1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * timbuart.c timberdale FPGA UART driver 4 * Copyright (c) 2009 Intel Corporation 5 */ 6 7 /* Supports: 8 * Timberdale FPGA UART 9 */ 10 11 #include <linux/pci.h> 12 #include <linux/interrupt.h> 13 #include <linux/serial_core.h> 14 #include <linux/tty.h> 15 #include <linux/tty_flip.h> 16 #include <linux/kernel.h> 17 #include <linux/platform_device.h> 18 #include <linux/ioport.h> 19 #include <linux/slab.h> 20 #include <linux/module.h> 21 22 #include "timbuart.h" 23 24 struct timbuart_port { 25 struct uart_port port; 26 struct tasklet_struct tasklet; 27 int usedma; 28 u32 last_ier; 29 struct platform_device *dev; 30 }; 31 32 static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, 33 921600, 1843200, 3250000}; 34 35 static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); 36 37 static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); 38 39 static void timbuart_stop_rx(struct uart_port *port) 40 { 41 /* spin lock held by upper layer, disable all RX interrupts */ 42 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; 43 iowrite32(ier, port->membase + TIMBUART_IER); 44 } 45 46 static void timbuart_stop_tx(struct uart_port *port) 47 { 48 /* spinlock held by upper layer, disable TX interrupt */ 49 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; 50 iowrite32(ier, port->membase + TIMBUART_IER); 51 } 52 53 static void timbuart_start_tx(struct uart_port *port) 54 { 55 struct timbuart_port *uart = 56 container_of(port, struct timbuart_port, port); 57 58 /* do not transfer anything here -> fire off the tasklet */ 59 tasklet_schedule(&uart->tasklet); 60 } 61 62 static unsigned int timbuart_tx_empty(struct uart_port *port) 63 { 64 u32 isr = ioread32(port->membase + TIMBUART_ISR); 65 66 return (isr & TXBE) ? TIOCSER_TEMT : 0; 67 } 68 69 static void timbuart_flush_buffer(struct uart_port *port) 70 { 71 if (!timbuart_tx_empty(port)) { 72 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | 73 TIMBUART_CTRL_FLSHTX; 74 75 iowrite8(ctl, port->membase + TIMBUART_CTRL); 76 iowrite32(TXBF, port->membase + TIMBUART_ISR); 77 } 78 } 79 80 static void timbuart_rx_chars(struct uart_port *port) 81 { 82 struct tty_port *tport = &port->state->port; 83 84 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { 85 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); 86 port->icount.rx++; 87 tty_insert_flip_char(tport, ch, TTY_NORMAL); 88 } 89 90 spin_unlock(&port->lock); 91 tty_flip_buffer_push(tport); 92 spin_lock(&port->lock); 93 94 dev_dbg(port->dev, "%s - total read %d bytes\n", 95 __func__, port->icount.rx); 96 } 97 98 static void timbuart_tx_chars(struct uart_port *port) 99 { 100 struct circ_buf *xmit = &port->state->xmit; 101 102 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && 103 !uart_circ_empty(xmit)) { 104 iowrite8(xmit->buf[xmit->tail], 105 port->membase + TIMBUART_TXFIFO); 106 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 107 port->icount.tx++; 108 } 109 110 dev_dbg(port->dev, 111 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", 112 __func__, 113 port->icount.tx, 114 ioread8(port->membase + TIMBUART_CTRL), 115 port->mctrl & TIOCM_RTS, 116 ioread8(port->membase + TIMBUART_BAUDRATE)); 117 } 118 119 static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) 120 { 121 struct timbuart_port *uart = 122 container_of(port, struct timbuart_port, port); 123 struct circ_buf *xmit = &port->state->xmit; 124 125 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) 126 return; 127 128 if (port->x_char) 129 return; 130 131 if (isr & TXFLAGS) { 132 timbuart_tx_chars(port); 133 /* clear all TX interrupts */ 134 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); 135 136 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 137 uart_write_wakeup(port); 138 } else 139 /* Re-enable any tx interrupt */ 140 *ier |= uart->last_ier & TXFLAGS; 141 142 /* enable interrupts if there are chars in the transmit buffer, 143 * Or if we delivered some bytes and want the almost empty interrupt 144 * we wake up the upper layer later when we got the interrupt 145 * to give it some time to go out... 146 */ 147 if (!uart_circ_empty(xmit)) 148 *ier |= TXBAE; 149 150 dev_dbg(port->dev, "%s - leaving\n", __func__); 151 } 152 153 static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) 154 { 155 if (isr & RXFLAGS) { 156 /* Some RX status is set */ 157 if (isr & RXBF) { 158 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | 159 TIMBUART_CTRL_FLSHRX; 160 iowrite8(ctl, port->membase + TIMBUART_CTRL); 161 port->icount.overrun++; 162 } else if (isr & (RXDP)) 163 timbuart_rx_chars(port); 164 165 /* ack all RX interrupts */ 166 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); 167 } 168 169 /* always have the RX interrupts enabled */ 170 *ier |= RXBAF | RXBF | RXTT; 171 172 dev_dbg(port->dev, "%s - leaving\n", __func__); 173 } 174 175 static void timbuart_tasklet(struct tasklet_struct *t) 176 { 177 struct timbuart_port *uart = from_tasklet(uart, t, tasklet); 178 u32 isr, ier = 0; 179 180 spin_lock(&uart->port.lock); 181 182 isr = ioread32(uart->port.membase + TIMBUART_ISR); 183 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); 184 185 if (!uart->usedma) 186 timbuart_handle_tx_port(&uart->port, isr, &ier); 187 188 timbuart_mctrl_check(&uart->port, isr, &ier); 189 190 if (!uart->usedma) 191 timbuart_handle_rx_port(&uart->port, isr, &ier); 192 193 iowrite32(ier, uart->port.membase + TIMBUART_IER); 194 195 spin_unlock(&uart->port.lock); 196 dev_dbg(uart->port.dev, "%s leaving\n", __func__); 197 } 198 199 static unsigned int timbuart_get_mctrl(struct uart_port *port) 200 { 201 u8 cts = ioread8(port->membase + TIMBUART_CTRL); 202 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); 203 204 if (cts & TIMBUART_CTRL_CTS) 205 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; 206 else 207 return TIOCM_DSR | TIOCM_CAR; 208 } 209 210 static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) 211 { 212 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); 213 214 if (mctrl & TIOCM_RTS) 215 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); 216 else 217 iowrite8(0, port->membase + TIMBUART_CTRL); 218 } 219 220 static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) 221 { 222 unsigned int cts; 223 224 if (isr & CTS_DELTA) { 225 /* ack */ 226 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); 227 cts = timbuart_get_mctrl(port); 228 uart_handle_cts_change(port, cts & TIOCM_CTS); 229 wake_up_interruptible(&port->state->port.delta_msr_wait); 230 } 231 232 *ier |= CTS_DELTA; 233 } 234 235 static void timbuart_break_ctl(struct uart_port *port, int ctl) 236 { 237 /* N/A */ 238 } 239 240 static int timbuart_startup(struct uart_port *port) 241 { 242 struct timbuart_port *uart = 243 container_of(port, struct timbuart_port, port); 244 245 dev_dbg(port->dev, "%s\n", __func__); 246 247 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); 248 iowrite32(0x1ff, port->membase + TIMBUART_ISR); 249 /* Enable all but TX interrupts */ 250 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, 251 port->membase + TIMBUART_IER); 252 253 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, 254 "timb-uart", uart); 255 } 256 257 static void timbuart_shutdown(struct uart_port *port) 258 { 259 struct timbuart_port *uart = 260 container_of(port, struct timbuart_port, port); 261 dev_dbg(port->dev, "%s\n", __func__); 262 free_irq(port->irq, uart); 263 iowrite32(0, port->membase + TIMBUART_IER); 264 265 timbuart_flush_buffer(port); 266 } 267 268 static int get_bindex(int baud) 269 { 270 int i; 271 272 for (i = 0; i < ARRAY_SIZE(baudrates); i++) 273 if (baud <= baudrates[i]) 274 return i; 275 276 return -1; 277 } 278 279 static void timbuart_set_termios(struct uart_port *port, 280 struct ktermios *termios, 281 struct ktermios *old) 282 { 283 unsigned int baud; 284 short bindex; 285 unsigned long flags; 286 287 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); 288 bindex = get_bindex(baud); 289 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); 290 291 if (bindex < 0) 292 bindex = 0; 293 baud = baudrates[bindex]; 294 295 /* The serial layer calls into this once with old = NULL when setting 296 up initially */ 297 if (old) 298 tty_termios_copy_hw(termios, old); 299 tty_termios_encode_baud_rate(termios, baud, baud); 300 301 spin_lock_irqsave(&port->lock, flags); 302 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); 303 uart_update_timeout(port, termios->c_cflag, baud); 304 spin_unlock_irqrestore(&port->lock, flags); 305 } 306 307 static const char *timbuart_type(struct uart_port *port) 308 { 309 return port->type == PORT_UNKNOWN ? "timbuart" : NULL; 310 } 311 312 /* We do not request/release mappings of the registers here, 313 * currently it's done in the proble function. 314 */ 315 static void timbuart_release_port(struct uart_port *port) 316 { 317 struct platform_device *pdev = to_platform_device(port->dev); 318 int size = 319 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); 320 321 if (port->flags & UPF_IOREMAP) { 322 iounmap(port->membase); 323 port->membase = NULL; 324 } 325 326 release_mem_region(port->mapbase, size); 327 } 328 329 static int timbuart_request_port(struct uart_port *port) 330 { 331 struct platform_device *pdev = to_platform_device(port->dev); 332 int size = 333 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); 334 335 if (!request_mem_region(port->mapbase, size, "timb-uart")) 336 return -EBUSY; 337 338 if (port->flags & UPF_IOREMAP) { 339 port->membase = ioremap(port->mapbase, size); 340 if (port->membase == NULL) { 341 release_mem_region(port->mapbase, size); 342 return -ENOMEM; 343 } 344 } 345 346 return 0; 347 } 348 349 static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) 350 { 351 struct timbuart_port *uart = (struct timbuart_port *)devid; 352 353 if (ioread8(uart->port.membase + TIMBUART_IPR)) { 354 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); 355 356 /* disable interrupts, the tasklet enables them again */ 357 iowrite32(0, uart->port.membase + TIMBUART_IER); 358 359 /* fire off bottom half */ 360 tasklet_schedule(&uart->tasklet); 361 362 return IRQ_HANDLED; 363 } else 364 return IRQ_NONE; 365 } 366 367 /* 368 * Configure/autoconfigure the port. 369 */ 370 static void timbuart_config_port(struct uart_port *port, int flags) 371 { 372 if (flags & UART_CONFIG_TYPE) { 373 port->type = PORT_TIMBUART; 374 timbuart_request_port(port); 375 } 376 } 377 378 static int timbuart_verify_port(struct uart_port *port, 379 struct serial_struct *ser) 380 { 381 /* we don't want the core code to modify any port params */ 382 return -EINVAL; 383 } 384 385 static const struct uart_ops timbuart_ops = { 386 .tx_empty = timbuart_tx_empty, 387 .set_mctrl = timbuart_set_mctrl, 388 .get_mctrl = timbuart_get_mctrl, 389 .stop_tx = timbuart_stop_tx, 390 .start_tx = timbuart_start_tx, 391 .flush_buffer = timbuart_flush_buffer, 392 .stop_rx = timbuart_stop_rx, 393 .break_ctl = timbuart_break_ctl, 394 .startup = timbuart_startup, 395 .shutdown = timbuart_shutdown, 396 .set_termios = timbuart_set_termios, 397 .type = timbuart_type, 398 .release_port = timbuart_release_port, 399 .request_port = timbuart_request_port, 400 .config_port = timbuart_config_port, 401 .verify_port = timbuart_verify_port 402 }; 403 404 static struct uart_driver timbuart_driver = { 405 .owner = THIS_MODULE, 406 .driver_name = "timberdale_uart", 407 .dev_name = "ttyTU", 408 .major = TIMBUART_MAJOR, 409 .minor = TIMBUART_MINOR, 410 .nr = 1 411 }; 412 413 static int timbuart_probe(struct platform_device *dev) 414 { 415 int err, irq; 416 struct timbuart_port *uart; 417 struct resource *iomem; 418 419 dev_dbg(&dev->dev, "%s\n", __func__); 420 421 uart = kzalloc(sizeof(*uart), GFP_KERNEL); 422 if (!uart) { 423 err = -EINVAL; 424 goto err_mem; 425 } 426 427 uart->usedma = 0; 428 429 uart->port.uartclk = 3250000 * 16; 430 uart->port.fifosize = TIMBUART_FIFO_SIZE; 431 uart->port.regshift = 2; 432 uart->port.iotype = UPIO_MEM; 433 uart->port.ops = &timbuart_ops; 434 uart->port.irq = 0; 435 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; 436 uart->port.line = 0; 437 uart->port.dev = &dev->dev; 438 439 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); 440 if (!iomem) { 441 err = -ENOMEM; 442 goto err_register; 443 } 444 uart->port.mapbase = iomem->start; 445 uart->port.membase = NULL; 446 447 irq = platform_get_irq(dev, 0); 448 if (irq < 0) { 449 err = -EINVAL; 450 goto err_register; 451 } 452 uart->port.irq = irq; 453 454 tasklet_setup(&uart->tasklet, timbuart_tasklet); 455 456 err = uart_register_driver(&timbuart_driver); 457 if (err) 458 goto err_register; 459 460 err = uart_add_one_port(&timbuart_driver, &uart->port); 461 if (err) 462 goto err_add_port; 463 464 platform_set_drvdata(dev, uart); 465 466 return 0; 467 468 err_add_port: 469 uart_unregister_driver(&timbuart_driver); 470 err_register: 471 kfree(uart); 472 err_mem: 473 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", 474 err); 475 476 return err; 477 } 478 479 static int timbuart_remove(struct platform_device *dev) 480 { 481 struct timbuart_port *uart = platform_get_drvdata(dev); 482 483 tasklet_kill(&uart->tasklet); 484 uart_remove_one_port(&timbuart_driver, &uart->port); 485 uart_unregister_driver(&timbuart_driver); 486 kfree(uart); 487 488 return 0; 489 } 490 491 static struct platform_driver timbuart_platform_driver = { 492 .driver = { 493 .name = "timb-uart", 494 }, 495 .probe = timbuart_probe, 496 .remove = timbuart_remove, 497 }; 498 499 module_platform_driver(timbuart_platform_driver); 500 501 MODULE_DESCRIPTION("Timberdale UART driver"); 502 MODULE_LICENSE("GPL v2"); 503 MODULE_ALIAS("platform:timb-uart"); 504 505