1# 2# USB device configuration 3# 4 5config USB_OHCI_BIG_ENDIAN_DESC 6 bool 7 8config USB_OHCI_BIG_ENDIAN_MMIO 9 bool 10 11config USB_OHCI_LITTLE_ENDIAN 12 bool 13 default n if STB03xxx || PPC_MPC52xx 14 default y 15 16config USB_EHCI_BIG_ENDIAN_MMIO 17 bool 18 19config USB_EHCI_BIG_ENDIAN_DESC 20 bool 21 22menuconfig USB_SUPPORT 23 bool "USB support" 24 depends on HAS_IOMEM 25 default y 26 ---help--- 27 This option adds core support for Universal Serial Bus (USB). 28 You will also need drivers from the following menu to make use of it. 29 30if USB_SUPPORT 31 32config USB_COMMON 33 tristate 34 default y 35 depends on USB || USB_GADGET 36 37config USB_ARCH_HAS_HCD 38 def_bool y 39 40# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. 41config USB 42 tristate "Support for Host-side USB" 43 depends on USB_ARCH_HAS_HCD 44 select NLS # for UTF-8 strings 45 ---help--- 46 Universal Serial Bus (USB) is a specification for a serial bus 47 subsystem which offers higher speeds and more features than the 48 traditional PC serial port. The bus supplies power to peripherals 49 and allows for hot swapping. Up to 127 USB peripherals can be 50 connected to a single USB host in a tree structure. 51 52 The USB host is the root of the tree, the peripherals are the 53 leaves and the inner nodes are special USB devices called hubs. 54 Most PCs now have USB host ports, used to connect peripherals 55 such as scanners, keyboards, mice, modems, cameras, disks, 56 flash memory, network links, and printers to the PC. 57 58 Say Y here if your computer has a host-side USB port and you want 59 to use USB devices. You then need to say Y to at least one of the 60 Host Controller Driver (HCD) options below. Choose a USB 1.1 61 controller, such as "UHCI HCD support" or "OHCI HCD support", 62 and "EHCI HCD (USB 2.0) support" except for older systems that 63 do not have USB 2.0 support. It doesn't normally hurt to select 64 them all if you are not certain. 65 66 If your system has a device-side USB port, used in the peripheral 67 side of the USB protocol, see the "USB Gadget" framework instead. 68 69 After choosing your HCD, then select drivers for the USB peripherals 70 you'll be using. You may want to check out the information provided 71 in <file:Documentation/usb/> and especially the links given in 72 <file:Documentation/usb/usb-help.txt>. 73 74 To compile this driver as a module, choose M here: the 75 module will be called usbcore. 76 77if USB 78 79source "drivers/usb/core/Kconfig" 80 81source "drivers/usb/mon/Kconfig" 82 83source "drivers/usb/wusbcore/Kconfig" 84 85source "drivers/usb/host/Kconfig" 86 87source "drivers/usb/renesas_usbhs/Kconfig" 88 89source "drivers/usb/class/Kconfig" 90 91source "drivers/usb/storage/Kconfig" 92 93source "drivers/usb/image/Kconfig" 94 95source "drivers/usb/usbip/Kconfig" 96 97endif 98 99source "drivers/usb/musb/Kconfig" 100 101source "drivers/usb/dwc3/Kconfig" 102 103source "drivers/usb/dwc2/Kconfig" 104 105source "drivers/usb/chipidea/Kconfig" 106 107comment "USB port drivers" 108 109if USB 110 111config USB_USS720 112 tristate "USS720 parport driver" 113 depends on PARPORT 114 select PARPORT_NOT_PC 115 ---help--- 116 This driver is for USB parallel port adapters that use the Lucent 117 Technologies USS-720 chip. These cables are plugged into your USB 118 port and provide USB compatibility to peripherals designed with 119 parallel port interfaces. 120 121 The chip has two modes: automatic mode and manual mode. In automatic 122 mode, it looks to the computer like a standard USB printer. Only 123 printers may be connected to the USS-720 in this mode. The generic 124 USB printer driver ("USB Printer support", above) may be used in 125 that mode, and you can say N here if you want to use the chip only 126 in this mode. 127 128 Manual mode is not limited to printers, any parallel port 129 device should work. This driver utilizes manual mode. 130 Note however that some operations are three orders of magnitude 131 slower than on a PCI/ISA Parallel Port, so timing critical 132 applications might not work. 133 134 Say Y here if you own an USS-720 USB->Parport cable and intend to 135 connect anything other than a printer to it. 136 137 To compile this driver as a module, choose M here: the 138 module will be called uss720. 139 140source "drivers/usb/serial/Kconfig" 141 142source "drivers/usb/misc/Kconfig" 143 144source "drivers/usb/atm/Kconfig" 145 146endif # USB 147 148source "drivers/usb/phy/Kconfig" 149 150source "drivers/usb/gadget/Kconfig" 151 152config USB_LED_TRIG 153 bool "USB LED Triggers" 154 depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS 155 help 156 This option adds LED triggers for USB host and/or gadget activity. 157 158 Say Y here if you are working on a system with led-class supported 159 LEDs and you want to use them as activity indicators for USB host or 160 gadget. 161 162endif # USB_SUPPORT 163