1 // SPDX-License-Identifier: GPL-1.0+ 2 /* 3 * Device driver for Microgate SyncLink GT serial adapters. 4 * 5 * written by Paul Fulghum for Microgate Corporation 6 * paulkf@microgate.com 7 * 8 * Microgate and SyncLink are trademarks of Microgate Corporation 9 * 10 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 11 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 12 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 13 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 14 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 15 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 16 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 17 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 18 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 19 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 20 * OF THE POSSIBILITY OF SUCH DAMAGE. 21 */ 22 23 /* 24 * DEBUG OUTPUT DEFINITIONS 25 * 26 * uncomment lines below to enable specific types of debug output 27 * 28 * DBGINFO information - most verbose output 29 * DBGERR serious errors 30 * DBGBH bottom half service routine debugging 31 * DBGISR interrupt service routine debugging 32 * DBGDATA output receive and transmit data 33 * DBGTBUF output transmit DMA buffers and registers 34 * DBGRBUF output receive DMA buffers and registers 35 */ 36 37 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt 38 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt 39 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt 40 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt 41 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) 42 /*#define DBGTBUF(info) dump_tbufs(info)*/ 43 /*#define DBGRBUF(info) dump_rbufs(info)*/ 44 45 46 #include <linux/module.h> 47 #include <linux/errno.h> 48 #include <linux/signal.h> 49 #include <linux/sched.h> 50 #include <linux/timer.h> 51 #include <linux/interrupt.h> 52 #include <linux/pci.h> 53 #include <linux/tty.h> 54 #include <linux/tty_flip.h> 55 #include <linux/serial.h> 56 #include <linux/major.h> 57 #include <linux/string.h> 58 #include <linux/fcntl.h> 59 #include <linux/ptrace.h> 60 #include <linux/ioport.h> 61 #include <linux/mm.h> 62 #include <linux/seq_file.h> 63 #include <linux/slab.h> 64 #include <linux/netdevice.h> 65 #include <linux/vmalloc.h> 66 #include <linux/init.h> 67 #include <linux/delay.h> 68 #include <linux/ioctl.h> 69 #include <linux/termios.h> 70 #include <linux/bitops.h> 71 #include <linux/workqueue.h> 72 #include <linux/hdlc.h> 73 #include <linux/synclink.h> 74 75 #include <asm/io.h> 76 #include <asm/irq.h> 77 #include <asm/dma.h> 78 #include <asm/types.h> 79 #include <linux/uaccess.h> 80 81 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) 82 #define SYNCLINK_GENERIC_HDLC 1 83 #else 84 #define SYNCLINK_GENERIC_HDLC 0 85 #endif 86 87 /* 88 * module identification 89 */ 90 static char *driver_name = "SyncLink GT"; 91 static char *slgt_driver_name = "synclink_gt"; 92 static char *tty_dev_prefix = "ttySLG"; 93 MODULE_LICENSE("GPL"); 94 #define MGSL_MAGIC 0x5401 95 #define MAX_DEVICES 32 96 97 static const struct pci_device_id pci_table[] = { 98 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, 99 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, 100 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, 101 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, 102 {0,}, /* terminate list */ 103 }; 104 MODULE_DEVICE_TABLE(pci, pci_table); 105 106 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); 107 static void remove_one(struct pci_dev *dev); 108 static struct pci_driver pci_driver = { 109 .name = "synclink_gt", 110 .id_table = pci_table, 111 .probe = init_one, 112 .remove = remove_one, 113 }; 114 115 static bool pci_registered; 116 117 /* 118 * module configuration and status 119 */ 120 static struct slgt_info *slgt_device_list; 121 static int slgt_device_count; 122 123 static int ttymajor; 124 static int debug_level; 125 static int maxframe[MAX_DEVICES]; 126 127 module_param(ttymajor, int, 0); 128 module_param(debug_level, int, 0); 129 module_param_array(maxframe, int, NULL, 0); 130 131 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); 132 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); 133 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); 134 135 /* 136 * tty support and callbacks 137 */ 138 static struct tty_driver *serial_driver; 139 140 static void wait_until_sent(struct tty_struct *tty, int timeout); 141 static void flush_buffer(struct tty_struct *tty); 142 static void tx_release(struct tty_struct *tty); 143 144 /* 145 * generic HDLC support 146 */ 147 #define dev_to_port(D) (dev_to_hdlc(D)->priv) 148 149 150 /* 151 * device specific structures, macros and functions 152 */ 153 154 #define SLGT_MAX_PORTS 4 155 #define SLGT_REG_SIZE 256 156 157 /* 158 * conditional wait facility 159 */ 160 struct cond_wait { 161 struct cond_wait *next; 162 wait_queue_head_t q; 163 wait_queue_entry_t wait; 164 unsigned int data; 165 }; 166 static void flush_cond_wait(struct cond_wait **head); 167 168 /* 169 * DMA buffer descriptor and access macros 170 */ 171 struct slgt_desc 172 { 173 __le16 count; 174 __le16 status; 175 __le32 pbuf; /* physical address of data buffer */ 176 __le32 next; /* physical address of next descriptor */ 177 178 /* driver book keeping */ 179 char *buf; /* virtual address of data buffer */ 180 unsigned int pdesc; /* physical address of this descriptor */ 181 dma_addr_t buf_dma_addr; 182 unsigned short buf_count; 183 }; 184 185 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) 186 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) 187 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) 188 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) 189 #define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) 190 #define desc_count(a) (le16_to_cpu((a).count)) 191 #define desc_status(a) (le16_to_cpu((a).status)) 192 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15) 193 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2) 194 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) 195 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0) 196 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) 197 198 struct _input_signal_events { 199 int ri_up; 200 int ri_down; 201 int dsr_up; 202 int dsr_down; 203 int dcd_up; 204 int dcd_down; 205 int cts_up; 206 int cts_down; 207 }; 208 209 /* 210 * device instance data structure 211 */ 212 struct slgt_info { 213 void *if_ptr; /* General purpose pointer (used by SPPP) */ 214 struct tty_port port; 215 216 struct slgt_info *next_device; /* device list link */ 217 218 int magic; 219 220 char device_name[25]; 221 struct pci_dev *pdev; 222 223 int port_count; /* count of ports on adapter */ 224 int adapter_num; /* adapter instance number */ 225 int port_num; /* port instance number */ 226 227 /* array of pointers to port contexts on this adapter */ 228 struct slgt_info *port_array[SLGT_MAX_PORTS]; 229 230 int line; /* tty line instance number */ 231 232 struct mgsl_icount icount; 233 234 int timeout; 235 int x_char; /* xon/xoff character */ 236 unsigned int read_status_mask; 237 unsigned int ignore_status_mask; 238 239 wait_queue_head_t status_event_wait_q; 240 wait_queue_head_t event_wait_q; 241 struct timer_list tx_timer; 242 struct timer_list rx_timer; 243 244 unsigned int gpio_present; 245 struct cond_wait *gpio_wait_q; 246 247 spinlock_t lock; /* spinlock for synchronizing with ISR */ 248 249 struct work_struct task; 250 u32 pending_bh; 251 bool bh_requested; 252 bool bh_running; 253 254 int isr_overflow; 255 bool irq_requested; /* true if IRQ requested */ 256 bool irq_occurred; /* for diagnostics use */ 257 258 /* device configuration */ 259 260 unsigned int bus_type; 261 unsigned int irq_level; 262 unsigned long irq_flags; 263 264 unsigned char __iomem * reg_addr; /* memory mapped registers address */ 265 u32 phys_reg_addr; 266 bool reg_addr_requested; 267 268 MGSL_PARAMS params; /* communications parameters */ 269 u32 idle_mode; 270 u32 max_frame_size; /* as set by device config */ 271 272 unsigned int rbuf_fill_level; 273 unsigned int rx_pio; 274 unsigned int if_mode; 275 unsigned int base_clock; 276 unsigned int xsync; 277 unsigned int xctrl; 278 279 /* device status */ 280 281 bool rx_enabled; 282 bool rx_restart; 283 284 bool tx_enabled; 285 bool tx_active; 286 287 unsigned char signals; /* serial signal states */ 288 int init_error; /* initialization error */ 289 290 unsigned char *tx_buf; 291 int tx_count; 292 293 char *flag_buf; 294 bool drop_rts_on_tx_done; 295 struct _input_signal_events input_signal_events; 296 297 int dcd_chkcount; /* check counts to prevent */ 298 int cts_chkcount; /* too many IRQs if a signal */ 299 int dsr_chkcount; /* is floating */ 300 int ri_chkcount; 301 302 char *bufs; /* virtual address of DMA buffer lists */ 303 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ 304 305 unsigned int rbuf_count; 306 struct slgt_desc *rbufs; 307 unsigned int rbuf_current; 308 unsigned int rbuf_index; 309 unsigned int rbuf_fill_index; 310 unsigned short rbuf_fill_count; 311 312 unsigned int tbuf_count; 313 struct slgt_desc *tbufs; 314 unsigned int tbuf_current; 315 unsigned int tbuf_start; 316 317 unsigned char *tmp_rbuf; 318 unsigned int tmp_rbuf_count; 319 320 /* SPPP/Cisco HDLC device parts */ 321 322 int netcount; 323 spinlock_t netlock; 324 #if SYNCLINK_GENERIC_HDLC 325 struct net_device *netdev; 326 #endif 327 328 }; 329 330 static MGSL_PARAMS default_params = { 331 .mode = MGSL_MODE_HDLC, 332 .loopback = 0, 333 .flags = HDLC_FLAG_UNDERRUN_ABORT15, 334 .encoding = HDLC_ENCODING_NRZI_SPACE, 335 .clock_speed = 0, 336 .addr_filter = 0xff, 337 .crc_type = HDLC_CRC_16_CCITT, 338 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, 339 .preamble = HDLC_PREAMBLE_PATTERN_NONE, 340 .data_rate = 9600, 341 .data_bits = 8, 342 .stop_bits = 1, 343 .parity = ASYNC_PARITY_NONE 344 }; 345 346 347 #define BH_RECEIVE 1 348 #define BH_TRANSMIT 2 349 #define BH_STATUS 4 350 #define IO_PIN_SHUTDOWN_LIMIT 100 351 352 #define DMABUFSIZE 256 353 #define DESC_LIST_SIZE 4096 354 355 #define MASK_PARITY BIT1 356 #define MASK_FRAMING BIT0 357 #define MASK_BREAK BIT14 358 #define MASK_OVERRUN BIT4 359 360 #define GSR 0x00 /* global status */ 361 #define JCR 0x04 /* JTAG control */ 362 #define IODR 0x08 /* GPIO direction */ 363 #define IOER 0x0c /* GPIO interrupt enable */ 364 #define IOVR 0x10 /* GPIO value */ 365 #define IOSR 0x14 /* GPIO interrupt status */ 366 #define TDR 0x80 /* tx data */ 367 #define RDR 0x80 /* rx data */ 368 #define TCR 0x82 /* tx control */ 369 #define TIR 0x84 /* tx idle */ 370 #define TPR 0x85 /* tx preamble */ 371 #define RCR 0x86 /* rx control */ 372 #define VCR 0x88 /* V.24 control */ 373 #define CCR 0x89 /* clock control */ 374 #define BDR 0x8a /* baud divisor */ 375 #define SCR 0x8c /* serial control */ 376 #define SSR 0x8e /* serial status */ 377 #define RDCSR 0x90 /* rx DMA control/status */ 378 #define TDCSR 0x94 /* tx DMA control/status */ 379 #define RDDAR 0x98 /* rx DMA descriptor address */ 380 #define TDDAR 0x9c /* tx DMA descriptor address */ 381 #define XSR 0x40 /* extended sync pattern */ 382 #define XCR 0x44 /* extended control */ 383 384 #define RXIDLE BIT14 385 #define RXBREAK BIT14 386 #define IRQ_TXDATA BIT13 387 #define IRQ_TXIDLE BIT12 388 #define IRQ_TXUNDER BIT11 /* HDLC */ 389 #define IRQ_RXDATA BIT10 390 #define IRQ_RXIDLE BIT9 /* HDLC */ 391 #define IRQ_RXBREAK BIT9 /* async */ 392 #define IRQ_RXOVER BIT8 393 #define IRQ_DSR BIT7 394 #define IRQ_CTS BIT6 395 #define IRQ_DCD BIT5 396 #define IRQ_RI BIT4 397 #define IRQ_ALL 0x3ff0 398 #define IRQ_MASTER BIT0 399 400 #define slgt_irq_on(info, mask) \ 401 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) 402 #define slgt_irq_off(info, mask) \ 403 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) 404 405 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); 406 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); 407 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); 408 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); 409 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); 410 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); 411 412 static void msc_set_vcr(struct slgt_info *info); 413 414 static int startup(struct slgt_info *info); 415 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); 416 static void shutdown(struct slgt_info *info); 417 static void program_hw(struct slgt_info *info); 418 static void change_params(struct slgt_info *info); 419 420 static int adapter_test(struct slgt_info *info); 421 422 static void reset_port(struct slgt_info *info); 423 static void async_mode(struct slgt_info *info); 424 static void sync_mode(struct slgt_info *info); 425 426 static void rx_stop(struct slgt_info *info); 427 static void rx_start(struct slgt_info *info); 428 static void reset_rbufs(struct slgt_info *info); 429 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); 430 static bool rx_get_frame(struct slgt_info *info); 431 static bool rx_get_buf(struct slgt_info *info); 432 433 static void tx_start(struct slgt_info *info); 434 static void tx_stop(struct slgt_info *info); 435 static void tx_set_idle(struct slgt_info *info); 436 static unsigned int tbuf_bytes(struct slgt_info *info); 437 static void reset_tbufs(struct slgt_info *info); 438 static void tdma_reset(struct slgt_info *info); 439 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); 440 441 static void get_gtsignals(struct slgt_info *info); 442 static void set_gtsignals(struct slgt_info *info); 443 static void set_rate(struct slgt_info *info, u32 data_rate); 444 445 static void bh_transmit(struct slgt_info *info); 446 static void isr_txeom(struct slgt_info *info, unsigned short status); 447 448 static void tx_timeout(struct timer_list *t); 449 static void rx_timeout(struct timer_list *t); 450 451 /* 452 * ioctl handlers 453 */ 454 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); 455 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); 456 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); 457 static int get_txidle(struct slgt_info *info, int __user *idle_mode); 458 static int set_txidle(struct slgt_info *info, int idle_mode); 459 static int tx_enable(struct slgt_info *info, int enable); 460 static int tx_abort(struct slgt_info *info); 461 static int rx_enable(struct slgt_info *info, int enable); 462 static int modem_input_wait(struct slgt_info *info,int arg); 463 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); 464 static int get_interface(struct slgt_info *info, int __user *if_mode); 465 static int set_interface(struct slgt_info *info, int if_mode); 466 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); 467 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); 468 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); 469 static int get_xsync(struct slgt_info *info, int __user *if_mode); 470 static int set_xsync(struct slgt_info *info, int if_mode); 471 static int get_xctrl(struct slgt_info *info, int __user *if_mode); 472 static int set_xctrl(struct slgt_info *info, int if_mode); 473 474 /* 475 * driver functions 476 */ 477 static void release_resources(struct slgt_info *info); 478 479 /* 480 * DEBUG OUTPUT CODE 481 */ 482 #ifndef DBGINFO 483 #define DBGINFO(fmt) 484 #endif 485 #ifndef DBGERR 486 #define DBGERR(fmt) 487 #endif 488 #ifndef DBGBH 489 #define DBGBH(fmt) 490 #endif 491 #ifndef DBGISR 492 #define DBGISR(fmt) 493 #endif 494 495 #ifdef DBGDATA 496 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) 497 { 498 int i; 499 int linecount; 500 printk("%s %s data:\n",info->device_name, label); 501 while(count) { 502 linecount = (count > 16) ? 16 : count; 503 for(i=0; i < linecount; i++) 504 printk("%02X ",(unsigned char)data[i]); 505 for(;i<17;i++) 506 printk(" "); 507 for(i=0;i<linecount;i++) { 508 if (data[i]>=040 && data[i]<=0176) 509 printk("%c",data[i]); 510 else 511 printk("."); 512 } 513 printk("\n"); 514 data += linecount; 515 count -= linecount; 516 } 517 } 518 #else 519 #define DBGDATA(info, buf, size, label) 520 #endif 521 522 #ifdef DBGTBUF 523 static void dump_tbufs(struct slgt_info *info) 524 { 525 int i; 526 printk("tbuf_current=%d\n", info->tbuf_current); 527 for (i=0 ; i < info->tbuf_count ; i++) { 528 printk("%d: count=%04X status=%04X\n", 529 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); 530 } 531 } 532 #else 533 #define DBGTBUF(info) 534 #endif 535 536 #ifdef DBGRBUF 537 static void dump_rbufs(struct slgt_info *info) 538 { 539 int i; 540 printk("rbuf_current=%d\n", info->rbuf_current); 541 for (i=0 ; i < info->rbuf_count ; i++) { 542 printk("%d: count=%04X status=%04X\n", 543 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); 544 } 545 } 546 #else 547 #define DBGRBUF(info) 548 #endif 549 550 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) 551 { 552 #ifdef SANITY_CHECK 553 if (!info) { 554 printk("null struct slgt_info for (%s) in %s\n", devname, name); 555 return 1; 556 } 557 if (info->magic != MGSL_MAGIC) { 558 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); 559 return 1; 560 } 561 #else 562 if (!info) 563 return 1; 564 #endif 565 return 0; 566 } 567 568 /* 569 * line discipline callback wrappers 570 * 571 * The wrappers maintain line discipline references 572 * while calling into the line discipline. 573 * 574 * ldisc_receive_buf - pass receive data to line discipline 575 */ 576 static void ldisc_receive_buf(struct tty_struct *tty, 577 const __u8 *data, char *flags, int count) 578 { 579 struct tty_ldisc *ld; 580 if (!tty) 581 return; 582 ld = tty_ldisc_ref(tty); 583 if (ld) { 584 if (ld->ops->receive_buf) 585 ld->ops->receive_buf(tty, data, flags, count); 586 tty_ldisc_deref(ld); 587 } 588 } 589 590 /* tty callbacks */ 591 592 static int open(struct tty_struct *tty, struct file *filp) 593 { 594 struct slgt_info *info; 595 int retval, line; 596 unsigned long flags; 597 598 line = tty->index; 599 if (line >= slgt_device_count) { 600 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); 601 return -ENODEV; 602 } 603 604 info = slgt_device_list; 605 while(info && info->line != line) 606 info = info->next_device; 607 if (sanity_check(info, tty->name, "open")) 608 return -ENODEV; 609 if (info->init_error) { 610 DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); 611 return -ENODEV; 612 } 613 614 tty->driver_data = info; 615 info->port.tty = tty; 616 617 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); 618 619 mutex_lock(&info->port.mutex); 620 621 spin_lock_irqsave(&info->netlock, flags); 622 if (info->netcount) { 623 retval = -EBUSY; 624 spin_unlock_irqrestore(&info->netlock, flags); 625 mutex_unlock(&info->port.mutex); 626 goto cleanup; 627 } 628 info->port.count++; 629 spin_unlock_irqrestore(&info->netlock, flags); 630 631 if (info->port.count == 1) { 632 /* 1st open on this device, init hardware */ 633 retval = startup(info); 634 if (retval < 0) { 635 mutex_unlock(&info->port.mutex); 636 goto cleanup; 637 } 638 } 639 mutex_unlock(&info->port.mutex); 640 retval = block_til_ready(tty, filp, info); 641 if (retval) { 642 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); 643 goto cleanup; 644 } 645 646 retval = 0; 647 648 cleanup: 649 if (retval) { 650 if (tty->count == 1) 651 info->port.tty = NULL; /* tty layer will release tty struct */ 652 if(info->port.count) 653 info->port.count--; 654 } 655 656 DBGINFO(("%s open rc=%d\n", info->device_name, retval)); 657 return retval; 658 } 659 660 static void close(struct tty_struct *tty, struct file *filp) 661 { 662 struct slgt_info *info = tty->driver_data; 663 664 if (sanity_check(info, tty->name, "close")) 665 return; 666 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); 667 668 if (tty_port_close_start(&info->port, tty, filp) == 0) 669 goto cleanup; 670 671 mutex_lock(&info->port.mutex); 672 if (tty_port_initialized(&info->port)) 673 wait_until_sent(tty, info->timeout); 674 flush_buffer(tty); 675 tty_ldisc_flush(tty); 676 677 shutdown(info); 678 mutex_unlock(&info->port.mutex); 679 680 tty_port_close_end(&info->port, tty); 681 info->port.tty = NULL; 682 cleanup: 683 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); 684 } 685 686 static void hangup(struct tty_struct *tty) 687 { 688 struct slgt_info *info = tty->driver_data; 689 unsigned long flags; 690 691 if (sanity_check(info, tty->name, "hangup")) 692 return; 693 DBGINFO(("%s hangup\n", info->device_name)); 694 695 flush_buffer(tty); 696 697 mutex_lock(&info->port.mutex); 698 shutdown(info); 699 700 spin_lock_irqsave(&info->port.lock, flags); 701 info->port.count = 0; 702 info->port.tty = NULL; 703 spin_unlock_irqrestore(&info->port.lock, flags); 704 tty_port_set_active(&info->port, 0); 705 mutex_unlock(&info->port.mutex); 706 707 wake_up_interruptible(&info->port.open_wait); 708 } 709 710 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) 711 { 712 struct slgt_info *info = tty->driver_data; 713 unsigned long flags; 714 715 DBGINFO(("%s set_termios\n", tty->driver->name)); 716 717 change_params(info); 718 719 /* Handle transition to B0 status */ 720 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { 721 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); 722 spin_lock_irqsave(&info->lock,flags); 723 set_gtsignals(info); 724 spin_unlock_irqrestore(&info->lock,flags); 725 } 726 727 /* Handle transition away from B0 status */ 728 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { 729 info->signals |= SerialSignal_DTR; 730 if (!C_CRTSCTS(tty) || !tty_throttled(tty)) 731 info->signals |= SerialSignal_RTS; 732 spin_lock_irqsave(&info->lock,flags); 733 set_gtsignals(info); 734 spin_unlock_irqrestore(&info->lock,flags); 735 } 736 737 /* Handle turning off CRTSCTS */ 738 if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { 739 tty->hw_stopped = 0; 740 tx_release(tty); 741 } 742 } 743 744 static void update_tx_timer(struct slgt_info *info) 745 { 746 /* 747 * use worst case speed of 1200bps to calculate transmit timeout 748 * based on data in buffers (tbuf_bytes) and FIFO (128 bytes) 749 */ 750 if (info->params.mode == MGSL_MODE_HDLC) { 751 int timeout = (tbuf_bytes(info) * 7) + 1000; 752 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout)); 753 } 754 } 755 756 static int write(struct tty_struct *tty, 757 const unsigned char *buf, int count) 758 { 759 int ret = 0; 760 struct slgt_info *info = tty->driver_data; 761 unsigned long flags; 762 763 if (sanity_check(info, tty->name, "write")) 764 return -EIO; 765 766 DBGINFO(("%s write count=%d\n", info->device_name, count)); 767 768 if (!info->tx_buf || (count > info->max_frame_size)) 769 return -EIO; 770 771 if (!count || tty->flow.stopped || tty->hw_stopped) 772 return 0; 773 774 spin_lock_irqsave(&info->lock, flags); 775 776 if (info->tx_count) { 777 /* send accumulated data from send_char() */ 778 if (!tx_load(info, info->tx_buf, info->tx_count)) 779 goto cleanup; 780 info->tx_count = 0; 781 } 782 783 if (tx_load(info, buf, count)) 784 ret = count; 785 786 cleanup: 787 spin_unlock_irqrestore(&info->lock, flags); 788 DBGINFO(("%s write rc=%d\n", info->device_name, ret)); 789 return ret; 790 } 791 792 static int put_char(struct tty_struct *tty, unsigned char ch) 793 { 794 struct slgt_info *info = tty->driver_data; 795 unsigned long flags; 796 int ret = 0; 797 798 if (sanity_check(info, tty->name, "put_char")) 799 return 0; 800 DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); 801 if (!info->tx_buf) 802 return 0; 803 spin_lock_irqsave(&info->lock,flags); 804 if (info->tx_count < info->max_frame_size) { 805 info->tx_buf[info->tx_count++] = ch; 806 ret = 1; 807 } 808 spin_unlock_irqrestore(&info->lock,flags); 809 return ret; 810 } 811 812 static void send_xchar(struct tty_struct *tty, char ch) 813 { 814 struct slgt_info *info = tty->driver_data; 815 unsigned long flags; 816 817 if (sanity_check(info, tty->name, "send_xchar")) 818 return; 819 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); 820 info->x_char = ch; 821 if (ch) { 822 spin_lock_irqsave(&info->lock,flags); 823 if (!info->tx_enabled) 824 tx_start(info); 825 spin_unlock_irqrestore(&info->lock,flags); 826 } 827 } 828 829 static void wait_until_sent(struct tty_struct *tty, int timeout) 830 { 831 struct slgt_info *info = tty->driver_data; 832 unsigned long orig_jiffies, char_time; 833 834 if (!info ) 835 return; 836 if (sanity_check(info, tty->name, "wait_until_sent")) 837 return; 838 DBGINFO(("%s wait_until_sent entry\n", info->device_name)); 839 if (!tty_port_initialized(&info->port)) 840 goto exit; 841 842 orig_jiffies = jiffies; 843 844 /* Set check interval to 1/5 of estimated time to 845 * send a character, and make it at least 1. The check 846 * interval should also be less than the timeout. 847 * Note: use tight timings here to satisfy the NIST-PCTS. 848 */ 849 850 if (info->params.data_rate) { 851 char_time = info->timeout/(32 * 5); 852 if (!char_time) 853 char_time++; 854 } else 855 char_time = 1; 856 857 if (timeout) 858 char_time = min_t(unsigned long, char_time, timeout); 859 860 while (info->tx_active) { 861 msleep_interruptible(jiffies_to_msecs(char_time)); 862 if (signal_pending(current)) 863 break; 864 if (timeout && time_after(jiffies, orig_jiffies + timeout)) 865 break; 866 } 867 exit: 868 DBGINFO(("%s wait_until_sent exit\n", info->device_name)); 869 } 870 871 static unsigned int write_room(struct tty_struct *tty) 872 { 873 struct slgt_info *info = tty->driver_data; 874 unsigned int ret; 875 876 if (sanity_check(info, tty->name, "write_room")) 877 return 0; 878 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; 879 DBGINFO(("%s write_room=%u\n", info->device_name, ret)); 880 return ret; 881 } 882 883 static void flush_chars(struct tty_struct *tty) 884 { 885 struct slgt_info *info = tty->driver_data; 886 unsigned long flags; 887 888 if (sanity_check(info, tty->name, "flush_chars")) 889 return; 890 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); 891 892 if (info->tx_count <= 0 || tty->flow.stopped || 893 tty->hw_stopped || !info->tx_buf) 894 return; 895 896 DBGINFO(("%s flush_chars start transmit\n", info->device_name)); 897 898 spin_lock_irqsave(&info->lock,flags); 899 if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) 900 info->tx_count = 0; 901 spin_unlock_irqrestore(&info->lock,flags); 902 } 903 904 static void flush_buffer(struct tty_struct *tty) 905 { 906 struct slgt_info *info = tty->driver_data; 907 unsigned long flags; 908 909 if (sanity_check(info, tty->name, "flush_buffer")) 910 return; 911 DBGINFO(("%s flush_buffer\n", info->device_name)); 912 913 spin_lock_irqsave(&info->lock, flags); 914 info->tx_count = 0; 915 spin_unlock_irqrestore(&info->lock, flags); 916 917 tty_wakeup(tty); 918 } 919 920 /* 921 * throttle (stop) transmitter 922 */ 923 static void tx_hold(struct tty_struct *tty) 924 { 925 struct slgt_info *info = tty->driver_data; 926 unsigned long flags; 927 928 if (sanity_check(info, tty->name, "tx_hold")) 929 return; 930 DBGINFO(("%s tx_hold\n", info->device_name)); 931 spin_lock_irqsave(&info->lock,flags); 932 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) 933 tx_stop(info); 934 spin_unlock_irqrestore(&info->lock,flags); 935 } 936 937 /* 938 * release (start) transmitter 939 */ 940 static void tx_release(struct tty_struct *tty) 941 { 942 struct slgt_info *info = tty->driver_data; 943 unsigned long flags; 944 945 if (sanity_check(info, tty->name, "tx_release")) 946 return; 947 DBGINFO(("%s tx_release\n", info->device_name)); 948 spin_lock_irqsave(&info->lock, flags); 949 if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) 950 info->tx_count = 0; 951 spin_unlock_irqrestore(&info->lock, flags); 952 } 953 954 /* 955 * Service an IOCTL request 956 * 957 * Arguments 958 * 959 * tty pointer to tty instance data 960 * cmd IOCTL command code 961 * arg command argument/context 962 * 963 * Return 0 if success, otherwise error code 964 */ 965 static int ioctl(struct tty_struct *tty, 966 unsigned int cmd, unsigned long arg) 967 { 968 struct slgt_info *info = tty->driver_data; 969 void __user *argp = (void __user *)arg; 970 int ret; 971 972 if (sanity_check(info, tty->name, "ioctl")) 973 return -ENODEV; 974 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); 975 976 if (cmd != TIOCMIWAIT) { 977 if (tty_io_error(tty)) 978 return -EIO; 979 } 980 981 switch (cmd) { 982 case MGSL_IOCWAITEVENT: 983 return wait_mgsl_event(info, argp); 984 case TIOCMIWAIT: 985 return modem_input_wait(info,(int)arg); 986 case MGSL_IOCSGPIO: 987 return set_gpio(info, argp); 988 case MGSL_IOCGGPIO: 989 return get_gpio(info, argp); 990 case MGSL_IOCWAITGPIO: 991 return wait_gpio(info, argp); 992 case MGSL_IOCGXSYNC: 993 return get_xsync(info, argp); 994 case MGSL_IOCSXSYNC: 995 return set_xsync(info, (int)arg); 996 case MGSL_IOCGXCTRL: 997 return get_xctrl(info, argp); 998 case MGSL_IOCSXCTRL: 999 return set_xctrl(info, (int)arg); 1000 } 1001 mutex_lock(&info->port.mutex); 1002 switch (cmd) { 1003 case MGSL_IOCGPARAMS: 1004 ret = get_params(info, argp); 1005 break; 1006 case MGSL_IOCSPARAMS: 1007 ret = set_params(info, argp); 1008 break; 1009 case MGSL_IOCGTXIDLE: 1010 ret = get_txidle(info, argp); 1011 break; 1012 case MGSL_IOCSTXIDLE: 1013 ret = set_txidle(info, (int)arg); 1014 break; 1015 case MGSL_IOCTXENABLE: 1016 ret = tx_enable(info, (int)arg); 1017 break; 1018 case MGSL_IOCRXENABLE: 1019 ret = rx_enable(info, (int)arg); 1020 break; 1021 case MGSL_IOCTXABORT: 1022 ret = tx_abort(info); 1023 break; 1024 case MGSL_IOCGSTATS: 1025 ret = get_stats(info, argp); 1026 break; 1027 case MGSL_IOCGIF: 1028 ret = get_interface(info, argp); 1029 break; 1030 case MGSL_IOCSIF: 1031 ret = set_interface(info,(int)arg); 1032 break; 1033 default: 1034 ret = -ENOIOCTLCMD; 1035 } 1036 mutex_unlock(&info->port.mutex); 1037 return ret; 1038 } 1039 1040 static int get_icount(struct tty_struct *tty, 1041 struct serial_icounter_struct *icount) 1042 1043 { 1044 struct slgt_info *info = tty->driver_data; 1045 struct mgsl_icount cnow; /* kernel counter temps */ 1046 unsigned long flags; 1047 1048 spin_lock_irqsave(&info->lock,flags); 1049 cnow = info->icount; 1050 spin_unlock_irqrestore(&info->lock,flags); 1051 1052 icount->cts = cnow.cts; 1053 icount->dsr = cnow.dsr; 1054 icount->rng = cnow.rng; 1055 icount->dcd = cnow.dcd; 1056 icount->rx = cnow.rx; 1057 icount->tx = cnow.tx; 1058 icount->frame = cnow.frame; 1059 icount->overrun = cnow.overrun; 1060 icount->parity = cnow.parity; 1061 icount->brk = cnow.brk; 1062 icount->buf_overrun = cnow.buf_overrun; 1063 1064 return 0; 1065 } 1066 1067 /* 1068 * support for 32 bit ioctl calls on 64 bit systems 1069 */ 1070 #ifdef CONFIG_COMPAT 1071 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params) 1072 { 1073 struct MGSL_PARAMS32 tmp_params; 1074 1075 DBGINFO(("%s get_params32\n", info->device_name)); 1076 memset(&tmp_params, 0, sizeof(tmp_params)); 1077 tmp_params.mode = (compat_ulong_t)info->params.mode; 1078 tmp_params.loopback = info->params.loopback; 1079 tmp_params.flags = info->params.flags; 1080 tmp_params.encoding = info->params.encoding; 1081 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed; 1082 tmp_params.addr_filter = info->params.addr_filter; 1083 tmp_params.crc_type = info->params.crc_type; 1084 tmp_params.preamble_length = info->params.preamble_length; 1085 tmp_params.preamble = info->params.preamble; 1086 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate; 1087 tmp_params.data_bits = info->params.data_bits; 1088 tmp_params.stop_bits = info->params.stop_bits; 1089 tmp_params.parity = info->params.parity; 1090 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32))) 1091 return -EFAULT; 1092 return 0; 1093 } 1094 1095 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params) 1096 { 1097 struct MGSL_PARAMS32 tmp_params; 1098 1099 DBGINFO(("%s set_params32\n", info->device_name)); 1100 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32))) 1101 return -EFAULT; 1102 1103 spin_lock(&info->lock); 1104 if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) { 1105 info->base_clock = tmp_params.clock_speed; 1106 } else { 1107 info->params.mode = tmp_params.mode; 1108 info->params.loopback = tmp_params.loopback; 1109 info->params.flags = tmp_params.flags; 1110 info->params.encoding = tmp_params.encoding; 1111 info->params.clock_speed = tmp_params.clock_speed; 1112 info->params.addr_filter = tmp_params.addr_filter; 1113 info->params.crc_type = tmp_params.crc_type; 1114 info->params.preamble_length = tmp_params.preamble_length; 1115 info->params.preamble = tmp_params.preamble; 1116 info->params.data_rate = tmp_params.data_rate; 1117 info->params.data_bits = tmp_params.data_bits; 1118 info->params.stop_bits = tmp_params.stop_bits; 1119 info->params.parity = tmp_params.parity; 1120 } 1121 spin_unlock(&info->lock); 1122 1123 program_hw(info); 1124 1125 return 0; 1126 } 1127 1128 static long slgt_compat_ioctl(struct tty_struct *tty, 1129 unsigned int cmd, unsigned long arg) 1130 { 1131 struct slgt_info *info = tty->driver_data; 1132 int rc; 1133 1134 if (sanity_check(info, tty->name, "compat_ioctl")) 1135 return -ENODEV; 1136 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); 1137 1138 switch (cmd) { 1139 case MGSL_IOCSPARAMS32: 1140 rc = set_params32(info, compat_ptr(arg)); 1141 break; 1142 1143 case MGSL_IOCGPARAMS32: 1144 rc = get_params32(info, compat_ptr(arg)); 1145 break; 1146 1147 case MGSL_IOCGPARAMS: 1148 case MGSL_IOCSPARAMS: 1149 case MGSL_IOCGTXIDLE: 1150 case MGSL_IOCGSTATS: 1151 case MGSL_IOCWAITEVENT: 1152 case MGSL_IOCGIF: 1153 case MGSL_IOCSGPIO: 1154 case MGSL_IOCGGPIO: 1155 case MGSL_IOCWAITGPIO: 1156 case MGSL_IOCGXSYNC: 1157 case MGSL_IOCGXCTRL: 1158 rc = ioctl(tty, cmd, (unsigned long)compat_ptr(arg)); 1159 break; 1160 default: 1161 rc = ioctl(tty, cmd, arg); 1162 } 1163 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); 1164 return rc; 1165 } 1166 #else 1167 #define slgt_compat_ioctl NULL 1168 #endif /* ifdef CONFIG_COMPAT */ 1169 1170 /* 1171 * proc fs support 1172 */ 1173 static inline void line_info(struct seq_file *m, struct slgt_info *info) 1174 { 1175 char stat_buf[30]; 1176 unsigned long flags; 1177 1178 seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", 1179 info->device_name, info->phys_reg_addr, 1180 info->irq_level, info->max_frame_size); 1181 1182 /* output current serial signal states */ 1183 spin_lock_irqsave(&info->lock,flags); 1184 get_gtsignals(info); 1185 spin_unlock_irqrestore(&info->lock,flags); 1186 1187 stat_buf[0] = 0; 1188 stat_buf[1] = 0; 1189 if (info->signals & SerialSignal_RTS) 1190 strcat(stat_buf, "|RTS"); 1191 if (info->signals & SerialSignal_CTS) 1192 strcat(stat_buf, "|CTS"); 1193 if (info->signals & SerialSignal_DTR) 1194 strcat(stat_buf, "|DTR"); 1195 if (info->signals & SerialSignal_DSR) 1196 strcat(stat_buf, "|DSR"); 1197 if (info->signals & SerialSignal_DCD) 1198 strcat(stat_buf, "|CD"); 1199 if (info->signals & SerialSignal_RI) 1200 strcat(stat_buf, "|RI"); 1201 1202 if (info->params.mode != MGSL_MODE_ASYNC) { 1203 seq_printf(m, "\tHDLC txok:%d rxok:%d", 1204 info->icount.txok, info->icount.rxok); 1205 if (info->icount.txunder) 1206 seq_printf(m, " txunder:%d", info->icount.txunder); 1207 if (info->icount.txabort) 1208 seq_printf(m, " txabort:%d", info->icount.txabort); 1209 if (info->icount.rxshort) 1210 seq_printf(m, " rxshort:%d", info->icount.rxshort); 1211 if (info->icount.rxlong) 1212 seq_printf(m, " rxlong:%d", info->icount.rxlong); 1213 if (info->icount.rxover) 1214 seq_printf(m, " rxover:%d", info->icount.rxover); 1215 if (info->icount.rxcrc) 1216 seq_printf(m, " rxcrc:%d", info->icount.rxcrc); 1217 } else { 1218 seq_printf(m, "\tASYNC tx:%d rx:%d", 1219 info->icount.tx, info->icount.rx); 1220 if (info->icount.frame) 1221 seq_printf(m, " fe:%d", info->icount.frame); 1222 if (info->icount.parity) 1223 seq_printf(m, " pe:%d", info->icount.parity); 1224 if (info->icount.brk) 1225 seq_printf(m, " brk:%d", info->icount.brk); 1226 if (info->icount.overrun) 1227 seq_printf(m, " oe:%d", info->icount.overrun); 1228 } 1229 1230 /* Append serial signal status to end */ 1231 seq_printf(m, " %s\n", stat_buf+1); 1232 1233 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", 1234 info->tx_active,info->bh_requested,info->bh_running, 1235 info->pending_bh); 1236 } 1237 1238 /* Called to print information about devices 1239 */ 1240 static int synclink_gt_proc_show(struct seq_file *m, void *v) 1241 { 1242 struct slgt_info *info; 1243 1244 seq_puts(m, "synclink_gt driver\n"); 1245 1246 info = slgt_device_list; 1247 while( info ) { 1248 line_info(m, info); 1249 info = info->next_device; 1250 } 1251 return 0; 1252 } 1253 1254 /* 1255 * return count of bytes in transmit buffer 1256 */ 1257 static unsigned int chars_in_buffer(struct tty_struct *tty) 1258 { 1259 struct slgt_info *info = tty->driver_data; 1260 unsigned int count; 1261 if (sanity_check(info, tty->name, "chars_in_buffer")) 1262 return 0; 1263 count = tbuf_bytes(info); 1264 DBGINFO(("%s chars_in_buffer()=%u\n", info->device_name, count)); 1265 return count; 1266 } 1267 1268 /* 1269 * signal remote device to throttle send data (our receive data) 1270 */ 1271 static void throttle(struct tty_struct * tty) 1272 { 1273 struct slgt_info *info = tty->driver_data; 1274 unsigned long flags; 1275 1276 if (sanity_check(info, tty->name, "throttle")) 1277 return; 1278 DBGINFO(("%s throttle\n", info->device_name)); 1279 if (I_IXOFF(tty)) 1280 send_xchar(tty, STOP_CHAR(tty)); 1281 if (C_CRTSCTS(tty)) { 1282 spin_lock_irqsave(&info->lock,flags); 1283 info->signals &= ~SerialSignal_RTS; 1284 set_gtsignals(info); 1285 spin_unlock_irqrestore(&info->lock,flags); 1286 } 1287 } 1288 1289 /* 1290 * signal remote device to stop throttling send data (our receive data) 1291 */ 1292 static void unthrottle(struct tty_struct * tty) 1293 { 1294 struct slgt_info *info = tty->driver_data; 1295 unsigned long flags; 1296 1297 if (sanity_check(info, tty->name, "unthrottle")) 1298 return; 1299 DBGINFO(("%s unthrottle\n", info->device_name)); 1300 if (I_IXOFF(tty)) { 1301 if (info->x_char) 1302 info->x_char = 0; 1303 else 1304 send_xchar(tty, START_CHAR(tty)); 1305 } 1306 if (C_CRTSCTS(tty)) { 1307 spin_lock_irqsave(&info->lock,flags); 1308 info->signals |= SerialSignal_RTS; 1309 set_gtsignals(info); 1310 spin_unlock_irqrestore(&info->lock,flags); 1311 } 1312 } 1313 1314 /* 1315 * set or clear transmit break condition 1316 * break_state -1=set break condition, 0=clear 1317 */ 1318 static int set_break(struct tty_struct *tty, int break_state) 1319 { 1320 struct slgt_info *info = tty->driver_data; 1321 unsigned short value; 1322 unsigned long flags; 1323 1324 if (sanity_check(info, tty->name, "set_break")) 1325 return -EINVAL; 1326 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); 1327 1328 spin_lock_irqsave(&info->lock,flags); 1329 value = rd_reg16(info, TCR); 1330 if (break_state == -1) 1331 value |= BIT6; 1332 else 1333 value &= ~BIT6; 1334 wr_reg16(info, TCR, value); 1335 spin_unlock_irqrestore(&info->lock,flags); 1336 return 0; 1337 } 1338 1339 #if SYNCLINK_GENERIC_HDLC 1340 1341 /** 1342 * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) 1343 * @dev: pointer to network device structure 1344 * @encoding: serial encoding setting 1345 * @parity: FCS setting 1346 * 1347 * Set encoding and frame check sequence (FCS) options. 1348 * 1349 * Return: 0 if success, otherwise error code 1350 */ 1351 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, 1352 unsigned short parity) 1353 { 1354 struct slgt_info *info = dev_to_port(dev); 1355 unsigned char new_encoding; 1356 unsigned short new_crctype; 1357 1358 /* return error if TTY interface open */ 1359 if (info->port.count) 1360 return -EBUSY; 1361 1362 DBGINFO(("%s hdlcdev_attach\n", info->device_name)); 1363 1364 switch (encoding) 1365 { 1366 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; 1367 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; 1368 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; 1369 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; 1370 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; 1371 default: return -EINVAL; 1372 } 1373 1374 switch (parity) 1375 { 1376 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; 1377 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; 1378 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; 1379 default: return -EINVAL; 1380 } 1381 1382 info->params.encoding = new_encoding; 1383 info->params.crc_type = new_crctype; 1384 1385 /* if network interface up, reprogram hardware */ 1386 if (info->netcount) 1387 program_hw(info); 1388 1389 return 0; 1390 } 1391 1392 /** 1393 * hdlcdev_xmit - called by generic HDLC layer to send a frame 1394 * @skb: socket buffer containing HDLC frame 1395 * @dev: pointer to network device structure 1396 */ 1397 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, 1398 struct net_device *dev) 1399 { 1400 struct slgt_info *info = dev_to_port(dev); 1401 unsigned long flags; 1402 1403 DBGINFO(("%s hdlc_xmit\n", dev->name)); 1404 1405 if (!skb->len) 1406 return NETDEV_TX_OK; 1407 1408 /* stop sending until this frame completes */ 1409 netif_stop_queue(dev); 1410 1411 /* update network statistics */ 1412 dev->stats.tx_packets++; 1413 dev->stats.tx_bytes += skb->len; 1414 1415 /* save start time for transmit timeout detection */ 1416 netif_trans_update(dev); 1417 1418 spin_lock_irqsave(&info->lock, flags); 1419 tx_load(info, skb->data, skb->len); 1420 spin_unlock_irqrestore(&info->lock, flags); 1421 1422 /* done with socket buffer, so free it */ 1423 dev_kfree_skb(skb); 1424 1425 return NETDEV_TX_OK; 1426 } 1427 1428 /** 1429 * hdlcdev_open - called by network layer when interface enabled 1430 * @dev: pointer to network device structure 1431 * 1432 * Claim resources and initialize hardware. 1433 * 1434 * Return: 0 if success, otherwise error code 1435 */ 1436 static int hdlcdev_open(struct net_device *dev) 1437 { 1438 struct slgt_info *info = dev_to_port(dev); 1439 int rc; 1440 unsigned long flags; 1441 1442 if (!try_module_get(THIS_MODULE)) 1443 return -EBUSY; 1444 1445 DBGINFO(("%s hdlcdev_open\n", dev->name)); 1446 1447 /* generic HDLC layer open processing */ 1448 rc = hdlc_open(dev); 1449 if (rc) 1450 return rc; 1451 1452 /* arbitrate between network and tty opens */ 1453 spin_lock_irqsave(&info->netlock, flags); 1454 if (info->port.count != 0 || info->netcount != 0) { 1455 DBGINFO(("%s hdlc_open busy\n", dev->name)); 1456 spin_unlock_irqrestore(&info->netlock, flags); 1457 return -EBUSY; 1458 } 1459 info->netcount=1; 1460 spin_unlock_irqrestore(&info->netlock, flags); 1461 1462 /* claim resources and init adapter */ 1463 if ((rc = startup(info)) != 0) { 1464 spin_lock_irqsave(&info->netlock, flags); 1465 info->netcount=0; 1466 spin_unlock_irqrestore(&info->netlock, flags); 1467 return rc; 1468 } 1469 1470 /* assert RTS and DTR, apply hardware settings */ 1471 info->signals |= SerialSignal_RTS | SerialSignal_DTR; 1472 program_hw(info); 1473 1474 /* enable network layer transmit */ 1475 netif_trans_update(dev); 1476 netif_start_queue(dev); 1477 1478 /* inform generic HDLC layer of current DCD status */ 1479 spin_lock_irqsave(&info->lock, flags); 1480 get_gtsignals(info); 1481 spin_unlock_irqrestore(&info->lock, flags); 1482 if (info->signals & SerialSignal_DCD) 1483 netif_carrier_on(dev); 1484 else 1485 netif_carrier_off(dev); 1486 return 0; 1487 } 1488 1489 /** 1490 * hdlcdev_close - called by network layer when interface is disabled 1491 * @dev: pointer to network device structure 1492 * 1493 * Shutdown hardware and release resources. 1494 * 1495 * Return: 0 if success, otherwise error code 1496 */ 1497 static int hdlcdev_close(struct net_device *dev) 1498 { 1499 struct slgt_info *info = dev_to_port(dev); 1500 unsigned long flags; 1501 1502 DBGINFO(("%s hdlcdev_close\n", dev->name)); 1503 1504 netif_stop_queue(dev); 1505 1506 /* shutdown adapter and release resources */ 1507 shutdown(info); 1508 1509 hdlc_close(dev); 1510 1511 spin_lock_irqsave(&info->netlock, flags); 1512 info->netcount=0; 1513 spin_unlock_irqrestore(&info->netlock, flags); 1514 1515 module_put(THIS_MODULE); 1516 return 0; 1517 } 1518 1519 /** 1520 * hdlcdev_ioctl - called by network layer to process IOCTL call to network device 1521 * @dev: pointer to network device structure 1522 * @ifr: pointer to network interface request structure 1523 * @cmd: IOCTL command code 1524 * 1525 * Return: 0 if success, otherwise error code 1526 */ 1527 static int hdlcdev_ioctl(struct net_device *dev, struct if_settings *ifs) 1528 { 1529 const size_t size = sizeof(sync_serial_settings); 1530 sync_serial_settings new_line; 1531 sync_serial_settings __user *line = ifs->ifs_ifsu.sync; 1532 struct slgt_info *info = dev_to_port(dev); 1533 unsigned int flags; 1534 1535 DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); 1536 1537 /* return error if TTY interface open */ 1538 if (info->port.count) 1539 return -EBUSY; 1540 1541 memset(&new_line, 0, sizeof(new_line)); 1542 1543 switch (ifs->type) { 1544 case IF_GET_IFACE: /* return current sync_serial_settings */ 1545 1546 ifs->type = IF_IFACE_SYNC_SERIAL; 1547 if (ifs->size < size) { 1548 ifs->size = size; /* data size wanted */ 1549 return -ENOBUFS; 1550 } 1551 1552 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | 1553 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | 1554 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | 1555 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); 1556 1557 switch (flags){ 1558 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; 1559 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; 1560 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; 1561 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; 1562 default: new_line.clock_type = CLOCK_DEFAULT; 1563 } 1564 1565 new_line.clock_rate = info->params.clock_speed; 1566 new_line.loopback = info->params.loopback ? 1:0; 1567 1568 if (copy_to_user(line, &new_line, size)) 1569 return -EFAULT; 1570 return 0; 1571 1572 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ 1573 1574 if(!capable(CAP_NET_ADMIN)) 1575 return -EPERM; 1576 if (copy_from_user(&new_line, line, size)) 1577 return -EFAULT; 1578 1579 switch (new_line.clock_type) 1580 { 1581 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; 1582 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; 1583 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; 1584 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; 1585 case CLOCK_DEFAULT: flags = info->params.flags & 1586 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | 1587 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | 1588 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | 1589 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; 1590 default: return -EINVAL; 1591 } 1592 1593 if (new_line.loopback != 0 && new_line.loopback != 1) 1594 return -EINVAL; 1595 1596 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | 1597 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | 1598 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | 1599 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); 1600 info->params.flags |= flags; 1601 1602 info->params.loopback = new_line.loopback; 1603 1604 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) 1605 info->params.clock_speed = new_line.clock_rate; 1606 else 1607 info->params.clock_speed = 0; 1608 1609 /* if network interface up, reprogram hardware */ 1610 if (info->netcount) 1611 program_hw(info); 1612 return 0; 1613 1614 default: 1615 return hdlc_ioctl(dev, ifs); 1616 } 1617 } 1618 1619 /** 1620 * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected 1621 * @dev: pointer to network device structure 1622 * @txqueue: unused 1623 */ 1624 static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) 1625 { 1626 struct slgt_info *info = dev_to_port(dev); 1627 unsigned long flags; 1628 1629 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); 1630 1631 dev->stats.tx_errors++; 1632 dev->stats.tx_aborted_errors++; 1633 1634 spin_lock_irqsave(&info->lock,flags); 1635 tx_stop(info); 1636 spin_unlock_irqrestore(&info->lock,flags); 1637 1638 netif_wake_queue(dev); 1639 } 1640 1641 /** 1642 * hdlcdev_tx_done - called by device driver when transmit completes 1643 * @info: pointer to device instance information 1644 * 1645 * Reenable network layer transmit if stopped. 1646 */ 1647 static void hdlcdev_tx_done(struct slgt_info *info) 1648 { 1649 if (netif_queue_stopped(info->netdev)) 1650 netif_wake_queue(info->netdev); 1651 } 1652 1653 /** 1654 * hdlcdev_rx - called by device driver when frame received 1655 * @info: pointer to device instance information 1656 * @buf: pointer to buffer contianing frame data 1657 * @size: count of data bytes in buf 1658 * 1659 * Pass frame to network layer. 1660 */ 1661 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) 1662 { 1663 struct sk_buff *skb = dev_alloc_skb(size); 1664 struct net_device *dev = info->netdev; 1665 1666 DBGINFO(("%s hdlcdev_rx\n", dev->name)); 1667 1668 if (skb == NULL) { 1669 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); 1670 dev->stats.rx_dropped++; 1671 return; 1672 } 1673 1674 skb_put_data(skb, buf, size); 1675 1676 skb->protocol = hdlc_type_trans(skb, dev); 1677 1678 dev->stats.rx_packets++; 1679 dev->stats.rx_bytes += size; 1680 1681 netif_rx(skb); 1682 } 1683 1684 static const struct net_device_ops hdlcdev_ops = { 1685 .ndo_open = hdlcdev_open, 1686 .ndo_stop = hdlcdev_close, 1687 .ndo_start_xmit = hdlc_start_xmit, 1688 .ndo_siocwandev = hdlcdev_ioctl, 1689 .ndo_tx_timeout = hdlcdev_tx_timeout, 1690 }; 1691 1692 /** 1693 * hdlcdev_init - called by device driver when adding device instance 1694 * @info: pointer to device instance information 1695 * 1696 * Do generic HDLC initialization. 1697 * 1698 * Return: 0 if success, otherwise error code 1699 */ 1700 static int hdlcdev_init(struct slgt_info *info) 1701 { 1702 int rc; 1703 struct net_device *dev; 1704 hdlc_device *hdlc; 1705 1706 /* allocate and initialize network and HDLC layer objects */ 1707 1708 dev = alloc_hdlcdev(info); 1709 if (!dev) { 1710 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); 1711 return -ENOMEM; 1712 } 1713 1714 /* for network layer reporting purposes only */ 1715 dev->mem_start = info->phys_reg_addr; 1716 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; 1717 dev->irq = info->irq_level; 1718 1719 /* network layer callbacks and settings */ 1720 dev->netdev_ops = &hdlcdev_ops; 1721 dev->watchdog_timeo = 10 * HZ; 1722 dev->tx_queue_len = 50; 1723 1724 /* generic HDLC layer callbacks and settings */ 1725 hdlc = dev_to_hdlc(dev); 1726 hdlc->attach = hdlcdev_attach; 1727 hdlc->xmit = hdlcdev_xmit; 1728 1729 /* register objects with HDLC layer */ 1730 rc = register_hdlc_device(dev); 1731 if (rc) { 1732 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); 1733 free_netdev(dev); 1734 return rc; 1735 } 1736 1737 info->netdev = dev; 1738 return 0; 1739 } 1740 1741 /** 1742 * hdlcdev_exit - called by device driver when removing device instance 1743 * @info: pointer to device instance information 1744 * 1745 * Do generic HDLC cleanup. 1746 */ 1747 static void hdlcdev_exit(struct slgt_info *info) 1748 { 1749 unregister_hdlc_device(info->netdev); 1750 free_netdev(info->netdev); 1751 info->netdev = NULL; 1752 } 1753 1754 #endif /* ifdef CONFIG_HDLC */ 1755 1756 /* 1757 * get async data from rx DMA buffers 1758 */ 1759 static void rx_async(struct slgt_info *info) 1760 { 1761 struct mgsl_icount *icount = &info->icount; 1762 unsigned int start, end; 1763 unsigned char *p; 1764 unsigned char status; 1765 struct slgt_desc *bufs = info->rbufs; 1766 int i, count; 1767 int chars = 0; 1768 int stat; 1769 unsigned char ch; 1770 1771 start = end = info->rbuf_current; 1772 1773 while(desc_complete(bufs[end])) { 1774 count = desc_count(bufs[end]) - info->rbuf_index; 1775 p = bufs[end].buf + info->rbuf_index; 1776 1777 DBGISR(("%s rx_async count=%d\n", info->device_name, count)); 1778 DBGDATA(info, p, count, "rx"); 1779 1780 for(i=0 ; i < count; i+=2, p+=2) { 1781 ch = *p; 1782 icount->rx++; 1783 1784 stat = 0; 1785 1786 status = *(p + 1) & (BIT1 + BIT0); 1787 if (status) { 1788 if (status & BIT1) 1789 icount->parity++; 1790 else if (status & BIT0) 1791 icount->frame++; 1792 /* discard char if tty control flags say so */ 1793 if (status & info->ignore_status_mask) 1794 continue; 1795 if (status & BIT1) 1796 stat = TTY_PARITY; 1797 else if (status & BIT0) 1798 stat = TTY_FRAME; 1799 } 1800 tty_insert_flip_char(&info->port, ch, stat); 1801 chars++; 1802 } 1803 1804 if (i < count) { 1805 /* receive buffer not completed */ 1806 info->rbuf_index += i; 1807 mod_timer(&info->rx_timer, jiffies + 1); 1808 break; 1809 } 1810 1811 info->rbuf_index = 0; 1812 free_rbufs(info, end, end); 1813 1814 if (++end == info->rbuf_count) 1815 end = 0; 1816 1817 /* if entire list searched then no frame available */ 1818 if (end == start) 1819 break; 1820 } 1821 1822 if (chars) 1823 tty_flip_buffer_push(&info->port); 1824 } 1825 1826 /* 1827 * return next bottom half action to perform 1828 */ 1829 static int bh_action(struct slgt_info *info) 1830 { 1831 unsigned long flags; 1832 int rc; 1833 1834 spin_lock_irqsave(&info->lock,flags); 1835 1836 if (info->pending_bh & BH_RECEIVE) { 1837 info->pending_bh &= ~BH_RECEIVE; 1838 rc = BH_RECEIVE; 1839 } else if (info->pending_bh & BH_TRANSMIT) { 1840 info->pending_bh &= ~BH_TRANSMIT; 1841 rc = BH_TRANSMIT; 1842 } else if (info->pending_bh & BH_STATUS) { 1843 info->pending_bh &= ~BH_STATUS; 1844 rc = BH_STATUS; 1845 } else { 1846 /* Mark BH routine as complete */ 1847 info->bh_running = false; 1848 info->bh_requested = false; 1849 rc = 0; 1850 } 1851 1852 spin_unlock_irqrestore(&info->lock,flags); 1853 1854 return rc; 1855 } 1856 1857 /* 1858 * perform bottom half processing 1859 */ 1860 static void bh_handler(struct work_struct *work) 1861 { 1862 struct slgt_info *info = container_of(work, struct slgt_info, task); 1863 int action; 1864 1865 info->bh_running = true; 1866 1867 while((action = bh_action(info))) { 1868 switch (action) { 1869 case BH_RECEIVE: 1870 DBGBH(("%s bh receive\n", info->device_name)); 1871 switch(info->params.mode) { 1872 case MGSL_MODE_ASYNC: 1873 rx_async(info); 1874 break; 1875 case MGSL_MODE_HDLC: 1876 while(rx_get_frame(info)); 1877 break; 1878 case MGSL_MODE_RAW: 1879 case MGSL_MODE_MONOSYNC: 1880 case MGSL_MODE_BISYNC: 1881 case MGSL_MODE_XSYNC: 1882 while(rx_get_buf(info)); 1883 break; 1884 } 1885 /* restart receiver if rx DMA buffers exhausted */ 1886 if (info->rx_restart) 1887 rx_start(info); 1888 break; 1889 case BH_TRANSMIT: 1890 bh_transmit(info); 1891 break; 1892 case BH_STATUS: 1893 DBGBH(("%s bh status\n", info->device_name)); 1894 info->ri_chkcount = 0; 1895 info->dsr_chkcount = 0; 1896 info->dcd_chkcount = 0; 1897 info->cts_chkcount = 0; 1898 break; 1899 default: 1900 DBGBH(("%s unknown action\n", info->device_name)); 1901 break; 1902 } 1903 } 1904 DBGBH(("%s bh_handler exit\n", info->device_name)); 1905 } 1906 1907 static void bh_transmit(struct slgt_info *info) 1908 { 1909 struct tty_struct *tty = info->port.tty; 1910 1911 DBGBH(("%s bh_transmit\n", info->device_name)); 1912 if (tty) 1913 tty_wakeup(tty); 1914 } 1915 1916 static void dsr_change(struct slgt_info *info, unsigned short status) 1917 { 1918 if (status & BIT3) { 1919 info->signals |= SerialSignal_DSR; 1920 info->input_signal_events.dsr_up++; 1921 } else { 1922 info->signals &= ~SerialSignal_DSR; 1923 info->input_signal_events.dsr_down++; 1924 } 1925 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); 1926 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { 1927 slgt_irq_off(info, IRQ_DSR); 1928 return; 1929 } 1930 info->icount.dsr++; 1931 wake_up_interruptible(&info->status_event_wait_q); 1932 wake_up_interruptible(&info->event_wait_q); 1933 info->pending_bh |= BH_STATUS; 1934 } 1935 1936 static void cts_change(struct slgt_info *info, unsigned short status) 1937 { 1938 if (status & BIT2) { 1939 info->signals |= SerialSignal_CTS; 1940 info->input_signal_events.cts_up++; 1941 } else { 1942 info->signals &= ~SerialSignal_CTS; 1943 info->input_signal_events.cts_down++; 1944 } 1945 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); 1946 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { 1947 slgt_irq_off(info, IRQ_CTS); 1948 return; 1949 } 1950 info->icount.cts++; 1951 wake_up_interruptible(&info->status_event_wait_q); 1952 wake_up_interruptible(&info->event_wait_q); 1953 info->pending_bh |= BH_STATUS; 1954 1955 if (tty_port_cts_enabled(&info->port)) { 1956 if (info->port.tty) { 1957 if (info->port.tty->hw_stopped) { 1958 if (info->signals & SerialSignal_CTS) { 1959 info->port.tty->hw_stopped = 0; 1960 info->pending_bh |= BH_TRANSMIT; 1961 return; 1962 } 1963 } else { 1964 if (!(info->signals & SerialSignal_CTS)) 1965 info->port.tty->hw_stopped = 1; 1966 } 1967 } 1968 } 1969 } 1970 1971 static void dcd_change(struct slgt_info *info, unsigned short status) 1972 { 1973 if (status & BIT1) { 1974 info->signals |= SerialSignal_DCD; 1975 info->input_signal_events.dcd_up++; 1976 } else { 1977 info->signals &= ~SerialSignal_DCD; 1978 info->input_signal_events.dcd_down++; 1979 } 1980 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); 1981 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { 1982 slgt_irq_off(info, IRQ_DCD); 1983 return; 1984 } 1985 info->icount.dcd++; 1986 #if SYNCLINK_GENERIC_HDLC 1987 if (info->netcount) { 1988 if (info->signals & SerialSignal_DCD) 1989 netif_carrier_on(info->netdev); 1990 else 1991 netif_carrier_off(info->netdev); 1992 } 1993 #endif 1994 wake_up_interruptible(&info->status_event_wait_q); 1995 wake_up_interruptible(&info->event_wait_q); 1996 info->pending_bh |= BH_STATUS; 1997 1998 if (tty_port_check_carrier(&info->port)) { 1999 if (info->signals & SerialSignal_DCD) 2000 wake_up_interruptible(&info->port.open_wait); 2001 else { 2002 if (info->port.tty) 2003 tty_hangup(info->port.tty); 2004 } 2005 } 2006 } 2007 2008 static void ri_change(struct slgt_info *info, unsigned short status) 2009 { 2010 if (status & BIT0) { 2011 info->signals |= SerialSignal_RI; 2012 info->input_signal_events.ri_up++; 2013 } else { 2014 info->signals &= ~SerialSignal_RI; 2015 info->input_signal_events.ri_down++; 2016 } 2017 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); 2018 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { 2019 slgt_irq_off(info, IRQ_RI); 2020 return; 2021 } 2022 info->icount.rng++; 2023 wake_up_interruptible(&info->status_event_wait_q); 2024 wake_up_interruptible(&info->event_wait_q); 2025 info->pending_bh |= BH_STATUS; 2026 } 2027 2028 static void isr_rxdata(struct slgt_info *info) 2029 { 2030 unsigned int count = info->rbuf_fill_count; 2031 unsigned int i = info->rbuf_fill_index; 2032 unsigned short reg; 2033 2034 while (rd_reg16(info, SSR) & IRQ_RXDATA) { 2035 reg = rd_reg16(info, RDR); 2036 DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); 2037 if (desc_complete(info->rbufs[i])) { 2038 /* all buffers full */ 2039 rx_stop(info); 2040 info->rx_restart = true; 2041 continue; 2042 } 2043 info->rbufs[i].buf[count++] = (unsigned char)reg; 2044 /* async mode saves status byte to buffer for each data byte */ 2045 if (info->params.mode == MGSL_MODE_ASYNC) 2046 info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); 2047 if (count == info->rbuf_fill_level || (reg & BIT10)) { 2048 /* buffer full or end of frame */ 2049 set_desc_count(info->rbufs[i], count); 2050 set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); 2051 info->rbuf_fill_count = count = 0; 2052 if (++i == info->rbuf_count) 2053 i = 0; 2054 info->pending_bh |= BH_RECEIVE; 2055 } 2056 } 2057 2058 info->rbuf_fill_index = i; 2059 info->rbuf_fill_count = count; 2060 } 2061 2062 static void isr_serial(struct slgt_info *info) 2063 { 2064 unsigned short status = rd_reg16(info, SSR); 2065 2066 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); 2067 2068 wr_reg16(info, SSR, status); /* clear pending */ 2069 2070 info->irq_occurred = true; 2071 2072 if (info->params.mode == MGSL_MODE_ASYNC) { 2073 if (status & IRQ_TXIDLE) { 2074 if (info->tx_active) 2075 isr_txeom(info, status); 2076 } 2077 if (info->rx_pio && (status & IRQ_RXDATA)) 2078 isr_rxdata(info); 2079 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { 2080 info->icount.brk++; 2081 /* process break detection if tty control allows */ 2082 if (info->port.tty) { 2083 if (!(status & info->ignore_status_mask)) { 2084 if (info->read_status_mask & MASK_BREAK) { 2085 tty_insert_flip_char(&info->port, 0, TTY_BREAK); 2086 if (info->port.flags & ASYNC_SAK) 2087 do_SAK(info->port.tty); 2088 } 2089 } 2090 } 2091 } 2092 } else { 2093 if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) 2094 isr_txeom(info, status); 2095 if (info->rx_pio && (status & IRQ_RXDATA)) 2096 isr_rxdata(info); 2097 if (status & IRQ_RXIDLE) { 2098 if (status & RXIDLE) 2099 info->icount.rxidle++; 2100 else 2101 info->icount.exithunt++; 2102 wake_up_interruptible(&info->event_wait_q); 2103 } 2104 2105 if (status & IRQ_RXOVER) 2106 rx_start(info); 2107 } 2108 2109 if (status & IRQ_DSR) 2110 dsr_change(info, status); 2111 if (status & IRQ_CTS) 2112 cts_change(info, status); 2113 if (status & IRQ_DCD) 2114 dcd_change(info, status); 2115 if (status & IRQ_RI) 2116 ri_change(info, status); 2117 } 2118 2119 static void isr_rdma(struct slgt_info *info) 2120 { 2121 unsigned int status = rd_reg32(info, RDCSR); 2122 2123 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); 2124 2125 /* RDCSR (rx DMA control/status) 2126 * 2127 * 31..07 reserved 2128 * 06 save status byte to DMA buffer 2129 * 05 error 2130 * 04 eol (end of list) 2131 * 03 eob (end of buffer) 2132 * 02 IRQ enable 2133 * 01 reset 2134 * 00 enable 2135 */ 2136 wr_reg32(info, RDCSR, status); /* clear pending */ 2137 2138 if (status & (BIT5 + BIT4)) { 2139 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); 2140 info->rx_restart = true; 2141 } 2142 info->pending_bh |= BH_RECEIVE; 2143 } 2144 2145 static void isr_tdma(struct slgt_info *info) 2146 { 2147 unsigned int status = rd_reg32(info, TDCSR); 2148 2149 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); 2150 2151 /* TDCSR (tx DMA control/status) 2152 * 2153 * 31..06 reserved 2154 * 05 error 2155 * 04 eol (end of list) 2156 * 03 eob (end of buffer) 2157 * 02 IRQ enable 2158 * 01 reset 2159 * 00 enable 2160 */ 2161 wr_reg32(info, TDCSR, status); /* clear pending */ 2162 2163 if (status & (BIT5 + BIT4 + BIT3)) { 2164 // another transmit buffer has completed 2165 // run bottom half to get more send data from user 2166 info->pending_bh |= BH_TRANSMIT; 2167 } 2168 } 2169 2170 /* 2171 * return true if there are unsent tx DMA buffers, otherwise false 2172 * 2173 * if there are unsent buffers then info->tbuf_start 2174 * is set to index of first unsent buffer 2175 */ 2176 static bool unsent_tbufs(struct slgt_info *info) 2177 { 2178 unsigned int i = info->tbuf_current; 2179 bool rc = false; 2180 2181 /* 2182 * search backwards from last loaded buffer (precedes tbuf_current) 2183 * for first unsent buffer (desc_count > 0) 2184 */ 2185 2186 do { 2187 if (i) 2188 i--; 2189 else 2190 i = info->tbuf_count - 1; 2191 if (!desc_count(info->tbufs[i])) 2192 break; 2193 info->tbuf_start = i; 2194 rc = true; 2195 } while (i != info->tbuf_current); 2196 2197 return rc; 2198 } 2199 2200 static void isr_txeom(struct slgt_info *info, unsigned short status) 2201 { 2202 DBGISR(("%s txeom status=%04x\n", info->device_name, status)); 2203 2204 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); 2205 tdma_reset(info); 2206 if (status & IRQ_TXUNDER) { 2207 unsigned short val = rd_reg16(info, TCR); 2208 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ 2209 wr_reg16(info, TCR, val); /* clear reset bit */ 2210 } 2211 2212 if (info->tx_active) { 2213 if (info->params.mode != MGSL_MODE_ASYNC) { 2214 if (status & IRQ_TXUNDER) 2215 info->icount.txunder++; 2216 else if (status & IRQ_TXIDLE) 2217 info->icount.txok++; 2218 } 2219 2220 if (unsent_tbufs(info)) { 2221 tx_start(info); 2222 update_tx_timer(info); 2223 return; 2224 } 2225 info->tx_active = false; 2226 2227 del_timer(&info->tx_timer); 2228 2229 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { 2230 info->signals &= ~SerialSignal_RTS; 2231 info->drop_rts_on_tx_done = false; 2232 set_gtsignals(info); 2233 } 2234 2235 #if SYNCLINK_GENERIC_HDLC 2236 if (info->netcount) 2237 hdlcdev_tx_done(info); 2238 else 2239 #endif 2240 { 2241 if (info->port.tty && (info->port.tty->flow.stopped || info->port.tty->hw_stopped)) { 2242 tx_stop(info); 2243 return; 2244 } 2245 info->pending_bh |= BH_TRANSMIT; 2246 } 2247 } 2248 } 2249 2250 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state) 2251 { 2252 struct cond_wait *w, *prev; 2253 2254 /* wake processes waiting for specific transitions */ 2255 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) { 2256 if (w->data & changed) { 2257 w->data = state; 2258 wake_up_interruptible(&w->q); 2259 if (prev != NULL) 2260 prev->next = w->next; 2261 else 2262 info->gpio_wait_q = w->next; 2263 } else 2264 prev = w; 2265 } 2266 } 2267 2268 /* interrupt service routine 2269 * 2270 * irq interrupt number 2271 * dev_id device ID supplied during interrupt registration 2272 */ 2273 static irqreturn_t slgt_interrupt(int dummy, void *dev_id) 2274 { 2275 struct slgt_info *info = dev_id; 2276 unsigned int gsr; 2277 unsigned int i; 2278 2279 DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level)); 2280 2281 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { 2282 DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); 2283 info->irq_occurred = true; 2284 for(i=0; i < info->port_count ; i++) { 2285 if (info->port_array[i] == NULL) 2286 continue; 2287 spin_lock(&info->port_array[i]->lock); 2288 if (gsr & (BIT8 << i)) 2289 isr_serial(info->port_array[i]); 2290 if (gsr & (BIT16 << (i*2))) 2291 isr_rdma(info->port_array[i]); 2292 if (gsr & (BIT17 << (i*2))) 2293 isr_tdma(info->port_array[i]); 2294 spin_unlock(&info->port_array[i]->lock); 2295 } 2296 } 2297 2298 if (info->gpio_present) { 2299 unsigned int state; 2300 unsigned int changed; 2301 spin_lock(&info->lock); 2302 while ((changed = rd_reg32(info, IOSR)) != 0) { 2303 DBGISR(("%s iosr=%08x\n", info->device_name, changed)); 2304 /* read latched state of GPIO signals */ 2305 state = rd_reg32(info, IOVR); 2306 /* clear pending GPIO interrupt bits */ 2307 wr_reg32(info, IOSR, changed); 2308 for (i=0 ; i < info->port_count ; i++) { 2309 if (info->port_array[i] != NULL) 2310 isr_gpio(info->port_array[i], changed, state); 2311 } 2312 } 2313 spin_unlock(&info->lock); 2314 } 2315 2316 for(i=0; i < info->port_count ; i++) { 2317 struct slgt_info *port = info->port_array[i]; 2318 if (port == NULL) 2319 continue; 2320 spin_lock(&port->lock); 2321 if ((port->port.count || port->netcount) && 2322 port->pending_bh && !port->bh_running && 2323 !port->bh_requested) { 2324 DBGISR(("%s bh queued\n", port->device_name)); 2325 schedule_work(&port->task); 2326 port->bh_requested = true; 2327 } 2328 spin_unlock(&port->lock); 2329 } 2330 2331 DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level)); 2332 return IRQ_HANDLED; 2333 } 2334 2335 static int startup(struct slgt_info *info) 2336 { 2337 DBGINFO(("%s startup\n", info->device_name)); 2338 2339 if (tty_port_initialized(&info->port)) 2340 return 0; 2341 2342 if (!info->tx_buf) { 2343 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); 2344 if (!info->tx_buf) { 2345 DBGERR(("%s can't allocate tx buffer\n", info->device_name)); 2346 return -ENOMEM; 2347 } 2348 } 2349 2350 info->pending_bh = 0; 2351 2352 memset(&info->icount, 0, sizeof(info->icount)); 2353 2354 /* program hardware for current parameters */ 2355 change_params(info); 2356 2357 if (info->port.tty) 2358 clear_bit(TTY_IO_ERROR, &info->port.tty->flags); 2359 2360 tty_port_set_initialized(&info->port, 1); 2361 2362 return 0; 2363 } 2364 2365 /* 2366 * called by close() and hangup() to shutdown hardware 2367 */ 2368 static void shutdown(struct slgt_info *info) 2369 { 2370 unsigned long flags; 2371 2372 if (!tty_port_initialized(&info->port)) 2373 return; 2374 2375 DBGINFO(("%s shutdown\n", info->device_name)); 2376 2377 /* clear status wait queue because status changes */ 2378 /* can't happen after shutting down the hardware */ 2379 wake_up_interruptible(&info->status_event_wait_q); 2380 wake_up_interruptible(&info->event_wait_q); 2381 2382 del_timer_sync(&info->tx_timer); 2383 del_timer_sync(&info->rx_timer); 2384 2385 kfree(info->tx_buf); 2386 info->tx_buf = NULL; 2387 2388 spin_lock_irqsave(&info->lock,flags); 2389 2390 tx_stop(info); 2391 rx_stop(info); 2392 2393 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); 2394 2395 if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { 2396 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); 2397 set_gtsignals(info); 2398 } 2399 2400 flush_cond_wait(&info->gpio_wait_q); 2401 2402 spin_unlock_irqrestore(&info->lock,flags); 2403 2404 if (info->port.tty) 2405 set_bit(TTY_IO_ERROR, &info->port.tty->flags); 2406 2407 tty_port_set_initialized(&info->port, 0); 2408 } 2409 2410 static void program_hw(struct slgt_info *info) 2411 { 2412 unsigned long flags; 2413 2414 spin_lock_irqsave(&info->lock,flags); 2415 2416 rx_stop(info); 2417 tx_stop(info); 2418 2419 if (info->params.mode != MGSL_MODE_ASYNC || 2420 info->netcount) 2421 sync_mode(info); 2422 else 2423 async_mode(info); 2424 2425 set_gtsignals(info); 2426 2427 info->dcd_chkcount = 0; 2428 info->cts_chkcount = 0; 2429 info->ri_chkcount = 0; 2430 info->dsr_chkcount = 0; 2431 2432 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); 2433 get_gtsignals(info); 2434 2435 if (info->netcount || 2436 (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) 2437 rx_start(info); 2438 2439 spin_unlock_irqrestore(&info->lock,flags); 2440 } 2441 2442 /* 2443 * reconfigure adapter based on new parameters 2444 */ 2445 static void change_params(struct slgt_info *info) 2446 { 2447 unsigned cflag; 2448 int bits_per_char; 2449 2450 if (!info->port.tty) 2451 return; 2452 DBGINFO(("%s change_params\n", info->device_name)); 2453 2454 cflag = info->port.tty->termios.c_cflag; 2455 2456 /* if B0 rate (hangup) specified then negate RTS and DTR */ 2457 /* otherwise assert RTS and DTR */ 2458 if (cflag & CBAUD) 2459 info->signals |= SerialSignal_RTS | SerialSignal_DTR; 2460 else 2461 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); 2462 2463 /* byte size and parity */ 2464 2465 info->params.data_bits = tty_get_char_size(cflag); 2466 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; 2467 2468 if (cflag & PARENB) 2469 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; 2470 else 2471 info->params.parity = ASYNC_PARITY_NONE; 2472 2473 /* calculate number of jiffies to transmit a full 2474 * FIFO (32 bytes) at specified data rate 2475 */ 2476 bits_per_char = info->params.data_bits + 2477 info->params.stop_bits + 1; 2478 2479 info->params.data_rate = tty_get_baud_rate(info->port.tty); 2480 2481 if (info->params.data_rate) { 2482 info->timeout = (32*HZ*bits_per_char) / 2483 info->params.data_rate; 2484 } 2485 info->timeout += HZ/50; /* Add .02 seconds of slop */ 2486 2487 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); 2488 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); 2489 2490 /* process tty input control flags */ 2491 2492 info->read_status_mask = IRQ_RXOVER; 2493 if (I_INPCK(info->port.tty)) 2494 info->read_status_mask |= MASK_PARITY | MASK_FRAMING; 2495 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) 2496 info->read_status_mask |= MASK_BREAK; 2497 if (I_IGNPAR(info->port.tty)) 2498 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; 2499 if (I_IGNBRK(info->port.tty)) { 2500 info->ignore_status_mask |= MASK_BREAK; 2501 /* If ignoring parity and break indicators, ignore 2502 * overruns too. (For real raw support). 2503 */ 2504 if (I_IGNPAR(info->port.tty)) 2505 info->ignore_status_mask |= MASK_OVERRUN; 2506 } 2507 2508 program_hw(info); 2509 } 2510 2511 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) 2512 { 2513 DBGINFO(("%s get_stats\n", info->device_name)); 2514 if (!user_icount) { 2515 memset(&info->icount, 0, sizeof(info->icount)); 2516 } else { 2517 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) 2518 return -EFAULT; 2519 } 2520 return 0; 2521 } 2522 2523 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) 2524 { 2525 DBGINFO(("%s get_params\n", info->device_name)); 2526 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) 2527 return -EFAULT; 2528 return 0; 2529 } 2530 2531 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) 2532 { 2533 unsigned long flags; 2534 MGSL_PARAMS tmp_params; 2535 2536 DBGINFO(("%s set_params\n", info->device_name)); 2537 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) 2538 return -EFAULT; 2539 2540 spin_lock_irqsave(&info->lock, flags); 2541 if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) 2542 info->base_clock = tmp_params.clock_speed; 2543 else 2544 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); 2545 spin_unlock_irqrestore(&info->lock, flags); 2546 2547 program_hw(info); 2548 2549 return 0; 2550 } 2551 2552 static int get_txidle(struct slgt_info *info, int __user *idle_mode) 2553 { 2554 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); 2555 if (put_user(info->idle_mode, idle_mode)) 2556 return -EFAULT; 2557 return 0; 2558 } 2559 2560 static int set_txidle(struct slgt_info *info, int idle_mode) 2561 { 2562 unsigned long flags; 2563 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); 2564 spin_lock_irqsave(&info->lock,flags); 2565 info->idle_mode = idle_mode; 2566 if (info->params.mode != MGSL_MODE_ASYNC) 2567 tx_set_idle(info); 2568 spin_unlock_irqrestore(&info->lock,flags); 2569 return 0; 2570 } 2571 2572 static int tx_enable(struct slgt_info *info, int enable) 2573 { 2574 unsigned long flags; 2575 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); 2576 spin_lock_irqsave(&info->lock,flags); 2577 if (enable) { 2578 if (!info->tx_enabled) 2579 tx_start(info); 2580 } else { 2581 if (info->tx_enabled) 2582 tx_stop(info); 2583 } 2584 spin_unlock_irqrestore(&info->lock,flags); 2585 return 0; 2586 } 2587 2588 /* 2589 * abort transmit HDLC frame 2590 */ 2591 static int tx_abort(struct slgt_info *info) 2592 { 2593 unsigned long flags; 2594 DBGINFO(("%s tx_abort\n", info->device_name)); 2595 spin_lock_irqsave(&info->lock,flags); 2596 tdma_reset(info); 2597 spin_unlock_irqrestore(&info->lock,flags); 2598 return 0; 2599 } 2600 2601 static int rx_enable(struct slgt_info *info, int enable) 2602 { 2603 unsigned long flags; 2604 unsigned int rbuf_fill_level; 2605 DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); 2606 spin_lock_irqsave(&info->lock,flags); 2607 /* 2608 * enable[31..16] = receive DMA buffer fill level 2609 * 0 = noop (leave fill level unchanged) 2610 * fill level must be multiple of 4 and <= buffer size 2611 */ 2612 rbuf_fill_level = ((unsigned int)enable) >> 16; 2613 if (rbuf_fill_level) { 2614 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { 2615 spin_unlock_irqrestore(&info->lock, flags); 2616 return -EINVAL; 2617 } 2618 info->rbuf_fill_level = rbuf_fill_level; 2619 if (rbuf_fill_level < 128) 2620 info->rx_pio = 1; /* PIO mode */ 2621 else 2622 info->rx_pio = 0; /* DMA mode */ 2623 rx_stop(info); /* restart receiver to use new fill level */ 2624 } 2625 2626 /* 2627 * enable[1..0] = receiver enable command 2628 * 0 = disable 2629 * 1 = enable 2630 * 2 = enable or force hunt mode if already enabled 2631 */ 2632 enable &= 3; 2633 if (enable) { 2634 if (!info->rx_enabled) 2635 rx_start(info); 2636 else if (enable == 2) { 2637 /* force hunt mode (write 1 to RCR[3]) */ 2638 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3); 2639 } 2640 } else { 2641 if (info->rx_enabled) 2642 rx_stop(info); 2643 } 2644 spin_unlock_irqrestore(&info->lock,flags); 2645 return 0; 2646 } 2647 2648 /* 2649 * wait for specified event to occur 2650 */ 2651 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) 2652 { 2653 unsigned long flags; 2654 int s; 2655 int rc=0; 2656 struct mgsl_icount cprev, cnow; 2657 int events; 2658 int mask; 2659 struct _input_signal_events oldsigs, newsigs; 2660 DECLARE_WAITQUEUE(wait, current); 2661 2662 if (get_user(mask, mask_ptr)) 2663 return -EFAULT; 2664 2665 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); 2666 2667 spin_lock_irqsave(&info->lock,flags); 2668 2669 /* return immediately if state matches requested events */ 2670 get_gtsignals(info); 2671 s = info->signals; 2672 2673 events = mask & 2674 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + 2675 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + 2676 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + 2677 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); 2678 if (events) { 2679 spin_unlock_irqrestore(&info->lock,flags); 2680 goto exit; 2681 } 2682 2683 /* save current irq counts */ 2684 cprev = info->icount; 2685 oldsigs = info->input_signal_events; 2686 2687 /* enable hunt and idle irqs if needed */ 2688 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { 2689 unsigned short val = rd_reg16(info, SCR); 2690 if (!(val & IRQ_RXIDLE)) 2691 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); 2692 } 2693 2694 set_current_state(TASK_INTERRUPTIBLE); 2695 add_wait_queue(&info->event_wait_q, &wait); 2696 2697 spin_unlock_irqrestore(&info->lock,flags); 2698 2699 for(;;) { 2700 schedule(); 2701 if (signal_pending(current)) { 2702 rc = -ERESTARTSYS; 2703 break; 2704 } 2705 2706 /* get current irq counts */ 2707 spin_lock_irqsave(&info->lock,flags); 2708 cnow = info->icount; 2709 newsigs = info->input_signal_events; 2710 set_current_state(TASK_INTERRUPTIBLE); 2711 spin_unlock_irqrestore(&info->lock,flags); 2712 2713 /* if no change, wait aborted for some reason */ 2714 if (newsigs.dsr_up == oldsigs.dsr_up && 2715 newsigs.dsr_down == oldsigs.dsr_down && 2716 newsigs.dcd_up == oldsigs.dcd_up && 2717 newsigs.dcd_down == oldsigs.dcd_down && 2718 newsigs.cts_up == oldsigs.cts_up && 2719 newsigs.cts_down == oldsigs.cts_down && 2720 newsigs.ri_up == oldsigs.ri_up && 2721 newsigs.ri_down == oldsigs.ri_down && 2722 cnow.exithunt == cprev.exithunt && 2723 cnow.rxidle == cprev.rxidle) { 2724 rc = -EIO; 2725 break; 2726 } 2727 2728 events = mask & 2729 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + 2730 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + 2731 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + 2732 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + 2733 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + 2734 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + 2735 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + 2736 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + 2737 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + 2738 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); 2739 if (events) 2740 break; 2741 2742 cprev = cnow; 2743 oldsigs = newsigs; 2744 } 2745 2746 remove_wait_queue(&info->event_wait_q, &wait); 2747 set_current_state(TASK_RUNNING); 2748 2749 2750 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { 2751 spin_lock_irqsave(&info->lock,flags); 2752 if (!waitqueue_active(&info->event_wait_q)) { 2753 /* disable enable exit hunt mode/idle rcvd IRQs */ 2754 wr_reg16(info, SCR, 2755 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); 2756 } 2757 spin_unlock_irqrestore(&info->lock,flags); 2758 } 2759 exit: 2760 if (rc == 0) 2761 rc = put_user(events, mask_ptr); 2762 return rc; 2763 } 2764 2765 static int get_interface(struct slgt_info *info, int __user *if_mode) 2766 { 2767 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); 2768 if (put_user(info->if_mode, if_mode)) 2769 return -EFAULT; 2770 return 0; 2771 } 2772 2773 static int set_interface(struct slgt_info *info, int if_mode) 2774 { 2775 unsigned long flags; 2776 unsigned short val; 2777 2778 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); 2779 spin_lock_irqsave(&info->lock,flags); 2780 info->if_mode = if_mode; 2781 2782 msc_set_vcr(info); 2783 2784 /* TCR (tx control) 07 1=RTS driver control */ 2785 val = rd_reg16(info, TCR); 2786 if (info->if_mode & MGSL_INTERFACE_RTS_EN) 2787 val |= BIT7; 2788 else 2789 val &= ~BIT7; 2790 wr_reg16(info, TCR, val); 2791 2792 spin_unlock_irqrestore(&info->lock,flags); 2793 return 0; 2794 } 2795 2796 static int get_xsync(struct slgt_info *info, int __user *xsync) 2797 { 2798 DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync)); 2799 if (put_user(info->xsync, xsync)) 2800 return -EFAULT; 2801 return 0; 2802 } 2803 2804 /* 2805 * set extended sync pattern (1 to 4 bytes) for extended sync mode 2806 * 2807 * sync pattern is contained in least significant bytes of value 2808 * most significant byte of sync pattern is oldest (1st sent/detected) 2809 */ 2810 static int set_xsync(struct slgt_info *info, int xsync) 2811 { 2812 unsigned long flags; 2813 2814 DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync)); 2815 spin_lock_irqsave(&info->lock, flags); 2816 info->xsync = xsync; 2817 wr_reg32(info, XSR, xsync); 2818 spin_unlock_irqrestore(&info->lock, flags); 2819 return 0; 2820 } 2821 2822 static int get_xctrl(struct slgt_info *info, int __user *xctrl) 2823 { 2824 DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl)); 2825 if (put_user(info->xctrl, xctrl)) 2826 return -EFAULT; 2827 return 0; 2828 } 2829 2830 /* 2831 * set extended control options 2832 * 2833 * xctrl[31:19] reserved, must be zero 2834 * xctrl[18:17] extended sync pattern length in bytes 2835 * 00 = 1 byte in xsr[7:0] 2836 * 01 = 2 bytes in xsr[15:0] 2837 * 10 = 3 bytes in xsr[23:0] 2838 * 11 = 4 bytes in xsr[31:0] 2839 * xctrl[16] 1 = enable terminal count, 0=disabled 2840 * xctrl[15:0] receive terminal count for fixed length packets 2841 * value is count minus one (0 = 1 byte packet) 2842 * when terminal count is reached, receiver 2843 * automatically returns to hunt mode and receive 2844 * FIFO contents are flushed to DMA buffers with 2845 * end of frame (EOF) status 2846 */ 2847 static int set_xctrl(struct slgt_info *info, int xctrl) 2848 { 2849 unsigned long flags; 2850 2851 DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl)); 2852 spin_lock_irqsave(&info->lock, flags); 2853 info->xctrl = xctrl; 2854 wr_reg32(info, XCR, xctrl); 2855 spin_unlock_irqrestore(&info->lock, flags); 2856 return 0; 2857 } 2858 2859 /* 2860 * set general purpose IO pin state and direction 2861 * 2862 * user_gpio fields: 2863 * state each bit indicates a pin state 2864 * smask set bit indicates pin state to set 2865 * dir each bit indicates a pin direction (0=input, 1=output) 2866 * dmask set bit indicates pin direction to set 2867 */ 2868 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) 2869 { 2870 unsigned long flags; 2871 struct gpio_desc gpio; 2872 __u32 data; 2873 2874 if (!info->gpio_present) 2875 return -EINVAL; 2876 if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) 2877 return -EFAULT; 2878 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n", 2879 info->device_name, gpio.state, gpio.smask, 2880 gpio.dir, gpio.dmask)); 2881 2882 spin_lock_irqsave(&info->port_array[0]->lock, flags); 2883 if (gpio.dmask) { 2884 data = rd_reg32(info, IODR); 2885 data |= gpio.dmask & gpio.dir; 2886 data &= ~(gpio.dmask & ~gpio.dir); 2887 wr_reg32(info, IODR, data); 2888 } 2889 if (gpio.smask) { 2890 data = rd_reg32(info, IOVR); 2891 data |= gpio.smask & gpio.state; 2892 data &= ~(gpio.smask & ~gpio.state); 2893 wr_reg32(info, IOVR, data); 2894 } 2895 spin_unlock_irqrestore(&info->port_array[0]->lock, flags); 2896 2897 return 0; 2898 } 2899 2900 /* 2901 * get general purpose IO pin state and direction 2902 */ 2903 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) 2904 { 2905 struct gpio_desc gpio; 2906 if (!info->gpio_present) 2907 return -EINVAL; 2908 gpio.state = rd_reg32(info, IOVR); 2909 gpio.smask = 0xffffffff; 2910 gpio.dir = rd_reg32(info, IODR); 2911 gpio.dmask = 0xffffffff; 2912 if (copy_to_user(user_gpio, &gpio, sizeof(gpio))) 2913 return -EFAULT; 2914 DBGINFO(("%s get_gpio state=%08x dir=%08x\n", 2915 info->device_name, gpio.state, gpio.dir)); 2916 return 0; 2917 } 2918 2919 /* 2920 * conditional wait facility 2921 */ 2922 static void init_cond_wait(struct cond_wait *w, unsigned int data) 2923 { 2924 init_waitqueue_head(&w->q); 2925 init_waitqueue_entry(&w->wait, current); 2926 w->data = data; 2927 } 2928 2929 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w) 2930 { 2931 set_current_state(TASK_INTERRUPTIBLE); 2932 add_wait_queue(&w->q, &w->wait); 2933 w->next = *head; 2934 *head = w; 2935 } 2936 2937 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw) 2938 { 2939 struct cond_wait *w, *prev; 2940 remove_wait_queue(&cw->q, &cw->wait); 2941 set_current_state(TASK_RUNNING); 2942 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) { 2943 if (w == cw) { 2944 if (prev != NULL) 2945 prev->next = w->next; 2946 else 2947 *head = w->next; 2948 break; 2949 } 2950 } 2951 } 2952 2953 static void flush_cond_wait(struct cond_wait **head) 2954 { 2955 while (*head != NULL) { 2956 wake_up_interruptible(&(*head)->q); 2957 *head = (*head)->next; 2958 } 2959 } 2960 2961 /* 2962 * wait for general purpose I/O pin(s) to enter specified state 2963 * 2964 * user_gpio fields: 2965 * state - bit indicates target pin state 2966 * smask - set bit indicates watched pin 2967 * 2968 * The wait ends when at least one watched pin enters the specified 2969 * state. When 0 (no error) is returned, user_gpio->state is set to the 2970 * state of all GPIO pins when the wait ends. 2971 * 2972 * Note: Each pin may be a dedicated input, dedicated output, or 2973 * configurable input/output. The number and configuration of pins 2974 * varies with the specific adapter model. Only input pins (dedicated 2975 * or configured) can be monitored with this function. 2976 */ 2977 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) 2978 { 2979 unsigned long flags; 2980 int rc = 0; 2981 struct gpio_desc gpio; 2982 struct cond_wait wait; 2983 u32 state; 2984 2985 if (!info->gpio_present) 2986 return -EINVAL; 2987 if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) 2988 return -EFAULT; 2989 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n", 2990 info->device_name, gpio.state, gpio.smask)); 2991 /* ignore output pins identified by set IODR bit */ 2992 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0) 2993 return -EINVAL; 2994 init_cond_wait(&wait, gpio.smask); 2995 2996 spin_lock_irqsave(&info->port_array[0]->lock, flags); 2997 /* enable interrupts for watched pins */ 2998 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask); 2999 /* get current pin states */ 3000 state = rd_reg32(info, IOVR); 3001 3002 if (gpio.smask & ~(state ^ gpio.state)) { 3003 /* already in target state */ 3004 gpio.state = state; 3005 } else { 3006 /* wait for target state */ 3007 add_cond_wait(&info->gpio_wait_q, &wait); 3008 spin_unlock_irqrestore(&info->port_array[0]->lock, flags); 3009 schedule(); 3010 if (signal_pending(current)) 3011 rc = -ERESTARTSYS; 3012 else 3013 gpio.state = wait.data; 3014 spin_lock_irqsave(&info->port_array[0]->lock, flags); 3015 remove_cond_wait(&info->gpio_wait_q, &wait); 3016 } 3017 3018 /* disable all GPIO interrupts if no waiting processes */ 3019 if (info->gpio_wait_q == NULL) 3020 wr_reg32(info, IOER, 0); 3021 spin_unlock_irqrestore(&info->port_array[0]->lock, flags); 3022 3023 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio))) 3024 rc = -EFAULT; 3025 return rc; 3026 } 3027 3028 static int modem_input_wait(struct slgt_info *info,int arg) 3029 { 3030 unsigned long flags; 3031 int rc; 3032 struct mgsl_icount cprev, cnow; 3033 DECLARE_WAITQUEUE(wait, current); 3034 3035 /* save current irq counts */ 3036 spin_lock_irqsave(&info->lock,flags); 3037 cprev = info->icount; 3038 add_wait_queue(&info->status_event_wait_q, &wait); 3039 set_current_state(TASK_INTERRUPTIBLE); 3040 spin_unlock_irqrestore(&info->lock,flags); 3041 3042 for(;;) { 3043 schedule(); 3044 if (signal_pending(current)) { 3045 rc = -ERESTARTSYS; 3046 break; 3047 } 3048 3049 /* get new irq counts */ 3050 spin_lock_irqsave(&info->lock,flags); 3051 cnow = info->icount; 3052 set_current_state(TASK_INTERRUPTIBLE); 3053 spin_unlock_irqrestore(&info->lock,flags); 3054 3055 /* if no change, wait aborted for some reason */ 3056 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 3057 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { 3058 rc = -EIO; 3059 break; 3060 } 3061 3062 /* check for change in caller specified modem input */ 3063 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || 3064 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || 3065 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || 3066 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { 3067 rc = 0; 3068 break; 3069 } 3070 3071 cprev = cnow; 3072 } 3073 remove_wait_queue(&info->status_event_wait_q, &wait); 3074 set_current_state(TASK_RUNNING); 3075 return rc; 3076 } 3077 3078 /* 3079 * return state of serial control and status signals 3080 */ 3081 static int tiocmget(struct tty_struct *tty) 3082 { 3083 struct slgt_info *info = tty->driver_data; 3084 unsigned int result; 3085 unsigned long flags; 3086 3087 spin_lock_irqsave(&info->lock,flags); 3088 get_gtsignals(info); 3089 spin_unlock_irqrestore(&info->lock,flags); 3090 3091 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + 3092 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + 3093 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + 3094 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + 3095 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + 3096 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); 3097 3098 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); 3099 return result; 3100 } 3101 3102 /* 3103 * set modem control signals (DTR/RTS) 3104 * 3105 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit 3106 * TIOCMSET = set/clear signal values 3107 * value bit mask for command 3108 */ 3109 static int tiocmset(struct tty_struct *tty, 3110 unsigned int set, unsigned int clear) 3111 { 3112 struct slgt_info *info = tty->driver_data; 3113 unsigned long flags; 3114 3115 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); 3116 3117 if (set & TIOCM_RTS) 3118 info->signals |= SerialSignal_RTS; 3119 if (set & TIOCM_DTR) 3120 info->signals |= SerialSignal_DTR; 3121 if (clear & TIOCM_RTS) 3122 info->signals &= ~SerialSignal_RTS; 3123 if (clear & TIOCM_DTR) 3124 info->signals &= ~SerialSignal_DTR; 3125 3126 spin_lock_irqsave(&info->lock,flags); 3127 set_gtsignals(info); 3128 spin_unlock_irqrestore(&info->lock,flags); 3129 return 0; 3130 } 3131 3132 static int carrier_raised(struct tty_port *port) 3133 { 3134 unsigned long flags; 3135 struct slgt_info *info = container_of(port, struct slgt_info, port); 3136 3137 spin_lock_irqsave(&info->lock,flags); 3138 get_gtsignals(info); 3139 spin_unlock_irqrestore(&info->lock,flags); 3140 return (info->signals & SerialSignal_DCD) ? 1 : 0; 3141 } 3142 3143 static void dtr_rts(struct tty_port *port, int on) 3144 { 3145 unsigned long flags; 3146 struct slgt_info *info = container_of(port, struct slgt_info, port); 3147 3148 spin_lock_irqsave(&info->lock,flags); 3149 if (on) 3150 info->signals |= SerialSignal_RTS | SerialSignal_DTR; 3151 else 3152 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); 3153 set_gtsignals(info); 3154 spin_unlock_irqrestore(&info->lock,flags); 3155 } 3156 3157 3158 /* 3159 * block current process until the device is ready to open 3160 */ 3161 static int block_til_ready(struct tty_struct *tty, struct file *filp, 3162 struct slgt_info *info) 3163 { 3164 DECLARE_WAITQUEUE(wait, current); 3165 int retval; 3166 bool do_clocal = false; 3167 unsigned long flags; 3168 int cd; 3169 struct tty_port *port = &info->port; 3170 3171 DBGINFO(("%s block_til_ready\n", tty->driver->name)); 3172 3173 if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { 3174 /* nonblock mode is set or port is not enabled */ 3175 tty_port_set_active(port, 1); 3176 return 0; 3177 } 3178 3179 if (C_CLOCAL(tty)) 3180 do_clocal = true; 3181 3182 /* Wait for carrier detect and the line to become 3183 * free (i.e., not in use by the callout). While we are in 3184 * this loop, port->count is dropped by one, so that 3185 * close() knows when to free things. We restore it upon 3186 * exit, either normal or abnormal. 3187 */ 3188 3189 retval = 0; 3190 add_wait_queue(&port->open_wait, &wait); 3191 3192 spin_lock_irqsave(&info->lock, flags); 3193 port->count--; 3194 spin_unlock_irqrestore(&info->lock, flags); 3195 port->blocked_open++; 3196 3197 while (1) { 3198 if (C_BAUD(tty) && tty_port_initialized(port)) 3199 tty_port_raise_dtr_rts(port); 3200 3201 set_current_state(TASK_INTERRUPTIBLE); 3202 3203 if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { 3204 retval = (port->flags & ASYNC_HUP_NOTIFY) ? 3205 -EAGAIN : -ERESTARTSYS; 3206 break; 3207 } 3208 3209 cd = tty_port_carrier_raised(port); 3210 if (do_clocal || cd) 3211 break; 3212 3213 if (signal_pending(current)) { 3214 retval = -ERESTARTSYS; 3215 break; 3216 } 3217 3218 DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); 3219 tty_unlock(tty); 3220 schedule(); 3221 tty_lock(tty); 3222 } 3223 3224 set_current_state(TASK_RUNNING); 3225 remove_wait_queue(&port->open_wait, &wait); 3226 3227 if (!tty_hung_up_p(filp)) 3228 port->count++; 3229 port->blocked_open--; 3230 3231 if (!retval) 3232 tty_port_set_active(port, 1); 3233 3234 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); 3235 return retval; 3236 } 3237 3238 /* 3239 * allocate buffers used for calling line discipline receive_buf 3240 * directly in synchronous mode 3241 * note: add 5 bytes to max frame size to allow appending 3242 * 32-bit CRC and status byte when configured to do so 3243 */ 3244 static int alloc_tmp_rbuf(struct slgt_info *info) 3245 { 3246 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); 3247 if (info->tmp_rbuf == NULL) 3248 return -ENOMEM; 3249 /* unused flag buffer to satisfy receive_buf calling interface */ 3250 info->flag_buf = kzalloc(info->max_frame_size + 5, GFP_KERNEL); 3251 if (!info->flag_buf) { 3252 kfree(info->tmp_rbuf); 3253 info->tmp_rbuf = NULL; 3254 return -ENOMEM; 3255 } 3256 return 0; 3257 } 3258 3259 static void free_tmp_rbuf(struct slgt_info *info) 3260 { 3261 kfree(info->tmp_rbuf); 3262 info->tmp_rbuf = NULL; 3263 kfree(info->flag_buf); 3264 info->flag_buf = NULL; 3265 } 3266 3267 /* 3268 * allocate DMA descriptor lists. 3269 */ 3270 static int alloc_desc(struct slgt_info *info) 3271 { 3272 unsigned int i; 3273 unsigned int pbufs; 3274 3275 /* allocate memory to hold descriptor lists */ 3276 info->bufs = dma_alloc_coherent(&info->pdev->dev, DESC_LIST_SIZE, 3277 &info->bufs_dma_addr, GFP_KERNEL); 3278 if (info->bufs == NULL) 3279 return -ENOMEM; 3280 3281 info->rbufs = (struct slgt_desc*)info->bufs; 3282 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; 3283 3284 pbufs = (unsigned int)info->bufs_dma_addr; 3285 3286 /* 3287 * Build circular lists of descriptors 3288 */ 3289 3290 for (i=0; i < info->rbuf_count; i++) { 3291 /* physical address of this descriptor */ 3292 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); 3293 3294 /* physical address of next descriptor */ 3295 if (i == info->rbuf_count - 1) 3296 info->rbufs[i].next = cpu_to_le32(pbufs); 3297 else 3298 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); 3299 set_desc_count(info->rbufs[i], DMABUFSIZE); 3300 } 3301 3302 for (i=0; i < info->tbuf_count; i++) { 3303 /* physical address of this descriptor */ 3304 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); 3305 3306 /* physical address of next descriptor */ 3307 if (i == info->tbuf_count - 1) 3308 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); 3309 else 3310 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); 3311 } 3312 3313 return 0; 3314 } 3315 3316 static void free_desc(struct slgt_info *info) 3317 { 3318 if (info->bufs != NULL) { 3319 dma_free_coherent(&info->pdev->dev, DESC_LIST_SIZE, 3320 info->bufs, info->bufs_dma_addr); 3321 info->bufs = NULL; 3322 info->rbufs = NULL; 3323 info->tbufs = NULL; 3324 } 3325 } 3326 3327 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) 3328 { 3329 int i; 3330 for (i=0; i < count; i++) { 3331 bufs[i].buf = dma_alloc_coherent(&info->pdev->dev, DMABUFSIZE, 3332 &bufs[i].buf_dma_addr, GFP_KERNEL); 3333 if (!bufs[i].buf) 3334 return -ENOMEM; 3335 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); 3336 } 3337 return 0; 3338 } 3339 3340 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) 3341 { 3342 int i; 3343 for (i=0; i < count; i++) { 3344 if (bufs[i].buf == NULL) 3345 continue; 3346 dma_free_coherent(&info->pdev->dev, DMABUFSIZE, bufs[i].buf, 3347 bufs[i].buf_dma_addr); 3348 bufs[i].buf = NULL; 3349 } 3350 } 3351 3352 static int alloc_dma_bufs(struct slgt_info *info) 3353 { 3354 info->rbuf_count = 32; 3355 info->tbuf_count = 32; 3356 3357 if (alloc_desc(info) < 0 || 3358 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || 3359 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || 3360 alloc_tmp_rbuf(info) < 0) { 3361 DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); 3362 return -ENOMEM; 3363 } 3364 reset_rbufs(info); 3365 return 0; 3366 } 3367 3368 static void free_dma_bufs(struct slgt_info *info) 3369 { 3370 if (info->bufs) { 3371 free_bufs(info, info->rbufs, info->rbuf_count); 3372 free_bufs(info, info->tbufs, info->tbuf_count); 3373 free_desc(info); 3374 } 3375 free_tmp_rbuf(info); 3376 } 3377 3378 static int claim_resources(struct slgt_info *info) 3379 { 3380 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { 3381 DBGERR(("%s reg addr conflict, addr=%08X\n", 3382 info->device_name, info->phys_reg_addr)); 3383 info->init_error = DiagStatus_AddressConflict; 3384 goto errout; 3385 } 3386 else 3387 info->reg_addr_requested = true; 3388 3389 info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE); 3390 if (!info->reg_addr) { 3391 DBGERR(("%s can't map device registers, addr=%08X\n", 3392 info->device_name, info->phys_reg_addr)); 3393 info->init_error = DiagStatus_CantAssignPciResources; 3394 goto errout; 3395 } 3396 return 0; 3397 3398 errout: 3399 release_resources(info); 3400 return -ENODEV; 3401 } 3402 3403 static void release_resources(struct slgt_info *info) 3404 { 3405 if (info->irq_requested) { 3406 free_irq(info->irq_level, info); 3407 info->irq_requested = false; 3408 } 3409 3410 if (info->reg_addr_requested) { 3411 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); 3412 info->reg_addr_requested = false; 3413 } 3414 3415 if (info->reg_addr) { 3416 iounmap(info->reg_addr); 3417 info->reg_addr = NULL; 3418 } 3419 } 3420 3421 /* Add the specified device instance data structure to the 3422 * global linked list of devices and increment the device count. 3423 */ 3424 static void add_device(struct slgt_info *info) 3425 { 3426 char *devstr; 3427 3428 info->next_device = NULL; 3429 info->line = slgt_device_count; 3430 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); 3431 3432 if (info->line < MAX_DEVICES) { 3433 if (maxframe[info->line]) 3434 info->max_frame_size = maxframe[info->line]; 3435 } 3436 3437 slgt_device_count++; 3438 3439 if (!slgt_device_list) 3440 slgt_device_list = info; 3441 else { 3442 struct slgt_info *current_dev = slgt_device_list; 3443 while(current_dev->next_device) 3444 current_dev = current_dev->next_device; 3445 current_dev->next_device = info; 3446 } 3447 3448 if (info->max_frame_size < 4096) 3449 info->max_frame_size = 4096; 3450 else if (info->max_frame_size > 65535) 3451 info->max_frame_size = 65535; 3452 3453 switch(info->pdev->device) { 3454 case SYNCLINK_GT_DEVICE_ID: 3455 devstr = "GT"; 3456 break; 3457 case SYNCLINK_GT2_DEVICE_ID: 3458 devstr = "GT2"; 3459 break; 3460 case SYNCLINK_GT4_DEVICE_ID: 3461 devstr = "GT4"; 3462 break; 3463 case SYNCLINK_AC_DEVICE_ID: 3464 devstr = "AC"; 3465 info->params.mode = MGSL_MODE_ASYNC; 3466 break; 3467 default: 3468 devstr = "(unknown model)"; 3469 } 3470 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", 3471 devstr, info->device_name, info->phys_reg_addr, 3472 info->irq_level, info->max_frame_size); 3473 3474 #if SYNCLINK_GENERIC_HDLC 3475 hdlcdev_init(info); 3476 #endif 3477 } 3478 3479 static const struct tty_port_operations slgt_port_ops = { 3480 .carrier_raised = carrier_raised, 3481 .dtr_rts = dtr_rts, 3482 }; 3483 3484 /* 3485 * allocate device instance structure, return NULL on failure 3486 */ 3487 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) 3488 { 3489 struct slgt_info *info; 3490 3491 info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL); 3492 3493 if (!info) { 3494 DBGERR(("%s device alloc failed adapter=%d port=%d\n", 3495 driver_name, adapter_num, port_num)); 3496 } else { 3497 tty_port_init(&info->port); 3498 info->port.ops = &slgt_port_ops; 3499 info->magic = MGSL_MAGIC; 3500 INIT_WORK(&info->task, bh_handler); 3501 info->max_frame_size = 4096; 3502 info->base_clock = 14745600; 3503 info->rbuf_fill_level = DMABUFSIZE; 3504 init_waitqueue_head(&info->status_event_wait_q); 3505 init_waitqueue_head(&info->event_wait_q); 3506 spin_lock_init(&info->netlock); 3507 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); 3508 info->idle_mode = HDLC_TXIDLE_FLAGS; 3509 info->adapter_num = adapter_num; 3510 info->port_num = port_num; 3511 3512 timer_setup(&info->tx_timer, tx_timeout, 0); 3513 timer_setup(&info->rx_timer, rx_timeout, 0); 3514 3515 /* Copy configuration info to device instance data */ 3516 info->pdev = pdev; 3517 info->irq_level = pdev->irq; 3518 info->phys_reg_addr = pci_resource_start(pdev,0); 3519 3520 info->bus_type = MGSL_BUS_TYPE_PCI; 3521 info->irq_flags = IRQF_SHARED; 3522 3523 info->init_error = -1; /* assume error, set to 0 on successful init */ 3524 } 3525 3526 return info; 3527 } 3528 3529 static void device_init(int adapter_num, struct pci_dev *pdev) 3530 { 3531 struct slgt_info *port_array[SLGT_MAX_PORTS]; 3532 int i; 3533 int port_count = 1; 3534 3535 if (pdev->device == SYNCLINK_GT2_DEVICE_ID) 3536 port_count = 2; 3537 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID) 3538 port_count = 4; 3539 3540 /* allocate device instances for all ports */ 3541 for (i=0; i < port_count; ++i) { 3542 port_array[i] = alloc_dev(adapter_num, i, pdev); 3543 if (port_array[i] == NULL) { 3544 for (--i; i >= 0; --i) { 3545 tty_port_destroy(&port_array[i]->port); 3546 kfree(port_array[i]); 3547 } 3548 return; 3549 } 3550 } 3551 3552 /* give copy of port_array to all ports and add to device list */ 3553 for (i=0; i < port_count; ++i) { 3554 memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); 3555 add_device(port_array[i]); 3556 port_array[i]->port_count = port_count; 3557 spin_lock_init(&port_array[i]->lock); 3558 } 3559 3560 /* Allocate and claim adapter resources */ 3561 if (!claim_resources(port_array[0])) { 3562 3563 alloc_dma_bufs(port_array[0]); 3564 3565 /* copy resource information from first port to others */ 3566 for (i = 1; i < port_count; ++i) { 3567 port_array[i]->irq_level = port_array[0]->irq_level; 3568 port_array[i]->reg_addr = port_array[0]->reg_addr; 3569 alloc_dma_bufs(port_array[i]); 3570 } 3571 3572 if (request_irq(port_array[0]->irq_level, 3573 slgt_interrupt, 3574 port_array[0]->irq_flags, 3575 port_array[0]->device_name, 3576 port_array[0]) < 0) { 3577 DBGERR(("%s request_irq failed IRQ=%d\n", 3578 port_array[0]->device_name, 3579 port_array[0]->irq_level)); 3580 } else { 3581 port_array[0]->irq_requested = true; 3582 adapter_test(port_array[0]); 3583 for (i=1 ; i < port_count ; i++) { 3584 port_array[i]->init_error = port_array[0]->init_error; 3585 port_array[i]->gpio_present = port_array[0]->gpio_present; 3586 } 3587 } 3588 } 3589 3590 for (i = 0; i < port_count; ++i) { 3591 struct slgt_info *info = port_array[i]; 3592 tty_port_register_device(&info->port, serial_driver, info->line, 3593 &info->pdev->dev); 3594 } 3595 } 3596 3597 static int init_one(struct pci_dev *dev, 3598 const struct pci_device_id *ent) 3599 { 3600 if (pci_enable_device(dev)) { 3601 printk("error enabling pci device %p\n", dev); 3602 return -EIO; 3603 } 3604 pci_set_master(dev); 3605 device_init(slgt_device_count, dev); 3606 return 0; 3607 } 3608 3609 static void remove_one(struct pci_dev *dev) 3610 { 3611 } 3612 3613 static const struct tty_operations ops = { 3614 .open = open, 3615 .close = close, 3616 .write = write, 3617 .put_char = put_char, 3618 .flush_chars = flush_chars, 3619 .write_room = write_room, 3620 .chars_in_buffer = chars_in_buffer, 3621 .flush_buffer = flush_buffer, 3622 .ioctl = ioctl, 3623 .compat_ioctl = slgt_compat_ioctl, 3624 .throttle = throttle, 3625 .unthrottle = unthrottle, 3626 .send_xchar = send_xchar, 3627 .break_ctl = set_break, 3628 .wait_until_sent = wait_until_sent, 3629 .set_termios = set_termios, 3630 .stop = tx_hold, 3631 .start = tx_release, 3632 .hangup = hangup, 3633 .tiocmget = tiocmget, 3634 .tiocmset = tiocmset, 3635 .get_icount = get_icount, 3636 .proc_show = synclink_gt_proc_show, 3637 }; 3638 3639 static void slgt_cleanup(void) 3640 { 3641 struct slgt_info *info; 3642 struct slgt_info *tmp; 3643 3644 printk(KERN_INFO "unload %s\n", driver_name); 3645 3646 if (serial_driver) { 3647 for (info=slgt_device_list ; info != NULL ; info=info->next_device) 3648 tty_unregister_device(serial_driver, info->line); 3649 tty_unregister_driver(serial_driver); 3650 tty_driver_kref_put(serial_driver); 3651 } 3652 3653 /* reset devices */ 3654 info = slgt_device_list; 3655 while(info) { 3656 reset_port(info); 3657 info = info->next_device; 3658 } 3659 3660 /* release devices */ 3661 info = slgt_device_list; 3662 while(info) { 3663 #if SYNCLINK_GENERIC_HDLC 3664 hdlcdev_exit(info); 3665 #endif 3666 free_dma_bufs(info); 3667 free_tmp_rbuf(info); 3668 if (info->port_num == 0) 3669 release_resources(info); 3670 tmp = info; 3671 info = info->next_device; 3672 tty_port_destroy(&tmp->port); 3673 kfree(tmp); 3674 } 3675 3676 if (pci_registered) 3677 pci_unregister_driver(&pci_driver); 3678 } 3679 3680 /* 3681 * Driver initialization entry point. 3682 */ 3683 static int __init slgt_init(void) 3684 { 3685 int rc; 3686 3687 printk(KERN_INFO "%s\n", driver_name); 3688 3689 serial_driver = tty_alloc_driver(MAX_DEVICES, TTY_DRIVER_REAL_RAW | 3690 TTY_DRIVER_DYNAMIC_DEV); 3691 if (IS_ERR(serial_driver)) { 3692 printk("%s can't allocate tty driver\n", driver_name); 3693 return PTR_ERR(serial_driver); 3694 } 3695 3696 /* Initialize the tty_driver structure */ 3697 3698 serial_driver->driver_name = slgt_driver_name; 3699 serial_driver->name = tty_dev_prefix; 3700 serial_driver->major = ttymajor; 3701 serial_driver->minor_start = 64; 3702 serial_driver->type = TTY_DRIVER_TYPE_SERIAL; 3703 serial_driver->subtype = SERIAL_TYPE_NORMAL; 3704 serial_driver->init_termios = tty_std_termios; 3705 serial_driver->init_termios.c_cflag = 3706 B9600 | CS8 | CREAD | HUPCL | CLOCAL; 3707 serial_driver->init_termios.c_ispeed = 9600; 3708 serial_driver->init_termios.c_ospeed = 9600; 3709 tty_set_operations(serial_driver, &ops); 3710 if ((rc = tty_register_driver(serial_driver)) < 0) { 3711 DBGERR(("%s can't register serial driver\n", driver_name)); 3712 tty_driver_kref_put(serial_driver); 3713 serial_driver = NULL; 3714 goto error; 3715 } 3716 3717 printk(KERN_INFO "%s, tty major#%d\n", 3718 driver_name, serial_driver->major); 3719 3720 slgt_device_count = 0; 3721 if ((rc = pci_register_driver(&pci_driver)) < 0) { 3722 printk("%s pci_register_driver error=%d\n", driver_name, rc); 3723 goto error; 3724 } 3725 pci_registered = true; 3726 3727 if (!slgt_device_list) 3728 printk("%s no devices found\n",driver_name); 3729 3730 return 0; 3731 3732 error: 3733 slgt_cleanup(); 3734 return rc; 3735 } 3736 3737 static void __exit slgt_exit(void) 3738 { 3739 slgt_cleanup(); 3740 } 3741 3742 module_init(slgt_init); 3743 module_exit(slgt_exit); 3744 3745 /* 3746 * register access routines 3747 */ 3748 3749 #define CALC_REGADDR() \ 3750 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ 3751 if (addr >= 0x80) \ 3752 reg_addr += (info->port_num) * 32; \ 3753 else if (addr >= 0x40) \ 3754 reg_addr += (info->port_num) * 16; 3755 3756 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) 3757 { 3758 CALC_REGADDR(); 3759 return readb((void __iomem *)reg_addr); 3760 } 3761 3762 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) 3763 { 3764 CALC_REGADDR(); 3765 writeb(value, (void __iomem *)reg_addr); 3766 } 3767 3768 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) 3769 { 3770 CALC_REGADDR(); 3771 return readw((void __iomem *)reg_addr); 3772 } 3773 3774 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) 3775 { 3776 CALC_REGADDR(); 3777 writew(value, (void __iomem *)reg_addr); 3778 } 3779 3780 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) 3781 { 3782 CALC_REGADDR(); 3783 return readl((void __iomem *)reg_addr); 3784 } 3785 3786 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) 3787 { 3788 CALC_REGADDR(); 3789 writel(value, (void __iomem *)reg_addr); 3790 } 3791 3792 static void rdma_reset(struct slgt_info *info) 3793 { 3794 unsigned int i; 3795 3796 /* set reset bit */ 3797 wr_reg32(info, RDCSR, BIT1); 3798 3799 /* wait for enable bit cleared */ 3800 for(i=0 ; i < 1000 ; i++) 3801 if (!(rd_reg32(info, RDCSR) & BIT0)) 3802 break; 3803 } 3804 3805 static void tdma_reset(struct slgt_info *info) 3806 { 3807 unsigned int i; 3808 3809 /* set reset bit */ 3810 wr_reg32(info, TDCSR, BIT1); 3811 3812 /* wait for enable bit cleared */ 3813 for(i=0 ; i < 1000 ; i++) 3814 if (!(rd_reg32(info, TDCSR) & BIT0)) 3815 break; 3816 } 3817 3818 /* 3819 * enable internal loopback 3820 * TxCLK and RxCLK are generated from BRG 3821 * and TxD is looped back to RxD internally. 3822 */ 3823 static void enable_loopback(struct slgt_info *info) 3824 { 3825 /* SCR (serial control) BIT2=loopback enable */ 3826 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); 3827 3828 if (info->params.mode != MGSL_MODE_ASYNC) { 3829 /* CCR (clock control) 3830 * 07..05 tx clock source (010 = BRG) 3831 * 04..02 rx clock source (010 = BRG) 3832 * 01 auxclk enable (0 = disable) 3833 * 00 BRG enable (1 = enable) 3834 * 3835 * 0100 1001 3836 */ 3837 wr_reg8(info, CCR, 0x49); 3838 3839 /* set speed if available, otherwise use default */ 3840 if (info->params.clock_speed) 3841 set_rate(info, info->params.clock_speed); 3842 else 3843 set_rate(info, 3686400); 3844 } 3845 } 3846 3847 /* 3848 * set baud rate generator to specified rate 3849 */ 3850 static void set_rate(struct slgt_info *info, u32 rate) 3851 { 3852 unsigned int div; 3853 unsigned int osc = info->base_clock; 3854 3855 /* div = osc/rate - 1 3856 * 3857 * Round div up if osc/rate is not integer to 3858 * force to next slowest rate. 3859 */ 3860 3861 if (rate) { 3862 div = osc/rate; 3863 if (!(osc % rate) && div) 3864 div--; 3865 wr_reg16(info, BDR, (unsigned short)div); 3866 } 3867 } 3868 3869 static void rx_stop(struct slgt_info *info) 3870 { 3871 unsigned short val; 3872 3873 /* disable and reset receiver */ 3874 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ 3875 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ 3876 wr_reg16(info, RCR, val); /* clear reset bit */ 3877 3878 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); 3879 3880 /* clear pending rx interrupts */ 3881 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); 3882 3883 rdma_reset(info); 3884 3885 info->rx_enabled = false; 3886 info->rx_restart = false; 3887 } 3888 3889 static void rx_start(struct slgt_info *info) 3890 { 3891 unsigned short val; 3892 3893 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); 3894 3895 /* clear pending rx overrun IRQ */ 3896 wr_reg16(info, SSR, IRQ_RXOVER); 3897 3898 /* reset and disable receiver */ 3899 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ 3900 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ 3901 wr_reg16(info, RCR, val); /* clear reset bit */ 3902 3903 rdma_reset(info); 3904 reset_rbufs(info); 3905 3906 if (info->rx_pio) { 3907 /* rx request when rx FIFO not empty */ 3908 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); 3909 slgt_irq_on(info, IRQ_RXDATA); 3910 if (info->params.mode == MGSL_MODE_ASYNC) { 3911 /* enable saving of rx status */ 3912 wr_reg32(info, RDCSR, BIT6); 3913 } 3914 } else { 3915 /* rx request when rx FIFO half full */ 3916 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); 3917 /* set 1st descriptor address */ 3918 wr_reg32(info, RDDAR, info->rbufs[0].pdesc); 3919 3920 if (info->params.mode != MGSL_MODE_ASYNC) { 3921 /* enable rx DMA and DMA interrupt */ 3922 wr_reg32(info, RDCSR, (BIT2 + BIT0)); 3923 } else { 3924 /* enable saving of rx status, rx DMA and DMA interrupt */ 3925 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); 3926 } 3927 } 3928 3929 slgt_irq_on(info, IRQ_RXOVER); 3930 3931 /* enable receiver */ 3932 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); 3933 3934 info->rx_restart = false; 3935 info->rx_enabled = true; 3936 } 3937 3938 static void tx_start(struct slgt_info *info) 3939 { 3940 if (!info->tx_enabled) { 3941 wr_reg16(info, TCR, 3942 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2)); 3943 info->tx_enabled = true; 3944 } 3945 3946 if (desc_count(info->tbufs[info->tbuf_start])) { 3947 info->drop_rts_on_tx_done = false; 3948 3949 if (info->params.mode != MGSL_MODE_ASYNC) { 3950 if (info->params.flags & HDLC_FLAG_AUTO_RTS) { 3951 get_gtsignals(info); 3952 if (!(info->signals & SerialSignal_RTS)) { 3953 info->signals |= SerialSignal_RTS; 3954 set_gtsignals(info); 3955 info->drop_rts_on_tx_done = true; 3956 } 3957 } 3958 3959 slgt_irq_off(info, IRQ_TXDATA); 3960 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); 3961 /* clear tx idle and underrun status bits */ 3962 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); 3963 } else { 3964 slgt_irq_off(info, IRQ_TXDATA); 3965 slgt_irq_on(info, IRQ_TXIDLE); 3966 /* clear tx idle status bit */ 3967 wr_reg16(info, SSR, IRQ_TXIDLE); 3968 } 3969 /* set 1st descriptor address and start DMA */ 3970 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); 3971 wr_reg32(info, TDCSR, BIT2 + BIT0); 3972 info->tx_active = true; 3973 } 3974 } 3975 3976 static void tx_stop(struct slgt_info *info) 3977 { 3978 unsigned short val; 3979 3980 del_timer(&info->tx_timer); 3981 3982 tdma_reset(info); 3983 3984 /* reset and disable transmitter */ 3985 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ 3986 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ 3987 3988 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); 3989 3990 /* clear tx idle and underrun status bit */ 3991 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); 3992 3993 reset_tbufs(info); 3994 3995 info->tx_enabled = false; 3996 info->tx_active = false; 3997 } 3998 3999 static void reset_port(struct slgt_info *info) 4000 { 4001 if (!info->reg_addr) 4002 return; 4003 4004 tx_stop(info); 4005 rx_stop(info); 4006 4007 info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); 4008 set_gtsignals(info); 4009 4010 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); 4011 } 4012 4013 static void reset_adapter(struct slgt_info *info) 4014 { 4015 int i; 4016 for (i=0; i < info->port_count; ++i) { 4017 if (info->port_array[i]) 4018 reset_port(info->port_array[i]); 4019 } 4020 } 4021 4022 static void async_mode(struct slgt_info *info) 4023 { 4024 unsigned short val; 4025 4026 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); 4027 tx_stop(info); 4028 rx_stop(info); 4029 4030 /* TCR (tx control) 4031 * 4032 * 15..13 mode, 010=async 4033 * 12..10 encoding, 000=NRZ 4034 * 09 parity enable 4035 * 08 1=odd parity, 0=even parity 4036 * 07 1=RTS driver control 4037 * 06 1=break enable 4038 * 05..04 character length 4039 * 00=5 bits 4040 * 01=6 bits 4041 * 10=7 bits 4042 * 11=8 bits 4043 * 03 0=1 stop bit, 1=2 stop bits 4044 * 02 reset 4045 * 01 enable 4046 * 00 auto-CTS enable 4047 */ 4048 val = 0x4000; 4049 4050 if (info->if_mode & MGSL_INTERFACE_RTS_EN) 4051 val |= BIT7; 4052 4053 if (info->params.parity != ASYNC_PARITY_NONE) { 4054 val |= BIT9; 4055 if (info->params.parity == ASYNC_PARITY_ODD) 4056 val |= BIT8; 4057 } 4058 4059 switch (info->params.data_bits) 4060 { 4061 case 6: val |= BIT4; break; 4062 case 7: val |= BIT5; break; 4063 case 8: val |= BIT5 + BIT4; break; 4064 } 4065 4066 if (info->params.stop_bits != 1) 4067 val |= BIT3; 4068 4069 if (info->params.flags & HDLC_FLAG_AUTO_CTS) 4070 val |= BIT0; 4071 4072 wr_reg16(info, TCR, val); 4073 4074 /* RCR (rx control) 4075 * 4076 * 15..13 mode, 010=async 4077 * 12..10 encoding, 000=NRZ 4078 * 09 parity enable 4079 * 08 1=odd parity, 0=even parity 4080 * 07..06 reserved, must be 0 4081 * 05..04 character length 4082 * 00=5 bits 4083 * 01=6 bits 4084 * 10=7 bits 4085 * 11=8 bits 4086 * 03 reserved, must be zero 4087 * 02 reset 4088 * 01 enable 4089 * 00 auto-DCD enable 4090 */ 4091 val = 0x4000; 4092 4093 if (info->params.parity != ASYNC_PARITY_NONE) { 4094 val |= BIT9; 4095 if (info->params.parity == ASYNC_PARITY_ODD) 4096 val |= BIT8; 4097 } 4098 4099 switch (info->params.data_bits) 4100 { 4101 case 6: val |= BIT4; break; 4102 case 7: val |= BIT5; break; 4103 case 8: val |= BIT5 + BIT4; break; 4104 } 4105 4106 if (info->params.flags & HDLC_FLAG_AUTO_DCD) 4107 val |= BIT0; 4108 4109 wr_reg16(info, RCR, val); 4110 4111 /* CCR (clock control) 4112 * 4113 * 07..05 011 = tx clock source is BRG/16 4114 * 04..02 010 = rx clock source is BRG 4115 * 01 0 = auxclk disabled 4116 * 00 1 = BRG enabled 4117 * 4118 * 0110 1001 4119 */ 4120 wr_reg8(info, CCR, 0x69); 4121 4122 msc_set_vcr(info); 4123 4124 /* SCR (serial control) 4125 * 4126 * 15 1=tx req on FIFO half empty 4127 * 14 1=rx req on FIFO half full 4128 * 13 tx data IRQ enable 4129 * 12 tx idle IRQ enable 4130 * 11 rx break on IRQ enable 4131 * 10 rx data IRQ enable 4132 * 09 rx break off IRQ enable 4133 * 08 overrun IRQ enable 4134 * 07 DSR IRQ enable 4135 * 06 CTS IRQ enable 4136 * 05 DCD IRQ enable 4137 * 04 RI IRQ enable 4138 * 03 0=16x sampling, 1=8x sampling 4139 * 02 1=txd->rxd internal loopback enable 4140 * 01 reserved, must be zero 4141 * 00 1=master IRQ enable 4142 */ 4143 val = BIT15 + BIT14 + BIT0; 4144 /* JCR[8] : 1 = x8 async mode feature available */ 4145 if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate && 4146 ((info->base_clock < (info->params.data_rate * 16)) || 4147 (info->base_clock % (info->params.data_rate * 16)))) { 4148 /* use 8x sampling */ 4149 val |= BIT3; 4150 set_rate(info, info->params.data_rate * 8); 4151 } else { 4152 /* use 16x sampling */ 4153 set_rate(info, info->params.data_rate * 16); 4154 } 4155 wr_reg16(info, SCR, val); 4156 4157 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); 4158 4159 if (info->params.loopback) 4160 enable_loopback(info); 4161 } 4162 4163 static void sync_mode(struct slgt_info *info) 4164 { 4165 unsigned short val; 4166 4167 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); 4168 tx_stop(info); 4169 rx_stop(info); 4170 4171 /* TCR (tx control) 4172 * 4173 * 15..13 mode 4174 * 000=HDLC/SDLC 4175 * 001=raw bit synchronous 4176 * 010=asynchronous/isochronous 4177 * 011=monosync byte synchronous 4178 * 100=bisync byte synchronous 4179 * 101=xsync byte synchronous 4180 * 12..10 encoding 4181 * 09 CRC enable 4182 * 08 CRC32 4183 * 07 1=RTS driver control 4184 * 06 preamble enable 4185 * 05..04 preamble length 4186 * 03 share open/close flag 4187 * 02 reset 4188 * 01 enable 4189 * 00 auto-CTS enable 4190 */ 4191 val = BIT2; 4192 4193 switch(info->params.mode) { 4194 case MGSL_MODE_XSYNC: 4195 val |= BIT15 + BIT13; 4196 break; 4197 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; 4198 case MGSL_MODE_BISYNC: val |= BIT15; break; 4199 case MGSL_MODE_RAW: val |= BIT13; break; 4200 } 4201 if (info->if_mode & MGSL_INTERFACE_RTS_EN) 4202 val |= BIT7; 4203 4204 switch(info->params.encoding) 4205 { 4206 case HDLC_ENCODING_NRZB: val |= BIT10; break; 4207 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; 4208 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; 4209 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; 4210 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; 4211 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; 4212 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; 4213 } 4214 4215 switch (info->params.crc_type & HDLC_CRC_MASK) 4216 { 4217 case HDLC_CRC_16_CCITT: val |= BIT9; break; 4218 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; 4219 } 4220 4221 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) 4222 val |= BIT6; 4223 4224 switch (info->params.preamble_length) 4225 { 4226 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; 4227 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; 4228 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; 4229 } 4230 4231 if (info->params.flags & HDLC_FLAG_AUTO_CTS) 4232 val |= BIT0; 4233 4234 wr_reg16(info, TCR, val); 4235 4236 /* TPR (transmit preamble) */ 4237 4238 switch (info->params.preamble) 4239 { 4240 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; 4241 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; 4242 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; 4243 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; 4244 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; 4245 default: val = 0x7e; break; 4246 } 4247 wr_reg8(info, TPR, (unsigned char)val); 4248 4249 /* RCR (rx control) 4250 * 4251 * 15..13 mode 4252 * 000=HDLC/SDLC 4253 * 001=raw bit synchronous 4254 * 010=asynchronous/isochronous 4255 * 011=monosync byte synchronous 4256 * 100=bisync byte synchronous 4257 * 101=xsync byte synchronous 4258 * 12..10 encoding 4259 * 09 CRC enable 4260 * 08 CRC32 4261 * 07..03 reserved, must be 0 4262 * 02 reset 4263 * 01 enable 4264 * 00 auto-DCD enable 4265 */ 4266 val = 0; 4267 4268 switch(info->params.mode) { 4269 case MGSL_MODE_XSYNC: 4270 val |= BIT15 + BIT13; 4271 break; 4272 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; 4273 case MGSL_MODE_BISYNC: val |= BIT15; break; 4274 case MGSL_MODE_RAW: val |= BIT13; break; 4275 } 4276 4277 switch(info->params.encoding) 4278 { 4279 case HDLC_ENCODING_NRZB: val |= BIT10; break; 4280 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; 4281 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; 4282 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; 4283 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; 4284 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; 4285 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; 4286 } 4287 4288 switch (info->params.crc_type & HDLC_CRC_MASK) 4289 { 4290 case HDLC_CRC_16_CCITT: val |= BIT9; break; 4291 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; 4292 } 4293 4294 if (info->params.flags & HDLC_FLAG_AUTO_DCD) 4295 val |= BIT0; 4296 4297 wr_reg16(info, RCR, val); 4298 4299 /* CCR (clock control) 4300 * 4301 * 07..05 tx clock source 4302 * 04..02 rx clock source 4303 * 01 auxclk enable 4304 * 00 BRG enable 4305 */ 4306 val = 0; 4307 4308 if (info->params.flags & HDLC_FLAG_TXC_BRG) 4309 { 4310 // when RxC source is DPLL, BRG generates 16X DPLL 4311 // reference clock, so take TxC from BRG/16 to get 4312 // transmit clock at actual data rate 4313 if (info->params.flags & HDLC_FLAG_RXC_DPLL) 4314 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ 4315 else 4316 val |= BIT6; /* 010, txclk = BRG */ 4317 } 4318 else if (info->params.flags & HDLC_FLAG_TXC_DPLL) 4319 val |= BIT7; /* 100, txclk = DPLL Input */ 4320 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) 4321 val |= BIT5; /* 001, txclk = RXC Input */ 4322 4323 if (info->params.flags & HDLC_FLAG_RXC_BRG) 4324 val |= BIT3; /* 010, rxclk = BRG */ 4325 else if (info->params.flags & HDLC_FLAG_RXC_DPLL) 4326 val |= BIT4; /* 100, rxclk = DPLL */ 4327 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) 4328 val |= BIT2; /* 001, rxclk = TXC Input */ 4329 4330 if (info->params.clock_speed) 4331 val |= BIT1 + BIT0; 4332 4333 wr_reg8(info, CCR, (unsigned char)val); 4334 4335 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) 4336 { 4337 // program DPLL mode 4338 switch(info->params.encoding) 4339 { 4340 case HDLC_ENCODING_BIPHASE_MARK: 4341 case HDLC_ENCODING_BIPHASE_SPACE: 4342 val = BIT7; break; 4343 case HDLC_ENCODING_BIPHASE_LEVEL: 4344 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: 4345 val = BIT7 + BIT6; break; 4346 default: val = BIT6; // NRZ encodings 4347 } 4348 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); 4349 4350 // DPLL requires a 16X reference clock from BRG 4351 set_rate(info, info->params.clock_speed * 16); 4352 } 4353 else 4354 set_rate(info, info->params.clock_speed); 4355 4356 tx_set_idle(info); 4357 4358 msc_set_vcr(info); 4359 4360 /* SCR (serial control) 4361 * 4362 * 15 1=tx req on FIFO half empty 4363 * 14 1=rx req on FIFO half full 4364 * 13 tx data IRQ enable 4365 * 12 tx idle IRQ enable 4366 * 11 underrun IRQ enable 4367 * 10 rx data IRQ enable 4368 * 09 rx idle IRQ enable 4369 * 08 overrun IRQ enable 4370 * 07 DSR IRQ enable 4371 * 06 CTS IRQ enable 4372 * 05 DCD IRQ enable 4373 * 04 RI IRQ enable 4374 * 03 reserved, must be zero 4375 * 02 1=txd->rxd internal loopback enable 4376 * 01 reserved, must be zero 4377 * 00 1=master IRQ enable 4378 */ 4379 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); 4380 4381 if (info->params.loopback) 4382 enable_loopback(info); 4383 } 4384 4385 /* 4386 * set transmit idle mode 4387 */ 4388 static void tx_set_idle(struct slgt_info *info) 4389 { 4390 unsigned char val; 4391 unsigned short tcr; 4392 4393 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits 4394 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits 4395 */ 4396 tcr = rd_reg16(info, TCR); 4397 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) { 4398 /* disable preamble, set idle size to 16 bits */ 4399 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4; 4400 /* MSB of 16 bit idle specified in tx preamble register (TPR) */ 4401 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff)); 4402 } else if (!(tcr & BIT6)) { 4403 /* preamble is disabled, set idle size to 8 bits */ 4404 tcr &= ~(BIT5 + BIT4); 4405 } 4406 wr_reg16(info, TCR, tcr); 4407 4408 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) { 4409 /* LSB of custom tx idle specified in tx idle register */ 4410 val = (unsigned char)(info->idle_mode & 0xff); 4411 } else { 4412 /* standard 8 bit idle patterns */ 4413 switch(info->idle_mode) 4414 { 4415 case HDLC_TXIDLE_FLAGS: val = 0x7e; break; 4416 case HDLC_TXIDLE_ALT_ZEROS_ONES: 4417 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; 4418 case HDLC_TXIDLE_ZEROS: 4419 case HDLC_TXIDLE_SPACE: val = 0x00; break; 4420 default: val = 0xff; 4421 } 4422 } 4423 4424 wr_reg8(info, TIR, val); 4425 } 4426 4427 /* 4428 * get state of V24 status (input) signals 4429 */ 4430 static void get_gtsignals(struct slgt_info *info) 4431 { 4432 unsigned short status = rd_reg16(info, SSR); 4433 4434 /* clear all serial signals except RTS and DTR */ 4435 info->signals &= SerialSignal_RTS | SerialSignal_DTR; 4436 4437 if (status & BIT3) 4438 info->signals |= SerialSignal_DSR; 4439 if (status & BIT2) 4440 info->signals |= SerialSignal_CTS; 4441 if (status & BIT1) 4442 info->signals |= SerialSignal_DCD; 4443 if (status & BIT0) 4444 info->signals |= SerialSignal_RI; 4445 } 4446 4447 /* 4448 * set V.24 Control Register based on current configuration 4449 */ 4450 static void msc_set_vcr(struct slgt_info *info) 4451 { 4452 unsigned char val = 0; 4453 4454 /* VCR (V.24 control) 4455 * 4456 * 07..04 serial IF select 4457 * 03 DTR 4458 * 02 RTS 4459 * 01 LL 4460 * 00 RL 4461 */ 4462 4463 switch(info->if_mode & MGSL_INTERFACE_MASK) 4464 { 4465 case MGSL_INTERFACE_RS232: 4466 val |= BIT5; /* 0010 */ 4467 break; 4468 case MGSL_INTERFACE_V35: 4469 val |= BIT7 + BIT6 + BIT5; /* 1110 */ 4470 break; 4471 case MGSL_INTERFACE_RS422: 4472 val |= BIT6; /* 0100 */ 4473 break; 4474 } 4475 4476 if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) 4477 val |= BIT4; 4478 if (info->signals & SerialSignal_DTR) 4479 val |= BIT3; 4480 if (info->signals & SerialSignal_RTS) 4481 val |= BIT2; 4482 if (info->if_mode & MGSL_INTERFACE_LL) 4483 val |= BIT1; 4484 if (info->if_mode & MGSL_INTERFACE_RL) 4485 val |= BIT0; 4486 wr_reg8(info, VCR, val); 4487 } 4488 4489 /* 4490 * set state of V24 control (output) signals 4491 */ 4492 static void set_gtsignals(struct slgt_info *info) 4493 { 4494 unsigned char val = rd_reg8(info, VCR); 4495 if (info->signals & SerialSignal_DTR) 4496 val |= BIT3; 4497 else 4498 val &= ~BIT3; 4499 if (info->signals & SerialSignal_RTS) 4500 val |= BIT2; 4501 else 4502 val &= ~BIT2; 4503 wr_reg8(info, VCR, val); 4504 } 4505 4506 /* 4507 * free range of receive DMA buffers (i to last) 4508 */ 4509 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) 4510 { 4511 int done = 0; 4512 4513 while(!done) { 4514 /* reset current buffer for reuse */ 4515 info->rbufs[i].status = 0; 4516 set_desc_count(info->rbufs[i], info->rbuf_fill_level); 4517 if (i == last) 4518 done = 1; 4519 if (++i == info->rbuf_count) 4520 i = 0; 4521 } 4522 info->rbuf_current = i; 4523 } 4524 4525 /* 4526 * mark all receive DMA buffers as free 4527 */ 4528 static void reset_rbufs(struct slgt_info *info) 4529 { 4530 free_rbufs(info, 0, info->rbuf_count - 1); 4531 info->rbuf_fill_index = 0; 4532 info->rbuf_fill_count = 0; 4533 } 4534 4535 /* 4536 * pass receive HDLC frame to upper layer 4537 * 4538 * return true if frame available, otherwise false 4539 */ 4540 static bool rx_get_frame(struct slgt_info *info) 4541 { 4542 unsigned int start, end; 4543 unsigned short status; 4544 unsigned int framesize = 0; 4545 unsigned long flags; 4546 struct tty_struct *tty = info->port.tty; 4547 unsigned char addr_field = 0xff; 4548 unsigned int crc_size = 0; 4549 4550 switch (info->params.crc_type & HDLC_CRC_MASK) { 4551 case HDLC_CRC_16_CCITT: crc_size = 2; break; 4552 case HDLC_CRC_32_CCITT: crc_size = 4; break; 4553 } 4554 4555 check_again: 4556 4557 framesize = 0; 4558 addr_field = 0xff; 4559 start = end = info->rbuf_current; 4560 4561 for (;;) { 4562 if (!desc_complete(info->rbufs[end])) 4563 goto cleanup; 4564 4565 if (framesize == 0 && info->params.addr_filter != 0xff) 4566 addr_field = info->rbufs[end].buf[0]; 4567 4568 framesize += desc_count(info->rbufs[end]); 4569 4570 if (desc_eof(info->rbufs[end])) 4571 break; 4572 4573 if (++end == info->rbuf_count) 4574 end = 0; 4575 4576 if (end == info->rbuf_current) { 4577 if (info->rx_enabled){ 4578 spin_lock_irqsave(&info->lock,flags); 4579 rx_start(info); 4580 spin_unlock_irqrestore(&info->lock,flags); 4581 } 4582 goto cleanup; 4583 } 4584 } 4585 4586 /* status 4587 * 4588 * 15 buffer complete 4589 * 14..06 reserved 4590 * 05..04 residue 4591 * 02 eof (end of frame) 4592 * 01 CRC error 4593 * 00 abort 4594 */ 4595 status = desc_status(info->rbufs[end]); 4596 4597 /* ignore CRC bit if not using CRC (bit is undefined) */ 4598 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE) 4599 status &= ~BIT1; 4600 4601 if (framesize == 0 || 4602 (addr_field != 0xff && addr_field != info->params.addr_filter)) { 4603 free_rbufs(info, start, end); 4604 goto check_again; 4605 } 4606 4607 if (framesize < (2 + crc_size) || status & BIT0) { 4608 info->icount.rxshort++; 4609 framesize = 0; 4610 } else if (status & BIT1) { 4611 info->icount.rxcrc++; 4612 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) 4613 framesize = 0; 4614 } 4615 4616 #if SYNCLINK_GENERIC_HDLC 4617 if (framesize == 0) { 4618 info->netdev->stats.rx_errors++; 4619 info->netdev->stats.rx_frame_errors++; 4620 } 4621 #endif 4622 4623 DBGBH(("%s rx frame status=%04X size=%d\n", 4624 info->device_name, status, framesize)); 4625 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); 4626 4627 if (framesize) { 4628 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { 4629 framesize -= crc_size; 4630 crc_size = 0; 4631 } 4632 4633 if (framesize > info->max_frame_size + crc_size) 4634 info->icount.rxlong++; 4635 else { 4636 /* copy dma buffer(s) to contiguous temp buffer */ 4637 int copy_count = framesize; 4638 int i = start; 4639 unsigned char *p = info->tmp_rbuf; 4640 info->tmp_rbuf_count = framesize; 4641 4642 info->icount.rxok++; 4643 4644 while(copy_count) { 4645 int partial_count = min_t(int, copy_count, info->rbuf_fill_level); 4646 memcpy(p, info->rbufs[i].buf, partial_count); 4647 p += partial_count; 4648 copy_count -= partial_count; 4649 if (++i == info->rbuf_count) 4650 i = 0; 4651 } 4652 4653 if (info->params.crc_type & HDLC_CRC_RETURN_EX) { 4654 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK; 4655 framesize++; 4656 } 4657 4658 #if SYNCLINK_GENERIC_HDLC 4659 if (info->netcount) 4660 hdlcdev_rx(info,info->tmp_rbuf, framesize); 4661 else 4662 #endif 4663 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); 4664 } 4665 } 4666 free_rbufs(info, start, end); 4667 return true; 4668 4669 cleanup: 4670 return false; 4671 } 4672 4673 /* 4674 * pass receive buffer (RAW synchronous mode) to tty layer 4675 * return true if buffer available, otherwise false 4676 */ 4677 static bool rx_get_buf(struct slgt_info *info) 4678 { 4679 unsigned int i = info->rbuf_current; 4680 unsigned int count; 4681 4682 if (!desc_complete(info->rbufs[i])) 4683 return false; 4684 count = desc_count(info->rbufs[i]); 4685 switch(info->params.mode) { 4686 case MGSL_MODE_MONOSYNC: 4687 case MGSL_MODE_BISYNC: 4688 case MGSL_MODE_XSYNC: 4689 /* ignore residue in byte synchronous modes */ 4690 if (desc_residue(info->rbufs[i])) 4691 count--; 4692 break; 4693 } 4694 DBGDATA(info, info->rbufs[i].buf, count, "rx"); 4695 DBGINFO(("rx_get_buf size=%d\n", count)); 4696 if (count) 4697 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, 4698 info->flag_buf, count); 4699 free_rbufs(info, i, i); 4700 return true; 4701 } 4702 4703 static void reset_tbufs(struct slgt_info *info) 4704 { 4705 unsigned int i; 4706 info->tbuf_current = 0; 4707 for (i=0 ; i < info->tbuf_count ; i++) { 4708 info->tbufs[i].status = 0; 4709 info->tbufs[i].count = 0; 4710 } 4711 } 4712 4713 /* 4714 * return number of free transmit DMA buffers 4715 */ 4716 static unsigned int free_tbuf_count(struct slgt_info *info) 4717 { 4718 unsigned int count = 0; 4719 unsigned int i = info->tbuf_current; 4720 4721 do 4722 { 4723 if (desc_count(info->tbufs[i])) 4724 break; /* buffer in use */ 4725 ++count; 4726 if (++i == info->tbuf_count) 4727 i=0; 4728 } while (i != info->tbuf_current); 4729 4730 /* if tx DMA active, last zero count buffer is in use */ 4731 if (count && (rd_reg32(info, TDCSR) & BIT0)) 4732 --count; 4733 4734 return count; 4735 } 4736 4737 /* 4738 * return number of bytes in unsent transmit DMA buffers 4739 * and the serial controller tx FIFO 4740 */ 4741 static unsigned int tbuf_bytes(struct slgt_info *info) 4742 { 4743 unsigned int total_count = 0; 4744 unsigned int i = info->tbuf_current; 4745 unsigned int reg_value; 4746 unsigned int count; 4747 unsigned int active_buf_count = 0; 4748 4749 /* 4750 * Add descriptor counts for all tx DMA buffers. 4751 * If count is zero (cleared by DMA controller after read), 4752 * the buffer is complete or is actively being read from. 4753 * 4754 * Record buf_count of last buffer with zero count starting 4755 * from current ring position. buf_count is mirror 4756 * copy of count and is not cleared by serial controller. 4757 * If DMA controller is active, that buffer is actively 4758 * being read so add to total. 4759 */ 4760 do { 4761 count = desc_count(info->tbufs[i]); 4762 if (count) 4763 total_count += count; 4764 else if (!total_count) 4765 active_buf_count = info->tbufs[i].buf_count; 4766 if (++i == info->tbuf_count) 4767 i = 0; 4768 } while (i != info->tbuf_current); 4769 4770 /* read tx DMA status register */ 4771 reg_value = rd_reg32(info, TDCSR); 4772 4773 /* if tx DMA active, last zero count buffer is in use */ 4774 if (reg_value & BIT0) 4775 total_count += active_buf_count; 4776 4777 /* add tx FIFO count = reg_value[15..8] */ 4778 total_count += (reg_value >> 8) & 0xff; 4779 4780 /* if transmitter active add one byte for shift register */ 4781 if (info->tx_active) 4782 total_count++; 4783 4784 return total_count; 4785 } 4786 4787 /* 4788 * load data into transmit DMA buffer ring and start transmitter if needed 4789 * return true if data accepted, otherwise false (buffers full) 4790 */ 4791 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) 4792 { 4793 unsigned short count; 4794 unsigned int i; 4795 struct slgt_desc *d; 4796 4797 /* check required buffer space */ 4798 if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) 4799 return false; 4800 4801 DBGDATA(info, buf, size, "tx"); 4802 4803 /* 4804 * copy data to one or more DMA buffers in circular ring 4805 * tbuf_start = first buffer for this data 4806 * tbuf_current = next free buffer 4807 * 4808 * Copy all data before making data visible to DMA controller by 4809 * setting descriptor count of the first buffer. 4810 * This prevents an active DMA controller from reading the first DMA 4811 * buffers of a frame and stopping before the final buffers are filled. 4812 */ 4813 4814 info->tbuf_start = i = info->tbuf_current; 4815 4816 while (size) { 4817 d = &info->tbufs[i]; 4818 4819 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); 4820 memcpy(d->buf, buf, count); 4821 4822 size -= count; 4823 buf += count; 4824 4825 /* 4826 * set EOF bit for last buffer of HDLC frame or 4827 * for every buffer in raw mode 4828 */ 4829 if ((!size && info->params.mode == MGSL_MODE_HDLC) || 4830 info->params.mode == MGSL_MODE_RAW) 4831 set_desc_eof(*d, 1); 4832 else 4833 set_desc_eof(*d, 0); 4834 4835 /* set descriptor count for all but first buffer */ 4836 if (i != info->tbuf_start) 4837 set_desc_count(*d, count); 4838 d->buf_count = count; 4839 4840 if (++i == info->tbuf_count) 4841 i = 0; 4842 } 4843 4844 info->tbuf_current = i; 4845 4846 /* set first buffer count to make new data visible to DMA controller */ 4847 d = &info->tbufs[info->tbuf_start]; 4848 set_desc_count(*d, d->buf_count); 4849 4850 /* start transmitter if needed and update transmit timeout */ 4851 if (!info->tx_active) 4852 tx_start(info); 4853 update_tx_timer(info); 4854 4855 return true; 4856 } 4857 4858 static int register_test(struct slgt_info *info) 4859 { 4860 static unsigned short patterns[] = 4861 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; 4862 static unsigned int count = ARRAY_SIZE(patterns); 4863 unsigned int i; 4864 int rc = 0; 4865 4866 for (i=0 ; i < count ; i++) { 4867 wr_reg16(info, TIR, patterns[i]); 4868 wr_reg16(info, BDR, patterns[(i+1)%count]); 4869 if ((rd_reg16(info, TIR) != patterns[i]) || 4870 (rd_reg16(info, BDR) != patterns[(i+1)%count])) { 4871 rc = -ENODEV; 4872 break; 4873 } 4874 } 4875 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0; 4876 info->init_error = rc ? 0 : DiagStatus_AddressFailure; 4877 return rc; 4878 } 4879 4880 static int irq_test(struct slgt_info *info) 4881 { 4882 unsigned long timeout; 4883 unsigned long flags; 4884 struct tty_struct *oldtty = info->port.tty; 4885 u32 speed = info->params.data_rate; 4886 4887 info->params.data_rate = 921600; 4888 info->port.tty = NULL; 4889 4890 spin_lock_irqsave(&info->lock, flags); 4891 async_mode(info); 4892 slgt_irq_on(info, IRQ_TXIDLE); 4893 4894 /* enable transmitter */ 4895 wr_reg16(info, TCR, 4896 (unsigned short)(rd_reg16(info, TCR) | BIT1)); 4897 4898 /* write one byte and wait for tx idle */ 4899 wr_reg16(info, TDR, 0); 4900 4901 /* assume failure */ 4902 info->init_error = DiagStatus_IrqFailure; 4903 info->irq_occurred = false; 4904 4905 spin_unlock_irqrestore(&info->lock, flags); 4906 4907 timeout=100; 4908 while(timeout-- && !info->irq_occurred) 4909 msleep_interruptible(10); 4910 4911 spin_lock_irqsave(&info->lock,flags); 4912 reset_port(info); 4913 spin_unlock_irqrestore(&info->lock,flags); 4914 4915 info->params.data_rate = speed; 4916 info->port.tty = oldtty; 4917 4918 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; 4919 return info->irq_occurred ? 0 : -ENODEV; 4920 } 4921 4922 static int loopback_test_rx(struct slgt_info *info) 4923 { 4924 unsigned char *src, *dest; 4925 int count; 4926 4927 if (desc_complete(info->rbufs[0])) { 4928 count = desc_count(info->rbufs[0]); 4929 src = info->rbufs[0].buf; 4930 dest = info->tmp_rbuf; 4931 4932 for( ; count ; count-=2, src+=2) { 4933 /* src=data byte (src+1)=status byte */ 4934 if (!(*(src+1) & (BIT9 + BIT8))) { 4935 *dest = *src; 4936 dest++; 4937 info->tmp_rbuf_count++; 4938 } 4939 } 4940 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); 4941 return 1; 4942 } 4943 return 0; 4944 } 4945 4946 static int loopback_test(struct slgt_info *info) 4947 { 4948 #define TESTFRAMESIZE 20 4949 4950 unsigned long timeout; 4951 u16 count; 4952 unsigned char buf[TESTFRAMESIZE]; 4953 int rc = -ENODEV; 4954 unsigned long flags; 4955 4956 struct tty_struct *oldtty = info->port.tty; 4957 MGSL_PARAMS params; 4958 4959 memcpy(¶ms, &info->params, sizeof(params)); 4960 4961 info->params.mode = MGSL_MODE_ASYNC; 4962 info->params.data_rate = 921600; 4963 info->params.loopback = 1; 4964 info->port.tty = NULL; 4965 4966 /* build and send transmit frame */ 4967 for (count = 0; count < TESTFRAMESIZE; ++count) 4968 buf[count] = (unsigned char)count; 4969 4970 info->tmp_rbuf_count = 0; 4971 memset(info->tmp_rbuf, 0, TESTFRAMESIZE); 4972 4973 /* program hardware for HDLC and enabled receiver */ 4974 spin_lock_irqsave(&info->lock,flags); 4975 async_mode(info); 4976 rx_start(info); 4977 tx_load(info, buf, count); 4978 spin_unlock_irqrestore(&info->lock, flags); 4979 4980 /* wait for receive complete */ 4981 for (timeout = 100; timeout; --timeout) { 4982 msleep_interruptible(10); 4983 if (loopback_test_rx(info)) { 4984 rc = 0; 4985 break; 4986 } 4987 } 4988 4989 /* verify received frame length and contents */ 4990 if (!rc && (info->tmp_rbuf_count != count || 4991 memcmp(buf, info->tmp_rbuf, count))) { 4992 rc = -ENODEV; 4993 } 4994 4995 spin_lock_irqsave(&info->lock,flags); 4996 reset_adapter(info); 4997 spin_unlock_irqrestore(&info->lock,flags); 4998 4999 memcpy(&info->params, ¶ms, sizeof(info->params)); 5000 info->port.tty = oldtty; 5001 5002 info->init_error = rc ? DiagStatus_DmaFailure : 0; 5003 return rc; 5004 } 5005 5006 static int adapter_test(struct slgt_info *info) 5007 { 5008 DBGINFO(("testing %s\n", info->device_name)); 5009 if (register_test(info) < 0) { 5010 printk("register test failure %s addr=%08X\n", 5011 info->device_name, info->phys_reg_addr); 5012 } else if (irq_test(info) < 0) { 5013 printk("IRQ test failure %s IRQ=%d\n", 5014 info->device_name, info->irq_level); 5015 } else if (loopback_test(info) < 0) { 5016 printk("loopback test failure %s\n", info->device_name); 5017 } 5018 return info->init_error; 5019 } 5020 5021 /* 5022 * transmit timeout handler 5023 */ 5024 static void tx_timeout(struct timer_list *t) 5025 { 5026 struct slgt_info *info = from_timer(info, t, tx_timer); 5027 unsigned long flags; 5028 5029 DBGINFO(("%s tx_timeout\n", info->device_name)); 5030 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { 5031 info->icount.txtimeout++; 5032 } 5033 spin_lock_irqsave(&info->lock,flags); 5034 tx_stop(info); 5035 spin_unlock_irqrestore(&info->lock,flags); 5036 5037 #if SYNCLINK_GENERIC_HDLC 5038 if (info->netcount) 5039 hdlcdev_tx_done(info); 5040 else 5041 #endif 5042 bh_transmit(info); 5043 } 5044 5045 /* 5046 * receive buffer polling timer 5047 */ 5048 static void rx_timeout(struct timer_list *t) 5049 { 5050 struct slgt_info *info = from_timer(info, t, rx_timer); 5051 unsigned long flags; 5052 5053 DBGINFO(("%s rx_timeout\n", info->device_name)); 5054 spin_lock_irqsave(&info->lock, flags); 5055 info->pending_bh |= BH_RECEIVE; 5056 spin_unlock_irqrestore(&info->lock, flags); 5057 bh_handler(&info->task); 5058 } 5059 5060