1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * PIC32 Integrated Serial Driver. 4 * 5 * Copyright (C) 2015 Microchip Technology, Inc. 6 * 7 * Authors: 8 * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/platform_device.h> 13 #include <linux/of.h> 14 #include <linux/of_irq.h> 15 #include <linux/of_gpio.h> 16 #include <linux/init.h> 17 #include <linux/module.h> 18 #include <linux/slab.h> 19 #include <linux/console.h> 20 #include <linux/clk.h> 21 #include <linux/tty.h> 22 #include <linux/tty_flip.h> 23 #include <linux/serial_core.h> 24 #include <linux/delay.h> 25 26 #include <asm/mach-pic32/pic32.h> 27 28 /* UART name and device definitions */ 29 #define PIC32_DEV_NAME "pic32-uart" 30 #define PIC32_MAX_UARTS 6 31 #define PIC32_SDEV_NAME "ttyPIC" 32 33 #define PIC32_UART_DFLT_BRATE 9600 34 #define PIC32_UART_TX_FIFO_DEPTH 8 35 #define PIC32_UART_RX_FIFO_DEPTH 8 36 37 #define PIC32_UART_MODE 0x00 38 #define PIC32_UART_STA 0x10 39 #define PIC32_UART_TX 0x20 40 #define PIC32_UART_RX 0x30 41 #define PIC32_UART_BRG 0x40 42 43 /* struct pic32_sport - pic32 serial port descriptor 44 * @port: uart port descriptor 45 * @idx: port index 46 * @irq_fault: virtual fault interrupt number 47 * @irq_fault_name: irq fault name 48 * @irq_rx: virtual rx interrupt number 49 * @irq_rx_name: irq rx name 50 * @irq_tx: virtual tx interrupt number 51 * @irq_tx_name: irq tx name 52 * @cts_gpiod: clear to send GPIO 53 * @dev: device descriptor 54 **/ 55 struct pic32_sport { 56 struct uart_port port; 57 int idx; 58 59 int irq_fault; 60 const char *irq_fault_name; 61 int irq_rx; 62 const char *irq_rx_name; 63 int irq_tx; 64 const char *irq_tx_name; 65 bool enable_tx_irq; 66 67 struct gpio_desc *cts_gpiod; 68 69 struct clk *clk; 70 71 struct device *dev; 72 }; 73 74 static inline struct pic32_sport *to_pic32_sport(struct uart_port *port) 75 { 76 return container_of(port, struct pic32_sport, port); 77 } 78 79 static inline void pic32_uart_writel(struct pic32_sport *sport, 80 u32 reg, u32 val) 81 { 82 __raw_writel(val, sport->port.membase + reg); 83 } 84 85 static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg) 86 { 87 return __raw_readl(sport->port.membase + reg); 88 } 89 90 /* pic32 uart mode register bits */ 91 #define PIC32_UART_MODE_ON BIT(15) 92 #define PIC32_UART_MODE_FRZ BIT(14) 93 #define PIC32_UART_MODE_SIDL BIT(13) 94 #define PIC32_UART_MODE_IREN BIT(12) 95 #define PIC32_UART_MODE_RTSMD BIT(11) 96 #define PIC32_UART_MODE_RESV1 BIT(10) 97 #define PIC32_UART_MODE_UEN1 BIT(9) 98 #define PIC32_UART_MODE_UEN0 BIT(8) 99 #define PIC32_UART_MODE_WAKE BIT(7) 100 #define PIC32_UART_MODE_LPBK BIT(6) 101 #define PIC32_UART_MODE_ABAUD BIT(5) 102 #define PIC32_UART_MODE_RXINV BIT(4) 103 #define PIC32_UART_MODE_BRGH BIT(3) 104 #define PIC32_UART_MODE_PDSEL1 BIT(2) 105 #define PIC32_UART_MODE_PDSEL0 BIT(1) 106 #define PIC32_UART_MODE_STSEL BIT(0) 107 108 /* pic32 uart status register bits */ 109 #define PIC32_UART_STA_UTXISEL1 BIT(15) 110 #define PIC32_UART_STA_UTXISEL0 BIT(14) 111 #define PIC32_UART_STA_UTXINV BIT(13) 112 #define PIC32_UART_STA_URXEN BIT(12) 113 #define PIC32_UART_STA_UTXBRK BIT(11) 114 #define PIC32_UART_STA_UTXEN BIT(10) 115 #define PIC32_UART_STA_UTXBF BIT(9) 116 #define PIC32_UART_STA_TRMT BIT(8) 117 #define PIC32_UART_STA_URXISEL1 BIT(7) 118 #define PIC32_UART_STA_URXISEL0 BIT(6) 119 #define PIC32_UART_STA_ADDEN BIT(5) 120 #define PIC32_UART_STA_RIDLE BIT(4) 121 #define PIC32_UART_STA_PERR BIT(3) 122 #define PIC32_UART_STA_FERR BIT(2) 123 #define PIC32_UART_STA_OERR BIT(1) 124 #define PIC32_UART_STA_URXDA BIT(0) 125 126 /* pic32_sport pointer for console use */ 127 static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS]; 128 129 static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport) 130 { 131 /* wait for tx empty, otherwise chars will be lost or corrupted */ 132 while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT)) 133 udelay(1); 134 } 135 136 /* serial core request to check if uart tx buffer is empty */ 137 static unsigned int pic32_uart_tx_empty(struct uart_port *port) 138 { 139 struct pic32_sport *sport = to_pic32_sport(port); 140 u32 val = pic32_uart_readl(sport, PIC32_UART_STA); 141 142 return (val & PIC32_UART_STA_TRMT) ? 1 : 0; 143 } 144 145 /* serial core request to set UART outputs */ 146 static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) 147 { 148 struct pic32_sport *sport = to_pic32_sport(port); 149 150 /* set loopback mode */ 151 if (mctrl & TIOCM_LOOP) 152 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 153 PIC32_UART_MODE_LPBK); 154 else 155 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 156 PIC32_UART_MODE_LPBK); 157 } 158 159 /* serial core request to return the state of misc UART input pins */ 160 static unsigned int pic32_uart_get_mctrl(struct uart_port *port) 161 { 162 struct pic32_sport *sport = to_pic32_sport(port); 163 unsigned int mctrl = 0; 164 165 /* get the state of CTS input pin for this port */ 166 if (!sport->cts_gpiod) 167 mctrl |= TIOCM_CTS; 168 else if (gpiod_get_value(sport->cts_gpiod)) 169 mctrl |= TIOCM_CTS; 170 171 /* DSR and CD are not supported in PIC32, so return 1 172 * RI is not supported in PIC32, so return 0 173 */ 174 mctrl |= TIOCM_CD; 175 mctrl |= TIOCM_DSR; 176 177 return mctrl; 178 } 179 180 /* stop tx and start tx are not called in pairs, therefore a flag indicates 181 * the status of irq to control the irq-depth. 182 */ 183 static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en) 184 { 185 if (en && !sport->enable_tx_irq) { 186 enable_irq(sport->irq_tx); 187 sport->enable_tx_irq = true; 188 } else if (!en && sport->enable_tx_irq) { 189 /* use disable_irq_nosync() and not disable_irq() to avoid self 190 * imposed deadlock by not waiting for irq handler to end, 191 * since this callback is called from interrupt context. 192 */ 193 disable_irq_nosync(sport->irq_tx); 194 sport->enable_tx_irq = false; 195 } 196 } 197 198 /* serial core request to disable tx ASAP (used for flow control) */ 199 static void pic32_uart_stop_tx(struct uart_port *port) 200 { 201 struct pic32_sport *sport = to_pic32_sport(port); 202 203 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) 204 return; 205 206 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) 207 return; 208 209 /* wait for tx empty */ 210 pic32_wait_deplete_txbuf(sport); 211 212 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 213 PIC32_UART_STA_UTXEN); 214 pic32_uart_irqtxen(sport, 0); 215 } 216 217 /* serial core request to (re)enable tx */ 218 static void pic32_uart_start_tx(struct uart_port *port) 219 { 220 struct pic32_sport *sport = to_pic32_sport(port); 221 222 pic32_uart_irqtxen(sport, 1); 223 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), 224 PIC32_UART_STA_UTXEN); 225 } 226 227 /* serial core request to stop rx, called before port shutdown */ 228 static void pic32_uart_stop_rx(struct uart_port *port) 229 { 230 struct pic32_sport *sport = to_pic32_sport(port); 231 232 /* disable rx interrupts */ 233 disable_irq(sport->irq_rx); 234 235 /* receiver Enable bit OFF */ 236 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 237 PIC32_UART_STA_URXEN); 238 } 239 240 /* serial core request to start/stop emitting break char */ 241 static void pic32_uart_break_ctl(struct uart_port *port, int ctl) 242 { 243 struct pic32_sport *sport = to_pic32_sport(port); 244 unsigned long flags; 245 246 spin_lock_irqsave(&port->lock, flags); 247 248 if (ctl) 249 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), 250 PIC32_UART_STA_UTXBRK); 251 else 252 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 253 PIC32_UART_STA_UTXBRK); 254 255 spin_unlock_irqrestore(&port->lock, flags); 256 } 257 258 /* get port type in string format */ 259 static const char *pic32_uart_type(struct uart_port *port) 260 { 261 return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL; 262 } 263 264 /* read all chars in rx fifo and send them to core */ 265 static void pic32_uart_do_rx(struct uart_port *port) 266 { 267 struct pic32_sport *sport = to_pic32_sport(port); 268 struct tty_port *tty; 269 unsigned int max_count; 270 271 /* limit number of char read in interrupt, should not be 272 * higher than fifo size anyway since we're much faster than 273 * serial port 274 */ 275 max_count = PIC32_UART_RX_FIFO_DEPTH; 276 277 spin_lock(&port->lock); 278 279 tty = &port->state->port; 280 281 do { 282 u32 sta_reg, c; 283 char flag; 284 285 /* get overrun/fifo empty information from status register */ 286 sta_reg = pic32_uart_readl(sport, PIC32_UART_STA); 287 if (unlikely(sta_reg & PIC32_UART_STA_OERR)) { 288 289 /* fifo reset is required to clear interrupt */ 290 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 291 PIC32_UART_STA_OERR); 292 293 port->icount.overrun++; 294 tty_insert_flip_char(tty, 0, TTY_OVERRUN); 295 } 296 297 /* Can at least one more character can be read? */ 298 if (!(sta_reg & PIC32_UART_STA_URXDA)) 299 break; 300 301 /* read the character and increment the rx counter */ 302 c = pic32_uart_readl(sport, PIC32_UART_RX); 303 304 port->icount.rx++; 305 flag = TTY_NORMAL; 306 c &= 0xff; 307 308 if (unlikely((sta_reg & PIC32_UART_STA_PERR) || 309 (sta_reg & PIC32_UART_STA_FERR))) { 310 311 /* do stats first */ 312 if (sta_reg & PIC32_UART_STA_PERR) 313 port->icount.parity++; 314 if (sta_reg & PIC32_UART_STA_FERR) 315 port->icount.frame++; 316 317 /* update flag wrt read_status_mask */ 318 sta_reg &= port->read_status_mask; 319 320 if (sta_reg & PIC32_UART_STA_FERR) 321 flag = TTY_FRAME; 322 if (sta_reg & PIC32_UART_STA_PERR) 323 flag = TTY_PARITY; 324 } 325 326 if (uart_handle_sysrq_char(port, c)) 327 continue; 328 329 if ((sta_reg & port->ignore_status_mask) == 0) 330 tty_insert_flip_char(tty, c, flag); 331 332 } while (--max_count); 333 334 spin_unlock(&port->lock); 335 336 tty_flip_buffer_push(tty); 337 } 338 339 /* fill tx fifo with chars to send, stop when fifo is about to be full 340 * or when all chars have been sent. 341 */ 342 static void pic32_uart_do_tx(struct uart_port *port) 343 { 344 struct pic32_sport *sport = to_pic32_sport(port); 345 struct circ_buf *xmit = &port->state->xmit; 346 unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH; 347 348 if (port->x_char) { 349 pic32_uart_writel(sport, PIC32_UART_TX, port->x_char); 350 port->icount.tx++; 351 port->x_char = 0; 352 return; 353 } 354 355 if (uart_tx_stopped(port)) { 356 pic32_uart_stop_tx(port); 357 return; 358 } 359 360 if (uart_circ_empty(xmit)) 361 goto txq_empty; 362 363 /* keep stuffing chars into uart tx buffer 364 * 1) until uart fifo is full 365 * or 366 * 2) until the circ buffer is empty 367 * (all chars have been sent) 368 * or 369 * 3) until the max count is reached 370 * (prevents lingering here for too long in certain cases) 371 */ 372 while (!(PIC32_UART_STA_UTXBF & 373 pic32_uart_readl(sport, PIC32_UART_STA))) { 374 unsigned int c = xmit->buf[xmit->tail]; 375 376 pic32_uart_writel(sport, PIC32_UART_TX, c); 377 378 uart_xmit_advance(port, 1); 379 if (uart_circ_empty(xmit)) 380 break; 381 if (--max_count == 0) 382 break; 383 } 384 385 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 386 uart_write_wakeup(port); 387 388 if (uart_circ_empty(xmit)) 389 goto txq_empty; 390 391 return; 392 393 txq_empty: 394 pic32_uart_irqtxen(sport, 0); 395 } 396 397 /* RX interrupt handler */ 398 static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id) 399 { 400 struct uart_port *port = dev_id; 401 402 pic32_uart_do_rx(port); 403 404 return IRQ_HANDLED; 405 } 406 407 /* TX interrupt handler */ 408 static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id) 409 { 410 struct uart_port *port = dev_id; 411 unsigned long flags; 412 413 spin_lock_irqsave(&port->lock, flags); 414 pic32_uart_do_tx(port); 415 spin_unlock_irqrestore(&port->lock, flags); 416 417 return IRQ_HANDLED; 418 } 419 420 /* FAULT interrupt handler */ 421 static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id) 422 { 423 /* do nothing: pic32_uart_do_rx() handles faults. */ 424 return IRQ_HANDLED; 425 } 426 427 /* enable rx & tx operation on uart */ 428 static void pic32_uart_en_and_unmask(struct uart_port *port) 429 { 430 struct pic32_sport *sport = to_pic32_sport(port); 431 432 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), 433 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); 434 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 435 PIC32_UART_MODE_ON); 436 } 437 438 /* disable rx & tx operation on uart */ 439 static void pic32_uart_dsbl_and_mask(struct uart_port *port) 440 { 441 struct pic32_sport *sport = to_pic32_sport(port); 442 443 /* wait for tx empty, otherwise chars will be lost or corrupted */ 444 pic32_wait_deplete_txbuf(sport); 445 446 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 447 PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); 448 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 449 PIC32_UART_MODE_ON); 450 } 451 452 /* serial core request to initialize uart and start rx operation */ 453 static int pic32_uart_startup(struct uart_port *port) 454 { 455 struct pic32_sport *sport = to_pic32_sport(port); 456 u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1; 457 unsigned long flags; 458 int ret; 459 460 local_irq_save(flags); 461 462 ret = clk_prepare_enable(sport->clk); 463 if (ret) { 464 local_irq_restore(flags); 465 goto out_done; 466 } 467 468 /* clear status and mode registers */ 469 pic32_uart_writel(sport, PIC32_UART_MODE, 0); 470 pic32_uart_writel(sport, PIC32_UART_STA, 0); 471 472 /* disable uart and mask all interrupts */ 473 pic32_uart_dsbl_and_mask(port); 474 475 /* set default baud */ 476 pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud); 477 478 local_irq_restore(flags); 479 480 /* Each UART of a PIC32 has three interrupts therefore, 481 * we setup driver to register the 3 irqs for the device. 482 * 483 * For each irq request_irq() is called with interrupt disabled. 484 * And the irq is enabled as soon as we are ready to handle them. 485 */ 486 sport->enable_tx_irq = false; 487 488 sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault", 489 pic32_uart_type(port), 490 sport->idx); 491 if (!sport->irq_fault_name) { 492 dev_err(port->dev, "%s: kasprintf err!", __func__); 493 ret = -ENOMEM; 494 goto out_disable_clk; 495 } 496 irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN); 497 ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt, 498 IRQF_NO_THREAD, sport->irq_fault_name, port); 499 if (ret) { 500 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", 501 __func__, sport->irq_fault, ret, 502 pic32_uart_type(port)); 503 goto out_f; 504 } 505 506 sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx", 507 pic32_uart_type(port), 508 sport->idx); 509 if (!sport->irq_rx_name) { 510 dev_err(port->dev, "%s: kasprintf err!", __func__); 511 ret = -ENOMEM; 512 goto out_f; 513 } 514 irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN); 515 ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt, 516 IRQF_NO_THREAD, sport->irq_rx_name, port); 517 if (ret) { 518 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", 519 __func__, sport->irq_rx, ret, 520 pic32_uart_type(port)); 521 goto out_r; 522 } 523 524 sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx", 525 pic32_uart_type(port), 526 sport->idx); 527 if (!sport->irq_tx_name) { 528 dev_err(port->dev, "%s: kasprintf err!", __func__); 529 ret = -ENOMEM; 530 goto out_r; 531 } 532 irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN); 533 ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt, 534 IRQF_NO_THREAD, sport->irq_tx_name, port); 535 if (ret) { 536 dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", 537 __func__, sport->irq_tx, ret, 538 pic32_uart_type(port)); 539 goto out_t; 540 } 541 542 local_irq_save(flags); 543 544 /* set rx interrupt on first receive */ 545 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 546 PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0); 547 548 /* set interrupt on empty */ 549 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), 550 PIC32_UART_STA_UTXISEL1); 551 552 /* enable all interrupts and eanable uart */ 553 pic32_uart_en_and_unmask(port); 554 555 local_irq_restore(flags); 556 557 enable_irq(sport->irq_rx); 558 559 return 0; 560 561 out_t: 562 free_irq(sport->irq_tx, port); 563 kfree(sport->irq_tx_name); 564 out_r: 565 free_irq(sport->irq_rx, port); 566 kfree(sport->irq_rx_name); 567 out_f: 568 free_irq(sport->irq_fault, port); 569 kfree(sport->irq_fault_name); 570 out_disable_clk: 571 clk_disable_unprepare(sport->clk); 572 out_done: 573 return ret; 574 } 575 576 /* serial core request to flush & disable uart */ 577 static void pic32_uart_shutdown(struct uart_port *port) 578 { 579 struct pic32_sport *sport = to_pic32_sport(port); 580 unsigned long flags; 581 582 /* disable uart */ 583 spin_lock_irqsave(&port->lock, flags); 584 pic32_uart_dsbl_and_mask(port); 585 spin_unlock_irqrestore(&port->lock, flags); 586 clk_disable_unprepare(sport->clk); 587 588 /* free all 3 interrupts for this UART */ 589 free_irq(sport->irq_fault, port); 590 kfree(sport->irq_fault_name); 591 free_irq(sport->irq_tx, port); 592 kfree(sport->irq_tx_name); 593 free_irq(sport->irq_rx, port); 594 kfree(sport->irq_rx_name); 595 } 596 597 /* serial core request to change current uart setting */ 598 static void pic32_uart_set_termios(struct uart_port *port, 599 struct ktermios *new, 600 const struct ktermios *old) 601 { 602 struct pic32_sport *sport = to_pic32_sport(port); 603 unsigned int baud; 604 unsigned int quot; 605 unsigned long flags; 606 607 spin_lock_irqsave(&port->lock, flags); 608 609 /* disable uart and mask all interrupts while changing speed */ 610 pic32_uart_dsbl_and_mask(port); 611 612 /* stop bit options */ 613 if (new->c_cflag & CSTOPB) 614 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 615 PIC32_UART_MODE_STSEL); 616 else 617 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 618 PIC32_UART_MODE_STSEL); 619 620 /* parity options */ 621 if (new->c_cflag & PARENB) { 622 if (new->c_cflag & PARODD) { 623 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 624 PIC32_UART_MODE_PDSEL1); 625 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 626 PIC32_UART_MODE_PDSEL0); 627 } else { 628 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 629 PIC32_UART_MODE_PDSEL0); 630 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 631 PIC32_UART_MODE_PDSEL1); 632 } 633 } else { 634 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 635 PIC32_UART_MODE_PDSEL1 | 636 PIC32_UART_MODE_PDSEL0); 637 } 638 /* if hw flow ctrl, then the pins must be specified in device tree */ 639 if ((new->c_cflag & CRTSCTS) && sport->cts_gpiod) { 640 /* enable hardware flow control */ 641 pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), 642 PIC32_UART_MODE_UEN1); 643 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 644 PIC32_UART_MODE_UEN0); 645 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 646 PIC32_UART_MODE_RTSMD); 647 } else { 648 /* disable hardware flow control */ 649 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 650 PIC32_UART_MODE_UEN1); 651 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 652 PIC32_UART_MODE_UEN0); 653 pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), 654 PIC32_UART_MODE_RTSMD); 655 } 656 657 /* Always 8-bit */ 658 new->c_cflag |= CS8; 659 660 /* Mark/Space parity is not supported */ 661 new->c_cflag &= ~CMSPAR; 662 663 /* update baud */ 664 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); 665 quot = uart_get_divisor(port, baud) - 1; 666 pic32_uart_writel(sport, PIC32_UART_BRG, quot); 667 uart_update_timeout(port, new->c_cflag, baud); 668 669 if (tty_termios_baud_rate(new)) 670 tty_termios_encode_baud_rate(new, baud, baud); 671 672 /* enable uart */ 673 pic32_uart_en_and_unmask(port); 674 675 spin_unlock_irqrestore(&port->lock, flags); 676 } 677 678 /* serial core request to claim uart iomem */ 679 static int pic32_uart_request_port(struct uart_port *port) 680 { 681 struct platform_device *pdev = to_platform_device(port->dev); 682 struct resource *res_mem; 683 684 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 685 if (unlikely(!res_mem)) 686 return -EINVAL; 687 688 if (!request_mem_region(port->mapbase, resource_size(res_mem), 689 "pic32_uart_mem")) 690 return -EBUSY; 691 692 port->membase = devm_ioremap(port->dev, port->mapbase, 693 resource_size(res_mem)); 694 if (!port->membase) { 695 dev_err(port->dev, "Unable to map registers\n"); 696 release_mem_region(port->mapbase, resource_size(res_mem)); 697 return -ENOMEM; 698 } 699 700 return 0; 701 } 702 703 /* serial core request to release uart iomem */ 704 static void pic32_uart_release_port(struct uart_port *port) 705 { 706 struct platform_device *pdev = to_platform_device(port->dev); 707 struct resource *res_mem; 708 unsigned int res_size; 709 710 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 711 if (unlikely(!res_mem)) 712 return; 713 res_size = resource_size(res_mem); 714 715 release_mem_region(port->mapbase, res_size); 716 } 717 718 /* serial core request to do any port required auto-configuration */ 719 static void pic32_uart_config_port(struct uart_port *port, int flags) 720 { 721 if (flags & UART_CONFIG_TYPE) { 722 if (pic32_uart_request_port(port)) 723 return; 724 port->type = PORT_PIC32; 725 } 726 } 727 728 /* serial core request to check that port information in serinfo are suitable */ 729 static int pic32_uart_verify_port(struct uart_port *port, 730 struct serial_struct *serinfo) 731 { 732 if (port->type != PORT_PIC32) 733 return -EINVAL; 734 if (port->irq != serinfo->irq) 735 return -EINVAL; 736 if (port->iotype != serinfo->io_type) 737 return -EINVAL; 738 if (port->mapbase != (unsigned long)serinfo->iomem_base) 739 return -EINVAL; 740 741 return 0; 742 } 743 744 /* serial core callbacks */ 745 static const struct uart_ops pic32_uart_ops = { 746 .tx_empty = pic32_uart_tx_empty, 747 .get_mctrl = pic32_uart_get_mctrl, 748 .set_mctrl = pic32_uart_set_mctrl, 749 .start_tx = pic32_uart_start_tx, 750 .stop_tx = pic32_uart_stop_tx, 751 .stop_rx = pic32_uart_stop_rx, 752 .break_ctl = pic32_uart_break_ctl, 753 .startup = pic32_uart_startup, 754 .shutdown = pic32_uart_shutdown, 755 .set_termios = pic32_uart_set_termios, 756 .type = pic32_uart_type, 757 .release_port = pic32_uart_release_port, 758 .request_port = pic32_uart_request_port, 759 .config_port = pic32_uart_config_port, 760 .verify_port = pic32_uart_verify_port, 761 }; 762 763 #ifdef CONFIG_SERIAL_PIC32_CONSOLE 764 /* output given char */ 765 static void pic32_console_putchar(struct uart_port *port, unsigned char ch) 766 { 767 struct pic32_sport *sport = to_pic32_sport(port); 768 769 if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) 770 return; 771 772 if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) 773 return; 774 775 /* wait for tx empty */ 776 pic32_wait_deplete_txbuf(sport); 777 778 pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff); 779 } 780 781 /* console core request to output given string */ 782 static void pic32_console_write(struct console *co, const char *s, 783 unsigned int count) 784 { 785 struct pic32_sport *sport = pic32_sports[co->index]; 786 787 /* call uart helper to deal with \r\n */ 788 uart_console_write(&sport->port, s, count, pic32_console_putchar); 789 } 790 791 /* console core request to setup given console, find matching uart 792 * port and setup it. 793 */ 794 static int pic32_console_setup(struct console *co, char *options) 795 { 796 struct pic32_sport *sport; 797 int baud = 115200; 798 int bits = 8; 799 int parity = 'n'; 800 int flow = 'n'; 801 int ret = 0; 802 803 if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS)) 804 return -ENODEV; 805 806 sport = pic32_sports[co->index]; 807 if (!sport) 808 return -ENODEV; 809 810 ret = clk_prepare_enable(sport->clk); 811 if (ret) 812 return ret; 813 814 if (options) 815 uart_parse_options(options, &baud, &parity, &bits, &flow); 816 817 return uart_set_options(&sport->port, co, baud, parity, bits, flow); 818 } 819 820 static struct uart_driver pic32_uart_driver; 821 static struct console pic32_console = { 822 .name = PIC32_SDEV_NAME, 823 .write = pic32_console_write, 824 .device = uart_console_device, 825 .setup = pic32_console_setup, 826 .flags = CON_PRINTBUFFER, 827 .index = -1, 828 .data = &pic32_uart_driver, 829 }; 830 #define PIC32_SCONSOLE (&pic32_console) 831 832 static int __init pic32_console_init(void) 833 { 834 register_console(&pic32_console); 835 return 0; 836 } 837 console_initcall(pic32_console_init); 838 839 /* 840 * Late console initialization. 841 */ 842 static int __init pic32_late_console_init(void) 843 { 844 if (!console_is_registered(&pic32_console)) 845 register_console(&pic32_console); 846 847 return 0; 848 } 849 850 core_initcall(pic32_late_console_init); 851 852 #else 853 #define PIC32_SCONSOLE NULL 854 #endif 855 856 static struct uart_driver pic32_uart_driver = { 857 .owner = THIS_MODULE, 858 .driver_name = PIC32_DEV_NAME, 859 .dev_name = PIC32_SDEV_NAME, 860 .nr = PIC32_MAX_UARTS, 861 .cons = PIC32_SCONSOLE, 862 }; 863 864 static int pic32_uart_probe(struct platform_device *pdev) 865 { 866 struct device *dev = &pdev->dev; 867 struct device_node *np = dev->of_node; 868 struct pic32_sport *sport; 869 int uart_idx = 0; 870 struct resource *res_mem; 871 struct uart_port *port; 872 int ret; 873 874 uart_idx = of_alias_get_id(np, "serial"); 875 if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS) 876 return -EINVAL; 877 878 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 879 if (!res_mem) 880 return -EINVAL; 881 882 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); 883 if (!sport) 884 return -ENOMEM; 885 886 sport->idx = uart_idx; 887 sport->irq_fault = irq_of_parse_and_map(np, 0); 888 sport->irq_rx = irq_of_parse_and_map(np, 1); 889 sport->irq_tx = irq_of_parse_and_map(np, 2); 890 sport->clk = devm_clk_get(&pdev->dev, NULL); 891 if (IS_ERR(sport->clk)) 892 return PTR_ERR(sport->clk); 893 sport->dev = &pdev->dev; 894 895 /* Hardware flow control: gpios 896 * !Note: Basically, CTS is needed for reading the status. 897 */ 898 sport->cts_gpiod = devm_gpiod_get_optional(dev, "cts", GPIOD_IN); 899 if (IS_ERR(sport->cts_gpiod)) 900 return dev_err_probe(dev, PTR_ERR(sport->cts_gpiod), "error requesting CTS GPIO\n"); 901 gpiod_set_consumer_name(sport->cts_gpiod, "CTS"); 902 903 pic32_sports[uart_idx] = sport; 904 port = &sport->port; 905 port->iotype = UPIO_MEM; 906 port->mapbase = res_mem->start; 907 port->ops = &pic32_uart_ops; 908 port->flags = UPF_BOOT_AUTOCONF; 909 port->dev = &pdev->dev; 910 port->fifosize = PIC32_UART_TX_FIFO_DEPTH; 911 port->uartclk = clk_get_rate(sport->clk); 912 port->line = uart_idx; 913 914 ret = uart_add_one_port(&pic32_uart_driver, port); 915 if (ret) { 916 port->membase = NULL; 917 dev_err(port->dev, "%s: uart add port error!\n", __func__); 918 goto err; 919 } 920 921 #ifdef CONFIG_SERIAL_PIC32_CONSOLE 922 if (uart_console_registered(port)) { 923 /* The peripheral clock has been enabled by console_setup, 924 * so disable it till the port is used. 925 */ 926 clk_disable_unprepare(sport->clk); 927 } 928 #endif 929 930 platform_set_drvdata(pdev, port); 931 932 dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n", 933 __func__, uart_idx); 934 935 return 0; 936 err: 937 /* automatic unroll of sport and gpios */ 938 return ret; 939 } 940 941 static int pic32_uart_remove(struct platform_device *pdev) 942 { 943 struct uart_port *port = platform_get_drvdata(pdev); 944 struct pic32_sport *sport = to_pic32_sport(port); 945 946 uart_remove_one_port(&pic32_uart_driver, port); 947 clk_disable_unprepare(sport->clk); 948 platform_set_drvdata(pdev, NULL); 949 pic32_sports[sport->idx] = NULL; 950 951 /* automatic unroll of sport and gpios */ 952 return 0; 953 } 954 955 static const struct of_device_id pic32_serial_dt_ids[] = { 956 { .compatible = "microchip,pic32mzda-uart" }, 957 { /* sentinel */ } 958 }; 959 MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids); 960 961 static struct platform_driver pic32_uart_platform_driver = { 962 .probe = pic32_uart_probe, 963 .remove = pic32_uart_remove, 964 .driver = { 965 .name = PIC32_DEV_NAME, 966 .of_match_table = of_match_ptr(pic32_serial_dt_ids), 967 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32), 968 }, 969 }; 970 971 static int __init pic32_uart_init(void) 972 { 973 int ret; 974 975 ret = uart_register_driver(&pic32_uart_driver); 976 if (ret) { 977 pr_err("failed to register %s:%d\n", 978 pic32_uart_driver.driver_name, ret); 979 return ret; 980 } 981 982 ret = platform_driver_register(&pic32_uart_platform_driver); 983 if (ret) { 984 pr_err("fail to register pic32 uart\n"); 985 uart_unregister_driver(&pic32_uart_driver); 986 } 987 988 return ret; 989 } 990 arch_initcall(pic32_uart_init); 991 992 static void __exit pic32_uart_exit(void) 993 { 994 #ifdef CONFIG_SERIAL_PIC32_CONSOLE 995 unregister_console(&pic32_console); 996 #endif 997 platform_driver_unregister(&pic32_uart_platform_driver); 998 uart_unregister_driver(&pic32_uart_driver); 999 } 1000 module_exit(pic32_uart_exit); 1001 1002 MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>"); 1003 MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver"); 1004 MODULE_LICENSE("GPL v2"); 1005