1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver core for Samsung SoC onboard UARTs. 4 * 5 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics 6 * http://armlinux.simtec.co.uk/ 7 */ 8 9 /* Note on 2410 error handling 10 * 11 * The s3c2410 manual has a love/hate affair with the contents of the 12 * UERSTAT register in the UART blocks, and keeps marking some of the 13 * error bits as reserved. Having checked with the s3c2410x01, 14 * it copes with BREAKs properly, so I am happy to ignore the RESERVED 15 * feature from the latter versions of the manual. 16 * 17 * If it becomes aparrent that latter versions of the 2410 remove these 18 * bits, then action will have to be taken to differentiate the versions 19 * and change the policy on BREAK 20 * 21 * BJD, 04-Nov-2004 22 */ 23 24 #include <linux/dmaengine.h> 25 #include <linux/dma-mapping.h> 26 #include <linux/slab.h> 27 #include <linux/math.h> 28 #include <linux/module.h> 29 #include <linux/ioport.h> 30 #include <linux/io.h> 31 #include <linux/platform_device.h> 32 #include <linux/init.h> 33 #include <linux/sysrq.h> 34 #include <linux/console.h> 35 #include <linux/tty.h> 36 #include <linux/tty_flip.h> 37 #include <linux/serial_core.h> 38 #include <linux/serial.h> 39 #include <linux/serial_s3c.h> 40 #include <linux/delay.h> 41 #include <linux/clk.h> 42 #include <linux/cpufreq.h> 43 #include <linux/of.h> 44 #include <asm/irq.h> 45 46 /* UART name and device definitions */ 47 48 #define S3C24XX_SERIAL_NAME "ttySAC" 49 #define S3C24XX_SERIAL_MAJOR 204 50 #define S3C24XX_SERIAL_MINOR 64 51 52 #ifdef CONFIG_ARM64 53 #define UART_NR 12 54 #else 55 #define UART_NR CONFIG_SERIAL_SAMSUNG_UARTS 56 #endif 57 58 #define S3C24XX_TX_PIO 1 59 #define S3C24XX_TX_DMA 2 60 #define S3C24XX_RX_PIO 1 61 #define S3C24XX_RX_DMA 2 62 63 /* flag to ignore all characters coming in */ 64 #define RXSTAT_DUMMY_READ (0x10000000) 65 66 enum s3c24xx_port_type { 67 TYPE_S3C24XX, 68 TYPE_S3C6400, 69 TYPE_APPLE_S5L, 70 }; 71 72 struct s3c24xx_uart_info { 73 const char *name; 74 enum s3c24xx_port_type type; 75 unsigned int port_type; 76 unsigned int fifosize; 77 unsigned long rx_fifomask; 78 unsigned long rx_fifoshift; 79 unsigned long rx_fifofull; 80 unsigned long tx_fifomask; 81 unsigned long tx_fifoshift; 82 unsigned long tx_fifofull; 83 unsigned int def_clk_sel; 84 unsigned long num_clks; 85 unsigned long clksel_mask; 86 unsigned long clksel_shift; 87 unsigned long ucon_mask; 88 89 /* uart port features */ 90 91 unsigned int has_divslot:1; 92 }; 93 94 struct s3c24xx_serial_drv_data { 95 const struct s3c24xx_uart_info info; 96 const struct s3c2410_uartcfg def_cfg; 97 const unsigned int fifosize[UART_NR]; 98 }; 99 100 struct s3c24xx_uart_dma { 101 unsigned int rx_chan_id; 102 unsigned int tx_chan_id; 103 104 struct dma_slave_config rx_conf; 105 struct dma_slave_config tx_conf; 106 107 struct dma_chan *rx_chan; 108 struct dma_chan *tx_chan; 109 110 dma_addr_t rx_addr; 111 dma_addr_t tx_addr; 112 113 dma_cookie_t rx_cookie; 114 dma_cookie_t tx_cookie; 115 116 char *rx_buf; 117 118 dma_addr_t tx_transfer_addr; 119 120 size_t rx_size; 121 size_t tx_size; 122 123 struct dma_async_tx_descriptor *tx_desc; 124 struct dma_async_tx_descriptor *rx_desc; 125 126 int tx_bytes_requested; 127 int rx_bytes_requested; 128 }; 129 130 struct s3c24xx_uart_port { 131 unsigned char rx_claimed; 132 unsigned char tx_claimed; 133 unsigned char rx_enabled; 134 unsigned char tx_enabled; 135 unsigned int pm_level; 136 unsigned long baudclk_rate; 137 unsigned int min_dma_size; 138 139 unsigned int rx_irq; 140 unsigned int tx_irq; 141 142 unsigned int tx_in_progress; 143 unsigned int tx_mode; 144 unsigned int rx_mode; 145 146 const struct s3c24xx_uart_info *info; 147 struct clk *clk; 148 struct clk *baudclk; 149 struct uart_port port; 150 const struct s3c24xx_serial_drv_data *drv_data; 151 152 /* reference to platform data */ 153 const struct s3c2410_uartcfg *cfg; 154 155 struct s3c24xx_uart_dma *dma; 156 }; 157 158 static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport); 159 160 /* conversion functions */ 161 162 #define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev) 163 164 /* register access controls */ 165 166 #define portaddr(port, reg) ((port)->membase + (reg)) 167 #define portaddrl(port, reg) \ 168 ((unsigned long *)(unsigned long)((port)->membase + (reg))) 169 170 static u32 rd_reg(const struct uart_port *port, u32 reg) 171 { 172 switch (port->iotype) { 173 case UPIO_MEM: 174 return readb_relaxed(portaddr(port, reg)); 175 case UPIO_MEM32: 176 return readl_relaxed(portaddr(port, reg)); 177 default: 178 return 0; 179 } 180 return 0; 181 } 182 183 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg))) 184 185 static void wr_reg(const struct uart_port *port, u32 reg, u32 val) 186 { 187 switch (port->iotype) { 188 case UPIO_MEM: 189 writeb_relaxed(val, portaddr(port, reg)); 190 break; 191 case UPIO_MEM32: 192 writel_relaxed(val, portaddr(port, reg)); 193 break; 194 } 195 } 196 197 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg)) 198 199 /* Byte-order aware bit setting/clearing functions. */ 200 201 static inline void s3c24xx_set_bit(const struct uart_port *port, int idx, 202 unsigned int reg) 203 { 204 unsigned long flags; 205 u32 val; 206 207 local_irq_save(flags); 208 val = rd_regl(port, reg); 209 val |= (1 << idx); 210 wr_regl(port, reg, val); 211 local_irq_restore(flags); 212 } 213 214 static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx, 215 unsigned int reg) 216 { 217 unsigned long flags; 218 u32 val; 219 220 local_irq_save(flags); 221 val = rd_regl(port, reg); 222 val &= ~(1 << idx); 223 wr_regl(port, reg, val); 224 local_irq_restore(flags); 225 } 226 227 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) 228 { 229 return container_of(port, struct s3c24xx_uart_port, port); 230 } 231 232 /* translate a port to the device name */ 233 234 static inline const char *s3c24xx_serial_portname(const struct uart_port *port) 235 { 236 return to_platform_device(port->dev)->name; 237 } 238 239 static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port) 240 { 241 return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; 242 } 243 244 static void s3c24xx_serial_rx_enable(struct uart_port *port) 245 { 246 struct s3c24xx_uart_port *ourport = to_ourport(port); 247 unsigned long flags; 248 unsigned int ucon, ufcon; 249 int count = 10000; 250 251 spin_lock_irqsave(&port->lock, flags); 252 253 while (--count && !s3c24xx_serial_txempty_nofifo(port)) 254 udelay(100); 255 256 ufcon = rd_regl(port, S3C2410_UFCON); 257 ufcon |= S3C2410_UFCON_RESETRX; 258 wr_regl(port, S3C2410_UFCON, ufcon); 259 260 ucon = rd_regl(port, S3C2410_UCON); 261 ucon |= S3C2410_UCON_RXIRQMODE; 262 wr_regl(port, S3C2410_UCON, ucon); 263 264 ourport->rx_enabled = 1; 265 spin_unlock_irqrestore(&port->lock, flags); 266 } 267 268 static void s3c24xx_serial_rx_disable(struct uart_port *port) 269 { 270 struct s3c24xx_uart_port *ourport = to_ourport(port); 271 unsigned long flags; 272 unsigned int ucon; 273 274 spin_lock_irqsave(&port->lock, flags); 275 276 ucon = rd_regl(port, S3C2410_UCON); 277 ucon &= ~S3C2410_UCON_RXIRQMODE; 278 wr_regl(port, S3C2410_UCON, ucon); 279 280 ourport->rx_enabled = 0; 281 spin_unlock_irqrestore(&port->lock, flags); 282 } 283 284 static void s3c24xx_serial_stop_tx(struct uart_port *port) 285 { 286 struct s3c24xx_uart_port *ourport = to_ourport(port); 287 struct s3c24xx_uart_dma *dma = ourport->dma; 288 struct dma_tx_state state; 289 int count; 290 291 if (!ourport->tx_enabled) 292 return; 293 294 switch (ourport->info->type) { 295 case TYPE_S3C6400: 296 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); 297 break; 298 case TYPE_APPLE_S5L: 299 s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON); 300 break; 301 default: 302 disable_irq_nosync(ourport->tx_irq); 303 break; 304 } 305 306 if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { 307 dmaengine_pause(dma->tx_chan); 308 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); 309 dmaengine_terminate_all(dma->tx_chan); 310 dma_sync_single_for_cpu(dma->tx_chan->device->dev, 311 dma->tx_transfer_addr, dma->tx_size, 312 DMA_TO_DEVICE); 313 async_tx_ack(dma->tx_desc); 314 count = dma->tx_bytes_requested - state.residue; 315 uart_xmit_advance(port, count); 316 } 317 318 ourport->tx_enabled = 0; 319 ourport->tx_in_progress = 0; 320 321 if (port->flags & UPF_CONS_FLOW) 322 s3c24xx_serial_rx_enable(port); 323 324 ourport->tx_mode = 0; 325 } 326 327 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport); 328 329 static void s3c24xx_serial_tx_dma_complete(void *args) 330 { 331 struct s3c24xx_uart_port *ourport = args; 332 struct uart_port *port = &ourport->port; 333 struct circ_buf *xmit = &port->state->xmit; 334 struct s3c24xx_uart_dma *dma = ourport->dma; 335 struct dma_tx_state state; 336 unsigned long flags; 337 int count; 338 339 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); 340 count = dma->tx_bytes_requested - state.residue; 341 async_tx_ack(dma->tx_desc); 342 343 dma_sync_single_for_cpu(dma->tx_chan->device->dev, 344 dma->tx_transfer_addr, dma->tx_size, 345 DMA_TO_DEVICE); 346 347 spin_lock_irqsave(&port->lock, flags); 348 349 uart_xmit_advance(port, count); 350 ourport->tx_in_progress = 0; 351 352 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 353 uart_write_wakeup(port); 354 355 s3c24xx_serial_start_next_tx(ourport); 356 spin_unlock_irqrestore(&port->lock, flags); 357 } 358 359 static void enable_tx_dma(struct s3c24xx_uart_port *ourport) 360 { 361 const struct uart_port *port = &ourport->port; 362 u32 ucon; 363 364 /* Mask Tx interrupt */ 365 switch (ourport->info->type) { 366 case TYPE_S3C6400: 367 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); 368 break; 369 case TYPE_APPLE_S5L: 370 WARN_ON(1); // No DMA 371 break; 372 default: 373 disable_irq_nosync(ourport->tx_irq); 374 break; 375 } 376 377 /* Enable tx dma mode */ 378 ucon = rd_regl(port, S3C2410_UCON); 379 ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK); 380 ucon |= S3C64XX_UCON_TXBURST_1; 381 ucon |= S3C64XX_UCON_TXMODE_DMA; 382 wr_regl(port, S3C2410_UCON, ucon); 383 384 ourport->tx_mode = S3C24XX_TX_DMA; 385 } 386 387 static void enable_tx_pio(struct s3c24xx_uart_port *ourport) 388 { 389 const struct uart_port *port = &ourport->port; 390 u32 ucon, ufcon; 391 392 /* Set ufcon txtrig */ 393 ourport->tx_in_progress = S3C24XX_TX_PIO; 394 ufcon = rd_regl(port, S3C2410_UFCON); 395 wr_regl(port, S3C2410_UFCON, ufcon); 396 397 /* Enable tx pio mode */ 398 ucon = rd_regl(port, S3C2410_UCON); 399 ucon &= ~(S3C64XX_UCON_TXMODE_MASK); 400 ucon |= S3C64XX_UCON_TXMODE_CPU; 401 wr_regl(port, S3C2410_UCON, ucon); 402 403 /* Unmask Tx interrupt */ 404 switch (ourport->info->type) { 405 case TYPE_S3C6400: 406 s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD, 407 S3C64XX_UINTM); 408 break; 409 case TYPE_APPLE_S5L: 410 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK; 411 wr_regl(port, S3C2410_UCON, ucon); 412 break; 413 default: 414 enable_irq(ourport->tx_irq); 415 break; 416 } 417 418 ourport->tx_mode = S3C24XX_TX_PIO; 419 420 /* 421 * The Apple version only has edge triggered TX IRQs, so we need 422 * to kick off the process by sending some characters here. 423 */ 424 if (ourport->info->type == TYPE_APPLE_S5L) 425 s3c24xx_serial_tx_chars(ourport); 426 } 427 428 static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) 429 { 430 if (ourport->tx_mode != S3C24XX_TX_PIO) 431 enable_tx_pio(ourport); 432 } 433 434 static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, 435 unsigned int count) 436 { 437 struct uart_port *port = &ourport->port; 438 struct circ_buf *xmit = &port->state->xmit; 439 struct s3c24xx_uart_dma *dma = ourport->dma; 440 441 if (ourport->tx_mode != S3C24XX_TX_DMA) 442 enable_tx_dma(ourport); 443 444 dma->tx_size = count & ~(dma_get_cache_alignment() - 1); 445 dma->tx_transfer_addr = dma->tx_addr + xmit->tail; 446 447 dma_sync_single_for_device(dma->tx_chan->device->dev, 448 dma->tx_transfer_addr, dma->tx_size, 449 DMA_TO_DEVICE); 450 451 dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan, 452 dma->tx_transfer_addr, dma->tx_size, 453 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); 454 if (!dma->tx_desc) { 455 dev_err(ourport->port.dev, "Unable to get desc for Tx\n"); 456 return -EIO; 457 } 458 459 dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete; 460 dma->tx_desc->callback_param = ourport; 461 dma->tx_bytes_requested = dma->tx_size; 462 463 ourport->tx_in_progress = S3C24XX_TX_DMA; 464 dma->tx_cookie = dmaengine_submit(dma->tx_desc); 465 dma_async_issue_pending(dma->tx_chan); 466 return 0; 467 } 468 469 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) 470 { 471 struct uart_port *port = &ourport->port; 472 struct circ_buf *xmit = &port->state->xmit; 473 unsigned long count; 474 475 /* Get data size up to the end of buffer */ 476 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 477 478 if (!count) { 479 s3c24xx_serial_stop_tx(port); 480 return; 481 } 482 483 if (!ourport->dma || !ourport->dma->tx_chan || 484 count < ourport->min_dma_size || 485 xmit->tail & (dma_get_cache_alignment() - 1)) 486 s3c24xx_serial_start_tx_pio(ourport); 487 else 488 s3c24xx_serial_start_tx_dma(ourport, count); 489 } 490 491 static void s3c24xx_serial_start_tx(struct uart_port *port) 492 { 493 struct s3c24xx_uart_port *ourport = to_ourport(port); 494 struct circ_buf *xmit = &port->state->xmit; 495 496 if (!ourport->tx_enabled) { 497 if (port->flags & UPF_CONS_FLOW) 498 s3c24xx_serial_rx_disable(port); 499 500 ourport->tx_enabled = 1; 501 if (!ourport->dma || !ourport->dma->tx_chan) 502 s3c24xx_serial_start_tx_pio(ourport); 503 } 504 505 if (ourport->dma && ourport->dma->tx_chan) { 506 if (!uart_circ_empty(xmit) && !ourport->tx_in_progress) 507 s3c24xx_serial_start_next_tx(ourport); 508 } 509 } 510 511 static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, 512 struct tty_port *tty, int count) 513 { 514 struct s3c24xx_uart_dma *dma = ourport->dma; 515 int copied; 516 517 if (!count) 518 return; 519 520 dma_sync_single_for_cpu(dma->rx_chan->device->dev, dma->rx_addr, 521 dma->rx_size, DMA_FROM_DEVICE); 522 523 ourport->port.icount.rx += count; 524 if (!tty) { 525 dev_err(ourport->port.dev, "No tty port\n"); 526 return; 527 } 528 copied = tty_insert_flip_string(tty, 529 ((unsigned char *)(ourport->dma->rx_buf)), count); 530 if (copied != count) { 531 WARN_ON(1); 532 dev_err(ourport->port.dev, "RxData copy to tty layer failed\n"); 533 } 534 } 535 536 static void s3c24xx_serial_stop_rx(struct uart_port *port) 537 { 538 struct s3c24xx_uart_port *ourport = to_ourport(port); 539 struct s3c24xx_uart_dma *dma = ourport->dma; 540 struct tty_port *t = &port->state->port; 541 struct dma_tx_state state; 542 enum dma_status dma_status; 543 unsigned int received; 544 545 if (ourport->rx_enabled) { 546 dev_dbg(port->dev, "stopping rx\n"); 547 switch (ourport->info->type) { 548 case TYPE_S3C6400: 549 s3c24xx_set_bit(port, S3C64XX_UINTM_RXD, 550 S3C64XX_UINTM); 551 break; 552 case TYPE_APPLE_S5L: 553 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); 554 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON); 555 break; 556 default: 557 disable_irq_nosync(ourport->rx_irq); 558 break; 559 } 560 ourport->rx_enabled = 0; 561 } 562 if (dma && dma->rx_chan) { 563 dmaengine_pause(dma->tx_chan); 564 dma_status = dmaengine_tx_status(dma->rx_chan, 565 dma->rx_cookie, &state); 566 if (dma_status == DMA_IN_PROGRESS || 567 dma_status == DMA_PAUSED) { 568 received = dma->rx_bytes_requested - state.residue; 569 dmaengine_terminate_all(dma->rx_chan); 570 s3c24xx_uart_copy_rx_to_tty(ourport, t, received); 571 } 572 } 573 } 574 575 static inline const struct s3c24xx_uart_info 576 *s3c24xx_port_to_info(struct uart_port *port) 577 { 578 return to_ourport(port)->info; 579 } 580 581 static inline const struct s3c2410_uartcfg 582 *s3c24xx_port_to_cfg(const struct uart_port *port) 583 { 584 const struct s3c24xx_uart_port *ourport; 585 586 if (port->dev == NULL) 587 return NULL; 588 589 ourport = container_of(port, struct s3c24xx_uart_port, port); 590 return ourport->cfg; 591 } 592 593 static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport, 594 unsigned long ufstat) 595 { 596 const struct s3c24xx_uart_info *info = ourport->info; 597 598 if (ufstat & info->rx_fifofull) 599 return ourport->port.fifosize; 600 601 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; 602 } 603 604 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport); 605 static void s3c24xx_serial_rx_dma_complete(void *args) 606 { 607 struct s3c24xx_uart_port *ourport = args; 608 struct uart_port *port = &ourport->port; 609 610 struct s3c24xx_uart_dma *dma = ourport->dma; 611 struct tty_port *t = &port->state->port; 612 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); 613 614 struct dma_tx_state state; 615 unsigned long flags; 616 int received; 617 618 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); 619 received = dma->rx_bytes_requested - state.residue; 620 async_tx_ack(dma->rx_desc); 621 622 spin_lock_irqsave(&port->lock, flags); 623 624 if (received) 625 s3c24xx_uart_copy_rx_to_tty(ourport, t, received); 626 627 if (tty) { 628 tty_flip_buffer_push(t); 629 tty_kref_put(tty); 630 } 631 632 s3c64xx_start_rx_dma(ourport); 633 634 spin_unlock_irqrestore(&port->lock, flags); 635 } 636 637 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) 638 { 639 struct s3c24xx_uart_dma *dma = ourport->dma; 640 641 dma_sync_single_for_device(dma->rx_chan->device->dev, dma->rx_addr, 642 dma->rx_size, DMA_FROM_DEVICE); 643 644 dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan, 645 dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, 646 DMA_PREP_INTERRUPT); 647 if (!dma->rx_desc) { 648 dev_err(ourport->port.dev, "Unable to get desc for Rx\n"); 649 return; 650 } 651 652 dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete; 653 dma->rx_desc->callback_param = ourport; 654 dma->rx_bytes_requested = dma->rx_size; 655 656 dma->rx_cookie = dmaengine_submit(dma->rx_desc); 657 dma_async_issue_pending(dma->rx_chan); 658 } 659 660 /* ? - where has parity gone?? */ 661 #define S3C2410_UERSTAT_PARITY (0x1000) 662 663 static void enable_rx_dma(struct s3c24xx_uart_port *ourport) 664 { 665 struct uart_port *port = &ourport->port; 666 unsigned int ucon; 667 668 /* set Rx mode to DMA mode */ 669 ucon = rd_regl(port, S3C2410_UCON); 670 ucon &= ~(S3C64XX_UCON_RXBURST_MASK | 671 S3C64XX_UCON_TIMEOUT_MASK | 672 S3C64XX_UCON_EMPTYINT_EN | 673 S3C64XX_UCON_DMASUS_EN | 674 S3C64XX_UCON_TIMEOUT_EN | 675 S3C64XX_UCON_RXMODE_MASK); 676 ucon |= S3C64XX_UCON_RXBURST_1 | 677 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | 678 S3C64XX_UCON_EMPTYINT_EN | 679 S3C64XX_UCON_TIMEOUT_EN | 680 S3C64XX_UCON_RXMODE_DMA; 681 wr_regl(port, S3C2410_UCON, ucon); 682 683 ourport->rx_mode = S3C24XX_RX_DMA; 684 } 685 686 static void enable_rx_pio(struct s3c24xx_uart_port *ourport) 687 { 688 struct uart_port *port = &ourport->port; 689 unsigned int ucon; 690 691 /* set Rx mode to DMA mode */ 692 ucon = rd_regl(port, S3C2410_UCON); 693 ucon &= ~S3C64XX_UCON_RXMODE_MASK; 694 ucon |= S3C64XX_UCON_RXMODE_CPU; 695 696 /* Apple types use these bits for IRQ masks */ 697 if (ourport->info->type != TYPE_APPLE_S5L) { 698 ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | 699 S3C64XX_UCON_EMPTYINT_EN | 700 S3C64XX_UCON_DMASUS_EN | 701 S3C64XX_UCON_TIMEOUT_EN); 702 ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | 703 S3C64XX_UCON_TIMEOUT_EN; 704 } 705 wr_regl(port, S3C2410_UCON, ucon); 706 707 ourport->rx_mode = S3C24XX_RX_PIO; 708 } 709 710 static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); 711 712 static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) 713 { 714 unsigned int utrstat, received; 715 struct s3c24xx_uart_port *ourport = dev_id; 716 struct uart_port *port = &ourport->port; 717 struct s3c24xx_uart_dma *dma = ourport->dma; 718 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); 719 struct tty_port *t = &port->state->port; 720 struct dma_tx_state state; 721 722 utrstat = rd_regl(port, S3C2410_UTRSTAT); 723 rd_regl(port, S3C2410_UFSTAT); 724 725 spin_lock(&port->lock); 726 727 if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { 728 s3c64xx_start_rx_dma(ourport); 729 if (ourport->rx_mode == S3C24XX_RX_PIO) 730 enable_rx_dma(ourport); 731 goto finish; 732 } 733 734 if (ourport->rx_mode == S3C24XX_RX_DMA) { 735 dmaengine_pause(dma->rx_chan); 736 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); 737 dmaengine_terminate_all(dma->rx_chan); 738 received = dma->rx_bytes_requested - state.residue; 739 s3c24xx_uart_copy_rx_to_tty(ourport, t, received); 740 741 enable_rx_pio(ourport); 742 } 743 744 s3c24xx_serial_rx_drain_fifo(ourport); 745 746 if (tty) { 747 tty_flip_buffer_push(t); 748 tty_kref_put(tty); 749 } 750 751 wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); 752 753 finish: 754 spin_unlock(&port->lock); 755 756 return IRQ_HANDLED; 757 } 758 759 static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport) 760 { 761 struct uart_port *port = &ourport->port; 762 unsigned int ufcon, ch, flag, ufstat, uerstat; 763 unsigned int fifocnt = 0; 764 int max_count = port->fifosize; 765 766 while (max_count-- > 0) { 767 /* 768 * Receive all characters known to be in FIFO 769 * before reading FIFO level again 770 */ 771 if (fifocnt == 0) { 772 ufstat = rd_regl(port, S3C2410_UFSTAT); 773 fifocnt = s3c24xx_serial_rx_fifocnt(ourport, ufstat); 774 if (fifocnt == 0) 775 break; 776 } 777 fifocnt--; 778 779 uerstat = rd_regl(port, S3C2410_UERSTAT); 780 ch = rd_reg(port, S3C2410_URXH); 781 782 if (port->flags & UPF_CONS_FLOW) { 783 int txe = s3c24xx_serial_txempty_nofifo(port); 784 785 if (ourport->rx_enabled) { 786 if (!txe) { 787 ourport->rx_enabled = 0; 788 continue; 789 } 790 } else { 791 if (txe) { 792 ufcon = rd_regl(port, S3C2410_UFCON); 793 ufcon |= S3C2410_UFCON_RESETRX; 794 wr_regl(port, S3C2410_UFCON, ufcon); 795 ourport->rx_enabled = 1; 796 return; 797 } 798 continue; 799 } 800 } 801 802 /* insert the character into the buffer */ 803 804 flag = TTY_NORMAL; 805 port->icount.rx++; 806 807 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { 808 dev_dbg(port->dev, 809 "rxerr: port ch=0x%02x, rxs=0x%08x\n", 810 ch, uerstat); 811 812 /* check for break */ 813 if (uerstat & S3C2410_UERSTAT_BREAK) { 814 dev_dbg(port->dev, "break!\n"); 815 port->icount.brk++; 816 if (uart_handle_break(port)) 817 continue; /* Ignore character */ 818 } 819 820 if (uerstat & S3C2410_UERSTAT_FRAME) 821 port->icount.frame++; 822 if (uerstat & S3C2410_UERSTAT_OVERRUN) 823 port->icount.overrun++; 824 825 uerstat &= port->read_status_mask; 826 827 if (uerstat & S3C2410_UERSTAT_BREAK) 828 flag = TTY_BREAK; 829 else if (uerstat & S3C2410_UERSTAT_PARITY) 830 flag = TTY_PARITY; 831 else if (uerstat & (S3C2410_UERSTAT_FRAME | 832 S3C2410_UERSTAT_OVERRUN)) 833 flag = TTY_FRAME; 834 } 835 836 if (uart_handle_sysrq_char(port, ch)) 837 continue; /* Ignore character */ 838 839 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, 840 ch, flag); 841 } 842 843 tty_flip_buffer_push(&port->state->port); 844 } 845 846 static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) 847 { 848 struct s3c24xx_uart_port *ourport = dev_id; 849 struct uart_port *port = &ourport->port; 850 851 spin_lock(&port->lock); 852 s3c24xx_serial_rx_drain_fifo(ourport); 853 spin_unlock(&port->lock); 854 855 return IRQ_HANDLED; 856 } 857 858 static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id) 859 { 860 struct s3c24xx_uart_port *ourport = dev_id; 861 862 if (ourport->dma && ourport->dma->rx_chan) 863 return s3c24xx_serial_rx_chars_dma(dev_id); 864 return s3c24xx_serial_rx_chars_pio(dev_id); 865 } 866 867 static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport) 868 { 869 struct uart_port *port = &ourport->port; 870 struct circ_buf *xmit = &port->state->xmit; 871 int count, dma_count = 0; 872 873 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 874 875 if (ourport->dma && ourport->dma->tx_chan && 876 count >= ourport->min_dma_size) { 877 int align = dma_get_cache_alignment() - 878 (xmit->tail & (dma_get_cache_alignment() - 1)); 879 if (count - align >= ourport->min_dma_size) { 880 dma_count = count - align; 881 count = align; 882 } 883 } 884 885 if (port->x_char) { 886 wr_reg(port, S3C2410_UTXH, port->x_char); 887 port->icount.tx++; 888 port->x_char = 0; 889 return; 890 } 891 892 /* if there isn't anything more to transmit, or the uart is now 893 * stopped, disable the uart and exit 894 */ 895 896 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 897 s3c24xx_serial_stop_tx(port); 898 return; 899 } 900 901 /* try and drain the buffer... */ 902 903 if (count > port->fifosize) { 904 count = port->fifosize; 905 dma_count = 0; 906 } 907 908 while (!uart_circ_empty(xmit) && count > 0) { 909 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) 910 break; 911 912 wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]); 913 uart_xmit_advance(port, 1); 914 count--; 915 } 916 917 if (!count && dma_count) { 918 s3c24xx_serial_start_tx_dma(ourport, dma_count); 919 return; 920 } 921 922 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 923 uart_write_wakeup(port); 924 925 if (uart_circ_empty(xmit)) 926 s3c24xx_serial_stop_tx(port); 927 } 928 929 static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id) 930 { 931 struct s3c24xx_uart_port *ourport = id; 932 struct uart_port *port = &ourport->port; 933 934 spin_lock(&port->lock); 935 936 s3c24xx_serial_tx_chars(ourport); 937 938 spin_unlock(&port->lock); 939 return IRQ_HANDLED; 940 } 941 942 /* interrupt handler for s3c64xx and later SoC's.*/ 943 static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) 944 { 945 const struct s3c24xx_uart_port *ourport = id; 946 const struct uart_port *port = &ourport->port; 947 unsigned int pend = rd_regl(port, S3C64XX_UINTP); 948 irqreturn_t ret = IRQ_HANDLED; 949 950 if (pend & S3C64XX_UINTM_RXD_MSK) { 951 ret = s3c24xx_serial_rx_irq(irq, id); 952 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); 953 } 954 if (pend & S3C64XX_UINTM_TXD_MSK) { 955 ret = s3c24xx_serial_tx_irq(irq, id); 956 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); 957 } 958 return ret; 959 } 960 961 /* interrupt handler for Apple SoC's.*/ 962 static irqreturn_t apple_serial_handle_irq(int irq, void *id) 963 { 964 const struct s3c24xx_uart_port *ourport = id; 965 const struct uart_port *port = &ourport->port; 966 unsigned int pend = rd_regl(port, S3C2410_UTRSTAT); 967 irqreturn_t ret = IRQ_NONE; 968 969 if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) { 970 wr_regl(port, S3C2410_UTRSTAT, 971 APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO); 972 ret = s3c24xx_serial_rx_irq(irq, id); 973 } 974 if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) { 975 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH); 976 ret = s3c24xx_serial_tx_irq(irq, id); 977 } 978 979 return ret; 980 } 981 982 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) 983 { 984 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 985 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); 986 unsigned long ufcon = rd_regl(port, S3C2410_UFCON); 987 988 if (ufcon & S3C2410_UFCON_FIFOMODE) { 989 if ((ufstat & info->tx_fifomask) != 0 || 990 (ufstat & info->tx_fifofull)) 991 return 0; 992 993 return 1; 994 } 995 996 return s3c24xx_serial_txempty_nofifo(port); 997 } 998 999 /* no modem control lines */ 1000 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) 1001 { 1002 unsigned int umstat = rd_reg(port, S3C2410_UMSTAT); 1003 1004 if (umstat & S3C2410_UMSTAT_CTS) 1005 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; 1006 else 1007 return TIOCM_CAR | TIOCM_DSR; 1008 } 1009 1010 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) 1011 { 1012 unsigned int umcon = rd_regl(port, S3C2410_UMCON); 1013 unsigned int ucon = rd_regl(port, S3C2410_UCON); 1014 1015 if (mctrl & TIOCM_RTS) 1016 umcon |= S3C2410_UMCOM_RTS_LOW; 1017 else 1018 umcon &= ~S3C2410_UMCOM_RTS_LOW; 1019 1020 wr_regl(port, S3C2410_UMCON, umcon); 1021 1022 if (mctrl & TIOCM_LOOP) 1023 ucon |= S3C2410_UCON_LOOPBACK; 1024 else 1025 ucon &= ~S3C2410_UCON_LOOPBACK; 1026 1027 wr_regl(port, S3C2410_UCON, ucon); 1028 } 1029 1030 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) 1031 { 1032 unsigned long flags; 1033 unsigned int ucon; 1034 1035 spin_lock_irqsave(&port->lock, flags); 1036 1037 ucon = rd_regl(port, S3C2410_UCON); 1038 1039 if (break_state) 1040 ucon |= S3C2410_UCON_SBREAK; 1041 else 1042 ucon &= ~S3C2410_UCON_SBREAK; 1043 1044 wr_regl(port, S3C2410_UCON, ucon); 1045 1046 spin_unlock_irqrestore(&port->lock, flags); 1047 } 1048 1049 static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) 1050 { 1051 struct s3c24xx_uart_dma *dma = p->dma; 1052 struct dma_slave_caps dma_caps; 1053 const char *reason = NULL; 1054 int ret; 1055 1056 /* Default slave configuration parameters */ 1057 dma->rx_conf.direction = DMA_DEV_TO_MEM; 1058 dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 1059 dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; 1060 dma->rx_conf.src_maxburst = 1; 1061 1062 dma->tx_conf.direction = DMA_MEM_TO_DEV; 1063 dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 1064 dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; 1065 dma->tx_conf.dst_maxburst = 1; 1066 1067 dma->rx_chan = dma_request_chan(p->port.dev, "rx"); 1068 1069 if (IS_ERR(dma->rx_chan)) { 1070 reason = "DMA RX channel request failed"; 1071 ret = PTR_ERR(dma->rx_chan); 1072 goto err_warn; 1073 } 1074 1075 ret = dma_get_slave_caps(dma->rx_chan, &dma_caps); 1076 if (ret < 0 || 1077 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) { 1078 reason = "insufficient DMA RX engine capabilities"; 1079 ret = -EOPNOTSUPP; 1080 goto err_release_rx; 1081 } 1082 1083 dmaengine_slave_config(dma->rx_chan, &dma->rx_conf); 1084 1085 dma->tx_chan = dma_request_chan(p->port.dev, "tx"); 1086 if (IS_ERR(dma->tx_chan)) { 1087 reason = "DMA TX channel request failed"; 1088 ret = PTR_ERR(dma->tx_chan); 1089 goto err_release_rx; 1090 } 1091 1092 ret = dma_get_slave_caps(dma->tx_chan, &dma_caps); 1093 if (ret < 0 || 1094 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) { 1095 reason = "insufficient DMA TX engine capabilities"; 1096 ret = -EOPNOTSUPP; 1097 goto err_release_tx; 1098 } 1099 1100 dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); 1101 1102 /* RX buffer */ 1103 dma->rx_size = PAGE_SIZE; 1104 1105 dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); 1106 if (!dma->rx_buf) { 1107 ret = -ENOMEM; 1108 goto err_release_tx; 1109 } 1110 1111 dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, 1112 dma->rx_size, DMA_FROM_DEVICE); 1113 if (dma_mapping_error(dma->rx_chan->device->dev, dma->rx_addr)) { 1114 reason = "DMA mapping error for RX buffer"; 1115 ret = -EIO; 1116 goto err_free_rx; 1117 } 1118 1119 /* TX buffer */ 1120 dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, 1121 p->port.state->xmit.buf, UART_XMIT_SIZE, 1122 DMA_TO_DEVICE); 1123 if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) { 1124 reason = "DMA mapping error for TX buffer"; 1125 ret = -EIO; 1126 goto err_unmap_rx; 1127 } 1128 1129 return 0; 1130 1131 err_unmap_rx: 1132 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, 1133 dma->rx_size, DMA_FROM_DEVICE); 1134 err_free_rx: 1135 kfree(dma->rx_buf); 1136 err_release_tx: 1137 dma_release_channel(dma->tx_chan); 1138 err_release_rx: 1139 dma_release_channel(dma->rx_chan); 1140 err_warn: 1141 if (reason) 1142 dev_warn(p->port.dev, "%s, DMA will not be used\n", reason); 1143 return ret; 1144 } 1145 1146 static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) 1147 { 1148 struct s3c24xx_uart_dma *dma = p->dma; 1149 1150 if (dma->rx_chan) { 1151 dmaengine_terminate_all(dma->rx_chan); 1152 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, 1153 dma->rx_size, DMA_FROM_DEVICE); 1154 kfree(dma->rx_buf); 1155 dma_release_channel(dma->rx_chan); 1156 dma->rx_chan = NULL; 1157 } 1158 1159 if (dma->tx_chan) { 1160 dmaengine_terminate_all(dma->tx_chan); 1161 dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, 1162 UART_XMIT_SIZE, DMA_TO_DEVICE); 1163 dma_release_channel(dma->tx_chan); 1164 dma->tx_chan = NULL; 1165 } 1166 } 1167 1168 static void s3c24xx_serial_shutdown(struct uart_port *port) 1169 { 1170 struct s3c24xx_uart_port *ourport = to_ourport(port); 1171 1172 if (ourport->tx_claimed) { 1173 free_irq(ourport->tx_irq, ourport); 1174 ourport->tx_enabled = 0; 1175 ourport->tx_claimed = 0; 1176 ourport->tx_mode = 0; 1177 } 1178 1179 if (ourport->rx_claimed) { 1180 free_irq(ourport->rx_irq, ourport); 1181 ourport->rx_claimed = 0; 1182 ourport->rx_enabled = 0; 1183 } 1184 1185 if (ourport->dma) 1186 s3c24xx_serial_release_dma(ourport); 1187 1188 ourport->tx_in_progress = 0; 1189 } 1190 1191 static void s3c64xx_serial_shutdown(struct uart_port *port) 1192 { 1193 struct s3c24xx_uart_port *ourport = to_ourport(port); 1194 1195 ourport->tx_enabled = 0; 1196 ourport->tx_mode = 0; 1197 ourport->rx_enabled = 0; 1198 1199 free_irq(port->irq, ourport); 1200 1201 wr_regl(port, S3C64XX_UINTP, 0xf); 1202 wr_regl(port, S3C64XX_UINTM, 0xf); 1203 1204 if (ourport->dma) 1205 s3c24xx_serial_release_dma(ourport); 1206 1207 ourport->tx_in_progress = 0; 1208 } 1209 1210 static void apple_s5l_serial_shutdown(struct uart_port *port) 1211 { 1212 struct s3c24xx_uart_port *ourport = to_ourport(port); 1213 1214 unsigned int ucon; 1215 1216 ucon = rd_regl(port, S3C2410_UCON); 1217 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | 1218 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 1219 APPLE_S5L_UCON_RXTO_ENA_MSK); 1220 wr_regl(port, S3C2410_UCON, ucon); 1221 1222 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); 1223 1224 free_irq(port->irq, ourport); 1225 1226 ourport->tx_enabled = 0; 1227 ourport->tx_mode = 0; 1228 ourport->rx_enabled = 0; 1229 1230 if (ourport->dma) 1231 s3c24xx_serial_release_dma(ourport); 1232 1233 ourport->tx_in_progress = 0; 1234 } 1235 1236 static int s3c24xx_serial_startup(struct uart_port *port) 1237 { 1238 struct s3c24xx_uart_port *ourport = to_ourport(port); 1239 int ret; 1240 1241 ourport->rx_enabled = 1; 1242 1243 ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0, 1244 s3c24xx_serial_portname(port), ourport); 1245 1246 if (ret != 0) { 1247 dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); 1248 return ret; 1249 } 1250 1251 ourport->rx_claimed = 1; 1252 1253 dev_dbg(port->dev, "requesting tx irq...\n"); 1254 1255 ourport->tx_enabled = 1; 1256 1257 ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0, 1258 s3c24xx_serial_portname(port), ourport); 1259 1260 if (ret) { 1261 dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); 1262 goto err; 1263 } 1264 1265 ourport->tx_claimed = 1; 1266 1267 /* the port reset code should have done the correct 1268 * register setup for the port controls 1269 */ 1270 1271 return ret; 1272 1273 err: 1274 s3c24xx_serial_shutdown(port); 1275 return ret; 1276 } 1277 1278 static int s3c64xx_serial_startup(struct uart_port *port) 1279 { 1280 struct s3c24xx_uart_port *ourport = to_ourport(port); 1281 unsigned long flags; 1282 unsigned int ufcon; 1283 int ret; 1284 1285 wr_regl(port, S3C64XX_UINTM, 0xf); 1286 if (ourport->dma) { 1287 ret = s3c24xx_serial_request_dma(ourport); 1288 if (ret < 0) { 1289 devm_kfree(port->dev, ourport->dma); 1290 ourport->dma = NULL; 1291 } 1292 } 1293 1294 ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, 1295 s3c24xx_serial_portname(port), ourport); 1296 if (ret) { 1297 dev_err(port->dev, "cannot get irq %d\n", port->irq); 1298 return ret; 1299 } 1300 1301 /* For compatibility with s3c24xx Soc's */ 1302 ourport->rx_enabled = 1; 1303 ourport->tx_enabled = 0; 1304 1305 spin_lock_irqsave(&port->lock, flags); 1306 1307 ufcon = rd_regl(port, S3C2410_UFCON); 1308 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; 1309 if (!uart_console(port)) 1310 ufcon |= S3C2410_UFCON_RESETTX; 1311 wr_regl(port, S3C2410_UFCON, ufcon); 1312 1313 enable_rx_pio(ourport); 1314 1315 spin_unlock_irqrestore(&port->lock, flags); 1316 1317 /* Enable Rx Interrupt */ 1318 s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM); 1319 1320 return ret; 1321 } 1322 1323 static int apple_s5l_serial_startup(struct uart_port *port) 1324 { 1325 struct s3c24xx_uart_port *ourport = to_ourport(port); 1326 unsigned long flags; 1327 unsigned int ufcon; 1328 int ret; 1329 1330 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); 1331 1332 ret = request_irq(port->irq, apple_serial_handle_irq, 0, 1333 s3c24xx_serial_portname(port), ourport); 1334 if (ret) { 1335 dev_err(port->dev, "cannot get irq %d\n", port->irq); 1336 return ret; 1337 } 1338 1339 /* For compatibility with s3c24xx Soc's */ 1340 ourport->rx_enabled = 1; 1341 ourport->tx_enabled = 0; 1342 1343 spin_lock_irqsave(&port->lock, flags); 1344 1345 ufcon = rd_regl(port, S3C2410_UFCON); 1346 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; 1347 if (!uart_console(port)) 1348 ufcon |= S3C2410_UFCON_RESETTX; 1349 wr_regl(port, S3C2410_UFCON, ufcon); 1350 1351 enable_rx_pio(ourport); 1352 1353 spin_unlock_irqrestore(&port->lock, flags); 1354 1355 /* Enable Rx Interrupt */ 1356 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); 1357 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON); 1358 1359 return ret; 1360 } 1361 1362 /* power power management control */ 1363 1364 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, 1365 unsigned int old) 1366 { 1367 struct s3c24xx_uart_port *ourport = to_ourport(port); 1368 int timeout = 10000; 1369 1370 ourport->pm_level = level; 1371 1372 switch (level) { 1373 case 3: 1374 while (--timeout && !s3c24xx_serial_txempty_nofifo(port)) 1375 udelay(100); 1376 1377 if (!IS_ERR(ourport->baudclk)) 1378 clk_disable_unprepare(ourport->baudclk); 1379 1380 clk_disable_unprepare(ourport->clk); 1381 break; 1382 1383 case 0: 1384 clk_prepare_enable(ourport->clk); 1385 1386 if (!IS_ERR(ourport->baudclk)) 1387 clk_prepare_enable(ourport->baudclk); 1388 break; 1389 default: 1390 dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); 1391 } 1392 } 1393 1394 /* baud rate calculation 1395 * 1396 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number 1397 * of different sources, including the peripheral clock ("pclk") and an 1398 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") 1399 * with a programmable extra divisor. 1400 * 1401 * The following code goes through the clock sources, and calculates the 1402 * baud clocks (and the resultant actual baud rates) and then tries to 1403 * pick the closest one and select that. 1404 * 1405 */ 1406 1407 #define MAX_CLK_NAME_LENGTH 15 1408 1409 static inline int s3c24xx_serial_getsource(struct uart_port *port) 1410 { 1411 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1412 unsigned int ucon; 1413 1414 if (info->num_clks == 1) 1415 return 0; 1416 1417 ucon = rd_regl(port, S3C2410_UCON); 1418 ucon &= info->clksel_mask; 1419 return ucon >> info->clksel_shift; 1420 } 1421 1422 static void s3c24xx_serial_setsource(struct uart_port *port, 1423 unsigned int clk_sel) 1424 { 1425 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1426 unsigned int ucon; 1427 1428 if (info->num_clks == 1) 1429 return; 1430 1431 ucon = rd_regl(port, S3C2410_UCON); 1432 if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) 1433 return; 1434 1435 ucon &= ~info->clksel_mask; 1436 ucon |= clk_sel << info->clksel_shift; 1437 wr_regl(port, S3C2410_UCON, ucon); 1438 } 1439 1440 static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, 1441 unsigned int req_baud, struct clk **best_clk, 1442 unsigned int *clk_num) 1443 { 1444 const struct s3c24xx_uart_info *info = ourport->info; 1445 struct clk *clk; 1446 unsigned long rate; 1447 unsigned int cnt, baud, quot, best_quot = 0; 1448 char clkname[MAX_CLK_NAME_LENGTH]; 1449 int calc_deviation, deviation = (1 << 30) - 1; 1450 1451 for (cnt = 0; cnt < info->num_clks; cnt++) { 1452 /* Keep selected clock if provided */ 1453 if (ourport->cfg->clk_sel && 1454 !(ourport->cfg->clk_sel & (1 << cnt))) 1455 continue; 1456 1457 sprintf(clkname, "clk_uart_baud%d", cnt); 1458 clk = clk_get(ourport->port.dev, clkname); 1459 if (IS_ERR(clk)) 1460 continue; 1461 1462 rate = clk_get_rate(clk); 1463 if (!rate) { 1464 dev_err(ourport->port.dev, 1465 "Failed to get clock rate for %s.\n", clkname); 1466 clk_put(clk); 1467 continue; 1468 } 1469 1470 if (ourport->info->has_divslot) { 1471 unsigned long div = rate / req_baud; 1472 1473 /* The UDIVSLOT register on the newer UARTs allows us to 1474 * get a divisor adjustment of 1/16th on the baud clock. 1475 * 1476 * We don't keep the UDIVSLOT value (the 16ths we 1477 * calculated by not multiplying the baud by 16) as it 1478 * is easy enough to recalculate. 1479 */ 1480 1481 quot = div / 16; 1482 baud = rate / div; 1483 } else { 1484 quot = (rate + (8 * req_baud)) / (16 * req_baud); 1485 baud = rate / (quot * 16); 1486 } 1487 quot--; 1488 1489 calc_deviation = abs(req_baud - baud); 1490 1491 if (calc_deviation < deviation) { 1492 /* 1493 * If we find a better clk, release the previous one, if 1494 * any. 1495 */ 1496 if (!IS_ERR(*best_clk)) 1497 clk_put(*best_clk); 1498 *best_clk = clk; 1499 best_quot = quot; 1500 *clk_num = cnt; 1501 deviation = calc_deviation; 1502 } else { 1503 clk_put(clk); 1504 } 1505 } 1506 1507 return best_quot; 1508 } 1509 1510 /* udivslot_table[] 1511 * 1512 * This table takes the fractional value of the baud divisor and gives 1513 * the recommended setting for the UDIVSLOT register. 1514 */ 1515 static const u16 udivslot_table[16] = { 1516 [0] = 0x0000, 1517 [1] = 0x0080, 1518 [2] = 0x0808, 1519 [3] = 0x0888, 1520 [4] = 0x2222, 1521 [5] = 0x4924, 1522 [6] = 0x4A52, 1523 [7] = 0x54AA, 1524 [8] = 0x5555, 1525 [9] = 0xD555, 1526 [10] = 0xD5D5, 1527 [11] = 0xDDD5, 1528 [12] = 0xDDDD, 1529 [13] = 0xDFDD, 1530 [14] = 0xDFDF, 1531 [15] = 0xFFDF, 1532 }; 1533 1534 static void s3c24xx_serial_set_termios(struct uart_port *port, 1535 struct ktermios *termios, 1536 const struct ktermios *old) 1537 { 1538 const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); 1539 struct s3c24xx_uart_port *ourport = to_ourport(port); 1540 struct clk *clk = ERR_PTR(-EINVAL); 1541 unsigned long flags; 1542 unsigned int baud, quot, clk_sel = 0; 1543 unsigned int ulcon; 1544 unsigned int umcon; 1545 unsigned int udivslot = 0; 1546 1547 /* 1548 * We don't support modem control lines. 1549 */ 1550 termios->c_cflag &= ~(HUPCL | CMSPAR); 1551 termios->c_cflag |= CLOCAL; 1552 1553 /* 1554 * Ask the core to calculate the divisor for us. 1555 */ 1556 1557 baud = uart_get_baud_rate(port, termios, old, 0, 3000000); 1558 quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); 1559 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) 1560 quot = port->custom_divisor; 1561 if (IS_ERR(clk)) 1562 return; 1563 1564 /* check to see if we need to change clock source */ 1565 1566 if (ourport->baudclk != clk) { 1567 clk_prepare_enable(clk); 1568 1569 s3c24xx_serial_setsource(port, clk_sel); 1570 1571 if (!IS_ERR(ourport->baudclk)) { 1572 clk_disable_unprepare(ourport->baudclk); 1573 ourport->baudclk = ERR_PTR(-EINVAL); 1574 } 1575 1576 ourport->baudclk = clk; 1577 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; 1578 } 1579 1580 if (ourport->info->has_divslot) { 1581 unsigned int div = ourport->baudclk_rate / baud; 1582 1583 if (cfg->has_fracval) { 1584 udivslot = (div & 15); 1585 dev_dbg(port->dev, "fracval = %04x\n", udivslot); 1586 } else { 1587 udivslot = udivslot_table[div & 15]; 1588 dev_dbg(port->dev, "udivslot = %04x (div %d)\n", 1589 udivslot, div & 15); 1590 } 1591 } 1592 1593 switch (termios->c_cflag & CSIZE) { 1594 case CS5: 1595 dev_dbg(port->dev, "config: 5bits/char\n"); 1596 ulcon = S3C2410_LCON_CS5; 1597 break; 1598 case CS6: 1599 dev_dbg(port->dev, "config: 6bits/char\n"); 1600 ulcon = S3C2410_LCON_CS6; 1601 break; 1602 case CS7: 1603 dev_dbg(port->dev, "config: 7bits/char\n"); 1604 ulcon = S3C2410_LCON_CS7; 1605 break; 1606 case CS8: 1607 default: 1608 dev_dbg(port->dev, "config: 8bits/char\n"); 1609 ulcon = S3C2410_LCON_CS8; 1610 break; 1611 } 1612 1613 /* preserve original lcon IR settings */ 1614 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); 1615 1616 if (termios->c_cflag & CSTOPB) 1617 ulcon |= S3C2410_LCON_STOPB; 1618 1619 if (termios->c_cflag & PARENB) { 1620 if (termios->c_cflag & PARODD) 1621 ulcon |= S3C2410_LCON_PODD; 1622 else 1623 ulcon |= S3C2410_LCON_PEVEN; 1624 } else { 1625 ulcon |= S3C2410_LCON_PNONE; 1626 } 1627 1628 spin_lock_irqsave(&port->lock, flags); 1629 1630 dev_dbg(port->dev, 1631 "setting ulcon to %08x, brddiv to %d, udivslot %08x\n", 1632 ulcon, quot, udivslot); 1633 1634 wr_regl(port, S3C2410_ULCON, ulcon); 1635 wr_regl(port, S3C2410_UBRDIV, quot); 1636 1637 port->status &= ~UPSTAT_AUTOCTS; 1638 1639 umcon = rd_regl(port, S3C2410_UMCON); 1640 if (termios->c_cflag & CRTSCTS) { 1641 umcon |= S3C2410_UMCOM_AFC; 1642 /* Disable RTS when RX FIFO contains 63 bytes */ 1643 umcon &= ~S3C2412_UMCON_AFC_8; 1644 port->status = UPSTAT_AUTOCTS; 1645 } else { 1646 umcon &= ~S3C2410_UMCOM_AFC; 1647 } 1648 wr_regl(port, S3C2410_UMCON, umcon); 1649 1650 if (ourport->info->has_divslot) 1651 wr_regl(port, S3C2443_DIVSLOT, udivslot); 1652 1653 dev_dbg(port->dev, 1654 "uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", 1655 rd_regl(port, S3C2410_ULCON), 1656 rd_regl(port, S3C2410_UCON), 1657 rd_regl(port, S3C2410_UFCON)); 1658 1659 /* 1660 * Update the per-port timeout. 1661 */ 1662 uart_update_timeout(port, termios->c_cflag, baud); 1663 1664 /* 1665 * Which character status flags are we interested in? 1666 */ 1667 port->read_status_mask = S3C2410_UERSTAT_OVERRUN; 1668 if (termios->c_iflag & INPCK) 1669 port->read_status_mask |= S3C2410_UERSTAT_FRAME | 1670 S3C2410_UERSTAT_PARITY; 1671 /* 1672 * Which character status flags should we ignore? 1673 */ 1674 port->ignore_status_mask = 0; 1675 if (termios->c_iflag & IGNPAR) 1676 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; 1677 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) 1678 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; 1679 1680 /* 1681 * Ignore all characters if CREAD is not set. 1682 */ 1683 if ((termios->c_cflag & CREAD) == 0) 1684 port->ignore_status_mask |= RXSTAT_DUMMY_READ; 1685 1686 spin_unlock_irqrestore(&port->lock, flags); 1687 } 1688 1689 static const char *s3c24xx_serial_type(struct uart_port *port) 1690 { 1691 const struct s3c24xx_uart_port *ourport = to_ourport(port); 1692 1693 switch (ourport->info->type) { 1694 case TYPE_S3C24XX: 1695 return "S3C24XX"; 1696 case TYPE_S3C6400: 1697 return "S3C6400/10"; 1698 case TYPE_APPLE_S5L: 1699 return "APPLE S5L"; 1700 default: 1701 return NULL; 1702 } 1703 } 1704 1705 static void s3c24xx_serial_config_port(struct uart_port *port, int flags) 1706 { 1707 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1708 1709 if (flags & UART_CONFIG_TYPE) 1710 port->type = info->port_type; 1711 } 1712 1713 /* 1714 * verify the new serial_struct (for TIOCSSERIAL). 1715 */ 1716 static int 1717 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) 1718 { 1719 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1720 1721 if (ser->type != PORT_UNKNOWN && ser->type != info->port_type) 1722 return -EINVAL; 1723 1724 return 0; 1725 } 1726 1727 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE 1728 1729 static struct console s3c24xx_serial_console; 1730 1731 static void __init s3c24xx_serial_register_console(void) 1732 { 1733 register_console(&s3c24xx_serial_console); 1734 } 1735 1736 static void s3c24xx_serial_unregister_console(void) 1737 { 1738 if (console_is_registered(&s3c24xx_serial_console)) 1739 unregister_console(&s3c24xx_serial_console); 1740 } 1741 1742 #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console 1743 #else 1744 static inline void s3c24xx_serial_register_console(void) { } 1745 static inline void s3c24xx_serial_unregister_console(void) { } 1746 #define S3C24XX_SERIAL_CONSOLE NULL 1747 #endif 1748 1749 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1750 static int s3c24xx_serial_get_poll_char(struct uart_port *port); 1751 static void s3c24xx_serial_put_poll_char(struct uart_port *port, 1752 unsigned char c); 1753 #endif 1754 1755 static const struct uart_ops s3c24xx_serial_ops = { 1756 .pm = s3c24xx_serial_pm, 1757 .tx_empty = s3c24xx_serial_tx_empty, 1758 .get_mctrl = s3c24xx_serial_get_mctrl, 1759 .set_mctrl = s3c24xx_serial_set_mctrl, 1760 .stop_tx = s3c24xx_serial_stop_tx, 1761 .start_tx = s3c24xx_serial_start_tx, 1762 .stop_rx = s3c24xx_serial_stop_rx, 1763 .break_ctl = s3c24xx_serial_break_ctl, 1764 .startup = s3c24xx_serial_startup, 1765 .shutdown = s3c24xx_serial_shutdown, 1766 .set_termios = s3c24xx_serial_set_termios, 1767 .type = s3c24xx_serial_type, 1768 .config_port = s3c24xx_serial_config_port, 1769 .verify_port = s3c24xx_serial_verify_port, 1770 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1771 .poll_get_char = s3c24xx_serial_get_poll_char, 1772 .poll_put_char = s3c24xx_serial_put_poll_char, 1773 #endif 1774 }; 1775 1776 static const struct uart_ops s3c64xx_serial_ops = { 1777 .pm = s3c24xx_serial_pm, 1778 .tx_empty = s3c24xx_serial_tx_empty, 1779 .get_mctrl = s3c24xx_serial_get_mctrl, 1780 .set_mctrl = s3c24xx_serial_set_mctrl, 1781 .stop_tx = s3c24xx_serial_stop_tx, 1782 .start_tx = s3c24xx_serial_start_tx, 1783 .stop_rx = s3c24xx_serial_stop_rx, 1784 .break_ctl = s3c24xx_serial_break_ctl, 1785 .startup = s3c64xx_serial_startup, 1786 .shutdown = s3c64xx_serial_shutdown, 1787 .set_termios = s3c24xx_serial_set_termios, 1788 .type = s3c24xx_serial_type, 1789 .config_port = s3c24xx_serial_config_port, 1790 .verify_port = s3c24xx_serial_verify_port, 1791 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1792 .poll_get_char = s3c24xx_serial_get_poll_char, 1793 .poll_put_char = s3c24xx_serial_put_poll_char, 1794 #endif 1795 }; 1796 1797 static const struct uart_ops apple_s5l_serial_ops = { 1798 .pm = s3c24xx_serial_pm, 1799 .tx_empty = s3c24xx_serial_tx_empty, 1800 .get_mctrl = s3c24xx_serial_get_mctrl, 1801 .set_mctrl = s3c24xx_serial_set_mctrl, 1802 .stop_tx = s3c24xx_serial_stop_tx, 1803 .start_tx = s3c24xx_serial_start_tx, 1804 .stop_rx = s3c24xx_serial_stop_rx, 1805 .break_ctl = s3c24xx_serial_break_ctl, 1806 .startup = apple_s5l_serial_startup, 1807 .shutdown = apple_s5l_serial_shutdown, 1808 .set_termios = s3c24xx_serial_set_termios, 1809 .type = s3c24xx_serial_type, 1810 .config_port = s3c24xx_serial_config_port, 1811 .verify_port = s3c24xx_serial_verify_port, 1812 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1813 .poll_get_char = s3c24xx_serial_get_poll_char, 1814 .poll_put_char = s3c24xx_serial_put_poll_char, 1815 #endif 1816 }; 1817 1818 static struct uart_driver s3c24xx_uart_drv = { 1819 .owner = THIS_MODULE, 1820 .driver_name = "s3c2410_serial", 1821 .nr = UART_NR, 1822 .cons = S3C24XX_SERIAL_CONSOLE, 1823 .dev_name = S3C24XX_SERIAL_NAME, 1824 .major = S3C24XX_SERIAL_MAJOR, 1825 .minor = S3C24XX_SERIAL_MINOR, 1826 }; 1827 1828 static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR]; 1829 1830 static void s3c24xx_serial_init_port_default(int index) { 1831 struct uart_port *port = &s3c24xx_serial_ports[index].port; 1832 1833 spin_lock_init(&port->lock); 1834 1835 port->iotype = UPIO_MEM; 1836 port->uartclk = 0; 1837 port->fifosize = 16; 1838 port->ops = &s3c24xx_serial_ops; 1839 port->flags = UPF_BOOT_AUTOCONF; 1840 port->line = index; 1841 } 1842 1843 /* s3c24xx_serial_resetport 1844 * 1845 * reset the fifos and other the settings. 1846 */ 1847 1848 static void s3c24xx_serial_resetport(struct uart_port *port, 1849 const struct s3c2410_uartcfg *cfg) 1850 { 1851 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1852 unsigned long ucon = rd_regl(port, S3C2410_UCON); 1853 1854 ucon &= (info->clksel_mask | info->ucon_mask); 1855 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); 1856 1857 /* reset both fifos */ 1858 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); 1859 wr_regl(port, S3C2410_UFCON, cfg->ufcon); 1860 1861 /* some delay is required after fifo reset */ 1862 udelay(1); 1863 } 1864 1865 static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport) 1866 { 1867 struct device *dev = ourport->port.dev; 1868 const struct s3c24xx_uart_info *info = ourport->info; 1869 char clk_name[MAX_CLK_NAME_LENGTH]; 1870 unsigned int clk_sel; 1871 struct clk *clk; 1872 int clk_num; 1873 int ret; 1874 1875 clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel; 1876 for (clk_num = 0; clk_num < info->num_clks; clk_num++) { 1877 if (!(clk_sel & (1 << clk_num))) 1878 continue; 1879 1880 sprintf(clk_name, "clk_uart_baud%d", clk_num); 1881 clk = clk_get(dev, clk_name); 1882 if (IS_ERR(clk)) 1883 continue; 1884 1885 ret = clk_prepare_enable(clk); 1886 if (ret) { 1887 clk_put(clk); 1888 continue; 1889 } 1890 1891 ourport->baudclk = clk; 1892 ourport->baudclk_rate = clk_get_rate(clk); 1893 s3c24xx_serial_setsource(&ourport->port, clk_num); 1894 1895 return 0; 1896 } 1897 1898 return -EINVAL; 1899 } 1900 1901 /* s3c24xx_serial_init_port 1902 * 1903 * initialise a single serial port from the platform device given 1904 */ 1905 1906 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, 1907 struct platform_device *platdev) 1908 { 1909 struct uart_port *port = &ourport->port; 1910 const struct s3c2410_uartcfg *cfg = ourport->cfg; 1911 struct resource *res; 1912 int ret; 1913 1914 if (platdev == NULL) 1915 return -ENODEV; 1916 1917 if (port->mapbase != 0) 1918 return -EINVAL; 1919 1920 /* setup info for port */ 1921 port->dev = &platdev->dev; 1922 1923 port->uartclk = 1; 1924 1925 if (cfg->uart_flags & UPF_CONS_FLOW) { 1926 dev_dbg(port->dev, "enabling flow control\n"); 1927 port->flags |= UPF_CONS_FLOW; 1928 } 1929 1930 /* sort our the physical and virtual addresses for each UART */ 1931 1932 res = platform_get_resource(platdev, IORESOURCE_MEM, 0); 1933 if (res == NULL) { 1934 dev_err(port->dev, "failed to find memory resource for uart\n"); 1935 return -EINVAL; 1936 } 1937 1938 dev_dbg(port->dev, "resource %pR)\n", res); 1939 1940 port->membase = devm_ioremap_resource(port->dev, res); 1941 if (IS_ERR(port->membase)) { 1942 dev_err(port->dev, "failed to remap controller address\n"); 1943 return -EBUSY; 1944 } 1945 1946 port->mapbase = res->start; 1947 ret = platform_get_irq(platdev, 0); 1948 if (ret < 0) { 1949 port->irq = 0; 1950 } else { 1951 port->irq = ret; 1952 ourport->rx_irq = ret; 1953 ourport->tx_irq = ret + 1; 1954 } 1955 1956 switch (ourport->info->type) { 1957 case TYPE_S3C24XX: 1958 ret = platform_get_irq(platdev, 1); 1959 if (ret > 0) 1960 ourport->tx_irq = ret; 1961 break; 1962 default: 1963 break; 1964 } 1965 1966 /* 1967 * DMA is currently supported only on DT platforms, if DMA properties 1968 * are specified. 1969 */ 1970 if (platdev->dev.of_node && of_find_property(platdev->dev.of_node, 1971 "dmas", NULL)) { 1972 ourport->dma = devm_kzalloc(port->dev, 1973 sizeof(*ourport->dma), 1974 GFP_KERNEL); 1975 if (!ourport->dma) { 1976 ret = -ENOMEM; 1977 goto err; 1978 } 1979 } 1980 1981 ourport->clk = clk_get(&platdev->dev, "uart"); 1982 if (IS_ERR(ourport->clk)) { 1983 pr_err("%s: Controller clock not found\n", 1984 dev_name(&platdev->dev)); 1985 ret = PTR_ERR(ourport->clk); 1986 goto err; 1987 } 1988 1989 ret = clk_prepare_enable(ourport->clk); 1990 if (ret) { 1991 pr_err("uart: clock failed to prepare+enable: %d\n", ret); 1992 clk_put(ourport->clk); 1993 goto err; 1994 } 1995 1996 ret = s3c24xx_serial_enable_baudclk(ourport); 1997 if (ret) 1998 pr_warn("uart: failed to enable baudclk\n"); 1999 2000 /* Keep all interrupts masked and cleared */ 2001 switch (ourport->info->type) { 2002 case TYPE_S3C6400: 2003 wr_regl(port, S3C64XX_UINTM, 0xf); 2004 wr_regl(port, S3C64XX_UINTP, 0xf); 2005 wr_regl(port, S3C64XX_UINTSP, 0xf); 2006 break; 2007 case TYPE_APPLE_S5L: { 2008 unsigned int ucon; 2009 2010 ucon = rd_regl(port, S3C2410_UCON); 2011 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | 2012 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 2013 APPLE_S5L_UCON_RXTO_ENA_MSK); 2014 wr_regl(port, S3C2410_UCON, ucon); 2015 2016 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); 2017 break; 2018 } 2019 default: 2020 break; 2021 } 2022 2023 dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n", 2024 &port->mapbase, port->membase, port->irq, 2025 ourport->rx_irq, ourport->tx_irq, port->uartclk); 2026 2027 /* reset the fifos (and setup the uart) */ 2028 s3c24xx_serial_resetport(port, cfg); 2029 2030 return 0; 2031 2032 err: 2033 port->mapbase = 0; 2034 return ret; 2035 } 2036 2037 /* Device driver serial port probe */ 2038 2039 static int probe_index; 2040 2041 static inline const struct s3c24xx_serial_drv_data * 2042 s3c24xx_get_driver_data(struct platform_device *pdev) 2043 { 2044 if (dev_of_node(&pdev->dev)) 2045 return of_device_get_match_data(&pdev->dev); 2046 2047 return (struct s3c24xx_serial_drv_data *) 2048 platform_get_device_id(pdev)->driver_data; 2049 } 2050 2051 static int s3c24xx_serial_probe(struct platform_device *pdev) 2052 { 2053 struct device_node *np = pdev->dev.of_node; 2054 struct s3c24xx_uart_port *ourport; 2055 int index = probe_index; 2056 int ret, prop = 0; 2057 2058 if (np) { 2059 ret = of_alias_get_id(np, "serial"); 2060 if (ret >= 0) 2061 index = ret; 2062 } 2063 2064 if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) { 2065 dev_err(&pdev->dev, "serial%d out of range\n", index); 2066 return -EINVAL; 2067 } 2068 ourport = &s3c24xx_serial_ports[index]; 2069 2070 s3c24xx_serial_init_port_default(index); 2071 2072 ourport->drv_data = s3c24xx_get_driver_data(pdev); 2073 if (!ourport->drv_data) { 2074 dev_err(&pdev->dev, "could not find driver data\n"); 2075 return -ENODEV; 2076 } 2077 2078 ourport->baudclk = ERR_PTR(-EINVAL); 2079 ourport->info = &ourport->drv_data->info; 2080 ourport->cfg = (dev_get_platdata(&pdev->dev)) ? 2081 dev_get_platdata(&pdev->dev) : 2082 &ourport->drv_data->def_cfg; 2083 2084 switch (ourport->info->type) { 2085 case TYPE_S3C24XX: 2086 ourport->port.ops = &s3c24xx_serial_ops; 2087 break; 2088 case TYPE_S3C6400: 2089 ourport->port.ops = &s3c64xx_serial_ops; 2090 break; 2091 case TYPE_APPLE_S5L: 2092 ourport->port.ops = &apple_s5l_serial_ops; 2093 break; 2094 } 2095 2096 if (np) { 2097 of_property_read_u32(np, 2098 "samsung,uart-fifosize", &ourport->port.fifosize); 2099 2100 if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { 2101 switch (prop) { 2102 case 1: 2103 ourport->port.iotype = UPIO_MEM; 2104 break; 2105 case 4: 2106 ourport->port.iotype = UPIO_MEM32; 2107 break; 2108 default: 2109 dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n", 2110 prop); 2111 return -EINVAL; 2112 } 2113 } 2114 } 2115 2116 if (ourport->drv_data->fifosize[index]) 2117 ourport->port.fifosize = ourport->drv_data->fifosize[index]; 2118 else if (ourport->info->fifosize) 2119 ourport->port.fifosize = ourport->info->fifosize; 2120 ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE); 2121 2122 /* 2123 * DMA transfers must be aligned at least to cache line size, 2124 * so find minimal transfer size suitable for DMA mode 2125 */ 2126 ourport->min_dma_size = max_t(int, ourport->port.fifosize, 2127 dma_get_cache_alignment()); 2128 2129 dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport); 2130 2131 ret = s3c24xx_serial_init_port(ourport, pdev); 2132 if (ret < 0) 2133 return ret; 2134 2135 if (!s3c24xx_uart_drv.state) { 2136 ret = uart_register_driver(&s3c24xx_uart_drv); 2137 if (ret < 0) { 2138 pr_err("Failed to register Samsung UART driver\n"); 2139 return ret; 2140 } 2141 } 2142 2143 dev_dbg(&pdev->dev, "%s: adding port\n", __func__); 2144 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); 2145 platform_set_drvdata(pdev, &ourport->port); 2146 2147 /* 2148 * Deactivate the clock enabled in s3c24xx_serial_init_port here, 2149 * so that a potential re-enablement through the pm-callback overlaps 2150 * and keeps the clock enabled in this case. 2151 */ 2152 clk_disable_unprepare(ourport->clk); 2153 if (!IS_ERR(ourport->baudclk)) 2154 clk_disable_unprepare(ourport->baudclk); 2155 2156 probe_index++; 2157 2158 return 0; 2159 } 2160 2161 static int s3c24xx_serial_remove(struct platform_device *dev) 2162 { 2163 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); 2164 2165 if (port) { 2166 uart_remove_one_port(&s3c24xx_uart_drv, port); 2167 } 2168 2169 uart_unregister_driver(&s3c24xx_uart_drv); 2170 2171 return 0; 2172 } 2173 2174 /* UART power management code */ 2175 #ifdef CONFIG_PM_SLEEP 2176 static int s3c24xx_serial_suspend(struct device *dev) 2177 { 2178 struct uart_port *port = s3c24xx_dev_to_port(dev); 2179 2180 if (port) 2181 uart_suspend_port(&s3c24xx_uart_drv, port); 2182 2183 return 0; 2184 } 2185 2186 static int s3c24xx_serial_resume(struct device *dev) 2187 { 2188 struct uart_port *port = s3c24xx_dev_to_port(dev); 2189 struct s3c24xx_uart_port *ourport = to_ourport(port); 2190 2191 if (port) { 2192 clk_prepare_enable(ourport->clk); 2193 if (!IS_ERR(ourport->baudclk)) 2194 clk_prepare_enable(ourport->baudclk); 2195 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); 2196 if (!IS_ERR(ourport->baudclk)) 2197 clk_disable_unprepare(ourport->baudclk); 2198 clk_disable_unprepare(ourport->clk); 2199 2200 uart_resume_port(&s3c24xx_uart_drv, port); 2201 } 2202 2203 return 0; 2204 } 2205 2206 static int s3c24xx_serial_resume_noirq(struct device *dev) 2207 { 2208 struct uart_port *port = s3c24xx_dev_to_port(dev); 2209 struct s3c24xx_uart_port *ourport = to_ourport(port); 2210 2211 if (port) { 2212 /* restore IRQ mask */ 2213 switch (ourport->info->type) { 2214 case TYPE_S3C6400: { 2215 unsigned int uintm = 0xf; 2216 2217 if (ourport->tx_enabled) 2218 uintm &= ~S3C64XX_UINTM_TXD_MSK; 2219 if (ourport->rx_enabled) 2220 uintm &= ~S3C64XX_UINTM_RXD_MSK; 2221 clk_prepare_enable(ourport->clk); 2222 if (!IS_ERR(ourport->baudclk)) 2223 clk_prepare_enable(ourport->baudclk); 2224 wr_regl(port, S3C64XX_UINTM, uintm); 2225 if (!IS_ERR(ourport->baudclk)) 2226 clk_disable_unprepare(ourport->baudclk); 2227 clk_disable_unprepare(ourport->clk); 2228 break; 2229 } 2230 case TYPE_APPLE_S5L: { 2231 unsigned int ucon; 2232 int ret; 2233 2234 ret = clk_prepare_enable(ourport->clk); 2235 if (ret) { 2236 dev_err(dev, "clk_enable clk failed: %d\n", ret); 2237 return ret; 2238 } 2239 if (!IS_ERR(ourport->baudclk)) { 2240 ret = clk_prepare_enable(ourport->baudclk); 2241 if (ret) { 2242 dev_err(dev, "clk_enable baudclk failed: %d\n", ret); 2243 clk_disable_unprepare(ourport->clk); 2244 return ret; 2245 } 2246 } 2247 2248 ucon = rd_regl(port, S3C2410_UCON); 2249 2250 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | 2251 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 2252 APPLE_S5L_UCON_RXTO_ENA_MSK); 2253 2254 if (ourport->tx_enabled) 2255 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK; 2256 if (ourport->rx_enabled) 2257 ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 2258 APPLE_S5L_UCON_RXTO_ENA_MSK; 2259 2260 wr_regl(port, S3C2410_UCON, ucon); 2261 2262 if (!IS_ERR(ourport->baudclk)) 2263 clk_disable_unprepare(ourport->baudclk); 2264 clk_disable_unprepare(ourport->clk); 2265 break; 2266 } 2267 default: 2268 break; 2269 } 2270 } 2271 2272 return 0; 2273 } 2274 2275 static const struct dev_pm_ops s3c24xx_serial_pm_ops = { 2276 .suspend = s3c24xx_serial_suspend, 2277 .resume = s3c24xx_serial_resume, 2278 .resume_noirq = s3c24xx_serial_resume_noirq, 2279 }; 2280 #define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) 2281 2282 #else /* !CONFIG_PM_SLEEP */ 2283 2284 #define SERIAL_SAMSUNG_PM_OPS NULL 2285 #endif /* CONFIG_PM_SLEEP */ 2286 2287 /* Console code */ 2288 2289 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE 2290 2291 static struct uart_port *cons_uart; 2292 2293 static int 2294 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) 2295 { 2296 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 2297 unsigned long ufstat, utrstat; 2298 2299 if (ufcon & S3C2410_UFCON_FIFOMODE) { 2300 /* fifo mode - check amount of data in fifo registers... */ 2301 2302 ufstat = rd_regl(port, S3C2410_UFSTAT); 2303 return (ufstat & info->tx_fifofull) ? 0 : 1; 2304 } 2305 2306 /* in non-fifo mode, we go and use the tx buffer empty */ 2307 2308 utrstat = rd_regl(port, S3C2410_UTRSTAT); 2309 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; 2310 } 2311 2312 static bool 2313 s3c24xx_port_configured(unsigned int ucon) 2314 { 2315 /* consider the serial port configured if the tx/rx mode set */ 2316 return (ucon & 0xf) != 0; 2317 } 2318 2319 #ifdef CONFIG_CONSOLE_POLL 2320 /* 2321 * Console polling routines for writing and reading from the uart while 2322 * in an interrupt or debug context. 2323 */ 2324 2325 static int s3c24xx_serial_get_poll_char(struct uart_port *port) 2326 { 2327 const struct s3c24xx_uart_port *ourport = to_ourport(port); 2328 unsigned int ufstat; 2329 2330 ufstat = rd_regl(port, S3C2410_UFSTAT); 2331 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) 2332 return NO_POLL_CHAR; 2333 2334 return rd_reg(port, S3C2410_URXH); 2335 } 2336 2337 static void s3c24xx_serial_put_poll_char(struct uart_port *port, 2338 unsigned char c) 2339 { 2340 unsigned int ufcon = rd_regl(port, S3C2410_UFCON); 2341 unsigned int ucon = rd_regl(port, S3C2410_UCON); 2342 2343 /* not possible to xmit on unconfigured port */ 2344 if (!s3c24xx_port_configured(ucon)) 2345 return; 2346 2347 while (!s3c24xx_serial_console_txrdy(port, ufcon)) 2348 cpu_relax(); 2349 wr_reg(port, S3C2410_UTXH, c); 2350 } 2351 2352 #endif /* CONFIG_CONSOLE_POLL */ 2353 2354 static void 2355 s3c24xx_serial_console_putchar(struct uart_port *port, unsigned char ch) 2356 { 2357 unsigned int ufcon = rd_regl(port, S3C2410_UFCON); 2358 2359 while (!s3c24xx_serial_console_txrdy(port, ufcon)) 2360 cpu_relax(); 2361 wr_reg(port, S3C2410_UTXH, ch); 2362 } 2363 2364 static void 2365 s3c24xx_serial_console_write(struct console *co, const char *s, 2366 unsigned int count) 2367 { 2368 unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); 2369 unsigned long flags; 2370 bool locked = true; 2371 2372 /* not possible to xmit on unconfigured port */ 2373 if (!s3c24xx_port_configured(ucon)) 2374 return; 2375 2376 if (cons_uart->sysrq) 2377 locked = false; 2378 else if (oops_in_progress) 2379 locked = spin_trylock_irqsave(&cons_uart->lock, flags); 2380 else 2381 spin_lock_irqsave(&cons_uart->lock, flags); 2382 2383 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); 2384 2385 if (locked) 2386 spin_unlock_irqrestore(&cons_uart->lock, flags); 2387 } 2388 2389 /* Shouldn't be __init, as it can be instantiated from other module */ 2390 static void 2391 s3c24xx_serial_get_options(struct uart_port *port, int *baud, 2392 int *parity, int *bits) 2393 { 2394 struct clk *clk; 2395 unsigned int ulcon; 2396 unsigned int ucon; 2397 unsigned int ubrdiv; 2398 unsigned long rate; 2399 unsigned int clk_sel; 2400 char clk_name[MAX_CLK_NAME_LENGTH]; 2401 2402 ulcon = rd_regl(port, S3C2410_ULCON); 2403 ucon = rd_regl(port, S3C2410_UCON); 2404 ubrdiv = rd_regl(port, S3C2410_UBRDIV); 2405 2406 if (s3c24xx_port_configured(ucon)) { 2407 switch (ulcon & S3C2410_LCON_CSMASK) { 2408 case S3C2410_LCON_CS5: 2409 *bits = 5; 2410 break; 2411 case S3C2410_LCON_CS6: 2412 *bits = 6; 2413 break; 2414 case S3C2410_LCON_CS7: 2415 *bits = 7; 2416 break; 2417 case S3C2410_LCON_CS8: 2418 default: 2419 *bits = 8; 2420 break; 2421 } 2422 2423 switch (ulcon & S3C2410_LCON_PMASK) { 2424 case S3C2410_LCON_PEVEN: 2425 *parity = 'e'; 2426 break; 2427 2428 case S3C2410_LCON_PODD: 2429 *parity = 'o'; 2430 break; 2431 2432 case S3C2410_LCON_PNONE: 2433 default: 2434 *parity = 'n'; 2435 } 2436 2437 /* now calculate the baud rate */ 2438 2439 clk_sel = s3c24xx_serial_getsource(port); 2440 sprintf(clk_name, "clk_uart_baud%d", clk_sel); 2441 2442 clk = clk_get(port->dev, clk_name); 2443 if (!IS_ERR(clk)) 2444 rate = clk_get_rate(clk); 2445 else 2446 rate = 1; 2447 2448 *baud = rate / (16 * (ubrdiv + 1)); 2449 dev_dbg(port->dev, "calculated baud %d\n", *baud); 2450 } 2451 } 2452 2453 /* Shouldn't be __init, as it can be instantiated from other module */ 2454 static int 2455 s3c24xx_serial_console_setup(struct console *co, char *options) 2456 { 2457 struct uart_port *port; 2458 int baud = 9600; 2459 int bits = 8; 2460 int parity = 'n'; 2461 int flow = 'n'; 2462 2463 /* is this a valid port */ 2464 2465 if (co->index == -1 || co->index >= UART_NR) 2466 co->index = 0; 2467 2468 port = &s3c24xx_serial_ports[co->index].port; 2469 2470 /* is the port configured? */ 2471 2472 if (port->mapbase == 0x0) 2473 return -ENODEV; 2474 2475 cons_uart = port; 2476 2477 /* 2478 * Check whether an invalid uart number has been specified, and 2479 * if so, search for the first available port that does have 2480 * console support. 2481 */ 2482 if (options) 2483 uart_parse_options(options, &baud, &parity, &bits, &flow); 2484 else 2485 s3c24xx_serial_get_options(port, &baud, &parity, &bits); 2486 2487 dev_dbg(port->dev, "baud %d\n", baud); 2488 2489 return uart_set_options(port, co, baud, parity, bits, flow); 2490 } 2491 2492 static struct console s3c24xx_serial_console = { 2493 .name = S3C24XX_SERIAL_NAME, 2494 .device = uart_console_device, 2495 .flags = CON_PRINTBUFFER, 2496 .index = -1, 2497 .write = s3c24xx_serial_console_write, 2498 .setup = s3c24xx_serial_console_setup, 2499 .data = &s3c24xx_uart_drv, 2500 }; 2501 #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ 2502 2503 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) 2504 static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { 2505 .info = { 2506 .name = "Samsung S3C6400 UART", 2507 .type = TYPE_S3C6400, 2508 .port_type = PORT_S3C6400, 2509 .fifosize = 64, 2510 .has_divslot = 1, 2511 .rx_fifomask = S3C2440_UFSTAT_RXMASK, 2512 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, 2513 .rx_fifofull = S3C2440_UFSTAT_RXFULL, 2514 .tx_fifofull = S3C2440_UFSTAT_TXFULL, 2515 .tx_fifomask = S3C2440_UFSTAT_TXMASK, 2516 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, 2517 .def_clk_sel = S3C2410_UCON_CLKSEL2, 2518 .num_clks = 4, 2519 .clksel_mask = S3C6400_UCON_CLKMASK, 2520 .clksel_shift = S3C6400_UCON_CLKSHIFT, 2521 }, 2522 .def_cfg = { 2523 .ucon = S3C2410_UCON_DEFAULT, 2524 .ufcon = S3C2410_UFCON_DEFAULT, 2525 }, 2526 }; 2527 #define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data) 2528 #else 2529 #define S3C6400_SERIAL_DRV_DATA NULL 2530 #endif 2531 2532 #ifdef CONFIG_CPU_S5PV210 2533 static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { 2534 .info = { 2535 .name = "Samsung S5PV210 UART", 2536 .type = TYPE_S3C6400, 2537 .port_type = PORT_S3C6400, 2538 .has_divslot = 1, 2539 .rx_fifomask = S5PV210_UFSTAT_RXMASK, 2540 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, 2541 .rx_fifofull = S5PV210_UFSTAT_RXFULL, 2542 .tx_fifofull = S5PV210_UFSTAT_TXFULL, 2543 .tx_fifomask = S5PV210_UFSTAT_TXMASK, 2544 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, 2545 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2546 .num_clks = 2, 2547 .clksel_mask = S5PV210_UCON_CLKMASK, 2548 .clksel_shift = S5PV210_UCON_CLKSHIFT, 2549 }, 2550 .def_cfg = { 2551 .ucon = S5PV210_UCON_DEFAULT, 2552 .ufcon = S5PV210_UFCON_DEFAULT, 2553 }, 2554 .fifosize = { 256, 64, 16, 16 }, 2555 }; 2556 #define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data) 2557 #else 2558 #define S5PV210_SERIAL_DRV_DATA NULL 2559 #endif 2560 2561 #if defined(CONFIG_ARCH_EXYNOS) 2562 #define EXYNOS_COMMON_SERIAL_DRV_DATA() \ 2563 .info = { \ 2564 .name = "Samsung Exynos UART", \ 2565 .type = TYPE_S3C6400, \ 2566 .port_type = PORT_S3C6400, \ 2567 .has_divslot = 1, \ 2568 .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ 2569 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ 2570 .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ 2571 .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ 2572 .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ 2573 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ 2574 .def_clk_sel = S3C2410_UCON_CLKSEL0, \ 2575 .num_clks = 1, \ 2576 .clksel_mask = 0, \ 2577 .clksel_shift = 0, \ 2578 }, \ 2579 .def_cfg = { \ 2580 .ucon = S5PV210_UCON_DEFAULT, \ 2581 .ufcon = S5PV210_UFCON_DEFAULT, \ 2582 .has_fracval = 1, \ 2583 } \ 2584 2585 static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { 2586 EXYNOS_COMMON_SERIAL_DRV_DATA(), 2587 .fifosize = { 256, 64, 16, 16 }, 2588 }; 2589 2590 static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { 2591 EXYNOS_COMMON_SERIAL_DRV_DATA(), 2592 .fifosize = { 64, 256, 16, 256 }, 2593 }; 2594 2595 static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { 2596 EXYNOS_COMMON_SERIAL_DRV_DATA(), 2597 .fifosize = { 256, 64, 64, 64 }, 2598 }; 2599 2600 #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data) 2601 #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data) 2602 #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data) 2603 2604 #else 2605 #define EXYNOS4210_SERIAL_DRV_DATA NULL 2606 #define EXYNOS5433_SERIAL_DRV_DATA NULL 2607 #define EXYNOS850_SERIAL_DRV_DATA NULL 2608 #endif 2609 2610 #ifdef CONFIG_ARCH_APPLE 2611 static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = { 2612 .info = { 2613 .name = "Apple S5L UART", 2614 .type = TYPE_APPLE_S5L, 2615 .port_type = PORT_8250, 2616 .fifosize = 16, 2617 .rx_fifomask = S3C2410_UFSTAT_RXMASK, 2618 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, 2619 .rx_fifofull = S3C2410_UFSTAT_RXFULL, 2620 .tx_fifofull = S3C2410_UFSTAT_TXFULL, 2621 .tx_fifomask = S3C2410_UFSTAT_TXMASK, 2622 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, 2623 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2624 .num_clks = 1, 2625 .clksel_mask = 0, 2626 .clksel_shift = 0, 2627 .ucon_mask = APPLE_S5L_UCON_MASK, 2628 }, 2629 .def_cfg = { 2630 .ucon = APPLE_S5L_UCON_DEFAULT, 2631 .ufcon = S3C2410_UFCON_DEFAULT, 2632 }, 2633 }; 2634 #define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data) 2635 #else 2636 #define S5L_SERIAL_DRV_DATA NULL 2637 #endif 2638 2639 #if defined(CONFIG_ARCH_ARTPEC) 2640 static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = { 2641 .info = { 2642 .name = "Axis ARTPEC-8 UART", 2643 .type = TYPE_S3C6400, 2644 .port_type = PORT_S3C6400, 2645 .fifosize = 64, 2646 .has_divslot = 1, 2647 .rx_fifomask = S5PV210_UFSTAT_RXMASK, 2648 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, 2649 .rx_fifofull = S5PV210_UFSTAT_RXFULL, 2650 .tx_fifofull = S5PV210_UFSTAT_TXFULL, 2651 .tx_fifomask = S5PV210_UFSTAT_TXMASK, 2652 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, 2653 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2654 .num_clks = 1, 2655 .clksel_mask = 0, 2656 .clksel_shift = 0, 2657 }, 2658 .def_cfg = { 2659 .ucon = S5PV210_UCON_DEFAULT, 2660 .ufcon = S5PV210_UFCON_DEFAULT, 2661 .has_fracval = 1, 2662 } 2663 }; 2664 #define ARTPEC8_SERIAL_DRV_DATA (&artpec8_serial_drv_data) 2665 #else 2666 #define ARTPEC8_SERIAL_DRV_DATA (NULL) 2667 #endif 2668 2669 static const struct platform_device_id s3c24xx_serial_driver_ids[] = { 2670 { 2671 .name = "s3c6400-uart", 2672 .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA, 2673 }, { 2674 .name = "s5pv210-uart", 2675 .driver_data = (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA, 2676 }, { 2677 .name = "exynos4210-uart", 2678 .driver_data = (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA, 2679 }, { 2680 .name = "exynos5433-uart", 2681 .driver_data = (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA, 2682 }, { 2683 .name = "s5l-uart", 2684 .driver_data = (kernel_ulong_t)S5L_SERIAL_DRV_DATA, 2685 }, { 2686 .name = "exynos850-uart", 2687 .driver_data = (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA, 2688 }, { 2689 .name = "artpec8-uart", 2690 .driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA, 2691 }, 2692 { }, 2693 }; 2694 MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); 2695 2696 #ifdef CONFIG_OF 2697 static const struct of_device_id s3c24xx_uart_dt_match[] = { 2698 { .compatible = "samsung,s3c6400-uart", 2699 .data = S3C6400_SERIAL_DRV_DATA }, 2700 { .compatible = "samsung,s5pv210-uart", 2701 .data = S5PV210_SERIAL_DRV_DATA }, 2702 { .compatible = "samsung,exynos4210-uart", 2703 .data = EXYNOS4210_SERIAL_DRV_DATA }, 2704 { .compatible = "samsung,exynos5433-uart", 2705 .data = EXYNOS5433_SERIAL_DRV_DATA }, 2706 { .compatible = "apple,s5l-uart", 2707 .data = S5L_SERIAL_DRV_DATA }, 2708 { .compatible = "samsung,exynos850-uart", 2709 .data = EXYNOS850_SERIAL_DRV_DATA }, 2710 { .compatible = "axis,artpec8-uart", 2711 .data = ARTPEC8_SERIAL_DRV_DATA }, 2712 {}, 2713 }; 2714 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); 2715 #endif 2716 2717 static struct platform_driver samsung_serial_driver = { 2718 .probe = s3c24xx_serial_probe, 2719 .remove = s3c24xx_serial_remove, 2720 .id_table = s3c24xx_serial_driver_ids, 2721 .driver = { 2722 .name = "samsung-uart", 2723 .pm = SERIAL_SAMSUNG_PM_OPS, 2724 .of_match_table = of_match_ptr(s3c24xx_uart_dt_match), 2725 }, 2726 }; 2727 2728 static int __init samsung_serial_init(void) 2729 { 2730 int ret; 2731 2732 s3c24xx_serial_register_console(); 2733 2734 ret = platform_driver_register(&samsung_serial_driver); 2735 if (ret) { 2736 s3c24xx_serial_unregister_console(); 2737 return ret; 2738 } 2739 2740 return 0; 2741 } 2742 2743 static void __exit samsung_serial_exit(void) 2744 { 2745 platform_driver_unregister(&samsung_serial_driver); 2746 s3c24xx_serial_unregister_console(); 2747 } 2748 2749 module_init(samsung_serial_init); 2750 module_exit(samsung_serial_exit); 2751 2752 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE 2753 /* 2754 * Early console. 2755 */ 2756 2757 static void wr_reg_barrier(const struct uart_port *port, u32 reg, u32 val) 2758 { 2759 switch (port->iotype) { 2760 case UPIO_MEM: 2761 writeb(val, portaddr(port, reg)); 2762 break; 2763 case UPIO_MEM32: 2764 writel(val, portaddr(port, reg)); 2765 break; 2766 } 2767 } 2768 2769 struct samsung_early_console_data { 2770 u32 txfull_mask; 2771 u32 rxfifo_mask; 2772 }; 2773 2774 static void samsung_early_busyuart(const struct uart_port *port) 2775 { 2776 while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) 2777 ; 2778 } 2779 2780 static void samsung_early_busyuart_fifo(const struct uart_port *port) 2781 { 2782 const struct samsung_early_console_data *data = port->private_data; 2783 2784 while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) 2785 ; 2786 } 2787 2788 static void samsung_early_putc(struct uart_port *port, unsigned char c) 2789 { 2790 if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) 2791 samsung_early_busyuart_fifo(port); 2792 else 2793 samsung_early_busyuart(port); 2794 2795 wr_reg_barrier(port, S3C2410_UTXH, c); 2796 } 2797 2798 static void samsung_early_write(struct console *con, const char *s, 2799 unsigned int n) 2800 { 2801 struct earlycon_device *dev = con->data; 2802 2803 uart_console_write(&dev->port, s, n, samsung_early_putc); 2804 } 2805 2806 static int samsung_early_read(struct console *con, char *s, unsigned int n) 2807 { 2808 struct earlycon_device *dev = con->data; 2809 const struct samsung_early_console_data *data = dev->port.private_data; 2810 int ch, ufstat, num_read = 0; 2811 2812 while (num_read < n) { 2813 ufstat = rd_regl(&dev->port, S3C2410_UFSTAT); 2814 if (!(ufstat & data->rxfifo_mask)) 2815 break; 2816 ch = rd_reg(&dev->port, S3C2410_URXH); 2817 if (ch == NO_POLL_CHAR) 2818 break; 2819 2820 s[num_read++] = ch; 2821 } 2822 2823 return num_read; 2824 } 2825 2826 static int __init samsung_early_console_setup(struct earlycon_device *device, 2827 const char *opt) 2828 { 2829 if (!device->port.membase) 2830 return -ENODEV; 2831 2832 device->con->write = samsung_early_write; 2833 device->con->read = samsung_early_read; 2834 return 0; 2835 } 2836 2837 /* S3C2410 */ 2838 static struct samsung_early_console_data s3c2410_early_console_data = { 2839 .txfull_mask = S3C2410_UFSTAT_TXFULL, 2840 .rxfifo_mask = S3C2410_UFSTAT_RXFULL | S3C2410_UFSTAT_RXMASK, 2841 }; 2842 2843 static int __init s3c2410_early_console_setup(struct earlycon_device *device, 2844 const char *opt) 2845 { 2846 device->port.private_data = &s3c2410_early_console_data; 2847 return samsung_early_console_setup(device, opt); 2848 } 2849 2850 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", 2851 s3c2410_early_console_setup); 2852 2853 /* S3C2412, S3C2440, S3C64xx */ 2854 static struct samsung_early_console_data s3c2440_early_console_data = { 2855 .txfull_mask = S3C2440_UFSTAT_TXFULL, 2856 .rxfifo_mask = S3C2440_UFSTAT_RXFULL | S3C2440_UFSTAT_RXMASK, 2857 }; 2858 2859 static int __init s3c2440_early_console_setup(struct earlycon_device *device, 2860 const char *opt) 2861 { 2862 device->port.private_data = &s3c2440_early_console_data; 2863 return samsung_early_console_setup(device, opt); 2864 } 2865 2866 OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart", 2867 s3c2440_early_console_setup); 2868 OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart", 2869 s3c2440_early_console_setup); 2870 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", 2871 s3c2440_early_console_setup); 2872 2873 /* S5PV210, Exynos */ 2874 static struct samsung_early_console_data s5pv210_early_console_data = { 2875 .txfull_mask = S5PV210_UFSTAT_TXFULL, 2876 .rxfifo_mask = S5PV210_UFSTAT_RXFULL | S5PV210_UFSTAT_RXMASK, 2877 }; 2878 2879 static int __init s5pv210_early_console_setup(struct earlycon_device *device, 2880 const char *opt) 2881 { 2882 device->port.private_data = &s5pv210_early_console_data; 2883 return samsung_early_console_setup(device, opt); 2884 } 2885 2886 OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", 2887 s5pv210_early_console_setup); 2888 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", 2889 s5pv210_early_console_setup); 2890 OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart", 2891 s5pv210_early_console_setup); 2892 2893 /* Apple S5L */ 2894 static int __init apple_s5l_early_console_setup(struct earlycon_device *device, 2895 const char *opt) 2896 { 2897 /* Close enough to S3C2410 for earlycon... */ 2898 device->port.private_data = &s3c2410_early_console_data; 2899 2900 #ifdef CONFIG_ARM64 2901 /* ... but we need to override the existing fixmap entry as nGnRnE */ 2902 __set_fixmap(FIX_EARLYCON_MEM_BASE, device->port.mapbase, 2903 __pgprot(PROT_DEVICE_nGnRnE)); 2904 #endif 2905 return samsung_early_console_setup(device, opt); 2906 } 2907 2908 OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup); 2909 #endif 2910 2911 MODULE_ALIAS("platform:samsung-uart"); 2912 MODULE_DESCRIPTION("Samsung SoC Serial port driver"); 2913 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); 2914 MODULE_LICENSE("GPL v2"); 2915