1 /* 2 * Freescale STMP37XX/STMP378X Application UART driver 3 * 4 * Author: dmitry pervushin <dimka@embeddedalley.com> 5 * 6 * Copyright 2008-2010 Freescale Semiconductor, Inc. 7 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. 8 * 9 * The code contained herein is licensed under the GNU General Public 10 * License. You may obtain a copy of the GNU General Public License 11 * Version 2 or later at the following locations: 12 * 13 * http://www.opensource.org/licenses/gpl-license.html 14 * http://www.gnu.org/copyleft/gpl.html 15 */ 16 17 #include <linux/kernel.h> 18 #include <linux/errno.h> 19 #include <linux/init.h> 20 #include <linux/console.h> 21 #include <linux/interrupt.h> 22 #include <linux/module.h> 23 #include <linux/slab.h> 24 #include <linux/wait.h> 25 #include <linux/tty.h> 26 #include <linux/tty_driver.h> 27 #include <linux/tty_flip.h> 28 #include <linux/serial.h> 29 #include <linux/serial_core.h> 30 #include <linux/platform_device.h> 31 #include <linux/device.h> 32 #include <linux/clk.h> 33 #include <linux/delay.h> 34 #include <linux/io.h> 35 #include <linux/of_device.h> 36 #include <linux/dma-mapping.h> 37 #include <linux/dmaengine.h> 38 39 #include <asm/cacheflush.h> 40 41 #define MXS_AUART_PORTS 5 42 #define MXS_AUART_FIFO_SIZE 16 43 44 #define AUART_CTRL0 0x00000000 45 #define AUART_CTRL0_SET 0x00000004 46 #define AUART_CTRL0_CLR 0x00000008 47 #define AUART_CTRL0_TOG 0x0000000c 48 #define AUART_CTRL1 0x00000010 49 #define AUART_CTRL1_SET 0x00000014 50 #define AUART_CTRL1_CLR 0x00000018 51 #define AUART_CTRL1_TOG 0x0000001c 52 #define AUART_CTRL2 0x00000020 53 #define AUART_CTRL2_SET 0x00000024 54 #define AUART_CTRL2_CLR 0x00000028 55 #define AUART_CTRL2_TOG 0x0000002c 56 #define AUART_LINECTRL 0x00000030 57 #define AUART_LINECTRL_SET 0x00000034 58 #define AUART_LINECTRL_CLR 0x00000038 59 #define AUART_LINECTRL_TOG 0x0000003c 60 #define AUART_LINECTRL2 0x00000040 61 #define AUART_LINECTRL2_SET 0x00000044 62 #define AUART_LINECTRL2_CLR 0x00000048 63 #define AUART_LINECTRL2_TOG 0x0000004c 64 #define AUART_INTR 0x00000050 65 #define AUART_INTR_SET 0x00000054 66 #define AUART_INTR_CLR 0x00000058 67 #define AUART_INTR_TOG 0x0000005c 68 #define AUART_DATA 0x00000060 69 #define AUART_STAT 0x00000070 70 #define AUART_DEBUG 0x00000080 71 #define AUART_VERSION 0x00000090 72 #define AUART_AUTOBAUD 0x000000a0 73 74 #define AUART_CTRL0_SFTRST (1 << 31) 75 #define AUART_CTRL0_CLKGATE (1 << 30) 76 #define AUART_CTRL0_RXTO_ENABLE (1 << 27) 77 #define AUART_CTRL0_RXTIMEOUT(v) (((v) & 0x7ff) << 16) 78 #define AUART_CTRL0_XFER_COUNT(v) ((v) & 0xffff) 79 80 #define AUART_CTRL1_XFER_COUNT(v) ((v) & 0xffff) 81 82 #define AUART_CTRL2_DMAONERR (1 << 26) 83 #define AUART_CTRL2_TXDMAE (1 << 25) 84 #define AUART_CTRL2_RXDMAE (1 << 24) 85 86 #define AUART_CTRL2_CTSEN (1 << 15) 87 #define AUART_CTRL2_RTSEN (1 << 14) 88 #define AUART_CTRL2_RTS (1 << 11) 89 #define AUART_CTRL2_RXE (1 << 9) 90 #define AUART_CTRL2_TXE (1 << 8) 91 #define AUART_CTRL2_UARTEN (1 << 0) 92 93 #define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16 94 #define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000 95 #define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16) 96 #define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8 97 #define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00 98 #define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8) 99 #define AUART_LINECTRL_WLEN_MASK 0x00000060 100 #define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5) 101 #define AUART_LINECTRL_FEN (1 << 4) 102 #define AUART_LINECTRL_STP2 (1 << 3) 103 #define AUART_LINECTRL_EPS (1 << 2) 104 #define AUART_LINECTRL_PEN (1 << 1) 105 #define AUART_LINECTRL_BRK (1 << 0) 106 107 #define AUART_INTR_RTIEN (1 << 22) 108 #define AUART_INTR_TXIEN (1 << 21) 109 #define AUART_INTR_RXIEN (1 << 20) 110 #define AUART_INTR_CTSMIEN (1 << 17) 111 #define AUART_INTR_RTIS (1 << 6) 112 #define AUART_INTR_TXIS (1 << 5) 113 #define AUART_INTR_RXIS (1 << 4) 114 #define AUART_INTR_CTSMIS (1 << 1) 115 116 #define AUART_STAT_BUSY (1 << 29) 117 #define AUART_STAT_CTS (1 << 28) 118 #define AUART_STAT_TXFE (1 << 27) 119 #define AUART_STAT_TXFF (1 << 25) 120 #define AUART_STAT_RXFE (1 << 24) 121 #define AUART_STAT_OERR (1 << 19) 122 #define AUART_STAT_BERR (1 << 18) 123 #define AUART_STAT_PERR (1 << 17) 124 #define AUART_STAT_FERR (1 << 16) 125 #define AUART_STAT_RXCOUNT_MASK 0xffff 126 127 static struct uart_driver auart_driver; 128 129 enum mxs_auart_type { 130 IMX23_AUART, 131 IMX28_AUART, 132 }; 133 134 struct mxs_auart_port { 135 struct uart_port port; 136 137 #define MXS_AUART_DMA_ENABLED 0x2 138 #define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ 139 #define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ 140 #define MXS_AUART_RTSCTS 4 /* bit 4 */ 141 unsigned long flags; 142 unsigned int ctrl; 143 enum mxs_auart_type devtype; 144 145 unsigned int irq; 146 147 struct clk *clk; 148 struct device *dev; 149 150 /* for DMA */ 151 struct scatterlist tx_sgl; 152 struct dma_chan *tx_dma_chan; 153 void *tx_dma_buf; 154 155 struct scatterlist rx_sgl; 156 struct dma_chan *rx_dma_chan; 157 void *rx_dma_buf; 158 }; 159 160 static struct platform_device_id mxs_auart_devtype[] = { 161 { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART }, 162 { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART }, 163 { /* sentinel */ } 164 }; 165 MODULE_DEVICE_TABLE(platform, mxs_auart_devtype); 166 167 static struct of_device_id mxs_auart_dt_ids[] = { 168 { 169 .compatible = "fsl,imx28-auart", 170 .data = &mxs_auart_devtype[IMX28_AUART] 171 }, { 172 .compatible = "fsl,imx23-auart", 173 .data = &mxs_auart_devtype[IMX23_AUART] 174 }, { /* sentinel */ } 175 }; 176 MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); 177 178 static inline int is_imx28_auart(struct mxs_auart_port *s) 179 { 180 return s->devtype == IMX28_AUART; 181 } 182 183 static inline bool auart_dma_enabled(struct mxs_auart_port *s) 184 { 185 return s->flags & MXS_AUART_DMA_ENABLED; 186 } 187 188 static void mxs_auart_stop_tx(struct uart_port *u); 189 190 #define to_auart_port(u) container_of(u, struct mxs_auart_port, port) 191 192 static void mxs_auart_tx_chars(struct mxs_auart_port *s); 193 194 static void dma_tx_callback(void *param) 195 { 196 struct mxs_auart_port *s = param; 197 struct circ_buf *xmit = &s->port.state->xmit; 198 199 dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE); 200 201 /* clear the bit used to serialize the DMA tx. */ 202 clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); 203 smp_mb__after_clear_bit(); 204 205 /* wake up the possible processes. */ 206 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 207 uart_write_wakeup(&s->port); 208 209 mxs_auart_tx_chars(s); 210 } 211 212 static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size) 213 { 214 struct dma_async_tx_descriptor *desc; 215 struct scatterlist *sgl = &s->tx_sgl; 216 struct dma_chan *channel = s->tx_dma_chan; 217 u32 pio; 218 219 /* [1] : send PIO. Note, the first pio word is CTRL1. */ 220 pio = AUART_CTRL1_XFER_COUNT(size); 221 desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio, 222 1, DMA_TRANS_NONE, 0); 223 if (!desc) { 224 dev_err(s->dev, "step 1 error\n"); 225 return -EINVAL; 226 } 227 228 /* [2] : set DMA buffer. */ 229 sg_init_one(sgl, s->tx_dma_buf, size); 230 dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE); 231 desc = dmaengine_prep_slave_sg(channel, sgl, 232 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 233 if (!desc) { 234 dev_err(s->dev, "step 2 error\n"); 235 return -EINVAL; 236 } 237 238 /* [3] : submit the DMA */ 239 desc->callback = dma_tx_callback; 240 desc->callback_param = s; 241 dmaengine_submit(desc); 242 dma_async_issue_pending(channel); 243 return 0; 244 } 245 246 static void mxs_auart_tx_chars(struct mxs_auart_port *s) 247 { 248 struct circ_buf *xmit = &s->port.state->xmit; 249 250 if (auart_dma_enabled(s)) { 251 u32 i = 0; 252 int size; 253 void *buffer = s->tx_dma_buf; 254 255 if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags)) 256 return; 257 258 while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { 259 size = min_t(u32, UART_XMIT_SIZE - i, 260 CIRC_CNT_TO_END(xmit->head, 261 xmit->tail, 262 UART_XMIT_SIZE)); 263 memcpy(buffer + i, xmit->buf + xmit->tail, size); 264 xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1); 265 266 i += size; 267 if (i >= UART_XMIT_SIZE) 268 break; 269 } 270 271 if (uart_tx_stopped(&s->port)) 272 mxs_auart_stop_tx(&s->port); 273 274 if (i) { 275 mxs_auart_dma_tx(s, i); 276 } else { 277 clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); 278 smp_mb__after_clear_bit(); 279 } 280 return; 281 } 282 283 284 while (!(readl(s->port.membase + AUART_STAT) & 285 AUART_STAT_TXFF)) { 286 if (s->port.x_char) { 287 s->port.icount.tx++; 288 writel(s->port.x_char, 289 s->port.membase + AUART_DATA); 290 s->port.x_char = 0; 291 continue; 292 } 293 if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { 294 s->port.icount.tx++; 295 writel(xmit->buf[xmit->tail], 296 s->port.membase + AUART_DATA); 297 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 298 } else 299 break; 300 } 301 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 302 uart_write_wakeup(&s->port); 303 304 if (uart_circ_empty(&(s->port.state->xmit))) 305 writel(AUART_INTR_TXIEN, 306 s->port.membase + AUART_INTR_CLR); 307 else 308 writel(AUART_INTR_TXIEN, 309 s->port.membase + AUART_INTR_SET); 310 311 if (uart_tx_stopped(&s->port)) 312 mxs_auart_stop_tx(&s->port); 313 } 314 315 static void mxs_auart_rx_char(struct mxs_auart_port *s) 316 { 317 int flag; 318 u32 stat; 319 u8 c; 320 321 c = readl(s->port.membase + AUART_DATA); 322 stat = readl(s->port.membase + AUART_STAT); 323 324 flag = TTY_NORMAL; 325 s->port.icount.rx++; 326 327 if (stat & AUART_STAT_BERR) { 328 s->port.icount.brk++; 329 if (uart_handle_break(&s->port)) 330 goto out; 331 } else if (stat & AUART_STAT_PERR) { 332 s->port.icount.parity++; 333 } else if (stat & AUART_STAT_FERR) { 334 s->port.icount.frame++; 335 } 336 337 /* 338 * Mask off conditions which should be ingored. 339 */ 340 stat &= s->port.read_status_mask; 341 342 if (stat & AUART_STAT_BERR) { 343 flag = TTY_BREAK; 344 } else if (stat & AUART_STAT_PERR) 345 flag = TTY_PARITY; 346 else if (stat & AUART_STAT_FERR) 347 flag = TTY_FRAME; 348 349 if (stat & AUART_STAT_OERR) 350 s->port.icount.overrun++; 351 352 if (uart_handle_sysrq_char(&s->port, c)) 353 goto out; 354 355 uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag); 356 out: 357 writel(stat, s->port.membase + AUART_STAT); 358 } 359 360 static void mxs_auart_rx_chars(struct mxs_auart_port *s) 361 { 362 u32 stat = 0; 363 364 for (;;) { 365 stat = readl(s->port.membase + AUART_STAT); 366 if (stat & AUART_STAT_RXFE) 367 break; 368 mxs_auart_rx_char(s); 369 } 370 371 writel(stat, s->port.membase + AUART_STAT); 372 tty_flip_buffer_push(&s->port.state->port); 373 } 374 375 static int mxs_auart_request_port(struct uart_port *u) 376 { 377 return 0; 378 } 379 380 static int mxs_auart_verify_port(struct uart_port *u, 381 struct serial_struct *ser) 382 { 383 if (u->type != PORT_UNKNOWN && u->type != PORT_IMX) 384 return -EINVAL; 385 return 0; 386 } 387 388 static void mxs_auart_config_port(struct uart_port *u, int flags) 389 { 390 } 391 392 static const char *mxs_auart_type(struct uart_port *u) 393 { 394 struct mxs_auart_port *s = to_auart_port(u); 395 396 return dev_name(s->dev); 397 } 398 399 static void mxs_auart_release_port(struct uart_port *u) 400 { 401 } 402 403 static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) 404 { 405 struct mxs_auart_port *s = to_auart_port(u); 406 407 u32 ctrl = readl(u->membase + AUART_CTRL2); 408 409 ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); 410 if (mctrl & TIOCM_RTS) { 411 if (tty_port_cts_enabled(&u->state->port)) 412 ctrl |= AUART_CTRL2_RTSEN; 413 else 414 ctrl |= AUART_CTRL2_RTS; 415 } 416 417 s->ctrl = mctrl; 418 writel(ctrl, u->membase + AUART_CTRL2); 419 } 420 421 static u32 mxs_auart_get_mctrl(struct uart_port *u) 422 { 423 struct mxs_auart_port *s = to_auart_port(u); 424 u32 stat = readl(u->membase + AUART_STAT); 425 int ctrl2 = readl(u->membase + AUART_CTRL2); 426 u32 mctrl = s->ctrl; 427 428 mctrl &= ~TIOCM_CTS; 429 if (stat & AUART_STAT_CTS) 430 mctrl |= TIOCM_CTS; 431 432 if (ctrl2 & AUART_CTRL2_RTS) 433 mctrl |= TIOCM_RTS; 434 435 return mctrl; 436 } 437 438 static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s); 439 static void dma_rx_callback(void *arg) 440 { 441 struct mxs_auart_port *s = (struct mxs_auart_port *) arg; 442 struct tty_port *port = &s->port.state->port; 443 int count; 444 u32 stat; 445 446 dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE); 447 448 stat = readl(s->port.membase + AUART_STAT); 449 stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR | 450 AUART_STAT_PERR | AUART_STAT_FERR); 451 452 count = stat & AUART_STAT_RXCOUNT_MASK; 453 tty_insert_flip_string(port, s->rx_dma_buf, count); 454 455 writel(stat, s->port.membase + AUART_STAT); 456 tty_flip_buffer_push(port); 457 458 /* start the next DMA for RX. */ 459 mxs_auart_dma_prep_rx(s); 460 } 461 462 static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s) 463 { 464 struct dma_async_tx_descriptor *desc; 465 struct scatterlist *sgl = &s->rx_sgl; 466 struct dma_chan *channel = s->rx_dma_chan; 467 u32 pio[1]; 468 469 /* [1] : send PIO */ 470 pio[0] = AUART_CTRL0_RXTO_ENABLE 471 | AUART_CTRL0_RXTIMEOUT(0x80) 472 | AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE); 473 desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, 474 1, DMA_TRANS_NONE, 0); 475 if (!desc) { 476 dev_err(s->dev, "step 1 error\n"); 477 return -EINVAL; 478 } 479 480 /* [2] : send DMA request */ 481 sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE); 482 dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE); 483 desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM, 484 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 485 if (!desc) { 486 dev_err(s->dev, "step 2 error\n"); 487 return -1; 488 } 489 490 /* [3] : submit the DMA, but do not issue it. */ 491 desc->callback = dma_rx_callback; 492 desc->callback_param = s; 493 dmaengine_submit(desc); 494 dma_async_issue_pending(channel); 495 return 0; 496 } 497 498 static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s) 499 { 500 if (s->tx_dma_chan) { 501 dma_release_channel(s->tx_dma_chan); 502 s->tx_dma_chan = NULL; 503 } 504 if (s->rx_dma_chan) { 505 dma_release_channel(s->rx_dma_chan); 506 s->rx_dma_chan = NULL; 507 } 508 509 kfree(s->tx_dma_buf); 510 kfree(s->rx_dma_buf); 511 s->tx_dma_buf = NULL; 512 s->rx_dma_buf = NULL; 513 } 514 515 static void mxs_auart_dma_exit(struct mxs_auart_port *s) 516 { 517 518 writel(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR, 519 s->port.membase + AUART_CTRL2_CLR); 520 521 mxs_auart_dma_exit_channel(s); 522 s->flags &= ~MXS_AUART_DMA_ENABLED; 523 clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); 524 clear_bit(MXS_AUART_DMA_RX_READY, &s->flags); 525 } 526 527 static int mxs_auart_dma_init(struct mxs_auart_port *s) 528 { 529 if (auart_dma_enabled(s)) 530 return 0; 531 532 /* init for RX */ 533 s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx"); 534 if (!s->rx_dma_chan) 535 goto err_out; 536 s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); 537 if (!s->rx_dma_buf) 538 goto err_out; 539 540 /* init for TX */ 541 s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx"); 542 if (!s->tx_dma_chan) 543 goto err_out; 544 s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); 545 if (!s->tx_dma_buf) 546 goto err_out; 547 548 /* set the flags */ 549 s->flags |= MXS_AUART_DMA_ENABLED; 550 dev_dbg(s->dev, "enabled the DMA support."); 551 552 /* The DMA buffer is now the FIFO the TTY subsystem can use */ 553 s->port.fifosize = UART_XMIT_SIZE; 554 555 return 0; 556 557 err_out: 558 mxs_auart_dma_exit_channel(s); 559 return -EINVAL; 560 561 } 562 563 static void mxs_auart_settermios(struct uart_port *u, 564 struct ktermios *termios, 565 struct ktermios *old) 566 { 567 struct mxs_auart_port *s = to_auart_port(u); 568 u32 bm, ctrl, ctrl2, div; 569 unsigned int cflag, baud; 570 571 cflag = termios->c_cflag; 572 573 ctrl = AUART_LINECTRL_FEN; 574 ctrl2 = readl(u->membase + AUART_CTRL2); 575 576 /* byte size */ 577 switch (cflag & CSIZE) { 578 case CS5: 579 bm = 0; 580 break; 581 case CS6: 582 bm = 1; 583 break; 584 case CS7: 585 bm = 2; 586 break; 587 case CS8: 588 bm = 3; 589 break; 590 default: 591 return; 592 } 593 594 ctrl |= AUART_LINECTRL_WLEN(bm); 595 596 /* parity */ 597 if (cflag & PARENB) { 598 ctrl |= AUART_LINECTRL_PEN; 599 if ((cflag & PARODD) == 0) 600 ctrl |= AUART_LINECTRL_EPS; 601 } 602 603 u->read_status_mask = 0; 604 605 if (termios->c_iflag & INPCK) 606 u->read_status_mask |= AUART_STAT_PERR; 607 if (termios->c_iflag & (BRKINT | PARMRK)) 608 u->read_status_mask |= AUART_STAT_BERR; 609 610 /* 611 * Characters to ignore 612 */ 613 u->ignore_status_mask = 0; 614 if (termios->c_iflag & IGNPAR) 615 u->ignore_status_mask |= AUART_STAT_PERR; 616 if (termios->c_iflag & IGNBRK) { 617 u->ignore_status_mask |= AUART_STAT_BERR; 618 /* 619 * If we're ignoring parity and break indicators, 620 * ignore overruns too (for real raw support). 621 */ 622 if (termios->c_iflag & IGNPAR) 623 u->ignore_status_mask |= AUART_STAT_OERR; 624 } 625 626 /* 627 * ignore all characters if CREAD is not set 628 */ 629 if (cflag & CREAD) 630 ctrl2 |= AUART_CTRL2_RXE; 631 else 632 ctrl2 &= ~AUART_CTRL2_RXE; 633 634 /* figure out the stop bits requested */ 635 if (cflag & CSTOPB) 636 ctrl |= AUART_LINECTRL_STP2; 637 638 /* figure out the hardware flow control settings */ 639 if (cflag & CRTSCTS) { 640 /* 641 * The DMA has a bug(see errata:2836) in mx23. 642 * So we can not implement the DMA for auart in mx23, 643 * we can only implement the DMA support for auart 644 * in mx28. 645 */ 646 if (is_imx28_auart(s) 647 && test_bit(MXS_AUART_RTSCTS, &s->flags)) { 648 if (!mxs_auart_dma_init(s)) 649 /* enable DMA tranfer */ 650 ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE 651 | AUART_CTRL2_DMAONERR; 652 } 653 ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; 654 } else { 655 ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); 656 } 657 658 /* set baud rate */ 659 baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); 660 div = u->uartclk * 32 / baud; 661 ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F); 662 ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6); 663 664 writel(ctrl, u->membase + AUART_LINECTRL); 665 writel(ctrl2, u->membase + AUART_CTRL2); 666 667 uart_update_timeout(u, termios->c_cflag, baud); 668 669 /* prepare for the DMA RX. */ 670 if (auart_dma_enabled(s) && 671 !test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) { 672 if (!mxs_auart_dma_prep_rx(s)) { 673 /* Disable the normal RX interrupt. */ 674 writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN, 675 u->membase + AUART_INTR_CLR); 676 } else { 677 mxs_auart_dma_exit(s); 678 dev_err(s->dev, "We can not start up the DMA.\n"); 679 } 680 } 681 } 682 683 static irqreturn_t mxs_auart_irq_handle(int irq, void *context) 684 { 685 u32 istat; 686 struct mxs_auart_port *s = context; 687 u32 stat = readl(s->port.membase + AUART_STAT); 688 689 istat = readl(s->port.membase + AUART_INTR); 690 691 /* ack irq */ 692 writel(istat & (AUART_INTR_RTIS 693 | AUART_INTR_TXIS 694 | AUART_INTR_RXIS 695 | AUART_INTR_CTSMIS), 696 s->port.membase + AUART_INTR_CLR); 697 698 if (istat & AUART_INTR_CTSMIS) { 699 uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS); 700 writel(AUART_INTR_CTSMIS, 701 s->port.membase + AUART_INTR_CLR); 702 istat &= ~AUART_INTR_CTSMIS; 703 } 704 705 if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) { 706 if (!auart_dma_enabled(s)) 707 mxs_auart_rx_chars(s); 708 istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS); 709 } 710 711 if (istat & AUART_INTR_TXIS) { 712 mxs_auart_tx_chars(s); 713 istat &= ~AUART_INTR_TXIS; 714 } 715 716 return IRQ_HANDLED; 717 } 718 719 static void mxs_auart_reset(struct uart_port *u) 720 { 721 int i; 722 unsigned int reg; 723 724 writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_CLR); 725 726 for (i = 0; i < 10000; i++) { 727 reg = readl(u->membase + AUART_CTRL0); 728 if (!(reg & AUART_CTRL0_SFTRST)) 729 break; 730 udelay(3); 731 } 732 writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); 733 } 734 735 static int mxs_auart_startup(struct uart_port *u) 736 { 737 struct mxs_auart_port *s = to_auart_port(u); 738 739 clk_prepare_enable(s->clk); 740 741 writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); 742 743 writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET); 744 745 writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, 746 u->membase + AUART_INTR); 747 748 /* Reset FIFO size (it could have changed if DMA was enabled) */ 749 u->fifosize = MXS_AUART_FIFO_SIZE; 750 751 /* 752 * Enable fifo so all four bytes of a DMA word are written to 753 * output (otherwise, only the LSB is written, ie. 1 in 4 bytes) 754 */ 755 writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET); 756 757 return 0; 758 } 759 760 static void mxs_auart_shutdown(struct uart_port *u) 761 { 762 struct mxs_auart_port *s = to_auart_port(u); 763 764 if (auart_dma_enabled(s)) 765 mxs_auart_dma_exit(s); 766 767 writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR); 768 769 writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, 770 u->membase + AUART_INTR_CLR); 771 772 writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET); 773 774 clk_disable_unprepare(s->clk); 775 } 776 777 static unsigned int mxs_auart_tx_empty(struct uart_port *u) 778 { 779 if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE) 780 return TIOCSER_TEMT; 781 else 782 return 0; 783 } 784 785 static void mxs_auart_start_tx(struct uart_port *u) 786 { 787 struct mxs_auart_port *s = to_auart_port(u); 788 789 /* enable transmitter */ 790 writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_SET); 791 792 mxs_auart_tx_chars(s); 793 } 794 795 static void mxs_auart_stop_tx(struct uart_port *u) 796 { 797 writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_CLR); 798 } 799 800 static void mxs_auart_stop_rx(struct uart_port *u) 801 { 802 writel(AUART_CTRL2_RXE, u->membase + AUART_CTRL2_CLR); 803 } 804 805 static void mxs_auart_break_ctl(struct uart_port *u, int ctl) 806 { 807 if (ctl) 808 writel(AUART_LINECTRL_BRK, 809 u->membase + AUART_LINECTRL_SET); 810 else 811 writel(AUART_LINECTRL_BRK, 812 u->membase + AUART_LINECTRL_CLR); 813 } 814 815 static void mxs_auart_enable_ms(struct uart_port *port) 816 { 817 /* just empty */ 818 } 819 820 static struct uart_ops mxs_auart_ops = { 821 .tx_empty = mxs_auart_tx_empty, 822 .start_tx = mxs_auart_start_tx, 823 .stop_tx = mxs_auart_stop_tx, 824 .stop_rx = mxs_auart_stop_rx, 825 .enable_ms = mxs_auart_enable_ms, 826 .break_ctl = mxs_auart_break_ctl, 827 .set_mctrl = mxs_auart_set_mctrl, 828 .get_mctrl = mxs_auart_get_mctrl, 829 .startup = mxs_auart_startup, 830 .shutdown = mxs_auart_shutdown, 831 .set_termios = mxs_auart_settermios, 832 .type = mxs_auart_type, 833 .release_port = mxs_auart_release_port, 834 .request_port = mxs_auart_request_port, 835 .config_port = mxs_auart_config_port, 836 .verify_port = mxs_auart_verify_port, 837 }; 838 839 static struct mxs_auart_port *auart_port[MXS_AUART_PORTS]; 840 841 #ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE 842 static void mxs_auart_console_putchar(struct uart_port *port, int ch) 843 { 844 unsigned int to = 1000; 845 846 while (readl(port->membase + AUART_STAT) & AUART_STAT_TXFF) { 847 if (!to--) 848 break; 849 udelay(1); 850 } 851 852 writel(ch, port->membase + AUART_DATA); 853 } 854 855 static void 856 auart_console_write(struct console *co, const char *str, unsigned int count) 857 { 858 struct mxs_auart_port *s; 859 struct uart_port *port; 860 unsigned int old_ctrl0, old_ctrl2; 861 unsigned int to = 20000; 862 863 if (co->index >= MXS_AUART_PORTS || co->index < 0) 864 return; 865 866 s = auart_port[co->index]; 867 port = &s->port; 868 869 clk_enable(s->clk); 870 871 /* First save the CR then disable the interrupts */ 872 old_ctrl2 = readl(port->membase + AUART_CTRL2); 873 old_ctrl0 = readl(port->membase + AUART_CTRL0); 874 875 writel(AUART_CTRL0_CLKGATE, 876 port->membase + AUART_CTRL0_CLR); 877 writel(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, 878 port->membase + AUART_CTRL2_SET); 879 880 uart_console_write(port, str, count, mxs_auart_console_putchar); 881 882 /* Finally, wait for transmitter to become empty ... */ 883 while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) { 884 udelay(1); 885 if (!to--) 886 break; 887 } 888 889 /* 890 * ... and restore the TCR if we waited long enough for the transmitter 891 * to be idle. This might keep the transmitter enabled although it is 892 * unused, but that is better than to disable it while it is still 893 * transmitting. 894 */ 895 if (!(readl(port->membase + AUART_STAT) & AUART_STAT_BUSY)) { 896 writel(old_ctrl0, port->membase + AUART_CTRL0); 897 writel(old_ctrl2, port->membase + AUART_CTRL2); 898 } 899 900 clk_disable(s->clk); 901 } 902 903 static void __init 904 auart_console_get_options(struct uart_port *port, int *baud, 905 int *parity, int *bits) 906 { 907 unsigned int lcr_h, quot; 908 909 if (!(readl(port->membase + AUART_CTRL2) & AUART_CTRL2_UARTEN)) 910 return; 911 912 lcr_h = readl(port->membase + AUART_LINECTRL); 913 914 *parity = 'n'; 915 if (lcr_h & AUART_LINECTRL_PEN) { 916 if (lcr_h & AUART_LINECTRL_EPS) 917 *parity = 'e'; 918 else 919 *parity = 'o'; 920 } 921 922 if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2)) 923 *bits = 7; 924 else 925 *bits = 8; 926 927 quot = ((readl(port->membase + AUART_LINECTRL) 928 & AUART_LINECTRL_BAUD_DIVINT_MASK)) 929 >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6); 930 quot |= ((readl(port->membase + AUART_LINECTRL) 931 & AUART_LINECTRL_BAUD_DIVFRAC_MASK)) 932 >> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT; 933 if (quot == 0) 934 quot = 1; 935 936 *baud = (port->uartclk << 2) / quot; 937 } 938 939 static int __init 940 auart_console_setup(struct console *co, char *options) 941 { 942 struct mxs_auart_port *s; 943 int baud = 9600; 944 int bits = 8; 945 int parity = 'n'; 946 int flow = 'n'; 947 int ret; 948 949 /* 950 * Check whether an invalid uart number has been specified, and 951 * if so, search for the first available port that does have 952 * console support. 953 */ 954 if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port)) 955 co->index = 0; 956 s = auart_port[co->index]; 957 if (!s) 958 return -ENODEV; 959 960 clk_prepare_enable(s->clk); 961 962 if (options) 963 uart_parse_options(options, &baud, &parity, &bits, &flow); 964 else 965 auart_console_get_options(&s->port, &baud, &parity, &bits); 966 967 ret = uart_set_options(&s->port, co, baud, parity, bits, flow); 968 969 clk_disable_unprepare(s->clk); 970 971 return ret; 972 } 973 974 static struct console auart_console = { 975 .name = "ttyAPP", 976 .write = auart_console_write, 977 .device = uart_console_device, 978 .setup = auart_console_setup, 979 .flags = CON_PRINTBUFFER, 980 .index = -1, 981 .data = &auart_driver, 982 }; 983 #endif 984 985 static struct uart_driver auart_driver = { 986 .owner = THIS_MODULE, 987 .driver_name = "ttyAPP", 988 .dev_name = "ttyAPP", 989 .major = 0, 990 .minor = 0, 991 .nr = MXS_AUART_PORTS, 992 #ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE 993 .cons = &auart_console, 994 #endif 995 }; 996 997 /* 998 * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it 999 * could successfully get all information from dt or a negative errno. 1000 */ 1001 static int serial_mxs_probe_dt(struct mxs_auart_port *s, 1002 struct platform_device *pdev) 1003 { 1004 struct device_node *np = pdev->dev.of_node; 1005 int ret; 1006 1007 if (!np) 1008 /* no device tree device */ 1009 return 1; 1010 1011 ret = of_alias_get_id(np, "serial"); 1012 if (ret < 0) { 1013 dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); 1014 return ret; 1015 } 1016 s->port.line = ret; 1017 1018 if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) 1019 set_bit(MXS_AUART_RTSCTS, &s->flags); 1020 1021 return 0; 1022 } 1023 1024 static int mxs_auart_probe(struct platform_device *pdev) 1025 { 1026 const struct of_device_id *of_id = 1027 of_match_device(mxs_auart_dt_ids, &pdev->dev); 1028 struct mxs_auart_port *s; 1029 u32 version; 1030 int ret = 0; 1031 struct resource *r; 1032 1033 s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); 1034 if (!s) { 1035 ret = -ENOMEM; 1036 goto out; 1037 } 1038 1039 ret = serial_mxs_probe_dt(s, pdev); 1040 if (ret > 0) 1041 s->port.line = pdev->id < 0 ? 0 : pdev->id; 1042 else if (ret < 0) 1043 goto out_free; 1044 1045 if (of_id) { 1046 pdev->id_entry = of_id->data; 1047 s->devtype = pdev->id_entry->driver_data; 1048 } 1049 1050 s->clk = clk_get(&pdev->dev, NULL); 1051 if (IS_ERR(s->clk)) { 1052 ret = PTR_ERR(s->clk); 1053 goto out_free; 1054 } 1055 1056 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1057 if (!r) { 1058 ret = -ENXIO; 1059 goto out_free_clk; 1060 } 1061 1062 s->port.mapbase = r->start; 1063 s->port.membase = ioremap(r->start, resource_size(r)); 1064 s->port.ops = &mxs_auart_ops; 1065 s->port.iotype = UPIO_MEM; 1066 s->port.fifosize = MXS_AUART_FIFO_SIZE; 1067 s->port.uartclk = clk_get_rate(s->clk); 1068 s->port.type = PORT_IMX; 1069 s->port.dev = s->dev = &pdev->dev; 1070 1071 s->ctrl = 0; 1072 1073 s->irq = platform_get_irq(pdev, 0); 1074 s->port.irq = s->irq; 1075 ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s); 1076 if (ret) 1077 goto out_free_clk; 1078 1079 platform_set_drvdata(pdev, s); 1080 1081 auart_port[s->port.line] = s; 1082 1083 mxs_auart_reset(&s->port); 1084 1085 ret = uart_add_one_port(&auart_driver, &s->port); 1086 if (ret) 1087 goto out_free_irq; 1088 1089 version = readl(s->port.membase + AUART_VERSION); 1090 dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n", 1091 (version >> 24) & 0xff, 1092 (version >> 16) & 0xff, version & 0xffff); 1093 1094 return 0; 1095 1096 out_free_irq: 1097 auart_port[pdev->id] = NULL; 1098 free_irq(s->irq, s); 1099 out_free_clk: 1100 clk_put(s->clk); 1101 out_free: 1102 kfree(s); 1103 out: 1104 return ret; 1105 } 1106 1107 static int mxs_auart_remove(struct platform_device *pdev) 1108 { 1109 struct mxs_auart_port *s = platform_get_drvdata(pdev); 1110 1111 uart_remove_one_port(&auart_driver, &s->port); 1112 1113 auart_port[pdev->id] = NULL; 1114 1115 clk_put(s->clk); 1116 free_irq(s->irq, s); 1117 kfree(s); 1118 1119 return 0; 1120 } 1121 1122 static struct platform_driver mxs_auart_driver = { 1123 .probe = mxs_auart_probe, 1124 .remove = mxs_auart_remove, 1125 .driver = { 1126 .name = "mxs-auart", 1127 .owner = THIS_MODULE, 1128 .of_match_table = mxs_auart_dt_ids, 1129 }, 1130 }; 1131 1132 static int __init mxs_auart_init(void) 1133 { 1134 int r; 1135 1136 r = uart_register_driver(&auart_driver); 1137 if (r) 1138 goto out; 1139 1140 r = platform_driver_register(&mxs_auart_driver); 1141 if (r) 1142 goto out_err; 1143 1144 return 0; 1145 out_err: 1146 uart_unregister_driver(&auart_driver); 1147 out: 1148 return r; 1149 } 1150 1151 static void __exit mxs_auart_exit(void) 1152 { 1153 platform_driver_unregister(&mxs_auart_driver); 1154 uart_unregister_driver(&auart_driver); 1155 } 1156 1157 module_init(mxs_auart_init); 1158 module_exit(mxs_auart_exit); 1159 MODULE_LICENSE("GPL"); 1160 MODULE_DESCRIPTION("Freescale MXS application uart driver"); 1161 MODULE_ALIAS("platform:mxs-auart"); 1162