1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
4 *
5 * Based on msm_serial.c, which is:
6 * Copyright (C) 2007 Google, Inc.
7 * Author: Robert Love <rlove@google.com>
8 */
9
10 #include <linux/hrtimer.h>
11 #include <linux/delay.h>
12 #include <linux/io.h>
13 #include <linux/ioport.h>
14 #include <linux/irq.h>
15 #include <linux/init.h>
16 #include <linux/console.h>
17 #include <linux/platform_device.h>
18 #include <linux/tty.h>
19 #include <linux/tty_flip.h>
20 #include <linux/serial_core.h>
21 #include <linux/serial.h>
22 #include <linux/slab.h>
23 #include <linux/clk.h>
24 #include <linux/of.h>
25 #include <linux/err.h>
26
27 /*
28 * UART Register offsets
29 */
30
31 #define VT8500_URTDR 0x0000 /* Transmit data */
32 #define VT8500_URRDR 0x0004 /* Receive data */
33 #define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */
34 #define VT8500_URLCR 0x000C /* Line control */
35 #define VT8500_URICR 0x0010 /* IrDA control */
36 #define VT8500_URIER 0x0014 /* Interrupt enable */
37 #define VT8500_URISR 0x0018 /* Interrupt status */
38 #define VT8500_URUSR 0x001c /* UART status */
39 #define VT8500_URFCR 0x0020 /* FIFO control */
40 #define VT8500_URFIDX 0x0024 /* FIFO index */
41 #define VT8500_URBKR 0x0028 /* Break signal count */
42 #define VT8500_URTOD 0x002c /* Time out divisor */
43 #define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */
44 #define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */
45
46 /*
47 * Interrupt enable and status bits
48 */
49
50 #define TXDE (1 << 0) /* Tx Data empty */
51 #define RXDF (1 << 1) /* Rx Data full */
52 #define TXFAE (1 << 2) /* Tx FIFO almost empty */
53 #define TXFE (1 << 3) /* Tx FIFO empty */
54 #define RXFAF (1 << 4) /* Rx FIFO almost full */
55 #define RXFF (1 << 5) /* Rx FIFO full */
56 #define TXUDR (1 << 6) /* Tx underrun */
57 #define RXOVER (1 << 7) /* Rx overrun */
58 #define PER (1 << 8) /* Parity error */
59 #define FER (1 << 9) /* Frame error */
60 #define TCTS (1 << 10) /* Toggle of CTS */
61 #define RXTOUT (1 << 11) /* Rx timeout */
62 #define BKDONE (1 << 12) /* Break signal done */
63 #define ERR (1 << 13) /* AHB error response */
64
65 #define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
66 #define TX_FIFO_INTS (TXFAE | TXFE | TXUDR)
67
68 /*
69 * Line control bits
70 */
71
72 #define VT8500_TXEN (1 << 0) /* Enable transmit logic */
73 #define VT8500_RXEN (1 << 1) /* Enable receive logic */
74 #define VT8500_CS8 (1 << 2) /* 8-bit data length (vs. 7-bit) */
75 #define VT8500_CSTOPB (1 << 3) /* 2 stop bits (vs. 1) */
76 #define VT8500_PARENB (1 << 4) /* Enable parity */
77 #define VT8500_PARODD (1 << 5) /* Odd parity (vs. even) */
78 #define VT8500_RTS (1 << 6) /* Ready to send */
79 #define VT8500_LOOPBK (1 << 7) /* Enable internal loopback */
80 #define VT8500_DMA (1 << 8) /* Enable DMA mode (needs FIFO) */
81 #define VT8500_BREAK (1 << 9) /* Initiate break signal */
82 #define VT8500_PSLVERR (1 << 10) /* APB error upon empty RX FIFO read */
83 #define VT8500_SWRTSCTS (1 << 11) /* Software-controlled RTS/CTS */
84
85 /*
86 * Capability flags (driver-internal)
87 */
88
89 #define VT8500_HAS_SWRTSCTS_SWITCH (1 << 1)
90
91 #define VT8500_RECOMMENDED_CLK 12000000
92 #define VT8500_OVERSAMPLING_DIVISOR 13
93 #define VT8500_MAX_PORTS 6
94
95 struct vt8500_port {
96 struct uart_port uart;
97 char name[16];
98 struct clk *clk;
99 unsigned int clk_predivisor;
100 unsigned int ier;
101 unsigned int vt8500_uart_flags;
102 };
103
104 /*
105 * we use this variable to keep track of which ports
106 * have been allocated as we can't use pdev->id in
107 * devicetree
108 */
109 static DECLARE_BITMAP(vt8500_ports_in_use, VT8500_MAX_PORTS);
110
vt8500_write(struct uart_port * port,unsigned int val,unsigned int off)111 static inline void vt8500_write(struct uart_port *port, unsigned int val,
112 unsigned int off)
113 {
114 writel(val, port->membase + off);
115 }
116
vt8500_read(struct uart_port * port,unsigned int off)117 static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off)
118 {
119 return readl(port->membase + off);
120 }
121
vt8500_stop_tx(struct uart_port * port)122 static void vt8500_stop_tx(struct uart_port *port)
123 {
124 struct vt8500_port *vt8500_port = container_of(port,
125 struct vt8500_port,
126 uart);
127
128 vt8500_port->ier &= ~TX_FIFO_INTS;
129 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
130 }
131
vt8500_stop_rx(struct uart_port * port)132 static void vt8500_stop_rx(struct uart_port *port)
133 {
134 struct vt8500_port *vt8500_port = container_of(port,
135 struct vt8500_port,
136 uart);
137
138 vt8500_port->ier &= ~RX_FIFO_INTS;
139 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
140 }
141
vt8500_enable_ms(struct uart_port * port)142 static void vt8500_enable_ms(struct uart_port *port)
143 {
144 struct vt8500_port *vt8500_port = container_of(port,
145 struct vt8500_port,
146 uart);
147
148 vt8500_port->ier |= TCTS;
149 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
150 }
151
handle_rx(struct uart_port * port)152 static void handle_rx(struct uart_port *port)
153 {
154 struct tty_port *tport = &port->state->port;
155
156 /*
157 * Handle overrun
158 */
159 if ((vt8500_read(port, VT8500_URISR) & RXOVER)) {
160 port->icount.overrun++;
161 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
162 }
163
164 /* and now the main RX loop */
165 while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) {
166 unsigned int c;
167 char flag = TTY_NORMAL;
168
169 c = readw(port->membase + VT8500_RXFIFO) & 0x3ff;
170
171 /* Mask conditions we're ignoring. */
172 c &= ~port->read_status_mask;
173
174 if (c & FER) {
175 port->icount.frame++;
176 flag = TTY_FRAME;
177 } else if (c & PER) {
178 port->icount.parity++;
179 flag = TTY_PARITY;
180 }
181 port->icount.rx++;
182
183 if (!uart_handle_sysrq_char(port, c))
184 tty_insert_flip_char(tport, c, flag);
185 }
186
187 tty_flip_buffer_push(tport);
188 }
189
vt8500_tx_empty(struct uart_port * port)190 static unsigned int vt8500_tx_empty(struct uart_port *port)
191 {
192 unsigned int idx = vt8500_read(port, VT8500_URFIDX) & 0x1f;
193
194 return idx < 16 ? TIOCSER_TEMT : 0;
195 }
196
handle_tx(struct uart_port * port)197 static void handle_tx(struct uart_port *port)
198 {
199 u8 ch;
200
201 uart_port_tx(port, ch,
202 vt8500_tx_empty(port),
203 writeb(ch, port->membase + VT8500_TXFIFO));
204 }
205
vt8500_start_tx(struct uart_port * port)206 static void vt8500_start_tx(struct uart_port *port)
207 {
208 struct vt8500_port *vt8500_port = container_of(port,
209 struct vt8500_port,
210 uart);
211
212 vt8500_port->ier &= ~TX_FIFO_INTS;
213 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
214 handle_tx(port);
215 vt8500_port->ier |= TX_FIFO_INTS;
216 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
217 }
218
handle_delta_cts(struct uart_port * port)219 static void handle_delta_cts(struct uart_port *port)
220 {
221 port->icount.cts++;
222 wake_up_interruptible(&port->state->port.delta_msr_wait);
223 }
224
vt8500_irq(int irq,void * dev_id)225 static irqreturn_t vt8500_irq(int irq, void *dev_id)
226 {
227 struct uart_port *port = dev_id;
228 unsigned long isr;
229
230 spin_lock(&port->lock);
231 isr = vt8500_read(port, VT8500_URISR);
232
233 /* Acknowledge active status bits */
234 vt8500_write(port, isr, VT8500_URISR);
235
236 if (isr & RX_FIFO_INTS)
237 handle_rx(port);
238 if (isr & TX_FIFO_INTS)
239 handle_tx(port);
240 if (isr & TCTS)
241 handle_delta_cts(port);
242
243 spin_unlock(&port->lock);
244
245 return IRQ_HANDLED;
246 }
247
vt8500_get_mctrl(struct uart_port * port)248 static unsigned int vt8500_get_mctrl(struct uart_port *port)
249 {
250 unsigned int usr;
251
252 usr = vt8500_read(port, VT8500_URUSR);
253 if (usr & (1 << 4))
254 return TIOCM_CTS;
255 else
256 return 0;
257 }
258
vt8500_set_mctrl(struct uart_port * port,unsigned int mctrl)259 static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl)
260 {
261 unsigned int lcr = vt8500_read(port, VT8500_URLCR);
262
263 if (mctrl & TIOCM_RTS)
264 lcr |= VT8500_RTS;
265 else
266 lcr &= ~VT8500_RTS;
267
268 vt8500_write(port, lcr, VT8500_URLCR);
269 }
270
vt8500_break_ctl(struct uart_port * port,int break_ctl)271 static void vt8500_break_ctl(struct uart_port *port, int break_ctl)
272 {
273 if (break_ctl)
274 vt8500_write(port,
275 vt8500_read(port, VT8500_URLCR) | VT8500_BREAK,
276 VT8500_URLCR);
277 }
278
vt8500_set_baud_rate(struct uart_port * port,unsigned int baud)279 static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud)
280 {
281 struct vt8500_port *vt8500_port =
282 container_of(port, struct vt8500_port, uart);
283 unsigned long div;
284 unsigned int loops = 1000;
285
286 div = ((vt8500_port->clk_predivisor - 1) & 0xf) << 16;
287 div |= (uart_get_divisor(port, baud) - 1) & 0x3ff;
288
289 /* Effective baud rate */
290 baud = port->uartclk / 16 / ((div & 0x3ff) + 1);
291
292 while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops)
293 cpu_relax();
294
295 vt8500_write(port, div, VT8500_URDIV);
296
297 /* Break signal timing depends on baud rate, update accordingly */
298 vt8500_write(port, mult_frac(baud, 4096, 1000000), VT8500_URBKR);
299
300 return baud;
301 }
302
vt8500_startup(struct uart_port * port)303 static int vt8500_startup(struct uart_port *port)
304 {
305 struct vt8500_port *vt8500_port =
306 container_of(port, struct vt8500_port, uart);
307 int ret;
308
309 snprintf(vt8500_port->name, sizeof(vt8500_port->name),
310 "vt8500_serial%d", port->line);
311
312 ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH,
313 vt8500_port->name, port);
314 if (unlikely(ret))
315 return ret;
316
317 vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */
318
319 return 0;
320 }
321
vt8500_shutdown(struct uart_port * port)322 static void vt8500_shutdown(struct uart_port *port)
323 {
324 struct vt8500_port *vt8500_port =
325 container_of(port, struct vt8500_port, uart);
326
327 vt8500_port->ier = 0;
328
329 /* disable interrupts and FIFOs */
330 vt8500_write(&vt8500_port->uart, 0, VT8500_URIER);
331 vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR);
332 free_irq(port->irq, port);
333 }
334
vt8500_set_termios(struct uart_port * port,struct ktermios * termios,const struct ktermios * old)335 static void vt8500_set_termios(struct uart_port *port,
336 struct ktermios *termios,
337 const struct ktermios *old)
338 {
339 struct vt8500_port *vt8500_port =
340 container_of(port, struct vt8500_port, uart);
341 unsigned long flags;
342 unsigned int baud, lcr;
343 unsigned int loops = 1000;
344
345 spin_lock_irqsave(&port->lock, flags);
346
347 /* calculate and set baud rate */
348 baud = uart_get_baud_rate(port, termios, old, 900, 921600);
349 baud = vt8500_set_baud_rate(port, baud);
350 if (tty_termios_baud_rate(termios))
351 tty_termios_encode_baud_rate(termios, baud, baud);
352
353 /* calculate parity */
354 lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR);
355 lcr &= ~(VT8500_PARENB | VT8500_PARODD);
356 if (termios->c_cflag & PARENB) {
357 lcr |= VT8500_PARENB;
358 termios->c_cflag &= ~CMSPAR;
359 if (termios->c_cflag & PARODD)
360 lcr |= VT8500_PARODD;
361 }
362
363 /* calculate bits per char */
364 lcr &= ~VT8500_CS8;
365 switch (termios->c_cflag & CSIZE) {
366 case CS7:
367 break;
368 case CS8:
369 default:
370 lcr |= VT8500_CS8;
371 termios->c_cflag &= ~CSIZE;
372 termios->c_cflag |= CS8;
373 break;
374 }
375
376 /* calculate stop bits */
377 lcr &= ~VT8500_CSTOPB;
378 if (termios->c_cflag & CSTOPB)
379 lcr |= VT8500_CSTOPB;
380
381 lcr &= ~VT8500_SWRTSCTS;
382 if (vt8500_port->vt8500_uart_flags & VT8500_HAS_SWRTSCTS_SWITCH)
383 lcr |= VT8500_SWRTSCTS;
384
385 /* set parity, bits per char, and stop bit */
386 vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR);
387
388 /* Configure status bits to ignore based on termio flags. */
389 port->read_status_mask = 0;
390 if (termios->c_iflag & IGNPAR)
391 port->read_status_mask = FER | PER;
392
393 uart_update_timeout(port, termios->c_cflag, baud);
394
395 /* Reset FIFOs */
396 vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR);
397 while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc)
398 && --loops)
399 cpu_relax();
400
401 /* Every possible FIFO-related interrupt */
402 vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS;
403
404 /*
405 * CTS flow control
406 */
407 if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag))
408 vt8500_port->ier |= TCTS;
409
410 vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR);
411 vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER);
412
413 spin_unlock_irqrestore(&port->lock, flags);
414 }
415
vt8500_type(struct uart_port * port)416 static const char *vt8500_type(struct uart_port *port)
417 {
418 struct vt8500_port *vt8500_port =
419 container_of(port, struct vt8500_port, uart);
420 return vt8500_port->name;
421 }
422
vt8500_release_port(struct uart_port * port)423 static void vt8500_release_port(struct uart_port *port)
424 {
425 }
426
vt8500_request_port(struct uart_port * port)427 static int vt8500_request_port(struct uart_port *port)
428 {
429 return 0;
430 }
431
vt8500_config_port(struct uart_port * port,int flags)432 static void vt8500_config_port(struct uart_port *port, int flags)
433 {
434 port->type = PORT_VT8500;
435 }
436
vt8500_verify_port(struct uart_port * port,struct serial_struct * ser)437 static int vt8500_verify_port(struct uart_port *port,
438 struct serial_struct *ser)
439 {
440 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500))
441 return -EINVAL;
442 if (unlikely(port->irq != ser->irq))
443 return -EINVAL;
444 return 0;
445 }
446
447 static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS];
448 static struct uart_driver vt8500_uart_driver;
449
450 #ifdef CONFIG_SERIAL_VT8500_CONSOLE
451
wait_for_xmitr(struct uart_port * port)452 static void wait_for_xmitr(struct uart_port *port)
453 {
454 unsigned int status, tmout = 10000;
455
456 /* Wait up to 10ms for the character(s) to be sent. */
457 do {
458 status = vt8500_read(port, VT8500_URFIDX);
459
460 if (--tmout == 0)
461 break;
462 udelay(1);
463 } while (status & 0x10);
464 }
465
vt8500_console_putchar(struct uart_port * port,unsigned char c)466 static void vt8500_console_putchar(struct uart_port *port, unsigned char c)
467 {
468 wait_for_xmitr(port);
469 writeb(c, port->membase + VT8500_TXFIFO);
470 }
471
vt8500_console_write(struct console * co,const char * s,unsigned int count)472 static void vt8500_console_write(struct console *co, const char *s,
473 unsigned int count)
474 {
475 struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index];
476 unsigned long ier;
477
478 BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr);
479
480 ier = vt8500_read(&vt8500_port->uart, VT8500_URIER);
481 vt8500_write(&vt8500_port->uart, VT8500_URIER, 0);
482
483 uart_console_write(&vt8500_port->uart, s, count,
484 vt8500_console_putchar);
485
486 /*
487 * Finally, wait for transmitter to become empty
488 * and switch back to FIFO
489 */
490 wait_for_xmitr(&vt8500_port->uart);
491 vt8500_write(&vt8500_port->uart, VT8500_URIER, ier);
492 }
493
vt8500_console_setup(struct console * co,char * options)494 static int __init vt8500_console_setup(struct console *co, char *options)
495 {
496 struct vt8500_port *vt8500_port;
497 int baud = 9600;
498 int bits = 8;
499 int parity = 'n';
500 int flow = 'n';
501
502 if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0))
503 return -ENXIO;
504
505 vt8500_port = vt8500_uart_ports[co->index];
506
507 if (!vt8500_port)
508 return -ENODEV;
509
510 if (options)
511 uart_parse_options(options, &baud, &parity, &bits, &flow);
512
513 return uart_set_options(&vt8500_port->uart,
514 co, baud, parity, bits, flow);
515 }
516
517 static struct console vt8500_console = {
518 .name = "ttyWMT",
519 .write = vt8500_console_write,
520 .device = uart_console_device,
521 .setup = vt8500_console_setup,
522 .flags = CON_PRINTBUFFER,
523 .index = -1,
524 .data = &vt8500_uart_driver,
525 };
526
527 #define VT8500_CONSOLE (&vt8500_console)
528
529 #else
530 #define VT8500_CONSOLE NULL
531 #endif
532
533 #ifdef CONFIG_CONSOLE_POLL
vt8500_get_poll_char(struct uart_port * port)534 static int vt8500_get_poll_char(struct uart_port *port)
535 {
536 unsigned int status = vt8500_read(port, VT8500_URFIDX);
537
538 if (!(status & 0x1f00))
539 return NO_POLL_CHAR;
540
541 return vt8500_read(port, VT8500_RXFIFO) & 0xff;
542 }
543
vt8500_put_poll_char(struct uart_port * port,unsigned char c)544 static void vt8500_put_poll_char(struct uart_port *port, unsigned char c)
545 {
546 unsigned int status, tmout = 10000;
547
548 do {
549 status = vt8500_read(port, VT8500_URFIDX);
550
551 if (--tmout == 0)
552 break;
553 udelay(1);
554 } while (status & 0x10);
555
556 vt8500_write(port, c, VT8500_TXFIFO);
557 }
558 #endif
559
560 static const struct uart_ops vt8500_uart_pops = {
561 .tx_empty = vt8500_tx_empty,
562 .set_mctrl = vt8500_set_mctrl,
563 .get_mctrl = vt8500_get_mctrl,
564 .stop_tx = vt8500_stop_tx,
565 .start_tx = vt8500_start_tx,
566 .stop_rx = vt8500_stop_rx,
567 .enable_ms = vt8500_enable_ms,
568 .break_ctl = vt8500_break_ctl,
569 .startup = vt8500_startup,
570 .shutdown = vt8500_shutdown,
571 .set_termios = vt8500_set_termios,
572 .type = vt8500_type,
573 .release_port = vt8500_release_port,
574 .request_port = vt8500_request_port,
575 .config_port = vt8500_config_port,
576 .verify_port = vt8500_verify_port,
577 #ifdef CONFIG_CONSOLE_POLL
578 .poll_get_char = vt8500_get_poll_char,
579 .poll_put_char = vt8500_put_poll_char,
580 #endif
581 };
582
583 static struct uart_driver vt8500_uart_driver = {
584 .owner = THIS_MODULE,
585 .driver_name = "vt8500_serial",
586 .dev_name = "ttyWMT",
587 .nr = 6,
588 .cons = VT8500_CONSOLE,
589 };
590
591 static unsigned int vt8500_flags; /* none required so far */
592 static unsigned int wm8880_flags = VT8500_HAS_SWRTSCTS_SWITCH;
593
594 static const struct of_device_id wmt_dt_ids[] = {
595 { .compatible = "via,vt8500-uart", .data = &vt8500_flags},
596 { .compatible = "wm,wm8880-uart", .data = &wm8880_flags},
597 {}
598 };
599
vt8500_serial_probe(struct platform_device * pdev)600 static int vt8500_serial_probe(struct platform_device *pdev)
601 {
602 struct vt8500_port *vt8500_port;
603 struct resource *mmres;
604 struct device_node *np = pdev->dev.of_node;
605 const unsigned int *flags;
606 int ret;
607 int port;
608 int irq;
609
610 flags = of_device_get_match_data(&pdev->dev);
611 if (!flags)
612 return -EINVAL;
613
614 irq = platform_get_irq(pdev, 0);
615 if (irq < 0)
616 return irq;
617
618 if (np) {
619 port = of_alias_get_id(np, "serial");
620 if (port >= VT8500_MAX_PORTS)
621 port = -1;
622 } else {
623 port = -1;
624 }
625
626 if (port < 0) {
627 /* calculate the port id */
628 port = find_first_zero_bit(vt8500_ports_in_use,
629 VT8500_MAX_PORTS);
630 }
631
632 if (port >= VT8500_MAX_PORTS)
633 return -ENODEV;
634
635 /* reserve the port id */
636 if (test_and_set_bit(port, vt8500_ports_in_use)) {
637 /* port already in use - shouldn't really happen */
638 return -EBUSY;
639 }
640
641 vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port),
642 GFP_KERNEL);
643 if (!vt8500_port)
644 return -ENOMEM;
645
646 vt8500_port->uart.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &mmres);
647 if (IS_ERR(vt8500_port->uart.membase))
648 return PTR_ERR(vt8500_port->uart.membase);
649
650 vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
651 if (IS_ERR(vt8500_port->clk)) {
652 dev_err(&pdev->dev, "failed to get clock\n");
653 return -EINVAL;
654 }
655
656 ret = clk_prepare_enable(vt8500_port->clk);
657 if (ret) {
658 dev_err(&pdev->dev, "failed to enable clock\n");
659 return ret;
660 }
661
662 vt8500_port->vt8500_uart_flags = *flags;
663 vt8500_port->clk_predivisor = DIV_ROUND_CLOSEST(
664 clk_get_rate(vt8500_port->clk),
665 VT8500_RECOMMENDED_CLK
666 );
667 vt8500_port->uart.type = PORT_VT8500;
668 vt8500_port->uart.iotype = UPIO_MEM;
669 vt8500_port->uart.mapbase = mmres->start;
670 vt8500_port->uart.irq = irq;
671 vt8500_port->uart.fifosize = 16;
672 vt8500_port->uart.ops = &vt8500_uart_pops;
673 vt8500_port->uart.line = port;
674 vt8500_port->uart.dev = &pdev->dev;
675 vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
676 vt8500_port->uart.has_sysrq = IS_ENABLED(CONFIG_SERIAL_VT8500_CONSOLE);
677
678 /* Serial core uses the magic "16" everywhere - adjust for it */
679 vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) /
680 vt8500_port->clk_predivisor /
681 VT8500_OVERSAMPLING_DIVISOR;
682
683 snprintf(vt8500_port->name, sizeof(vt8500_port->name),
684 "VT8500 UART%d", pdev->id);
685
686 vt8500_uart_ports[port] = vt8500_port;
687
688 uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
689
690 platform_set_drvdata(pdev, vt8500_port);
691
692 return 0;
693 }
694
695 static struct platform_driver vt8500_platform_driver = {
696 .probe = vt8500_serial_probe,
697 .driver = {
698 .name = "vt8500_serial",
699 .of_match_table = wmt_dt_ids,
700 .suppress_bind_attrs = true,
701 },
702 };
703
vt8500_serial_init(void)704 static int __init vt8500_serial_init(void)
705 {
706 int ret;
707
708 ret = uart_register_driver(&vt8500_uart_driver);
709 if (unlikely(ret))
710 return ret;
711
712 ret = platform_driver_register(&vt8500_platform_driver);
713
714 if (unlikely(ret))
715 uart_unregister_driver(&vt8500_uart_driver);
716
717 return ret;
718 }
719 device_initcall(vt8500_serial_init);
720