1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Derived from many drivers using generic_serial interface, 4 * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c 5 * (was in Linux/VR tree) by Jim Pick. 6 * 7 * Copyright (C) 1999 Harald Koerfgen 8 * Copyright (C) 2000 Jim Pick <jim@jimpick.com> 9 * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) 10 * Copyright (C) 2000-2002 Toshiba Corporation 11 * 12 * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller 13 */ 14 15 #include <linux/module.h> 16 #include <linux/ioport.h> 17 #include <linux/init.h> 18 #include <linux/console.h> 19 #include <linux/delay.h> 20 #include <linux/platform_device.h> 21 #include <linux/pci.h> 22 #include <linux/serial_core.h> 23 #include <linux/serial.h> 24 #include <linux/tty.h> 25 #include <linux/tty_flip.h> 26 27 #include <linux/io.h> 28 29 static char *serial_version = "1.11"; 30 static char *serial_name = "TX39/49 Serial driver"; 31 32 #define PASS_LIMIT 256 33 34 #if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) 35 /* "ttyS" is used for standard serial driver */ 36 #define TXX9_TTY_NAME "ttyTX" 37 #define TXX9_TTY_MINOR_START 196 38 #define TXX9_TTY_MAJOR 204 39 #else 40 /* acts like standard serial driver */ 41 #define TXX9_TTY_NAME "ttyS" 42 #define TXX9_TTY_MINOR_START 64 43 #define TXX9_TTY_MAJOR TTY_MAJOR 44 #endif 45 46 /* flag aliases */ 47 #define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART 48 #define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER 49 50 #ifdef CONFIG_PCI 51 /* support for Toshiba TC86C001 SIO */ 52 #define ENABLE_SERIAL_TXX9_PCI 53 #endif 54 55 /* 56 * Number of serial ports 57 */ 58 #define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS 59 60 struct uart_txx9_port { 61 struct uart_port port; 62 /* No additional info for now */ 63 }; 64 65 #define TXX9_REGION_SIZE 0x24 66 67 /* TXX9 Serial Registers */ 68 #define TXX9_SILCR 0x00 69 #define TXX9_SIDICR 0x04 70 #define TXX9_SIDISR 0x08 71 #define TXX9_SICISR 0x0c 72 #define TXX9_SIFCR 0x10 73 #define TXX9_SIFLCR 0x14 74 #define TXX9_SIBGR 0x18 75 #define TXX9_SITFIFO 0x1c 76 #define TXX9_SIRFIFO 0x20 77 78 /* SILCR : Line Control */ 79 #define TXX9_SILCR_SCS_MASK 0x00000060 80 #define TXX9_SILCR_SCS_IMCLK 0x00000000 81 #define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 82 #define TXX9_SILCR_SCS_SCLK 0x00000040 83 #define TXX9_SILCR_SCS_SCLK_BG 0x00000060 84 #define TXX9_SILCR_UEPS 0x00000010 85 #define TXX9_SILCR_UPEN 0x00000008 86 #define TXX9_SILCR_USBL_MASK 0x00000004 87 #define TXX9_SILCR_USBL_1BIT 0x00000000 88 #define TXX9_SILCR_USBL_2BIT 0x00000004 89 #define TXX9_SILCR_UMODE_MASK 0x00000003 90 #define TXX9_SILCR_UMODE_8BIT 0x00000000 91 #define TXX9_SILCR_UMODE_7BIT 0x00000001 92 93 /* SIDICR : DMA/Int. Control */ 94 #define TXX9_SIDICR_TDE 0x00008000 95 #define TXX9_SIDICR_RDE 0x00004000 96 #define TXX9_SIDICR_TIE 0x00002000 97 #define TXX9_SIDICR_RIE 0x00001000 98 #define TXX9_SIDICR_SPIE 0x00000800 99 #define TXX9_SIDICR_CTSAC 0x00000600 100 #define TXX9_SIDICR_STIE_MASK 0x0000003f 101 #define TXX9_SIDICR_STIE_OERS 0x00000020 102 #define TXX9_SIDICR_STIE_CTSS 0x00000010 103 #define TXX9_SIDICR_STIE_RBRKD 0x00000008 104 #define TXX9_SIDICR_STIE_TRDY 0x00000004 105 #define TXX9_SIDICR_STIE_TXALS 0x00000002 106 #define TXX9_SIDICR_STIE_UBRKD 0x00000001 107 108 /* SIDISR : DMA/Int. Status */ 109 #define TXX9_SIDISR_UBRK 0x00008000 110 #define TXX9_SIDISR_UVALID 0x00004000 111 #define TXX9_SIDISR_UFER 0x00002000 112 #define TXX9_SIDISR_UPER 0x00001000 113 #define TXX9_SIDISR_UOER 0x00000800 114 #define TXX9_SIDISR_ERI 0x00000400 115 #define TXX9_SIDISR_TOUT 0x00000200 116 #define TXX9_SIDISR_TDIS 0x00000100 117 #define TXX9_SIDISR_RDIS 0x00000080 118 #define TXX9_SIDISR_STIS 0x00000040 119 #define TXX9_SIDISR_RFDN_MASK 0x0000001f 120 121 /* SICISR : Change Int. Status */ 122 #define TXX9_SICISR_OERS 0x00000020 123 #define TXX9_SICISR_CTSS 0x00000010 124 #define TXX9_SICISR_RBRKD 0x00000008 125 #define TXX9_SICISR_TRDY 0x00000004 126 #define TXX9_SICISR_TXALS 0x00000002 127 #define TXX9_SICISR_UBRKD 0x00000001 128 129 /* SIFCR : FIFO Control */ 130 #define TXX9_SIFCR_SWRST 0x00008000 131 #define TXX9_SIFCR_RDIL_MASK 0x00000180 132 #define TXX9_SIFCR_RDIL_1 0x00000000 133 #define TXX9_SIFCR_RDIL_4 0x00000080 134 #define TXX9_SIFCR_RDIL_8 0x00000100 135 #define TXX9_SIFCR_RDIL_12 0x00000180 136 #define TXX9_SIFCR_RDIL_MAX 0x00000180 137 #define TXX9_SIFCR_TDIL_MASK 0x00000018 138 #define TXX9_SIFCR_TDIL_1 0x00000000 139 #define TXX9_SIFCR_TDIL_4 0x00000001 140 #define TXX9_SIFCR_TDIL_8 0x00000010 141 #define TXX9_SIFCR_TDIL_MAX 0x00000010 142 #define TXX9_SIFCR_TFRST 0x00000004 143 #define TXX9_SIFCR_RFRST 0x00000002 144 #define TXX9_SIFCR_FRSTE 0x00000001 145 #define TXX9_SIO_TX_FIFO 8 146 #define TXX9_SIO_RX_FIFO 16 147 148 /* SIFLCR : Flow Control */ 149 #define TXX9_SIFLCR_RCS 0x00001000 150 #define TXX9_SIFLCR_TES 0x00000800 151 #define TXX9_SIFLCR_RTSSC 0x00000200 152 #define TXX9_SIFLCR_RSDE 0x00000100 153 #define TXX9_SIFLCR_TSDE 0x00000080 154 #define TXX9_SIFLCR_RTSTL_MASK 0x0000001e 155 #define TXX9_SIFLCR_RTSTL_MAX 0x0000001e 156 #define TXX9_SIFLCR_TBRK 0x00000001 157 158 /* SIBGR : Baudrate Control */ 159 #define TXX9_SIBGR_BCLK_MASK 0x00000300 160 #define TXX9_SIBGR_BCLK_T0 0x00000000 161 #define TXX9_SIBGR_BCLK_T2 0x00000100 162 #define TXX9_SIBGR_BCLK_T4 0x00000200 163 #define TXX9_SIBGR_BCLK_T6 0x00000300 164 #define TXX9_SIBGR_BRD_MASK 0x000000ff 165 166 static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) 167 { 168 switch (up->port.iotype) { 169 default: 170 return __raw_readl(up->port.membase + offset); 171 case UPIO_PORT: 172 return inl(up->port.iobase + offset); 173 } 174 } 175 176 static inline void 177 sio_out(struct uart_txx9_port *up, int offset, int value) 178 { 179 switch (up->port.iotype) { 180 default: 181 __raw_writel(value, up->port.membase + offset); 182 break; 183 case UPIO_PORT: 184 outl(value, up->port.iobase + offset); 185 break; 186 } 187 } 188 189 static inline void 190 sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) 191 { 192 sio_out(up, offset, sio_in(up, offset) & ~value); 193 } 194 static inline void 195 sio_set(struct uart_txx9_port *up, int offset, unsigned int value) 196 { 197 sio_out(up, offset, sio_in(up, offset) | value); 198 } 199 200 static inline void 201 sio_quot_set(struct uart_txx9_port *up, int quot) 202 { 203 quot >>= 1; 204 if (quot < 256) 205 sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); 206 else if (quot < (256 << 2)) 207 sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); 208 else if (quot < (256 << 4)) 209 sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); 210 else if (quot < (256 << 6)) 211 sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); 212 else 213 sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); 214 } 215 216 static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) 217 { 218 return container_of(port, struct uart_txx9_port, port); 219 } 220 221 static void serial_txx9_stop_tx(struct uart_port *port) 222 { 223 struct uart_txx9_port *up = to_uart_txx9_port(port); 224 sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); 225 } 226 227 static void serial_txx9_start_tx(struct uart_port *port) 228 { 229 struct uart_txx9_port *up = to_uart_txx9_port(port); 230 sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); 231 } 232 233 static void serial_txx9_stop_rx(struct uart_port *port) 234 { 235 struct uart_txx9_port *up = to_uart_txx9_port(port); 236 up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; 237 } 238 239 static void serial_txx9_initialize(struct uart_port *port) 240 { 241 struct uart_txx9_port *up = to_uart_txx9_port(port); 242 unsigned int tmout = 10000; 243 244 sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); 245 /* TX4925 BUG WORKAROUND. Accessing SIOC register 246 * immediately after soft reset causes bus error. */ 247 udelay(1); 248 while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) 249 udelay(1); 250 /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ 251 sio_set(up, TXX9_SIFCR, 252 TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); 253 /* initial settings */ 254 sio_out(up, TXX9_SILCR, 255 TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | 256 ((up->port.flags & UPF_TXX9_USE_SCLK) ? 257 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); 258 sio_quot_set(up, uart_get_divisor(port, 9600)); 259 sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); 260 sio_out(up, TXX9_SIDICR, 0); 261 } 262 263 static inline void 264 receive_chars(struct uart_txx9_port *up, unsigned int *status) 265 { 266 unsigned char ch; 267 unsigned int disr = *status; 268 int max_count = 256; 269 char flag; 270 unsigned int next_ignore_status_mask; 271 272 do { 273 ch = sio_in(up, TXX9_SIRFIFO); 274 flag = TTY_NORMAL; 275 up->port.icount.rx++; 276 277 /* mask out RFDN_MASK bit added by previous overrun */ 278 next_ignore_status_mask = 279 up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; 280 if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | 281 TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { 282 /* 283 * For statistics only 284 */ 285 if (disr & TXX9_SIDISR_UBRK) { 286 disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); 287 up->port.icount.brk++; 288 /* 289 * We do the SysRQ and SAK checking 290 * here because otherwise the break 291 * may get masked by ignore_status_mask 292 * or read_status_mask. 293 */ 294 if (uart_handle_break(&up->port)) 295 goto ignore_char; 296 } else if (disr & TXX9_SIDISR_UPER) 297 up->port.icount.parity++; 298 else if (disr & TXX9_SIDISR_UFER) 299 up->port.icount.frame++; 300 if (disr & TXX9_SIDISR_UOER) { 301 up->port.icount.overrun++; 302 /* 303 * The receiver read buffer still hold 304 * a char which caused overrun. 305 * Ignore next char by adding RFDN_MASK 306 * to ignore_status_mask temporarily. 307 */ 308 next_ignore_status_mask |= 309 TXX9_SIDISR_RFDN_MASK; 310 } 311 312 /* 313 * Mask off conditions which should be ingored. 314 */ 315 disr &= up->port.read_status_mask; 316 317 if (disr & TXX9_SIDISR_UBRK) { 318 flag = TTY_BREAK; 319 } else if (disr & TXX9_SIDISR_UPER) 320 flag = TTY_PARITY; 321 else if (disr & TXX9_SIDISR_UFER) 322 flag = TTY_FRAME; 323 } 324 if (uart_handle_sysrq_char(&up->port, ch)) 325 goto ignore_char; 326 327 uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); 328 329 ignore_char: 330 up->port.ignore_status_mask = next_ignore_status_mask; 331 disr = sio_in(up, TXX9_SIDISR); 332 } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); 333 334 tty_flip_buffer_push(&up->port.state->port); 335 336 *status = disr; 337 } 338 339 static inline void transmit_chars(struct uart_txx9_port *up) 340 { 341 struct circ_buf *xmit = &up->port.state->xmit; 342 int count; 343 344 if (up->port.x_char) { 345 sio_out(up, TXX9_SITFIFO, up->port.x_char); 346 up->port.icount.tx++; 347 up->port.x_char = 0; 348 return; 349 } 350 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { 351 serial_txx9_stop_tx(&up->port); 352 return; 353 } 354 355 count = TXX9_SIO_TX_FIFO; 356 do { 357 sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); 358 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 359 up->port.icount.tx++; 360 if (uart_circ_empty(xmit)) 361 break; 362 } while (--count > 0); 363 364 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 365 uart_write_wakeup(&up->port); 366 367 if (uart_circ_empty(xmit)) 368 serial_txx9_stop_tx(&up->port); 369 } 370 371 static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) 372 { 373 int pass_counter = 0; 374 struct uart_txx9_port *up = dev_id; 375 unsigned int status; 376 377 while (1) { 378 spin_lock(&up->port.lock); 379 status = sio_in(up, TXX9_SIDISR); 380 if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) 381 status &= ~TXX9_SIDISR_TDIS; 382 if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | 383 TXX9_SIDISR_TOUT))) { 384 spin_unlock(&up->port.lock); 385 break; 386 } 387 388 if (status & TXX9_SIDISR_RDIS) 389 receive_chars(up, &status); 390 if (status & TXX9_SIDISR_TDIS) 391 transmit_chars(up); 392 /* Clear TX/RX Int. Status */ 393 sio_mask(up, TXX9_SIDISR, 394 TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | 395 TXX9_SIDISR_TOUT); 396 spin_unlock(&up->port.lock); 397 398 if (pass_counter++ > PASS_LIMIT) 399 break; 400 } 401 402 return pass_counter ? IRQ_HANDLED : IRQ_NONE; 403 } 404 405 static unsigned int serial_txx9_tx_empty(struct uart_port *port) 406 { 407 struct uart_txx9_port *up = to_uart_txx9_port(port); 408 unsigned long flags; 409 unsigned int ret; 410 411 spin_lock_irqsave(&up->port.lock, flags); 412 ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; 413 spin_unlock_irqrestore(&up->port.lock, flags); 414 415 return ret; 416 } 417 418 static unsigned int serial_txx9_get_mctrl(struct uart_port *port) 419 { 420 struct uart_txx9_port *up = to_uart_txx9_port(port); 421 unsigned int ret; 422 423 /* no modem control lines */ 424 ret = TIOCM_CAR | TIOCM_DSR; 425 ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; 426 ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; 427 428 return ret; 429 } 430 431 static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) 432 { 433 struct uart_txx9_port *up = to_uart_txx9_port(port); 434 435 if (mctrl & TIOCM_RTS) 436 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); 437 else 438 sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); 439 } 440 441 static void serial_txx9_break_ctl(struct uart_port *port, int break_state) 442 { 443 struct uart_txx9_port *up = to_uart_txx9_port(port); 444 unsigned long flags; 445 446 spin_lock_irqsave(&up->port.lock, flags); 447 if (break_state == -1) 448 sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); 449 else 450 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); 451 spin_unlock_irqrestore(&up->port.lock, flags); 452 } 453 454 #if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) 455 /* 456 * Wait for transmitter & holding register to empty 457 */ 458 static void wait_for_xmitr(struct uart_txx9_port *up) 459 { 460 unsigned int tmout = 10000; 461 462 /* Wait up to 10ms for the character(s) to be sent. */ 463 while (--tmout && 464 !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) 465 udelay(1); 466 467 /* Wait up to 1s for flow control if necessary */ 468 if (up->port.flags & UPF_CONS_FLOW) { 469 tmout = 1000000; 470 while (--tmout && 471 (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) 472 udelay(1); 473 } 474 } 475 #endif 476 477 #ifdef CONFIG_CONSOLE_POLL 478 /* 479 * Console polling routines for writing and reading from the uart while 480 * in an interrupt or debug context. 481 */ 482 483 static int serial_txx9_get_poll_char(struct uart_port *port) 484 { 485 unsigned int ier; 486 unsigned char c; 487 struct uart_txx9_port *up = to_uart_txx9_port(port); 488 489 /* 490 * First save the IER then disable the interrupts 491 */ 492 ier = sio_in(up, TXX9_SIDICR); 493 sio_out(up, TXX9_SIDICR, 0); 494 495 while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) 496 ; 497 498 c = sio_in(up, TXX9_SIRFIFO); 499 500 /* 501 * Finally, clear RX interrupt status 502 * and restore the IER 503 */ 504 sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); 505 sio_out(up, TXX9_SIDICR, ier); 506 return c; 507 } 508 509 510 static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) 511 { 512 unsigned int ier; 513 struct uart_txx9_port *up = to_uart_txx9_port(port); 514 515 /* 516 * First save the IER then disable the interrupts 517 */ 518 ier = sio_in(up, TXX9_SIDICR); 519 sio_out(up, TXX9_SIDICR, 0); 520 521 wait_for_xmitr(up); 522 /* 523 * Send the character out. 524 */ 525 sio_out(up, TXX9_SITFIFO, c); 526 527 /* 528 * Finally, wait for transmitter to become empty 529 * and restore the IER 530 */ 531 wait_for_xmitr(up); 532 sio_out(up, TXX9_SIDICR, ier); 533 } 534 535 #endif /* CONFIG_CONSOLE_POLL */ 536 537 static int serial_txx9_startup(struct uart_port *port) 538 { 539 struct uart_txx9_port *up = to_uart_txx9_port(port); 540 unsigned long flags; 541 int retval; 542 543 /* 544 * Clear the FIFO buffers and disable them. 545 * (they will be reenabled in set_termios()) 546 */ 547 sio_set(up, TXX9_SIFCR, 548 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); 549 /* clear reset */ 550 sio_mask(up, TXX9_SIFCR, 551 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); 552 sio_out(up, TXX9_SIDICR, 0); 553 554 /* 555 * Clear the interrupt registers. 556 */ 557 sio_out(up, TXX9_SIDISR, 0); 558 559 retval = request_irq(up->port.irq, serial_txx9_interrupt, 560 IRQF_SHARED, "serial_txx9", up); 561 if (retval) 562 return retval; 563 564 /* 565 * Now, initialize the UART 566 */ 567 spin_lock_irqsave(&up->port.lock, flags); 568 serial_txx9_set_mctrl(&up->port, up->port.mctrl); 569 spin_unlock_irqrestore(&up->port.lock, flags); 570 571 /* Enable RX/TX */ 572 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); 573 574 /* 575 * Finally, enable interrupts. 576 */ 577 sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); 578 579 return 0; 580 } 581 582 static void serial_txx9_shutdown(struct uart_port *port) 583 { 584 struct uart_txx9_port *up = to_uart_txx9_port(port); 585 unsigned long flags; 586 587 /* 588 * Disable interrupts from this port 589 */ 590 sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ 591 592 spin_lock_irqsave(&up->port.lock, flags); 593 serial_txx9_set_mctrl(&up->port, up->port.mctrl); 594 spin_unlock_irqrestore(&up->port.lock, flags); 595 596 /* 597 * Disable break condition 598 */ 599 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); 600 601 #ifdef CONFIG_SERIAL_TXX9_CONSOLE 602 if (up->port.cons && up->port.line == up->port.cons->index) { 603 free_irq(up->port.irq, up); 604 return; 605 } 606 #endif 607 /* reset FIFOs */ 608 sio_set(up, TXX9_SIFCR, 609 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); 610 /* clear reset */ 611 sio_mask(up, TXX9_SIFCR, 612 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); 613 614 /* Disable RX/TX */ 615 sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); 616 617 free_irq(up->port.irq, up); 618 } 619 620 static void 621 serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, 622 struct ktermios *old) 623 { 624 struct uart_txx9_port *up = to_uart_txx9_port(port); 625 unsigned int cval, fcr = 0; 626 unsigned long flags; 627 unsigned int baud, quot; 628 629 /* 630 * We don't support modem control lines. 631 */ 632 termios->c_cflag &= ~(HUPCL | CMSPAR); 633 termios->c_cflag |= CLOCAL; 634 635 cval = sio_in(up, TXX9_SILCR); 636 /* byte size and parity */ 637 cval &= ~TXX9_SILCR_UMODE_MASK; 638 switch (termios->c_cflag & CSIZE) { 639 case CS7: 640 cval |= TXX9_SILCR_UMODE_7BIT; 641 break; 642 default: 643 case CS5: /* not supported */ 644 case CS6: /* not supported */ 645 case CS8: 646 cval |= TXX9_SILCR_UMODE_8BIT; 647 break; 648 } 649 650 cval &= ~TXX9_SILCR_USBL_MASK; 651 if (termios->c_cflag & CSTOPB) 652 cval |= TXX9_SILCR_USBL_2BIT; 653 else 654 cval |= TXX9_SILCR_USBL_1BIT; 655 cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); 656 if (termios->c_cflag & PARENB) 657 cval |= TXX9_SILCR_UPEN; 658 if (!(termios->c_cflag & PARODD)) 659 cval |= TXX9_SILCR_UEPS; 660 661 /* 662 * Ask the core to calculate the divisor for us. 663 */ 664 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); 665 quot = uart_get_divisor(port, baud); 666 667 /* Set up FIFOs */ 668 /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ 669 fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; 670 671 /* 672 * Ok, we're now changing the port state. Do it with 673 * interrupts disabled. 674 */ 675 spin_lock_irqsave(&up->port.lock, flags); 676 677 /* 678 * Update the per-port timeout. 679 */ 680 uart_update_timeout(port, termios->c_cflag, baud); 681 682 up->port.read_status_mask = TXX9_SIDISR_UOER | 683 TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; 684 if (termios->c_iflag & INPCK) 685 up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; 686 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 687 up->port.read_status_mask |= TXX9_SIDISR_UBRK; 688 689 /* 690 * Characteres to ignore 691 */ 692 up->port.ignore_status_mask = 0; 693 if (termios->c_iflag & IGNPAR) 694 up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; 695 if (termios->c_iflag & IGNBRK) { 696 up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; 697 /* 698 * If we're ignoring parity and break indicators, 699 * ignore overruns too (for real raw support). 700 */ 701 if (termios->c_iflag & IGNPAR) 702 up->port.ignore_status_mask |= TXX9_SIDISR_UOER; 703 } 704 705 /* 706 * ignore all characters if CREAD is not set 707 */ 708 if ((termios->c_cflag & CREAD) == 0) 709 up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; 710 711 /* CTS flow control flag */ 712 if ((termios->c_cflag & CRTSCTS) && 713 (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { 714 sio_set(up, TXX9_SIFLCR, 715 TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); 716 } else { 717 sio_mask(up, TXX9_SIFLCR, 718 TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); 719 } 720 721 sio_out(up, TXX9_SILCR, cval); 722 sio_quot_set(up, quot); 723 sio_out(up, TXX9_SIFCR, fcr); 724 725 serial_txx9_set_mctrl(&up->port, up->port.mctrl); 726 spin_unlock_irqrestore(&up->port.lock, flags); 727 } 728 729 static void 730 serial_txx9_pm(struct uart_port *port, unsigned int state, 731 unsigned int oldstate) 732 { 733 /* 734 * If oldstate was -1 this is called from 735 * uart_configure_port(). In this case do not initialize the 736 * port now, because the port was already initialized (for 737 * non-console port) or should not be initialized here (for 738 * console port). If we initialized the port here we lose 739 * serial console settings. 740 */ 741 if (state == 0 && oldstate != -1) 742 serial_txx9_initialize(port); 743 } 744 745 static int serial_txx9_request_resource(struct uart_txx9_port *up) 746 { 747 unsigned int size = TXX9_REGION_SIZE; 748 int ret = 0; 749 750 switch (up->port.iotype) { 751 default: 752 if (!up->port.mapbase) 753 break; 754 755 if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { 756 ret = -EBUSY; 757 break; 758 } 759 760 if (up->port.flags & UPF_IOREMAP) { 761 up->port.membase = ioremap(up->port.mapbase, size); 762 if (!up->port.membase) { 763 release_mem_region(up->port.mapbase, size); 764 ret = -ENOMEM; 765 } 766 } 767 break; 768 769 case UPIO_PORT: 770 if (!request_region(up->port.iobase, size, "serial_txx9")) 771 ret = -EBUSY; 772 break; 773 } 774 return ret; 775 } 776 777 static void serial_txx9_release_resource(struct uart_txx9_port *up) 778 { 779 unsigned int size = TXX9_REGION_SIZE; 780 781 switch (up->port.iotype) { 782 default: 783 if (!up->port.mapbase) 784 break; 785 786 if (up->port.flags & UPF_IOREMAP) { 787 iounmap(up->port.membase); 788 up->port.membase = NULL; 789 } 790 791 release_mem_region(up->port.mapbase, size); 792 break; 793 794 case UPIO_PORT: 795 release_region(up->port.iobase, size); 796 break; 797 } 798 } 799 800 static void serial_txx9_release_port(struct uart_port *port) 801 { 802 struct uart_txx9_port *up = to_uart_txx9_port(port); 803 serial_txx9_release_resource(up); 804 } 805 806 static int serial_txx9_request_port(struct uart_port *port) 807 { 808 struct uart_txx9_port *up = to_uart_txx9_port(port); 809 return serial_txx9_request_resource(up); 810 } 811 812 static void serial_txx9_config_port(struct uart_port *port, int uflags) 813 { 814 struct uart_txx9_port *up = to_uart_txx9_port(port); 815 int ret; 816 817 /* 818 * Find the region that we can probe for. This in turn 819 * tells us whether we can probe for the type of port. 820 */ 821 ret = serial_txx9_request_resource(up); 822 if (ret < 0) 823 return; 824 port->type = PORT_TXX9; 825 up->port.fifosize = TXX9_SIO_TX_FIFO; 826 827 #ifdef CONFIG_SERIAL_TXX9_CONSOLE 828 if (up->port.line == up->port.cons->index) 829 return; 830 #endif 831 serial_txx9_initialize(port); 832 } 833 834 static const char * 835 serial_txx9_type(struct uart_port *port) 836 { 837 return "txx9"; 838 } 839 840 static const struct uart_ops serial_txx9_pops = { 841 .tx_empty = serial_txx9_tx_empty, 842 .set_mctrl = serial_txx9_set_mctrl, 843 .get_mctrl = serial_txx9_get_mctrl, 844 .stop_tx = serial_txx9_stop_tx, 845 .start_tx = serial_txx9_start_tx, 846 .stop_rx = serial_txx9_stop_rx, 847 .break_ctl = serial_txx9_break_ctl, 848 .startup = serial_txx9_startup, 849 .shutdown = serial_txx9_shutdown, 850 .set_termios = serial_txx9_set_termios, 851 .pm = serial_txx9_pm, 852 .type = serial_txx9_type, 853 .release_port = serial_txx9_release_port, 854 .request_port = serial_txx9_request_port, 855 .config_port = serial_txx9_config_port, 856 #ifdef CONFIG_CONSOLE_POLL 857 .poll_get_char = serial_txx9_get_poll_char, 858 .poll_put_char = serial_txx9_put_poll_char, 859 #endif 860 }; 861 862 static struct uart_txx9_port serial_txx9_ports[UART_NR]; 863 864 static void __init serial_txx9_register_ports(struct uart_driver *drv, 865 struct device *dev) 866 { 867 int i; 868 869 for (i = 0; i < UART_NR; i++) { 870 struct uart_txx9_port *up = &serial_txx9_ports[i]; 871 872 up->port.line = i; 873 up->port.ops = &serial_txx9_pops; 874 up->port.dev = dev; 875 if (up->port.iobase || up->port.mapbase) 876 uart_add_one_port(drv, &up->port); 877 } 878 } 879 880 #ifdef CONFIG_SERIAL_TXX9_CONSOLE 881 882 static void serial_txx9_console_putchar(struct uart_port *port, int ch) 883 { 884 struct uart_txx9_port *up = to_uart_txx9_port(port); 885 886 wait_for_xmitr(up); 887 sio_out(up, TXX9_SITFIFO, ch); 888 } 889 890 /* 891 * Print a string to the serial port trying not to disturb 892 * any possible real use of the port... 893 * 894 * The console_lock must be held when we get here. 895 */ 896 static void 897 serial_txx9_console_write(struct console *co, const char *s, unsigned int count) 898 { 899 struct uart_txx9_port *up = &serial_txx9_ports[co->index]; 900 unsigned int ier, flcr; 901 902 /* 903 * First save the UER then disable the interrupts 904 */ 905 ier = sio_in(up, TXX9_SIDICR); 906 sio_out(up, TXX9_SIDICR, 0); 907 /* 908 * Disable flow-control if enabled (and unnecessary) 909 */ 910 flcr = sio_in(up, TXX9_SIFLCR); 911 if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) 912 sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); 913 914 uart_console_write(&up->port, s, count, serial_txx9_console_putchar); 915 916 /* 917 * Finally, wait for transmitter to become empty 918 * and restore the IER 919 */ 920 wait_for_xmitr(up); 921 sio_out(up, TXX9_SIFLCR, flcr); 922 sio_out(up, TXX9_SIDICR, ier); 923 } 924 925 static int __init serial_txx9_console_setup(struct console *co, char *options) 926 { 927 struct uart_port *port; 928 struct uart_txx9_port *up; 929 int baud = 9600; 930 int bits = 8; 931 int parity = 'n'; 932 int flow = 'n'; 933 934 /* 935 * Check whether an invalid uart number has been specified, and 936 * if so, search for the first available port that does have 937 * console support. 938 */ 939 if (co->index >= UART_NR) 940 co->index = 0; 941 up = &serial_txx9_ports[co->index]; 942 port = &up->port; 943 if (!port->ops) 944 return -ENODEV; 945 946 serial_txx9_initialize(&up->port); 947 948 if (options) 949 uart_parse_options(options, &baud, &parity, &bits, &flow); 950 951 return uart_set_options(port, co, baud, parity, bits, flow); 952 } 953 954 static struct uart_driver serial_txx9_reg; 955 static struct console serial_txx9_console = { 956 .name = TXX9_TTY_NAME, 957 .write = serial_txx9_console_write, 958 .device = uart_console_device, 959 .setup = serial_txx9_console_setup, 960 .flags = CON_PRINTBUFFER, 961 .index = -1, 962 .data = &serial_txx9_reg, 963 }; 964 965 static int __init serial_txx9_console_init(void) 966 { 967 register_console(&serial_txx9_console); 968 return 0; 969 } 970 console_initcall(serial_txx9_console_init); 971 972 #define SERIAL_TXX9_CONSOLE &serial_txx9_console 973 #else 974 #define SERIAL_TXX9_CONSOLE NULL 975 #endif 976 977 static struct uart_driver serial_txx9_reg = { 978 .owner = THIS_MODULE, 979 .driver_name = "serial_txx9", 980 .dev_name = TXX9_TTY_NAME, 981 .major = TXX9_TTY_MAJOR, 982 .minor = TXX9_TTY_MINOR_START, 983 .nr = UART_NR, 984 .cons = SERIAL_TXX9_CONSOLE, 985 }; 986 987 int __init early_serial_txx9_setup(struct uart_port *port) 988 { 989 if (port->line >= ARRAY_SIZE(serial_txx9_ports)) 990 return -ENODEV; 991 992 serial_txx9_ports[port->line].port = *port; 993 serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; 994 serial_txx9_ports[port->line].port.flags |= 995 UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; 996 return 0; 997 } 998 999 static DEFINE_MUTEX(serial_txx9_mutex); 1000 1001 /** 1002 * serial_txx9_register_port - register a serial port 1003 * @port: serial port template 1004 * 1005 * Configure the serial port specified by the request. 1006 * 1007 * The port is then probed and if necessary the IRQ is autodetected 1008 * If this fails an error is returned. 1009 * 1010 * On success the port is ready to use and the line number is returned. 1011 */ 1012 static int serial_txx9_register_port(struct uart_port *port) 1013 { 1014 int i; 1015 struct uart_txx9_port *uart; 1016 int ret = -ENOSPC; 1017 1018 mutex_lock(&serial_txx9_mutex); 1019 for (i = 0; i < UART_NR; i++) { 1020 uart = &serial_txx9_ports[i]; 1021 if (uart_match_port(&uart->port, port)) { 1022 uart_remove_one_port(&serial_txx9_reg, &uart->port); 1023 break; 1024 } 1025 } 1026 if (i == UART_NR) { 1027 /* Find unused port */ 1028 for (i = 0; i < UART_NR; i++) { 1029 uart = &serial_txx9_ports[i]; 1030 if (!(uart->port.iobase || uart->port.mapbase)) 1031 break; 1032 } 1033 } 1034 if (i < UART_NR) { 1035 uart->port.iobase = port->iobase; 1036 uart->port.membase = port->membase; 1037 uart->port.irq = port->irq; 1038 uart->port.uartclk = port->uartclk; 1039 uart->port.iotype = port->iotype; 1040 uart->port.flags = port->flags 1041 | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; 1042 uart->port.mapbase = port->mapbase; 1043 if (port->dev) 1044 uart->port.dev = port->dev; 1045 ret = uart_add_one_port(&serial_txx9_reg, &uart->port); 1046 if (ret == 0) 1047 ret = uart->port.line; 1048 } 1049 mutex_unlock(&serial_txx9_mutex); 1050 return ret; 1051 } 1052 1053 /** 1054 * serial_txx9_unregister_port - remove a txx9 serial port at runtime 1055 * @line: serial line number 1056 * 1057 * Remove one serial port. This may not be called from interrupt 1058 * context. We hand the port back to the our control. 1059 */ 1060 static void serial_txx9_unregister_port(int line) 1061 { 1062 struct uart_txx9_port *uart = &serial_txx9_ports[line]; 1063 1064 mutex_lock(&serial_txx9_mutex); 1065 uart_remove_one_port(&serial_txx9_reg, &uart->port); 1066 uart->port.flags = 0; 1067 uart->port.type = PORT_UNKNOWN; 1068 uart->port.iobase = 0; 1069 uart->port.mapbase = 0; 1070 uart->port.membase = NULL; 1071 uart->port.dev = NULL; 1072 mutex_unlock(&serial_txx9_mutex); 1073 } 1074 1075 /* 1076 * Register a set of serial devices attached to a platform device. 1077 */ 1078 static int serial_txx9_probe(struct platform_device *dev) 1079 { 1080 struct uart_port *p = dev_get_platdata(&dev->dev); 1081 struct uart_port port; 1082 int ret, i; 1083 1084 memset(&port, 0, sizeof(struct uart_port)); 1085 for (i = 0; p && p->uartclk != 0; p++, i++) { 1086 port.iobase = p->iobase; 1087 port.membase = p->membase; 1088 port.irq = p->irq; 1089 port.uartclk = p->uartclk; 1090 port.iotype = p->iotype; 1091 port.flags = p->flags; 1092 port.mapbase = p->mapbase; 1093 port.dev = &dev->dev; 1094 port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_TXX9_CONSOLE); 1095 ret = serial_txx9_register_port(&port); 1096 if (ret < 0) { 1097 dev_err(&dev->dev, "unable to register port at index %d " 1098 "(IO%lx MEM%llx IRQ%d): %d\n", i, 1099 p->iobase, (unsigned long long)p->mapbase, 1100 p->irq, ret); 1101 } 1102 } 1103 return 0; 1104 } 1105 1106 /* 1107 * Remove serial ports registered against a platform device. 1108 */ 1109 static int serial_txx9_remove(struct platform_device *dev) 1110 { 1111 int i; 1112 1113 for (i = 0; i < UART_NR; i++) { 1114 struct uart_txx9_port *up = &serial_txx9_ports[i]; 1115 1116 if (up->port.dev == &dev->dev) 1117 serial_txx9_unregister_port(i); 1118 } 1119 return 0; 1120 } 1121 1122 #ifdef CONFIG_PM 1123 static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) 1124 { 1125 int i; 1126 1127 for (i = 0; i < UART_NR; i++) { 1128 struct uart_txx9_port *up = &serial_txx9_ports[i]; 1129 1130 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) 1131 uart_suspend_port(&serial_txx9_reg, &up->port); 1132 } 1133 1134 return 0; 1135 } 1136 1137 static int serial_txx9_resume(struct platform_device *dev) 1138 { 1139 int i; 1140 1141 for (i = 0; i < UART_NR; i++) { 1142 struct uart_txx9_port *up = &serial_txx9_ports[i]; 1143 1144 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) 1145 uart_resume_port(&serial_txx9_reg, &up->port); 1146 } 1147 1148 return 0; 1149 } 1150 #endif 1151 1152 static struct platform_driver serial_txx9_plat_driver = { 1153 .probe = serial_txx9_probe, 1154 .remove = serial_txx9_remove, 1155 #ifdef CONFIG_PM 1156 .suspend = serial_txx9_suspend, 1157 .resume = serial_txx9_resume, 1158 #endif 1159 .driver = { 1160 .name = "serial_txx9", 1161 }, 1162 }; 1163 1164 #ifdef ENABLE_SERIAL_TXX9_PCI 1165 /* 1166 * Probe one serial board. Unfortunately, there is no rhyme nor reason 1167 * to the arrangement of serial ports on a PCI card. 1168 */ 1169 static int 1170 pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) 1171 { 1172 struct uart_port port; 1173 int line; 1174 int rc; 1175 1176 rc = pci_enable_device(dev); 1177 if (rc) 1178 return rc; 1179 1180 memset(&port, 0, sizeof(port)); 1181 port.ops = &serial_txx9_pops; 1182 port.flags |= UPF_TXX9_HAVE_CTS_LINE; 1183 port.uartclk = 66670000; 1184 port.irq = dev->irq; 1185 port.iotype = UPIO_PORT; 1186 port.iobase = pci_resource_start(dev, 1); 1187 port.dev = &dev->dev; 1188 line = serial_txx9_register_port(&port); 1189 if (line < 0) { 1190 printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); 1191 pci_disable_device(dev); 1192 return line; 1193 } 1194 pci_set_drvdata(dev, &serial_txx9_ports[line]); 1195 1196 return 0; 1197 } 1198 1199 static void pciserial_txx9_remove_one(struct pci_dev *dev) 1200 { 1201 struct uart_txx9_port *up = pci_get_drvdata(dev); 1202 1203 if (up) { 1204 serial_txx9_unregister_port(up->port.line); 1205 pci_disable_device(dev); 1206 } 1207 } 1208 1209 #ifdef CONFIG_PM 1210 static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) 1211 { 1212 struct uart_txx9_port *up = pci_get_drvdata(dev); 1213 1214 if (up) 1215 uart_suspend_port(&serial_txx9_reg, &up->port); 1216 pci_save_state(dev); 1217 pci_set_power_state(dev, pci_choose_state(dev, state)); 1218 return 0; 1219 } 1220 1221 static int pciserial_txx9_resume_one(struct pci_dev *dev) 1222 { 1223 struct uart_txx9_port *up = pci_get_drvdata(dev); 1224 1225 pci_set_power_state(dev, PCI_D0); 1226 pci_restore_state(dev); 1227 if (up) 1228 uart_resume_port(&serial_txx9_reg, &up->port); 1229 return 0; 1230 } 1231 #endif 1232 1233 static const struct pci_device_id serial_txx9_pci_tbl[] = { 1234 { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, 1235 { 0, } 1236 }; 1237 1238 static struct pci_driver serial_txx9_pci_driver = { 1239 .name = "serial_txx9", 1240 .probe = pciserial_txx9_init_one, 1241 .remove = pciserial_txx9_remove_one, 1242 #ifdef CONFIG_PM 1243 .suspend = pciserial_txx9_suspend_one, 1244 .resume = pciserial_txx9_resume_one, 1245 #endif 1246 .id_table = serial_txx9_pci_tbl, 1247 }; 1248 1249 MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); 1250 #endif /* ENABLE_SERIAL_TXX9_PCI */ 1251 1252 static struct platform_device *serial_txx9_plat_devs; 1253 1254 static int __init serial_txx9_init(void) 1255 { 1256 int ret; 1257 1258 printk(KERN_INFO "%s version %s\n", serial_name, serial_version); 1259 1260 ret = uart_register_driver(&serial_txx9_reg); 1261 if (ret) 1262 goto out; 1263 1264 serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); 1265 if (!serial_txx9_plat_devs) { 1266 ret = -ENOMEM; 1267 goto unreg_uart_drv; 1268 } 1269 1270 ret = platform_device_add(serial_txx9_plat_devs); 1271 if (ret) 1272 goto put_dev; 1273 1274 serial_txx9_register_ports(&serial_txx9_reg, 1275 &serial_txx9_plat_devs->dev); 1276 1277 ret = platform_driver_register(&serial_txx9_plat_driver); 1278 if (ret) 1279 goto del_dev; 1280 1281 #ifdef ENABLE_SERIAL_TXX9_PCI 1282 ret = pci_register_driver(&serial_txx9_pci_driver); 1283 if (ret) { 1284 platform_driver_unregister(&serial_txx9_plat_driver); 1285 } 1286 #endif 1287 if (ret == 0) 1288 goto out; 1289 1290 del_dev: 1291 platform_device_del(serial_txx9_plat_devs); 1292 put_dev: 1293 platform_device_put(serial_txx9_plat_devs); 1294 unreg_uart_drv: 1295 uart_unregister_driver(&serial_txx9_reg); 1296 out: 1297 return ret; 1298 } 1299 1300 static void __exit serial_txx9_exit(void) 1301 { 1302 int i; 1303 1304 #ifdef ENABLE_SERIAL_TXX9_PCI 1305 pci_unregister_driver(&serial_txx9_pci_driver); 1306 #endif 1307 platform_driver_unregister(&serial_txx9_plat_driver); 1308 platform_device_unregister(serial_txx9_plat_devs); 1309 for (i = 0; i < UART_NR; i++) { 1310 struct uart_txx9_port *up = &serial_txx9_ports[i]; 1311 if (up->port.iobase || up->port.mapbase) 1312 uart_remove_one_port(&serial_txx9_reg, &up->port); 1313 } 1314 1315 uart_unregister_driver(&serial_txx9_reg); 1316 } 1317 1318 module_init(serial_txx9_init); 1319 module_exit(serial_txx9_exit); 1320 1321 MODULE_LICENSE("GPL"); 1322 MODULE_DESCRIPTION("TX39/49 serial driver"); 1323 1324 MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); 1325