1 /* 2 * Support for the asynchronous serial interface (DUART) included 3 * in the BCM1250 and derived System-On-a-Chip (SOC) devices. 4 * 5 * Copyright (c) 2007 Maciej W. Rozycki 6 * 7 * Derived from drivers/char/sb1250_duart.c for which the following 8 * copyright applies: 9 * 10 * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * as published by the Free Software Foundation; either version 15 * 2 of the License, or (at your option) any later version. 16 * 17 * References: 18 * 19 * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation 20 */ 21 22 #if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 23 #define SUPPORT_SYSRQ 24 #endif 25 26 #include <linux/compiler.h> 27 #include <linux/console.h> 28 #include <linux/delay.h> 29 #include <linux/errno.h> 30 #include <linux/init.h> 31 #include <linux/interrupt.h> 32 #include <linux/ioport.h> 33 #include <linux/kernel.h> 34 #include <linux/module.h> 35 #include <linux/major.h> 36 #include <linux/serial.h> 37 #include <linux/serial_core.h> 38 #include <linux/spinlock.h> 39 #include <linux/sysrq.h> 40 #include <linux/tty.h> 41 #include <linux/tty_flip.h> 42 #include <linux/types.h> 43 44 #include <linux/refcount.h> 45 #include <asm/io.h> 46 #include <asm/war.h> 47 48 #include <asm/sibyte/sb1250.h> 49 #include <asm/sibyte/sb1250_uart.h> 50 #include <asm/sibyte/swarm.h> 51 52 53 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 54 #include <asm/sibyte/bcm1480_regs.h> 55 #include <asm/sibyte/bcm1480_int.h> 56 57 #define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0) 58 #define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) 59 #define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) 60 61 #define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING 62 63 #define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) 64 #define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) 65 #define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) 66 67 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 68 #include <asm/sibyte/sb1250_regs.h> 69 #include <asm/sibyte/sb1250_int.h> 70 71 #define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0) 72 #define SBD_CTRLREGS(line) A_DUART_CTRLREG(0) 73 #define SBD_INT(line) (K_INT_UART_0 + (line)) 74 75 #else 76 #error invalid SB1250 UART configuration 77 78 #endif 79 80 81 MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>"); 82 MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver"); 83 MODULE_LICENSE("GPL"); 84 85 86 #define DUART_MAX_CHIP 2 87 #define DUART_MAX_SIDE 2 88 89 /* 90 * Per-port state. 91 */ 92 struct sbd_port { 93 struct sbd_duart *duart; 94 struct uart_port port; 95 unsigned char __iomem *memctrl; 96 int tx_stopped; 97 int initialised; 98 }; 99 100 /* 101 * Per-DUART state for the shared register space. 102 */ 103 struct sbd_duart { 104 struct sbd_port sport[2]; 105 unsigned long mapctrl; 106 refcount_t map_guard; 107 }; 108 109 #define to_sport(uport) container_of(uport, struct sbd_port, port) 110 111 static struct sbd_duart sbd_duarts[DUART_MAX_CHIP]; 112 113 114 /* 115 * Reading and writing SB1250 DUART registers. 116 * 117 * There are three register spaces: two per-channel ones and 118 * a shared one. We have to define accessors appropriately. 119 * All registers are 64-bit and all but the Baud Rate Clock 120 * registers only define 8 least significant bits. There is 121 * also a workaround to take into account. Raw accessors use 122 * the full register width, but cooked ones truncate it 123 * intentionally so that the rest of the driver does not care. 124 */ 125 static u64 __read_sbdchn(struct sbd_port *sport, int reg) 126 { 127 void __iomem *csr = sport->port.membase + reg; 128 129 return __raw_readq(csr); 130 } 131 132 static u64 __read_sbdshr(struct sbd_port *sport, int reg) 133 { 134 void __iomem *csr = sport->memctrl + reg; 135 136 return __raw_readq(csr); 137 } 138 139 static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value) 140 { 141 void __iomem *csr = sport->port.membase + reg; 142 143 __raw_writeq(value, csr); 144 } 145 146 static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value) 147 { 148 void __iomem *csr = sport->memctrl + reg; 149 150 __raw_writeq(value, csr); 151 } 152 153 /* 154 * In bug 1956, we get glitches that can mess up uart registers. This 155 * "read-mode-reg after any register access" is an accepted workaround. 156 */ 157 static void __war_sbd1956(struct sbd_port *sport) 158 { 159 __read_sbdchn(sport, R_DUART_MODE_REG_1); 160 __read_sbdchn(sport, R_DUART_MODE_REG_2); 161 } 162 163 static unsigned char read_sbdchn(struct sbd_port *sport, int reg) 164 { 165 unsigned char retval; 166 167 retval = __read_sbdchn(sport, reg); 168 if (SIBYTE_1956_WAR) 169 __war_sbd1956(sport); 170 return retval; 171 } 172 173 static unsigned char read_sbdshr(struct sbd_port *sport, int reg) 174 { 175 unsigned char retval; 176 177 retval = __read_sbdshr(sport, reg); 178 if (SIBYTE_1956_WAR) 179 __war_sbd1956(sport); 180 return retval; 181 } 182 183 static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value) 184 { 185 __write_sbdchn(sport, reg, value); 186 if (SIBYTE_1956_WAR) 187 __war_sbd1956(sport); 188 } 189 190 static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value) 191 { 192 __write_sbdshr(sport, reg, value); 193 if (SIBYTE_1956_WAR) 194 __war_sbd1956(sport); 195 } 196 197 198 static int sbd_receive_ready(struct sbd_port *sport) 199 { 200 return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY; 201 } 202 203 static int sbd_receive_drain(struct sbd_port *sport) 204 { 205 int loops = 10000; 206 207 while (sbd_receive_ready(sport) && --loops) 208 read_sbdchn(sport, R_DUART_RX_HOLD); 209 return loops; 210 } 211 212 static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport) 213 { 214 return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY; 215 } 216 217 static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport) 218 { 219 int loops = 10000; 220 221 while (!sbd_transmit_ready(sport) && --loops) 222 udelay(2); 223 return loops; 224 } 225 226 static int sbd_transmit_empty(struct sbd_port *sport) 227 { 228 return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT; 229 } 230 231 static int sbd_line_drain(struct sbd_port *sport) 232 { 233 int loops = 10000; 234 235 while (!sbd_transmit_empty(sport) && --loops) 236 udelay(2); 237 return loops; 238 } 239 240 241 static unsigned int sbd_tx_empty(struct uart_port *uport) 242 { 243 struct sbd_port *sport = to_sport(uport); 244 245 return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0; 246 } 247 248 static unsigned int sbd_get_mctrl(struct uart_port *uport) 249 { 250 struct sbd_port *sport = to_sport(uport); 251 unsigned int mctrl, status; 252 253 status = read_sbdshr(sport, R_DUART_IN_PORT); 254 status >>= (uport->line) % 2; 255 mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) | 256 (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) | 257 (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) | 258 (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0); 259 return mctrl; 260 } 261 262 static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl) 263 { 264 struct sbd_port *sport = to_sport(uport); 265 unsigned int clr = 0, set = 0, mode2; 266 267 if (mctrl & TIOCM_DTR) 268 set |= M_DUART_SET_OPR2; 269 else 270 clr |= M_DUART_CLR_OPR2; 271 if (mctrl & TIOCM_RTS) 272 set |= M_DUART_SET_OPR0; 273 else 274 clr |= M_DUART_CLR_OPR0; 275 clr <<= (uport->line) % 2; 276 set <<= (uport->line) % 2; 277 278 mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2); 279 mode2 &= ~M_DUART_CHAN_MODE; 280 if (mctrl & TIOCM_LOOP) 281 mode2 |= V_DUART_CHAN_MODE_LCL_LOOP; 282 else 283 mode2 |= V_DUART_CHAN_MODE_NORMAL; 284 285 write_sbdshr(sport, R_DUART_CLEAR_OPR, clr); 286 write_sbdshr(sport, R_DUART_SET_OPR, set); 287 write_sbdchn(sport, R_DUART_MODE_REG_2, mode2); 288 } 289 290 static void sbd_stop_tx(struct uart_port *uport) 291 { 292 struct sbd_port *sport = to_sport(uport); 293 294 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); 295 sport->tx_stopped = 1; 296 }; 297 298 static void sbd_start_tx(struct uart_port *uport) 299 { 300 struct sbd_port *sport = to_sport(uport); 301 unsigned int mask; 302 303 /* Enable tx interrupts. */ 304 mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); 305 mask |= M_DUART_IMR_TX; 306 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); 307 308 /* Go!, go!, go!... */ 309 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); 310 sport->tx_stopped = 0; 311 }; 312 313 static void sbd_stop_rx(struct uart_port *uport) 314 { 315 struct sbd_port *sport = to_sport(uport); 316 317 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); 318 }; 319 320 static void sbd_enable_ms(struct uart_port *uport) 321 { 322 struct sbd_port *sport = to_sport(uport); 323 324 write_sbdchn(sport, R_DUART_AUXCTL_X, 325 M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA); 326 } 327 328 static void sbd_break_ctl(struct uart_port *uport, int break_state) 329 { 330 struct sbd_port *sport = to_sport(uport); 331 332 if (break_state == -1) 333 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK); 334 else 335 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK); 336 } 337 338 339 static void sbd_receive_chars(struct sbd_port *sport) 340 { 341 struct uart_port *uport = &sport->port; 342 struct uart_icount *icount; 343 unsigned int status, ch, flag; 344 int count; 345 346 for (count = 16; count; count--) { 347 status = read_sbdchn(sport, R_DUART_STATUS); 348 if (!(status & M_DUART_RX_RDY)) 349 break; 350 351 ch = read_sbdchn(sport, R_DUART_RX_HOLD); 352 353 flag = TTY_NORMAL; 354 355 icount = &uport->icount; 356 icount->rx++; 357 358 if (unlikely(status & 359 (M_DUART_RCVD_BRK | M_DUART_FRM_ERR | 360 M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) { 361 if (status & M_DUART_RCVD_BRK) { 362 icount->brk++; 363 if (uart_handle_break(uport)) 364 continue; 365 } else if (status & M_DUART_FRM_ERR) 366 icount->frame++; 367 else if (status & M_DUART_PARITY_ERR) 368 icount->parity++; 369 if (status & M_DUART_OVRUN_ERR) 370 icount->overrun++; 371 372 status &= uport->read_status_mask; 373 if (status & M_DUART_RCVD_BRK) 374 flag = TTY_BREAK; 375 else if (status & M_DUART_FRM_ERR) 376 flag = TTY_FRAME; 377 else if (status & M_DUART_PARITY_ERR) 378 flag = TTY_PARITY; 379 } 380 381 if (uart_handle_sysrq_char(uport, ch)) 382 continue; 383 384 uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag); 385 } 386 387 tty_flip_buffer_push(&uport->state->port); 388 } 389 390 static void sbd_transmit_chars(struct sbd_port *sport) 391 { 392 struct uart_port *uport = &sport->port; 393 struct circ_buf *xmit = &sport->port.state->xmit; 394 unsigned int mask; 395 int stop_tx; 396 397 /* XON/XOFF chars. */ 398 if (sport->port.x_char) { 399 write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char); 400 sport->port.icount.tx++; 401 sport->port.x_char = 0; 402 return; 403 } 404 405 /* If nothing to do or stopped or hardware stopped. */ 406 stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)); 407 408 /* Send char. */ 409 if (!stop_tx) { 410 write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]); 411 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 412 sport->port.icount.tx++; 413 414 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 415 uart_write_wakeup(&sport->port); 416 } 417 418 /* Are we are done? */ 419 if (stop_tx || uart_circ_empty(xmit)) { 420 /* Disable tx interrupts. */ 421 mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); 422 mask &= ~M_DUART_IMR_TX; 423 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); 424 } 425 } 426 427 static void sbd_status_handle(struct sbd_port *sport) 428 { 429 struct uart_port *uport = &sport->port; 430 unsigned int delta; 431 432 delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); 433 delta >>= (uport->line) % 2; 434 435 if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG)) 436 uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL)); 437 438 if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG)) 439 uport->icount.dsr++; 440 441 if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) << 442 S_DUART_IN_PIN_CHNG)) 443 wake_up_interruptible(&uport->state->port.delta_msr_wait); 444 } 445 446 static irqreturn_t sbd_interrupt(int irq, void *dev_id) 447 { 448 struct sbd_port *sport = dev_id; 449 struct uart_port *uport = &sport->port; 450 irqreturn_t status = IRQ_NONE; 451 unsigned int intstat; 452 int count; 453 454 for (count = 16; count; count--) { 455 intstat = read_sbdshr(sport, 456 R_DUART_ISRREG((uport->line) % 2)); 457 intstat &= read_sbdshr(sport, 458 R_DUART_IMRREG((uport->line) % 2)); 459 intstat &= M_DUART_ISR_ALL; 460 if (!intstat) 461 break; 462 463 if (intstat & M_DUART_ISR_RX) 464 sbd_receive_chars(sport); 465 if (intstat & M_DUART_ISR_IN) 466 sbd_status_handle(sport); 467 if (intstat & M_DUART_ISR_TX) 468 sbd_transmit_chars(sport); 469 470 status = IRQ_HANDLED; 471 } 472 473 return status; 474 } 475 476 477 static int sbd_startup(struct uart_port *uport) 478 { 479 struct sbd_port *sport = to_sport(uport); 480 unsigned int mode1; 481 int ret; 482 483 ret = request_irq(sport->port.irq, sbd_interrupt, 484 IRQF_SHARED, "sb1250-duart", sport); 485 if (ret) 486 return ret; 487 488 /* Clear the receive FIFO. */ 489 sbd_receive_drain(sport); 490 491 /* Clear the interrupt registers. */ 492 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT); 493 read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); 494 495 /* Set rx/tx interrupt to FIFO available. */ 496 mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1); 497 mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT); 498 write_sbdchn(sport, R_DUART_MODE_REG_1, mode1); 499 500 /* Disable tx, enable rx. */ 501 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN); 502 sport->tx_stopped = 1; 503 504 /* Enable interrupts. */ 505 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 506 M_DUART_IMR_IN | M_DUART_IMR_RX); 507 508 return 0; 509 } 510 511 static void sbd_shutdown(struct uart_port *uport) 512 { 513 struct sbd_port *sport = to_sport(uport); 514 515 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); 516 sport->tx_stopped = 1; 517 free_irq(sport->port.irq, sport); 518 } 519 520 521 static void sbd_init_port(struct sbd_port *sport) 522 { 523 struct uart_port *uport = &sport->port; 524 525 if (sport->initialised) 526 return; 527 528 /* There is no DUART reset feature, so just set some sane defaults. */ 529 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX); 530 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX); 531 write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8); 532 write_sbdchn(sport, R_DUART_MODE_REG_2, 0); 533 write_sbdchn(sport, R_DUART_FULL_CTL, 534 V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15)); 535 write_sbdchn(sport, R_DUART_OPCR_X, 0); 536 write_sbdchn(sport, R_DUART_AUXCTL_X, 0); 537 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); 538 539 sport->initialised = 1; 540 } 541 542 static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, 543 struct ktermios *old_termios) 544 { 545 struct sbd_port *sport = to_sport(uport); 546 unsigned int mode1 = 0, mode2 = 0, aux = 0; 547 unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0; 548 unsigned int oldmode1, oldmode2, oldaux; 549 unsigned int baud, brg; 550 unsigned int command; 551 552 mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD | 553 M_DUART_BITS_PER_CHAR); 554 mode2mask |= ~M_DUART_STOP_BIT_LEN_2; 555 auxmask |= ~M_DUART_CTS_CHNG_ENA; 556 557 /* Byte size. */ 558 switch (termios->c_cflag & CSIZE) { 559 case CS5: 560 case CS6: 561 /* Unsupported, leave unchanged. */ 562 mode1mask |= M_DUART_PARITY_MODE; 563 break; 564 case CS7: 565 mode1 |= V_DUART_BITS_PER_CHAR_7; 566 break; 567 case CS8: 568 default: 569 mode1 |= V_DUART_BITS_PER_CHAR_8; 570 break; 571 } 572 573 /* Parity and stop bits. */ 574 if (termios->c_cflag & CSTOPB) 575 mode2 |= M_DUART_STOP_BIT_LEN_2; 576 else 577 mode2 |= M_DUART_STOP_BIT_LEN_1; 578 if (termios->c_cflag & PARENB) 579 mode1 |= V_DUART_PARITY_MODE_ADD; 580 else 581 mode1 |= V_DUART_PARITY_MODE_NONE; 582 if (termios->c_cflag & PARODD) 583 mode1 |= M_DUART_PARITY_TYPE_ODD; 584 else 585 mode1 |= M_DUART_PARITY_TYPE_EVEN; 586 587 baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); 588 brg = V_DUART_BAUD_RATE(baud); 589 /* The actual lower bound is 1221bps, so compensate. */ 590 if (brg > M_DUART_CLK_COUNTER) 591 brg = M_DUART_CLK_COUNTER; 592 593 uart_update_timeout(uport, termios->c_cflag, baud); 594 595 uport->read_status_mask = M_DUART_OVRUN_ERR; 596 if (termios->c_iflag & INPCK) 597 uport->read_status_mask |= M_DUART_FRM_ERR | 598 M_DUART_PARITY_ERR; 599 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 600 uport->read_status_mask |= M_DUART_RCVD_BRK; 601 602 uport->ignore_status_mask = 0; 603 if (termios->c_iflag & IGNPAR) 604 uport->ignore_status_mask |= M_DUART_FRM_ERR | 605 M_DUART_PARITY_ERR; 606 if (termios->c_iflag & IGNBRK) { 607 uport->ignore_status_mask |= M_DUART_RCVD_BRK; 608 if (termios->c_iflag & IGNPAR) 609 uport->ignore_status_mask |= M_DUART_OVRUN_ERR; 610 } 611 612 if (termios->c_cflag & CREAD) 613 command = M_DUART_RX_EN; 614 else 615 command = M_DUART_RX_DIS; 616 617 if (termios->c_cflag & CRTSCTS) 618 aux |= M_DUART_CTS_CHNG_ENA; 619 else 620 aux &= ~M_DUART_CTS_CHNG_ENA; 621 622 spin_lock(&uport->lock); 623 624 if (sport->tx_stopped) 625 command |= M_DUART_TX_DIS; 626 else 627 command |= M_DUART_TX_EN; 628 629 oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask; 630 oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask; 631 oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask; 632 633 if (!sport->tx_stopped) 634 sbd_line_drain(sport); 635 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); 636 637 write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1); 638 write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2); 639 write_sbdchn(sport, R_DUART_CLK_SEL, brg); 640 write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux); 641 642 write_sbdchn(sport, R_DUART_CMD, command); 643 644 spin_unlock(&uport->lock); 645 } 646 647 648 static const char *sbd_type(struct uart_port *uport) 649 { 650 return "SB1250 DUART"; 651 } 652 653 static void sbd_release_port(struct uart_port *uport) 654 { 655 struct sbd_port *sport = to_sport(uport); 656 struct sbd_duart *duart = sport->duart; 657 658 iounmap(sport->memctrl); 659 sport->memctrl = NULL; 660 iounmap(uport->membase); 661 uport->membase = NULL; 662 663 if(refcount_dec_and_test(&duart->map_guard)) 664 release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); 665 release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); 666 } 667 668 static int sbd_map_port(struct uart_port *uport) 669 { 670 const char *err = KERN_ERR "sbd: Cannot map MMIO\n"; 671 struct sbd_port *sport = to_sport(uport); 672 struct sbd_duart *duart = sport->duart; 673 674 if (!uport->membase) 675 uport->membase = ioremap_nocache(uport->mapbase, 676 DUART_CHANREG_SPACING); 677 if (!uport->membase) { 678 printk(err); 679 return -ENOMEM; 680 } 681 682 if (!sport->memctrl) 683 sport->memctrl = ioremap_nocache(duart->mapctrl, 684 DUART_CHANREG_SPACING); 685 if (!sport->memctrl) { 686 printk(err); 687 iounmap(uport->membase); 688 uport->membase = NULL; 689 return -ENOMEM; 690 } 691 692 return 0; 693 } 694 695 static int sbd_request_port(struct uart_port *uport) 696 { 697 const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; 698 struct sbd_duart *duart = to_sport(uport)->duart; 699 int ret = 0; 700 701 if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, 702 "sb1250-duart")) { 703 printk(err); 704 return -EBUSY; 705 } 706 refcount_inc(&duart->map_guard); 707 if (refcount_read(&duart->map_guard) == 1) { 708 if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, 709 "sb1250-duart")) { 710 refcount_dec(&duart->map_guard); 711 printk(err); 712 ret = -EBUSY; 713 } 714 } 715 if (!ret) { 716 ret = sbd_map_port(uport); 717 if (ret) { 718 if (refcount_dec_and_test(&duart->map_guard)) 719 release_mem_region(duart->mapctrl, 720 DUART_CHANREG_SPACING); 721 } 722 } 723 if (ret) { 724 release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); 725 return ret; 726 } 727 return 0; 728 } 729 730 static void sbd_config_port(struct uart_port *uport, int flags) 731 { 732 struct sbd_port *sport = to_sport(uport); 733 734 if (flags & UART_CONFIG_TYPE) { 735 if (sbd_request_port(uport)) 736 return; 737 738 uport->type = PORT_SB1250_DUART; 739 740 sbd_init_port(sport); 741 } 742 } 743 744 static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser) 745 { 746 int ret = 0; 747 748 if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART) 749 ret = -EINVAL; 750 if (ser->irq != uport->irq) 751 ret = -EINVAL; 752 if (ser->baud_base != uport->uartclk / 16) 753 ret = -EINVAL; 754 return ret; 755 } 756 757 758 static const struct uart_ops sbd_ops = { 759 .tx_empty = sbd_tx_empty, 760 .set_mctrl = sbd_set_mctrl, 761 .get_mctrl = sbd_get_mctrl, 762 .stop_tx = sbd_stop_tx, 763 .start_tx = sbd_start_tx, 764 .stop_rx = sbd_stop_rx, 765 .enable_ms = sbd_enable_ms, 766 .break_ctl = sbd_break_ctl, 767 .startup = sbd_startup, 768 .shutdown = sbd_shutdown, 769 .set_termios = sbd_set_termios, 770 .type = sbd_type, 771 .release_port = sbd_release_port, 772 .request_port = sbd_request_port, 773 .config_port = sbd_config_port, 774 .verify_port = sbd_verify_port, 775 }; 776 777 /* Initialize SB1250 DUART port structures. */ 778 static void __init sbd_probe_duarts(void) 779 { 780 static int probed; 781 int chip, side; 782 int max_lines, line; 783 784 if (probed) 785 return; 786 787 /* Set the number of available units based on the SOC type. */ 788 switch (soc_type) { 789 case K_SYS_SOC_TYPE_BCM1x55: 790 case K_SYS_SOC_TYPE_BCM1x80: 791 max_lines = 4; 792 break; 793 default: 794 /* Assume at least two serial ports at the normal address. */ 795 max_lines = 2; 796 break; 797 } 798 799 probed = 1; 800 801 for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines; 802 chip++) { 803 sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line); 804 805 for (side = 0; side < DUART_MAX_SIDE && line < max_lines; 806 side++, line++) { 807 struct sbd_port *sport = &sbd_duarts[chip].sport[side]; 808 struct uart_port *uport = &sport->port; 809 810 sport->duart = &sbd_duarts[chip]; 811 812 uport->irq = SBD_INT(line); 813 uport->uartclk = 100000000 / 20 * 16; 814 uport->fifosize = 16; 815 uport->iotype = UPIO_MEM; 816 uport->flags = UPF_BOOT_AUTOCONF; 817 uport->ops = &sbd_ops; 818 uport->line = line; 819 uport->mapbase = SBD_CHANREGS(line); 820 } 821 } 822 } 823 824 825 #ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE 826 /* 827 * Serial console stuff. Very basic, polling driver for doing serial 828 * console output. The console_lock is held by the caller, so we 829 * shouldn't be interrupted for more console activity. 830 */ 831 static void sbd_console_putchar(struct uart_port *uport, int ch) 832 { 833 struct sbd_port *sport = to_sport(uport); 834 835 sbd_transmit_drain(sport); 836 write_sbdchn(sport, R_DUART_TX_HOLD, ch); 837 } 838 839 static void sbd_console_write(struct console *co, const char *s, 840 unsigned int count) 841 { 842 int chip = co->index / DUART_MAX_SIDE; 843 int side = co->index % DUART_MAX_SIDE; 844 struct sbd_port *sport = &sbd_duarts[chip].sport[side]; 845 struct uart_port *uport = &sport->port; 846 unsigned long flags; 847 unsigned int mask; 848 849 /* Disable transmit interrupts and enable the transmitter. */ 850 spin_lock_irqsave(&uport->lock, flags); 851 mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); 852 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 853 mask & ~M_DUART_IMR_TX); 854 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); 855 spin_unlock_irqrestore(&uport->lock, flags); 856 857 uart_console_write(&sport->port, s, count, sbd_console_putchar); 858 859 /* Restore transmit interrupts and the transmitter enable. */ 860 spin_lock_irqsave(&uport->lock, flags); 861 sbd_line_drain(sport); 862 if (sport->tx_stopped) 863 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); 864 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); 865 spin_unlock_irqrestore(&uport->lock, flags); 866 } 867 868 static int __init sbd_console_setup(struct console *co, char *options) 869 { 870 int chip = co->index / DUART_MAX_SIDE; 871 int side = co->index % DUART_MAX_SIDE; 872 struct sbd_port *sport = &sbd_duarts[chip].sport[side]; 873 struct uart_port *uport = &sport->port; 874 int baud = 115200; 875 int bits = 8; 876 int parity = 'n'; 877 int flow = 'n'; 878 int ret; 879 880 if (!sport->duart) 881 return -ENXIO; 882 883 ret = sbd_map_port(uport); 884 if (ret) 885 return ret; 886 887 sbd_init_port(sport); 888 889 if (options) 890 uart_parse_options(options, &baud, &parity, &bits, &flow); 891 return uart_set_options(uport, co, baud, parity, bits, flow); 892 } 893 894 static struct uart_driver sbd_reg; 895 static struct console sbd_console = { 896 .name = "duart", 897 .write = sbd_console_write, 898 .device = uart_console_device, 899 .setup = sbd_console_setup, 900 .flags = CON_PRINTBUFFER, 901 .index = -1, 902 .data = &sbd_reg 903 }; 904 905 static int __init sbd_serial_console_init(void) 906 { 907 sbd_probe_duarts(); 908 register_console(&sbd_console); 909 910 return 0; 911 } 912 913 console_initcall(sbd_serial_console_init); 914 915 #define SERIAL_SB1250_DUART_CONSOLE &sbd_console 916 #else 917 #define SERIAL_SB1250_DUART_CONSOLE NULL 918 #endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */ 919 920 921 static struct uart_driver sbd_reg = { 922 .owner = THIS_MODULE, 923 .driver_name = "sb1250_duart", 924 .dev_name = "duart", 925 .major = TTY_MAJOR, 926 .minor = SB1250_DUART_MINOR_BASE, 927 .nr = DUART_MAX_CHIP * DUART_MAX_SIDE, 928 .cons = SERIAL_SB1250_DUART_CONSOLE, 929 }; 930 931 /* Set up the driver and register it. */ 932 static int __init sbd_init(void) 933 { 934 int i, ret; 935 936 sbd_probe_duarts(); 937 938 ret = uart_register_driver(&sbd_reg); 939 if (ret) 940 return ret; 941 942 for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) { 943 struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; 944 struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; 945 struct uart_port *uport = &sport->port; 946 947 if (sport->duart) 948 uart_add_one_port(&sbd_reg, uport); 949 } 950 951 return 0; 952 } 953 954 /* Unload the driver. Unregister stuff, get ready to go away. */ 955 static void __exit sbd_exit(void) 956 { 957 int i; 958 959 for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) { 960 struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; 961 struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; 962 struct uart_port *uport = &sport->port; 963 964 if (sport->duart) 965 uart_remove_one_port(&sbd_reg, uport); 966 } 967 968 uart_unregister_driver(&sbd_reg); 969 } 970 971 module_init(sbd_init); 972 module_exit(sbd_exit); 973