1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * serial_tegra.c 4 * 5 * High-speed serial driver for NVIDIA Tegra SoCs 6 * 7 * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. 8 * 9 * Author: Laxman Dewangan <ldewangan@nvidia.com> 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/debugfs.h> 14 #include <linux/delay.h> 15 #include <linux/dmaengine.h> 16 #include <linux/dma-mapping.h> 17 #include <linux/dmapool.h> 18 #include <linux/err.h> 19 #include <linux/io.h> 20 #include <linux/irq.h> 21 #include <linux/module.h> 22 #include <linux/of.h> 23 #include <linux/of_device.h> 24 #include <linux/pagemap.h> 25 #include <linux/platform_device.h> 26 #include <linux/reset.h> 27 #include <linux/serial.h> 28 #include <linux/serial_8250.h> 29 #include <linux/serial_core.h> 30 #include <linux/serial_reg.h> 31 #include <linux/slab.h> 32 #include <linux/string.h> 33 #include <linux/termios.h> 34 #include <linux/tty.h> 35 #include <linux/tty_flip.h> 36 37 #define TEGRA_UART_TYPE "TEGRA_UART" 38 #define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE) 39 #define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3) 40 41 #define TEGRA_UART_RX_DMA_BUFFER_SIZE 4096 42 #define TEGRA_UART_LSR_TXFIFO_FULL 0x100 43 #define TEGRA_UART_IER_EORD 0x20 44 #define TEGRA_UART_MCR_RTS_EN 0x40 45 #define TEGRA_UART_MCR_CTS_EN 0x20 46 #define TEGRA_UART_LSR_ANY (UART_LSR_OE | UART_LSR_BI | \ 47 UART_LSR_PE | UART_LSR_FE) 48 #define TEGRA_UART_IRDA_CSR 0x08 49 #define TEGRA_UART_SIR_ENABLED 0x80 50 51 #define TEGRA_UART_TX_PIO 1 52 #define TEGRA_UART_TX_DMA 2 53 #define TEGRA_UART_MIN_DMA 16 54 #define TEGRA_UART_FIFO_SIZE 32 55 56 /* 57 * Tx fifo trigger level setting in tegra uart is in 58 * reverse way then conventional uart. 59 */ 60 #define TEGRA_UART_TX_TRIG_16B 0x00 61 #define TEGRA_UART_TX_TRIG_8B 0x10 62 #define TEGRA_UART_TX_TRIG_4B 0x20 63 #define TEGRA_UART_TX_TRIG_1B 0x30 64 65 #define TEGRA_UART_MAXIMUM 5 66 67 /* Default UART setting when started: 115200 no parity, stop, 8 data bits */ 68 #define TEGRA_UART_DEFAULT_BAUD 115200 69 #define TEGRA_UART_DEFAULT_LSR UART_LCR_WLEN8 70 71 /* Tx transfer mode */ 72 #define TEGRA_TX_PIO 1 73 #define TEGRA_TX_DMA 2 74 75 /** 76 * tegra_uart_chip_data: SOC specific data. 77 * 78 * @tx_fifo_full_status: Status flag available for checking tx fifo full. 79 * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not. 80 * Tegra30 does not allow this. 81 * @support_clk_src_div: Clock source support the clock divider. 82 */ 83 struct tegra_uart_chip_data { 84 bool tx_fifo_full_status; 85 bool allow_txfifo_reset_fifo_mode; 86 bool support_clk_src_div; 87 }; 88 89 struct tegra_uart_port { 90 struct uart_port uport; 91 const struct tegra_uart_chip_data *cdata; 92 93 struct clk *uart_clk; 94 struct reset_control *rst; 95 unsigned int current_baud; 96 97 /* Register shadow */ 98 unsigned long fcr_shadow; 99 unsigned long mcr_shadow; 100 unsigned long lcr_shadow; 101 unsigned long ier_shadow; 102 bool rts_active; 103 104 int tx_in_progress; 105 unsigned int tx_bytes; 106 107 bool enable_modem_interrupt; 108 109 bool rx_timeout; 110 int rx_in_progress; 111 int symb_bit; 112 113 struct dma_chan *rx_dma_chan; 114 struct dma_chan *tx_dma_chan; 115 dma_addr_t rx_dma_buf_phys; 116 dma_addr_t tx_dma_buf_phys; 117 unsigned char *rx_dma_buf_virt; 118 unsigned char *tx_dma_buf_virt; 119 struct dma_async_tx_descriptor *tx_dma_desc; 120 struct dma_async_tx_descriptor *rx_dma_desc; 121 dma_cookie_t tx_cookie; 122 dma_cookie_t rx_cookie; 123 unsigned int tx_bytes_requested; 124 unsigned int rx_bytes_requested; 125 }; 126 127 static void tegra_uart_start_next_tx(struct tegra_uart_port *tup); 128 static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup); 129 130 static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup, 131 unsigned long reg) 132 { 133 return readl(tup->uport.membase + (reg << tup->uport.regshift)); 134 } 135 136 static inline void tegra_uart_write(struct tegra_uart_port *tup, unsigned val, 137 unsigned long reg) 138 { 139 writel(val, tup->uport.membase + (reg << tup->uport.regshift)); 140 } 141 142 static inline struct tegra_uart_port *to_tegra_uport(struct uart_port *u) 143 { 144 return container_of(u, struct tegra_uart_port, uport); 145 } 146 147 static unsigned int tegra_uart_get_mctrl(struct uart_port *u) 148 { 149 struct tegra_uart_port *tup = to_tegra_uport(u); 150 151 /* 152 * RI - Ring detector is active 153 * CD/DCD/CAR - Carrier detect is always active. For some reason 154 * linux has different names for carrier detect. 155 * DSR - Data Set ready is active as the hardware doesn't support it. 156 * Don't know if the linux support this yet? 157 * CTS - Clear to send. Always set to active, as the hardware handles 158 * CTS automatically. 159 */ 160 if (tup->enable_modem_interrupt) 161 return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS; 162 return TIOCM_CTS; 163 } 164 165 static void set_rts(struct tegra_uart_port *tup, bool active) 166 { 167 unsigned long mcr; 168 169 mcr = tup->mcr_shadow; 170 if (active) 171 mcr |= TEGRA_UART_MCR_RTS_EN; 172 else 173 mcr &= ~TEGRA_UART_MCR_RTS_EN; 174 if (mcr != tup->mcr_shadow) { 175 tegra_uart_write(tup, mcr, UART_MCR); 176 tup->mcr_shadow = mcr; 177 } 178 } 179 180 static void set_dtr(struct tegra_uart_port *tup, bool active) 181 { 182 unsigned long mcr; 183 184 mcr = tup->mcr_shadow; 185 if (active) 186 mcr |= UART_MCR_DTR; 187 else 188 mcr &= ~UART_MCR_DTR; 189 if (mcr != tup->mcr_shadow) { 190 tegra_uart_write(tup, mcr, UART_MCR); 191 tup->mcr_shadow = mcr; 192 } 193 } 194 195 static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl) 196 { 197 struct tegra_uart_port *tup = to_tegra_uport(u); 198 int dtr_enable; 199 200 tup->rts_active = !!(mctrl & TIOCM_RTS); 201 set_rts(tup, tup->rts_active); 202 203 dtr_enable = !!(mctrl & TIOCM_DTR); 204 set_dtr(tup, dtr_enable); 205 } 206 207 static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl) 208 { 209 struct tegra_uart_port *tup = to_tegra_uport(u); 210 unsigned long lcr; 211 212 lcr = tup->lcr_shadow; 213 if (break_ctl) 214 lcr |= UART_LCR_SBC; 215 else 216 lcr &= ~UART_LCR_SBC; 217 tegra_uart_write(tup, lcr, UART_LCR); 218 tup->lcr_shadow = lcr; 219 } 220 221 /** 222 * tegra_uart_wait_cycle_time: Wait for N UART clock periods 223 * 224 * @tup: Tegra serial port data structure. 225 * @cycles: Number of clock periods to wait. 226 * 227 * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART 228 * clock speed is 16X the current baud rate. 229 */ 230 static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup, 231 unsigned int cycles) 232 { 233 if (tup->current_baud) 234 udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16)); 235 } 236 237 /* Wait for a symbol-time. */ 238 static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup, 239 unsigned int syms) 240 { 241 if (tup->current_baud) 242 udelay(DIV_ROUND_UP(syms * tup->symb_bit * 1000000, 243 tup->current_baud)); 244 } 245 246 static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) 247 { 248 unsigned long fcr = tup->fcr_shadow; 249 250 if (tup->cdata->allow_txfifo_reset_fifo_mode) { 251 fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); 252 tegra_uart_write(tup, fcr, UART_FCR); 253 } else { 254 fcr &= ~UART_FCR_ENABLE_FIFO; 255 tegra_uart_write(tup, fcr, UART_FCR); 256 udelay(60); 257 fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); 258 tegra_uart_write(tup, fcr, UART_FCR); 259 fcr |= UART_FCR_ENABLE_FIFO; 260 tegra_uart_write(tup, fcr, UART_FCR); 261 } 262 263 /* Dummy read to ensure the write is posted */ 264 tegra_uart_read(tup, UART_SCR); 265 266 /* 267 * For all tegra devices (up to t210), there is a hardware issue that 268 * requires software to wait for 32 UART clock periods for the flush 269 * to propagate, otherwise data could be lost. 270 */ 271 tegra_uart_wait_cycle_time(tup, 32); 272 } 273 274 static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud) 275 { 276 unsigned long rate; 277 unsigned int divisor; 278 unsigned long lcr; 279 int ret; 280 281 if (tup->current_baud == baud) 282 return 0; 283 284 if (tup->cdata->support_clk_src_div) { 285 rate = baud * 16; 286 ret = clk_set_rate(tup->uart_clk, rate); 287 if (ret < 0) { 288 dev_err(tup->uport.dev, 289 "clk_set_rate() failed for rate %lu\n", rate); 290 return ret; 291 } 292 divisor = 1; 293 } else { 294 rate = clk_get_rate(tup->uart_clk); 295 divisor = DIV_ROUND_CLOSEST(rate, baud * 16); 296 } 297 298 lcr = tup->lcr_shadow; 299 lcr |= UART_LCR_DLAB; 300 tegra_uart_write(tup, lcr, UART_LCR); 301 302 tegra_uart_write(tup, divisor & 0xFF, UART_TX); 303 tegra_uart_write(tup, ((divisor >> 8) & 0xFF), UART_IER); 304 305 lcr &= ~UART_LCR_DLAB; 306 tegra_uart_write(tup, lcr, UART_LCR); 307 308 /* Dummy read to ensure the write is posted */ 309 tegra_uart_read(tup, UART_SCR); 310 311 tup->current_baud = baud; 312 313 /* wait two character intervals at new rate */ 314 tegra_uart_wait_sym_time(tup, 2); 315 return 0; 316 } 317 318 static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup, 319 unsigned long lsr) 320 { 321 char flag = TTY_NORMAL; 322 323 if (unlikely(lsr & TEGRA_UART_LSR_ANY)) { 324 if (lsr & UART_LSR_OE) { 325 /* Overrrun error */ 326 flag = TTY_OVERRUN; 327 tup->uport.icount.overrun++; 328 dev_err(tup->uport.dev, "Got overrun errors\n"); 329 } else if (lsr & UART_LSR_PE) { 330 /* Parity error */ 331 flag = TTY_PARITY; 332 tup->uport.icount.parity++; 333 dev_err(tup->uport.dev, "Got Parity errors\n"); 334 } else if (lsr & UART_LSR_FE) { 335 flag = TTY_FRAME; 336 tup->uport.icount.frame++; 337 dev_err(tup->uport.dev, "Got frame errors\n"); 338 } else if (lsr & UART_LSR_BI) { 339 dev_err(tup->uport.dev, "Got Break\n"); 340 tup->uport.icount.brk++; 341 /* If FIFO read error without any data, reset Rx FIFO */ 342 if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE)) 343 tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR); 344 } 345 } 346 return flag; 347 } 348 349 static int tegra_uart_request_port(struct uart_port *u) 350 { 351 return 0; 352 } 353 354 static void tegra_uart_release_port(struct uart_port *u) 355 { 356 /* Nothing to do here */ 357 } 358 359 static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes) 360 { 361 struct circ_buf *xmit = &tup->uport.state->xmit; 362 int i; 363 364 for (i = 0; i < max_bytes; i++) { 365 BUG_ON(uart_circ_empty(xmit)); 366 if (tup->cdata->tx_fifo_full_status) { 367 unsigned long lsr = tegra_uart_read(tup, UART_LSR); 368 if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL)) 369 break; 370 } 371 tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX); 372 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 373 tup->uport.icount.tx++; 374 } 375 } 376 377 static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup, 378 unsigned int bytes) 379 { 380 if (bytes > TEGRA_UART_MIN_DMA) 381 bytes = TEGRA_UART_MIN_DMA; 382 383 tup->tx_in_progress = TEGRA_UART_TX_PIO; 384 tup->tx_bytes = bytes; 385 tup->ier_shadow |= UART_IER_THRI; 386 tegra_uart_write(tup, tup->ier_shadow, UART_IER); 387 } 388 389 static void tegra_uart_tx_dma_complete(void *args) 390 { 391 struct tegra_uart_port *tup = args; 392 struct circ_buf *xmit = &tup->uport.state->xmit; 393 struct dma_tx_state state; 394 unsigned long flags; 395 unsigned int count; 396 397 dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); 398 count = tup->tx_bytes_requested - state.residue; 399 async_tx_ack(tup->tx_dma_desc); 400 spin_lock_irqsave(&tup->uport.lock, flags); 401 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); 402 tup->tx_in_progress = 0; 403 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 404 uart_write_wakeup(&tup->uport); 405 tegra_uart_start_next_tx(tup); 406 spin_unlock_irqrestore(&tup->uport.lock, flags); 407 } 408 409 static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup, 410 unsigned long count) 411 { 412 struct circ_buf *xmit = &tup->uport.state->xmit; 413 dma_addr_t tx_phys_addr; 414 415 dma_sync_single_for_device(tup->uport.dev, tup->tx_dma_buf_phys, 416 UART_XMIT_SIZE, DMA_TO_DEVICE); 417 418 tup->tx_bytes = count & ~(0xF); 419 tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail; 420 tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan, 421 tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV, 422 DMA_PREP_INTERRUPT); 423 if (!tup->tx_dma_desc) { 424 dev_err(tup->uport.dev, "Not able to get desc for Tx\n"); 425 return -EIO; 426 } 427 428 tup->tx_dma_desc->callback = tegra_uart_tx_dma_complete; 429 tup->tx_dma_desc->callback_param = tup; 430 tup->tx_in_progress = TEGRA_UART_TX_DMA; 431 tup->tx_bytes_requested = tup->tx_bytes; 432 tup->tx_cookie = dmaengine_submit(tup->tx_dma_desc); 433 dma_async_issue_pending(tup->tx_dma_chan); 434 return 0; 435 } 436 437 static void tegra_uart_start_next_tx(struct tegra_uart_port *tup) 438 { 439 unsigned long tail; 440 unsigned long count; 441 struct circ_buf *xmit = &tup->uport.state->xmit; 442 443 tail = (unsigned long)&xmit->buf[xmit->tail]; 444 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 445 if (!count) 446 return; 447 448 if (count < TEGRA_UART_MIN_DMA) 449 tegra_uart_start_pio_tx(tup, count); 450 else if (BYTES_TO_ALIGN(tail) > 0) 451 tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail)); 452 else 453 tegra_uart_start_tx_dma(tup, count); 454 } 455 456 /* Called by serial core driver with u->lock taken. */ 457 static void tegra_uart_start_tx(struct uart_port *u) 458 { 459 struct tegra_uart_port *tup = to_tegra_uport(u); 460 struct circ_buf *xmit = &u->state->xmit; 461 462 if (!uart_circ_empty(xmit) && !tup->tx_in_progress) 463 tegra_uart_start_next_tx(tup); 464 } 465 466 static unsigned int tegra_uart_tx_empty(struct uart_port *u) 467 { 468 struct tegra_uart_port *tup = to_tegra_uport(u); 469 unsigned int ret = 0; 470 unsigned long flags; 471 472 spin_lock_irqsave(&u->lock, flags); 473 if (!tup->tx_in_progress) { 474 unsigned long lsr = tegra_uart_read(tup, UART_LSR); 475 if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS) 476 ret = TIOCSER_TEMT; 477 } 478 spin_unlock_irqrestore(&u->lock, flags); 479 return ret; 480 } 481 482 static void tegra_uart_stop_tx(struct uart_port *u) 483 { 484 struct tegra_uart_port *tup = to_tegra_uport(u); 485 struct circ_buf *xmit = &tup->uport.state->xmit; 486 struct dma_tx_state state; 487 unsigned int count; 488 489 if (tup->tx_in_progress != TEGRA_UART_TX_DMA) 490 return; 491 492 dmaengine_terminate_all(tup->tx_dma_chan); 493 dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); 494 count = tup->tx_bytes_requested - state.residue; 495 async_tx_ack(tup->tx_dma_desc); 496 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); 497 tup->tx_in_progress = 0; 498 } 499 500 static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup) 501 { 502 struct circ_buf *xmit = &tup->uport.state->xmit; 503 504 tegra_uart_fill_tx_fifo(tup, tup->tx_bytes); 505 tup->tx_in_progress = 0; 506 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 507 uart_write_wakeup(&tup->uport); 508 tegra_uart_start_next_tx(tup); 509 } 510 511 static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, 512 struct tty_port *tty) 513 { 514 do { 515 char flag = TTY_NORMAL; 516 unsigned long lsr = 0; 517 unsigned char ch; 518 519 lsr = tegra_uart_read(tup, UART_LSR); 520 if (!(lsr & UART_LSR_DR)) 521 break; 522 523 flag = tegra_uart_decode_rx_error(tup, lsr); 524 ch = (unsigned char) tegra_uart_read(tup, UART_RX); 525 tup->uport.icount.rx++; 526 527 if (!uart_handle_sysrq_char(&tup->uport, ch) && tty) 528 tty_insert_flip_char(tty, ch, flag); 529 } while (1); 530 } 531 532 static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, 533 struct tty_port *tty, 534 unsigned int count) 535 { 536 int copied; 537 538 /* If count is zero, then there is no data to be copied */ 539 if (!count) 540 return; 541 542 tup->uport.icount.rx += count; 543 if (!tty) { 544 dev_err(tup->uport.dev, "No tty port\n"); 545 return; 546 } 547 dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys, 548 TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); 549 copied = tty_insert_flip_string(tty, 550 ((unsigned char *)(tup->rx_dma_buf_virt)), count); 551 if (copied != count) { 552 WARN_ON(1); 553 dev_err(tup->uport.dev, "RxData copy to tty layer failed\n"); 554 } 555 dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys, 556 TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); 557 } 558 559 static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, 560 unsigned int residue) 561 { 562 struct tty_port *port = &tup->uport.state->port; 563 struct tty_struct *tty = tty_port_tty_get(port); 564 unsigned int count; 565 566 async_tx_ack(tup->rx_dma_desc); 567 count = tup->rx_bytes_requested - residue; 568 569 /* If we are here, DMA is stopped */ 570 tegra_uart_copy_rx_to_tty(tup, port, count); 571 572 tegra_uart_handle_rx_pio(tup, port); 573 if (tty) { 574 tty_flip_buffer_push(port); 575 tty_kref_put(tty); 576 } 577 } 578 579 static void tegra_uart_rx_dma_complete(void *args) 580 { 581 struct tegra_uart_port *tup = args; 582 struct uart_port *u = &tup->uport; 583 unsigned long flags; 584 struct dma_tx_state state; 585 enum dma_status status; 586 587 spin_lock_irqsave(&u->lock, flags); 588 589 status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); 590 591 if (status == DMA_IN_PROGRESS) { 592 dev_dbg(tup->uport.dev, "RX DMA is in progress\n"); 593 goto done; 594 } 595 596 /* Deactivate flow control to stop sender */ 597 if (tup->rts_active) 598 set_rts(tup, false); 599 600 tegra_uart_rx_buffer_push(tup, 0); 601 tegra_uart_start_rx_dma(tup); 602 603 /* Activate flow control to start transfer */ 604 if (tup->rts_active) 605 set_rts(tup, true); 606 607 done: 608 spin_unlock_irqrestore(&u->lock, flags); 609 } 610 611 static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) 612 { 613 struct dma_tx_state state; 614 615 /* Deactivate flow control to stop sender */ 616 if (tup->rts_active) 617 set_rts(tup, false); 618 619 dmaengine_terminate_all(tup->rx_dma_chan); 620 dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); 621 tegra_uart_rx_buffer_push(tup, state.residue); 622 tegra_uart_start_rx_dma(tup); 623 624 if (tup->rts_active) 625 set_rts(tup, true); 626 } 627 628 static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup) 629 { 630 unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE; 631 632 tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan, 633 tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM, 634 DMA_PREP_INTERRUPT); 635 if (!tup->rx_dma_desc) { 636 dev_err(tup->uport.dev, "Not able to get desc for Rx\n"); 637 return -EIO; 638 } 639 640 tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete; 641 tup->rx_dma_desc->callback_param = tup; 642 dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys, 643 count, DMA_TO_DEVICE); 644 tup->rx_bytes_requested = count; 645 tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc); 646 dma_async_issue_pending(tup->rx_dma_chan); 647 return 0; 648 } 649 650 static void tegra_uart_handle_modem_signal_change(struct uart_port *u) 651 { 652 struct tegra_uart_port *tup = to_tegra_uport(u); 653 unsigned long msr; 654 655 msr = tegra_uart_read(tup, UART_MSR); 656 if (!(msr & UART_MSR_ANY_DELTA)) 657 return; 658 659 if (msr & UART_MSR_TERI) 660 tup->uport.icount.rng++; 661 if (msr & UART_MSR_DDSR) 662 tup->uport.icount.dsr++; 663 /* We may only get DDCD when HW init and reset */ 664 if (msr & UART_MSR_DDCD) 665 uart_handle_dcd_change(&tup->uport, msr & UART_MSR_DCD); 666 /* Will start/stop_tx accordingly */ 667 if (msr & UART_MSR_DCTS) 668 uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS); 669 } 670 671 static irqreturn_t tegra_uart_isr(int irq, void *data) 672 { 673 struct tegra_uart_port *tup = data; 674 struct uart_port *u = &tup->uport; 675 unsigned long iir; 676 unsigned long ier; 677 bool is_rx_int = false; 678 unsigned long flags; 679 680 spin_lock_irqsave(&u->lock, flags); 681 while (1) { 682 iir = tegra_uart_read(tup, UART_IIR); 683 if (iir & UART_IIR_NO_INT) { 684 if (is_rx_int) { 685 tegra_uart_handle_rx_dma(tup); 686 if (tup->rx_in_progress) { 687 ier = tup->ier_shadow; 688 ier |= (UART_IER_RLSI | UART_IER_RTOIE | 689 TEGRA_UART_IER_EORD); 690 tup->ier_shadow = ier; 691 tegra_uart_write(tup, ier, UART_IER); 692 } 693 } 694 spin_unlock_irqrestore(&u->lock, flags); 695 return IRQ_HANDLED; 696 } 697 698 switch ((iir >> 1) & 0x7) { 699 case 0: /* Modem signal change interrupt */ 700 tegra_uart_handle_modem_signal_change(u); 701 break; 702 703 case 1: /* Transmit interrupt only triggered when using PIO */ 704 tup->ier_shadow &= ~UART_IER_THRI; 705 tegra_uart_write(tup, tup->ier_shadow, UART_IER); 706 tegra_uart_handle_tx_pio(tup); 707 break; 708 709 case 4: /* End of data */ 710 case 6: /* Rx timeout */ 711 case 2: /* Receive */ 712 if (!is_rx_int) { 713 is_rx_int = true; 714 /* Disable Rx interrupts */ 715 ier = tup->ier_shadow; 716 ier |= UART_IER_RDI; 717 tegra_uart_write(tup, ier, UART_IER); 718 ier &= ~(UART_IER_RDI | UART_IER_RLSI | 719 UART_IER_RTOIE | TEGRA_UART_IER_EORD); 720 tup->ier_shadow = ier; 721 tegra_uart_write(tup, ier, UART_IER); 722 } 723 break; 724 725 case 3: /* Receive error */ 726 tegra_uart_decode_rx_error(tup, 727 tegra_uart_read(tup, UART_LSR)); 728 break; 729 730 case 5: /* break nothing to handle */ 731 case 7: /* break nothing to handle */ 732 break; 733 } 734 } 735 } 736 737 static void tegra_uart_stop_rx(struct uart_port *u) 738 { 739 struct tegra_uart_port *tup = to_tegra_uport(u); 740 struct dma_tx_state state; 741 unsigned long ier; 742 743 if (tup->rts_active) 744 set_rts(tup, false); 745 746 if (!tup->rx_in_progress) 747 return; 748 749 tegra_uart_wait_sym_time(tup, 1); /* wait one character interval */ 750 751 ier = tup->ier_shadow; 752 ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | 753 TEGRA_UART_IER_EORD); 754 tup->ier_shadow = ier; 755 tegra_uart_write(tup, ier, UART_IER); 756 tup->rx_in_progress = 0; 757 dmaengine_terminate_all(tup->rx_dma_chan); 758 dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); 759 tegra_uart_rx_buffer_push(tup, state.residue); 760 } 761 762 static void tegra_uart_hw_deinit(struct tegra_uart_port *tup) 763 { 764 unsigned long flags; 765 unsigned long char_time = DIV_ROUND_UP(10000000, tup->current_baud); 766 unsigned long fifo_empty_time = tup->uport.fifosize * char_time; 767 unsigned long wait_time; 768 unsigned long lsr; 769 unsigned long msr; 770 unsigned long mcr; 771 772 /* Disable interrupts */ 773 tegra_uart_write(tup, 0, UART_IER); 774 775 lsr = tegra_uart_read(tup, UART_LSR); 776 if ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) { 777 msr = tegra_uart_read(tup, UART_MSR); 778 mcr = tegra_uart_read(tup, UART_MCR); 779 if ((mcr & TEGRA_UART_MCR_CTS_EN) && (msr & UART_MSR_CTS)) 780 dev_err(tup->uport.dev, 781 "Tx Fifo not empty, CTS disabled, waiting\n"); 782 783 /* Wait for Tx fifo to be empty */ 784 while ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) { 785 wait_time = min(fifo_empty_time, 100lu); 786 udelay(wait_time); 787 fifo_empty_time -= wait_time; 788 if (!fifo_empty_time) { 789 msr = tegra_uart_read(tup, UART_MSR); 790 mcr = tegra_uart_read(tup, UART_MCR); 791 if ((mcr & TEGRA_UART_MCR_CTS_EN) && 792 (msr & UART_MSR_CTS)) 793 dev_err(tup->uport.dev, 794 "Slave not ready\n"); 795 break; 796 } 797 lsr = tegra_uart_read(tup, UART_LSR); 798 } 799 } 800 801 spin_lock_irqsave(&tup->uport.lock, flags); 802 /* Reset the Rx and Tx FIFOs */ 803 tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); 804 tup->current_baud = 0; 805 spin_unlock_irqrestore(&tup->uport.lock, flags); 806 807 clk_disable_unprepare(tup->uart_clk); 808 } 809 810 static int tegra_uart_hw_init(struct tegra_uart_port *tup) 811 { 812 int ret; 813 814 tup->fcr_shadow = 0; 815 tup->mcr_shadow = 0; 816 tup->lcr_shadow = 0; 817 tup->ier_shadow = 0; 818 tup->current_baud = 0; 819 820 clk_prepare_enable(tup->uart_clk); 821 822 /* Reset the UART controller to clear all previous status.*/ 823 reset_control_assert(tup->rst); 824 udelay(10); 825 reset_control_deassert(tup->rst); 826 827 tup->rx_in_progress = 0; 828 tup->tx_in_progress = 0; 829 830 /* 831 * Set the trigger level 832 * 833 * For PIO mode: 834 * 835 * For receive, this will interrupt the CPU after that many number of 836 * bytes are received, for the remaining bytes the receive timeout 837 * interrupt is received. Rx high watermark is set to 4. 838 * 839 * For transmit, if the trasnmit interrupt is enabled, this will 840 * interrupt the CPU when the number of entries in the FIFO reaches the 841 * low watermark. Tx low watermark is set to 16 bytes. 842 * 843 * For DMA mode: 844 * 845 * Set the Tx trigger to 16. This should match the DMA burst size that 846 * programmed in the DMA registers. 847 */ 848 tup->fcr_shadow = UART_FCR_ENABLE_FIFO; 849 tup->fcr_shadow |= UART_FCR_R_TRIG_01; 850 tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B; 851 tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); 852 853 /* Dummy read to ensure the write is posted */ 854 tegra_uart_read(tup, UART_SCR); 855 856 /* 857 * For all tegra devices (up to t210), there is a hardware issue that 858 * requires software to wait for 3 UART clock periods after enabling 859 * the TX fifo, otherwise data could be lost. 860 */ 861 tegra_uart_wait_cycle_time(tup, 3); 862 863 /* 864 * Initialize the UART with default configuration 865 * (115200, N, 8, 1) so that the receive DMA buffer may be 866 * enqueued 867 */ 868 tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR; 869 tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD); 870 tup->fcr_shadow |= UART_FCR_DMA_SELECT; 871 tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); 872 873 ret = tegra_uart_start_rx_dma(tup); 874 if (ret < 0) { 875 dev_err(tup->uport.dev, "Not able to start Rx DMA\n"); 876 return ret; 877 } 878 tup->rx_in_progress = 1; 879 880 /* 881 * Enable IE_RXS for the receive status interrupts like line errros. 882 * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd. 883 * 884 * If using DMA mode, enable EORD instead of receive interrupt which 885 * will interrupt after the UART is done with the receive instead of 886 * the interrupt when the FIFO "threshold" is reached. 887 * 888 * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when 889 * the DATA is sitting in the FIFO and couldn't be transferred to the 890 * DMA as the DMA size alignment (4 bytes) is not met. EORD will be 891 * triggered when there is a pause of the incomming data stream for 4 892 * characters long. 893 * 894 * For pauses in the data which is not aligned to 4 bytes, we get 895 * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first 896 * then the EORD. 897 */ 898 tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD; 899 tegra_uart_write(tup, tup->ier_shadow, UART_IER); 900 return 0; 901 } 902 903 static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, 904 bool dma_to_memory) 905 { 906 if (dma_to_memory) { 907 dmaengine_terminate_all(tup->rx_dma_chan); 908 dma_release_channel(tup->rx_dma_chan); 909 dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE, 910 tup->rx_dma_buf_virt, tup->rx_dma_buf_phys); 911 tup->rx_dma_chan = NULL; 912 tup->rx_dma_buf_phys = 0; 913 tup->rx_dma_buf_virt = NULL; 914 } else { 915 dmaengine_terminate_all(tup->tx_dma_chan); 916 dma_release_channel(tup->tx_dma_chan); 917 dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys, 918 UART_XMIT_SIZE, DMA_TO_DEVICE); 919 tup->tx_dma_chan = NULL; 920 tup->tx_dma_buf_phys = 0; 921 tup->tx_dma_buf_virt = NULL; 922 } 923 } 924 925 static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, 926 bool dma_to_memory) 927 { 928 struct dma_chan *dma_chan; 929 unsigned char *dma_buf; 930 dma_addr_t dma_phys; 931 int ret; 932 struct dma_slave_config dma_sconfig; 933 934 dma_chan = dma_request_slave_channel_reason(tup->uport.dev, 935 dma_to_memory ? "rx" : "tx"); 936 if (IS_ERR(dma_chan)) { 937 ret = PTR_ERR(dma_chan); 938 dev_err(tup->uport.dev, 939 "DMA channel alloc failed: %d\n", ret); 940 return ret; 941 } 942 943 if (dma_to_memory) { 944 dma_buf = dma_alloc_coherent(tup->uport.dev, 945 TEGRA_UART_RX_DMA_BUFFER_SIZE, 946 &dma_phys, GFP_KERNEL); 947 if (!dma_buf) { 948 dev_err(tup->uport.dev, 949 "Not able to allocate the dma buffer\n"); 950 dma_release_channel(dma_chan); 951 return -ENOMEM; 952 } 953 dma_sconfig.src_addr = tup->uport.mapbase; 954 dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 955 dma_sconfig.src_maxburst = 4; 956 tup->rx_dma_chan = dma_chan; 957 tup->rx_dma_buf_virt = dma_buf; 958 tup->rx_dma_buf_phys = dma_phys; 959 } else { 960 dma_phys = dma_map_single(tup->uport.dev, 961 tup->uport.state->xmit.buf, UART_XMIT_SIZE, 962 DMA_TO_DEVICE); 963 if (dma_mapping_error(tup->uport.dev, dma_phys)) { 964 dev_err(tup->uport.dev, "dma_map_single tx failed\n"); 965 dma_release_channel(dma_chan); 966 return -ENOMEM; 967 } 968 dma_buf = tup->uport.state->xmit.buf; 969 dma_sconfig.dst_addr = tup->uport.mapbase; 970 dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 971 dma_sconfig.dst_maxburst = 16; 972 tup->tx_dma_chan = dma_chan; 973 tup->tx_dma_buf_virt = dma_buf; 974 tup->tx_dma_buf_phys = dma_phys; 975 } 976 977 ret = dmaengine_slave_config(dma_chan, &dma_sconfig); 978 if (ret < 0) { 979 dev_err(tup->uport.dev, 980 "Dma slave config failed, err = %d\n", ret); 981 tegra_uart_dma_channel_free(tup, dma_to_memory); 982 return ret; 983 } 984 985 return 0; 986 } 987 988 static int tegra_uart_startup(struct uart_port *u) 989 { 990 struct tegra_uart_port *tup = to_tegra_uport(u); 991 int ret; 992 993 ret = tegra_uart_dma_channel_allocate(tup, false); 994 if (ret < 0) { 995 dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret); 996 return ret; 997 } 998 999 ret = tegra_uart_dma_channel_allocate(tup, true); 1000 if (ret < 0) { 1001 dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret); 1002 goto fail_rx_dma; 1003 } 1004 1005 ret = tegra_uart_hw_init(tup); 1006 if (ret < 0) { 1007 dev_err(u->dev, "Uart HW init failed, err = %d\n", ret); 1008 goto fail_hw_init; 1009 } 1010 1011 ret = request_irq(u->irq, tegra_uart_isr, 0, 1012 dev_name(u->dev), tup); 1013 if (ret < 0) { 1014 dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq); 1015 goto fail_hw_init; 1016 } 1017 return 0; 1018 1019 fail_hw_init: 1020 tegra_uart_dma_channel_free(tup, true); 1021 fail_rx_dma: 1022 tegra_uart_dma_channel_free(tup, false); 1023 return ret; 1024 } 1025 1026 /* 1027 * Flush any TX data submitted for DMA and PIO. Called when the 1028 * TX circular buffer is reset. 1029 */ 1030 static void tegra_uart_flush_buffer(struct uart_port *u) 1031 { 1032 struct tegra_uart_port *tup = to_tegra_uport(u); 1033 1034 tup->tx_bytes = 0; 1035 if (tup->tx_dma_chan) 1036 dmaengine_terminate_all(tup->tx_dma_chan); 1037 } 1038 1039 static void tegra_uart_shutdown(struct uart_port *u) 1040 { 1041 struct tegra_uart_port *tup = to_tegra_uport(u); 1042 1043 tegra_uart_hw_deinit(tup); 1044 1045 tup->rx_in_progress = 0; 1046 tup->tx_in_progress = 0; 1047 1048 tegra_uart_dma_channel_free(tup, true); 1049 tegra_uart_dma_channel_free(tup, false); 1050 free_irq(u->irq, tup); 1051 } 1052 1053 static void tegra_uart_enable_ms(struct uart_port *u) 1054 { 1055 struct tegra_uart_port *tup = to_tegra_uport(u); 1056 1057 if (tup->enable_modem_interrupt) { 1058 tup->ier_shadow |= UART_IER_MSI; 1059 tegra_uart_write(tup, tup->ier_shadow, UART_IER); 1060 } 1061 } 1062 1063 static void tegra_uart_set_termios(struct uart_port *u, 1064 struct ktermios *termios, struct ktermios *oldtermios) 1065 { 1066 struct tegra_uart_port *tup = to_tegra_uport(u); 1067 unsigned int baud; 1068 unsigned long flags; 1069 unsigned int lcr; 1070 int symb_bit = 1; 1071 struct clk *parent_clk = clk_get_parent(tup->uart_clk); 1072 unsigned long parent_clk_rate = clk_get_rate(parent_clk); 1073 int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF; 1074 1075 max_divider *= 16; 1076 spin_lock_irqsave(&u->lock, flags); 1077 1078 /* Changing configuration, it is safe to stop any rx now */ 1079 if (tup->rts_active) 1080 set_rts(tup, false); 1081 1082 /* Clear all interrupts as configuration is going to be changed */ 1083 tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER); 1084 tegra_uart_read(tup, UART_IER); 1085 tegra_uart_write(tup, 0, UART_IER); 1086 tegra_uart_read(tup, UART_IER); 1087 1088 /* Parity */ 1089 lcr = tup->lcr_shadow; 1090 lcr &= ~UART_LCR_PARITY; 1091 1092 /* CMSPAR isn't supported by this driver */ 1093 termios->c_cflag &= ~CMSPAR; 1094 1095 if ((termios->c_cflag & PARENB) == PARENB) { 1096 symb_bit++; 1097 if (termios->c_cflag & PARODD) { 1098 lcr |= UART_LCR_PARITY; 1099 lcr &= ~UART_LCR_EPAR; 1100 lcr &= ~UART_LCR_SPAR; 1101 } else { 1102 lcr |= UART_LCR_PARITY; 1103 lcr |= UART_LCR_EPAR; 1104 lcr &= ~UART_LCR_SPAR; 1105 } 1106 } 1107 1108 lcr &= ~UART_LCR_WLEN8; 1109 switch (termios->c_cflag & CSIZE) { 1110 case CS5: 1111 lcr |= UART_LCR_WLEN5; 1112 symb_bit += 5; 1113 break; 1114 case CS6: 1115 lcr |= UART_LCR_WLEN6; 1116 symb_bit += 6; 1117 break; 1118 case CS7: 1119 lcr |= UART_LCR_WLEN7; 1120 symb_bit += 7; 1121 break; 1122 default: 1123 lcr |= UART_LCR_WLEN8; 1124 symb_bit += 8; 1125 break; 1126 } 1127 1128 /* Stop bits */ 1129 if (termios->c_cflag & CSTOPB) { 1130 lcr |= UART_LCR_STOP; 1131 symb_bit += 2; 1132 } else { 1133 lcr &= ~UART_LCR_STOP; 1134 symb_bit++; 1135 } 1136 1137 tegra_uart_write(tup, lcr, UART_LCR); 1138 tup->lcr_shadow = lcr; 1139 tup->symb_bit = symb_bit; 1140 1141 /* Baud rate. */ 1142 baud = uart_get_baud_rate(u, termios, oldtermios, 1143 parent_clk_rate/max_divider, 1144 parent_clk_rate/16); 1145 spin_unlock_irqrestore(&u->lock, flags); 1146 tegra_set_baudrate(tup, baud); 1147 if (tty_termios_baud_rate(termios)) 1148 tty_termios_encode_baud_rate(termios, baud, baud); 1149 spin_lock_irqsave(&u->lock, flags); 1150 1151 /* Flow control */ 1152 if (termios->c_cflag & CRTSCTS) { 1153 tup->mcr_shadow |= TEGRA_UART_MCR_CTS_EN; 1154 tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN; 1155 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); 1156 /* if top layer has asked to set rts active then do so here */ 1157 if (tup->rts_active) 1158 set_rts(tup, true); 1159 } else { 1160 tup->mcr_shadow &= ~TEGRA_UART_MCR_CTS_EN; 1161 tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN; 1162 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); 1163 } 1164 1165 /* update the port timeout based on new settings */ 1166 uart_update_timeout(u, termios->c_cflag, baud); 1167 1168 /* Make sure all writes have completed */ 1169 tegra_uart_read(tup, UART_IER); 1170 1171 /* Re-enable interrupt */ 1172 tegra_uart_write(tup, tup->ier_shadow, UART_IER); 1173 tegra_uart_read(tup, UART_IER); 1174 1175 spin_unlock_irqrestore(&u->lock, flags); 1176 } 1177 1178 static const char *tegra_uart_type(struct uart_port *u) 1179 { 1180 return TEGRA_UART_TYPE; 1181 } 1182 1183 static const struct uart_ops tegra_uart_ops = { 1184 .tx_empty = tegra_uart_tx_empty, 1185 .set_mctrl = tegra_uart_set_mctrl, 1186 .get_mctrl = tegra_uart_get_mctrl, 1187 .stop_tx = tegra_uart_stop_tx, 1188 .start_tx = tegra_uart_start_tx, 1189 .stop_rx = tegra_uart_stop_rx, 1190 .flush_buffer = tegra_uart_flush_buffer, 1191 .enable_ms = tegra_uart_enable_ms, 1192 .break_ctl = tegra_uart_break_ctl, 1193 .startup = tegra_uart_startup, 1194 .shutdown = tegra_uart_shutdown, 1195 .set_termios = tegra_uart_set_termios, 1196 .type = tegra_uart_type, 1197 .request_port = tegra_uart_request_port, 1198 .release_port = tegra_uart_release_port, 1199 }; 1200 1201 static struct uart_driver tegra_uart_driver = { 1202 .owner = THIS_MODULE, 1203 .driver_name = "tegra_hsuart", 1204 .dev_name = "ttyTHS", 1205 .cons = NULL, 1206 .nr = TEGRA_UART_MAXIMUM, 1207 }; 1208 1209 static int tegra_uart_parse_dt(struct platform_device *pdev, 1210 struct tegra_uart_port *tup) 1211 { 1212 struct device_node *np = pdev->dev.of_node; 1213 int port; 1214 1215 port = of_alias_get_id(np, "serial"); 1216 if (port < 0) { 1217 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port); 1218 return port; 1219 } 1220 tup->uport.line = port; 1221 1222 tup->enable_modem_interrupt = of_property_read_bool(np, 1223 "nvidia,enable-modem-interrupt"); 1224 return 0; 1225 } 1226 1227 static struct tegra_uart_chip_data tegra20_uart_chip_data = { 1228 .tx_fifo_full_status = false, 1229 .allow_txfifo_reset_fifo_mode = true, 1230 .support_clk_src_div = false, 1231 }; 1232 1233 static struct tegra_uart_chip_data tegra30_uart_chip_data = { 1234 .tx_fifo_full_status = true, 1235 .allow_txfifo_reset_fifo_mode = false, 1236 .support_clk_src_div = true, 1237 }; 1238 1239 static const struct of_device_id tegra_uart_of_match[] = { 1240 { 1241 .compatible = "nvidia,tegra30-hsuart", 1242 .data = &tegra30_uart_chip_data, 1243 }, { 1244 .compatible = "nvidia,tegra20-hsuart", 1245 .data = &tegra20_uart_chip_data, 1246 }, { 1247 }, 1248 }; 1249 MODULE_DEVICE_TABLE(of, tegra_uart_of_match); 1250 1251 static int tegra_uart_probe(struct platform_device *pdev) 1252 { 1253 struct tegra_uart_port *tup; 1254 struct uart_port *u; 1255 struct resource *resource; 1256 int ret; 1257 const struct tegra_uart_chip_data *cdata; 1258 const struct of_device_id *match; 1259 1260 match = of_match_device(tegra_uart_of_match, &pdev->dev); 1261 if (!match) { 1262 dev_err(&pdev->dev, "Error: No device match found\n"); 1263 return -ENODEV; 1264 } 1265 cdata = match->data; 1266 1267 tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL); 1268 if (!tup) { 1269 dev_err(&pdev->dev, "Failed to allocate memory for tup\n"); 1270 return -ENOMEM; 1271 } 1272 1273 ret = tegra_uart_parse_dt(pdev, tup); 1274 if (ret < 0) 1275 return ret; 1276 1277 u = &tup->uport; 1278 u->dev = &pdev->dev; 1279 u->ops = &tegra_uart_ops; 1280 u->type = PORT_TEGRA; 1281 u->fifosize = 32; 1282 tup->cdata = cdata; 1283 1284 platform_set_drvdata(pdev, tup); 1285 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1286 if (!resource) { 1287 dev_err(&pdev->dev, "No IO memory resource\n"); 1288 return -ENODEV; 1289 } 1290 1291 u->mapbase = resource->start; 1292 u->membase = devm_ioremap_resource(&pdev->dev, resource); 1293 if (IS_ERR(u->membase)) 1294 return PTR_ERR(u->membase); 1295 1296 tup->uart_clk = devm_clk_get(&pdev->dev, NULL); 1297 if (IS_ERR(tup->uart_clk)) { 1298 dev_err(&pdev->dev, "Couldn't get the clock\n"); 1299 return PTR_ERR(tup->uart_clk); 1300 } 1301 1302 tup->rst = devm_reset_control_get_exclusive(&pdev->dev, "serial"); 1303 if (IS_ERR(tup->rst)) { 1304 dev_err(&pdev->dev, "Couldn't get the reset\n"); 1305 return PTR_ERR(tup->rst); 1306 } 1307 1308 u->iotype = UPIO_MEM32; 1309 ret = platform_get_irq(pdev, 0); 1310 if (ret < 0) { 1311 dev_err(&pdev->dev, "Couldn't get IRQ\n"); 1312 return ret; 1313 } 1314 u->irq = ret; 1315 u->regshift = 2; 1316 ret = uart_add_one_port(&tegra_uart_driver, u); 1317 if (ret < 0) { 1318 dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret); 1319 return ret; 1320 } 1321 return ret; 1322 } 1323 1324 static int tegra_uart_remove(struct platform_device *pdev) 1325 { 1326 struct tegra_uart_port *tup = platform_get_drvdata(pdev); 1327 struct uart_port *u = &tup->uport; 1328 1329 uart_remove_one_port(&tegra_uart_driver, u); 1330 return 0; 1331 } 1332 1333 #ifdef CONFIG_PM_SLEEP 1334 static int tegra_uart_suspend(struct device *dev) 1335 { 1336 struct tegra_uart_port *tup = dev_get_drvdata(dev); 1337 struct uart_port *u = &tup->uport; 1338 1339 return uart_suspend_port(&tegra_uart_driver, u); 1340 } 1341 1342 static int tegra_uart_resume(struct device *dev) 1343 { 1344 struct tegra_uart_port *tup = dev_get_drvdata(dev); 1345 struct uart_port *u = &tup->uport; 1346 1347 return uart_resume_port(&tegra_uart_driver, u); 1348 } 1349 #endif 1350 1351 static const struct dev_pm_ops tegra_uart_pm_ops = { 1352 SET_SYSTEM_SLEEP_PM_OPS(tegra_uart_suspend, tegra_uart_resume) 1353 }; 1354 1355 static struct platform_driver tegra_uart_platform_driver = { 1356 .probe = tegra_uart_probe, 1357 .remove = tegra_uart_remove, 1358 .driver = { 1359 .name = "serial-tegra", 1360 .of_match_table = tegra_uart_of_match, 1361 .pm = &tegra_uart_pm_ops, 1362 }, 1363 }; 1364 1365 static int __init tegra_uart_init(void) 1366 { 1367 int ret; 1368 1369 ret = uart_register_driver(&tegra_uart_driver); 1370 if (ret < 0) { 1371 pr_err("Could not register %s driver\n", 1372 tegra_uart_driver.driver_name); 1373 return ret; 1374 } 1375 1376 ret = platform_driver_register(&tegra_uart_platform_driver); 1377 if (ret < 0) { 1378 pr_err("Uart platform driver register failed, e = %d\n", ret); 1379 uart_unregister_driver(&tegra_uart_driver); 1380 return ret; 1381 } 1382 return 0; 1383 } 1384 1385 static void __exit tegra_uart_exit(void) 1386 { 1387 pr_info("Unloading tegra uart driver\n"); 1388 platform_driver_unregister(&tegra_uart_platform_driver); 1389 uart_unregister_driver(&tegra_uart_driver); 1390 } 1391 1392 module_init(tegra_uart_init); 1393 module_exit(tegra_uart_exit); 1394 1395 MODULE_ALIAS("platform:serial-tegra"); 1396 MODULE_DESCRIPTION("High speed UART driver for tegra chipset"); 1397 MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); 1398 MODULE_LICENSE("GPL v2"); 1399