xref: /openbmc/linux/drivers/usb/atm/Kconfig (revision e4624435)
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB/ATM DSL configuration
4#
5
6menuconfig USB_ATM
7	tristate "USB DSL modem support"
8	depends on ATM
9	select CRC32
10	help
11	  Say Y here if you want to connect a USB Digital Subscriber Line (DSL)
12	  modem to your computer's USB port.  You will then need to choose your
13	  modem from the list below.
14
15	  To compile this driver as a module, choose M here: the
16	  module will be called usbatm.
17
18if USB_ATM
19
20config USB_SPEEDTOUCH
21	tristate "Speedtouch USB support"
22	select FW_LOADER
23	help
24	  Say Y here if you have an SpeedTouch USB or SpeedTouch 330
25	  modem.  In order to use your modem you will need to install the
26	  two parts of the firmware, extracted by the user space tools; see
27	  <http://www.linux-usb.org/SpeedTouch/> for details.
28
29	  To compile this driver as a module, choose M here: the
30	  module will be called speedtch.
31
32config USB_CXACRU
33	tristate "Conexant AccessRunner USB support"
34	select FW_LOADER
35	help
36	  Say Y here if you have an ADSL USB modem based on the Conexant
37	  AccessRunner chipset.  In order to use your modem you will need to
38	  install the firmware, extracted by the user space tools; see
39	  <http://accessrunner.sourceforge.net/> for details.
40
41	  To compile this driver as a module, choose M here: the
42	  module will be called cxacru.
43
44config USB_UEAGLEATM
45	tristate "ADI 930 and eagle USB DSL modem"
46	select FW_LOADER
47	help
48	  Say Y here if you have an ADSL USB modem based on the ADI 930
49	  or eagle chipset. In order to use your modem you will need to
50	  install firmwares and CMV (Command Management Variables); see
51	  <https://gna.org/projects/ueagleatm/> for details.
52
53	  To compile this driver as a module, choose M here: the
54	  module will be called ueagle-atm.
55
56config USB_XUSBATM
57	tristate "Other USB DSL modem support"
58	help
59	  Say Y here if you have a DSL USB modem not explicitly supported by
60	  another USB DSL drivers.  In order to use your modem you will need to
61	  pass the vendor ID, product ID, and endpoint numbers for transmission
62	  and reception as module parameters.  You may need to initialize
63	  the modem using a user space utility (a firmware loader for example).
64
65	  To compile this driver as a module, choose M here: the
66	  module will be called xusbatm.
67
68endif # USB_ATM
69