1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * uio_aec.c -- simple driver for Adrienne Electronics Corp time code PCI device 4 * 5 * Copyright (C) 2008 Brandon Philips <brandon@ifup.org> 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/pci.h> 11 #include <linux/init.h> 12 #include <linux/interrupt.h> 13 #include <linux/cdev.h> 14 #include <linux/fs.h> 15 #include <linux/io.h> 16 #include <linux/uaccess.h> 17 #include <linux/uio_driver.h> 18 #include <linux/slab.h> 19 20 #define PCI_VENDOR_ID_AEC 0xaecb 21 #define PCI_DEVICE_ID_AEC_VITCLTC 0x6250 22 23 #define INT_ENABLE_ADDR 0xFC 24 #define INT_ENABLE 0x10 25 #define INT_DISABLE 0x0 26 27 #define INT_MASK_ADDR 0x2E 28 #define INT_MASK_ALL 0x3F 29 30 #define INTA_DRVR_ADDR 0xFE 31 #define INTA_ENABLED_FLAG 0x08 32 #define INTA_FLAG 0x01 33 34 #define MAILBOX 0x0F 35 36 static struct pci_device_id ids[] = { 37 { PCI_DEVICE(PCI_VENDOR_ID_AEC, PCI_DEVICE_ID_AEC_VITCLTC), }, 38 { 0, } 39 }; 40 MODULE_DEVICE_TABLE(pci, ids); 41 42 static irqreturn_t aectc_irq(int irq, struct uio_info *dev_info) 43 { 44 void __iomem *int_flag = dev_info->priv + INTA_DRVR_ADDR; 45 unsigned char status = ioread8(int_flag); 46 47 48 if ((status & INTA_ENABLED_FLAG) && (status & INTA_FLAG)) { 49 /* application writes 0x00 to 0x2F to get next interrupt */ 50 status = ioread8(dev_info->priv + MAILBOX); 51 return IRQ_HANDLED; 52 } 53 54 return IRQ_NONE; 55 } 56 57 static void print_board_data(struct pci_dev *pdev, struct uio_info *i) 58 { 59 dev_info(&pdev->dev, "PCI-TC board vendor: %x%x number: %x%x" 60 " revision: %c%c\n", 61 ioread8(i->priv + 0x01), 62 ioread8(i->priv + 0x00), 63 ioread8(i->priv + 0x03), 64 ioread8(i->priv + 0x02), 65 ioread8(i->priv + 0x06), 66 ioread8(i->priv + 0x07)); 67 } 68 69 static int probe(struct pci_dev *pdev, const struct pci_device_id *id) 70 { 71 struct uio_info *info; 72 int ret; 73 74 info = devm_kzalloc(&pdev->dev, sizeof(struct uio_info), GFP_KERNEL); 75 if (!info) 76 return -ENOMEM; 77 78 if (pci_enable_device(pdev)) 79 return -ENODEV; 80 81 if (pci_request_regions(pdev, "aectc")) 82 goto out_disable; 83 84 info->name = "aectc"; 85 info->port[0].start = pci_resource_start(pdev, 0); 86 if (!info->port[0].start) 87 goto out_release; 88 info->priv = pci_iomap(pdev, 0, 0); 89 if (!info->priv) 90 goto out_release; 91 info->port[0].size = pci_resource_len(pdev, 0); 92 info->port[0].porttype = UIO_PORT_GPIO; 93 94 info->version = "0.0.1"; 95 info->irq = pdev->irq; 96 info->irq_flags = IRQF_SHARED; 97 info->handler = aectc_irq; 98 99 print_board_data(pdev, info); 100 ret = uio_register_device(&pdev->dev, info); 101 if (ret) 102 goto out_unmap; 103 104 iowrite32(INT_ENABLE, info->priv + INT_ENABLE_ADDR); 105 iowrite8(INT_MASK_ALL, info->priv + INT_MASK_ADDR); 106 if (!(ioread8(info->priv + INTA_DRVR_ADDR) 107 & INTA_ENABLED_FLAG)) 108 dev_err(&pdev->dev, "aectc: interrupts not enabled\n"); 109 110 pci_set_drvdata(pdev, info); 111 112 return 0; 113 114 out_unmap: 115 pci_iounmap(pdev, info->priv); 116 out_release: 117 pci_release_regions(pdev); 118 out_disable: 119 pci_disable_device(pdev); 120 return -ENODEV; 121 } 122 123 static void remove(struct pci_dev *pdev) 124 { 125 struct uio_info *info = pci_get_drvdata(pdev); 126 127 /* disable interrupts */ 128 iowrite8(INT_DISABLE, info->priv + INT_MASK_ADDR); 129 iowrite32(INT_DISABLE, info->priv + INT_ENABLE_ADDR); 130 /* read mailbox to ensure board drops irq */ 131 ioread8(info->priv + MAILBOX); 132 133 uio_unregister_device(info); 134 pci_release_regions(pdev); 135 pci_disable_device(pdev); 136 iounmap(info->priv); 137 } 138 139 static struct pci_driver pci_driver = { 140 .name = "aectc", 141 .id_table = ids, 142 .probe = probe, 143 .remove = remove, 144 }; 145 146 module_pci_driver(pci_driver); 147 MODULE_LICENSE("GPL"); 148