1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for Comtrol RocketPort EXPRESS/INFINITY cards 4 * 5 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com> 6 * 7 * Inspired by, and loosely based on: 8 * 9 * ar933x_uart.c 10 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> 11 * 12 * rocketport_infinity_express-linux-1.20.tar.gz 13 * Copyright (C) 2004-2011 Comtrol, Inc. 14 */ 15 16 #include <linux/bitops.h> 17 #include <linux/compiler.h> 18 #include <linux/completion.h> 19 #include <linux/console.h> 20 #include <linux/delay.h> 21 #include <linux/firmware.h> 22 #include <linux/init.h> 23 #include <linux/io.h> 24 #include <linux/ioport.h> 25 #include <linux/irq.h> 26 #include <linux/kernel.h> 27 #include <linux/log2.h> 28 #include <linux/module.h> 29 #include <linux/pci.h> 30 #include <linux/serial.h> 31 #include <linux/serial_core.h> 32 #include <linux/slab.h> 33 #include <linux/sysrq.h> 34 #include <linux/tty.h> 35 #include <linux/tty_flip.h> 36 #include <linux/types.h> 37 38 #define DRV_NAME "rp2" 39 40 #define RP2_FW_NAME "rp2.fw" 41 #define RP2_UCODE_BYTES 0x3f 42 43 #define PORTS_PER_ASIC 16 44 #define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1) 45 46 #define UART_CLOCK 44236800 47 #define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16)) 48 #define FIFO_SIZE 512 49 50 /* BAR0 registers */ 51 #define RP2_FPGA_CTL0 0x110 52 #define RP2_FPGA_CTL1 0x11c 53 #define RP2_IRQ_MASK 0x1ec 54 #define RP2_IRQ_MASK_EN_m BIT(0) 55 #define RP2_IRQ_STATUS 0x1f0 56 57 /* BAR1 registers */ 58 #define RP2_ASIC_SPACING 0x1000 59 #define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING)) 60 61 #define RP2_PORT_BASE 0x000 62 #define RP2_PORT_SPACING 0x040 63 64 #define RP2_UCODE_BASE 0x400 65 #define RP2_UCODE_SPACING 0x80 66 67 #define RP2_CLK_PRESCALER 0xc00 68 #define RP2_CH_IRQ_STAT 0xc04 69 #define RP2_CH_IRQ_MASK 0xc08 70 #define RP2_ASIC_IRQ 0xd00 71 #define RP2_ASIC_IRQ_EN_m BIT(20) 72 #define RP2_GLOBAL_CMD 0xd0c 73 #define RP2_ASIC_CFG 0xd04 74 75 /* port registers */ 76 #define RP2_DATA_DWORD 0x000 77 78 #define RP2_DATA_BYTE 0x008 79 #define RP2_DATA_BYTE_ERR_PARITY_m BIT(8) 80 #define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9) 81 #define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10) 82 #define RP2_DATA_BYTE_BREAK_m BIT(11) 83 84 /* This lets uart_insert_char() drop bytes received on a !CREAD port */ 85 #define RP2_DUMMY_READ BIT(16) 86 87 #define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \ 88 RP2_DATA_BYTE_ERR_OVERRUN_m | \ 89 RP2_DATA_BYTE_ERR_FRAMING_m | \ 90 RP2_DATA_BYTE_BREAK_m) 91 92 #define RP2_RX_FIFO_COUNT 0x00c 93 #define RP2_TX_FIFO_COUNT 0x00e 94 95 #define RP2_CHAN_STAT 0x010 96 #define RP2_CHAN_STAT_RXDATA_m BIT(0) 97 #define RP2_CHAN_STAT_DCD_m BIT(3) 98 #define RP2_CHAN_STAT_DSR_m BIT(4) 99 #define RP2_CHAN_STAT_CTS_m BIT(5) 100 #define RP2_CHAN_STAT_RI_m BIT(6) 101 #define RP2_CHAN_STAT_OVERRUN_m BIT(13) 102 #define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16) 103 #define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17) 104 #define RP2_CHAN_STAT_CD_CHANGED_m BIT(18) 105 #define RP2_CHAN_STAT_RI_CHANGED_m BIT(22) 106 #define RP2_CHAN_STAT_TXEMPTY_m BIT(25) 107 108 #define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \ 109 RP2_CHAN_STAT_CTS_CHANGED_m | \ 110 RP2_CHAN_STAT_CD_CHANGED_m | \ 111 RP2_CHAN_STAT_RI_CHANGED_m) 112 113 #define RP2_TXRX_CTL 0x014 114 #define RP2_TXRX_CTL_MSRIRQ_m BIT(0) 115 #define RP2_TXRX_CTL_RXIRQ_m BIT(2) 116 #define RP2_TXRX_CTL_RX_TRIG_s 3 117 #define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s) 118 #define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s) 119 #define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s) 120 #define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s) 121 #define RP2_TXRX_CTL_RX_EN_m BIT(5) 122 #define RP2_TXRX_CTL_RTSFLOW_m BIT(6) 123 #define RP2_TXRX_CTL_DTRFLOW_m BIT(7) 124 #define RP2_TXRX_CTL_TX_TRIG_s 16 125 #define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s) 126 #define RP2_TXRX_CTL_DSRFLOW_m BIT(18) 127 #define RP2_TXRX_CTL_TXIRQ_m BIT(19) 128 #define RP2_TXRX_CTL_CTSFLOW_m BIT(23) 129 #define RP2_TXRX_CTL_TX_EN_m BIT(24) 130 #define RP2_TXRX_CTL_RTS_m BIT(25) 131 #define RP2_TXRX_CTL_DTR_m BIT(26) 132 #define RP2_TXRX_CTL_LOOP_m BIT(27) 133 #define RP2_TXRX_CTL_BREAK_m BIT(28) 134 #define RP2_TXRX_CTL_CMSPAR_m BIT(29) 135 #define RP2_TXRX_CTL_nPARODD_m BIT(30) 136 #define RP2_TXRX_CTL_PARENB_m BIT(31) 137 138 #define RP2_UART_CTL 0x018 139 #define RP2_UART_CTL_MODE_s 0 140 #define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s) 141 #define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s) 142 #define RP2_UART_CTL_FLUSH_RX_m BIT(3) 143 #define RP2_UART_CTL_FLUSH_TX_m BIT(4) 144 #define RP2_UART_CTL_RESET_CH_m BIT(5) 145 #define RP2_UART_CTL_XMIT_EN_m BIT(6) 146 #define RP2_UART_CTL_DATABITS_s 8 147 #define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s) 148 #define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s) 149 #define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s) 150 #define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s) 151 #define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s) 152 #define RP2_UART_CTL_STOPBITS_m BIT(10) 153 154 #define RP2_BAUD 0x01c 155 156 /* ucode registers */ 157 #define RP2_TX_SWFLOW 0x02 158 #define RP2_TX_SWFLOW_ena 0x81 159 #define RP2_TX_SWFLOW_dis 0x9d 160 161 #define RP2_RX_SWFLOW 0x0c 162 #define RP2_RX_SWFLOW_ena 0x81 163 #define RP2_RX_SWFLOW_dis 0x8d 164 165 #define RP2_RX_FIFO 0x37 166 #define RP2_RX_FIFO_ena 0x08 167 #define RP2_RX_FIFO_dis 0x81 168 169 static struct uart_driver rp2_uart_driver = { 170 .owner = THIS_MODULE, 171 .driver_name = DRV_NAME, 172 .dev_name = "ttyRP", 173 .nr = CONFIG_SERIAL_RP2_NR_UARTS, 174 }; 175 176 struct rp2_card; 177 178 struct rp2_uart_port { 179 struct uart_port port; 180 int idx; 181 int ignore_rx; 182 struct rp2_card *card; 183 void __iomem *asic_base; 184 void __iomem *base; 185 void __iomem *ucode; 186 }; 187 188 struct rp2_card { 189 struct pci_dev *pdev; 190 struct rp2_uart_port *ports; 191 int n_ports; 192 int initialized_ports; 193 int minor_start; 194 int smpte; 195 void __iomem *bar0; 196 void __iomem *bar1; 197 spinlock_t card_lock; 198 }; 199 200 #define RP_ID(prod) PCI_VDEVICE(RP, (prod)) 201 #define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0)) 202 203 static inline void rp2_decode_cap(const struct pci_device_id *id, 204 int *ports, int *smpte) 205 { 206 *ports = id->driver_data >> 8; 207 *smpte = id->driver_data & 0xff; 208 } 209 210 static DEFINE_SPINLOCK(rp2_minor_lock); 211 static int rp2_minor_next; 212 213 static int rp2_alloc_ports(int n_ports) 214 { 215 int ret = -ENOSPC; 216 217 spin_lock(&rp2_minor_lock); 218 if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) { 219 /* sorry, no support for hot unplugging individual cards */ 220 ret = rp2_minor_next; 221 rp2_minor_next += n_ports; 222 } 223 spin_unlock(&rp2_minor_lock); 224 225 return ret; 226 } 227 228 static inline struct rp2_uart_port *port_to_up(struct uart_port *port) 229 { 230 return container_of(port, struct rp2_uart_port, port); 231 } 232 233 static void rp2_rmw(struct rp2_uart_port *up, int reg, 234 u32 clr_bits, u32 set_bits) 235 { 236 u32 tmp = readl(up->base + reg); 237 tmp &= ~clr_bits; 238 tmp |= set_bits; 239 writel(tmp, up->base + reg); 240 } 241 242 static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val) 243 { 244 rp2_rmw(up, reg, val, 0); 245 } 246 247 static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val) 248 { 249 rp2_rmw(up, reg, 0, val); 250 } 251 252 static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num, 253 int is_enabled) 254 { 255 unsigned long flags, irq_mask; 256 257 spin_lock_irqsave(&up->card->card_lock, flags); 258 259 irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK); 260 if (is_enabled) 261 irq_mask &= ~BIT(ch_num); 262 else 263 irq_mask |= BIT(ch_num); 264 writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK); 265 266 spin_unlock_irqrestore(&up->card->card_lock, flags); 267 } 268 269 static unsigned int rp2_uart_tx_empty(struct uart_port *port) 270 { 271 struct rp2_uart_port *up = port_to_up(port); 272 unsigned long tx_fifo_bytes, flags; 273 274 /* 275 * This should probably check the transmitter, not the FIFO. 276 * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is 277 * enabled. 278 */ 279 spin_lock_irqsave(&up->port.lock, flags); 280 tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT); 281 spin_unlock_irqrestore(&up->port.lock, flags); 282 283 return tx_fifo_bytes ? 0 : TIOCSER_TEMT; 284 } 285 286 static unsigned int rp2_uart_get_mctrl(struct uart_port *port) 287 { 288 struct rp2_uart_port *up = port_to_up(port); 289 u32 status; 290 291 status = readl(up->base + RP2_CHAN_STAT); 292 return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) | 293 ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) | 294 ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) | 295 ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0); 296 } 297 298 static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) 299 { 300 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, 301 RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m, 302 ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) | 303 ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) | 304 ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0)); 305 } 306 307 static void rp2_uart_start_tx(struct uart_port *port) 308 { 309 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m); 310 } 311 312 static void rp2_uart_stop_tx(struct uart_port *port) 313 { 314 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m); 315 } 316 317 static void rp2_uart_stop_rx(struct uart_port *port) 318 { 319 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m); 320 } 321 322 static void rp2_uart_break_ctl(struct uart_port *port, int break_state) 323 { 324 unsigned long flags; 325 326 spin_lock_irqsave(&port->lock, flags); 327 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m, 328 break_state ? RP2_TXRX_CTL_BREAK_m : 0); 329 spin_unlock_irqrestore(&port->lock, flags); 330 } 331 332 static void rp2_uart_enable_ms(struct uart_port *port) 333 { 334 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m); 335 } 336 337 static void __rp2_uart_set_termios(struct rp2_uart_port *up, 338 unsigned long cfl, 339 unsigned long ifl, 340 unsigned int baud_div) 341 { 342 /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */ 343 writew(baud_div - 1, up->base + RP2_BAUD); 344 345 /* data bits and stop bits */ 346 rp2_rmw(up, RP2_UART_CTL, 347 RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m, 348 ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) | 349 (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) | 350 (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) | 351 (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) | 352 (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0)); 353 354 /* parity and hardware flow control */ 355 rp2_rmw(up, RP2_TXRX_CTL, 356 RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m | 357 RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m | 358 RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m | 359 RP2_TXRX_CTL_CTSFLOW_m, 360 ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) | 361 ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) | 362 ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) | 363 ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m | 364 RP2_TXRX_CTL_CTSFLOW_m) : 0)); 365 366 /* XON/XOFF software flow control */ 367 writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis, 368 up->ucode + RP2_TX_SWFLOW); 369 writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis, 370 up->ucode + RP2_RX_SWFLOW); 371 } 372 373 static void rp2_uart_set_termios(struct uart_port *port, struct ktermios *new, 374 const struct ktermios *old) 375 { 376 struct rp2_uart_port *up = port_to_up(port); 377 unsigned long flags; 378 unsigned int baud, baud_div; 379 380 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); 381 baud_div = uart_get_divisor(port, baud); 382 383 if (tty_termios_baud_rate(new)) 384 tty_termios_encode_baud_rate(new, baud, baud); 385 386 spin_lock_irqsave(&port->lock, flags); 387 388 /* ignore all characters if CREAD is not set */ 389 port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ; 390 391 __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div); 392 uart_update_timeout(port, new->c_cflag, baud); 393 394 spin_unlock_irqrestore(&port->lock, flags); 395 } 396 397 static void rp2_rx_chars(struct rp2_uart_port *up) 398 { 399 u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT); 400 struct tty_port *port = &up->port.state->port; 401 402 for (; bytes != 0; bytes--) { 403 u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ; 404 u8 ch = byte & 0xff; 405 406 if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) { 407 if (!uart_handle_sysrq_char(&up->port, ch)) 408 uart_insert_char(&up->port, byte, 0, ch, 409 TTY_NORMAL); 410 } else { 411 u8 flag = TTY_NORMAL; 412 413 if (byte & RP2_DATA_BYTE_BREAK_m) 414 flag = TTY_BREAK; 415 else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m) 416 flag = TTY_FRAME; 417 else if (byte & RP2_DATA_BYTE_ERR_PARITY_m) 418 flag = TTY_PARITY; 419 uart_insert_char(&up->port, byte, 420 RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag); 421 } 422 up->port.icount.rx++; 423 } 424 425 tty_flip_buffer_push(port); 426 } 427 428 static void rp2_tx_chars(struct rp2_uart_port *up) 429 { 430 u8 ch; 431 432 uart_port_tx_limited(&up->port, ch, 433 FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT), 434 true, 435 writeb(ch, up->base + RP2_DATA_BYTE), 436 ({})); 437 } 438 439 static void rp2_ch_interrupt(struct rp2_uart_port *up) 440 { 441 u32 status; 442 443 spin_lock(&up->port.lock); 444 445 /* 446 * The IRQ status bits are clear-on-write. Other status bits in 447 * this register aren't, so it's harmless to write to them. 448 */ 449 status = readl(up->base + RP2_CHAN_STAT); 450 writel(status, up->base + RP2_CHAN_STAT); 451 452 if (status & RP2_CHAN_STAT_RXDATA_m) 453 rp2_rx_chars(up); 454 if (status & RP2_CHAN_STAT_TXEMPTY_m) 455 rp2_tx_chars(up); 456 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK) 457 wake_up_interruptible(&up->port.state->port.delta_msr_wait); 458 459 spin_unlock(&up->port.lock); 460 } 461 462 static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id) 463 { 464 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id); 465 int ch, handled = 0; 466 unsigned long status = readl(base + RP2_CH_IRQ_STAT) & 467 ~readl(base + RP2_CH_IRQ_MASK); 468 469 for_each_set_bit(ch, &status, PORTS_PER_ASIC) { 470 rp2_ch_interrupt(&card->ports[ch]); 471 handled++; 472 } 473 return handled; 474 } 475 476 static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id) 477 { 478 struct rp2_card *card = dev_id; 479 int handled; 480 481 handled = rp2_asic_interrupt(card, 0); 482 if (card->n_ports >= PORTS_PER_ASIC) 483 handled += rp2_asic_interrupt(card, 1); 484 485 return handled ? IRQ_HANDLED : IRQ_NONE; 486 } 487 488 static inline void rp2_flush_fifos(struct rp2_uart_port *up) 489 { 490 rp2_rmw_set(up, RP2_UART_CTL, 491 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m); 492 readl(up->base + RP2_UART_CTL); 493 udelay(10); 494 rp2_rmw_clr(up, RP2_UART_CTL, 495 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m); 496 } 497 498 static int rp2_uart_startup(struct uart_port *port) 499 { 500 struct rp2_uart_port *up = port_to_up(port); 501 502 rp2_flush_fifos(up); 503 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m); 504 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m, 505 RP2_TXRX_CTL_RX_TRIG_1); 506 rp2_rmw(up, RP2_CHAN_STAT, 0, 0); 507 rp2_mask_ch_irq(up, up->idx, 1); 508 509 return 0; 510 } 511 512 static void rp2_uart_shutdown(struct uart_port *port) 513 { 514 struct rp2_uart_port *up = port_to_up(port); 515 unsigned long flags; 516 517 rp2_uart_break_ctl(port, 0); 518 519 spin_lock_irqsave(&port->lock, flags); 520 rp2_mask_ch_irq(up, up->idx, 0); 521 rp2_rmw(up, RP2_CHAN_STAT, 0, 0); 522 spin_unlock_irqrestore(&port->lock, flags); 523 } 524 525 static const char *rp2_uart_type(struct uart_port *port) 526 { 527 return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL; 528 } 529 530 static void rp2_uart_release_port(struct uart_port *port) 531 { 532 /* Nothing to release ... */ 533 } 534 535 static int rp2_uart_request_port(struct uart_port *port) 536 { 537 /* UARTs always present */ 538 return 0; 539 } 540 541 static void rp2_uart_config_port(struct uart_port *port, int flags) 542 { 543 if (flags & UART_CONFIG_TYPE) 544 port->type = PORT_RP2; 545 } 546 547 static int rp2_uart_verify_port(struct uart_port *port, 548 struct serial_struct *ser) 549 { 550 if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2) 551 return -EINVAL; 552 553 return 0; 554 } 555 556 static const struct uart_ops rp2_uart_ops = { 557 .tx_empty = rp2_uart_tx_empty, 558 .set_mctrl = rp2_uart_set_mctrl, 559 .get_mctrl = rp2_uart_get_mctrl, 560 .stop_tx = rp2_uart_stop_tx, 561 .start_tx = rp2_uart_start_tx, 562 .stop_rx = rp2_uart_stop_rx, 563 .enable_ms = rp2_uart_enable_ms, 564 .break_ctl = rp2_uart_break_ctl, 565 .startup = rp2_uart_startup, 566 .shutdown = rp2_uart_shutdown, 567 .set_termios = rp2_uart_set_termios, 568 .type = rp2_uart_type, 569 .release_port = rp2_uart_release_port, 570 .request_port = rp2_uart_request_port, 571 .config_port = rp2_uart_config_port, 572 .verify_port = rp2_uart_verify_port, 573 }; 574 575 static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id) 576 { 577 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id); 578 u32 clk_cfg; 579 580 writew(1, base + RP2_GLOBAL_CMD); 581 msleep(100); 582 readw(base + RP2_GLOBAL_CMD); 583 writel(0, base + RP2_CLK_PRESCALER); 584 585 /* TDM clock configuration */ 586 clk_cfg = readw(base + RP2_ASIC_CFG); 587 clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9); 588 writew(clk_cfg, base + RP2_ASIC_CFG); 589 590 /* IRQ routing */ 591 writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK); 592 writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ); 593 } 594 595 static void rp2_init_card(struct rp2_card *card) 596 { 597 writel(4, card->bar0 + RP2_FPGA_CTL0); 598 writel(0, card->bar0 + RP2_FPGA_CTL1); 599 600 rp2_reset_asic(card, 0); 601 if (card->n_ports >= PORTS_PER_ASIC) 602 rp2_reset_asic(card, 1); 603 604 writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK); 605 } 606 607 static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw) 608 { 609 int i; 610 611 writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL); 612 readl(up->base + RP2_UART_CTL); 613 udelay(1); 614 615 writel(0, up->base + RP2_TXRX_CTL); 616 writel(0, up->base + RP2_UART_CTL); 617 readl(up->base + RP2_UART_CTL); 618 udelay(1); 619 620 rp2_flush_fifos(up); 621 622 for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++) 623 writeb(fw->data[i], up->ucode + i); 624 625 __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV); 626 rp2_uart_set_mctrl(&up->port, 0); 627 628 writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO); 629 rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m, 630 RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232); 631 rp2_rmw_set(up, RP2_TXRX_CTL, 632 RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m); 633 } 634 635 static void rp2_remove_ports(struct rp2_card *card) 636 { 637 int i; 638 639 for (i = 0; i < card->initialized_ports; i++) 640 uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port); 641 card->initialized_ports = 0; 642 } 643 644 static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw) 645 { 646 resource_size_t phys_base; 647 int i, rc = 0; 648 649 phys_base = pci_resource_start(card->pdev, 1); 650 651 for (i = 0; i < card->n_ports; i++) { 652 struct rp2_uart_port *rp = &card->ports[i]; 653 struct uart_port *p; 654 int j = (unsigned)i % PORTS_PER_ASIC; 655 656 rp->asic_base = card->bar1; 657 rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING; 658 rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING; 659 rp->card = card; 660 rp->idx = j; 661 662 p = &rp->port; 663 p->line = card->minor_start + i; 664 p->dev = &card->pdev->dev; 665 p->type = PORT_RP2; 666 p->iotype = UPIO_MEM32; 667 p->uartclk = UART_CLOCK; 668 p->regshift = 2; 669 p->fifosize = FIFO_SIZE; 670 p->ops = &rp2_uart_ops; 671 p->irq = card->pdev->irq; 672 p->membase = rp->base; 673 p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING; 674 675 if (i >= PORTS_PER_ASIC) { 676 rp->asic_base += RP2_ASIC_SPACING; 677 rp->base += RP2_ASIC_SPACING; 678 rp->ucode += RP2_ASIC_SPACING; 679 p->mapbase += RP2_ASIC_SPACING; 680 } 681 682 rp2_init_port(rp, fw); 683 rc = uart_add_one_port(&rp2_uart_driver, p); 684 if (rc) { 685 dev_err(&card->pdev->dev, 686 "error registering port %d: %d\n", i, rc); 687 rp2_remove_ports(card); 688 break; 689 } 690 card->initialized_ports++; 691 } 692 693 return rc; 694 } 695 696 static int rp2_probe(struct pci_dev *pdev, 697 const struct pci_device_id *id) 698 { 699 const struct firmware *fw; 700 struct rp2_card *card; 701 struct rp2_uart_port *ports; 702 void __iomem * const *bars; 703 int rc; 704 705 card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL); 706 if (!card) 707 return -ENOMEM; 708 pci_set_drvdata(pdev, card); 709 spin_lock_init(&card->card_lock); 710 711 rc = pcim_enable_device(pdev); 712 if (rc) 713 return rc; 714 715 rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME); 716 if (rc) 717 return rc; 718 719 bars = pcim_iomap_table(pdev); 720 card->bar0 = bars[0]; 721 card->bar1 = bars[1]; 722 card->pdev = pdev; 723 724 rp2_decode_cap(id, &card->n_ports, &card->smpte); 725 dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports); 726 727 card->minor_start = rp2_alloc_ports(card->n_ports); 728 if (card->minor_start < 0) { 729 dev_err(&pdev->dev, 730 "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n"); 731 return -EINVAL; 732 } 733 734 rp2_init_card(card); 735 736 ports = devm_kcalloc(&pdev->dev, card->n_ports, sizeof(*ports), 737 GFP_KERNEL); 738 if (!ports) 739 return -ENOMEM; 740 card->ports = ports; 741 742 rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev); 743 if (rc < 0) { 744 dev_err(&pdev->dev, "cannot find '%s' firmware image\n", 745 RP2_FW_NAME); 746 return rc; 747 } 748 749 rc = rp2_load_firmware(card, fw); 750 751 release_firmware(fw); 752 if (rc < 0) 753 return rc; 754 755 rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt, 756 IRQF_SHARED, DRV_NAME, card); 757 if (rc) 758 return rc; 759 760 return 0; 761 } 762 763 static void rp2_remove(struct pci_dev *pdev) 764 { 765 struct rp2_card *card = pci_get_drvdata(pdev); 766 767 rp2_remove_ports(card); 768 } 769 770 static const struct pci_device_id rp2_pci_tbl[] = { 771 772 /* RocketPort INFINITY cards */ 773 774 { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */ 775 { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */ 776 { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */ 777 { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */ 778 { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */ 779 { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */ 780 { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */ 781 { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */ 782 { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */ 783 { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */ 784 { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */ 785 { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */ 786 { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */ 787 { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */ 788 { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */ 789 { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */ 790 { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */ 791 792 /* RocketPort EXPRESS cards */ 793 794 { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */ 795 { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */ 796 { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */ 797 { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */ 798 { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */ 799 { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */ 800 { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */ 801 { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */ 802 { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */ 803 { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */ 804 { } 805 }; 806 MODULE_DEVICE_TABLE(pci, rp2_pci_tbl); 807 808 static struct pci_driver rp2_pci_driver = { 809 .name = DRV_NAME, 810 .id_table = rp2_pci_tbl, 811 .probe = rp2_probe, 812 .remove = rp2_remove, 813 }; 814 815 static int __init rp2_uart_init(void) 816 { 817 int rc; 818 819 rc = uart_register_driver(&rp2_uart_driver); 820 if (rc) 821 return rc; 822 823 rc = pci_register_driver(&rp2_pci_driver); 824 if (rc) { 825 uart_unregister_driver(&rp2_uart_driver); 826 return rc; 827 } 828 829 return 0; 830 } 831 832 static void __exit rp2_uart_exit(void) 833 { 834 pci_unregister_driver(&rp2_pci_driver); 835 uart_unregister_driver(&rp2_uart_driver); 836 } 837 838 module_init(rp2_uart_init); 839 module_exit(rp2_uart_exit); 840 841 MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver"); 842 MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>"); 843 MODULE_LICENSE("GPL v2"); 844 MODULE_FIRMWARE(RP2_FW_NAME); 845