xref: /openbmc/linux/drivers/tty/serial/stm32-usart.c (revision 9cfc5c90) 
1 /*
2  * Copyright (C) Maxime Coquelin 2015
3  * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
4  * License terms:  GNU General Public License (GPL), version 2
5  *
6  * Inspired by st-asc.c from STMicroelectronics (c)
7  */
8 
9 #if defined(CONFIG_SERIAL_STM32_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
10 #define SUPPORT_SYSRQ
11 #endif
12 
13 #include <linux/module.h>
14 #include <linux/serial.h>
15 #include <linux/console.h>
16 #include <linux/sysrq.h>
17 #include <linux/platform_device.h>
18 #include <linux/io.h>
19 #include <linux/irq.h>
20 #include <linux/tty.h>
21 #include <linux/tty_flip.h>
22 #include <linux/delay.h>
23 #include <linux/spinlock.h>
24 #include <linux/pm_runtime.h>
25 #include <linux/of.h>
26 #include <linux/of_platform.h>
27 #include <linux/serial_core.h>
28 #include <linux/clk.h>
29 
30 #define DRIVER_NAME "stm32-usart"
31 
32 /* Register offsets */
33 #define USART_SR		0x00
34 #define USART_DR		0x04
35 #define USART_BRR		0x08
36 #define USART_CR1		0x0c
37 #define USART_CR2		0x10
38 #define USART_CR3		0x14
39 #define USART_GTPR		0x18
40 
41 /* USART_SR */
42 #define USART_SR_PE		BIT(0)
43 #define USART_SR_FE		BIT(1)
44 #define USART_SR_NF		BIT(2)
45 #define USART_SR_ORE		BIT(3)
46 #define USART_SR_IDLE		BIT(4)
47 #define USART_SR_RXNE		BIT(5)
48 #define USART_SR_TC		BIT(6)
49 #define USART_SR_TXE		BIT(7)
50 #define USART_SR_LBD		BIT(8)
51 #define USART_SR_CTS		BIT(9)
52 #define USART_SR_ERR_MASK	(USART_SR_LBD | USART_SR_ORE | \
53 				 USART_SR_FE | USART_SR_PE)
54 /* Dummy bits */
55 #define USART_SR_DUMMY_RX	BIT(16)
56 
57 /* USART_DR */
58 #define USART_DR_MASK		GENMASK(8, 0)
59 
60 /* USART_BRR */
61 #define USART_BRR_DIV_F_MASK	GENMASK(3, 0)
62 #define USART_BRR_DIV_M_MASK	GENMASK(15, 4)
63 #define USART_BRR_DIV_M_SHIFT	4
64 
65 /* USART_CR1 */
66 #define USART_CR1_SBK		BIT(0)
67 #define USART_CR1_RWU		BIT(1)
68 #define USART_CR1_RE		BIT(2)
69 #define USART_CR1_TE		BIT(3)
70 #define USART_CR1_IDLEIE	BIT(4)
71 #define USART_CR1_RXNEIE	BIT(5)
72 #define USART_CR1_TCIE		BIT(6)
73 #define USART_CR1_TXEIE		BIT(7)
74 #define USART_CR1_PEIE		BIT(8)
75 #define USART_CR1_PS		BIT(9)
76 #define USART_CR1_PCE		BIT(10)
77 #define USART_CR1_WAKE		BIT(11)
78 #define USART_CR1_M		BIT(12)
79 #define USART_CR1_UE		BIT(13)
80 #define USART_CR1_OVER8		BIT(15)
81 #define USART_CR1_IE_MASK	GENMASK(8, 4)
82 
83 /* USART_CR2 */
84 #define USART_CR2_ADD_MASK	GENMASK(3, 0)
85 #define USART_CR2_LBDL		BIT(5)
86 #define USART_CR2_LBDIE		BIT(6)
87 #define USART_CR2_LBCL		BIT(8)
88 #define USART_CR2_CPHA		BIT(9)
89 #define USART_CR2_CPOL		BIT(10)
90 #define USART_CR2_CLKEN		BIT(11)
91 #define USART_CR2_STOP_2B	BIT(13)
92 #define USART_CR2_STOP_MASK	GENMASK(13, 12)
93 #define USART_CR2_LINEN		BIT(14)
94 
95 /* USART_CR3 */
96 #define USART_CR3_EIE		BIT(0)
97 #define USART_CR3_IREN		BIT(1)
98 #define USART_CR3_IRLP		BIT(2)
99 #define USART_CR3_HDSEL		BIT(3)
100 #define USART_CR3_NACK		BIT(4)
101 #define USART_CR3_SCEN		BIT(5)
102 #define USART_CR3_DMAR		BIT(6)
103 #define USART_CR3_DMAT		BIT(7)
104 #define USART_CR3_RTSE		BIT(8)
105 #define USART_CR3_CTSE		BIT(9)
106 #define USART_CR3_CTSIE		BIT(10)
107 #define USART_CR3_ONEBIT	BIT(11)
108 
109 /* USART_GTPR */
110 #define USART_GTPR_PSC_MASK	GENMASK(7, 0)
111 #define USART_GTPR_GT_MASK	GENMASK(15, 8)
112 
113 #define DRIVER_NAME "stm32-usart"
114 #define STM32_SERIAL_NAME "ttyS"
115 #define STM32_MAX_PORTS 6
116 
117 struct stm32_port {
118 	struct uart_port port;
119 	struct clk *clk;
120 	bool hw_flow_control;
121 };
122 
123 static struct stm32_port stm32_ports[STM32_MAX_PORTS];
124 static struct uart_driver stm32_usart_driver;
125 
126 static void stm32_stop_tx(struct uart_port *port);
127 
128 static inline struct stm32_port *to_stm32_port(struct uart_port *port)
129 {
130 	return container_of(port, struct stm32_port, port);
131 }
132 
133 static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits)
134 {
135 	u32 val;
136 
137 	val = readl_relaxed(port->membase + reg);
138 	val |= bits;
139 	writel_relaxed(val, port->membase + reg);
140 }
141 
142 static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits)
143 {
144 	u32 val;
145 
146 	val = readl_relaxed(port->membase + reg);
147 	val &= ~bits;
148 	writel_relaxed(val, port->membase + reg);
149 }
150 
151 static void stm32_receive_chars(struct uart_port *port)
152 {
153 	struct tty_port *tport = &port->state->port;
154 	unsigned long c;
155 	u32 sr;
156 	char flag;
157 
158 	if (port->irq_wake)
159 		pm_wakeup_event(tport->tty->dev, 0);
160 
161 	while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) {
162 		sr |= USART_SR_DUMMY_RX;
163 		c = readl_relaxed(port->membase + USART_DR);
164 		flag = TTY_NORMAL;
165 		port->icount.rx++;
166 
167 		if (sr & USART_SR_ERR_MASK) {
168 			if (sr & USART_SR_LBD) {
169 				port->icount.brk++;
170 				if (uart_handle_break(port))
171 					continue;
172 			} else if (sr & USART_SR_ORE) {
173 				port->icount.overrun++;
174 			} else if (sr & USART_SR_PE) {
175 				port->icount.parity++;
176 			} else if (sr & USART_SR_FE) {
177 				port->icount.frame++;
178 			}
179 
180 			sr &= port->read_status_mask;
181 
182 			if (sr & USART_SR_LBD)
183 				flag = TTY_BREAK;
184 			else if (sr & USART_SR_PE)
185 				flag = TTY_PARITY;
186 			else if (sr & USART_SR_FE)
187 				flag = TTY_FRAME;
188 		}
189 
190 		if (uart_handle_sysrq_char(port, c))
191 			continue;
192 		uart_insert_char(port, sr, USART_SR_ORE, c, flag);
193 	}
194 
195 	spin_unlock(&port->lock);
196 	tty_flip_buffer_push(tport);
197 	spin_lock(&port->lock);
198 }
199 
200 static void stm32_transmit_chars(struct uart_port *port)
201 {
202 	struct circ_buf *xmit = &port->state->xmit;
203 
204 	if (port->x_char) {
205 		writel_relaxed(port->x_char, port->membase + USART_DR);
206 		port->x_char = 0;
207 		port->icount.tx++;
208 		return;
209 	}
210 
211 	if (uart_tx_stopped(port)) {
212 		stm32_stop_tx(port);
213 		return;
214 	}
215 
216 	if (uart_circ_empty(xmit)) {
217 		stm32_stop_tx(port);
218 		return;
219 	}
220 
221 	writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR);
222 	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
223 	port->icount.tx++;
224 
225 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
226 		uart_write_wakeup(port);
227 
228 	if (uart_circ_empty(xmit))
229 		stm32_stop_tx(port);
230 }
231 
232 static irqreturn_t stm32_interrupt(int irq, void *ptr)
233 {
234 	struct uart_port *port = ptr;
235 	u32 sr;
236 
237 	spin_lock(&port->lock);
238 
239 	sr = readl_relaxed(port->membase + USART_SR);
240 
241 	if (sr & USART_SR_RXNE)
242 		stm32_receive_chars(port);
243 
244 	if (sr & USART_SR_TXE)
245 		stm32_transmit_chars(port);
246 
247 	spin_unlock(&port->lock);
248 
249 	return IRQ_HANDLED;
250 }
251 
252 static unsigned int stm32_tx_empty(struct uart_port *port)
253 {
254 	return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE;
255 }
256 
257 static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
258 {
259 	if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
260 		stm32_set_bits(port, USART_CR3, USART_CR3_RTSE);
261 	else
262 		stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE);
263 }
264 
265 static unsigned int stm32_get_mctrl(struct uart_port *port)
266 {
267 	/* This routine is used to get signals of: DCD, DSR, RI, and CTS */
268 	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
269 }
270 
271 /* Transmit stop */
272 static void stm32_stop_tx(struct uart_port *port)
273 {
274 	stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE);
275 }
276 
277 /* There are probably characters waiting to be transmitted. */
278 static void stm32_start_tx(struct uart_port *port)
279 {
280 	struct circ_buf *xmit = &port->state->xmit;
281 
282 	if (uart_circ_empty(xmit))
283 		return;
284 
285 	stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE);
286 }
287 
288 /* Throttle the remote when input buffer is about to overflow. */
289 static void stm32_throttle(struct uart_port *port)
290 {
291 	unsigned long flags;
292 
293 	spin_lock_irqsave(&port->lock, flags);
294 	stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
295 	spin_unlock_irqrestore(&port->lock, flags);
296 }
297 
298 /* Unthrottle the remote, the input buffer can now accept data. */
299 static void stm32_unthrottle(struct uart_port *port)
300 {
301 	unsigned long flags;
302 
303 	spin_lock_irqsave(&port->lock, flags);
304 	stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE);
305 	spin_unlock_irqrestore(&port->lock, flags);
306 }
307 
308 /* Receive stop */
309 static void stm32_stop_rx(struct uart_port *port)
310 {
311 	stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
312 }
313 
314 /* Handle breaks - ignored by us */
315 static void stm32_break_ctl(struct uart_port *port, int break_state)
316 {
317 }
318 
319 static int stm32_startup(struct uart_port *port)
320 {
321 	const char *name = to_platform_device(port->dev)->name;
322 	u32 val;
323 	int ret;
324 
325 	ret = request_irq(port->irq, stm32_interrupt, 0, name, port);
326 	if (ret)
327 		return ret;
328 
329 	val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
330 	stm32_set_bits(port, USART_CR1, val);
331 
332 	return 0;
333 }
334 
335 static void stm32_shutdown(struct uart_port *port)
336 {
337 	u32 val;
338 
339 	val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
340 	stm32_set_bits(port, USART_CR1, val);
341 
342 	free_irq(port->irq, port);
343 }
344 
345 static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
346 			    struct ktermios *old)
347 {
348 	struct stm32_port *stm32_port = to_stm32_port(port);
349 	unsigned int baud;
350 	u32 usartdiv, mantissa, fraction, oversampling;
351 	tcflag_t cflag = termios->c_cflag;
352 	u32 cr1, cr2, cr3;
353 	unsigned long flags;
354 
355 	if (!stm32_port->hw_flow_control)
356 		cflag &= ~CRTSCTS;
357 
358 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
359 
360 	spin_lock_irqsave(&port->lock, flags);
361 
362 	/* Stop serial port and reset value */
363 	writel_relaxed(0, port->membase + USART_CR1);
364 
365 	cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE;
366 	cr2 = 0;
367 	cr3 = 0;
368 
369 	if (cflag & CSTOPB)
370 		cr2 |= USART_CR2_STOP_2B;
371 
372 	if (cflag & PARENB) {
373 		cr1 |= USART_CR1_PCE;
374 		if ((cflag & CSIZE) == CS8)
375 			cr1 |= USART_CR1_M;
376 	}
377 
378 	if (cflag & PARODD)
379 		cr1 |= USART_CR1_PS;
380 
381 	port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
382 	if (cflag & CRTSCTS) {
383 		port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
384 		cr3 |= USART_CR3_CTSE;
385 	}
386 
387 	usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
388 
389 	/*
390 	 * The USART supports 16 or 8 times oversampling.
391 	 * By default we prefer 16 times oversampling, so that the receiver
392 	 * has a better tolerance to clock deviations.
393 	 * 8 times oversampling is only used to achieve higher speeds.
394 	 */
395 	if (usartdiv < 16) {
396 		oversampling = 8;
397 		stm32_set_bits(port, USART_CR1, USART_CR1_OVER8);
398 	} else {
399 		oversampling = 16;
400 		stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8);
401 	}
402 
403 	mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
404 	fraction = usartdiv % oversampling;
405 	writel_relaxed(mantissa | fraction, port->membase + USART_BRR);
406 
407 	uart_update_timeout(port, cflag, baud);
408 
409 	port->read_status_mask = USART_SR_ORE;
410 	if (termios->c_iflag & INPCK)
411 		port->read_status_mask |= USART_SR_PE | USART_SR_FE;
412 	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
413 		port->read_status_mask |= USART_SR_LBD;
414 
415 	/* Characters to ignore */
416 	port->ignore_status_mask = 0;
417 	if (termios->c_iflag & IGNPAR)
418 		port->ignore_status_mask = USART_SR_PE | USART_SR_FE;
419 	if (termios->c_iflag & IGNBRK) {
420 		port->ignore_status_mask |= USART_SR_LBD;
421 		/*
422 		 * If we're ignoring parity and break indicators,
423 		 * ignore overruns too (for real raw support).
424 		 */
425 		if (termios->c_iflag & IGNPAR)
426 			port->ignore_status_mask |= USART_SR_ORE;
427 	}
428 
429 	/* Ignore all characters if CREAD is not set */
430 	if ((termios->c_cflag & CREAD) == 0)
431 		port->ignore_status_mask |= USART_SR_DUMMY_RX;
432 
433 	writel_relaxed(cr3, port->membase + USART_CR3);
434 	writel_relaxed(cr2, port->membase + USART_CR2);
435 	writel_relaxed(cr1, port->membase + USART_CR1);
436 
437 	spin_unlock_irqrestore(&port->lock, flags);
438 }
439 
440 static const char *stm32_type(struct uart_port *port)
441 {
442 	return (port->type == PORT_STM32) ? DRIVER_NAME : NULL;
443 }
444 
445 static void stm32_release_port(struct uart_port *port)
446 {
447 }
448 
449 static int stm32_request_port(struct uart_port *port)
450 {
451 	return 0;
452 }
453 
454 static void stm32_config_port(struct uart_port *port, int flags)
455 {
456 	if (flags & UART_CONFIG_TYPE)
457 		port->type = PORT_STM32;
458 }
459 
460 static int
461 stm32_verify_port(struct uart_port *port, struct serial_struct *ser)
462 {
463 	/* No user changeable parameters */
464 	return -EINVAL;
465 }
466 
467 static void stm32_pm(struct uart_port *port, unsigned int state,
468 		unsigned int oldstate)
469 {
470 	struct stm32_port *stm32port = container_of(port,
471 			struct stm32_port, port);
472 	unsigned long flags = 0;
473 
474 	switch (state) {
475 	case UART_PM_STATE_ON:
476 		clk_prepare_enable(stm32port->clk);
477 		break;
478 	case UART_PM_STATE_OFF:
479 		spin_lock_irqsave(&port->lock, flags);
480 		stm32_clr_bits(port, USART_CR1, USART_CR1_UE);
481 		spin_unlock_irqrestore(&port->lock, flags);
482 		clk_disable_unprepare(stm32port->clk);
483 		break;
484 	}
485 }
486 
487 static const struct uart_ops stm32_uart_ops = {
488 	.tx_empty	= stm32_tx_empty,
489 	.set_mctrl	= stm32_set_mctrl,
490 	.get_mctrl	= stm32_get_mctrl,
491 	.stop_tx	= stm32_stop_tx,
492 	.start_tx	= stm32_start_tx,
493 	.throttle	= stm32_throttle,
494 	.unthrottle	= stm32_unthrottle,
495 	.stop_rx	= stm32_stop_rx,
496 	.break_ctl	= stm32_break_ctl,
497 	.startup	= stm32_startup,
498 	.shutdown	= stm32_shutdown,
499 	.set_termios	= stm32_set_termios,
500 	.pm		= stm32_pm,
501 	.type		= stm32_type,
502 	.release_port	= stm32_release_port,
503 	.request_port	= stm32_request_port,
504 	.config_port	= stm32_config_port,
505 	.verify_port	= stm32_verify_port,
506 };
507 
508 static int stm32_init_port(struct stm32_port *stm32port,
509 			  struct platform_device *pdev)
510 {
511 	struct uart_port *port = &stm32port->port;
512 	struct resource *res;
513 	int ret;
514 
515 	port->iotype	= UPIO_MEM;
516 	port->flags	= UPF_BOOT_AUTOCONF;
517 	port->ops	= &stm32_uart_ops;
518 	port->dev	= &pdev->dev;
519 	port->irq	= platform_get_irq(pdev, 0);
520 
521 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
522 	port->membase = devm_ioremap_resource(&pdev->dev, res);
523 	if (IS_ERR(port->membase))
524 		return PTR_ERR(port->membase);
525 	port->mapbase = res->start;
526 
527 	spin_lock_init(&port->lock);
528 
529 	stm32port->clk = devm_clk_get(&pdev->dev, NULL);
530 	if (IS_ERR(stm32port->clk))
531 		return PTR_ERR(stm32port->clk);
532 
533 	/* Ensure that clk rate is correct by enabling the clk */
534 	ret = clk_prepare_enable(stm32port->clk);
535 	if (ret)
536 		return ret;
537 
538 	stm32port->port.uartclk = clk_get_rate(stm32port->clk);
539 	if (!stm32port->port.uartclk)
540 		ret = -EINVAL;
541 
542 	clk_disable_unprepare(stm32port->clk);
543 
544 	return ret;
545 }
546 
547 static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
548 {
549 	struct device_node *np = pdev->dev.of_node;
550 	int id;
551 
552 	if (!np)
553 		return NULL;
554 
555 	id = of_alias_get_id(np, "serial");
556 	if (id < 0)
557 		id = 0;
558 
559 	if (WARN_ON(id >= STM32_MAX_PORTS))
560 		return NULL;
561 
562 	stm32_ports[id].hw_flow_control = of_property_read_bool(np,
563 							"auto-flow-control");
564 	stm32_ports[id].port.line = id;
565 	return &stm32_ports[id];
566 }
567 
568 #ifdef CONFIG_OF
569 static const struct of_device_id stm32_match[] = {
570 	{ .compatible = "st,stm32-usart", },
571 	{ .compatible = "st,stm32-uart", },
572 	{},
573 };
574 
575 MODULE_DEVICE_TABLE(of, stm32_match);
576 #endif
577 
578 static int stm32_serial_probe(struct platform_device *pdev)
579 {
580 	int ret;
581 	struct stm32_port *stm32port;
582 
583 	stm32port = stm32_of_get_stm32_port(pdev);
584 	if (!stm32port)
585 		return -ENODEV;
586 
587 	ret = stm32_init_port(stm32port, pdev);
588 	if (ret)
589 		return ret;
590 
591 	ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
592 	if (ret)
593 		return ret;
594 
595 	platform_set_drvdata(pdev, &stm32port->port);
596 
597 	return 0;
598 }
599 
600 static int stm32_serial_remove(struct platform_device *pdev)
601 {
602 	struct uart_port *port = platform_get_drvdata(pdev);
603 
604 	return uart_remove_one_port(&stm32_usart_driver, port);
605 }
606 
607 
608 #ifdef CONFIG_SERIAL_STM32_CONSOLE
609 static void stm32_console_putchar(struct uart_port *port, int ch)
610 {
611 	while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE))
612 		cpu_relax();
613 
614 	writel_relaxed(ch, port->membase + USART_DR);
615 }
616 
617 static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
618 {
619 	struct uart_port *port = &stm32_ports[co->index].port;
620 	unsigned long flags;
621 	u32 old_cr1, new_cr1;
622 	int locked = 1;
623 
624 	local_irq_save(flags);
625 	if (port->sysrq)
626 		locked = 0;
627 	else if (oops_in_progress)
628 		locked = spin_trylock(&port->lock);
629 	else
630 		spin_lock(&port->lock);
631 
632 	/* Save and disable interrupts */
633 	old_cr1 = readl_relaxed(port->membase + USART_CR1);
634 	new_cr1 = old_cr1 & ~USART_CR1_IE_MASK;
635 	writel_relaxed(new_cr1, port->membase + USART_CR1);
636 
637 	uart_console_write(port, s, cnt, stm32_console_putchar);
638 
639 	/* Restore interrupt state */
640 	writel_relaxed(old_cr1, port->membase + USART_CR1);
641 
642 	if (locked)
643 		spin_unlock(&port->lock);
644 	local_irq_restore(flags);
645 }
646 
647 static int stm32_console_setup(struct console *co, char *options)
648 {
649 	struct stm32_port *stm32port;
650 	int baud = 9600;
651 	int bits = 8;
652 	int parity = 'n';
653 	int flow = 'n';
654 
655 	if (co->index >= STM32_MAX_PORTS)
656 		return -ENODEV;
657 
658 	stm32port = &stm32_ports[co->index];
659 
660 	/*
661 	 * This driver does not support early console initialization
662 	 * (use ARM early printk support instead), so we only expect
663 	 * this to be called during the uart port registration when the
664 	 * driver gets probed and the port should be mapped at that point.
665 	 */
666 	if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL)
667 		return -ENXIO;
668 
669 	if (options)
670 		uart_parse_options(options, &baud, &parity, &bits, &flow);
671 
672 	return uart_set_options(&stm32port->port, co, baud, parity, bits, flow);
673 }
674 
675 static struct console stm32_console = {
676 	.name		= STM32_SERIAL_NAME,
677 	.device		= uart_console_device,
678 	.write		= stm32_console_write,
679 	.setup		= stm32_console_setup,
680 	.flags		= CON_PRINTBUFFER,
681 	.index		= -1,
682 	.data		= &stm32_usart_driver,
683 };
684 
685 #define STM32_SERIAL_CONSOLE (&stm32_console)
686 
687 #else
688 #define STM32_SERIAL_CONSOLE NULL
689 #endif /* CONFIG_SERIAL_STM32_CONSOLE */
690 
691 static struct uart_driver stm32_usart_driver = {
692 	.driver_name	= DRIVER_NAME,
693 	.dev_name	= STM32_SERIAL_NAME,
694 	.major		= 0,
695 	.minor		= 0,
696 	.nr		= STM32_MAX_PORTS,
697 	.cons		= STM32_SERIAL_CONSOLE,
698 };
699 
700 static struct platform_driver stm32_serial_driver = {
701 	.probe		= stm32_serial_probe,
702 	.remove		= stm32_serial_remove,
703 	.driver	= {
704 		.name	= DRIVER_NAME,
705 		.of_match_table = of_match_ptr(stm32_match),
706 	},
707 };
708 
709 static int __init usart_init(void)
710 {
711 	static char banner[] __initdata = "STM32 USART driver initialized";
712 	int ret;
713 
714 	pr_info("%s\n", banner);
715 
716 	ret = uart_register_driver(&stm32_usart_driver);
717 	if (ret)
718 		return ret;
719 
720 	ret = platform_driver_register(&stm32_serial_driver);
721 	if (ret)
722 		uart_unregister_driver(&stm32_usart_driver);
723 
724 	return ret;
725 }
726 
727 static void __exit usart_exit(void)
728 {
729 	platform_driver_unregister(&stm32_serial_driver);
730 	uart_unregister_driver(&stm32_usart_driver);
731 }
732 
733 module_init(usart_init);
734 module_exit(usart_exit);
735 
736 MODULE_ALIAS("platform:" DRIVER_NAME);
737 MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver");
738 MODULE_LICENSE("GPL v2");
739