) { 266 ret = -ENODEV; 267 usb_dbg(usbatm, "%s: interface not found!\n", __func__); 268 goto out_free; 269 } 270 271 /* URB 7 */ 272 if (dl_512_first) { /* some modems need a read before writing the firmware */ 273 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 274 buffer, 0x200, &actual_length, 2000); 275 276 if (ret < 0 && ret != -ETIMEDOUT) 277 usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret); 278 else 279 usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret); 280 } 281 282 /* URB 8 : both leds are static green */ 283 for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) { 284 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset); 285 memcpy(buffer, fw1->data + offset, thislen); 286 287 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 288 buffer, thislen, &actual_length, DATA_TIMEOUT); 289 290 if (ret < 0) { 291 usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret); 292 goto out_free; 293 } 294 usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size); 295 } 296 297 /* USB led blinking green, ADSL led off */ 298 299 /* URB 11 */ 300 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 301 buffer, 0x200, &actual_length, DATA_TIMEOUT); 302 303 if (ret < 0) { 304 usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret); 305 goto out_free; 306 } 307 usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length); 308 309 /* URBs 12 to 139 - USB led blinking green, ADSL led off */ 310 for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) { 311 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset); 312 memcpy(buffer, fw2->data + offset, thislen); 313 314 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 315 buffer, thislen, &actual_length, DATA_TIMEOUT); 316 317 if (ret < 0) { 318 usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret); 319 goto out_free; 320 } 321 } 322 usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size); 323 324 /* USB led static green, ADSL led static red */ 325 326 /* URB 142 */ 327 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 328 buffer, 0x200, &actual_length, DATA_TIMEOUT); 329 330 if (ret < 0) { 331 usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret); 332 goto out_free; 333 } 334 335 /* success */ 336 usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length); 337 338 /* Delay to allow firmware to start up. We can do this here 339 because we're in our own kernel thread anyway. */ 340 msleep_interruptible(1000); 341 342 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) { 343 usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret); 344 goto out_free; 345 } 346 347 /* Enable software buffering, if requested */ 348 if (sw_buffering) 349 speedtch_set_swbuff(instance, 1); 350 351 /* Magic spell; don't ask us what this does */ 352 speedtch_test_sequence(instance); 353 354 ret = 0; 355 356 out_free: 357 free_page((unsigned long)buffer); 358 out: 359 return ret; 360 } 361 362 static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf, 363 int phase, const struct firmware **fw_p) 364 { 365 struct device *dev = &intf->dev; 366 const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice); 367 const u8 major_revision = bcdDevice >> 8; 368 const u8 minor_revision = bcdDevice & 0xff; 369 char buf[24]; 370 371 sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision); 372 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); 373 374 if (request_firmware(fw_p, buf, dev)) { 375 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision); 376 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); 377 378 if (request_firmware(fw_p, buf, dev)) { 379 sprintf(buf, "speedtch-%d.bin", phase); 380 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); 381 382 if (request_firmware(fw_p, buf, dev)) { 383 usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase); 384 return -ENOENT; 385 } 386 } 387 } 388 389 usb_info(usbatm, "found stage %d firmware %s\n", phase, buf); 390 391 return 0; 392 } 393 394 static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf) 395 { 396 const struct firmware *fw1, *fw2; 397 struct speedtch_instance_data *instance = usbatm->driver_data; 398 int ret; 399 400 if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0) 401 return ret; 402 403 if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) { 404 release_firmware(fw1); 405 return ret; 406 } 407 408 if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0) 409 usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret); 410 411 release_firmware(fw2); 412 release_firmware(fw1); 413 414 return ret; 415 } 416 417 418 /********** 419 ** ATM ** 420 **********/ 421 422 static int speedtch_read_status(struct speedtch_instance_data *instance) 423 { 424 struct usbatm_data *usbatm = instance->usbatm; 425 struct usb_device *usb_dev = usbatm->usb_dev; 426 unsigned char *buf = instance->scratch_buffer; 427 int ret; 428 429 memset(buf, 0, 16); 430 431 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 432 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7, 433 CTRL_TIMEOUT); 434 if (ret < 0) { 435 atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__); 436 return ret; 437 } 438 439 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 440 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b, 441 CTRL_TIMEOUT); 442 if (ret < 0) { 443 atm_dbg(usbatm, "%s: MSG B failed\n", __func__); 444 return ret; 445 } 446 447 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 448 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d, 449 CTRL_TIMEOUT); 450 if (ret < 0) { 451 atm_dbg(usbatm, "%s: MSG D failed\n", __func__); 452 return ret; 453 } 454 455 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 456 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e, 457 CTRL_TIMEOUT); 458 if (ret < 0) { 459 atm_dbg(usbatm, "%s: MSG E failed\n", __func__); 460 return ret; 461 } 462 463 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 464 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f, 465 CTRL_TIMEOUT); 466 if (ret < 0) { 467 atm_dbg(usbatm, "%s: MSG F failed\n", __func__); 468 return ret; 469 } 470 471 return 0; 472 } 473 474 static int speedtch_start_synchro(struct speedtch_instance_data *instance) 475 { 476 struct usbatm_data *usbatm = instance->usbatm; 477 struct usb_device *usb_dev = usbatm->usb_dev; 478 unsigned char *buf = instance->scratch_buffer; 479 int ret; 480 481 atm_dbg(usbatm, "%s entered\n", __func__); 482 483 memset(buf, 0, 2); 484 485 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 486 0x12, 0xc0, 0x04, 0x00, 487 buf, 2, CTRL_TIMEOUT); 488 489 if (ret < 0) 490 atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret); 491 else 492 atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n", 493 __func__, ret, buf[0], buf[1]); 494 495 return ret; 496 } 497 498 static void speedtch_check_status(struct work_struct *work) 499 { 500 struct speedtch_instance_data *instance = 501 container_of(work, struct speedtch_instance_data, 502 status_check_work); 503 struct usbatm_data *usbatm = instance->usbatm; 504 struct atm_dev *atm_dev = usbatm->atm_dev; 505 unsigned char *buf = instance->scratch_buffer; 506 int down_speed, up_speed, ret; 507 unsigned char status; 508 509 #ifdef VERBOSE_DEBUG 510 atm_dbg(usbatm, "%s entered\n", __func__); 511 #endif 512 513 ret = speedtch_read_status(instance); 514 if (ret < 0) { 515 atm_warn(usbatm, "error %d fetching device status\n", ret); 516 instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY); 517 return; 518 } 519 520 instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY); 521 522 status = buf[OFFSET_7]; 523 524 if ((status != instance->last_status) || !status) { 525 atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status); 526 527 switch (status) { 528 case 0: 529 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 530 if (instance->last_status) 531 atm_info(usbatm, "ADSL line is down\n"); 532 /* It may never resync again unless we ask it to... */ 533 ret = speedtch_start_synchro(instance); 534 break; 535 536 case 0x08: 537 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN); 538 atm_info(usbatm, "ADSL line is blocked?\n"); 539 break; 540 541 case 0x10: 542 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 543 atm_info(usbatm, "ADSL line is synchronising\n"); 544 break; 545 546 case 0x20: 547 down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8) 548 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24); 549 up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8) 550 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24); 551 552 if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) { 553 down_speed >>= 16; 554 up_speed >>= 16; 555 } 556 557 atm_dev->link_rate = down_speed * 1000 / 424; 558 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND); 559 560 atm_info(usbatm, 561 "ADSL line is up (%d kb/s down | %d kb/s up)\n", 562 down_speed, up_speed); 563 break; 564 565 default: 566 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN); 567 atm_info(usbatm, "unknown line state %02x\n", status); 568 break; 569 } 570 571 instance->last_status = status; 572 } 573 } 574 575 static void speedtch_status_poll(unsigned long data) 576 { 577 struct speedtch_instance_data *instance = (void *)data; 578 579 schedule_work(&instance->status_check_work); 580 581 /* The following check is racy, but the race is harmless */ 582 if (instance->poll_delay < MAX_POLL_DELAY) 583 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay)); 584 else 585 atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n"); 586 } 587 588 static void speedtch_resubmit_int(unsigned long data) 589 { 590 struct speedtch_instance_data *instance = (void *)data; 591 struct urb *int_urb = instance->int_urb; 592 int ret; 593 594 atm_dbg(instance->usbatm, "%s entered\n", __func__); 595 596 if (int_urb) { 597 ret = usb_submit_urb(int_urb, GFP_ATOMIC); 598 if (!ret) 599 schedule_work(&instance->status_check_work); 600 else { 601 atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret); 602 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY)); 603 } 604 } 605 } 606 607 static void speedtch_handle_int(struct urb *int_urb) 608 { 609 struct speedtch_instance_data *instance = int_urb->context; 610 struct usbatm_data *usbatm = instance->usbatm; 611 unsigned int count = int_urb->actual_length; 612 int status = int_urb->status; 613 int ret; 614 615 /* The magic interrupt for "up state" */ 616 static const unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 }; 617 /* The magic interrupt for "down state" */ 618 static const unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 }; 619 620 atm_dbg(usbatm, "%s entered\n", __func__); 621 622 if (status < 0) { 623 atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, status); 624 goto fail; 625 } 626 627 if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) { 628 del_timer(&instance->status_check_timer); 629 atm_info(usbatm, "DSL line goes up\n"); 630 } else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) { 631 atm_info(usbatm, "DSL line goes down\n"); 632 } else { 633 int i; 634 635 atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count); 636 for (i = 0; i < count; i++) 637 printk(" %02x", instance->int_data[i]); 638 printk("\n"); 639 goto fail; 640 } 641 642 int_urb = instance->int_urb; 643 if (int_urb) { 644 ret = usb_submit_urb(int_urb, GFP_ATOMIC); 645 schedule_work(&instance->status_check_work); 646 if (ret < 0) { 647 atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret); 648 goto fail; 649 } 650 } 651 652 return; 653 654 fail: 655 int_urb = instance->int_urb; 656 if (int_urb) 657 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY)); 658 } 659 660 static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev) 661 { 662 struct usb_device *usb_dev = usbatm->usb_dev; 663 struct speedtch_instance_data *instance = usbatm->driver_data; 664 int i, ret; 665 unsigned char mac_str[13]; 666 667 atm_dbg(usbatm, "%s entered\n", __func__); 668 669 /* Set MAC address, it is stored in the serial number */ 670 memset(atm_dev->esi, 0, sizeof(atm_dev->esi)); 671 if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) { 672 for (i = 0; i < 6; i++) 673 atm_dev->esi[i] = (hex_to_bin(mac_str[i * 2]) << 4) + 674 hex_to_bin(mac_str[i * 2 + 1]); 675 } 676 677 /* Start modem synchronisation */ 678 ret = speedtch_start_synchro(instance); 679 680 /* Set up interrupt endpoint */ 681 if (instance->int_urb) { 682 ret = usb_submit_urb(instance->int_urb, GFP_KERNEL); 683 if (ret < 0) { 684 /* Doesn't matter; we'll poll anyway */ 685 atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret); 686 usb_free_urb(instance->int_urb); 687 instance->int_urb = NULL; 688 } 689 } 690 691 /* Start status polling */ 692 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000)); 693 694 return 0; 695 } 696 697 static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev) 698 { 699 struct speedtch_instance_data *instance = usbatm->driver_data; 700 struct urb *int_urb = instance->int_urb; 701 702 atm_dbg(usbatm, "%s entered\n", __func__); 703 704 del_timer_sync(&instance->status_check_timer); 705 706 /* 707 * Since resubmit_timer and int_urb can schedule themselves and 708 * each other, shutting them down correctly takes some care 709 */ 710 instance->int_urb = NULL; /* signal shutdown */ 711 mb(); 712 usb_kill_urb(int_urb); 713 del_timer_sync(&instance->resubmit_timer); 714 /* 715 * At this point, speedtch_handle_int and speedtch_resubmit_int 716 * can run or be running, but instance->int_urb == NULL means that 717 * they will not reschedule 718 */ 719 usb_kill_urb(int_urb); 720 del_timer_sync(&instance->resubmit_timer); 721 usb_free_urb(int_urb); 722 723 flush_work(&instance->status_check_work); 724 } 725 726 static int speedtch_pre_reset(struct usb_interface *intf) 727 { 728 return 0; 729 } 730 731 static int speedtch_post_reset(struct usb_interface *intf) 732 { 733 return 0; 734 } 735 736 737 /********** 738 ** USB ** 739 **********/ 740 741 static struct usb_device_id speedtch_usb_ids[] = { 742 {USB_DEVICE(0x06b9, 0x4061)}, 743 {} 744 }; 745 746 MODULE_DEVICE_TABLE(usb, speedtch_usb_ids); 747 748 static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *); 749 750 static struct usb_driver speedtch_usb_driver = { 751 .name = speedtch_driver_name, 752 .probe = speedtch_usb_probe, 753 .disconnect = usbatm_usb_disconnect, 754 .pre_reset = speedtch_pre_reset, 755 .post_reset = speedtch_post_reset, 756 .id_table = speedtch_usb_ids 757 }; 758 759 static void speedtch_release_interfaces(struct usb_device *usb_dev, 760 int num_interfaces) 761 { 762 struct usb_interface *cur_intf; 763 int i; 764 765 for (i = 0; i < num_interfaces; i++) { 766 cur_intf = usb_ifnum_to_if(usb_dev, i); 767 if (cur_intf) { 768 usb_set_intfdata(cur_intf, NULL); 769 usb_driver_release_interface(&speedtch_usb_driver, cur_intf); 770 } 771 } 772 } 773 774 static int speedtch_bind(struct usbatm_data *usbatm, 775 struct usb_interface *intf, 776 const struct usb_device_id *id) 777 { 778 struct usb_device *usb_dev = interface_to_usbdev(intf); 779 struct usb_interface *cur_intf, *data_intf; 780 struct speedtch_instance_data *instance; 781 int ifnum = intf->altsetting->desc.bInterfaceNumber; 782 int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces; 783 int i, ret; 784 int use_isoc; 785 786 usb_dbg(usbatm, "%s entered\n", __func__); 787 788 /* sanity checks */ 789 790 if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) { 791 usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass); 792 return -ENODEV; 793 } 794 795 data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA); 796 if (!data_intf) { 797 usb_err(usbatm, "%s: data interface not found!\n", __func__); 798 return -ENODEV; 799 } 800 801 /* claim all interfaces */ 802 803 for (i = 0; i < num_interfaces; i++) { 804 cur_intf = usb_ifnum_to_if(usb_dev, i); 805 806 if ((i != ifnum) && cur_intf) { 807 ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm); 808 809 if (ret < 0) { 810 usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret); 811 speedtch_release_interfaces(usb_dev, i); 812 return ret; 813 } 814 } 815 } 816 817 instance = kzalloc(sizeof(*instance), GFP_KERNEL); 818 819 if (!instance) { 820 ret = -ENOMEM; 821 goto fail_release; 822 } 823 824 instance->usbatm = usbatm; 825 826 /* module parameters may change at any moment, so take a snapshot */ 827 instance->params.altsetting = altsetting; 828 instance->params.BMaxDSL = BMaxDSL; 829 instance->params.ModemMode = ModemMode; 830 memcpy(instance->params.ModemOption, DEFAULT_MODEM_OPTION, MODEM_OPTION_LENGTH); 831 memcpy(instance->params.ModemOption, ModemOption, num_ModemOption); 832 use_isoc = enable_isoc; 833 834 if (instance->params.altsetting) 835 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) { 836 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->params.altsetting, ret); 837 instance->params.altsetting = 0; /* fall back to default */ 838 } 839 840 if (!instance->params.altsetting && use_isoc) 841 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) { 842 usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret); 843 use_isoc = 0; /* fall back to bulk */ 844 } 845 846 if (use_isoc) { 847 const struct usb_host_interface *desc = data_intf->cur_altsetting; 848 const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in; 849 850 use_isoc = 0; /* fall back to bulk if endpoint not found */ 851 852 for (i = 0; i < desc->desc.bNumEndpoints; i++) { 853 const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; 854 855 if ((endpoint_desc->bEndpointAddress == target_address)) { 856 use_isoc = 857 usb_endpoint_xfer_isoc(endpoint_desc); 858 break; 859 } 860 } 861 862 if (!use_isoc) 863 usb_info(usbatm, "isochronous transfer not supported - using bulk\n"); 864 } 865 866 if (!use_isoc && !instance->params.altsetting) 867 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) { 868 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret); 869 goto fail_free; 870 } 871 872 if (!instance->params.altsetting) 873 instance->params.altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING; 874 875 usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0); 876 877 INIT_WORK(&instance->status_check_work, speedtch_check_status); 878 init_timer(&instance->status_check_timer); 879 880 instance->status_check_timer.function = speedtch_status_poll; 881 instance->status_check_timer.data = (unsigned long)instance; 882 instance->last_status = 0xff; 883 instance->poll_delay = MIN_POLL_DELAY; 884 885 init_timer(&instance->resubmit_timer); 886 instance->resubmit_timer.function = speedtch_resubmit_int; 887 instance->resubmit_timer.data = (unsigned long)instance; 888 889 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL); 890 891 if (instance->int_urb) 892 usb_fill_int_urb(instance->int_urb, usb_dev, 893 usb_rcvintpipe(usb_dev, ENDPOINT_INT), 894 instance->int_data, sizeof(instance->int_data), 895 speedtch_handle_int, instance, 16); 896 else 897 usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__); 898 899 /* check whether the modem already seems to be alive */ 900 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 901 0x12, 0xc0, 0x07, 0x00, 902 instance->scratch_buffer + OFFSET_7, SIZE_7, 500); 903 904 usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0); 905 906 usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not"); 907 908 if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT)) 909 if ((ret = usb_reset_device(usb_dev)) < 0) { 910 usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret); 911 goto fail_free; 912 } 913 914 usbatm->driver_data = instance; 915 916 return 0; 917 918 fail_free: 919 usb_free_urb(instance->int_urb); 920 kfree(instance); 921 fail_release: 922 speedtch_release_interfaces(usb_dev, num_interfaces); 923 return ret; 924 } 925 926 static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) 927 { 928 struct usb_device *usb_dev = interface_to_usbdev(intf); 929 struct speedtch_instance_data *instance = usbatm->driver_data; 930 931 usb_dbg(usbatm, "%s entered\n", __func__); 932 933 speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces); 934 usb_free_urb(instance->int_urb); 935 kfree(instance); 936 } 937 938 939 /*********** 940 ** init ** 941 ***********/ 942 943 static struct usbatm_driver speedtch_usbatm_driver = { 944 .driver_name = speedtch_driver_name, 945 .bind = speedtch_bind, 946 .heavy_init = speedtch_heavy_init, 947 .unbind = speedtch_unbind, 948 .atm_start = speedtch_atm_start, 949 .atm_stop = speedtch_atm_stop, 950 .bulk_in = ENDPOINT_BULK_DATA, 951 .bulk_out = ENDPOINT_BULK_DATA, 952 .isoc_in = ENDPOINT_ISOC_DATA 953 }; 954 955 static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) 956 { 957 return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver); 958 } 959 960 module_usb_driver(speedtch_usb_driver); 961 962 MODULE_AUTHOR(DRIVER_AUTHOR); 963 MODULE_DESCRIPTION(DRIVER_DESC); 964 MODULE_LICENSE("GPL"); 965 MODULE_VERSION(DRIVER_VERSION); 966