1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * timbuart.c timberdale FPGA UART driver 4 * Copyright (c) 2009 Intel Corporation 5 */ 6 7 /* Supports: 8 * Timberdale FPGA UART 9 */ 10 11 #include <linux/pci.h> 12 #include <linux/interrupt.h> 13 #include <linux/serial_core.h> 14 #include <linux/tty.h> 15 #include <linux/tty_flip.h> 16 #include <linux/kernel.h> 17 #include <linux/platform_device.h> 18 #include <linux/ioport.h> 19 #include <linux/slab.h> 20 #include <linux/module.h> 21 22 #include "timbuart.h" 23 24 struct timbuart_port { 25 struct uart_port port; 26 struct tasklet_struct tasklet; 27 int usedma; 28 u32 last_ier; 29 struct platform_device *dev; 30 }; 31 32 static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, 33 921600, 1843200, 3250000}; 34 35 static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); 36 37 static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); 38 39 static void timbuart_stop_rx(struct uart_port *port) 40 { 41 /* spin lock held by upper layer, disable all RX interrupts */ 42 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; 43 iowrite32(ier, port->membase + TIMBUART_IER); 44 } 45 46 static void timbuart_stop_tx(struct uart_port *port) 47 { 48 /* spinlock held by upper layer, disable TX interrupt */ 49 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; 50 iowrite32(ier, port->membase + TIMBUART_IER); 51 } 52 53 static void timbuart_start_tx(struct uart_port *port) 54 { 55 struct timbuart_port *uart = 56 container_of(port, struct timbuart_port, port); 57 58 /* do not transfer anything here -> fire off the tasklet */ 59 tasklet_schedule(&uart->tasklet); 60 } 61 62 static unsigned int timbuart_tx_empty(struct uart_port *port) 63 { 64 u32 isr = ioread32(port->membase + TIMBUART_ISR); 65 66 return (isr & TXBE) ? TIOCSER_TEMT : 0; 67 } 68 69 static void timbuart_flush_buffer(struct uart_port *port) 70 { 71 if (!timbuart_tx_empty(port)) { 72 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | 73 TIMBUART_CTRL_FLSHTX; 74 75 iowrite8(ctl, port->membase + TIMBUART_CTRL); 76 iowrite32(TXBF, port->membase + TIMBUART_ISR); 77 } 78 } 79 80 static void timbuart_rx_chars(struct uart_port *port) 81 { 82 struct tty_port *tport = &port->state->port; 83 84 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { 85 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); 86 port->icount.rx++; 87 tty_insert_flip_char(tport, ch, TTY_NORMAL); 88 } 89 90 tty_flip_buffer_push(tport); 91 92 dev_dbg(port->dev, "%s - total read %d bytes\n", 93 __func__, port->icount.rx); 94 } 95 96 static void timbuart_tx_chars(struct uart_port *port) 97 { 98 struct circ_buf *xmit = &port->state->xmit; 99 100 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && 101 !uart_circ_empty(xmit)) { 102 iowrite8(xmit->buf[xmit->tail], 103 port->membase + TIMBUART_TXFIFO); 104 uart_xmit_advance(port, 1); 105 } 106 107 dev_dbg(port->dev, 108 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", 109 __func__, 110 port->icount.tx, 111 ioread8(port->membase + TIMBUART_CTRL), 112 port->mctrl & TIOCM_RTS, 113 ioread8(port->membase + TIMBUART_BAUDRATE)); 114 } 115 116 static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) 117 { 118 struct timbuart_port *uart = 119 container_of(port, struct timbuart_port, port); 120 struct circ_buf *xmit = &port->state->xmit; 121 122 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) 123 return; 124 125 if (port->x_char) 126 return; 127 128 if (isr & TXFLAGS) { 129 timbuart_tx_chars(port); 130 /* clear all TX interrupts */ 131 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); 132 133 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 134 uart_write_wakeup(port); 135 } else 136 /* Re-enable any tx interrupt */ 137 *ier |= uart->last_ier & TXFLAGS; 138 139 /* enable interrupts if there are chars in the transmit buffer, 140 * Or if we delivered some bytes and want the almost empty interrupt 141 * we wake up the upper layer later when we got the interrupt 142 * to give it some time to go out... 143 */ 144 if (!uart_circ_empty(xmit)) 145 *ier |= TXBAE; 146 147 dev_dbg(port->dev, "%s - leaving\n", __func__); 148 } 149 150 static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) 151 { 152 if (isr & RXFLAGS) { 153 /* Some RX status is set */ 154 if (isr & RXBF) { 155 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | 156 TIMBUART_CTRL_FLSHRX; 157 iowrite8(ctl, port->membase + TIMBUART_CTRL); 158 port->icount.overrun++; 159 } else if (isr & (RXDP)) 160 timbuart_rx_chars(port); 161 162 /* ack all RX interrupts */ 163 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); 164 } 165 166 /* always have the RX interrupts enabled */ 167 *ier |= RXBAF | RXBF | RXTT; 168 169 dev_dbg(port->dev, "%s - leaving\n", __func__); 170 } 171 172 static void timbuart_tasklet(struct tasklet_struct *t) 173 { 174 struct timbuart_port *uart = from_tasklet(uart, t, tasklet); 175 u32 isr, ier = 0; 176 177 spin_lock(&uart->port.lock); 178 179 isr = ioread32(uart->port.membase + TIMBUART_ISR); 180 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); 181 182 if (!uart->usedma) 183 timbuart_handle_tx_port(&uart->port, isr, &ier); 184 185 timbuart_mctrl_check(&uart->port, isr, &ier); 186 187 if (!uart->usedma) 188 timbuart_handle_rx_port(&uart->port, isr, &ier); 189 190 iowrite32(ier, uart->port.membase + TIMBUART_IER); 191 192 spin_unlock(&uart->port.lock); 193 dev_dbg(uart->port.dev, "%s leaving\n", __func__); 194 } 195 196 static unsigned int timbuart_get_mctrl(struct uart_port *port) 197 { 198 u8 cts = ioread8(port->membase + TIMBUART_CTRL); 199 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); 200 201 if (cts & TIMBUART_CTRL_CTS) 202 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; 203 else 204 return TIOCM_DSR | TIOCM_CAR; 205 } 206 207 static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) 208 { 209 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); 210 211 if (mctrl & TIOCM_RTS) 212 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); 213 else 214 iowrite8(0, port->membase + TIMBUART_CTRL); 215 } 216 217 static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) 218 { 219 unsigned int cts; 220 221 if (isr & CTS_DELTA) { 222 /* ack */ 223 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); 224 cts = timbuart_get_mctrl(port); 225 uart_handle_cts_change(port, cts & TIOCM_CTS); 226 wake_up_interruptible(&port->state->port.delta_msr_wait); 227 } 228 229 *ier |= CTS_DELTA; 230 } 231 232 static void timbuart_break_ctl(struct uart_port *port, int ctl) 233 { 234 /* N/A */ 235 } 236 237 static int timbuart_startup(struct uart_port *port) 238 { 239 struct timbuart_port *uart = 240 container_of(port, struct timbuart_port, port); 241 242 dev_dbg(port->dev, "%s\n", __func__); 243 244 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); 245 iowrite32(0x1ff, port->membase + TIMBUART_ISR); 246 /* Enable all but TX interrupts */ 247 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, 248 port->membase + TIMBUART_IER); 249 250 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, 251 "timb-uart", uart); 252 } 253 254 static void timbuart_shutdown(struct uart_port *port) 255 { 256 struct timbuart_port *uart = 257 container_of(port, struct timbuart_port, port); 258 dev_dbg(port->dev, "%s\n", __func__); 259 free_irq(port->irq, uart); 260 iowrite32(0, port->membase + TIMBUART_IER); 261 262 timbuart_flush_buffer(port); 263 } 264 265 static int get_bindex(int baud) 266 { 267 int i; 268 269 for (i = 0; i < ARRAY_SIZE(baudrates); i++) 270 if (baud <= baudrates[i]) 271 return i; 272 273 return -1; 274 } 275 276 static void timbuart_set_termios(struct uart_port *port, 277 struct ktermios *termios, 278 const struct ktermios *old) 279 { 280 unsigned int baud; 281 short bindex; 282 unsigned long flags; 283 284 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); 285 bindex = get_bindex(baud); 286 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); 287 288 if (bindex < 0) 289 bindex = 0; 290 baud = baudrates[bindex]; 291 292 /* The serial layer calls into this once with old = NULL when setting 293 up initially */ 294 if (old) 295 tty_termios_copy_hw(termios, old); 296 tty_termios_encode_baud_rate(termios, baud, baud); 297 298 spin_lock_irqsave(&port->lock, flags); 299 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); 300 uart_update_timeout(port, termios->c_cflag, baud); 301 spin_unlock_irqrestore(&port->lock, flags); 302 } 303 304 static const char *timbuart_type(struct uart_port *port) 305 { 306 return port->type == PORT_UNKNOWN ? "timbuart" : NULL; 307 } 308 309 /* We do not request/release mappings of the registers here, 310 * currently it's done in the proble function. 311 */ 312 static void timbuart_release_port(struct uart_port *port) 313 { 314 struct platform_device *pdev = to_platform_device(port->dev); 315 int size = 316 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); 317 318 if (port->flags & UPF_IOREMAP) { 319 iounmap(port->membase); 320 port->membase = NULL; 321 } 322 323 release_mem_region(port->mapbase, size); 324 } 325 326 static int timbuart_request_port(struct uart_port *port) 327 { 328 struct platform_device *pdev = to_platform_device(port->dev); 329 int size = 330 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); 331 332 if (!request_mem_region(port->mapbase, size, "timb-uart")) 333 return -EBUSY; 334 335 if (port->flags & UPF_IOREMAP) { 336 port->membase = ioremap(port->mapbase, size); 337 if (port->membase == NULL) { 338 release_mem_region(port->mapbase, size); 339 return -ENOMEM; 340 } 341 } 342 343 return 0; 344 } 345 346 static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) 347 { 348 struct timbuart_port *uart = (struct timbuart_port *)devid; 349 350 if (ioread8(uart->port.membase + TIMBUART_IPR)) { 351 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); 352 353 /* disable interrupts, the tasklet enables them again */ 354 iowrite32(0, uart->port.membase + TIMBUART_IER); 355 356 /* fire off bottom half */ 357 tasklet_schedule(&uart->tasklet); 358 359 return IRQ_HANDLED; 360 } else 361 return IRQ_NONE; 362 } 363 364 /* 365 * Configure/autoconfigure the port. 366 */ 367 static void timbuart_config_port(struct uart_port *port, int flags) 368 { 369 if (flags & UART_CONFIG_TYPE) { 370 port->type = PORT_TIMBUART; 371 timbuart_request_port(port); 372 } 373 } 374 375 static int timbuart_verify_port(struct uart_port *port, 376 struct serial_struct *ser) 377 { 378 /* we don't want the core code to modify any port params */ 379 return -EINVAL; 380 } 381 382 static const struct uart_ops timbuart_ops = { 383 .tx_empty = timbuart_tx_empty, 384 .set_mctrl = timbuart_set_mctrl, 385 .get_mctrl = timbuart_get_mctrl, 386 .stop_tx = timbuart_stop_tx, 387 .start_tx = timbuart_start_tx, 388 .flush_buffer = timbuart_flush_buffer, 389 .stop_rx = timbuart_stop_rx, 390 .break_ctl = timbuart_break_ctl, 391 .startup = timbuart_startup, 392 .shutdown = timbuart_shutdown, 393 .set_termios = timbuart_set_termios, 394 .type = timbuart_type, 395 .release_port = timbuart_release_port, 396 .request_port = timbuart_request_port, 397 .config_port = timbuart_config_port, 398 .verify_port = timbuart_verify_port 399 }; 400 401 static struct uart_driver timbuart_driver = { 402 .owner = THIS_MODULE, 403 .driver_name = "timberdale_uart", 404 .dev_name = "ttyTU", 405 .major = TIMBUART_MAJOR, 406 .minor = TIMBUART_MINOR, 407 .nr = 1 408 }; 409 410 static int timbuart_probe(struct platform_device *dev) 411 { 412 int err, irq; 413 struct timbuart_port *uart; 414 struct resource *iomem; 415 416 dev_dbg(&dev->dev, "%s\n", __func__); 417 418 uart = kzalloc(sizeof(*uart), GFP_KERNEL); 419 if (!uart) { 420 err = -EINVAL; 421 goto err_mem; 422 } 423 424 uart->usedma = 0; 425 426 uart->port.uartclk = 3250000 * 16; 427 uart->port.fifosize = TIMBUART_FIFO_SIZE; 428 uart->port.regshift = 2; 429 uart->port.iotype = UPIO_MEM; 430 uart->port.ops = &timbuart_ops; 431 uart->port.irq = 0; 432 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; 433 uart->port.line = 0; 434 uart->port.dev = &dev->dev; 435 436 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); 437 if (!iomem) { 438 err = -ENOMEM; 439 goto err_register; 440 } 441 uart->port.mapbase = iomem->start; 442 uart->port.membase = NULL; 443 444 irq = platform_get_irq(dev, 0); 445 if (irq < 0) { 446 err = -EINVAL; 447 goto err_register; 448 } 449 uart->port.irq = irq; 450 451 tasklet_setup(&uart->tasklet, timbuart_tasklet); 452 453 err = uart_register_driver(&timbuart_driver); 454 if (err) 455 goto err_register; 456 457 err = uart_add_one_port(&timbuart_driver, &uart->port); 458 if (err) 459 goto err_add_port; 460 461 platform_set_drvdata(dev, uart); 462 463 return 0; 464 465 err_add_port: 466 uart_unregister_driver(&timbuart_driver); 467 err_register: 468 kfree(uart); 469 err_mem: 470 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", 471 err); 472 473 return err; 474 } 475 476 static int timbuart_remove(struct platform_device *dev) 477 { 478 struct timbuart_port *uart = platform_get_drvdata(dev); 479 480 tasklet_kill(&uart->tasklet); 481 uart_remove_one_port(&timbuart_driver, &uart->port); 482 uart_unregister_driver(&timbuart_driver); 483 kfree(uart); 484 485 return 0; 486 } 487 488 static struct platform_driver timbuart_platform_driver = { 489 .driver = { 490 .name = "timb-uart", 491 }, 492 .probe = timbuart_probe, 493 .remove = timbuart_remove, 494 }; 495 496 module_platform_driver(timbuart_platform_driver); 497 498 MODULE_DESCRIPTION("Timberdale UART driver"); 499 MODULE_LICENSE("GPL v2"); 500 MODULE_ALIAS("platform:timb-uart"); 501 502