1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * PIC32 Integrated Serial Driver. 4 * 5 * Copyright (C) 2015 Microchip Technology, Inc. 6 * 7 * Authors: 8 * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/platform_device.h> 13 #include <linux/of.h> 14 #include <linux/of_device.h> 15 #include <linux/of_irq.h> 16 #include <linux/of_gpio.h> 17 #include <linux/init.h> 18 #include <linux/module.h> 19 #include <linux/slab.h> 20 #include <linux/console.h> 21 #include <linux/clk.h> 22 #include <linux/tty.h> 23 #include <linux/tty_flip.h> 24 #include <linux/serial_core.h> 25 #include <linux/delay.h> 26 27 #include <asm/mach-pic32/pic32.h> 28 #include "pic32_uart.h" 29 30 /* UART name and device definitions */ 31 #define PIC32_DEV_NAME "pic32-uart" 32 #define PIC32_MAX_UARTS 6 33 #define PIC32_SDEV_NAME "ttyPIC" 34 35 /* pic32_sport pointer for console use */ 36 static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS]; 37 38 static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport) 39 { 40 /* wait for tx empty, otherwise chars will be lost or corrupted */ 41 while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT)) 42 udelay(1); 43 } 44 45 static inline int pic32_enable_clock(struct pic32_sport *sport) 46 { 47 int ret = clk_prepare_enable(sport->clk); 48 49 if (ret) 50 return ret; 51 52 sport->ref_clk++; 53 return 0; 54 } 55 56 static inline void pic32_disable_clock(struct pic32_sport *sport) 57 { 58 sport->ref_clk--; 59 clk_disable_unprepare(sport->clk); 60 } 61 62 /* serial core request to check if uart tx buffer is empty */ 63 static unsigned int pic32_uart_tx_empty(struct uart_port *port) 64 { 65 struct pic32_sport *sport = to_pic32_sport(port); 66 u32 val = pic32_uart_readl(sport, PIC32_UART_STA); 67 68 return (val & PIC32_UART_STA_TRMT) ? 1 : 0; 69 } 70 71 /* serial core request to set UART outputs */ 72 static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) 73 { 74 struct pic32_sport *sport = to_pic32_sport(port); 75 76 /* set loopback mode */ 77 if (mctrl & TIOCM_LOOP) 78 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 79 PIC32_UART_MODE_LPBK); 80 else 81 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 82 PIC32_UART_MODE_LPBK); 83 } 84 85 /* get the state of CTS input pin for this port */ 86 static unsigned int get_cts_state(struct pic32_sport *sport) 87 { 88 /* read and invert UxCTS */ 89 if (gpio_is_valid(sport->cts_gpio)) 90 return !gpio_get_value(sport->cts_gpio); 91 92 return 1; 93 } 94 95 /* serial core request to return the state of misc UART input pins */ 96 static unsigned int pic32_uart_get_mctrl(struct uart_port *port) 97 { 98 struct pic32_sport *sport = to_pic32_sport(port); 99 unsigned int mctrl = 0; 100 101 if (!sport->hw_flow_ctrl) 102 mctrl |= TIOCM_CTS; 103 else if (get_cts_state(sport)) 104 mctrl |= TIOCM_CTS; 105 106 /* DSR and CD are not supported in PIC32, so return 1 107 * RI is not supported in PIC32, so return 0 108 */ 109 mctrl |= TIOCM_CD; 110 mctrl |= TIOCM_DSR; 111 112 return mctrl; 113 } 114 115 /* stop tx and start tx are not called in pairs, therefore a flag indicates 116 * the status of irq to control the irq-depth. 117 */ 118 static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en) 119 { 120 if (en && !tx_irq_enabled(sport)) { 121 enable_irq(sport->irq_tx); 122 tx_irq_enabled(sport) = 1; 123 } else if (!en && tx_irq_enabled(sport)) { 124 /* use disable_irq_nosync() and not disable_irq() to avoid self 125 * imposed deadlock by not waiting for irq handler to end, 126 * since this callback is called from interrupt context. 127 */ 128 disable_irq_nosync(sport->irq_tx); 129 tx_irq_enabled(sport) = 0; 130 } 131 } 132 133 /* serial core request to disable tx ASAP (used for flow control) */ 134 static void pic32_uart_stop_tx(struct uart_port *port) 135 { 136 struct pic32_sport *sport = to_pic32_sport(port); 137 138 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) 139 return; 140 141 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) 142 return; 143 144 /* wait for tx empty */ 145 pic32_wait_deplete_txbuf(sport); 146 147 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 148 PIC32_UART_STA_UTXEN); 149 pic32_uart_irqtxen(sport, 0); 150 } 151 152 /* serial core request to (re)enable tx */ 153 static void pic32_uart_start_tx(struct uart_port *port) 154 { 155 struct pic32_sport *sport = to_pic32_sport(port); 156 157 pic32_uart_irqtxen(sport, 1); 158 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), 159 PIC32_UART_STA_UTXEN); 160 } 161 162 /* serial core request to stop rx, called before port shutdown */ 163 static void pic32_uart_stop_rx(struct uart_port *port) 164 { 165 struct pic32_sport *sport = to_pic32_sport(port); 166 167 /* disable rx interrupts */ 168 disable_irq(sport->irq_rx); 169 170 /* receiver Enable bit OFF */ 171 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 172 PIC32_UART_STA_URXEN); 173 } 174 175 /* serial core request to start/stop emitting break char */ 176 static void pic32_uart_break_ctl(struct uart_port *port, int ctl) 177 { 178 struct pic32_sport *sport = to_pic32_sport(port); 179 unsigned long flags; 180 181 spin_lock_irqsave(&port->lock, flags); 182 183 if (ctl) 184 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), 185 PIC32_UART_STA_UTXBRK); 186 else 187 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 188 PIC32_UART_STA_UTXBRK); 189 190 spin_unlock_irqrestore(&port->lock, flags); 191 } 192 193 /* get port type in string format */ 194 static const char *pic32_uart_type(struct uart_port *port) 195 { 196 return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL; 197 } 198 199 /* read all chars in rx fifo and send them to core */ 200 static void pic32_uart_do_rx(struct uart_port *port) 201 { 202 struct pic32_sport *sport = to_pic32_sport(port); 203 struct tty_port *tty; 204 unsigned int max_count; 205 206 /* limit number of char read in interrupt, should not be 207 * higher than fifo size anyway since we're much faster than 208 * serial port 209 */ 210 max_count = PIC32_UART_RX_FIFO_DEPTH; 211 212 spin_lock(&port->lock); 213 214 tty = &port->state->port; 215 216 do { 217 u32 sta_reg, c; 218 char flag; 219 220 /* get overrun/fifo empty information from status register */ 221 sta_reg = pic32_uart_readl(sport, PIC32_UART_STA); 222 if (unlikely(sta_reg & PIC32_UART_STA_OERR)) { 223 224 /* fifo reset is required to clear interrupt */ 225 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 226 PIC32_UART_STA_OERR); 227 228 port->icount.overrun++; 229 tty_insert_flip_char(tty, 0, TTY_OVERRUN); 230 } 231 232 /* Can at least one more character can be read? */ 233 if (!(sta_reg & PIC32_UART_STA_URXDA)) 234 break; 235 236 /* read the character and increment the rx counter */ 237 c = pic32_uart_readl(sport, PIC32_UART_RX); 238 239 port->icount.rx++; 240 flag = TTY_NORMAL; 241 c &= 0xff; 242 243 if (unlikely((sta_reg & PIC32_UART_STA_PERR) || 244 (sta_reg & PIC32_UART_STA_FERR))) { 245 246 /* do stats first */ 247 if (sta_reg & PIC32_UART_STA_PERR) 248 port->icount.parity++; 249 if (sta_reg & PIC32_UART_STA_FERR) 250 port->icount.frame++; 251 252 /* update flag wrt read_status_mask */ 253 sta_reg &= port->read_status_mask; 254 255 if (sta_reg & PIC32_UART_STA_FERR) 256 flag = TTY_FRAME; 257 if (sta_reg & PIC32_UART_STA_PERR) 258 flag = TTY_PARITY; 259 } 260 261 if (uart_handle_sysrq_char(port, c)) 262 continue; 263 264 if ((sta_reg & port->ignore_status_mask) == 0) 265 tty_insert_flip_char(tty, c, flag); 266 267 } while (--max_count); 268 269 spin_unlock(&port->lock); 270 271 tty_flip_buffer_push(tty); 272 } 273 274 /* fill tx fifo with chars to send, stop when fifo is about to be full 275 * or when all chars have been sent. 276 */ 277 static void pic32_uart_do_tx(struct uart_port *port) 278 { 279 struct pic32_sport *sport = to_pic32_sport(port); 280 struct circ_buf *xmit = &port->state->xmit; 281 unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH; 282 283 if (port->x_char) { 284 pic32_uart_writel(sport, PIC32_UART_TX, port->x_char); 285 port->icount.tx++; 286 port->x_char = 0; 287 return; 288 } 289 290 if (uart_tx_stopped(port)) { 291 pic32_uart_stop_tx(port); 292 return; 293 } 294 295 if (uart_circ_empty(xmit)) 296 goto txq_empty; 297 298 /* keep stuffing chars into uart tx buffer 299 * 1) until uart fifo is full 300 * or 301 * 2) until the circ buffer is empty 302 * (all chars have been sent) 303 * or 304 * 3) until the max count is reached 305 * (prevents lingering here for too long in certain cases) 306 */ 307 while (!(PIC32_UART_STA_UTXBF & 308 pic32_uart_readl(sport, PIC32_UART_STA))) { 309 unsigned int c = xmit->buf[xmit->tail]; 310 311 pic32_uart_writel(sport, PIC32_UART_TX, c); 312 313 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 314 port->icount.tx++; 315 if (uart_circ_empty(xmit)) 316 break; 317 if (--max_count == 0) 318 break; 319 } 320 321 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 322 uart_write_wakeup(port); 323 324 if (uart_circ_empty(xmit)) 325 goto txq_empty; 326 327 return; 328 329 txq_empty: 330 pic32_uart_irqtxen(sport, 0); 331 } 332 333 /* RX interrupt handler */ 334 static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id) 335 { 336 struct uart_port *port = dev_id; 337 338 pic32_uart_do_rx(port); 339 340 return IRQ_HANDLED; 341 } 342 343 /* TX interrupt handler */ 344 static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id) 345 { 346 struct uart_port *port = dev_id; 347 unsigned long flags; 348 349 spin_lock_irqsave(&port->lock, flags); 350 pic32_uart_do_tx(port); 351 spin_unlock_irqrestore(&port->lock, flags); 352 353 return IRQ_HANDLED; 354 } 355 356 /* FAULT interrupt handler */ 357 static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id) 358 { 359 /* do nothing: pic32_uart_do_rx() handles faults. */ 360 return IRQ_HANDLED; 361 } 362 363 /* enable rx & tx operation on uart */ 364 static void pic32_uart_en_and_unmask(struct uart_port *port) 365 { 366 struct pic32_sport *sport = to_pic32_sport(port); 367 368 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), 369 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); 370 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 371 PIC32_UART_MODE_ON); 372 } 373 374 /* disable rx & tx operation on uart */ 375 static void pic32_uart_dsbl_and_mask(struct uart_port *port) 376 { 377 struct pic32_sport *sport = to_pic32_sport(port); 378 379 /* wait for tx empty, otherwise chars will be lost or corrupted */ 380 pic32_wait_deplete_txbuf(sport); 381 382 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 383 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); 384 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 385 PIC32_UART_MODE_ON); 386 } 387 388 /* serial core request to initialize uart and start rx operation */ 389 static int pic32_uart_startup(struct uart_port *port) 390 { 391 struct pic32_sport *sport = to_pic32_sport(port); 392 u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1; 393 unsigned long flags; 394 int ret; 395 396 local_irq_save(flags); 397 398 ret = pic32_enable_clock(sport); 399 if (ret) { 400 local_irq_restore(flags); 401 goto out_done; 402 } 403 404 /* clear status and mode registers */ 405 pic32_uart_writel(sport, PIC32_UART_MODE, 0); 406 pic32_uart_writel(sport, PIC32_UART_STA, 0); 407 408 /* disable uart and mask all interrupts */ 409 pic32_uart_dsbl_and_mask(port); 410 411 /* set default baud */ 412 pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud); 413 414 local_irq_restore(flags); 415 416 /* Each UART of a PIC32 has three interrupts therefore, 417 * we setup driver to register the 3 irqs for the device. 418 * 419 * For each irq request_irq() is called with interrupt disabled. 420 * And the irq is enabled as soon as we are ready to handle them. 421 */ 422 tx_irq_enabled(sport) = 0; 423 424 sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault", 425 pic32_uart_type(port), 426 sport->idx); 427 if (!sport->irq_fault_name) { 428 dev_err(port->dev, "%s: kasprintf err!", __func__); 429 ret = -ENOMEM; 430 goto out_done; 431 } 432 irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN); 433 ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt, 434 sport->irqflags_fault, sport->irq_fault_name, port); 435 if (ret) { 436 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", 437 __func__, sport->irq_fault, ret, 438 pic32_uart_type(port)); 439 goto out_f; 440 } 441 442 sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx", 443 pic32_uart_type(port), 444 sport->idx); 445 if (!sport->irq_rx_name) { 446 dev_err(port->dev, "%s: kasprintf err!", __func__); 447 ret = -ENOMEM; 448 goto out_f; 449 } 450 irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN); 451 ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt, 452 sport->irqflags_rx, sport->irq_rx_name, port); 453 if (ret) { 454 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", 455 __func__, sport->irq_rx, ret, 456 pic32_uart_type(port)); 457 goto out_r; 458 } 459 460 sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx", 461 pic32_uart_type(port), 462 sport->idx); 463 if (!sport->irq_tx_name) { 464 dev_err(port->dev, "%s: kasprintf err!", __func__); 465 ret = -ENOMEM; 466 goto out_r; 467 } 468 irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN); 469 ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt, 470 sport->irqflags_tx, sport->irq_tx_name, port); 471 if (ret) { 472 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", 473 __func__, sport->irq_tx, ret, 474 pic32_uart_type(port)); 475 goto out_t; 476 } 477 478 local_irq_save(flags); 479 480 /* set rx interrupt on first receive */ 481 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 482 PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0); 483 484 /* set interrupt on empty */ 485 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 486 PIC32_UART_STA_UTXISEL1); 487 488 /* enable all interrupts and eanable uart */ 489 pic32_uart_en_and_unmask(port); 490 491 enable_irq(sport->irq_rx); 492 493 return 0; 494 495 out_t: 496 kfree(sport->irq_tx_name); 497 free_irq(sport->irq_tx, port); 498 out_r: 499 kfree(sport->irq_rx_name); 500 free_irq(sport->irq_rx, port); 501 out_f: 502 kfree(sport->irq_fault_name); 503 free_irq(sport->irq_fault, port); 504 out_done: 505 return ret; 506 } 507 508 /* serial core request to flush & disable uart */ 509 static void pic32_uart_shutdown(struct uart_port *port) 510 { 511 struct pic32_sport *sport = to_pic32_sport(port); 512 unsigned long flags; 513 514 /* disable uart */ 515 spin_lock_irqsave(&port->lock, flags); 516 pic32_uart_dsbl_and_mask(port); 517 spin_unlock_irqrestore(&port->lock, flags); 518 pic32_disable_clock(sport); 519 520 /* free all 3 interrupts for this UART */ 521 free_irq(sport->irq_fault, port); 522 free_irq(sport->irq_tx, port); 523 free_irq(sport->irq_rx, port); 524 } 525 526 /* serial core request to change current uart setting */ 527 static void pic32_uart_set_termios(struct uart_port *port, 528 struct ktermios *new, 529 struct ktermios *old) 530 { 531 struct pic32_sport *sport = to_pic32_sport(port); 532 unsigned int baud; 533 unsigned int quot; 534 unsigned long flags; 535 536 spin_lock_irqsave(&port->lock, flags); 537 538 /* disable uart and mask all interrupts while changing speed */ 539 pic32_uart_dsbl_and_mask(port); 540 541 /* stop bit options */ 542 if (new->c_cflag & CSTOPB) 543 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 544 PIC32_UART_MODE_STSEL); 545 else 546 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 547 PIC32_UART_MODE_STSEL); 548 549 /* parity options */ 550 if (new->c_cflag & PARENB) { 551 if (new->c_cflag & PARODD) { 552 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 553 PIC32_UART_MODE_PDSEL1); 554 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 555 PIC32_UART_MODE_PDSEL0); 556 } else { 557 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 558 PIC32_UART_MODE_PDSEL0); 559 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 560 PIC32_UART_MODE_PDSEL1); 561 } 562 } else { 563 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 564 PIC32_UART_MODE_PDSEL1 | 565 PIC32_UART_MODE_PDSEL0); 566 } 567 /* if hw flow ctrl, then the pins must be specified in device tree */ 568 if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) { 569 /* enable hardware flow control */ 570 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 571 PIC32_UART_MODE_UEN1); 572 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 573 PIC32_UART_MODE_UEN0); 574 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 575 PIC32_UART_MODE_RTSMD); 576 } else { 577 /* disable hardware flow control */ 578 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 579 PIC32_UART_MODE_UEN1); 580 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 581 PIC32_UART_MODE_UEN0); 582 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 583 PIC32_UART_MODE_RTSMD); 584 } 585 586 /* Always 8-bit */ 587 new->c_cflag |= CS8; 588 589 /* Mark/Space parity is not supported */ 590 new->c_cflag &= ~CMSPAR; 591 592 /* update baud */ 593 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); 594 quot = uart_get_divisor(port, baud) - 1; 595 pic32_uart_writel(sport, PIC32_UART_BRG, quot); 596 uart_update_timeout(port, new->c_cflag, baud); 597 598 if (tty_termios_baud_rate(new)) 599 tty_termios_encode_baud_rate(new, baud, baud); 600 601 /* enable uart */ 602 pic32_uart_en_and_unmask(port); 603 604 spin_unlock_irqrestore(&port->lock, flags); 605 } 606 607 /* serial core request to claim uart iomem */ 608 static int pic32_uart_request_port(struct uart_port *port) 609 { 610 struct platform_device *pdev = to_platform_device(port->dev); 611 struct resource *res_mem; 612 613 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 614 if (unlikely(!res_mem)) 615 return -EINVAL; 616 617 if (!request_mem_region(port->mapbase, resource_size(res_mem), 618 "pic32_uart_mem")) 619 return -EBUSY; 620 621 port->membase = devm_ioremap_nocache(port->dev, port->mapbase, 622 resource_size(res_mem)); 623 if (!port->membase) { 624 dev_err(port->dev, "Unable to map registers\n"); 625 release_mem_region(port->mapbase, resource_size(res_mem)); 626 return -ENOMEM; 627 } 628 629 return 0; 630 } 631 632 /* serial core request to release uart iomem */ 633 static void pic32_uart_release_port(struct uart_port *port) 634 { 635 struct platform_device *pdev = to_platform_device(port->dev); 636 struct resource *res_mem; 637 unsigned int res_size; 638 639 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 640 if (unlikely(!res_mem)) 641 return; 642 res_size = resource_size(res_mem); 643 644 release_mem_region(port->mapbase, res_size); 645 } 646 647 /* serial core request to do any port required auto-configuration */ 648 static void pic32_uart_config_port(struct uart_port *port, int flags) 649 { 650 if (flags & UART_CONFIG_TYPE) { 651 if (pic32_uart_request_port(port)) 652 return; 653 port->type = PORT_PIC32; 654 } 655 } 656 657 /* serial core request to check that port information in serinfo are suitable */ 658 static int pic32_uart_verify_port(struct uart_port *port, 659 struct serial_struct *serinfo) 660 { 661 if (port->type != PORT_PIC32) 662 return -EINVAL; 663 if (port->irq != serinfo->irq) 664 return -EINVAL; 665 if (port->iotype != serinfo->io_type) 666 return -EINVAL; 667 if (port->mapbase != (unsigned long)serinfo->iomem_base) 668 return -EINVAL; 669 670 return 0; 671 } 672 673 /* serial core callbacks */ 674 static const struct uart_ops pic32_uart_ops = { 675 .tx_empty = pic32_uart_tx_empty, 676 .get_mctrl = pic32_uart_get_mctrl, 677 .set_mctrl = pic32_uart_set_mctrl, 678 .start_tx = pic32_uart_start_tx, 679 .stop_tx = pic32_uart_stop_tx, 680 .stop_rx = pic32_uart_stop_rx, 681 .break_ctl = pic32_uart_break_ctl, 682 .startup = pic32_uart_startup, 683 .shutdown = pic32_uart_shutdown, 684 .set_termios = pic32_uart_set_termios, 685 .type = pic32_uart_type, 686 .release_port = pic32_uart_release_port, 687 .request_port = pic32_uart_request_port, 688 .config_port = pic32_uart_config_port, 689 .verify_port = pic32_uart_verify_port, 690 }; 691 692 #ifdef CONFIG_SERIAL_PIC32_CONSOLE 693 /* output given char */ 694 static void pic32_console_putchar(struct uart_port *port, int ch) 695 { 696 struct pic32_sport *sport = to_pic32_sport(port); 697 698 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) 699 return; 700 701 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) 702 return; 703 704 /* wait for tx empty */ 705 pic32_wait_deplete_txbuf(sport); 706 707 pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff); 708 } 709 710 /* console core request to output given string */ 711 static void pic32_console_write(struct console *co, const char *s, 712 unsigned int count) 713 { 714 struct pic32_sport *sport = pic32_sports[co->index]; 715 struct uart_port *port = pic32_get_port(sport); 716 717 /* call uart helper to deal with \r\n */ 718 uart_console_write(port, s, count, pic32_console_putchar); 719 } 720 721 /* console core request to setup given console, find matching uart 722 * port and setup it. 723 */ 724 static int pic32_console_setup(struct console *co, char *options) 725 { 726 struct pic32_sport *sport; 727 struct uart_port *port = NULL; 728 int baud = 115200; 729 int bits = 8; 730 int parity = 'n'; 731 int flow = 'n'; 732 int ret = 0; 733 734 if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS)) 735 return -ENODEV; 736 737 sport = pic32_sports[co->index]; 738 if (!sport) 739 return -ENODEV; 740 port = pic32_get_port(sport); 741 742 ret = pic32_enable_clock(sport); 743 if (ret) 744 return ret; 745 746 if (options) 747 uart_parse_options(options, &baud, &parity, &bits, &flow); 748 749 return uart_set_options(port, co, baud, parity, bits, flow); 750 } 751 752 static struct uart_driver pic32_uart_driver; 753 static struct console pic32_console = { 754 .name = PIC32_SDEV_NAME, 755 .write = pic32_console_write, 756 .device = uart_console_device, 757 .setup = pic32_console_setup, 758 .flags = CON_PRINTBUFFER, 759 .index = -1, 760 .data = &pic32_uart_driver, 761 }; 762 #define PIC32_SCONSOLE (&pic32_console) 763 764 static int __init pic32_console_init(void) 765 { 766 register_console(&pic32_console); 767 return 0; 768 } 769 console_initcall(pic32_console_init); 770 771 static inline bool is_pic32_console_port(struct uart_port *port) 772 { 773 return port->cons && port->cons->index == port->line; 774 } 775 776 /* 777 * Late console initialization. 778 */ 779 static int __init pic32_late_console_init(void) 780 { 781 if (!(pic32_console.flags & CON_ENABLED)) 782 register_console(&pic32_console); 783 784 return 0; 785 } 786 787 core_initcall(pic32_late_console_init); 788 789 #else 790 #define PIC32_SCONSOLE NULL 791 #endif 792 793 static struct uart_driver pic32_uart_driver = { 794 .owner = THIS_MODULE, 795 .driver_name = PIC32_DEV_NAME, 796 .dev_name = PIC32_SDEV_NAME, 797 .nr = PIC32_MAX_UARTS, 798 .cons = PIC32_SCONSOLE, 799 }; 800 801 static int pic32_uart_probe(struct platform_device *pdev) 802 { 803 struct device_node *np = pdev->dev.of_node; 804 struct pic32_sport *sport; 805 int uart_idx = 0; 806 struct resource *res_mem; 807 struct uart_port *port; 808 int ret; 809 810 uart_idx = of_alias_get_id(np, "serial"); 811 if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS) 812 return -EINVAL; 813 814 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 815 if (!res_mem) 816 return -EINVAL; 817 818 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); 819 if (!sport) 820 return -ENOMEM; 821 822 sport->idx = uart_idx; 823 sport->irq_fault = irq_of_parse_and_map(np, 0); 824 sport->irqflags_fault = IRQF_NO_THREAD; 825 sport->irq_rx = irq_of_parse_and_map(np, 1); 826 sport->irqflags_rx = IRQF_NO_THREAD; 827 sport->irq_tx = irq_of_parse_and_map(np, 2); 828 sport->irqflags_tx = IRQF_NO_THREAD; 829 sport->clk = devm_clk_get(&pdev->dev, NULL); 830 sport->cts_gpio = -EINVAL; 831 sport->dev = &pdev->dev; 832 833 /* Hardware flow control: gpios 834 * !Note: Basically, CTS is needed for reading the status. 835 */ 836 sport->hw_flow_ctrl = false; 837 sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0); 838 if (gpio_is_valid(sport->cts_gpio)) { 839 sport->hw_flow_ctrl = true; 840 841 ret = devm_gpio_request(sport->dev, 842 sport->cts_gpio, "CTS"); 843 if (ret) { 844 dev_err(&pdev->dev, 845 "error requesting CTS GPIO\n"); 846 goto err; 847 } 848 849 ret = gpio_direction_input(sport->cts_gpio); 850 if (ret) { 851 dev_err(&pdev->dev, "error setting CTS GPIO\n"); 852 goto err; 853 } 854 } 855 856 pic32_sports[uart_idx] = sport; 857 port = &sport->port; 858 memset(port, 0, sizeof(*port)); 859 port->iotype = UPIO_MEM; 860 port->mapbase = res_mem->start; 861 port->ops = &pic32_uart_ops; 862 port->flags = UPF_BOOT_AUTOCONF; 863 port->dev = &pdev->dev; 864 port->fifosize = PIC32_UART_TX_FIFO_DEPTH; 865 port->uartclk = clk_get_rate(sport->clk); 866 port->line = uart_idx; 867 868 ret = uart_add_one_port(&pic32_uart_driver, port); 869 if (ret) { 870 port->membase = NULL; 871 dev_err(port->dev, "%s: uart add port error!\n", __func__); 872 goto err; 873 } 874 875 #ifdef CONFIG_SERIAL_PIC32_CONSOLE 876 if (is_pic32_console_port(port) && 877 (pic32_console.flags & CON_ENABLED)) { 878 /* The peripheral clock has been enabled by console_setup, 879 * so disable it till the port is used. 880 */ 881 pic32_disable_clock(sport); 882 } 883 #endif 884 885 platform_set_drvdata(pdev, port); 886 887 dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n", 888 __func__, uart_idx); 889 890 return 0; 891 err: 892 /* automatic unroll of sport and gpios */ 893 return ret; 894 } 895 896 static int pic32_uart_remove(struct platform_device *pdev) 897 { 898 struct uart_port *port = platform_get_drvdata(pdev); 899 struct pic32_sport *sport = to_pic32_sport(port); 900 901 uart_remove_one_port(&pic32_uart_driver, port); 902 pic32_disable_clock(sport); 903 platform_set_drvdata(pdev, NULL); 904 pic32_sports[sport->idx] = NULL; 905 906 /* automatic unroll of sport and gpios */ 907 return 0; 908 } 909 910 static const struct of_device_id pic32_serial_dt_ids[] = { 911 { .compatible = "microchip,pic32mzda-uart" }, 912 { /* sentinel */ } 913 }; 914 MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids); 915 916 static struct platform_driver pic32_uart_platform_driver = { 917 .probe = pic32_uart_probe, 918 .remove = pic32_uart_remove, 919 .driver = { 920 .name = PIC32_DEV_NAME, 921 .of_match_table = of_match_ptr(pic32_serial_dt_ids), 922 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32), 923 }, 924 }; 925 926 static int __init pic32_uart_init(void) 927 { 928 int ret; 929 930 ret = uart_register_driver(&pic32_uart_driver); 931 if (ret) { 932 pr_err("failed to register %s:%d\n", 933 pic32_uart_driver.driver_name, ret); 934 return ret; 935 } 936 937 ret = platform_driver_register(&pic32_uart_platform_driver); 938 if (ret) { 939 pr_err("fail to register pic32 uart\n"); 940 uart_unregister_driver(&pic32_uart_driver); 941 } 942 943 return ret; 944 } 945 arch_initcall(pic32_uart_init); 946 947 static void __exit pic32_uart_exit(void) 948 { 949 #ifdef CONFIG_SERIAL_PIC32_CONSOLE 950 unregister_console(&pic32_console); 951 #endif 952 platform_driver_unregister(&pic32_uart_platform_driver); 953 uart_unregister_driver(&pic32_uart_driver); 954 } 955 module_exit(pic32_uart_exit); 956 957 MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>"); 958 MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver"); 959 MODULE_LICENSE("GPL v2"); 960