1 /* 2 * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) 3 * 4 * Copyright (C) 2002 - 2011 Paul Mundt 5 * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). 6 * 7 * based off of the old drivers/char/sh-sci.c by: 8 * 9 * Copyright (C) 1999, 2000 Niibe Yutaka 10 * Copyright (C) 2000 Sugioka Toshinobu 11 * Modified to support multiple serial ports. Stuart Menefy (May 2000). 12 * Modified to support SecureEdge. David McCullough (2002) 13 * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). 14 * Removed SH7300 support (Jul 2007). 15 * 16 * This file is subject to the terms and conditions of the GNU General Public 17 * License. See the file "COPYING" in the main directory of this archive 18 * for more details. 19 */ 20 #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 21 #define SUPPORT_SYSRQ 22 #endif 23 24 #undef DEBUG 25 26 #include <linux/clk.h> 27 #include <linux/console.h> 28 #include <linux/ctype.h> 29 #include <linux/cpufreq.h> 30 #include <linux/delay.h> 31 #include <linux/dmaengine.h> 32 #include <linux/dma-mapping.h> 33 #include <linux/err.h> 34 #include <linux/errno.h> 35 #include <linux/gpio.h> 36 #include <linux/init.h> 37 #include <linux/interrupt.h> 38 #include <linux/ioport.h> 39 #include <linux/major.h> 40 #include <linux/module.h> 41 #include <linux/mm.h> 42 #include <linux/notifier.h> 43 #include <linux/platform_device.h> 44 #include <linux/pm_runtime.h> 45 #include <linux/scatterlist.h> 46 #include <linux/serial.h> 47 #include <linux/serial_sci.h> 48 #include <linux/sh_dma.h> 49 #include <linux/slab.h> 50 #include <linux/string.h> 51 #include <linux/sysrq.h> 52 #include <linux/timer.h> 53 #include <linux/tty.h> 54 #include <linux/tty_flip.h> 55 56 #ifdef CONFIG_SUPERH 57 #include <asm/sh_bios.h> 58 #endif 59 60 #include "sh-sci.h" 61 62 struct sci_port { 63 struct uart_port port; 64 65 /* Platform configuration */ 66 struct plat_sci_port *cfg; 67 68 /* Break timer */ 69 struct timer_list break_timer; 70 int break_flag; 71 72 /* Interface clock */ 73 struct clk *iclk; 74 /* Function clock */ 75 struct clk *fclk; 76 77 char *irqstr[SCIx_NR_IRQS]; 78 char *gpiostr[SCIx_NR_FNS]; 79 80 struct dma_chan *chan_tx; 81 struct dma_chan *chan_rx; 82 83 #ifdef CONFIG_SERIAL_SH_SCI_DMA 84 struct dma_async_tx_descriptor *desc_tx; 85 struct dma_async_tx_descriptor *desc_rx[2]; 86 dma_cookie_t cookie_tx; 87 dma_cookie_t cookie_rx[2]; 88 dma_cookie_t active_rx; 89 struct scatterlist sg_tx; 90 unsigned int sg_len_tx; 91 struct scatterlist sg_rx[2]; 92 size_t buf_len_rx; 93 struct sh_dmae_slave param_tx; 94 struct sh_dmae_slave param_rx; 95 struct work_struct work_tx; 96 struct work_struct work_rx; 97 struct timer_list rx_timer; 98 unsigned int rx_timeout; 99 #endif 100 101 struct notifier_block freq_transition; 102 }; 103 104 /* Function prototypes */ 105 static void sci_start_tx(struct uart_port *port); 106 static void sci_stop_tx(struct uart_port *port); 107 static void sci_start_rx(struct uart_port *port); 108 109 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS 110 111 static struct sci_port sci_ports[SCI_NPORTS]; 112 static struct uart_driver sci_uart_driver; 113 114 static inline struct sci_port * 115 to_sci_port(struct uart_port *uart) 116 { 117 return container_of(uart, struct sci_port, port); 118 } 119 120 struct plat_sci_reg { 121 u8 offset, size; 122 }; 123 124 /* Helper for invalidating specific entries of an inherited map. */ 125 #define sci_reg_invalid { .offset = 0, .size = 0 } 126 127 static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { 128 [SCIx_PROBE_REGTYPE] = { 129 [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, 130 }, 131 132 /* 133 * Common SCI definitions, dependent on the port's regshift 134 * value. 135 */ 136 [SCIx_SCI_REGTYPE] = { 137 [SCSMR] = { 0x00, 8 }, 138 [SCBRR] = { 0x01, 8 }, 139 [SCSCR] = { 0x02, 8 }, 140 [SCxTDR] = { 0x03, 8 }, 141 [SCxSR] = { 0x04, 8 }, 142 [SCxRDR] = { 0x05, 8 }, 143 [SCFCR] = sci_reg_invalid, 144 [SCFDR] = sci_reg_invalid, 145 [SCTFDR] = sci_reg_invalid, 146 [SCRFDR] = sci_reg_invalid, 147 [SCSPTR] = sci_reg_invalid, 148 [SCLSR] = sci_reg_invalid, 149 [HSSRR] = sci_reg_invalid, 150 }, 151 152 /* 153 * Common definitions for legacy IrDA ports, dependent on 154 * regshift value. 155 */ 156 [SCIx_IRDA_REGTYPE] = { 157 [SCSMR] = { 0x00, 8 }, 158 [SCBRR] = { 0x01, 8 }, 159 [SCSCR] = { 0x02, 8 }, 160 [SCxTDR] = { 0x03, 8 }, 161 [SCxSR] = { 0x04, 8 }, 162 [SCxRDR] = { 0x05, 8 }, 163 [SCFCR] = { 0x06, 8 }, 164 [SCFDR] = { 0x07, 16 }, 165 [SCTFDR] = sci_reg_invalid, 166 [SCRFDR] = sci_reg_invalid, 167 [SCSPTR] = sci_reg_invalid, 168 [SCLSR] = sci_reg_invalid, 169 [HSSRR] = sci_reg_invalid, 170 }, 171 172 /* 173 * Common SCIFA definitions. 174 */ 175 [SCIx_SCIFA_REGTYPE] = { 176 [SCSMR] = { 0x00, 16 }, 177 [SCBRR] = { 0x04, 8 }, 178 [SCSCR] = { 0x08, 16 }, 179 [SCxTDR] = { 0x20, 8 }, 180 [SCxSR] = { 0x14, 16 }, 181 [SCxRDR] = { 0x24, 8 }, 182 [SCFCR] = { 0x18, 16 }, 183 [SCFDR] = { 0x1c, 16 }, 184 [SCTFDR] = sci_reg_invalid, 185 [SCRFDR] = sci_reg_invalid, 186 [SCSPTR] = sci_reg_invalid, 187 [SCLSR] = sci_reg_invalid, 188 [HSSRR] = sci_reg_invalid, 189 }, 190 191 /* 192 * Common SCIFB definitions. 193 */ 194 [SCIx_SCIFB_REGTYPE] = { 195 [SCSMR] = { 0x00, 16 }, 196 [SCBRR] = { 0x04, 8 }, 197 [SCSCR] = { 0x08, 16 }, 198 [SCxTDR] = { 0x40, 8 }, 199 [SCxSR] = { 0x14, 16 }, 200 [SCxRDR] = { 0x60, 8 }, 201 [SCFCR] = { 0x18, 16 }, 202 [SCFDR] = sci_reg_invalid, 203 [SCTFDR] = { 0x38, 16 }, 204 [SCRFDR] = { 0x3c, 16 }, 205 [SCSPTR] = sci_reg_invalid, 206 [SCLSR] = sci_reg_invalid, 207 [HSSRR] = sci_reg_invalid, 208 }, 209 210 /* 211 * Common SH-2(A) SCIF definitions for ports with FIFO data 212 * count registers. 213 */ 214 [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { 215 [SCSMR] = { 0x00, 16 }, 216 [SCBRR] = { 0x04, 8 }, 217 [SCSCR] = { 0x08, 16 }, 218 [SCxTDR] = { 0x0c, 8 }, 219 [SCxSR] = { 0x10, 16 }, 220 [SCxRDR] = { 0x14, 8 }, 221 [SCFCR] = { 0x18, 16 }, 222 [SCFDR] = { 0x1c, 16 }, 223 [SCTFDR] = sci_reg_invalid, 224 [SCRFDR] = sci_reg_invalid, 225 [SCSPTR] = { 0x20, 16 }, 226 [SCLSR] = { 0x24, 16 }, 227 [HSSRR] = sci_reg_invalid, 228 }, 229 230 /* 231 * Common SH-3 SCIF definitions. 232 */ 233 [SCIx_SH3_SCIF_REGTYPE] = { 234 [SCSMR] = { 0x00, 8 }, 235 [SCBRR] = { 0x02, 8 }, 236 [SCSCR] = { 0x04, 8 }, 237 [SCxTDR] = { 0x06, 8 }, 238 [SCxSR] = { 0x08, 16 }, 239 [SCxRDR] = { 0x0a, 8 }, 240 [SCFCR] = { 0x0c, 8 }, 241 [SCFDR] = { 0x0e, 16 }, 242 [SCTFDR] = sci_reg_invalid, 243 [SCRFDR] = sci_reg_invalid, 244 [SCSPTR] = sci_reg_invalid, 245 [SCLSR] = sci_reg_invalid, 246 [HSSRR] = sci_reg_invalid, 247 }, 248 249 /* 250 * Common SH-4(A) SCIF(B) definitions. 251 */ 252 [SCIx_SH4_SCIF_REGTYPE] = { 253 [SCSMR] = { 0x00, 16 }, 254 [SCBRR] = { 0x04, 8 }, 255 [SCSCR] = { 0x08, 16 }, 256 [SCxTDR] = { 0x0c, 8 }, 257 [SCxSR] = { 0x10, 16 }, 258 [SCxRDR] = { 0x14, 8 }, 259 [SCFCR] = { 0x18, 16 }, 260 [SCFDR] = { 0x1c, 16 }, 261 [SCTFDR] = sci_reg_invalid, 262 [SCRFDR] = sci_reg_invalid, 263 [SCSPTR] = { 0x20, 16 }, 264 [SCLSR] = { 0x24, 16 }, 265 [HSSRR] = sci_reg_invalid, 266 }, 267 268 /* 269 * Common HSCIF definitions. 270 */ 271 [SCIx_HSCIF_REGTYPE] = { 272 [SCSMR] = { 0x00, 16 }, 273 [SCBRR] = { 0x04, 8 }, 274 [SCSCR] = { 0x08, 16 }, 275 [SCxTDR] = { 0x0c, 8 }, 276 [SCxSR] = { 0x10, 16 }, 277 [SCxRDR] = { 0x14, 8 }, 278 [SCFCR] = { 0x18, 16 }, 279 [SCFDR] = { 0x1c, 16 }, 280 [SCTFDR] = sci_reg_invalid, 281 [SCRFDR] = sci_reg_invalid, 282 [SCSPTR] = { 0x20, 16 }, 283 [SCLSR] = { 0x24, 16 }, 284 [HSSRR] = { 0x40, 16 }, 285 }, 286 287 /* 288 * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR 289 * register. 290 */ 291 [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { 292 [SCSMR] = { 0x00, 16 }, 293 [SCBRR] = { 0x04, 8 }, 294 [SCSCR] = { 0x08, 16 }, 295 [SCxTDR] = { 0x0c, 8 }, 296 [SCxSR] = { 0x10, 16 }, 297 [SCxRDR] = { 0x14, 8 }, 298 [SCFCR] = { 0x18, 16 }, 299 [SCFDR] = { 0x1c, 16 }, 300 [SCTFDR] = sci_reg_invalid, 301 [SCRFDR] = sci_reg_invalid, 302 [SCSPTR] = sci_reg_invalid, 303 [SCLSR] = { 0x24, 16 }, 304 [HSSRR] = sci_reg_invalid, 305 }, 306 307 /* 308 * Common SH-4(A) SCIF(B) definitions for ports with FIFO data 309 * count registers. 310 */ 311 [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { 312 [SCSMR] = { 0x00, 16 }, 313 [SCBRR] = { 0x04, 8 }, 314 [SCSCR] = { 0x08, 16 }, 315 [SCxTDR] = { 0x0c, 8 }, 316 [SCxSR] = { 0x10, 16 }, 317 [SCxRDR] = { 0x14, 8 }, 318 [SCFCR] = { 0x18, 16 }, 319 [SCFDR] = { 0x1c, 16 }, 320 [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ 321 [SCRFDR] = { 0x20, 16 }, 322 [SCSPTR] = { 0x24, 16 }, 323 [SCLSR] = { 0x28, 16 }, 324 [HSSRR] = sci_reg_invalid, 325 }, 326 327 /* 328 * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR 329 * registers. 330 */ 331 [SCIx_SH7705_SCIF_REGTYPE] = { 332 [SCSMR] = { 0x00, 16 }, 333 [SCBRR] = { 0x04, 8 }, 334 [SCSCR] = { 0x08, 16 }, 335 [SCxTDR] = { 0x20, 8 }, 336 [SCxSR] = { 0x14, 16 }, 337 [SCxRDR] = { 0x24, 8 }, 338 [SCFCR] = { 0x18, 16 }, 339 [SCFDR] = { 0x1c, 16 }, 340 [SCTFDR] = sci_reg_invalid, 341 [SCRFDR] = sci_reg_invalid, 342 [SCSPTR] = sci_reg_invalid, 343 [SCLSR] = sci_reg_invalid, 344 [HSSRR] = sci_reg_invalid, 345 }, 346 }; 347 348 #define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) 349 350 /* 351 * The "offset" here is rather misleading, in that it refers to an enum 352 * value relative to the port mapping rather than the fixed offset 353 * itself, which needs to be manually retrieved from the platform's 354 * register map for the given port. 355 */ 356 static unsigned int sci_serial_in(struct uart_port *p, int offset) 357 { 358 struct plat_sci_reg *reg = sci_getreg(p, offset); 359 360 if (reg->size == 8) 361 return ioread8(p->membase + (reg->offset << p->regshift)); 362 else if (reg->size == 16) 363 return ioread16(p->membase + (reg->offset << p->regshift)); 364 else 365 WARN(1, "Invalid register access\n"); 366 367 return 0; 368 } 369 370 static void sci_serial_out(struct uart_port *p, int offset, int value) 371 { 372 struct plat_sci_reg *reg = sci_getreg(p, offset); 373 374 if (reg->size == 8) 375 iowrite8(value, p->membase + (reg->offset << p->regshift)); 376 else if (reg->size == 16) 377 iowrite16(value, p->membase + (reg->offset << p->regshift)); 378 else 379 WARN(1, "Invalid register access\n"); 380 } 381 382 static int sci_probe_regmap(struct plat_sci_port *cfg) 383 { 384 switch (cfg->type) { 385 case PORT_SCI: 386 cfg->regtype = SCIx_SCI_REGTYPE; 387 break; 388 case PORT_IRDA: 389 cfg->regtype = SCIx_IRDA_REGTYPE; 390 break; 391 case PORT_SCIFA: 392 cfg->regtype = SCIx_SCIFA_REGTYPE; 393 break; 394 case PORT_SCIFB: 395 cfg->regtype = SCIx_SCIFB_REGTYPE; 396 break; 397 case PORT_SCIF: 398 /* 399 * The SH-4 is a bit of a misnomer here, although that's 400 * where this particular port layout originated. This 401 * configuration (or some slight variation thereof) 402 * remains the dominant model for all SCIFs. 403 */ 404 cfg->regtype = SCIx_SH4_SCIF_REGTYPE; 405 break; 406 case PORT_HSCIF: 407 cfg->regtype = SCIx_HSCIF_REGTYPE; 408 break; 409 default: 410 printk(KERN_ERR "Can't probe register map for given port\n"); 411 return -EINVAL; 412 } 413 414 return 0; 415 } 416 417 static void sci_port_enable(struct sci_port *sci_port) 418 { 419 if (!sci_port->port.dev) 420 return; 421 422 pm_runtime_get_sync(sci_port->port.dev); 423 424 clk_prepare_enable(sci_port->iclk); 425 sci_port->port.uartclk = clk_get_rate(sci_port->iclk); 426 clk_prepare_enable(sci_port->fclk); 427 } 428 429 static void sci_port_disable(struct sci_port *sci_port) 430 { 431 if (!sci_port->port.dev) 432 return; 433 434 /* Cancel the break timer to ensure that the timer handler will not try 435 * to access the hardware with clocks and power disabled. Reset the 436 * break flag to make the break debouncing state machine ready for the 437 * next break. 438 */ 439 del_timer_sync(&sci_port->break_timer); 440 sci_port->break_flag = 0; 441 442 clk_disable_unprepare(sci_port->fclk); 443 clk_disable_unprepare(sci_port->iclk); 444 445 pm_runtime_put_sync(sci_port->port.dev); 446 } 447 448 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) 449 450 #ifdef CONFIG_CONSOLE_POLL 451 static int sci_poll_get_char(struct uart_port *port) 452 { 453 unsigned short status; 454 int c; 455 456 do { 457 status = serial_port_in(port, SCxSR); 458 if (status & SCxSR_ERRORS(port)) { 459 serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); 460 continue; 461 } 462 break; 463 } while (1); 464 465 if (!(status & SCxSR_RDxF(port))) 466 return NO_POLL_CHAR; 467 468 c = serial_port_in(port, SCxRDR); 469 470 /* Dummy read */ 471 serial_port_in(port, SCxSR); 472 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); 473 474 return c; 475 } 476 #endif 477 478 static void sci_poll_put_char(struct uart_port *port, unsigned char c) 479 { 480 unsigned short status; 481 482 do { 483 status = serial_port_in(port, SCxSR); 484 } while (!(status & SCxSR_TDxE(port))); 485 486 serial_port_out(port, SCxTDR, c); 487 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); 488 } 489 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ 490 491 static void sci_init_pins(struct uart_port *port, unsigned int cflag) 492 { 493 struct sci_port *s = to_sci_port(port); 494 struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; 495 496 /* 497 * Use port-specific handler if provided. 498 */ 499 if (s->cfg->ops && s->cfg->ops->init_pins) { 500 s->cfg->ops->init_pins(port, cflag); 501 return; 502 } 503 504 /* 505 * For the generic path SCSPTR is necessary. Bail out if that's 506 * unavailable, too. 507 */ 508 if (!reg->size) 509 return; 510 511 if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) && 512 ((!(cflag & CRTSCTS)))) { 513 unsigned short status; 514 515 status = serial_port_in(port, SCSPTR); 516 status &= ~SCSPTR_CTSIO; 517 status |= SCSPTR_RTSIO; 518 serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */ 519 } 520 } 521 522 static int sci_txfill(struct uart_port *port) 523 { 524 struct plat_sci_reg *reg; 525 526 reg = sci_getreg(port, SCTFDR); 527 if (reg->size) 528 return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1); 529 530 reg = sci_getreg(port, SCFDR); 531 if (reg->size) 532 return serial_port_in(port, SCFDR) >> 8; 533 534 return !(serial_port_in(port, SCxSR) & SCI_TDRE); 535 } 536 537 static int sci_txroom(struct uart_port *port) 538 { 539 return port->fifosize - sci_txfill(port); 540 } 541 542 static int sci_rxfill(struct uart_port *port) 543 { 544 struct plat_sci_reg *reg; 545 546 reg = sci_getreg(port, SCRFDR); 547 if (reg->size) 548 return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1); 549 550 reg = sci_getreg(port, SCFDR); 551 if (reg->size) 552 return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1); 553 554 return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; 555 } 556 557 /* 558 * SCI helper for checking the state of the muxed port/RXD pins. 559 */ 560 static inline int sci_rxd_in(struct uart_port *port) 561 { 562 struct sci_port *s = to_sci_port(port); 563 564 if (s->cfg->port_reg <= 0) 565 return 1; 566 567 /* Cast for ARM damage */ 568 return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg); 569 } 570 571 /* ********************************************************************** * 572 * the interrupt related routines * 573 * ********************************************************************** */ 574 575 static void sci_transmit_chars(struct uart_port *port) 576 { 577 struct circ_buf *xmit = &port->state->xmit; 578 unsigned int stopped = uart_tx_stopped(port); 579 unsigned short status; 580 unsigned short ctrl; 581 int count; 582 583 status = serial_port_in(port, SCxSR); 584 if (!(status & SCxSR_TDxE(port))) { 585 ctrl = serial_port_in(port, SCSCR); 586 if (uart_circ_empty(xmit)) 587 ctrl &= ~SCSCR_TIE; 588 else 589 ctrl |= SCSCR_TIE; 590 serial_port_out(port, SCSCR, ctrl); 591 return; 592 } 593 594 count = sci_txroom(port); 595 596 do { 597 unsigned char c; 598 599 if (port->x_char) { 600 c = port->x_char; 601 port->x_char = 0; 602 } else if (!uart_circ_empty(xmit) && !stopped) { 603 c = xmit->buf[xmit->tail]; 604 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 605 } else { 606 break; 607 } 608 609 serial_port_out(port, SCxTDR, c); 610 611 port->icount.tx++; 612 } while (--count > 0); 613 614 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); 615 616 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 617 uart_write_wakeup(port); 618 if (uart_circ_empty(xmit)) { 619 sci_stop_tx(port); 620 } else { 621 ctrl = serial_port_in(port, SCSCR); 622 623 if (port->type != PORT_SCI) { 624 serial_port_in(port, SCxSR); /* Dummy read */ 625 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); 626 } 627 628 ctrl |= SCSCR_TIE; 629 serial_port_out(port, SCSCR, ctrl); 630 } 631 } 632 633 /* On SH3, SCIF may read end-of-break as a space->mark char */ 634 #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) 635 636 static void sci_receive_chars(struct uart_port *port) 637 { 638 struct sci_port *sci_port = to_sci_port(port); 639 struct tty_port *tport = &port->state->port; 640 int i, count, copied = 0; 641 unsigned short status; 642 unsigned char flag; 643 644 status = serial_port_in(port, SCxSR); 645 if (!(status & SCxSR_RDxF(port))) 646 return; 647 648 while (1) { 649 /* Don't copy more bytes than there is room for in the buffer */ 650 count = tty_buffer_request_room(tport, sci_rxfill(port)); 651 652 /* If for any reason we can't copy more data, we're done! */ 653 if (count == 0) 654 break; 655 656 if (port->type == PORT_SCI) { 657 char c = serial_port_in(port, SCxRDR); 658 if (uart_handle_sysrq_char(port, c) || 659 sci_port->break_flag) 660 count = 0; 661 else 662 tty_insert_flip_char(tport, c, TTY_NORMAL); 663 } else { 664 for (i = 0; i < count; i++) { 665 char c = serial_port_in(port, SCxRDR); 666 667 status = serial_port_in(port, SCxSR); 668 #if defined(CONFIG_CPU_SH3) 669 /* Skip "chars" during break */ 670 if (sci_port->break_flag) { 671 if ((c == 0) && 672 (status & SCxSR_FER(port))) { 673 count--; i--; 674 continue; 675 } 676 677 /* Nonzero => end-of-break */ 678 dev_dbg(port->dev, "debounce<%02x>\n", c); 679 sci_port->break_flag = 0; 680 681 if (STEPFN(c)) { 682 count--; i--; 683 continue; 684 } 685 } 686 #endif /* CONFIG_CPU_SH3 */ 687 if (uart_handle_sysrq_char(port, c)) { 688 count--; i--; 689 continue; 690 } 691 692 /* Store data and status */ 693 if (status & SCxSR_FER(port)) { 694 flag = TTY_FRAME; 695 port->icount.frame++; 696 dev_notice(port->dev, "frame error\n"); 697 } else if (status & SCxSR_PER(port)) { 698 flag = TTY_PARITY; 699 port->icount.parity++; 700 dev_notice(port->dev, "parity error\n"); 701 } else 702 flag = TTY_NORMAL; 703 704 tty_insert_flip_char(tport, c, flag); 705 } 706 } 707 708 serial_port_in(port, SCxSR); /* dummy read */ 709 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); 710 711 copied += count; 712 port->icount.rx += count; 713 } 714 715 if (copied) { 716 /* Tell the rest of the system the news. New characters! */ 717 tty_flip_buffer_push(tport); 718 } else { 719 serial_port_in(port, SCxSR); /* dummy read */ 720 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); 721 } 722 } 723 724 #define SCI_BREAK_JIFFIES (HZ/20) 725 726 /* 727 * The sci generates interrupts during the break, 728 * 1 per millisecond or so during the break period, for 9600 baud. 729 * So dont bother disabling interrupts. 730 * But dont want more than 1 break event. 731 * Use a kernel timer to periodically poll the rx line until 732 * the break is finished. 733 */ 734 static inline void sci_schedule_break_timer(struct sci_port *port) 735 { 736 mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES); 737 } 738 739 /* Ensure that two consecutive samples find the break over. */ 740 static void sci_break_timer(unsigned long data) 741 { 742 struct sci_port *port = (struct sci_port *)data; 743 744 if (sci_rxd_in(&port->port) == 0) { 745 port->break_flag = 1; 746 sci_schedule_break_timer(port); 747 } else if (port->break_flag == 1) { 748 /* break is over. */ 749 port->break_flag = 2; 750 sci_schedule_break_timer(port); 751 } else 752 port->break_flag = 0; 753 } 754 755 static int sci_handle_errors(struct uart_port *port) 756 { 757 int copied = 0; 758 unsigned short status = serial_port_in(port, SCxSR); 759 struct tty_port *tport = &port->state->port; 760 struct sci_port *s = to_sci_port(port); 761 762 /* 763 * Handle overruns, if supported. 764 */ 765 if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { 766 if (status & (1 << s->cfg->overrun_bit)) { 767 port->icount.overrun++; 768 769 /* overrun error */ 770 if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) 771 copied++; 772 773 dev_notice(port->dev, "overrun error"); 774 } 775 } 776 777 if (status & SCxSR_FER(port)) { 778 if (sci_rxd_in(port) == 0) { 779 /* Notify of BREAK */ 780 struct sci_port *sci_port = to_sci_port(port); 781 782 if (!sci_port->break_flag) { 783 port->icount.brk++; 784 785 sci_port->break_flag = 1; 786 sci_schedule_break_timer(sci_port); 787 788 /* Do sysrq handling. */ 789 if (uart_handle_break(port)) 790 return 0; 791 792 dev_dbg(port->dev, "BREAK detected\n"); 793 794 if (tty_insert_flip_char(tport, 0, TTY_BREAK)) 795 copied++; 796 } 797 798 } else { 799 /* frame error */ 800 port->icount.frame++; 801 802 if (tty_insert_flip_char(tport, 0, TTY_FRAME)) 803 copied++; 804 805 dev_notice(port->dev, "frame error\n"); 806 } 807 } 808 809 if (status & SCxSR_PER(port)) { 810 /* parity error */ 811 port->icount.parity++; 812 813 if (tty_insert_flip_char(tport, 0, TTY_PARITY)) 814 copied++; 815 816 dev_notice(port->dev, "parity error"); 817 } 818 819 if (copied) 820 tty_flip_buffer_push(tport); 821 822 return copied; 823 } 824 825 static int sci_handle_fifo_overrun(struct uart_port *port) 826 { 827 struct tty_port *tport = &port->state->port; 828 struct sci_port *s = to_sci_port(port); 829 struct plat_sci_reg *reg; 830 int copied = 0; 831 832 reg = sci_getreg(port, SCLSR); 833 if (!reg->size) 834 return 0; 835 836 if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { 837 serial_port_out(port, SCLSR, 0); 838 839 port->icount.overrun++; 840 841 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 842 tty_flip_buffer_push(tport); 843 844 dev_notice(port->dev, "overrun error\n"); 845 copied++; 846 } 847 848 return copied; 849 } 850 851 static int sci_handle_breaks(struct uart_port *port) 852 { 853 int copied = 0; 854 unsigned short status = serial_port_in(port, SCxSR); 855 struct tty_port *tport = &port->state->port; 856 struct sci_port *s = to_sci_port(port); 857 858 if (uart_handle_break(port)) 859 return 0; 860 861 if (!s->break_flag && status & SCxSR_BRK(port)) { 862 #if defined(CONFIG_CPU_SH3) 863 /* Debounce break */ 864 s->break_flag = 1; 865 #endif 866 867 port->icount.brk++; 868 869 /* Notify of BREAK */ 870 if (tty_insert_flip_char(tport, 0, TTY_BREAK)) 871 copied++; 872 873 dev_dbg(port->dev, "BREAK detected\n"); 874 } 875 876 if (copied) 877 tty_flip_buffer_push(tport); 878 879 copied += sci_handle_fifo_overrun(port); 880 881 return copied; 882 } 883 884 static irqreturn_t sci_rx_interrupt(int irq, void *ptr) 885 { 886 #ifdef CONFIG_SERIAL_SH_SCI_DMA 887 struct uart_port *port = ptr; 888 struct sci_port *s = to_sci_port(port); 889 890 if (s->chan_rx) { 891 u16 scr = serial_port_in(port, SCSCR); 892 u16 ssr = serial_port_in(port, SCxSR); 893 894 /* Disable future Rx interrupts */ 895 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { 896 disable_irq_nosync(irq); 897 scr |= 0x4000; 898 } else { 899 scr &= ~SCSCR_RIE; 900 } 901 serial_port_out(port, SCSCR, scr); 902 /* Clear current interrupt */ 903 serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); 904 dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", 905 jiffies, s->rx_timeout); 906 mod_timer(&s->rx_timer, jiffies + s->rx_timeout); 907 908 return IRQ_HANDLED; 909 } 910 #endif 911 912 /* I think sci_receive_chars has to be called irrespective 913 * of whether the I_IXOFF is set, otherwise, how is the interrupt 914 * to be disabled? 915 */ 916 sci_receive_chars(ptr); 917 918 return IRQ_HANDLED; 919 } 920 921 static irqreturn_t sci_tx_interrupt(int irq, void *ptr) 922 { 923 struct uart_port *port = ptr; 924 unsigned long flags; 925 926 spin_lock_irqsave(&port->lock, flags); 927 sci_transmit_chars(port); 928 spin_unlock_irqrestore(&port->lock, flags); 929 930 return IRQ_HANDLED; 931 } 932 933 static irqreturn_t sci_er_interrupt(int irq, void *ptr) 934 { 935 struct uart_port *port = ptr; 936 937 /* Handle errors */ 938 if (port->type == PORT_SCI) { 939 if (sci_handle_errors(port)) { 940 /* discard character in rx buffer */ 941 serial_port_in(port, SCxSR); 942 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); 943 } 944 } else { 945 sci_handle_fifo_overrun(port); 946 sci_rx_interrupt(irq, ptr); 947 } 948 949 serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); 950 951 /* Kick the transmission */ 952 sci_tx_interrupt(irq, ptr); 953 954 return IRQ_HANDLED; 955 } 956 957 static irqreturn_t sci_br_interrupt(int irq, void *ptr) 958 { 959 struct uart_port *port = ptr; 960 961 /* Handle BREAKs */ 962 sci_handle_breaks(port); 963 serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); 964 965 return IRQ_HANDLED; 966 } 967 968 static inline unsigned long port_rx_irq_mask(struct uart_port *port) 969 { 970 /* 971 * Not all ports (such as SCIFA) will support REIE. Rather than 972 * special-casing the port type, we check the port initialization 973 * IRQ enable mask to see whether the IRQ is desired at all. If 974 * it's unset, it's logically inferred that there's no point in 975 * testing for it. 976 */ 977 return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); 978 } 979 980 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) 981 { 982 unsigned short ssr_status, scr_status, err_enabled; 983 struct uart_port *port = ptr; 984 struct sci_port *s = to_sci_port(port); 985 irqreturn_t ret = IRQ_NONE; 986 987 ssr_status = serial_port_in(port, SCxSR); 988 scr_status = serial_port_in(port, SCSCR); 989 err_enabled = scr_status & port_rx_irq_mask(port); 990 991 /* Tx Interrupt */ 992 if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) && 993 !s->chan_tx) 994 ret = sci_tx_interrupt(irq, ptr); 995 996 /* 997 * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / 998 * DR flags 999 */ 1000 if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && 1001 (scr_status & SCSCR_RIE)) 1002 ret = sci_rx_interrupt(irq, ptr); 1003 1004 /* Error Interrupt */ 1005 if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) 1006 ret = sci_er_interrupt(irq, ptr); 1007 1008 /* Break Interrupt */ 1009 if ((ssr_status & SCxSR_BRK(port)) && err_enabled) 1010 ret = sci_br_interrupt(irq, ptr); 1011 1012 return ret; 1013 } 1014 1015 /* 1016 * Here we define a transition notifier so that we can update all of our 1017 * ports' baud rate when the peripheral clock changes. 1018 */ 1019 static int sci_notifier(struct notifier_block *self, 1020 unsigned long phase, void *p) 1021 { 1022 struct sci_port *sci_port; 1023 unsigned long flags; 1024 1025 sci_port = container_of(self, struct sci_port, freq_transition); 1026 1027 if ((phase == CPUFREQ_POSTCHANGE) || 1028 (phase == CPUFREQ_RESUMECHANGE)) { 1029 struct uart_port *port = &sci_port->port; 1030 1031 spin_lock_irqsave(&port->lock, flags); 1032 port->uartclk = clk_get_rate(sci_port->iclk); 1033 spin_unlock_irqrestore(&port->lock, flags); 1034 } 1035 1036 return NOTIFY_OK; 1037 } 1038 1039 static struct sci_irq_desc { 1040 const char *desc; 1041 irq_handler_t handler; 1042 } sci_irq_desc[] = { 1043 /* 1044 * Split out handlers, the default case. 1045 */ 1046 [SCIx_ERI_IRQ] = { 1047 .desc = "rx err", 1048 .handler = sci_er_interrupt, 1049 }, 1050 1051 [SCIx_RXI_IRQ] = { 1052 .desc = "rx full", 1053 .handler = sci_rx_interrupt, 1054 }, 1055 1056 [SCIx_TXI_IRQ] = { 1057 .desc = "tx empty", 1058 .handler = sci_tx_interrupt, 1059 }, 1060 1061 [SCIx_BRI_IRQ] = { 1062 .desc = "break", 1063 .handler = sci_br_interrupt, 1064 }, 1065 1066 /* 1067 * Special muxed handler. 1068 */ 1069 [SCIx_MUX_IRQ] = { 1070 .desc = "mux", 1071 .handler = sci_mpxed_interrupt, 1072 }, 1073 }; 1074 1075 static int sci_request_irq(struct sci_port *port) 1076 { 1077 struct uart_port *up = &port->port; 1078 int i, j, ret = 0; 1079 1080 for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { 1081 struct sci_irq_desc *desc; 1082 unsigned int irq; 1083 1084 if (SCIx_IRQ_IS_MUXED(port)) { 1085 i = SCIx_MUX_IRQ; 1086 irq = up->irq; 1087 } else { 1088 irq = port->cfg->irqs[i]; 1089 1090 /* 1091 * Certain port types won't support all of the 1092 * available interrupt sources. 1093 */ 1094 if (unlikely(!irq)) 1095 continue; 1096 } 1097 1098 desc = sci_irq_desc + i; 1099 port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", 1100 dev_name(up->dev), desc->desc); 1101 if (!port->irqstr[j]) { 1102 dev_err(up->dev, "Failed to allocate %s IRQ string\n", 1103 desc->desc); 1104 goto out_nomem; 1105 } 1106 1107 ret = request_irq(irq, desc->handler, up->irqflags, 1108 port->irqstr[j], port); 1109 if (unlikely(ret)) { 1110 dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc); 1111 goto out_noirq; 1112 } 1113 } 1114 1115 return 0; 1116 1117 out_noirq: 1118 while (--i >= 0) 1119 free_irq(port->cfg->irqs[i], port); 1120 1121 out_nomem: 1122 while (--j >= 0) 1123 kfree(port->irqstr[j]); 1124 1125 return ret; 1126 } 1127 1128 static void sci_free_irq(struct sci_port *port) 1129 { 1130 int i; 1131 1132 /* 1133 * Intentionally in reverse order so we iterate over the muxed 1134 * IRQ first. 1135 */ 1136 for (i = 0; i < SCIx_NR_IRQS; i++) { 1137 unsigned int irq = port->cfg->irqs[i]; 1138 1139 /* 1140 * Certain port types won't support all of the available 1141 * interrupt sources. 1142 */ 1143 if (unlikely(!irq)) 1144 continue; 1145 1146 free_irq(port->cfg->irqs[i], port); 1147 kfree(port->irqstr[i]); 1148 1149 if (SCIx_IRQ_IS_MUXED(port)) { 1150 /* If there's only one IRQ, we're done. */ 1151 return; 1152 } 1153 } 1154 } 1155 1156 static const char *sci_gpio_names[SCIx_NR_FNS] = { 1157 "sck", "rxd", "txd", "cts", "rts", 1158 }; 1159 1160 static const char *sci_gpio_str(unsigned int index) 1161 { 1162 return sci_gpio_names[index]; 1163 } 1164 1165 static void sci_init_gpios(struct sci_port *port) 1166 { 1167 struct uart_port *up = &port->port; 1168 int i; 1169 1170 if (!port->cfg) 1171 return; 1172 1173 for (i = 0; i < SCIx_NR_FNS; i++) { 1174 const char *desc; 1175 int ret; 1176 1177 if (!port->cfg->gpios[i]) 1178 continue; 1179 1180 desc = sci_gpio_str(i); 1181 1182 port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s", 1183 dev_name(up->dev), desc); 1184 1185 /* 1186 * If we've failed the allocation, we can still continue 1187 * on with a NULL string. 1188 */ 1189 if (!port->gpiostr[i]) 1190 dev_notice(up->dev, "%s string allocation failure\n", 1191 desc); 1192 1193 ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]); 1194 if (unlikely(ret != 0)) { 1195 dev_notice(up->dev, "failed %s gpio request\n", desc); 1196 1197 /* 1198 * If we can't get the GPIO for whatever reason, 1199 * no point in keeping the verbose string around. 1200 */ 1201 kfree(port->gpiostr[i]); 1202 } 1203 } 1204 } 1205 1206 static void sci_free_gpios(struct sci_port *port) 1207 { 1208 int i; 1209 1210 for (i = 0; i < SCIx_NR_FNS; i++) 1211 if (port->cfg->gpios[i]) { 1212 gpio_free(port->cfg->gpios[i]); 1213 kfree(port->gpiostr[i]); 1214 } 1215 } 1216 1217 static unsigned int sci_tx_empty(struct uart_port *port) 1218 { 1219 unsigned short status = serial_port_in(port, SCxSR); 1220 unsigned short in_tx_fifo = sci_txfill(port); 1221 1222 return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; 1223 } 1224 1225 /* 1226 * Modem control is a bit of a mixed bag for SCI(F) ports. Generally 1227 * CTS/RTS is supported in hardware by at least one port and controlled 1228 * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently 1229 * handled via the ->init_pins() op, which is a bit of a one-way street, 1230 * lacking any ability to defer pin control -- this will later be 1231 * converted over to the GPIO framework). 1232 * 1233 * Other modes (such as loopback) are supported generically on certain 1234 * port types, but not others. For these it's sufficient to test for the 1235 * existence of the support register and simply ignore the port type. 1236 */ 1237 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) 1238 { 1239 if (mctrl & TIOCM_LOOP) { 1240 struct plat_sci_reg *reg; 1241 1242 /* 1243 * Standard loopback mode for SCFCR ports. 1244 */ 1245 reg = sci_getreg(port, SCFCR); 1246 if (reg->size) 1247 serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1); 1248 } 1249 } 1250 1251 static unsigned int sci_get_mctrl(struct uart_port *port) 1252 { 1253 /* 1254 * CTS/RTS is handled in hardware when supported, while nothing 1255 * else is wired up. Keep it simple and simply assert DSR/CAR. 1256 */ 1257 return TIOCM_DSR | TIOCM_CAR; 1258 } 1259 1260 #ifdef CONFIG_SERIAL_SH_SCI_DMA 1261 static void sci_dma_tx_complete(void *arg) 1262 { 1263 struct sci_port *s = arg; 1264 struct uart_port *port = &s->port; 1265 struct circ_buf *xmit = &port->state->xmit; 1266 unsigned long flags; 1267 1268 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); 1269 1270 spin_lock_irqsave(&port->lock, flags); 1271 1272 xmit->tail += sg_dma_len(&s->sg_tx); 1273 xmit->tail &= UART_XMIT_SIZE - 1; 1274 1275 port->icount.tx += sg_dma_len(&s->sg_tx); 1276 1277 async_tx_ack(s->desc_tx); 1278 s->desc_tx = NULL; 1279 1280 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 1281 uart_write_wakeup(port); 1282 1283 if (!uart_circ_empty(xmit)) { 1284 s->cookie_tx = 0; 1285 schedule_work(&s->work_tx); 1286 } else { 1287 s->cookie_tx = -EINVAL; 1288 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { 1289 u16 ctrl = serial_port_in(port, SCSCR); 1290 serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); 1291 } 1292 } 1293 1294 spin_unlock_irqrestore(&port->lock, flags); 1295 } 1296 1297 /* Locking: called with port lock held */ 1298 static int sci_dma_rx_push(struct sci_port *s, size_t count) 1299 { 1300 struct uart_port *port = &s->port; 1301 struct tty_port *tport = &port->state->port; 1302 int i, active, room; 1303 1304 room = tty_buffer_request_room(tport, count); 1305 1306 if (s->active_rx == s->cookie_rx[0]) { 1307 active = 0; 1308 } else if (s->active_rx == s->cookie_rx[1]) { 1309 active = 1; 1310 } else { 1311 dev_err(port->dev, "cookie %d not found!\n", s->active_rx); 1312 return 0; 1313 } 1314 1315 if (room < count) 1316 dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n", 1317 count - room); 1318 if (!room) 1319 return room; 1320 1321 for (i = 0; i < room; i++) 1322 tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i], 1323 TTY_NORMAL); 1324 1325 port->icount.rx += room; 1326 1327 return room; 1328 } 1329 1330 static void sci_dma_rx_complete(void *arg) 1331 { 1332 struct sci_port *s = arg; 1333 struct uart_port *port = &s->port; 1334 unsigned long flags; 1335 int count; 1336 1337 dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); 1338 1339 spin_lock_irqsave(&port->lock, flags); 1340 1341 count = sci_dma_rx_push(s, s->buf_len_rx); 1342 1343 mod_timer(&s->rx_timer, jiffies + s->rx_timeout); 1344 1345 spin_unlock_irqrestore(&port->lock, flags); 1346 1347 if (count) 1348 tty_flip_buffer_push(&port->state->port); 1349 1350 schedule_work(&s->work_rx); 1351 } 1352 1353 static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) 1354 { 1355 struct dma_chan *chan = s->chan_rx; 1356 struct uart_port *port = &s->port; 1357 1358 s->chan_rx = NULL; 1359 s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; 1360 dma_release_channel(chan); 1361 if (sg_dma_address(&s->sg_rx[0])) 1362 dma_free_coherent(port->dev, s->buf_len_rx * 2, 1363 sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); 1364 if (enable_pio) 1365 sci_start_rx(port); 1366 } 1367 1368 static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) 1369 { 1370 struct dma_chan *chan = s->chan_tx; 1371 struct uart_port *port = &s->port; 1372 1373 s->chan_tx = NULL; 1374 s->cookie_tx = -EINVAL; 1375 dma_release_channel(chan); 1376 if (enable_pio) 1377 sci_start_tx(port); 1378 } 1379 1380 static void sci_submit_rx(struct sci_port *s) 1381 { 1382 struct dma_chan *chan = s->chan_rx; 1383 int i; 1384 1385 for (i = 0; i < 2; i++) { 1386 struct scatterlist *sg = &s->sg_rx[i]; 1387 struct dma_async_tx_descriptor *desc; 1388 1389 desc = dmaengine_prep_slave_sg(chan, 1390 sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); 1391 1392 if (desc) { 1393 s->desc_rx[i] = desc; 1394 desc->callback = sci_dma_rx_complete; 1395 desc->callback_param = s; 1396 s->cookie_rx[i] = desc->tx_submit(desc); 1397 } 1398 1399 if (!desc || s->cookie_rx[i] < 0) { 1400 if (i) { 1401 async_tx_ack(s->desc_rx[0]); 1402 s->cookie_rx[0] = -EINVAL; 1403 } 1404 if (desc) { 1405 async_tx_ack(desc); 1406 s->cookie_rx[i] = -EINVAL; 1407 } 1408 dev_warn(s->port.dev, 1409 "failed to re-start DMA, using PIO\n"); 1410 sci_rx_dma_release(s, true); 1411 return; 1412 } 1413 dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, 1414 s->cookie_rx[i], i); 1415 } 1416 1417 s->active_rx = s->cookie_rx[0]; 1418 1419 dma_async_issue_pending(chan); 1420 } 1421 1422 static void work_fn_rx(struct work_struct *work) 1423 { 1424 struct sci_port *s = container_of(work, struct sci_port, work_rx); 1425 struct uart_port *port = &s->port; 1426 struct dma_async_tx_descriptor *desc; 1427 int new; 1428 1429 if (s->active_rx == s->cookie_rx[0]) { 1430 new = 0; 1431 } else if (s->active_rx == s->cookie_rx[1]) { 1432 new = 1; 1433 } else { 1434 dev_err(port->dev, "cookie %d not found!\n", s->active_rx); 1435 return; 1436 } 1437 desc = s->desc_rx[new]; 1438 1439 if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != 1440 DMA_COMPLETE) { 1441 /* Handle incomplete DMA receive */ 1442 struct dma_chan *chan = s->chan_rx; 1443 struct shdma_desc *sh_desc = container_of(desc, 1444 struct shdma_desc, async_tx); 1445 unsigned long flags; 1446 int count; 1447 1448 chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); 1449 dev_dbg(port->dev, "Read %zu bytes with cookie %d\n", 1450 sh_desc->partial, sh_desc->cookie); 1451 1452 spin_lock_irqsave(&port->lock, flags); 1453 count = sci_dma_rx_push(s, sh_desc->partial); 1454 spin_unlock_irqrestore(&port->lock, flags); 1455 1456 if (count) 1457 tty_flip_buffer_push(&port->state->port); 1458 1459 sci_submit_rx(s); 1460 1461 return; 1462 } 1463 1464 s->cookie_rx[new] = desc->tx_submit(desc); 1465 if (s->cookie_rx[new] < 0) { 1466 dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); 1467 sci_rx_dma_release(s, true); 1468 return; 1469 } 1470 1471 s->active_rx = s->cookie_rx[!new]; 1472 1473 dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, 1474 s->cookie_rx[new], new, s->active_rx); 1475 } 1476 1477 static void work_fn_tx(struct work_struct *work) 1478 { 1479 struct sci_port *s = container_of(work, struct sci_port, work_tx); 1480 struct dma_async_tx_descriptor *desc; 1481 struct dma_chan *chan = s->chan_tx; 1482 struct uart_port *port = &s->port; 1483 struct circ_buf *xmit = &port->state->xmit; 1484 struct scatterlist *sg = &s->sg_tx; 1485 1486 /* 1487 * DMA is idle now. 1488 * Port xmit buffer is already mapped, and it is one page... Just adjust 1489 * offsets and lengths. Since it is a circular buffer, we have to 1490 * transmit till the end, and then the rest. Take the port lock to get a 1491 * consistent xmit buffer state. 1492 */ 1493 spin_lock_irq(&port->lock); 1494 sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); 1495 sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + 1496 sg->offset; 1497 sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), 1498 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); 1499 spin_unlock_irq(&port->lock); 1500 1501 BUG_ON(!sg_dma_len(sg)); 1502 1503 desc = dmaengine_prep_slave_sg(chan, 1504 sg, s->sg_len_tx, DMA_MEM_TO_DEV, 1505 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 1506 if (!desc) { 1507 /* switch to PIO */ 1508 sci_tx_dma_release(s, true); 1509 return; 1510 } 1511 1512 dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); 1513 1514 spin_lock_irq(&port->lock); 1515 s->desc_tx = desc; 1516 desc->callback = sci_dma_tx_complete; 1517 desc->callback_param = s; 1518 spin_unlock_irq(&port->lock); 1519 s->cookie_tx = desc->tx_submit(desc); 1520 if (s->cookie_tx < 0) { 1521 dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); 1522 /* switch to PIO */ 1523 sci_tx_dma_release(s, true); 1524 return; 1525 } 1526 1527 dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, 1528 xmit->buf, xmit->tail, xmit->head, s->cookie_tx); 1529 1530 dma_async_issue_pending(chan); 1531 } 1532 #endif 1533 1534 static void sci_start_tx(struct uart_port *port) 1535 { 1536 struct sci_port *s = to_sci_port(port); 1537 unsigned short ctrl; 1538 1539 #ifdef CONFIG_SERIAL_SH_SCI_DMA 1540 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { 1541 u16 new, scr = serial_port_in(port, SCSCR); 1542 if (s->chan_tx) 1543 new = scr | 0x8000; 1544 else 1545 new = scr & ~0x8000; 1546 if (new != scr) 1547 serial_port_out(port, SCSCR, new); 1548 } 1549 1550 if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && 1551 s->cookie_tx < 0) { 1552 s->cookie_tx = 0; 1553 schedule_work(&s->work_tx); 1554 } 1555 #endif 1556 1557 if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { 1558 /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ 1559 ctrl = serial_port_in(port, SCSCR); 1560 serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); 1561 } 1562 } 1563 1564 static void sci_stop_tx(struct uart_port *port) 1565 { 1566 unsigned short ctrl; 1567 1568 /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ 1569 ctrl = serial_port_in(port, SCSCR); 1570 1571 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) 1572 ctrl &= ~0x8000; 1573 1574 ctrl &= ~SCSCR_TIE; 1575 1576 serial_port_out(port, SCSCR, ctrl); 1577 } 1578 1579 static void sci_start_rx(struct uart_port *port) 1580 { 1581 unsigned short ctrl; 1582 1583 ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); 1584 1585 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) 1586 ctrl &= ~0x4000; 1587 1588 serial_port_out(port, SCSCR, ctrl); 1589 } 1590 1591 static void sci_stop_rx(struct uart_port *port) 1592 { 1593 unsigned short ctrl; 1594 1595 ctrl = serial_port_in(port, SCSCR); 1596 1597 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) 1598 ctrl &= ~0x4000; 1599 1600 ctrl &= ~port_rx_irq_mask(port); 1601 1602 serial_port_out(port, SCSCR, ctrl); 1603 } 1604 1605 static void sci_enable_ms(struct uart_port *port) 1606 { 1607 /* 1608 * Not supported by hardware, always a nop. 1609 */ 1610 } 1611 1612 static void sci_break_ctl(struct uart_port *port, int break_state) 1613 { 1614 struct sci_port *s = to_sci_port(port); 1615 struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; 1616 unsigned short scscr, scsptr; 1617 1618 /* check wheter the port has SCSPTR */ 1619 if (!reg->size) { 1620 /* 1621 * Not supported by hardware. Most parts couple break and rx 1622 * interrupts together, with break detection always enabled. 1623 */ 1624 return; 1625 } 1626 1627 scsptr = serial_port_in(port, SCSPTR); 1628 scscr = serial_port_in(port, SCSCR); 1629 1630 if (break_state == -1) { 1631 scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT; 1632 scscr &= ~SCSCR_TE; 1633 } else { 1634 scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO; 1635 scscr |= SCSCR_TE; 1636 } 1637 1638 serial_port_out(port, SCSPTR, scsptr); 1639 serial_port_out(port, SCSCR, scscr); 1640 } 1641 1642 #ifdef CONFIG_SERIAL_SH_SCI_DMA 1643 static bool filter(struct dma_chan *chan, void *slave) 1644 { 1645 struct sh_dmae_slave *param = slave; 1646 1647 dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, 1648 param->shdma_slave.slave_id); 1649 1650 chan->private = ¶m->shdma_slave; 1651 return true; 1652 } 1653 1654 static void rx_timer_fn(unsigned long arg) 1655 { 1656 struct sci_port *s = (struct sci_port *)arg; 1657 struct uart_port *port = &s->port; 1658 u16 scr = serial_port_in(port, SCSCR); 1659 1660 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { 1661 scr &= ~0x4000; 1662 enable_irq(s->cfg->irqs[1]); 1663 } 1664 serial_port_out(port, SCSCR, scr | SCSCR_RIE); 1665 dev_dbg(port->dev, "DMA Rx timed out\n"); 1666 schedule_work(&s->work_rx); 1667 } 1668 1669 static void sci_request_dma(struct uart_port *port) 1670 { 1671 struct sci_port *s = to_sci_port(port); 1672 struct sh_dmae_slave *param; 1673 struct dma_chan *chan; 1674 dma_cap_mask_t mask; 1675 int nent; 1676 1677 dev_dbg(port->dev, "%s: port %d\n", __func__, 1678 port->line); 1679 1680 if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) 1681 return; 1682 1683 dma_cap_zero(mask); 1684 dma_cap_set(DMA_SLAVE, mask); 1685 1686 param = &s->param_tx; 1687 1688 /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ 1689 param->shdma_slave.slave_id = s->cfg->dma_slave_tx; 1690 1691 s->cookie_tx = -EINVAL; 1692 chan = dma_request_channel(mask, filter, param); 1693 dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); 1694 if (chan) { 1695 s->chan_tx = chan; 1696 sg_init_table(&s->sg_tx, 1); 1697 /* UART circular tx buffer is an aligned page. */ 1698 BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK); 1699 sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), 1700 UART_XMIT_SIZE, 1701 (uintptr_t)port->state->xmit.buf & ~PAGE_MASK); 1702 nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); 1703 if (!nent) 1704 sci_tx_dma_release(s, false); 1705 else 1706 dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, 1707 sg_dma_len(&s->sg_tx), port->state->xmit.buf, 1708 &sg_dma_address(&s->sg_tx)); 1709 1710 s->sg_len_tx = nent; 1711 1712 INIT_WORK(&s->work_tx, work_fn_tx); 1713 } 1714 1715 param = &s->param_rx; 1716 1717 /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ 1718 param->shdma_slave.slave_id = s->cfg->dma_slave_rx; 1719 1720 chan = dma_request_channel(mask, filter, param); 1721 dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); 1722 if (chan) { 1723 dma_addr_t dma[2]; 1724 void *buf[2]; 1725 int i; 1726 1727 s->chan_rx = chan; 1728 1729 s->buf_len_rx = 2 * max(16, (int)port->fifosize); 1730 buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, 1731 &dma[0], GFP_KERNEL); 1732 1733 if (!buf[0]) { 1734 dev_warn(port->dev, 1735 "failed to allocate dma buffer, using PIO\n"); 1736 sci_rx_dma_release(s, true); 1737 return; 1738 } 1739 1740 buf[1] = buf[0] + s->buf_len_rx; 1741 dma[1] = dma[0] + s->buf_len_rx; 1742 1743 for (i = 0; i < 2; i++) { 1744 struct scatterlist *sg = &s->sg_rx[i]; 1745 1746 sg_init_table(sg, 1); 1747 sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, 1748 (uintptr_t)buf[i] & ~PAGE_MASK); 1749 sg_dma_address(sg) = dma[i]; 1750 } 1751 1752 INIT_WORK(&s->work_rx, work_fn_rx); 1753 setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); 1754 1755 sci_submit_rx(s); 1756 } 1757 } 1758 1759 static void sci_free_dma(struct uart_port *port) 1760 { 1761 struct sci_port *s = to_sci_port(port); 1762 1763 if (s->chan_tx) 1764 sci_tx_dma_release(s, false); 1765 if (s->chan_rx) 1766 sci_rx_dma_release(s, false); 1767 } 1768 #else 1769 static inline void sci_request_dma(struct uart_port *port) 1770 { 1771 } 1772 1773 static inline void sci_free_dma(struct uart_port *port) 1774 { 1775 } 1776 #endif 1777 1778 static int sci_startup(struct uart_port *port) 1779 { 1780 struct sci_port *s = to_sci_port(port); 1781 unsigned long flags; 1782 int ret; 1783 1784 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); 1785 1786 ret = sci_request_irq(s); 1787 if (unlikely(ret < 0)) 1788 return ret; 1789 1790 sci_request_dma(port); 1791 1792 spin_lock_irqsave(&port->lock, flags); 1793 sci_start_tx(port); 1794 sci_start_rx(port); 1795 spin_unlock_irqrestore(&port->lock, flags); 1796 1797 return 0; 1798 } 1799 1800 static void sci_shutdown(struct uart_port *port) 1801 { 1802 struct sci_port *s = to_sci_port(port); 1803 unsigned long flags; 1804 1805 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); 1806 1807 spin_lock_irqsave(&port->lock, flags); 1808 sci_stop_rx(port); 1809 sci_stop_tx(port); 1810 spin_unlock_irqrestore(&port->lock, flags); 1811 1812 sci_free_dma(port); 1813 sci_free_irq(s); 1814 } 1815 1816 static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, 1817 unsigned long freq) 1818 { 1819 switch (algo_id) { 1820 case SCBRR_ALGO_1: 1821 return freq / (16 * bps); 1822 case SCBRR_ALGO_2: 1823 return DIV_ROUND_CLOSEST(freq, 32 * bps) - 1; 1824 case SCBRR_ALGO_3: 1825 return freq / (8 * bps); 1826 case SCBRR_ALGO_4: 1827 return DIV_ROUND_CLOSEST(freq, 16 * bps) - 1; 1828 } 1829 1830 /* Warn, but use a safe default */ 1831 WARN_ON(1); 1832 1833 return ((freq + 16 * bps) / (32 * bps) - 1); 1834 } 1835 1836 /* calculate sample rate, BRR, and clock select for HSCIF */ 1837 static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, 1838 int *brr, unsigned int *srr, 1839 unsigned int *cks) 1840 { 1841 int sr, c, br, err; 1842 int min_err = 1000; /* 100% */ 1843 1844 /* Find the combination of sample rate and clock select with the 1845 smallest deviation from the desired baud rate. */ 1846 for (sr = 8; sr <= 32; sr++) { 1847 for (c = 0; c <= 3; c++) { 1848 /* integerized formulas from HSCIF documentation */ 1849 br = freq / (sr * (1 << (2 * c + 1)) * bps) - 1; 1850 if (br < 0 || br > 255) 1851 continue; 1852 err = freq / ((br + 1) * bps * sr * 1853 (1 << (2 * c + 1)) / 1000) - 1000; 1854 if (min_err > err) { 1855 min_err = err; 1856 *brr = br; 1857 *srr = sr - 1; 1858 *cks = c; 1859 } 1860 } 1861 } 1862 1863 if (min_err == 1000) { 1864 WARN_ON(1); 1865 /* use defaults */ 1866 *brr = 255; 1867 *srr = 15; 1868 *cks = 0; 1869 } 1870 } 1871 1872 static void sci_reset(struct uart_port *port) 1873 { 1874 struct plat_sci_reg *reg; 1875 unsigned int status; 1876 1877 do { 1878 status = serial_port_in(port, SCxSR); 1879 } while (!(status & SCxSR_TEND(port))); 1880 1881 serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ 1882 1883 reg = sci_getreg(port, SCFCR); 1884 if (reg->size) 1885 serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); 1886 } 1887 1888 static void sci_set_termios(struct uart_port *port, struct ktermios *termios, 1889 struct ktermios *old) 1890 { 1891 struct sci_port *s = to_sci_port(port); 1892 struct plat_sci_reg *reg; 1893 unsigned int baud, smr_val, max_baud, cks = 0; 1894 int t = -1; 1895 unsigned int srr = 15; 1896 1897 /* 1898 * earlyprintk comes here early on with port->uartclk set to zero. 1899 * the clock framework is not up and running at this point so here 1900 * we assume that 115200 is the maximum baud rate. please note that 1901 * the baud rate is not programmed during earlyprintk - it is assumed 1902 * that the previous boot loader has enabled required clocks and 1903 * setup the baud rate generator hardware for us already. 1904 */ 1905 max_baud = port->uartclk ? port->uartclk / 16 : 115200; 1906 1907 baud = uart_get_baud_rate(port, termios, old, 0, max_baud); 1908 if (likely(baud && port->uartclk)) { 1909 if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) { 1910 sci_baud_calc_hscif(baud, port->uartclk, &t, &srr, 1911 &cks); 1912 } else { 1913 t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, 1914 port->uartclk); 1915 for (cks = 0; t >= 256 && cks <= 3; cks++) 1916 t >>= 2; 1917 } 1918 } 1919 1920 sci_port_enable(s); 1921 1922 sci_reset(port); 1923 1924 smr_val = serial_port_in(port, SCSMR) & 3; 1925 1926 if ((termios->c_cflag & CSIZE) == CS7) 1927 smr_val |= 0x40; 1928 if (termios->c_cflag & PARENB) 1929 smr_val |= 0x20; 1930 if (termios->c_cflag & PARODD) 1931 smr_val |= 0x30; 1932 if (termios->c_cflag & CSTOPB) 1933 smr_val |= 0x08; 1934 1935 uart_update_timeout(port, termios->c_cflag, baud); 1936 1937 dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n", 1938 __func__, smr_val, cks, t, s->cfg->scscr); 1939 1940 if (t >= 0) { 1941 serial_port_out(port, SCSMR, (smr_val & ~3) | cks); 1942 serial_port_out(port, SCBRR, t); 1943 reg = sci_getreg(port, HSSRR); 1944 if (reg->size) 1945 serial_port_out(port, HSSRR, srr | HSCIF_SRE); 1946 udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ 1947 } else 1948 serial_port_out(port, SCSMR, smr_val); 1949 1950 sci_init_pins(port, termios->c_cflag); 1951 1952 reg = sci_getreg(port, SCFCR); 1953 if (reg->size) { 1954 unsigned short ctrl = serial_port_in(port, SCFCR); 1955 1956 if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) { 1957 if (termios->c_cflag & CRTSCTS) 1958 ctrl |= SCFCR_MCE; 1959 else 1960 ctrl &= ~SCFCR_MCE; 1961 } 1962 1963 /* 1964 * As we've done a sci_reset() above, ensure we don't 1965 * interfere with the FIFOs while toggling MCE. As the 1966 * reset values could still be set, simply mask them out. 1967 */ 1968 ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST); 1969 1970 serial_port_out(port, SCFCR, ctrl); 1971 } 1972 1973 serial_port_out(port, SCSCR, s->cfg->scscr); 1974 1975 #ifdef CONFIG_SERIAL_SH_SCI_DMA 1976 /* 1977 * Calculate delay for 1.5 DMA buffers: see 1978 * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits 1979 * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function 1980 * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." 1981 * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO 1982 * sizes), but it has been found out experimentally, that this is not 1983 * enough: the driver too often needlessly runs on a DMA timeout. 20ms 1984 * as a minimum seem to work perfectly. 1985 */ 1986 if (s->chan_rx) { 1987 s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / 1988 port->fifosize / 2; 1989 dev_dbg(port->dev, 1990 "DMA Rx t-out %ums, tty t-out %u jiffies\n", 1991 s->rx_timeout * 1000 / HZ, port->timeout); 1992 if (s->rx_timeout < msecs_to_jiffies(20)) 1993 s->rx_timeout = msecs_to_jiffies(20); 1994 } 1995 #endif 1996 1997 if ((termios->c_cflag & CREAD) != 0) 1998 sci_start_rx(port); 1999 2000 sci_port_disable(s); 2001 } 2002 2003 static void sci_pm(struct uart_port *port, unsigned int state, 2004 unsigned int oldstate) 2005 { 2006 struct sci_port *sci_port = to_sci_port(port); 2007 2008 switch (state) { 2009 case 3: 2010 sci_port_disable(sci_port); 2011 break; 2012 default: 2013 sci_port_enable(sci_port); 2014 break; 2015 } 2016 } 2017 2018 static const char *sci_type(struct uart_port *port) 2019 { 2020 switch (port->type) { 2021 case PORT_IRDA: 2022 return "irda"; 2023 case PORT_SCI: 2024 return "sci"; 2025 case PORT_SCIF: 2026 return "scif"; 2027 case PORT_SCIFA: 2028 return "scifa"; 2029 case PORT_SCIFB: 2030 return "scifb"; 2031 case PORT_HSCIF: 2032 return "hscif"; 2033 } 2034 2035 return NULL; 2036 } 2037 2038 static inline unsigned long sci_port_size(struct uart_port *port) 2039 { 2040 /* 2041 * Pick an arbitrary size that encapsulates all of the base 2042 * registers by default. This can be optimized later, or derived 2043 * from platform resource data at such a time that ports begin to 2044 * behave more erratically. 2045 */ 2046 if (port->type == PORT_HSCIF) 2047 return 96; 2048 else 2049 return 64; 2050 } 2051 2052 static int sci_remap_port(struct uart_port *port) 2053 { 2054 unsigned long size = sci_port_size(port); 2055 2056 /* 2057 * Nothing to do if there's already an established membase. 2058 */ 2059 if (port->membase) 2060 return 0; 2061 2062 if (port->flags & UPF_IOREMAP) { 2063 port->membase = ioremap_nocache(port->mapbase, size); 2064 if (unlikely(!port->membase)) { 2065 dev_err(port->dev, "can't remap port#%d\n", port->line); 2066 return -ENXIO; 2067 } 2068 } else { 2069 /* 2070 * For the simple (and majority of) cases where we don't 2071 * need to do any remapping, just cast the cookie 2072 * directly. 2073 */ 2074 port->membase = (void __iomem *)port->mapbase; 2075 } 2076 2077 return 0; 2078 } 2079 2080 static void sci_release_port(struct uart_port *port) 2081 { 2082 if (port->flags & UPF_IOREMAP) { 2083 iounmap(port->membase); 2084 port->membase = NULL; 2085 } 2086 2087 release_mem_region(port->mapbase, sci_port_size(port)); 2088 } 2089 2090 static int sci_request_port(struct uart_port *port) 2091 { 2092 unsigned long size = sci_port_size(port); 2093 struct resource *res; 2094 int ret; 2095 2096 res = request_mem_region(port->mapbase, size, dev_name(port->dev)); 2097 if (unlikely(res == NULL)) 2098 return -EBUSY; 2099 2100 ret = sci_remap_port(port); 2101 if (unlikely(ret != 0)) { 2102 release_resource(res); 2103 return ret; 2104 } 2105 2106 return 0; 2107 } 2108 2109 static void sci_config_port(struct uart_port *port, int flags) 2110 { 2111 if (flags & UART_CONFIG_TYPE) { 2112 struct sci_port *sport = to_sci_port(port); 2113 2114 port->type = sport->cfg->type; 2115 sci_request_port(port); 2116 } 2117 } 2118 2119 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) 2120 { 2121 struct sci_port *s = to_sci_port(port); 2122 2123 if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ]) 2124 return -EINVAL; 2125 if (ser->baud_base < 2400) 2126 /* No paper tape reader for Mitch.. */ 2127 return -EINVAL; 2128 2129 return 0; 2130 } 2131 2132 static struct uart_ops sci_uart_ops = { 2133 .tx_empty = sci_tx_empty, 2134 .set_mctrl = sci_set_mctrl, 2135 .get_mctrl = sci_get_mctrl, 2136 .start_tx = sci_start_tx, 2137 .stop_tx = sci_stop_tx, 2138 .stop_rx = sci_stop_rx, 2139 .enable_ms = sci_enable_ms, 2140 .break_ctl = sci_break_ctl, 2141 .startup = sci_startup, 2142 .shutdown = sci_shutdown, 2143 .set_termios = sci_set_termios, 2144 .pm = sci_pm, 2145 .type = sci_type, 2146 .release_port = sci_release_port, 2147 .request_port = sci_request_port, 2148 .config_port = sci_config_port, 2149 .verify_port = sci_verify_port, 2150 #ifdef CONFIG_CONSOLE_POLL 2151 .poll_get_char = sci_poll_get_char, 2152 .poll_put_char = sci_poll_put_char, 2153 #endif 2154 }; 2155 2156 static int sci_init_single(struct platform_device *dev, 2157 struct sci_port *sci_port, 2158 unsigned int index, 2159 struct plat_sci_port *p) 2160 { 2161 struct uart_port *port = &sci_port->port; 2162 int ret; 2163 2164 sci_port->cfg = p; 2165 2166 port->ops = &sci_uart_ops; 2167 port->iotype = UPIO_MEM; 2168 port->line = index; 2169 2170 switch (p->type) { 2171 case PORT_SCIFB: 2172 port->fifosize = 256; 2173 break; 2174 case PORT_HSCIF: 2175 port->fifosize = 128; 2176 break; 2177 case PORT_SCIFA: 2178 port->fifosize = 64; 2179 break; 2180 case PORT_SCIF: 2181 port->fifosize = 16; 2182 break; 2183 default: 2184 port->fifosize = 1; 2185 break; 2186 } 2187 2188 if (p->regtype == SCIx_PROBE_REGTYPE) { 2189 ret = sci_probe_regmap(p); 2190 if (unlikely(ret)) 2191 return ret; 2192 } 2193 2194 if (dev) { 2195 sci_port->iclk = clk_get(&dev->dev, "sci_ick"); 2196 if (IS_ERR(sci_port->iclk)) { 2197 sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); 2198 if (IS_ERR(sci_port->iclk)) { 2199 dev_err(&dev->dev, "can't get iclk\n"); 2200 return PTR_ERR(sci_port->iclk); 2201 } 2202 } 2203 2204 /* 2205 * The function clock is optional, ignore it if we can't 2206 * find it. 2207 */ 2208 sci_port->fclk = clk_get(&dev->dev, "sci_fck"); 2209 if (IS_ERR(sci_port->fclk)) 2210 sci_port->fclk = NULL; 2211 2212 port->dev = &dev->dev; 2213 2214 sci_init_gpios(sci_port); 2215 2216 pm_runtime_enable(&dev->dev); 2217 } 2218 2219 sci_port->break_timer.data = (unsigned long)sci_port; 2220 sci_port->break_timer.function = sci_break_timer; 2221 init_timer(&sci_port->break_timer); 2222 2223 /* 2224 * Establish some sensible defaults for the error detection. 2225 */ 2226 if (!p->error_mask) 2227 p->error_mask = (p->type == PORT_SCI) ? 2228 SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; 2229 2230 /* 2231 * Establish sensible defaults for the overrun detection, unless 2232 * the part has explicitly disabled support for it. 2233 */ 2234 if (p->overrun_bit != SCIx_NOT_SUPPORTED) { 2235 if (p->type == PORT_SCI) 2236 p->overrun_bit = 5; 2237 else if (p->scbrr_algo_id == SCBRR_ALGO_4) 2238 p->overrun_bit = 9; 2239 else 2240 p->overrun_bit = 0; 2241 2242 /* 2243 * Make the error mask inclusive of overrun detection, if 2244 * supported. 2245 */ 2246 p->error_mask |= (1 << p->overrun_bit); 2247 } 2248 2249 port->mapbase = p->mapbase; 2250 port->type = p->type; 2251 port->flags = UPF_FIXED_PORT | p->flags; 2252 port->regshift = p->regshift; 2253 2254 /* 2255 * The UART port needs an IRQ value, so we peg this to the RX IRQ 2256 * for the multi-IRQ ports, which is where we are primarily 2257 * concerned with the shutdown path synchronization. 2258 * 2259 * For the muxed case there's nothing more to do. 2260 */ 2261 port->irq = p->irqs[SCIx_RXI_IRQ]; 2262 port->irqflags = 0; 2263 2264 port->serial_in = sci_serial_in; 2265 port->serial_out = sci_serial_out; 2266 2267 if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) 2268 dev_dbg(port->dev, "DMA tx %d, rx %d\n", 2269 p->dma_slave_tx, p->dma_slave_rx); 2270 2271 return 0; 2272 } 2273 2274 static void sci_cleanup_single(struct sci_port *port) 2275 { 2276 sci_free_gpios(port); 2277 2278 clk_put(port->iclk); 2279 clk_put(port->fclk); 2280 2281 pm_runtime_disable(port->port.dev); 2282 } 2283 2284 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE 2285 static void serial_console_putchar(struct uart_port *port, int ch) 2286 { 2287 sci_poll_put_char(port, ch); 2288 } 2289 2290 /* 2291 * Print a string to the serial port trying not to disturb 2292 * any possible real use of the port... 2293 */ 2294 static void serial_console_write(struct console *co, const char *s, 2295 unsigned count) 2296 { 2297 struct sci_port *sci_port = &sci_ports[co->index]; 2298 struct uart_port *port = &sci_port->port; 2299 unsigned short bits, ctrl; 2300 unsigned long flags; 2301 int locked = 1; 2302 2303 local_irq_save(flags); 2304 if (port->sysrq) 2305 locked = 0; 2306 else if (oops_in_progress) 2307 locked = spin_trylock(&port->lock); 2308 else 2309 spin_lock(&port->lock); 2310 2311 /* first save the SCSCR then disable the interrupts */ 2312 ctrl = serial_port_in(port, SCSCR); 2313 serial_port_out(port, SCSCR, sci_port->cfg->scscr); 2314 2315 uart_console_write(port, s, count, serial_console_putchar); 2316 2317 /* wait until fifo is empty and last bit has been transmitted */ 2318 bits = SCxSR_TDxE(port) | SCxSR_TEND(port); 2319 while ((serial_port_in(port, SCxSR) & bits) != bits) 2320 cpu_relax(); 2321 2322 /* restore the SCSCR */ 2323 serial_port_out(port, SCSCR, ctrl); 2324 2325 if (locked) 2326 spin_unlock(&port->lock); 2327 local_irq_restore(flags); 2328 } 2329 2330 static int serial_console_setup(struct console *co, char *options) 2331 { 2332 struct sci_port *sci_port; 2333 struct uart_port *port; 2334 int baud = 115200; 2335 int bits = 8; 2336 int parity = 'n'; 2337 int flow = 'n'; 2338 int ret; 2339 2340 /* 2341 * Refuse to handle any bogus ports. 2342 */ 2343 if (co->index < 0 || co->index >= SCI_NPORTS) 2344 return -ENODEV; 2345 2346 sci_port = &sci_ports[co->index]; 2347 port = &sci_port->port; 2348 2349 /* 2350 * Refuse to handle uninitialized ports. 2351 */ 2352 if (!port->ops) 2353 return -ENODEV; 2354 2355 ret = sci_remap_port(port); 2356 if (unlikely(ret != 0)) 2357 return ret; 2358 2359 if (options) 2360 uart_parse_options(options, &baud, &parity, &bits, &flow); 2361 2362 return uart_set_options(port, co, baud, parity, bits, flow); 2363 } 2364 2365 static struct console serial_console = { 2366 .name = "ttySC", 2367 .device = uart_console_device, 2368 .write = serial_console_write, 2369 .setup = serial_console_setup, 2370 .flags = CON_PRINTBUFFER, 2371 .index = -1, 2372 .data = &sci_uart_driver, 2373 }; 2374 2375 static struct console early_serial_console = { 2376 .name = "early_ttySC", 2377 .write = serial_console_write, 2378 .flags = CON_PRINTBUFFER, 2379 .index = -1, 2380 }; 2381 2382 static char early_serial_buf[32]; 2383 2384 static int sci_probe_earlyprintk(struct platform_device *pdev) 2385 { 2386 struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev); 2387 2388 if (early_serial_console.data) 2389 return -EEXIST; 2390 2391 early_serial_console.index = pdev->id; 2392 2393 sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg); 2394 2395 serial_console_setup(&early_serial_console, early_serial_buf); 2396 2397 if (!strstr(early_serial_buf, "keep")) 2398 early_serial_console.flags |= CON_BOOT; 2399 2400 register_console(&early_serial_console); 2401 return 0; 2402 } 2403 2404 #define SCI_CONSOLE (&serial_console) 2405 2406 #else 2407 static inline int sci_probe_earlyprintk(struct platform_device *pdev) 2408 { 2409 return -EINVAL; 2410 } 2411 2412 #define SCI_CONSOLE NULL 2413 2414 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ 2415 2416 static char banner[] __initdata = 2417 KERN_INFO "SuperH (H)SCI(F) driver initialized\n"; 2418 2419 static struct uart_driver sci_uart_driver = { 2420 .owner = THIS_MODULE, 2421 .driver_name = "sci", 2422 .dev_name = "ttySC", 2423 .major = SCI_MAJOR, 2424 .minor = SCI_MINOR_START, 2425 .nr = SCI_NPORTS, 2426 .cons = SCI_CONSOLE, 2427 }; 2428 2429 static int sci_remove(struct platform_device *dev) 2430 { 2431 struct sci_port *port = platform_get_drvdata(dev); 2432 2433 cpufreq_unregister_notifier(&port->freq_transition, 2434 CPUFREQ_TRANSITION_NOTIFIER); 2435 2436 uart_remove_one_port(&sci_uart_driver, &port->port); 2437 2438 sci_cleanup_single(port); 2439 2440 return 0; 2441 } 2442 2443 static int sci_probe_single(struct platform_device *dev, 2444 unsigned int index, 2445 struct plat_sci_port *p, 2446 struct sci_port *sciport) 2447 { 2448 int ret; 2449 2450 /* Sanity check */ 2451 if (unlikely(index >= SCI_NPORTS)) { 2452 dev_notice(&dev->dev, "Attempting to register port " 2453 "%d when only %d are available.\n", 2454 index+1, SCI_NPORTS); 2455 dev_notice(&dev->dev, "Consider bumping " 2456 "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); 2457 return -EINVAL; 2458 } 2459 2460 ret = sci_init_single(dev, sciport, index, p); 2461 if (ret) 2462 return ret; 2463 2464 ret = uart_add_one_port(&sci_uart_driver, &sciport->port); 2465 if (ret) { 2466 sci_cleanup_single(sciport); 2467 return ret; 2468 } 2469 2470 return 0; 2471 } 2472 2473 static int sci_probe(struct platform_device *dev) 2474 { 2475 struct plat_sci_port *p = dev_get_platdata(&dev->dev); 2476 struct sci_port *sp = &sci_ports[dev->id]; 2477 int ret; 2478 2479 /* 2480 * If we've come here via earlyprintk initialization, head off to 2481 * the special early probe. We don't have sufficient device state 2482 * to make it beyond this yet. 2483 */ 2484 if (is_early_platform_device(dev)) 2485 return sci_probe_earlyprintk(dev); 2486 2487 platform_set_drvdata(dev, sp); 2488 2489 ret = sci_probe_single(dev, dev->id, p, sp); 2490 if (ret) 2491 return ret; 2492 2493 sp->freq_transition.notifier_call = sci_notifier; 2494 2495 ret = cpufreq_register_notifier(&sp->freq_transition, 2496 CPUFREQ_TRANSITION_NOTIFIER); 2497 if (unlikely(ret < 0)) { 2498 sci_cleanup_single(sp); 2499 return ret; 2500 } 2501 2502 #ifdef CONFIG_SH_STANDARD_BIOS 2503 sh_bios_gdb_detach(); 2504 #endif 2505 2506 return 0; 2507 } 2508 2509 static int sci_suspend(struct device *dev) 2510 { 2511 struct sci_port *sport = dev_get_drvdata(dev); 2512 2513 if (sport) 2514 uart_suspend_port(&sci_uart_driver, &sport->port); 2515 2516 return 0; 2517 } 2518 2519 static int sci_resume(struct device *dev) 2520 { 2521 struct sci_port *sport = dev_get_drvdata(dev); 2522 2523 if (sport) 2524 uart_resume_port(&sci_uart_driver, &sport->port); 2525 2526 return 0; 2527 } 2528 2529 static const struct dev_pm_ops sci_dev_pm_ops = { 2530 .suspend = sci_suspend, 2531 .resume = sci_resume, 2532 }; 2533 2534 static struct platform_driver sci_driver = { 2535 .probe = sci_probe, 2536 .remove = sci_remove, 2537 .driver = { 2538 .name = "sh-sci", 2539 .owner = THIS_MODULE, 2540 .pm = &sci_dev_pm_ops, 2541 }, 2542 }; 2543 2544 static int __init sci_init(void) 2545 { 2546 int ret; 2547 2548 printk(banner); 2549 2550 ret = uart_register_driver(&sci_uart_driver); 2551 if (likely(ret == 0)) { 2552 ret = platform_driver_register(&sci_driver); 2553 if (unlikely(ret)) 2554 uart_unregister_driver(&sci_uart_driver); 2555 } 2556 2557 return ret; 2558 } 2559 2560 static void __exit sci_exit(void) 2561 { 2562 platform_driver_unregister(&sci_driver); 2563 uart_unregister_driver(&sci_uart_driver); 2564 } 2565 2566 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE 2567 early_platform_init_buffer("earlyprintk", &sci_driver, 2568 early_serial_buf, ARRAY_SIZE(early_serial_buf)); 2569 #endif 2570 module_init(sci_init); 2571 module_exit(sci_exit); 2572 2573 MODULE_LICENSE("GPL"); 2574 MODULE_ALIAS("platform:sh-sci"); 2575 MODULE_AUTHOR("Paul Mundt"); 2576 MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver"); 2577