1# 2# USB/ATM DSL configuration 3# 4 5menuconfig USB_ATM 6 tristate "USB DSL modem support" 7 depends on USB && ATM 8 select CRC32 9 default n 10 help 11 Say Y here if you want to connect a USB Digital Subscriber Line (DSL) 12 modem to your computer's USB port. You will then need to choose your 13 modem from the list below. 14 15 To compile this driver as a module, choose M here: the 16 module will be called usbatm. 17 18if USB_ATM 19 20config USB_SPEEDTOUCH 21 tristate "Speedtouch USB support" 22 select FW_LOADER 23 help 24 Say Y here if you have an SpeedTouch USB or SpeedTouch 330 25 modem. In order to use your modem you will need to install the 26 two parts of the firmware, extracted by the user space tools; see 27 <http://www.linux-usb.org/SpeedTouch/> for details. 28 29 To compile this driver as a module, choose M here: the 30 module will be called speedtch. 31 32config USB_CXACRU 33 tristate "Conexant AccessRunner USB support" 34 select FW_LOADER 35 help 36 Say Y here if you have an ADSL USB modem based on the Conexant 37 AccessRunner chipset. In order to use your modem you will need to 38 install the firmware, extracted by the user space tools; see 39 <http://accessrunner.sourceforge.net/> for details. 40 41 To compile this driver as a module, choose M here: the 42 module will be called cxacru. 43 44config USB_UEAGLEATM 45 tristate "ADI 930 and eagle USB DSL modem" 46 select FW_LOADER 47 help 48 Say Y here if you have an ADSL USB modem based on the ADI 930 49 or eagle chipset. In order to use your modem you will need to 50 install firmwares and CMV (Command Management Variables); see 51 <https://gna.org/projects/ueagleatm/> for details. 52 53 To compile this driver as a module, choose M here: the 54 module will be called ueagle-atm. 55 56config USB_XUSBATM 57 tristate "Other USB DSL modem support" 58 help 59 Say Y here if you have a DSL USB modem not explicitly supported by 60 another USB DSL drivers. In order to use your modem you will need to 61 pass the vendor ID, product ID, and endpoint numbers for transmission 62 and reception as module parameters. You may need to initialize 63 the modem using a user space utility (a firmware loader for example). 64 65 To compile this driver as a module, choose M here: the 66 module will be called xusbatm. 67 68endif # USB_ATM 69