1# 2# USB device configuration 3# 4 5config USB_OHCI_BIG_ENDIAN_DESC 6 bool 7 8config USB_OHCI_BIG_ENDIAN_MMIO 9 bool 10 11config USB_OHCI_LITTLE_ENDIAN 12 bool 13 default n if STB03xxx || PPC_MPC52xx 14 default y 15 16config USB_EHCI_BIG_ENDIAN_MMIO 17 bool 18 19config USB_EHCI_BIG_ENDIAN_DESC 20 bool 21 22menuconfig USB_SUPPORT 23 bool "USB support" 24 depends on HAS_IOMEM 25 default y 26 ---help--- 27 This option adds core support for Universal Serial Bus (USB). 28 You will also need drivers from the following menu to make use of it. 29 30if USB_SUPPORT 31 32config USB_COMMON 33 tristate 34 default y 35 depends on USB || USB_GADGET 36 37config USB_ARCH_HAS_HCD 38 def_bool y 39 40# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. 41config USB 42 tristate "Support for Host-side USB" 43 depends on USB_ARCH_HAS_HCD 44 select NLS # for UTF-8 strings 45 ---help--- 46 Universal Serial Bus (USB) is a specification for a serial bus 47 subsystem which offers higher speeds and more features than the 48 traditional PC serial port. The bus supplies power to peripherals 49 and allows for hot swapping. Up to 127 USB peripherals can be 50 connected to a single USB host in a tree structure. 51 52 The USB host is the root of the tree, the peripherals are the 53 leaves and the inner nodes are special USB devices called hubs. 54 Most PCs now have USB host ports, used to connect peripherals 55 such as scanners, keyboards, mice, modems, cameras, disks, 56 flash memory, network links, and printers to the PC. 57 58 Say Y here if your computer has a host-side USB port and you want 59 to use USB devices. You then need to say Y to at least one of the 60 Host Controller Driver (HCD) options below. Choose a USB 1.1 61 controller, such as "UHCI HCD support" or "OHCI HCD support", 62 and "EHCI HCD (USB 2.0) support" except for older systems that 63 do not have USB 2.0 support. It doesn't normally hurt to select 64 them all if you are not certain. 65 66 If your system has a device-side USB port, used in the peripheral 67 side of the USB protocol, see the "USB Gadget" framework instead. 68 69 After choosing your HCD, then select drivers for the USB peripherals 70 you'll be using. You may want to check out the information provided 71 in <file:Documentation/usb/> and especially the links given in 72 <file:Documentation/usb/usb-help.txt>. 73 74 To compile this driver as a module, choose M here: the 75 module will be called usbcore. 76 77if USB 78 79source "drivers/usb/core/Kconfig" 80 81source "drivers/usb/mon/Kconfig" 82 83source "drivers/usb/wusbcore/Kconfig" 84 85source "drivers/usb/host/Kconfig" 86 87source "drivers/usb/renesas_usbhs/Kconfig" 88 89source "drivers/usb/class/Kconfig" 90 91source "drivers/usb/storage/Kconfig" 92 93source "drivers/usb/image/Kconfig" 94 95source "drivers/usb/usbip/Kconfig" 96 97endif 98 99source "drivers/usb/musb/Kconfig" 100 101source "drivers/usb/dwc3/Kconfig" 102 103source "drivers/usb/dwc2/Kconfig" 104 105source "drivers/usb/chipidea/Kconfig" 106 107source "drivers/usb/isp1760/Kconfig" 108 109comment "USB port drivers" 110 111if USB 112 113config USB_USS720 114 tristate "USS720 parport driver" 115 depends on PARPORT 116 select PARPORT_NOT_PC 117 ---help--- 118 This driver is for USB parallel port adapters that use the Lucent 119 Technologies USS-720 chip. These cables are plugged into your USB 120 port and provide USB compatibility to peripherals designed with 121 parallel port interfaces. 122 123 The chip has two modes: automatic mode and manual mode. In automatic 124 mode, it looks to the computer like a standard USB printer. Only 125 printers may be connected to the USS-720 in this mode. The generic 126 USB printer driver ("USB Printer support", above) may be used in 127 that mode, and you can say N here if you want to use the chip only 128 in this mode. 129 130 Manual mode is not limited to printers, any parallel port 131 device should work. This driver utilizes manual mode. 132 Note however that some operations are three orders of magnitude 133 slower than on a PCI/ISA Parallel Port, so timing critical 134 applications might not work. 135 136 Say Y here if you own an USS-720 USB->Parport cable and intend to 137 connect anything other than a printer to it. 138 139 To compile this driver as a module, choose M here: the 140 module will be called uss720. 141 142source "drivers/usb/serial/Kconfig" 143 144source "drivers/usb/misc/Kconfig" 145 146source "drivers/usb/atm/Kconfig" 147 148endif # USB 149 150source "drivers/usb/phy/Kconfig" 151 152source "drivers/usb/gadget/Kconfig" 153 154config USB_LED_TRIG 155 bool "USB LED Triggers" 156 depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS 157 help 158 This option adds LED triggers for USB host and/or gadget activity. 159 160 Say Y here if you are working on a system with led-class supported 161 LEDs and you want to use them as activity indicators for USB host or 162 gadget. 163 164endif # USB_SUPPORT 165